1 | ! |
---|
2 | MODULE cpl_mod |
---|
3 | ! |
---|
4 | ! This module excahanges and transforms all fields that should be recieved or sent to |
---|
5 | ! coupler. The transformation of the fields are done from the grid 1D-array in phylmd |
---|
6 | ! to the regular 2D grid accepted by the coupler. Cumulation of the fields for each |
---|
7 | ! timestep is done in here. |
---|
8 | ! |
---|
9 | ! Each type of surface that recevie fields from the coupler have a subroutine named |
---|
10 | ! cpl_receive_XXX_fields and each surface that have fields to be sent to the coupler |
---|
11 | ! have a subroutine named cpl_send_XXX_fields. |
---|
12 | ! |
---|
13 | !************************************************************************************* |
---|
14 | |
---|
15 | ! Use statements |
---|
16 | !************************************************************************************* |
---|
17 | USE dimphy, ONLY : klon |
---|
18 | USE mod_phys_lmdz_para |
---|
19 | USE ioipsl |
---|
20 | USE iophy |
---|
21 | |
---|
22 | ! The module oasis is always used. Without the cpp key CPP_COUPLE only the parameters |
---|
23 | ! in the module are compiled and not the subroutines. |
---|
24 | USE oasis |
---|
25 | USE write_field_phy |
---|
26 | USE control_mod |
---|
27 | |
---|
28 | |
---|
29 | ! Global attributes |
---|
30 | !************************************************************************************* |
---|
31 | IMPLICIT NONE |
---|
32 | PRIVATE |
---|
33 | |
---|
34 | ! All subroutine are public except cpl_send_all |
---|
35 | PUBLIC :: cpl_init, cpl_receive_frac, cpl_receive_ocean_fields, cpl_receive_seaice_fields, & |
---|
36 | cpl_send_ocean_fields, cpl_send_seaice_fields, cpl_send_land_fields, & |
---|
37 | cpl_send_landice_fields, gath2cpl |
---|
38 | |
---|
39 | |
---|
40 | ! Declaration of module variables |
---|
41 | !************************************************************************************* |
---|
42 | ! variable for coupling period |
---|
43 | INTEGER, SAVE :: nexca |
---|
44 | !$OMP THREADPRIVATE(nexca) |
---|
45 | |
---|
46 | ! variables for cumulating fields during a coupling periode : |
---|
47 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_sols, cpl_nsol, cpl_rain |
---|
48 | !$OMP THREADPRIVATE(cpl_sols,cpl_nsol,cpl_rain) |
---|
49 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_snow, cpl_evap, cpl_tsol |
---|
50 | !$OMP THREADPRIVATE(cpl_snow,cpl_evap,cpl_tsol) |
---|
51 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_fder, cpl_albe, cpl_taux, cpl_tauy |
---|
52 | !$OMP THREADPRIVATE(cpl_fder,cpl_albe,cpl_taux,cpl_tauy) |
---|
53 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp |
---|
54 | !$OMP THREADPRIVATE(cpl_windsp) |
---|
55 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_taumod |
---|
56 | !$OMP THREADPRIVATE(cpl_taumod) |
---|
57 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co2 |
---|
58 | !$OMP THREADPRIVATE(cpl_atm_co2) |
---|
59 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_rriv2D, cpl_rcoa2D, cpl_rlic2D |
---|
60 | !$OMP THREADPRIVATE(cpl_rriv2D,cpl_rcoa2D,cpl_rlic2D) |
---|
61 | |
---|
62 | ! variables read from coupler : |
---|
63 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sst ! sea surface temperature |
---|
64 | !$OMP THREADPRIVATE(read_sst) |
---|
65 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sit ! sea ice temperature |
---|
66 | !$OMP THREADPRIVATE(read_sit) |
---|
67 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sic ! sea ice fraction |
---|
68 | !$OMP THREADPRIVATE(read_sic) |
---|
69 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_alb_sic ! albedo at sea ice |
---|
70 | !$OMP THREADPRIVATE(read_alb_sic) |
---|
71 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_u0, read_v0 ! ocean surface current |
---|
72 | !$OMP THREADPRIVATE(read_u0,read_v0) |
---|
73 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_co2 ! ocean co2 flux |
---|
74 | !$OMP THREADPRIVATE(read_co2) |
---|
75 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: unity |
---|
76 | !$OMP THREADPRIVATE(unity) |
---|
77 | INTEGER, SAVE :: nidct, nidcs |
---|
78 | !$OMP THREADPRIVATE(nidct,nidcs) |
---|
79 | |
---|
80 | ! variables to be sent to the coupler |
---|
81 | REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_sols2D, cpl_nsol2D, cpl_rain2D |
---|
82 | !$OMP THREADPRIVATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D) |
---|
83 | REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_snow2D, cpl_evap2D, cpl_tsol2D |
---|
84 | !$OMP THREADPRIVATE(cpl_snow2D, cpl_evap2D, cpl_tsol2D) |
---|
85 | REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_fder2D, cpl_albe2D |
---|
86 | !$OMP THREADPRIVATE(cpl_fder2D, cpl_albe2D) |
---|
87 | REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taux2D, cpl_tauy2D |
---|
88 | !$OMP THREADPRIVATE(cpl_taux2D, cpl_tauy2D) |
---|
89 | REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taumod2D |
---|
90 | !$OMP THREADPRIVATE(cpl_taumod2D) |
---|
91 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp2D |
---|
92 | !$OMP THREADPRIVATE(cpl_windsp2D) |
---|
93 | REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co22D |
---|
94 | !$OMP THREADPRIVATE(cpl_atm_co22D) |
---|
95 | |
---|
96 | CONTAINS |
---|
97 | ! |
---|
98 | !************************************************************************************ |
---|
99 | ! |
---|
100 | SUBROUTINE cpl_init(dtime, rlon, rlat) |
---|
101 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day |
---|
102 | USE surface_data |
---|
103 | |
---|
104 | INCLUDE "dimensions.h" |
---|
105 | INCLUDE "indicesol.h" |
---|
106 | INCLUDE "temps.h" |
---|
107 | INCLUDE "iniprint.h" |
---|
108 | |
---|
109 | ! Input arguments |
---|
110 | !************************************************************************************* |
---|
111 | REAL, INTENT(IN) :: dtime |
---|
112 | REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat |
---|
113 | |
---|
114 | ! Local variables |
---|
115 | !************************************************************************************* |
---|
116 | INTEGER :: error, sum_error, ig, i |
---|
117 | INTEGER :: jf, nhoridct |
---|
118 | INTEGER :: nhoridcs |
---|
119 | INTEGER :: idtime |
---|
120 | INTEGER :: idayref |
---|
121 | INTEGER :: npas ! only for OASIS2 |
---|
122 | REAL :: zjulian |
---|
123 | REAL, DIMENSION(iim,jjm+1) :: zx_lon, zx_lat |
---|
124 | CHARACTER(len = 20) :: modname = 'cpl_init' |
---|
125 | CHARACTER(len = 80) :: abort_message |
---|
126 | CHARACTER(len=80) :: clintocplnam, clfromcplnam |
---|
127 | |
---|
128 | !************************************************************************************* |
---|
129 | ! Calculate coupling period |
---|
130 | ! |
---|
131 | !************************************************************************************* |
---|
132 | |
---|
133 | npas = itaufin/ iphysiq |
---|
134 | nexca = 86400 / dtime |
---|
135 | WRITE(lunout,*)' ##### Ocean couple #####' |
---|
136 | WRITE(lunout,*)' Valeurs des pas de temps' |
---|
137 | WRITE(lunout,*)' npas = ', npas |
---|
138 | WRITE(lunout,*)' nexca = ', nexca |
---|
139 | |
---|
140 | !************************************************************************************* |
---|
141 | ! Allocate variables |
---|
142 | ! |
---|
143 | !************************************************************************************* |
---|
144 | error = 0 |
---|
145 | sum_error = 0 |
---|
146 | |
---|
147 | ALLOCATE(unity(klon), stat = error) |
---|
148 | sum_error = sum_error + error |
---|
149 | ALLOCATE(cpl_sols(klon,2), stat = error) |
---|
150 | sum_error = sum_error + error |
---|
151 | ALLOCATE(cpl_nsol(klon,2), stat = error) |
---|
152 | sum_error = sum_error + error |
---|
153 | ALLOCATE(cpl_rain(klon,2), stat = error) |
---|
154 | sum_error = sum_error + error |
---|
155 | ALLOCATE(cpl_snow(klon,2), stat = error) |
---|
156 | sum_error = sum_error + error |
---|
157 | ALLOCATE(cpl_evap(klon,2), stat = error) |
---|
158 | sum_error = sum_error + error |
---|
159 | ALLOCATE(cpl_tsol(klon,2), stat = error) |
---|
160 | sum_error = sum_error + error |
---|
161 | ALLOCATE(cpl_fder(klon,2), stat = error) |
---|
162 | sum_error = sum_error + error |
---|
163 | ALLOCATE(cpl_albe(klon,2), stat = error) |
---|
164 | sum_error = sum_error + error |
---|
165 | ALLOCATE(cpl_taux(klon,2), stat = error) |
---|
166 | sum_error = sum_error + error |
---|
167 | ALLOCATE(cpl_tauy(klon,2), stat = error) |
---|
168 | sum_error = sum_error + error |
---|
169 | ALLOCATE(cpl_windsp(klon,2), stat = error) |
---|
170 | sum_error = sum_error + error |
---|
171 | ALLOCATE(cpl_taumod(klon,2), stat = error) |
---|
172 | sum_error = sum_error + error |
---|
173 | ALLOCATE(cpl_rriv2D(iim,jj_nb), stat=error) |
---|
174 | sum_error = sum_error + error |
---|
175 | ALLOCATE(cpl_rcoa2D(iim,jj_nb), stat=error) |
---|
176 | sum_error = sum_error + error |
---|
177 | ALLOCATE(cpl_rlic2D(iim,jj_nb), stat=error) |
---|
178 | sum_error = sum_error + error |
---|
179 | ALLOCATE(read_sst(iim, jj_nb), stat = error) |
---|
180 | sum_error = sum_error + error |
---|
181 | ALLOCATE(read_sic(iim, jj_nb), stat = error) |
---|
182 | sum_error = sum_error + error |
---|
183 | ALLOCATE(read_sit(iim, jj_nb), stat = error) |
---|
184 | sum_error = sum_error + error |
---|
185 | ALLOCATE(read_alb_sic(iim, jj_nb), stat = error) |
---|
186 | sum_error = sum_error + error |
---|
187 | ALLOCATE(read_u0(iim, jj_nb), stat = error) |
---|
188 | sum_error = sum_error + error |
---|
189 | ALLOCATE(read_v0(iim, jj_nb), stat = error) |
---|
190 | sum_error = sum_error + error |
---|
191 | |
---|
192 | IF (carbon_cycle_cpl) THEN |
---|
193 | ALLOCATE(read_co2(iim, jj_nb), stat = error) |
---|
194 | sum_error = sum_error + error |
---|
195 | ALLOCATE(cpl_atm_co2(klon,2), stat = error) |
---|
196 | sum_error = sum_error + error |
---|
197 | |
---|
198 | ! Allocate variable in carbon_cycle_mod |
---|
199 | ALLOCATE(fco2_ocn_day(klon), stat = error) |
---|
200 | sum_error = sum_error + error |
---|
201 | END IF |
---|
202 | |
---|
203 | IF (sum_error /= 0) THEN |
---|
204 | abort_message='Pb allocation variables couplees' |
---|
205 | CALL abort_gcm(modname,abort_message,1) |
---|
206 | ENDIF |
---|
207 | !************************************************************************************* |
---|
208 | ! Initialize the allocated varaibles |
---|
209 | ! |
---|
210 | !************************************************************************************* |
---|
211 | DO ig = 1, klon |
---|
212 | unity(ig) = ig |
---|
213 | ENDDO |
---|
214 | |
---|
215 | !************************************************************************************* |
---|
216 | ! Initialize coupling |
---|
217 | ! |
---|
218 | !************************************************************************************* |
---|
219 | idtime = INT(dtime) |
---|
220 | #ifdef CPP_COUPLE |
---|
221 | CALL inicma |
---|
222 | #endif |
---|
223 | |
---|
224 | !************************************************************************************* |
---|
225 | ! initialize NetCDF output |
---|
226 | ! |
---|
227 | !************************************************************************************* |
---|
228 | IF (is_sequential) THEN |
---|
229 | idayref = day_ini |
---|
230 | CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian) |
---|
231 | CALL gr_fi_ecrit(1,klon,iim,jjm+1,rlon,zx_lon) |
---|
232 | DO i = 1, iim |
---|
233 | zx_lon(i,1) = rlon(i+1) |
---|
234 | zx_lon(i,jjm+1) = rlon(i+1) |
---|
235 | ENDDO |
---|
236 | CALL gr_fi_ecrit(1,klon,iim,jjm+1,rlat,zx_lat) |
---|
237 | clintocplnam="cpl_atm_tauflx" |
---|
238 | CALL histbeg(clintocplnam, iim,zx_lon(:,1),jjm+1,zx_lat(1,:),& |
---|
239 | 1,iim,1,jjm+1, itau_phy,zjulian,dtime,nhoridct,nidct) |
---|
240 | ! no vertical axis |
---|
241 | CALL histdef(nidct, 'tauxe','tauxe', & |
---|
242 | "-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
243 | CALL histdef(nidct, 'tauyn','tauyn', & |
---|
244 | "-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
245 | CALL histdef(nidct, 'tmp_lon','tmp_lon', & |
---|
246 | "-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
247 | CALL histdef(nidct, 'tmp_lat','tmp_lat', & |
---|
248 | "-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
249 | DO jf=1,maxsend |
---|
250 | IF (infosend(i)%action) THEN |
---|
251 | CALL histdef(nidct, infosend(i)%name ,infosend(i)%name , & |
---|
252 | "-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
253 | ENDIF |
---|
254 | END DO |
---|
255 | CALL histend(nidct) |
---|
256 | CALL histsync(nidct) |
---|
257 | |
---|
258 | clfromcplnam="cpl_atm_sst" |
---|
259 | CALL histbeg(clfromcplnam, iim,zx_lon(:,1),jjm+1,zx_lat(1,:),1,iim,1,jjm+1, & |
---|
260 | 0,zjulian,dtime,nhoridcs,nidcs) |
---|
261 | ! no vertical axis |
---|
262 | DO jf=1,maxrecv |
---|
263 | IF (inforecv(i)%action) THEN |
---|
264 | CALL histdef(nidcs,inforecv(i)%name ,inforecv(i)%name , & |
---|
265 | "-",iim, jjm+1, nhoridcs, 1, 1, 1, -99, 32, "inst", dtime,dtime) |
---|
266 | ENDIF |
---|
267 | END DO |
---|
268 | CALL histend(nidcs) |
---|
269 | CALL histsync(nidcs) |
---|
270 | |
---|
271 | ENDIF ! is_sequential |
---|
272 | |
---|
273 | |
---|
274 | !************************************************************************************* |
---|
275 | ! compatibility test |
---|
276 | ! |
---|
277 | !************************************************************************************* |
---|
278 | IF (carbon_cycle_cpl .AND. version_ocean=='opa8') THEN |
---|
279 | abort_message='carbon_cycle_cpl does not work with opa8' |
---|
280 | CALL abort_gcm(modname,abort_message,1) |
---|
281 | END IF |
---|
282 | |
---|
283 | END SUBROUTINE cpl_init |
---|
284 | |
---|
285 | ! |
---|
286 | !************************************************************************************* |
---|
287 | ! |
---|
288 | |
---|
289 | SUBROUTINE cpl_receive_frac(itime, dtime, pctsrf, is_modified) |
---|
290 | ! This subroutine receives from coupler for both ocean and seaice |
---|
291 | ! 4 fields : read_sst, read_sic, read_sit and read_alb_sic. |
---|
292 | ! The new sea-ice-land-landice fraction is returned. The others fields |
---|
293 | ! are stored in this module. |
---|
294 | USE surface_data |
---|
295 | USE phys_state_var_mod, ONLY : rlon, rlat |
---|
296 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl |
---|
297 | |
---|
298 | INCLUDE "indicesol.h" |
---|
299 | INCLUDE "temps.h" |
---|
300 | INCLUDE "iniprint.h" |
---|
301 | INCLUDE "YOMCST.h" |
---|
302 | INCLUDE "dimensions.h" |
---|
303 | |
---|
304 | ! Arguments |
---|
305 | !************************************************************************************ |
---|
306 | INTEGER, INTENT(IN) :: itime |
---|
307 | REAL, INTENT(IN) :: dtime |
---|
308 | REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: pctsrf |
---|
309 | LOGICAL, INTENT(OUT) :: is_modified |
---|
310 | |
---|
311 | ! Local variables |
---|
312 | !************************************************************************************ |
---|
313 | INTEGER :: j, i, time_sec |
---|
314 | INTEGER :: itau_w |
---|
315 | INTEGER, DIMENSION(iim*(jjm+1)) :: ndexcs |
---|
316 | CHARACTER(len = 20) :: modname = 'cpl_receive_frac' |
---|
317 | CHARACTER(len = 80) :: abort_message |
---|
318 | REAL, DIMENSION(klon) :: read_sic1D |
---|
319 | REAL, DIMENSION(iim,jj_nb,maxrecv) :: tab_read_flds |
---|
320 | REAL, DIMENSION(klon,nbsrf) :: pctsrf_old |
---|
321 | REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi |
---|
322 | REAL, DIMENSION(iim, jj_nb) :: tmp_lon, tmp_lat |
---|
323 | REAL, DIMENSION(iim, jj_nb) :: tmp_r0 |
---|
324 | |
---|
325 | !************************************************************************************* |
---|
326 | ! Start calculation |
---|
327 | ! Get fields from coupler |
---|
328 | ! |
---|
329 | !************************************************************************************* |
---|
330 | |
---|
331 | is_modified=.FALSE. |
---|
332 | |
---|
333 | ! Check if right moment to receive from coupler |
---|
334 | IF (MOD(itime, nexca) == 1) THEN |
---|
335 | is_modified=.TRUE. |
---|
336 | |
---|
337 | time_sec=(itime-1)*dtime |
---|
338 | #ifdef CPP_COUPLE |
---|
339 | !$OMP MASTER |
---|
340 | CALL fromcpl(time_sec, tab_read_flds) |
---|
341 | !$OMP END MASTER |
---|
342 | #endif |
---|
343 | |
---|
344 | ! NetCDF output of received fields |
---|
345 | IF (is_sequential) THEN |
---|
346 | ndexcs(:) = 0 |
---|
347 | itau_w = itau_phy + itime + start_time * day_step / iphysiq |
---|
348 | DO i = 1, maxrecv |
---|
349 | IF (inforecv(i)%action) THEN |
---|
350 | CALL histwrite(nidcs,inforecv(i)%name,itau_w,tab_read_flds(:,:,i),iim*(jjm+1),ndexcs) |
---|
351 | ENDIF |
---|
352 | END DO |
---|
353 | ENDIF |
---|
354 | |
---|
355 | |
---|
356 | ! Save each field in a 2D array. |
---|
357 | !$OMP MASTER |
---|
358 | read_sst(:,:) = tab_read_flds(:,:,idr_sisutw) ! Sea surface temperature |
---|
359 | read_sic(:,:) = tab_read_flds(:,:,idr_icecov) ! Sea ice concentration |
---|
360 | read_alb_sic(:,:) = tab_read_flds(:,:,idr_icealw) ! Albedo at sea ice |
---|
361 | read_sit(:,:) = tab_read_flds(:,:,idr_icetem) ! Sea ice temperature |
---|
362 | !$OMP END MASTER |
---|
363 | |
---|
364 | IF (cpl_current) THEN |
---|
365 | |
---|
366 | ! Transform the longitudes and latitudes on 2D arrays |
---|
367 | CALL gather_omp(rlon,rlon_mpi) |
---|
368 | CALL gather_omp(rlat,rlat_mpi) |
---|
369 | !$OMP MASTER |
---|
370 | CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon) |
---|
371 | CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat) |
---|
372 | |
---|
373 | ! Transform the currents from cartesian to spheric coordinates |
---|
374 | ! tmp_r0 should be zero |
---|
375 | CALL geo2atm(iim, jj_nb, tab_read_flds(:,:,idr_curenx), & |
---|
376 | tab_read_flds(:,:,idr_cureny), tab_read_flds(:,:,idr_curenz), & |
---|
377 | tmp_lon, tmp_lat, & |
---|
378 | read_u0(:,:), read_v0(:,:), tmp_r0(:,:)) |
---|
379 | !$OMP END MASTER |
---|
380 | |
---|
381 | ELSE |
---|
382 | read_u0(:,:) = 0. |
---|
383 | read_v0(:,:) = 0. |
---|
384 | ENDIF |
---|
385 | |
---|
386 | IF (carbon_cycle_cpl) THEN |
---|
387 | !$OMP MASTER |
---|
388 | read_co2(:,:) = tab_read_flds(:,:,idr_oceco2) ! CO2 flux |
---|
389 | !$OMP END MASTER |
---|
390 | ENDIF |
---|
391 | |
---|
392 | !************************************************************************************* |
---|
393 | ! Transform seaice fraction (read_sic : ocean-seaice mask) into global |
---|
394 | ! fraction (pctsrf : ocean-seaice-land-landice mask) |
---|
395 | ! |
---|
396 | !************************************************************************************* |
---|
397 | CALL cpl2gath(read_sic, read_sic1D, klon, unity) |
---|
398 | |
---|
399 | pctsrf_old(:,:) = pctsrf(:,:) |
---|
400 | DO i = 1, klon |
---|
401 | ! treatment only of points with ocean and/or seaice |
---|
402 | ! old land-ocean mask can not be changed |
---|
403 | IF (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic) > 0.) THEN |
---|
404 | pctsrf(i,is_sic) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) & |
---|
405 | * read_sic1D(i) |
---|
406 | pctsrf(i,is_oce) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) & |
---|
407 | - pctsrf(i,is_sic) |
---|
408 | ENDIF |
---|
409 | ENDDO |
---|
410 | |
---|
411 | END IF ! if time to receive |
---|
412 | |
---|
413 | END SUBROUTINE cpl_receive_frac |
---|
414 | |
---|
415 | ! |
---|
416 | !************************************************************************************* |
---|
417 | ! |
---|
418 | |
---|
419 | SUBROUTINE cpl_receive_ocean_fields(knon, knindex, tsurf_new, u0_new, v0_new) |
---|
420 | ! |
---|
421 | ! This routine returns the field for the ocean that has been read from the coupler |
---|
422 | ! (done earlier with cpl_receive_frac). The field is the temperature. |
---|
423 | ! The temperature is transformed into 1D array with valid points from index 1 to knon. |
---|
424 | ! |
---|
425 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day |
---|
426 | INCLUDE "indicesol.h" |
---|
427 | |
---|
428 | ! Input arguments |
---|
429 | !************************************************************************************* |
---|
430 | INTEGER, INTENT(IN) :: knon |
---|
431 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
432 | |
---|
433 | ! Output arguments |
---|
434 | !************************************************************************************* |
---|
435 | REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new |
---|
436 | REAL, DIMENSION(klon), INTENT(OUT) :: u0_new |
---|
437 | REAL, DIMENSION(klon), INTENT(OUT) :: v0_new |
---|
438 | |
---|
439 | ! Local variables |
---|
440 | !************************************************************************************* |
---|
441 | INTEGER :: i |
---|
442 | INTEGER, DIMENSION(klon) :: index |
---|
443 | REAL, DIMENSION(klon) :: sic_new |
---|
444 | |
---|
445 | !************************************************************************************* |
---|
446 | ! Transform read_sst into compressed 1D variable tsurf_new |
---|
447 | ! |
---|
448 | !************************************************************************************* |
---|
449 | CALL cpl2gath(read_sst, tsurf_new, knon, knindex) |
---|
450 | CALL cpl2gath(read_sic, sic_new, knon, knindex) |
---|
451 | CALL cpl2gath(read_u0, u0_new, knon, knindex) |
---|
452 | CALL cpl2gath(read_v0, v0_new, knon, knindex) |
---|
453 | |
---|
454 | !************************************************************************************* |
---|
455 | ! Transform read_co2 into uncompressed 1D variable fco2_ocn_day added directly in |
---|
456 | ! the module carbon_cycle_mod |
---|
457 | ! |
---|
458 | !************************************************************************************* |
---|
459 | IF (carbon_cycle_cpl) THEN |
---|
460 | DO i=1,klon |
---|
461 | index(i)=i |
---|
462 | END DO |
---|
463 | CALL cpl2gath(read_co2, fco2_ocn_day, klon, index) |
---|
464 | END IF |
---|
465 | |
---|
466 | !************************************************************************************* |
---|
467 | ! The fields received from the coupler have to be weighted with the fraction of ocean |
---|
468 | ! in relation to the total sea-ice+ocean |
---|
469 | ! |
---|
470 | !************************************************************************************* |
---|
471 | DO i=1, knon |
---|
472 | tsurf_new(i) = tsurf_new(i)/(1. - sic_new(i)) |
---|
473 | END DO |
---|
474 | |
---|
475 | END SUBROUTINE cpl_receive_ocean_fields |
---|
476 | |
---|
477 | ! |
---|
478 | !************************************************************************************* |
---|
479 | ! |
---|
480 | |
---|
481 | SUBROUTINE cpl_receive_seaice_fields(knon, knindex, & |
---|
482 | tsurf_new, alb_new, u0_new, v0_new) |
---|
483 | ! |
---|
484 | ! This routine returns the fields for the seaice that have been read from the coupler |
---|
485 | ! (done earlier with cpl_receive_frac). These fields are the temperature and |
---|
486 | ! albedo at sea ice surface and fraction of sea ice. |
---|
487 | ! The fields are transformed into 1D arrays with valid points from index 1 to knon. |
---|
488 | ! |
---|
489 | |
---|
490 | ! Input arguments |
---|
491 | !************************************************************************************* |
---|
492 | INTEGER, INTENT(IN) :: knon |
---|
493 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
494 | |
---|
495 | ! Output arguments |
---|
496 | !************************************************************************************* |
---|
497 | REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new |
---|
498 | REAL, DIMENSION(klon), INTENT(OUT) :: alb_new |
---|
499 | REAL, DIMENSION(klon), INTENT(OUT) :: u0_new |
---|
500 | REAL, DIMENSION(klon), INTENT(OUT) :: v0_new |
---|
501 | |
---|
502 | ! Local variables |
---|
503 | !************************************************************************************* |
---|
504 | INTEGER :: i |
---|
505 | REAL, DIMENSION(klon) :: sic_new |
---|
506 | |
---|
507 | !************************************************************************************* |
---|
508 | ! Transform fields read from coupler from 2D into compressed 1D variables |
---|
509 | ! |
---|
510 | !************************************************************************************* |
---|
511 | CALL cpl2gath(read_sit, tsurf_new, knon, knindex) |
---|
512 | CALL cpl2gath(read_alb_sic, alb_new, knon, knindex) |
---|
513 | CALL cpl2gath(read_sic, sic_new, knon, knindex) |
---|
514 | CALL cpl2gath(read_u0, u0_new, knon, knindex) |
---|
515 | CALL cpl2gath(read_v0, v0_new, knon, knindex) |
---|
516 | |
---|
517 | !************************************************************************************* |
---|
518 | ! The fields received from the coupler have to be weighted with the sea-ice |
---|
519 | ! concentration (in relation to the total sea-ice + ocean). |
---|
520 | ! |
---|
521 | !************************************************************************************* |
---|
522 | DO i= 1, knon |
---|
523 | tsurf_new(i) = tsurf_new(i) / sic_new(i) |
---|
524 | alb_new(i) = alb_new(i) / sic_new(i) |
---|
525 | END DO |
---|
526 | |
---|
527 | END SUBROUTINE cpl_receive_seaice_fields |
---|
528 | |
---|
529 | ! |
---|
530 | !************************************************************************************* |
---|
531 | ! |
---|
532 | |
---|
533 | SUBROUTINE cpl_send_ocean_fields(itime, knon, knindex, & |
---|
534 | swdown, lwdown, fluxlat, fluxsens, & |
---|
535 | precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy, windsp) |
---|
536 | ! |
---|
537 | ! This subroutine cumulates some fields for each time-step during a coupling |
---|
538 | ! period. At last time-step in a coupling period the fields are transformed to the |
---|
539 | ! grid accepted by the coupler. No sending to the coupler will be done from here |
---|
540 | ! (it is done in cpl_send_seaice_fields). |
---|
541 | ! |
---|
542 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, co2_send |
---|
543 | INCLUDE "indicesol.h" |
---|
544 | INCLUDE "dimensions.h" |
---|
545 | |
---|
546 | ! Input arguments |
---|
547 | !************************************************************************************* |
---|
548 | INTEGER, INTENT(IN) :: itime |
---|
549 | INTEGER, INTENT(IN) :: knon |
---|
550 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
551 | REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown |
---|
552 | REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens |
---|
553 | REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow |
---|
554 | REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder, albsol |
---|
555 | REAL, DIMENSION(klon), INTENT(IN) :: taux, tauy, windsp |
---|
556 | |
---|
557 | ! Local variables |
---|
558 | !************************************************************************************* |
---|
559 | INTEGER :: cpl_index, ig |
---|
560 | INTEGER :: error, sum_error |
---|
561 | CHARACTER(len = 25) :: modname = 'cpl_send_ocean_fields' |
---|
562 | CHARACTER(len = 80) :: abort_message |
---|
563 | |
---|
564 | !************************************************************************************* |
---|
565 | ! Start calculation |
---|
566 | ! The ocean points are saved with second array index=1 |
---|
567 | ! |
---|
568 | !************************************************************************************* |
---|
569 | cpl_index = 1 |
---|
570 | |
---|
571 | !************************************************************************************* |
---|
572 | ! Reset fields to zero in the beginning of a new coupling period |
---|
573 | ! |
---|
574 | !************************************************************************************* |
---|
575 | IF (MOD(itime, nexca) == 1) THEN |
---|
576 | cpl_sols(1:knon,cpl_index) = 0.0 |
---|
577 | cpl_nsol(1:knon,cpl_index) = 0.0 |
---|
578 | cpl_rain(1:knon,cpl_index) = 0.0 |
---|
579 | cpl_snow(1:knon,cpl_index) = 0.0 |
---|
580 | cpl_evap(1:knon,cpl_index) = 0.0 |
---|
581 | cpl_tsol(1:knon,cpl_index) = 0.0 |
---|
582 | cpl_fder(1:knon,cpl_index) = 0.0 |
---|
583 | cpl_albe(1:knon,cpl_index) = 0.0 |
---|
584 | cpl_taux(1:knon,cpl_index) = 0.0 |
---|
585 | cpl_tauy(1:knon,cpl_index) = 0.0 |
---|
586 | cpl_windsp(1:knon,cpl_index) = 0.0 |
---|
587 | cpl_taumod(1:knon,cpl_index) = 0.0 |
---|
588 | IF (carbon_cycle_cpl) cpl_atm_co2(1:knon,cpl_index) = 0.0 |
---|
589 | ENDIF |
---|
590 | |
---|
591 | !************************************************************************************* |
---|
592 | ! Cumulate at each time-step |
---|
593 | ! |
---|
594 | !************************************************************************************* |
---|
595 | DO ig = 1, knon |
---|
596 | cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + & |
---|
597 | swdown(ig) / REAL(nexca) |
---|
598 | cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + & |
---|
599 | (lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca) |
---|
600 | cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + & |
---|
601 | precip_rain(ig) / REAL(nexca) |
---|
602 | cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + & |
---|
603 | precip_snow(ig) / REAL(nexca) |
---|
604 | cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + & |
---|
605 | evap(ig) / REAL(nexca) |
---|
606 | cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + & |
---|
607 | tsurf(ig) / REAL(nexca) |
---|
608 | cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + & |
---|
609 | fder(ig) / REAL(nexca) |
---|
610 | cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + & |
---|
611 | albsol(ig) / REAL(nexca) |
---|
612 | cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + & |
---|
613 | taux(ig) / REAL(nexca) |
---|
614 | cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + & |
---|
615 | tauy(ig) / REAL(nexca) |
---|
616 | cpl_windsp(ig,cpl_index) = cpl_windsp(ig,cpl_index) + & |
---|
617 | windsp(ig) / REAL(nexca) |
---|
618 | cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + & |
---|
619 | SQRT ( taux(ig)*taux(ig)+tauy(ig)*tauy(ig) ) / REAL (nexca) |
---|
620 | |
---|
621 | IF (carbon_cycle_cpl) THEN |
---|
622 | cpl_atm_co2(ig,cpl_index) = cpl_atm_co2(ig,cpl_index) + & |
---|
623 | co2_send(knindex(ig))/ REAL(nexca) |
---|
624 | END IF |
---|
625 | ENDDO |
---|
626 | |
---|
627 | !************************************************************************************* |
---|
628 | ! If the time-step corresponds to the end of coupling period the |
---|
629 | ! fields are transformed to the 2D grid. |
---|
630 | ! No sending to the coupler (it is done from cpl_send_seaice_fields). |
---|
631 | ! |
---|
632 | !************************************************************************************* |
---|
633 | IF (MOD(itime, nexca) == 0) THEN |
---|
634 | |
---|
635 | IF (.NOT. ALLOCATED(cpl_sols2D)) THEN |
---|
636 | sum_error = 0 |
---|
637 | ALLOCATE(cpl_sols2D(iim,jj_nb,2), stat=error) |
---|
638 | sum_error = sum_error + error |
---|
639 | ALLOCATE(cpl_nsol2D(iim,jj_nb,2), stat=error) |
---|
640 | sum_error = sum_error + error |
---|
641 | ALLOCATE(cpl_rain2D(iim,jj_nb,2), stat=error) |
---|
642 | sum_error = sum_error + error |
---|
643 | ALLOCATE(cpl_snow2D(iim,jj_nb,2), stat=error) |
---|
644 | sum_error = sum_error + error |
---|
645 | ALLOCATE(cpl_evap2D(iim,jj_nb,2), stat=error) |
---|
646 | sum_error = sum_error + error |
---|
647 | ALLOCATE(cpl_tsol2D(iim,jj_nb,2), stat=error) |
---|
648 | sum_error = sum_error + error |
---|
649 | ALLOCATE(cpl_fder2D(iim,jj_nb,2), stat=error) |
---|
650 | sum_error = sum_error + error |
---|
651 | ALLOCATE(cpl_albe2D(iim,jj_nb,2), stat=error) |
---|
652 | sum_error = sum_error + error |
---|
653 | ALLOCATE(cpl_taux2D(iim,jj_nb,2), stat=error) |
---|
654 | sum_error = sum_error + error |
---|
655 | ALLOCATE(cpl_tauy2D(iim,jj_nb,2), stat=error) |
---|
656 | sum_error = sum_error + error |
---|
657 | ALLOCATE(cpl_windsp2D(iim,jj_nb), stat=error) |
---|
658 | sum_error = sum_error + error |
---|
659 | ALLOCATE(cpl_taumod2D(iim,jj_nb,2), stat=error) |
---|
660 | sum_error = sum_error + error |
---|
661 | |
---|
662 | IF (carbon_cycle_cpl) THEN |
---|
663 | ALLOCATE(cpl_atm_co22D(iim,jj_nb), stat=error) |
---|
664 | sum_error = sum_error + error |
---|
665 | END IF |
---|
666 | |
---|
667 | IF (sum_error /= 0) THEN |
---|
668 | abort_message='Pb allocation variables couplees pour l''ecriture' |
---|
669 | CALL abort_gcm(modname,abort_message,1) |
---|
670 | ENDIF |
---|
671 | ENDIF |
---|
672 | |
---|
673 | |
---|
674 | CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), & |
---|
675 | knon, knindex) |
---|
676 | |
---|
677 | CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), & |
---|
678 | knon, knindex) |
---|
679 | |
---|
680 | CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), & |
---|
681 | knon, knindex) |
---|
682 | |
---|
683 | CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), & |
---|
684 | knon, knindex) |
---|
685 | |
---|
686 | CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), & |
---|
687 | knon, knindex) |
---|
688 | |
---|
689 | ! cpl_tsol2D(:,:,:) not used! |
---|
690 | CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), & |
---|
691 | knon, knindex) |
---|
692 | |
---|
693 | ! cpl_fder2D(:,:,1) not used, only cpl_fder(:,:,2)! |
---|
694 | CALL gath2cpl(cpl_fder(:,cpl_index), cpl_fder2D(:,:,cpl_index), & |
---|
695 | knon, knindex) |
---|
696 | |
---|
697 | ! cpl_albe2D(:,:,:) not used! |
---|
698 | CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), & |
---|
699 | knon, knindex) |
---|
700 | |
---|
701 | CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), & |
---|
702 | knon, knindex) |
---|
703 | |
---|
704 | CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), & |
---|
705 | knon, knindex) |
---|
706 | |
---|
707 | CALL gath2cpl(cpl_windsp(:,cpl_index), cpl_windsp2D(:,:), & |
---|
708 | knon, knindex) |
---|
709 | |
---|
710 | CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), & |
---|
711 | knon, knindex) |
---|
712 | |
---|
713 | IF (carbon_cycle_cpl) & |
---|
714 | CALL gath2cpl(cpl_atm_co2(:,cpl_index), cpl_atm_co22D(:,:), knon, knindex) |
---|
715 | ENDIF |
---|
716 | |
---|
717 | END SUBROUTINE cpl_send_ocean_fields |
---|
718 | |
---|
719 | ! |
---|
720 | !************************************************************************************* |
---|
721 | ! |
---|
722 | |
---|
723 | SUBROUTINE cpl_send_seaice_fields(itime, dtime, knon, knindex, & |
---|
724 | pctsrf, lafin, rlon, rlat, & |
---|
725 | swdown, lwdown, fluxlat, fluxsens, & |
---|
726 | precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy) |
---|
727 | ! |
---|
728 | ! This subroutine cumulates some fields for each time-step during a coupling |
---|
729 | ! period. At last time-step in a coupling period the fields are transformed to the |
---|
730 | ! grid accepted by the coupler. All fields for all types of surfaces are sent to |
---|
731 | ! the coupler. |
---|
732 | ! |
---|
733 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl |
---|
734 | INCLUDE "indicesol.h" |
---|
735 | INCLUDE "dimensions.h" |
---|
736 | |
---|
737 | ! Input arguments |
---|
738 | !************************************************************************************* |
---|
739 | INTEGER, INTENT(IN) :: itime |
---|
740 | INTEGER, INTENT(IN) :: knon |
---|
741 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
742 | REAL, INTENT(IN) :: dtime |
---|
743 | REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat |
---|
744 | REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown |
---|
745 | REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens |
---|
746 | REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow |
---|
747 | REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder |
---|
748 | REAL, DIMENSION(klon), INTENT(IN) :: albsol, taux, tauy |
---|
749 | REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf |
---|
750 | LOGICAL, INTENT(IN) :: lafin |
---|
751 | |
---|
752 | ! Local variables |
---|
753 | !************************************************************************************* |
---|
754 | INTEGER :: cpl_index, ig |
---|
755 | INTEGER :: error, sum_error |
---|
756 | CHARACTER(len = 25) :: modname = 'cpl_send_seaice_fields' |
---|
757 | CHARACTER(len = 80) :: abort_message |
---|
758 | REAL, DIMENSION(klon) :: cpl_fder_tmp |
---|
759 | |
---|
760 | !************************************************************************************* |
---|
761 | ! Start calulation |
---|
762 | ! The sea-ice points are saved with second array index=2 |
---|
763 | ! |
---|
764 | !************************************************************************************* |
---|
765 | cpl_index = 2 |
---|
766 | |
---|
767 | !************************************************************************************* |
---|
768 | ! Reset fields to zero in the beginning of a new coupling period |
---|
769 | ! |
---|
770 | !************************************************************************************* |
---|
771 | IF (MOD(itime, nexca) == 1) THEN |
---|
772 | cpl_sols(1:knon,cpl_index) = 0.0 |
---|
773 | cpl_nsol(1:knon,cpl_index) = 0.0 |
---|
774 | cpl_rain(1:knon,cpl_index) = 0.0 |
---|
775 | cpl_snow(1:knon,cpl_index) = 0.0 |
---|
776 | cpl_evap(1:knon,cpl_index) = 0.0 |
---|
777 | cpl_tsol(1:knon,cpl_index) = 0.0 |
---|
778 | cpl_fder(1:knon,cpl_index) = 0.0 |
---|
779 | cpl_albe(1:knon,cpl_index) = 0.0 |
---|
780 | cpl_taux(1:knon,cpl_index) = 0.0 |
---|
781 | cpl_tauy(1:knon,cpl_index) = 0.0 |
---|
782 | cpl_taumod(1:knon,cpl_index) = 0.0 |
---|
783 | ENDIF |
---|
784 | |
---|
785 | !************************************************************************************* |
---|
786 | ! Cumulate at each time-step |
---|
787 | ! |
---|
788 | !************************************************************************************* |
---|
789 | DO ig = 1, knon |
---|
790 | cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + & |
---|
791 | swdown(ig) / REAL(nexca) |
---|
792 | cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + & |
---|
793 | (lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca) |
---|
794 | cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + & |
---|
795 | precip_rain(ig) / REAL(nexca) |
---|
796 | cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + & |
---|
797 | precip_snow(ig) / REAL(nexca) |
---|
798 | cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + & |
---|
799 | evap(ig) / REAL(nexca) |
---|
800 | cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + & |
---|
801 | tsurf(ig) / REAL(nexca) |
---|
802 | cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + & |
---|
803 | fder(ig) / REAL(nexca) |
---|
804 | cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + & |
---|
805 | albsol(ig) / REAL(nexca) |
---|
806 | cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + & |
---|
807 | taux(ig) / REAL(nexca) |
---|
808 | cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + & |
---|
809 | tauy(ig) / REAL(nexca) |
---|
810 | cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + & |
---|
811 | SQRT ( taux(ig)*taux(ig)+tauy(ig)*tauy(ig) ) / REAL(nexca) |
---|
812 | ENDDO |
---|
813 | |
---|
814 | !************************************************************************************* |
---|
815 | ! If the time-step corresponds to the end of coupling period the |
---|
816 | ! fields are transformed to the 2D grid and all fields are sent to coupler. |
---|
817 | ! |
---|
818 | !************************************************************************************* |
---|
819 | IF (MOD(itime, nexca) == 0) THEN |
---|
820 | IF (.NOT. ALLOCATED(cpl_sols2D)) THEN |
---|
821 | sum_error = 0 |
---|
822 | ALLOCATE(cpl_sols2D(iim,jj_nb,2), stat=error) |
---|
823 | sum_error = sum_error + error |
---|
824 | ALLOCATE(cpl_nsol2D(iim,jj_nb,2), stat=error) |
---|
825 | sum_error = sum_error + error |
---|
826 | ALLOCATE(cpl_rain2D(iim,jj_nb,2), stat=error) |
---|
827 | sum_error = sum_error + error |
---|
828 | ALLOCATE(cpl_snow2D(iim,jj_nb,2), stat=error) |
---|
829 | sum_error = sum_error + error |
---|
830 | ALLOCATE(cpl_evap2D(iim,jj_nb,2), stat=error) |
---|
831 | sum_error = sum_error + error |
---|
832 | ALLOCATE(cpl_tsol2D(iim,jj_nb,2), stat=error) |
---|
833 | sum_error = sum_error + error |
---|
834 | ALLOCATE(cpl_fder2D(iim,jj_nb,2), stat=error) |
---|
835 | sum_error = sum_error + error |
---|
836 | ALLOCATE(cpl_albe2D(iim,jj_nb,2), stat=error) |
---|
837 | sum_error = sum_error + error |
---|
838 | ALLOCATE(cpl_taux2D(iim,jj_nb,2), stat=error) |
---|
839 | sum_error = sum_error + error |
---|
840 | ALLOCATE(cpl_tauy2D(iim,jj_nb,2), stat=error) |
---|
841 | sum_error = sum_error + error |
---|
842 | ALLOCATE(cpl_windsp2D(iim,jj_nb), stat=error) |
---|
843 | sum_error = sum_error + error |
---|
844 | ALLOCATE(cpl_taumod2D(iim,jj_nb,2), stat=error) |
---|
845 | sum_error = sum_error + error |
---|
846 | |
---|
847 | IF (carbon_cycle_cpl) THEN |
---|
848 | ALLOCATE(cpl_atm_co22D(iim,jj_nb), stat=error) |
---|
849 | sum_error = sum_error + error |
---|
850 | END IF |
---|
851 | |
---|
852 | IF (sum_error /= 0) THEN |
---|
853 | abort_message='Pb allocation variables couplees pour l''ecriture' |
---|
854 | CALL abort_gcm(modname,abort_message,1) |
---|
855 | ENDIF |
---|
856 | ENDIF |
---|
857 | |
---|
858 | CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), & |
---|
859 | knon, knindex) |
---|
860 | |
---|
861 | CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), & |
---|
862 | knon, knindex) |
---|
863 | |
---|
864 | CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), & |
---|
865 | knon, knindex) |
---|
866 | |
---|
867 | CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), & |
---|
868 | knon, knindex) |
---|
869 | |
---|
870 | CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), & |
---|
871 | knon, knindex) |
---|
872 | |
---|
873 | ! cpl_tsol2D(:,:,:) not used! |
---|
874 | CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), & |
---|
875 | knon, knindex) |
---|
876 | |
---|
877 | ! Set default value and decompress before gath2cpl |
---|
878 | cpl_fder_tmp(:) = -20. |
---|
879 | DO ig = 1, knon |
---|
880 | cpl_fder_tmp(knindex(ig))=cpl_fder(ig,cpl_index) |
---|
881 | END DO |
---|
882 | CALL gath2cpl(cpl_fder_tmp(:), cpl_fder2D(:,:,cpl_index), & |
---|
883 | klon, unity) |
---|
884 | |
---|
885 | ! cpl_albe2D(:,:,:) not used! |
---|
886 | CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), & |
---|
887 | knon, knindex) |
---|
888 | |
---|
889 | CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), & |
---|
890 | knon, knindex) |
---|
891 | |
---|
892 | CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), & |
---|
893 | knon, knindex) |
---|
894 | |
---|
895 | CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), & |
---|
896 | knon, knindex) |
---|
897 | |
---|
898 | ! Send all fields |
---|
899 | CALL cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat) |
---|
900 | ENDIF |
---|
901 | |
---|
902 | END SUBROUTINE cpl_send_seaice_fields |
---|
903 | |
---|
904 | ! |
---|
905 | !************************************************************************************* |
---|
906 | ! |
---|
907 | |
---|
908 | SUBROUTINE cpl_send_land_fields(itime, knon, knindex, rriv_in, rcoa_in) |
---|
909 | ! |
---|
910 | ! This subroutine cumulates some fields for each time-step during a coupling |
---|
911 | ! period. At last time-step in a coupling period the fields are transformed to the |
---|
912 | ! grid accepted by the coupler. No sending to the coupler will be done from here |
---|
913 | ! (it is done in cpl_send_seaice_fields). |
---|
914 | ! |
---|
915 | INCLUDE "dimensions.h" |
---|
916 | |
---|
917 | ! Input arguments |
---|
918 | !************************************************************************************* |
---|
919 | INTEGER, INTENT(IN) :: itime |
---|
920 | INTEGER, INTENT(IN) :: knon |
---|
921 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
922 | REAL, DIMENSION(klon), INTENT(IN) :: rriv_in |
---|
923 | REAL, DIMENSION(klon), INTENT(IN) :: rcoa_in |
---|
924 | |
---|
925 | ! Local variables |
---|
926 | !************************************************************************************* |
---|
927 | REAL, DIMENSION(iim,jj_nb) :: rriv2D |
---|
928 | REAL, DIMENSION(iim,jj_nb) :: rcoa2D |
---|
929 | |
---|
930 | !************************************************************************************* |
---|
931 | ! Rearrange fields in 2D variables |
---|
932 | ! First initialize to zero to avoid unvalid points causing problems |
---|
933 | ! |
---|
934 | !************************************************************************************* |
---|
935 | !$OMP MASTER |
---|
936 | rriv2D(:,:) = 0.0 |
---|
937 | rcoa2D(:,:) = 0.0 |
---|
938 | !$OMP END MASTER |
---|
939 | CALL gath2cpl(rriv_in, rriv2D, knon, knindex) |
---|
940 | CALL gath2cpl(rcoa_in, rcoa2D, knon, knindex) |
---|
941 | |
---|
942 | !************************************************************************************* |
---|
943 | ! Reset cumulated fields to zero in the beginning of a new coupling period |
---|
944 | ! |
---|
945 | !************************************************************************************* |
---|
946 | IF (MOD(itime, nexca) == 1) THEN |
---|
947 | !$OMP MASTER |
---|
948 | cpl_rriv2D(:,:) = 0.0 |
---|
949 | cpl_rcoa2D(:,:) = 0.0 |
---|
950 | !$OMP END MASTER |
---|
951 | ENDIF |
---|
952 | |
---|
953 | !************************************************************************************* |
---|
954 | ! Cumulate : Following fields should be cumulated at each time-step |
---|
955 | ! |
---|
956 | !************************************************************************************* |
---|
957 | !$OMP MASTER |
---|
958 | cpl_rriv2D(:,:) = cpl_rriv2D(:,:) + rriv2D(:,:) / REAL(nexca) |
---|
959 | cpl_rcoa2D(:,:) = cpl_rcoa2D(:,:) + rcoa2D(:,:) / REAL(nexca) |
---|
960 | !$OMP END MASTER |
---|
961 | |
---|
962 | END SUBROUTINE cpl_send_land_fields |
---|
963 | |
---|
964 | ! |
---|
965 | !************************************************************************************* |
---|
966 | ! |
---|
967 | |
---|
968 | SUBROUTINE cpl_send_landice_fields(itime, knon, knindex, rlic_in) |
---|
969 | ! This subroutine cumulates the field for melting ice for each time-step |
---|
970 | ! during a coupling period. This routine will not send to coupler. Sending |
---|
971 | ! will be done in cpl_send_seaice_fields. |
---|
972 | ! |
---|
973 | |
---|
974 | INCLUDE "dimensions.h" |
---|
975 | |
---|
976 | ! Input varibales |
---|
977 | !************************************************************************************* |
---|
978 | INTEGER, INTENT(IN) :: itime |
---|
979 | INTEGER, INTENT(IN) :: knon |
---|
980 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
981 | REAL, DIMENSION(klon), INTENT(IN) :: rlic_in |
---|
982 | |
---|
983 | ! Local varibales |
---|
984 | !************************************************************************************* |
---|
985 | REAL, DIMENSION(iim,jj_nb) :: rlic2D |
---|
986 | |
---|
987 | !************************************************************************************* |
---|
988 | ! Rearrange field in a 2D variable |
---|
989 | ! First initialize to zero to avoid unvalid points causing problems |
---|
990 | ! |
---|
991 | !************************************************************************************* |
---|
992 | !$OMP MASTER |
---|
993 | rlic2D(:,:) = 0.0 |
---|
994 | !$OMP END MASTER |
---|
995 | CALL gath2cpl(rlic_in, rlic2D, knon, knindex) |
---|
996 | |
---|
997 | !************************************************************************************* |
---|
998 | ! Reset field to zero in the beginning of a new coupling period |
---|
999 | ! |
---|
1000 | !************************************************************************************* |
---|
1001 | IF (MOD(itime, nexca) == 1) THEN |
---|
1002 | !$OMP MASTER |
---|
1003 | cpl_rlic2D(:,:) = 0.0 |
---|
1004 | !$OMP END MASTER |
---|
1005 | ENDIF |
---|
1006 | |
---|
1007 | !************************************************************************************* |
---|
1008 | ! Cumulate : Melting ice should be cumulated at each time-step |
---|
1009 | ! |
---|
1010 | !************************************************************************************* |
---|
1011 | !$OMP MASTER |
---|
1012 | cpl_rlic2D(:,:) = cpl_rlic2D(:,:) + rlic2D(:,:) / REAL(nexca) |
---|
1013 | !$OMP END MASTER |
---|
1014 | |
---|
1015 | END SUBROUTINE cpl_send_landice_fields |
---|
1016 | |
---|
1017 | ! |
---|
1018 | !************************************************************************************* |
---|
1019 | ! |
---|
1020 | |
---|
1021 | SUBROUTINE cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat) |
---|
1022 | ! This routine will send fields for all different surfaces to the coupler. |
---|
1023 | ! This subroutine should be executed after calculations by the last surface(sea-ice), |
---|
1024 | ! all calculations at the different surfaces have to be done before. |
---|
1025 | ! |
---|
1026 | USE surface_data |
---|
1027 | USE carbon_cycle_mod, ONLY : carbon_cycle_cpl |
---|
1028 | ! Some includes |
---|
1029 | !************************************************************************************* |
---|
1030 | INCLUDE "indicesol.h" |
---|
1031 | INCLUDE "temps.h" |
---|
1032 | INCLUDE "dimensions.h" |
---|
1033 | |
---|
1034 | ! Input arguments |
---|
1035 | !************************************************************************************* |
---|
1036 | INTEGER, INTENT(IN) :: itime |
---|
1037 | REAL, INTENT(IN) :: dtime |
---|
1038 | REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat |
---|
1039 | REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf |
---|
1040 | LOGICAL, INTENT(IN) :: lafin |
---|
1041 | |
---|
1042 | ! Local variables |
---|
1043 | !************************************************************************************* |
---|
1044 | INTEGER :: error, sum_error, j |
---|
1045 | INTEGER :: itau_w |
---|
1046 | INTEGER :: time_sec |
---|
1047 | INTEGER, DIMENSION(iim*(jjm+1)) :: ndexct |
---|
1048 | REAL :: Up, Down |
---|
1049 | REAL, DIMENSION(iim, jj_nb) :: tmp_lon, tmp_lat |
---|
1050 | REAL, DIMENSION(iim, jj_nb, 4) :: pctsrf2D |
---|
1051 | REAL, DIMENSION(iim, jj_nb) :: deno |
---|
1052 | CHARACTER(len = 20) :: modname = 'cpl_send_all' |
---|
1053 | CHARACTER(len = 80) :: abort_message |
---|
1054 | |
---|
1055 | ! Variables with fields to coupler |
---|
1056 | REAL, DIMENSION(iim, jj_nb) :: tmp_taux |
---|
1057 | REAL, DIMENSION(iim, jj_nb) :: tmp_tauy |
---|
1058 | REAL, DIMENSION(iim, jj_nb) :: tmp_calv |
---|
1059 | ! Table with all fields to send to coupler |
---|
1060 | REAL, DIMENSION(iim, jj_nb, maxsend) :: tab_flds |
---|
1061 | REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi |
---|
1062 | |
---|
1063 | #ifdef CPP_MPI |
---|
1064 | INCLUDE 'mpif.h' |
---|
1065 | INTEGER, DIMENSION(MPI_STATUS_SIZE) :: status |
---|
1066 | #endif |
---|
1067 | |
---|
1068 | ! End definitions |
---|
1069 | !************************************************************************************* |
---|
1070 | |
---|
1071 | |
---|
1072 | |
---|
1073 | !************************************************************************************* |
---|
1074 | ! All fields are stored in a table tab_flds(:,:,:) |
---|
1075 | ! First store the fields which are already on the right format |
---|
1076 | ! |
---|
1077 | !************************************************************************************* |
---|
1078 | !$OMP MASTER |
---|
1079 | tab_flds(:,:,ids_windsp) = cpl_windsp2D(:,:) |
---|
1080 | tab_flds(:,:,ids_shfice) = cpl_sols2D(:,:,2) |
---|
1081 | tab_flds(:,:,ids_nsfice) = cpl_nsol2D(:,:,2) |
---|
1082 | tab_flds(:,:,ids_dflxdt) = cpl_fder2D(:,:,2) |
---|
1083 | |
---|
1084 | IF (version_ocean=='nemo') THEN |
---|
1085 | tab_flds(:,:,ids_liqrun) = cpl_rriv2D(:,:) + cpl_rcoa2D(:,:) |
---|
1086 | IF (carbon_cycle_cpl) tab_flds(:,:,ids_atmco2)=cpl_atm_co22D(:,:) |
---|
1087 | ELSE IF (version_ocean=='opa8') THEN |
---|
1088 | tab_flds(:,:,ids_shfoce) = cpl_sols2D(:,:,1) |
---|
1089 | tab_flds(:,:,ids_nsfoce) = cpl_nsol2D(:,:,1) |
---|
1090 | tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2) |
---|
1091 | tab_flds(:,:,ids_ocevap) = cpl_evap2D(:,:,1) |
---|
1092 | tab_flds(:,:,ids_runcoa) = cpl_rcoa2D(:,:) |
---|
1093 | tab_flds(:,:,ids_rivflu) = cpl_rriv2D(:,:) |
---|
1094 | END IF |
---|
1095 | |
---|
1096 | !************************************************************************************* |
---|
1097 | ! Transform the fraction of sub-surfaces from 1D to 2D array |
---|
1098 | ! |
---|
1099 | !************************************************************************************* |
---|
1100 | pctsrf2D(:,:,:) = 0. |
---|
1101 | !$OMP END MASTER |
---|
1102 | CALL gath2cpl(pctsrf(:,is_oce), pctsrf2D(:,:,is_oce), klon, unity) |
---|
1103 | CALL gath2cpl(pctsrf(:,is_sic), pctsrf2D(:,:,is_sic), klon, unity) |
---|
1104 | CALL gath2cpl(pctsrf(:,is_lic), pctsrf2D(:,:,is_lic), klon, unity) |
---|
1105 | |
---|
1106 | !************************************************************************************* |
---|
1107 | ! Calculate the average calving per latitude |
---|
1108 | ! Store calving in tab_flds(:,:,19) |
---|
1109 | ! |
---|
1110 | !************************************************************************************* |
---|
1111 | IF (is_omp_root) THEN |
---|
1112 | |
---|
1113 | DO j = 1, jj_nb |
---|
1114 | tmp_calv(:,j) = DOT_PRODUCT (cpl_rlic2D(1:iim,j), & |
---|
1115 | pctsrf2D(1:iim,j,is_lic)) / REAL(iim) |
---|
1116 | ENDDO |
---|
1117 | |
---|
1118 | |
---|
1119 | IF (is_parallel) THEN |
---|
1120 | IF (.NOT. is_north_pole) THEN |
---|
1121 | #ifdef CPP_MPI |
---|
1122 | CALL MPI_RECV(Up,1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,status,error) |
---|
1123 | CALL MPI_SEND(tmp_calv(1,1),1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,error) |
---|
1124 | #endif |
---|
1125 | ENDIF |
---|
1126 | |
---|
1127 | IF (.NOT. is_south_pole) THEN |
---|
1128 | #ifdef CPP_MPI |
---|
1129 | CALL MPI_SEND(tmp_calv(1,jj_nb),1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,error) |
---|
1130 | CALL MPI_RECV(down,1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,status,error) |
---|
1131 | #endif |
---|
1132 | ENDIF |
---|
1133 | |
---|
1134 | IF (.NOT. is_north_pole .AND. ii_begin /=1) THEN |
---|
1135 | Up=Up+tmp_calv(iim,1) |
---|
1136 | tmp_calv(:,1)=Up |
---|
1137 | ENDIF |
---|
1138 | |
---|
1139 | IF (.NOT. is_south_pole .AND. ii_end /= iim) THEN |
---|
1140 | Down=Down+tmp_calv(1,jj_nb) |
---|
1141 | tmp_calv(:,jj_nb)=Down |
---|
1142 | ENDIF |
---|
1143 | ENDIF |
---|
1144 | |
---|
1145 | tab_flds(:,:,ids_calvin) = tmp_calv(:,:) |
---|
1146 | |
---|
1147 | !************************************************************************************* |
---|
1148 | ! Calculate total flux for snow, rain and wind with weighted addition using the |
---|
1149 | ! fractions of ocean and seaice. |
---|
1150 | ! |
---|
1151 | !************************************************************************************* |
---|
1152 | ! fraction oce+seaice |
---|
1153 | deno = pctsrf2D(:,:,is_oce) + pctsrf2D(:,:,is_sic) |
---|
1154 | |
---|
1155 | IF (version_ocean=='nemo') THEN |
---|
1156 | tab_flds(:,:,ids_shftot) = 0.0 |
---|
1157 | tab_flds(:,:,ids_nsftot) = 0.0 |
---|
1158 | tab_flds(:,:,ids_totrai) = 0.0 |
---|
1159 | tab_flds(:,:,ids_totsno) = 0.0 |
---|
1160 | tab_flds(:,:,ids_toteva) = 0.0 |
---|
1161 | tab_flds(:,:,ids_taumod) = 0.0 |
---|
1162 | |
---|
1163 | tmp_taux(:,:) = 0.0 |
---|
1164 | tmp_tauy(:,:) = 0.0 |
---|
1165 | ! For all valid grid cells containing some fraction of ocean or sea-ice |
---|
1166 | WHERE ( deno(:,:) /= 0 ) |
---|
1167 | tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1168 | cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1169 | tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1170 | cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1171 | |
---|
1172 | tab_flds(:,:,ids_shftot) = cpl_sols2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1173 | cpl_sols2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1174 | tab_flds(:,:,ids_nsftot) = cpl_nsol2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1175 | cpl_nsol2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1176 | tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1177 | cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1178 | tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1179 | cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1180 | tab_flds(:,:,ids_toteva) = cpl_evap2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1181 | cpl_evap2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1182 | tab_flds(:,:,ids_taumod) = cpl_taumod2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1183 | cpl_taumod2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1184 | |
---|
1185 | ENDWHERE |
---|
1186 | |
---|
1187 | tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2) |
---|
1188 | |
---|
1189 | ELSE IF (version_ocean=='opa8') THEN |
---|
1190 | ! Store fields for rain and snow in tab_flds(:,:,15) and tab_flds(:,:,16) |
---|
1191 | tab_flds(:,:,ids_totrai) = 0.0 |
---|
1192 | tab_flds(:,:,ids_totsno) = 0.0 |
---|
1193 | tmp_taux(:,:) = 0.0 |
---|
1194 | tmp_tauy(:,:) = 0.0 |
---|
1195 | ! For all valid grid cells containing some fraction of ocean or sea-ice |
---|
1196 | WHERE ( deno(:,:) /= 0 ) |
---|
1197 | tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1198 | cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1199 | tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1200 | cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1201 | |
---|
1202 | tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1203 | cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1204 | tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + & |
---|
1205 | cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:) |
---|
1206 | ENDWHERE |
---|
1207 | END IF |
---|
1208 | |
---|
1209 | ENDIF ! is_omp_root |
---|
1210 | |
---|
1211 | !************************************************************************************* |
---|
1212 | ! Transform the wind components from local atmospheric 2D coordinates to geocentric |
---|
1213 | ! 3D coordinates. |
---|
1214 | ! Store the resulting wind components in tab_flds(:,:,1:6) |
---|
1215 | !************************************************************************************* |
---|
1216 | |
---|
1217 | ! Transform the longitudes and latitudes on 2D arrays |
---|
1218 | |
---|
1219 | CALL gather_omp(rlon,rlon_mpi) |
---|
1220 | CALL gather_omp(rlat,rlat_mpi) |
---|
1221 | !$OMP MASTER |
---|
1222 | CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon) |
---|
1223 | CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat) |
---|
1224 | !$OMP END MASTER |
---|
1225 | |
---|
1226 | IF (is_sequential) THEN |
---|
1227 | IF (is_north_pole) tmp_lon(:,1) = tmp_lon(:,2) |
---|
1228 | IF (is_south_pole) tmp_lon(:,jjm+1) = tmp_lon(:,jjm) |
---|
1229 | ENDIF |
---|
1230 | |
---|
1231 | ! NetCDF output of the wind before transformation of coordinate system |
---|
1232 | IF (is_sequential) THEN |
---|
1233 | ndexct(:) = 0 |
---|
1234 | itau_w = itau_phy + itime + start_time * day_step / iphysiq |
---|
1235 | CALL histwrite(nidct,'tauxe',itau_w,tmp_taux,iim*(jjm+1),ndexct) |
---|
1236 | CALL histwrite(nidct,'tauyn',itau_w,tmp_tauy,iim*(jjm+1),ndexct) |
---|
1237 | CALL histwrite(nidct,'tmp_lon',itau_w,tmp_lon,iim*(jjm+1),ndexct) |
---|
1238 | CALL histwrite(nidct,'tmp_lat',itau_w,tmp_lat,iim*(jjm+1),ndexct) |
---|
1239 | ENDIF |
---|
1240 | |
---|
1241 | ! Transform the wind from spherical atmospheric 2D coordinates to geocentric |
---|
1242 | ! cartesian 3D coordinates |
---|
1243 | !$OMP MASTER |
---|
1244 | CALL atm2geo (iim, jj_nb, tmp_taux, tmp_tauy, tmp_lon, tmp_lat, & |
---|
1245 | tab_flds(:,:,ids_tauxxu), tab_flds(:,:,ids_tauyyu), tab_flds(:,:,ids_tauzzu) ) |
---|
1246 | |
---|
1247 | tab_flds(:,:,ids_tauxxv) = tab_flds(:,:,ids_tauxxu) |
---|
1248 | tab_flds(:,:,ids_tauyyv) = tab_flds(:,:,ids_tauyyu) |
---|
1249 | tab_flds(:,:,ids_tauzzv) = tab_flds(:,:,ids_tauzzu) |
---|
1250 | !$OMP END MASTER |
---|
1251 | |
---|
1252 | !************************************************************************************* |
---|
1253 | ! NetCDF output of all fields just before sending to coupler. |
---|
1254 | ! |
---|
1255 | !************************************************************************************* |
---|
1256 | IF (is_sequential) THEN |
---|
1257 | DO j=1,maxsend |
---|
1258 | IF (infosend(j)%action) CALL histwrite(nidct,infosend(j)%name, itau_w, & |
---|
1259 | tab_flds(:,:,j),iim*(jjm+1),ndexct) |
---|
1260 | ENDDO |
---|
1261 | ENDIF |
---|
1262 | !************************************************************************************* |
---|
1263 | ! Send the table of all fields |
---|
1264 | ! |
---|
1265 | !************************************************************************************* |
---|
1266 | time_sec=(itime-1)*dtime |
---|
1267 | #ifdef CPP_COUPLE |
---|
1268 | !$OMP MASTER |
---|
1269 | CALL intocpl(time_sec, lafin, tab_flds(:,:,:)) |
---|
1270 | !$OMP END MASTER |
---|
1271 | #endif |
---|
1272 | |
---|
1273 | !************************************************************************************* |
---|
1274 | ! Finish with some dellocate |
---|
1275 | ! |
---|
1276 | !************************************************************************************* |
---|
1277 | sum_error=0 |
---|
1278 | DEALLOCATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D, cpl_snow2D, stat=error ) |
---|
1279 | sum_error = sum_error + error |
---|
1280 | DEALLOCATE(cpl_evap2D, cpl_tsol2D, cpl_fder2D, cpl_albe2D, stat=error ) |
---|
1281 | sum_error = sum_error + error |
---|
1282 | DEALLOCATE(cpl_taux2D, cpl_tauy2D, cpl_windsp2D, cpl_taumod2D, stat=error ) |
---|
1283 | sum_error = sum_error + error |
---|
1284 | |
---|
1285 | IF (carbon_cycle_cpl) THEN |
---|
1286 | DEALLOCATE(cpl_atm_co22D, stat=error ) |
---|
1287 | sum_error = sum_error + error |
---|
1288 | END IF |
---|
1289 | |
---|
1290 | IF (sum_error /= 0) THEN |
---|
1291 | abort_message='Pb in deallocation of cpl_xxxx2D coupling variables' |
---|
1292 | CALL abort_gcm(modname,abort_message,1) |
---|
1293 | ENDIF |
---|
1294 | |
---|
1295 | END SUBROUTINE cpl_send_all |
---|
1296 | ! |
---|
1297 | !************************************************************************************* |
---|
1298 | ! |
---|
1299 | SUBROUTINE cpl2gath(champ_in, champ_out, knon, knindex) |
---|
1300 | USE mod_phys_lmdz_para |
---|
1301 | ! Cette routine transforme un champs de la grille 2D recu du coupleur sur la grille |
---|
1302 | ! 'gathered' (la grille physiq comprime). |
---|
1303 | ! |
---|
1304 | ! |
---|
1305 | ! input: |
---|
1306 | ! champ_in champ sur la grille 2D |
---|
1307 | ! knon nombre de points dans le domaine a traiter |
---|
1308 | ! knindex index des points de la surface a traiter |
---|
1309 | ! |
---|
1310 | ! output: |
---|
1311 | ! champ_out champ sur la grille 'gatherd' |
---|
1312 | ! |
---|
1313 | INCLUDE "dimensions.h" |
---|
1314 | |
---|
1315 | ! Input |
---|
1316 | INTEGER, INTENT(IN) :: knon |
---|
1317 | REAL, DIMENSION(iim,jj_nb), INTENT(IN) :: champ_in |
---|
1318 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
1319 | |
---|
1320 | ! Output |
---|
1321 | REAL, DIMENSION(klon_mpi), INTENT(OUT) :: champ_out |
---|
1322 | |
---|
1323 | ! Local |
---|
1324 | INTEGER :: i, ig |
---|
1325 | REAL, DIMENSION(klon_mpi) :: temp_mpi |
---|
1326 | REAL, DIMENSION(klon) :: temp_omp |
---|
1327 | |
---|
1328 | !************************************************************************************* |
---|
1329 | ! |
---|
1330 | |
---|
1331 | |
---|
1332 | ! Transform from 2 dimensions (iim,jj_nb) to 1 dimension (klon) |
---|
1333 | !$OMP MASTER |
---|
1334 | CALL Grid2Dto1D_mpi(champ_in,temp_mpi) |
---|
1335 | !$OMP END MASTER |
---|
1336 | |
---|
1337 | CALL scatter_omp(temp_mpi,temp_omp) |
---|
1338 | |
---|
1339 | ! Compress from klon to knon |
---|
1340 | DO i = 1, knon |
---|
1341 | ig = knindex(i) |
---|
1342 | champ_out(i) = temp_omp(ig) |
---|
1343 | ENDDO |
---|
1344 | |
---|
1345 | END SUBROUTINE cpl2gath |
---|
1346 | ! |
---|
1347 | !************************************************************************************* |
---|
1348 | ! |
---|
1349 | SUBROUTINE gath2cpl(champ_in, champ_out, knon, knindex) |
---|
1350 | USE mod_phys_lmdz_para |
---|
1351 | ! Cette routine ecrit un champ 'gathered' sur la grille 2D pour le passer |
---|
1352 | ! au coupleur. |
---|
1353 | ! |
---|
1354 | ! input: |
---|
1355 | ! champ_in champ sur la grille gathere |
---|
1356 | ! knon nombre de points dans le domaine a traiter |
---|
1357 | ! knindex index des points de la surface a traiter |
---|
1358 | ! |
---|
1359 | ! output: |
---|
1360 | ! champ_out champ sur la grille 2D |
---|
1361 | ! |
---|
1362 | INCLUDE "dimensions.h" |
---|
1363 | |
---|
1364 | ! Input arguments |
---|
1365 | !************************************************************************************* |
---|
1366 | INTEGER, INTENT(IN) :: knon |
---|
1367 | REAL, DIMENSION(klon), INTENT(IN) :: champ_in |
---|
1368 | INTEGER, DIMENSION(klon), INTENT(IN) :: knindex |
---|
1369 | |
---|
1370 | ! Output arguments |
---|
1371 | !************************************************************************************* |
---|
1372 | REAL, DIMENSION(iim,jj_nb), INTENT(OUT) :: champ_out |
---|
1373 | |
---|
1374 | ! Local variables |
---|
1375 | !************************************************************************************* |
---|
1376 | INTEGER :: i, ig |
---|
1377 | REAL, DIMENSION(klon) :: temp_omp |
---|
1378 | REAL, DIMENSION(klon_mpi) :: temp_mpi |
---|
1379 | !************************************************************************************* |
---|
1380 | |
---|
1381 | ! Decompress from knon to klon |
---|
1382 | temp_omp = 0. |
---|
1383 | DO i = 1, knon |
---|
1384 | ig = knindex(i) |
---|
1385 | temp_omp(ig) = champ_in(i) |
---|
1386 | ENDDO |
---|
1387 | |
---|
1388 | ! Transform from 1 dimension (klon) to 2 dimensions (iim,jj_nb) |
---|
1389 | CALL gather_omp(temp_omp,temp_mpi) |
---|
1390 | |
---|
1391 | !$OMP MASTER |
---|
1392 | CALL Grid1Dto2D_mpi(temp_mpi,champ_out) |
---|
1393 | |
---|
1394 | IF (is_north_pole) champ_out(:,1)=temp_mpi(1) |
---|
1395 | IF (is_south_pole) champ_out(:,jj_nb)=temp_mpi(klon) |
---|
1396 | !$OMP END MASTER |
---|
1397 | |
---|
1398 | END SUBROUTINE gath2cpl |
---|
1399 | ! |
---|
1400 | !************************************************************************************* |
---|
1401 | ! |
---|
1402 | END MODULE cpl_mod |
---|
1403 | |
---|