source: LMDZ5/trunk/libf/dyn3dmem/caldyn_loc.F @ 2590

Last change on this file since 2590 was 1987, checked in by Ehouarn Millour, 11 years ago

Add updating pressure, mass and Exner function (ie: all variables which depend on surface pressure) after adding physics tendencies (which include a surface pressure tendency).
Note that this change induces slight changes in GCM results with respect to previous svn version of the code, even if surface pressure tendency is zero (because of recomputation of polar values as an average over polar points on the dynamics grid).
EM

  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
File size: 6.4 KB
RevLine 
[1632]1!
[1987]2! $Id: $
[1632]3!
4#undef DEBUG_IO
5!#define DEBUG_IO
6
7      SUBROUTINE caldyn_loc
8     $ (itau,ucov,vcov,teta,ps,masse,pk,pkf,phis ,
9     $  phi,conser,du,dv,dteta,dp,w,pbaru,pbarv,time )
[1823]10      USE parallel_lmdz
[1632]11      USE Write_Field_loc
[1987]12      USE caldyn_mod, ONLY: vcont, ucont, ang, p, massebx, masseby,
13     &                      vorpot, ecin, bern, massebxy, convm
[1632]14     
15      IMPLICIT NONE
16
[1987]17!=======================================================================
18!
19!  Auteur :  P. Le Van
20!
21!   Objet:
22!   ------
23!
24!   Calcul des tendances dynamiques.
25!
26! Modif 04/93 F.Forget
27!=======================================================================
[1632]28
[1987]29!-----------------------------------------------------------------------
30!   0. Declarations:
31!   ----------------
[1632]32
33#include "dimensions.h"
34#include "paramet.h"
35#include "comconst.h"
36#include "comvert.h"
37#include "comgeom.h"
38
[1987]39!   Arguments:
40!   ----------
[1632]41
[1987]42      LOGICAL,INTENT(IN) :: conser ! triggers printing some diagnostics ! not used
43      INTEGER,INTENT(IN) :: itau ! time step index ! not used
44      REAL,INTENT(IN) :: vcov(ijb_v:ije_v,llm) ! covariant meridional wind
45      REAL,INTENT(IN) :: ucov(ijb_u:ije_u,llm) ! covariant zonal wind
46      REAL,INTENT(IN) :: teta(ijb_u:ije_u,llm) ! potential temperature
47      REAL,INTENT(IN) :: ps(ijb_u:ije_u) ! surface pressure
48      REAL,INTENT(IN) :: phis(ijb_u:ije_u) ! geopotential at the surface
49      REAL,INTENT(IN) :: pk(iip1,jjb_u:jje_u,llm) ! Exner at mid-layer
50      REAL,INTENT(IN) :: pkf(ijb_u:ije_u,llm) ! filtered Exner
51      REAL,INTENT(IN) :: phi(ijb_u:ije_u,llm) ! geopotential
52      REAL,INTENT(OUT) :: masse(ijb_u:ije_u,llm) ! air mass
53      REAL,INTENT(OUT) :: dv(ijb_v:ije_v,llm) ! tendency on vcov
54      REAL,INTENT(OUT) :: du(ijb_u:ije_u,llm) ! tendency on ucov
55      REAL,INTENT(OUT) :: dteta(ijb_u:ije_u,llm) ! tenddency on teta
56      REAL,INTENT(OUT) :: dp(ijb_u:ije_u) ! tendency on ps
57      REAL,INTENT(OUT) :: w(ijb_u:ije_u,llm) ! vertical velocity
58      REAL,INTENT(OUT) :: pbaru(ijb_u:ije_u,llm) ! mass flux in the zonal direction
59      REAL,INTENT(OUT) :: pbarv(ijb_v:ije_v,llm) ! mass flux in the meridional direction
60      REAL,INTENT(IN) :: time ! current time
[1632]61
[1987]62!   Local:
63!   ------
[1632]64
65      INTEGER   ij,l,ijb,ije,ierr
66
67
[1987]68!-----------------------------------------------------------------------
69!   Compute dynamical tendencies:
70!--------------------------------
71
72      ! compute contravariant winds ucont() and vcont
[1632]73      CALL covcont_loc  ( llm    , ucov    , vcov , ucont, vcont     )
[1987]74      ! compute pressure p()
[1632]75      CALL pression_loc ( ip1jmp1, ap      , bp   ,  ps  , p         )
76cym      CALL psextbar (   ps   , psexbarxy                          )
77c$OMP BARRIER
[1987]78      ! compute mass in each atmospheric mesh: masse()
[1632]79      CALL massdair_loc (    p   , masse                             )
[1987]80      ! compute X and Y-averages of mass, massebx() and masseby()
[1632]81      CALL massbar_loc  (   masse, massebx , masseby                 )
[1987]82      ! compute XY-average of mass, massebxy()
[1632]83      call massbarxy_loc(   masse, massebxy                          )
[1987]84      ! compute mass fluxes pbaru() and pbarv()
[1632]85      CALL flumass_loc  ( massebx, masseby,vcont,ucont,pbaru,pbarv   )
[1987]86      ! compute dteta() , horizontal converging flux of theta
[1632]87      CALL dteta1_loc   (   teta , pbaru   , pbarv, dteta            )
[1987]88      ! compute convm(), horizontal converging flux of mass
[1632]89      CALL convmas1_loc  (   pbaru, pbarv   , convm                  )
90c$OMP BARRIER     
91      CALL convmas2_loc  (   convm                      )
92c$OMP BARRIER
93#ifdef DEBUG_IO
94      call WriteField_u('ucont',ucont)
95      call WriteField_v('vcont',vcont)
96      call WriteField_u('p',p)
97      call WriteField_u('masse',masse)
98      call WriteField_u('massebx',massebx)
99      call WriteField_v('masseby',masseby)
100      call WriteField_v('massebxy',massebxy)
101      call WriteField_u('pbaru',pbaru)
102      call WriteField_v('pbarv',pbarv)
103      call WriteField_u('dteta',dteta)
104      call WriteField_u('convm',convm)
105#endif     
106
107c$OMP BARRIER
108c$OMP MASTER
109      ijb=ij_begin
110      ije=ij_end
[1987]111      ! compute pressure variation due to mass convergence
[1632]112      DO ij =ijb, ije
113         dp( ij ) = convm( ij,1 ) / airesurg( ij )
114      ENDDO
115c$OMP END MASTER
116c$OMP BARRIER
[1987]117     
118      ! compute vertical velocity w()
[1632]119      CALL vitvert_loc ( convm  , w                                )
[1987]120      ! compute potential vorticity vorpot()
[1632]121      CALL tourpot_loc ( vcov   , ucov  , massebxy  , vorpot       )
[1987]122      ! compute rotation induced du() and dv()
[1632]123      CALL dudv1_loc   ( vorpot , pbaru , pbarv     , du     , dv  )
124
125#ifdef DEBUG_IO     
126      call WriteField_u('w',w)
127      call WriteField_v('vorpot',vorpot)
128      call WriteField_u('du',du)
129      call WriteField_v('dv',dv)
130#endif     
[1987]131     
132      ! compute kinetic energy ecin()
[1632]133      CALL enercin_loc ( vcov   , ucov  , vcont   , ucont  , ecin  )
[1987]134      ! compute Bernouilli function bern()
[1632]135      CALL bernoui_loc ( ip1jmp1, llm   , phi       , ecin   , bern)
[1987]136      ! compute and add du() and dv() contributions from Bernouilli and pressure
[1632]137      CALL dudv2_loc   ( teta   , pkf   , bern      , du     , dv  )
138
139#ifdef DEBUG_IO
140      call WriteField_u('ecin',ecin)
141      call WriteField_u('bern',bern)
142      call WriteField_u('du',du)
143      call WriteField_v('dv',dv)
144      call WriteField_u('pkf',pkf)
145#endif
146     
147      ijb=ij_begin-iip1
148      ije=ij_end+iip1
149     
150      if (pole_nord) ijb=ij_begin
151      if (pole_sud) ije=ij_end
152
153c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)       
154      DO l=1,llm
155         DO ij=ijb,ije
156            ang(ij,l) = ucov(ij,l) + constang(ij)
157        ENDDO
158      ENDDO
159c$OMP END DO
160
[1987]161      ! compute vertical advection contributions to du(), dv() and dteta()
[1632]162      CALL advect_new_loc(ang,vcov,teta,w,massebx,masseby,du,dv,dteta)
163
164C  WARNING probleme de peridocite de dv sur les PC/linux. Pb d'arrondi
165C          probablement. Observe sur le code compile avec pgf90 3.0-1
166      ijb=ij_begin
167      ije=ij_end
168      if (pole_sud) ije=ij_end-iip1
169
170c$OMP DO SCHEDULE(STATIC,OMP_CHUNK)
171      DO l = 1, llm
172         DO ij = ijb, ije, iip1
173           IF( dv(ij,l).NE.dv(ij+iim,l) )  THEN
174c         PRINT *,'!!!ATTENTION!!! probleme de periodicite sur vcov', 
175c    ,   ' dans caldyn'
176c         PRINT *,' l,  ij = ', l, ij, ij+iim,dv(ij+iim,l),dv(ij,l)
177          dv(ij+iim,l) = dv(ij,l)
178          endif
179         enddo
180      enddo
181c$OMP END DO NOWAIT     
182
[1987]183! Ehouarn: NB: output of control variables not implemented...
[1632]184
185      RETURN
186      END
Note: See TracBrowser for help on using the repository browser.