source: LMDZ5/trunk/libf/phylmd/concvl.F90 @ 2241

SUBROUTINE concvl(iflag_clos, &
                  dtime, paprs, pplay, &
                  t, q, t_wake, q_wake, s_wake, u, v, tra, ntra, &
                  Ale, Alp, sig1, w01, &
                  d_t, d_q, d_u, d_v, d_tra, &
                  rain, snow, kbas, ktop, sigd, &
                  cbmf, plcl, plfc, wbeff, upwd, dnwd, dnwdbis, &
                  Ma, mip, Vprecip, &
                  cape, cin, tvp, Tconv, iflag, &
                  pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, &
                  qcondc, wd, pmflxr, pmflxs, &
!RomP >>>
!!     .             da,phi,mp,dd_t,dd_q,lalim_conv,wght_th)
                  da, phi, mp, phi2, d1a, dam, sij, clw, elij, &     ! RomP
                  dd_t, dd_q, lalim_conv, wght_th, &                 ! RomP
                  evap, ep, epmlmMm, eplaMm, &                       ! RomP
                  wdtrainA, wdtrainM, wght, qtc, sigt, &
                  tau_cld_cv, coefw_cld_cv)                           ! RomP+RL, AJ
!RomP <<<
! **************************************************************
! *
! CONCVL                                                      *
! *
! *
! written by   : Sandrine Bony-Lena, 17/05/2003, 11.16.04    *
! modified by :                                               *
! **************************************************************


  USE dimphy
  USE infotrac, ONLY: nbtr
  USE phys_local_var_mod, ONLY: omega
  IMPLICIT NONE
! ======================================================================
! Auteur(s): S. Bony-Lena (LMD/CNRS) date: ???
! Objet: schema de convection de Emanuel (1991) interface
! ======================================================================
! Arguments:
! dtime--input-R-pas d'integration (s)
! s-------input-R-la vAleur "s" pour chaque couche
! sigs----input-R-la vAleur "sigma" de chaque couche
! sig-----input-R-la vAleur de "sigma" pour chaque niveau
! psolpa--input-R-la pression au sol (en Pa)
! pskapa--input-R-exponentiel kappa de psolpa
! h-------input-R-enthAlpie potentielle (Cp*T/P**kappa)
! q-------input-R-vapeur d'eau (en kg/kg)

! work*: input et output: deux variables de travail,
! on peut les mettre a 0 au debut
! ALE--------input-R-energie disponible pour soulevement
! ALP--------input-R-puissance disponible pour soulevement

! d_h--------output-R-increment de l'enthAlpie potentielle (h)
! d_q--------output-R-increment de la vapeur d'eau
! rain-------output-R-la pluie (mm/s)
! snow-------output-R-la neige (mm/s)
! upwd-------output-R-saturated updraft mass flux (kg/m**2/s)
! dnwd-------output-R-saturated downdraft mass flux (kg/m**2/s)
! dnwd0------output-R-unsaturated downdraft mass flux (kg/m**2/s)
! Ma---------output-R-adiabatic ascent mass flux (kg/m2/s)
! mip--------output-R-mass flux shed by adiabatic ascent (kg/m2/s)
! Vprecip----output-R-vertical profile of precipitations (kg/m2/s)
! Tconv------output-R-environment temperature seen by convective scheme (K)
! Cape-------output-R-CAPE (J/kg)
! Cin -------output-R-CIN  (J/kg)
! Tvp--------output-R-Temperature virtuelle d'une parcelle soulevee
! adiabatiquement a partir du niveau 1 (K)
! deltapb----output-R-distance entre LCL et base de la colonne (<0 ; Pa)
! Ice_flag---input-L-TRUE->prise en compte de la thermodynamique de la glace
! dd_t-------output-R-increment de la temperature du aux descentes precipitantes
! dd_q-------output-R-increment de la vapeur d'eau du aux desc precip
! lalim_conv-
! wght_th----
! evap-------output-R
! ep---------output-R
! epmlmMm----output-R
! eplaMm-----output-R
! wdtrainA---output-R
! wdtrainM---output-R
! wght-------output-R
! ======================================================================


  include "clesphys.h"
  include "dimensions.h"

  INTEGER iflag_clos

  REAL dtime, paprs(klon, klev+1), pplay(klon, klev)
  REAL t(klon, klev), q(klon, klev), u(klon, klev), v(klon, klev)
  REAL t_wake(klon, klev), q_wake(klon, klev)
  REAL s_wake(klon)
  REAL tra(klon, klev, nbtr)
  INTEGER ntra
  REAL sig1(klon, klev), w01(klon, klev), ptop2(klon)
  REAL pmflxr(klon, klev+1), pmflxs(klon, klev+1)
  REAL Ale(klon), Alp(klon)

  REAL d_t(klon, klev), d_q(klon, klev), d_u(klon, klev), d_v(klon, klev)
  REAL dd_t(klon, klev), dd_q(klon, klev)
  REAL d_tra(klon, klev, nbtr)
  REAL rain(klon), snow(klon)

  INTEGER kbas(klon), ktop(klon)
  REAL em_ph(klon, klev+1), em_p(klon, klev)
  REAL upwd(klon, klev), dnwd(klon, klev), dnwdbis(klon, klev)

!!       REAL Ma(klon,klev), mip(klon,klev),Vprecip(klon,klev)     !jyg
  REAL Ma(klon, klev), mip(klon, klev), Vprecip(klon, klev+1)      !jyg
  REAL wght(klon, klev)                                            !RL

  REAL da(klon, klev), phi(klon, klev, klev), mp(klon, klev)
! RomP >>>
  REAL phi2(klon, klev, klev)
  REAL d1a(klon, klev), dam(klon, klev)
  REAL sij(klon, klev, klev), clw(klon, klev), elij(klon, klev, klev)
  REAL wdtrainA(klon, klev), wdtrainM(klon, klev)
  REAL evap(klon, klev), ep(klon, klev)
  REAL epmlmMm(klon, klev, klev), eplaMm(klon, klev)
! RomP <<<
  REAL cape(klon), cin(klon), tvp(klon, klev)
  REAL Tconv(klon, klev)

!CR:test: on passe lentr et alim_star des thermiques
  INTEGER lalim_conv(klon)
  REAL wght_th(klon, klev)
  REAL em_sig1feed ! sigma at lower bound of feeding layer
  REAL em_sig2feed ! sigma at upper bound of feeding layer
  REAL em_wght(klev) ! weight density determining the feeding mixture
!on enleve le save
! SAVE em_sig1feed,em_sig2feed,em_wght

  INTEGER iflag(klon)
  REAL rflag(klon)
  REAL pbase(klon), bbase(klon)
  REAL dtvpdt1(klon, klev), dtvpdq1(klon, klev)
  REAL dplcldt(klon), dplcldr(klon)
  REAL qcondc(klon, klev)
  REAL qtc(klon, klev)
  REAL sigt(klon, klev)
  REAL wd(klon)
  REAL plim1(klon), plim2(klon), asupmax(klon, klev)
  REAL supmax0(klon), asupmaxmin(klon)

  REAL sigd(klon)
  REAL zx_t, zdelta, zx_qs, zcor
  REAL tau_cld_cv, coefw_cld_cv

!   INTEGER iflag_mix
!   SAVE iflag_mix
  INTEGER noff, minorig
  INTEGER i, k, itra
  REAL qs(klon, klev), qs_wake(klon, klev)
  REAL cbmf(klon), plcl(klon), plfc(klon), wbeff(klon)
!LF          SAVE cbmf
!IM/JYG      REAL, SAVE, ALLOCATABLE :: cbmf(:)
!!!$OMP THREADPRIVATE(cbmf)!
  REAL cbmflast(klon)
  INTEGER ifrst
  SAVE ifrst
  DATA ifrst/0/
!$OMP THREADPRIVATE(ifrst)


! Variables supplementaires liees au bilan d'energie
! Real paire(klon)
!LF      Real ql(klon,klev)
! Save paire
!LF      Save ql
!LF      Real t1(klon,klev),q1(klon,klev)
!LF      Save t1,q1
! Data paire /1./
  REAL, SAVE, ALLOCATABLE :: ql(:, :), q1(:, :), t1(:, :)
!$OMP THREADPRIVATE(ql, q1, t1)

! Variables liees au bilan d'energie et d'enthAlpi
  REAL ztsol(klon)
  REAL        h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
              h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
  SAVE        h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot, &
              h_qs_tot, qw_tot, ql_tot, qs_tot, ec_tot
!$OMP THREADPRIVATE(h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot)
!$OMP THREADPRIVATE(h_qs_tot, qw_tot, ql_tot, qs_tot , ec_tot)
  REAL        d_h_vcol, d_h_dair, d_qt, d_qw, d_ql, d_qs, d_ec
  REAL        d_h_vcol_phy
  REAL        fs_bound, fq_bound
  SAVE        d_h_vcol_phy
!$OMP THREADPRIVATE(d_h_vcol_phy)
  REAL        zero_v(klon)
  CHARACTER *15 ztit
  INTEGER     ip_ebil ! PRINT level for energy conserv. diag.
  SAVE        ip_ebil
  DATA        ip_ebil/2/
!$OMP THREADPRIVATE(ip_ebil)
  INTEGER     if_ebil ! level for energy conserv. dignostics
  SAVE        if_ebil
  DATA        if_ebil/2/
!$OMP THREADPRIVATE(if_ebil)
!+jld ec_conser
  REAL d_t_ec(klon, klev) ! tendance du a la conersion Ec -> E thermique
  REAL zrcpd
!-jld ec_conser
!LF
  INTEGER nloc
  LOGICAL, SAVE            :: first = .TRUE.
!$OMP THREADPRIVATE(first)
  INTEGER, SAVE            :: itap, igout
!$OMP THREADPRIVATE(itap, igout)


  include "YOMCST.h"
  include "YOMCST2.h"
  include "YOETHF.h"
  include "FCTTRE.h"
  include "iniprint.h"

  IF (first) THEN
! Allocate some variables LF 04/2008

!IM/JYG allocate(cbmf(klon))
    ALLOCATE (ql(klon,klev))
    ALLOCATE (t1(klon,klev))
    ALLOCATE (q1(klon,klev))
    itap = 0
    igout = klon/2 + 1/klon
  END IF
! Incrementer le compteur de la physique
  itap = itap + 1

! Copy T into Tconv
  DO k = 1, klev
    DO i = 1, klon
      Tconv(i, k) = t(i, k)
    END DO
  END DO

  IF (if_ebil>=1) THEN
    DO i = 1, klon
      ztsol(i) = t(i, 1)
      zero_v(i) = 0.
      DO k = 1, klev
        ql(i, k) = 0.
      END DO
    END DO
  END IF

! ym
  snow(:) = 0

! IF (ifrst .EQ. 0) THEN
! ifrst = 1
  IF (first) THEN
    first = .FALSE.

! ===========================================================================
! READ IN PARAMETERS FOR THE CLOSURE AND THE MIXING DISTRIBUTION
! ===========================================================================

    IF (iflag_con==3) THEN
!      CALL cv3_inicp()
      CALL cv3_inip()
    END IF

! ===========================================================================
! READ IN PARAMETERS FOR CONVECTIVE INHIBITION BY TROPOS. DRYNESS
! ===========================================================================

! c$$$         open (56,file='supcrit.data')
! c$$$         read (56,*) Supcrit1, Supcrit2
! c$$$         close (56)

    IF (prt_level>=10) WRITE (lunout, *) 'supcrit1, supcrit2', supcrit1, supcrit2

! ===========================================================================
! Initialisation pour les bilans d'eau et d'energie
! ===========================================================================
    IF (if_ebil>=1) d_h_vcol_phy = 0.

    DO i = 1, klon
      cbmf(i) = 0.
!!          plcl(i) = 0.
      sigd(i) = 0.
    END DO
  END IF !(ifrst .EQ. 0)

! Initialisation a chaque pas de temps
  plfc(:) = 0.
  wbeff(:) = 100.
  plcl(:) = 0.

  DO k = 1, klev + 1
    DO i = 1, klon
      em_ph(i, k) = paprs(i, k)/100.0
      pmflxr(i, k) = 0.
      pmflxs(i, k) = 0.
    END DO
  END DO

  DO k = 1, klev
    DO i = 1, klon
      em_p(i, k) = pplay(i, k)/100.0
    END DO
  END DO


! Feeding layer

  em_sig1feed = 1.
  em_sig2feed = 0.97
! em_sig2feed = 0.8
! Relative Weight densities
  DO k = 1, klev
    em_wght(k) = 1.
  END DO
!CRtest: couche alim des tehrmiques ponderee par a*
! DO i = 1, klon
! do k=1,lalim_conv(i)
! em_wght(k)=wght_th(i,k)
! print*,'em_wght=',em_wght(k),wght_th(i,k)
! end do
! END DO

  IF (iflag_con==4) THEN
    DO k = 1, klev
      DO i = 1, klon
        zx_t = t(i, k)
        zdelta = max(0., sign(1.,rtt-zx_t))
        zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
        zcor = 1./(1.-retv*zx_qs)
        qs(i, k) = zx_qs*zcor
      END DO
      DO i = 1, klon
        zx_t = t_wake(i, k)
        zdelta = max(0., sign(1.,rtt-zx_t))
        zx_qs = min(0.5, r2es*foeew(zx_t,zdelta)/em_p(i,k)/100.0)
        zcor = 1./(1.-retv*zx_qs)
        qs_wake(i, k) = zx_qs*zcor
      END DO
    END DO
  ELSE ! iflag_con=3 (modif de puristes qui fait la diffce pour la convergence numerique)
    DO k = 1, klev
      DO i = 1, klon
        zx_t = t(i, k)
        zdelta = max(0., sign(1.,rtt-zx_t))
        zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
        zx_qs = min(0.5, zx_qs)
        zcor = 1./(1.-retv*zx_qs)
        zx_qs = zx_qs*zcor
        qs(i, k) = zx_qs
      END DO
      DO i = 1, klon
        zx_t = t_wake(i, k)
        zdelta = max(0., sign(1.,rtt-zx_t))
        zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
        zx_qs = min(0.5, zx_qs)
        zcor = 1./(1.-retv*zx_qs)
        zx_qs = zx_qs*zcor
        qs_wake(i, k) = zx_qs
      END DO
    END DO
  END IF ! iflag_con

! ------------------------------------------------------------------

! Main driver for convection:
!                   iflag_con=3 -> nvlle version de KE (JYG)
!                   iflag_con = 30  -> equivAlent to convect3
!                   iflag_con = 4  -> equivAlent to convect1/2


  IF (iflag_con==30) THEN

! print *, '-> cv_driver'      !jyg
    CALL cv_driver(klon, klev, klevp1, ntra, iflag_con, &
                   t, q, qs, u, v, tra, &
                   em_p, em_ph, iflag, &
                   d_t, d_q, d_u, d_v, d_tra, rain, &
                   Vprecip, cbmf, sig1, w01, & !jyg
                   kbas, ktop, &
                   dtime, Ma, upwd, dnwd, dnwdbis, qcondc, wd, cape, &
                   da, phi, mp, phi2, d1a, dam, sij, clw, elij, &       !RomP
                   evap, ep, epmlmMm, eplaMm, &                         !RomP
                   wdtrainA, wdtrainM)                                  !RomP
!           print *, 'cv_driver ->'      !jyg

    DO i = 1, klon
      cbmf(i) = Ma(i, kbas(i))
    END DO

!RL
    wght(:, :) = 0.
    DO i = 1, klon
      wght(i, 1) = 1.
    END DO
!RL

  ELSE

!LF   necessary for gathered fields
    nloc = klon
    CALL cva_driver(klon, klev, klev+1, ntra, nloc, &
                    iflag_con, iflag_mix, iflag_ice_thermo, &
                    iflag_clos, ok_conserv_q, dtime, &
                    t, q, qs, t_wake, q_wake, qs_wake, s_wake, u, v, tra, &
                    em_p, em_ph, &
                    Ale, Alp, omega, &
                    em_sig1feed, em_sig2feed, em_wght, &
                    iflag, d_t, d_q, d_u, d_v, d_tra, rain, kbas, ktop, &
                    cbmf, plcl, plfc, wbeff, sig1, w01, ptop2, sigd, &
                    Ma, mip, Vprecip, upwd, dnwd, dnwdbis, qcondc, wd, &
                    cape, cin, tvp, &
                    dd_t, dd_q, plim1, plim2, asupmax, supmax0, &
                    asupmaxmin, lalim_conv, &
!AC!+!RomP+jyg
!!                   da,phi,mp,phi2,d1a,dam,sij,clw,elij, &               ! RomP
!!                   evap,ep,epmlmMm,eplaMm,                              ! RomP
                    da, phi, mp, phi2, d1a, dam, sij, wght, &           ! RomP+RL
                    clw, elij, evap, ep, epmlmMm, eplaMm, &             ! RomP+RL
                    wdtrainA, wdtrainM, qtc, sigt, &
                    tau_cld_cv, coefw_cld_cv)                           ! RomP,AJ
!AC!+!RomP+jyg
  END IF
! ------------------------------------------------------------------
  IF (prt_level>=10) WRITE (lunout, *) ' cva_driver -> cbmf,plcl,plfc,wbeff ', &
                                         cbmf(1), plcl(1), plfc(1), wbeff(1)

  DO i = 1, klon
    rain(i) = rain(i)/86400.
    rflag(i) = iflag(i)
  END DO

  DO k = 1, klev
    DO i = 1, klon
      d_t(i, k) = dtime*d_t(i, k)
      d_q(i, k) = dtime*d_q(i, k)
      d_u(i, k) = dtime*d_u(i, k)
      d_v(i, k) = dtime*d_v(i, k)
    END DO
  END DO

  IF (iflag_con==30) THEN
    DO itra = 1, ntra
      DO k = 1, klev
        DO i = 1, klon
!RL!            d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
          d_tra(i, k, itra) = 0.
        END DO
      END DO
    END DO
  END IF

!!AC!
  IF (iflag_con==3) THEN
    DO itra = 1, ntra
      DO k = 1, klev
        DO i = 1, klon
!RL!            d_tra(i,k,itra) =dtime*d_tra(i,k,itra)
          d_tra(i, k, itra) = 0.
        END DO
      END DO
    END DO
  END IF
!!AC!

  DO k = 1, klev
    DO i = 1, klon
      t1(i, k) = t(i, k) + d_t(i, k)
      q1(i, k) = q(i, k) + d_q(i, k)
    END DO
  END DO
!                                                   !jyg
! --Separation neige/pluie (pour diagnostics)       !jyg
  DO k = 1, klev                                    !jyg
    DO i = 1, klon                                  !jyg
      IF (t1(i,k)<rtt) THEN                         !jyg
        pmflxs(i, k) = Vprecip(i, k)                !jyg
      ELSE                                          !jyg
        pmflxr(i, k) = Vprecip(i, k)                !jyg
      END IF                                        !jyg
    END DO                                          !jyg
  END DO                                            !jyg

! c      IF (if_ebil.ge.2) THEN
! c        ztit='after convect'
! c        CALL diagetpq(paire,ztit,ip_ebil,2,2,dtime
! c     e      , t1,q1,ql,qs,u,v,paprs,pplay
! c     s      , d_h_vcol, d_qt, d_qw, d_ql, d_qs, d_ec)
! c         call diagphy(paire,ztit,ip_ebil
! c     e      , zero_v, zero_v, zero_v, zero_v, zero_v
! c     e      , zero_v, rain, zero_v, ztsol
! c     e      , d_h_vcol, d_qt, d_ec
! c     s      , fs_bound, fq_bound )
! c      END IF


! les traceurs ne sont pas mis dans cette version de convect4:
  IF (iflag_con==4) THEN
    DO itra = 1, ntra
      DO k = 1, klev
        DO i = 1, klon
          d_tra(i, k, itra) = 0.
        END DO
      END DO
    END DO
  END IF
! print*, 'concvl->: dd_t,dd_q ',dd_t(1,1),dd_q(1,1)

  DO k = 1, klev
    DO i = 1, klon
      dtvpdt1(i, k) = 0.
      dtvpdq1(i, k) = 0.
    END DO
  END DO
  DO i = 1, klon
    dplcldt(i) = 0.
    dplcldr(i) = 0.
  END DO

  IF (prt_level>=20) THEN
    DO k = 1, klev
! print*,'physiq apres_add_con i k it d_u d_v d_t d_q qdl0',igout, &
!         k,itap,d_u_con(igout,k) ,d_v_con(igout,k), d_t_con(igout,k), &
!         d_q_con(igout,k),dql0(igout,k)
! print*,'phys apres_add_con itap Ma cin ALE ALP wak t q undi t q', &
!         itap,Ma(igout,k),cin(igout),ALE(igout), ALP(igout), &
!         t_wake(igout,k),q_wake(igout,k),t_undi(igout,k),q_undi(igout,k)
! print*,'phy apres_add_con itap CON rain snow EMA wk1 wk2 Vpp mip', &
!         itap,rain_con(igout),snow_con(igout),ema_work1(igout,k), &
!         ema_work2(igout,k),Vprecip(igout,k), mip(igout,k)
! print*,'phy apres_add_con itap upwd dnwd dnwd0 cape tvp Tconv ', &
!         itap,upwd(igout,k),dnwd(igout,k),dnwd0(igout,k),cape(igout), &
!         tvp(igout,k),Tconv(igout,k)
! print*,'phy apres_add_con itap dtvpdt dtvdq dplcl dplcldr qcondc', &
!         itap,dtvpdt1(igout,k),dtvpdq1(igout,k),dplcldt(igout), &
!         dplcldr(igout),qcondc(igout,k)
! print*,'phy apres_add_con itap wd pmflxr Kpmflxr Kp1 Kpmflxs Kp1', &
!         itap,wd(igout),pmflxr(igout,k),pmflxr(igout,k+1),pmflxs(igout,k), &
!         pmflxs(igout,k+1)
! print*,'phy apres_add_con itap da phi mp ftd fqd lalim wgth', &
!         itap,da(igout,k),phi(igout,k,k),mp(igout,k),ftd(igout,k), &
!         fqd(igout,k),lalim_conv(igout),wght_th(igout,k)
    END DO
  END IF !(prt_level.EQ.20) THEN

  RETURN
END SUBROUTINE concvl