[1279] | 1 | ! $Id$ |
---|
| 2 | ! |
---|
[1114] | 3 | MODULE infotrac |
---|
| 4 | |
---|
| 5 | ! nqtot : total number of tracers and higher order of moment, water vapor and liquid included |
---|
| 6 | INTEGER, SAVE :: nqtot |
---|
[2086] | 7 | !CR: on ajoute le nombre de traceurs de l eau |
---|
| 8 | INTEGER, SAVE :: nqo |
---|
[1114] | 9 | |
---|
| 10 | ! nbtr : number of tracers not including higher order of moment or water vapor or liquid |
---|
| 11 | ! number of tracers used in the physics |
---|
| 12 | INTEGER, SAVE :: nbtr |
---|
| 13 | |
---|
[2270] | 14 | ! CRisi: nb traceurs pères= directement advectés par l'air |
---|
| 15 | INTEGER, SAVE :: nqperes |
---|
| 16 | |
---|
[1114] | 17 | ! Name variables |
---|
| 18 | CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics |
---|
| 19 | CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics |
---|
| 20 | |
---|
| 21 | ! iadv : index of trasport schema for each tracer |
---|
| 22 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv |
---|
| 23 | |
---|
| 24 | ! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the |
---|
| 25 | ! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code. |
---|
| 26 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique |
---|
| 27 | |
---|
[2270] | 28 | ! CRisi: tableaux de fils |
---|
| 29 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqfils |
---|
| 30 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqdesc ! nombres de fils + nombre de tous les petits fils sur toutes les générations |
---|
| 31 | INTEGER, SAVE :: nqdesc_tot |
---|
| 32 | INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqfils |
---|
| 33 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iqpere |
---|
| 34 | |
---|
[1279] | 35 | ! conv_flg(it)=0 : convection desactivated for tracer number it |
---|
[1114] | 36 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg |
---|
[1279] | 37 | ! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it |
---|
[1114] | 38 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg |
---|
| 39 | |
---|
[1279] | 40 | CHARACTER(len=4),SAVE :: type_trac |
---|
[2180] | 41 | CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym |
---|
[2270] | 42 | |
---|
| 43 | ! CRisi: cas particulier des isotopes |
---|
| 44 | LOGICAL,SAVE :: ok_isotopes,ok_iso_verif,ok_isotrac,ok_init_iso |
---|
| 45 | INTEGER :: niso_possibles |
---|
| 46 | PARAMETER ( niso_possibles=5) |
---|
| 47 | real, DIMENSION (niso_possibles),SAVE :: tnat,alpha_ideal |
---|
| 48 | LOGICAL, DIMENSION(niso_possibles),SAVE :: use_iso |
---|
| 49 | INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqiso ! donne indice iq en fn de (ixt,phase) |
---|
| 50 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_num ! donne numéro iso entre 1 et niso_possibles en fn de nqtot |
---|
| 51 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_indnum ! donne numéro iso entre 1 et niso effectif en fn de nqtot |
---|
| 52 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: zone_num ! donne numéro de la zone de tracage en fn de nqtot |
---|
| 53 | INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: phase_num ! donne numéro de la zone de tracage en fn de nqtot |
---|
| 54 | INTEGER, DIMENSION(niso_possibles), SAVE :: indnum_fn_num ! donne indice entre entre 1 et niso en fonction du numéro d isotope entre 1 et niso_possibles |
---|
| 55 | INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: index_trac ! numéro ixt en fn izone, indnum entre 1 et niso |
---|
| 56 | INTEGER,SAVE :: niso,ntraceurs_zone,ntraciso |
---|
[1279] | 57 | |
---|
[1114] | 58 | CONTAINS |
---|
| 59 | |
---|
| 60 | SUBROUTINE infotrac_init |
---|
[1403] | 61 | USE control_mod |
---|
[1565] | 62 | #ifdef REPROBUS |
---|
| 63 | USE CHEM_REP, ONLY : Init_chem_rep_trac |
---|
| 64 | #endif |
---|
[1114] | 65 | IMPLICIT NONE |
---|
| 66 | !======================================================================= |
---|
| 67 | ! |
---|
| 68 | ! Auteur: P. Le Van /L. Fairhead/F.Hourdin |
---|
| 69 | ! ------- |
---|
| 70 | ! Modif special traceur F.Forget 05/94 |
---|
| 71 | ! Modif M-A Filiberti 02/02 lecture de traceur.def |
---|
| 72 | ! |
---|
| 73 | ! Objet: |
---|
| 74 | ! ------ |
---|
| 75 | ! GCM LMD nouvelle grille |
---|
| 76 | ! |
---|
| 77 | !======================================================================= |
---|
| 78 | ! ... modification de l'integration de q ( 26/04/94 ) .... |
---|
| 79 | !----------------------------------------------------------------------- |
---|
| 80 | ! Declarations |
---|
| 81 | |
---|
| 82 | INCLUDE "dimensions.h" |
---|
| 83 | INCLUDE "iniprint.h" |
---|
| 84 | |
---|
| 85 | ! Local variables |
---|
| 86 | INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema |
---|
| 87 | INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema |
---|
| 88 | |
---|
[1279] | 89 | CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name |
---|
[2270] | 90 | CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name: CRisi |
---|
[1114] | 91 | CHARACTER(len=3), DIMENSION(30) :: descrq |
---|
| 92 | CHARACTER(len=1), DIMENSION(3) :: txts |
---|
| 93 | CHARACTER(len=2), DIMENSION(9) :: txtp |
---|
[1454] | 94 | CHARACTER(len=23) :: str1,str2 |
---|
[1114] | 95 | |
---|
| 96 | INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment |
---|
| 97 | INTEGER :: iq, new_iq, iiq, jq, ierr |
---|
[2270] | 98 | INTEGER :: ifils,ipere,generation ! CRisi |
---|
| 99 | LOGICAL :: continu,nouveau_traceurdef |
---|
| 100 | INTEGER :: IOstatus ! gestion de la retrocompatibilite de traceur.def |
---|
| 101 | CHARACTER(len=15) :: tchaine |
---|
[1454] | 102 | |
---|
| 103 | character(len=*),parameter :: modname="infotrac_init" |
---|
[1114] | 104 | !----------------------------------------------------------------------- |
---|
| 105 | ! Initialization : |
---|
| 106 | ! |
---|
| 107 | txts=(/'x','y','z'/) |
---|
| 108 | txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/) |
---|
| 109 | |
---|
| 110 | descrq(14)='VLH' |
---|
| 111 | descrq(10)='VL1' |
---|
| 112 | descrq(11)='VLP' |
---|
| 113 | descrq(12)='FH1' |
---|
| 114 | descrq(13)='FH2' |
---|
| 115 | descrq(16)='PPM' |
---|
| 116 | descrq(17)='PPS' |
---|
| 117 | descrq(18)='PPP' |
---|
| 118 | descrq(20)='SLP' |
---|
| 119 | descrq(30)='PRA' |
---|
[1279] | 120 | |
---|
[1114] | 121 | |
---|
[1569] | 122 | ! Coherence test between parameter type_trac, config_inca and preprocessing keys |
---|
[1563] | 123 | IF (type_trac=='inca') THEN |
---|
| 124 | WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', & |
---|
| 125 | type_trac,' config_inca=',config_inca |
---|
[2180] | 126 | IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN |
---|
[1563] | 127 | WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def' |
---|
| 128 | CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1) |
---|
| 129 | END IF |
---|
[1569] | 130 | #ifndef INCA |
---|
| 131 | WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code' |
---|
| 132 | CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1) |
---|
| 133 | #endif |
---|
[1565] | 134 | ELSE IF (type_trac=='repr') THEN |
---|
| 135 | WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac |
---|
[1569] | 136 | #ifndef REPROBUS |
---|
| 137 | WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code' |
---|
| 138 | CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1) |
---|
| 139 | #endif |
---|
[1563] | 140 | ELSE IF (type_trac == 'lmdz') THEN |
---|
| 141 | WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac |
---|
[1279] | 142 | ELSE |
---|
[1563] | 143 | WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops' |
---|
| 144 | CALL abort_gcm('infotrac_init','bad parameter',1) |
---|
[1279] | 145 | END IF |
---|
| 146 | |
---|
[1563] | 147 | |
---|
| 148 | ! Test if config_inca is other then none for run without INCA |
---|
| 149 | IF (type_trac/='inca' .AND. config_inca/='none') THEN |
---|
| 150 | WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model' |
---|
| 151 | config_inca='none' |
---|
| 152 | END IF |
---|
| 153 | |
---|
| 154 | |
---|
[1114] | 155 | !----------------------------------------------------------------------- |
---|
| 156 | ! |
---|
| 157 | ! 1) Get the true number of tracers + water vapor/liquid |
---|
| 158 | ! Here true tracers (nqtrue) means declared tracers (only first order) |
---|
| 159 | ! |
---|
| 160 | !----------------------------------------------------------------------- |
---|
[1565] | 161 | IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN |
---|
[1114] | 162 | OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr) |
---|
| 163 | IF(ierr.EQ.0) THEN |
---|
[1454] | 164 | WRITE(lunout,*) trim(modname),': Open traceur.def : ok' |
---|
[1114] | 165 | READ(90,*) nqtrue |
---|
[2270] | 166 | write(lunout,*) 'nqtrue=',nqtrue |
---|
[1114] | 167 | ELSE |
---|
[1454] | 168 | WRITE(lunout,*) trim(modname),': Problem in opening traceur.def' |
---|
| 169 | WRITE(lunout,*) trim(modname),': WARNING using defaut values' |
---|
| 170 | if (planet_type=='earth') then |
---|
| 171 | nqtrue=4 ! Default value for Earth |
---|
| 172 | else |
---|
| 173 | nqtrue=1 ! Default value for other planets |
---|
| 174 | endif |
---|
[1114] | 175 | END IF |
---|
[2262] | 176 | !jyg< |
---|
| 177 | !! if ( planet_type=='earth') then |
---|
| 178 | !! ! For Earth, water vapour & liquid tracers are not in the physics |
---|
| 179 | !! nbtr=nqtrue-2 |
---|
| 180 | !! else |
---|
| 181 | !! ! Other planets (for now); we have the same number of tracers |
---|
| 182 | !! ! in the dynamics than in the physics |
---|
| 183 | !! nbtr=nqtrue |
---|
| 184 | !! endif |
---|
| 185 | !>jyg |
---|
[1563] | 186 | ELSE ! type_trac=inca |
---|
[2262] | 187 | !jyg< |
---|
| 188 | ! The traceur.def file is used to define the number "nqo" of water phases |
---|
| 189 | ! present in the simulation. Default : nqo = 2. |
---|
| 190 | OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr) |
---|
| 191 | IF(ierr.EQ.0) THEN |
---|
| 192 | WRITE(lunout,*) trim(modname),': Open traceur.def : ok' |
---|
| 193 | READ(90,*) nqo |
---|
| 194 | ELSE |
---|
| 195 | WRITE(lunout,*) trim(modname),': Using default value for nqo' |
---|
| 196 | nqo=2 |
---|
| 197 | ENDIF |
---|
| 198 | IF (nqo /= 2 .OR. nqo /= 3 ) THEN |
---|
| 199 | WRITE(lunout,*) trim(modname),': nqo=',nqo, ' is not allowded. Only 2 or 3 water phases allowed' |
---|
| 200 | CALL abort_gcm('infotrac_init','Bad number of water phases',1) |
---|
| 201 | END IF |
---|
[1563] | 202 | ! nbtr has been read from INCA by init_const_lmdz() in gcm.F |
---|
[2262] | 203 | nqtrue=nbtr+nqo |
---|
| 204 | !! nqtrue=nbtr+2 |
---|
| 205 | END IF ! type_trac |
---|
| 206 | !>jyg |
---|
[1114] | 207 | |
---|
[1454] | 208 | IF ((planet_type=="earth").and.(nqtrue < 2)) THEN |
---|
| 209 | WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum' |
---|
[1114] | 210 | CALL abort_gcm('infotrac_init','Not enough tracers',1) |
---|
| 211 | END IF |
---|
[1563] | 212 | |
---|
[2262] | 213 | !jyg< |
---|
[1565] | 214 | ! Transfert number of tracers to Reprobus |
---|
[2262] | 215 | !! IF (type_trac == 'repr') THEN |
---|
| 216 | !!#ifdef REPROBUS |
---|
| 217 | !! CALL Init_chem_rep_trac(nbtr) |
---|
| 218 | !!#endif |
---|
| 219 | !! END IF |
---|
| 220 | !>jyg |
---|
[1563] | 221 | |
---|
[1114] | 222 | ! |
---|
[2262] | 223 | ! Allocate variables depending on nqtrue |
---|
[1114] | 224 | ! |
---|
[2270] | 225 | ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue),tnom_transp(nqtrue)) |
---|
[2262] | 226 | ! |
---|
| 227 | !jyg< |
---|
| 228 | !! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr)) |
---|
| 229 | !! conv_flg(:) = 1 ! convection activated for all tracers |
---|
| 230 | !! pbl_flg(:) = 1 ! boundary layer activated for all tracers |
---|
| 231 | !>jyg |
---|
[1114] | 232 | |
---|
| 233 | !----------------------------------------------------------------------- |
---|
| 234 | ! 2) Choix des schemas d'advection pour l'eau et les traceurs |
---|
| 235 | ! |
---|
| 236 | ! iadv = 1 schema transport type "humidite specifique LMD" |
---|
| 237 | ! iadv = 2 schema amont |
---|
| 238 | ! iadv = 14 schema Van-leer + humidite specifique |
---|
| 239 | ! Modif F.Codron |
---|
| 240 | ! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide) |
---|
| 241 | ! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv |
---|
| 242 | ! iadv = 12 schema Frederic Hourdin I |
---|
| 243 | ! iadv = 13 schema Frederic Hourdin II |
---|
| 244 | ! iadv = 16 schema PPM Monotone(Collela & Woodward 1984) |
---|
| 245 | ! iadv = 17 schema PPM Semi Monotone (overshoots autorisés) |
---|
| 246 | ! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés) |
---|
| 247 | ! iadv = 20 schema Slopes |
---|
| 248 | ! iadv = 30 schema Prather |
---|
| 249 | ! |
---|
| 250 | ! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur |
---|
| 251 | ! iq = 2 pour l'eau liquide |
---|
| 252 | ! Et eventuellement iq = 3,nqtot pour les autres traceurs |
---|
| 253 | ! |
---|
| 254 | ! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq. |
---|
| 255 | !------------------------------------------------------------------------ |
---|
| 256 | ! |
---|
| 257 | ! Get choice of advection schema from file tracer.def or from INCA |
---|
| 258 | !--------------------------------------------------------------------- |
---|
[1565] | 259 | IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN |
---|
[1114] | 260 | IF(ierr.EQ.0) THEN |
---|
| 261 | ! Continue to read tracer.def |
---|
| 262 | DO iq=1,nqtrue |
---|
[2270] | 263 | |
---|
| 264 | write(*,*) 'infotrac 237: iq=',iq |
---|
| 265 | ! CRisi: ajout du nom du fluide transporteur |
---|
| 266 | ! mais rester retro compatible |
---|
| 267 | READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine |
---|
| 268 | write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq) |
---|
| 269 | write(lunout,*) 'tchaine=',trim(tchaine) |
---|
| 270 | write(*,*) 'infotrac 238: IOstatus=',IOstatus |
---|
| 271 | if (IOstatus.ne.0) then |
---|
| 272 | CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1) |
---|
| 273 | endif |
---|
| 274 | ! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un |
---|
| 275 | ! espace ou pas au milieu de la chaine. |
---|
| 276 | continu=1 |
---|
| 277 | nouveau_traceurdef=0 |
---|
| 278 | iiq=1 |
---|
| 279 | do while (continu) |
---|
| 280 | if (tchaine(iiq:iiq).eq.' ') then |
---|
| 281 | nouveau_traceurdef=1 |
---|
| 282 | continu=0 |
---|
| 283 | else if (iiq.lt.LEN_TRIM(tchaine)) then |
---|
| 284 | iiq=iiq+1 |
---|
| 285 | else |
---|
| 286 | continu=0 |
---|
| 287 | endif |
---|
| 288 | enddo |
---|
| 289 | write(*,*) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef |
---|
| 290 | if (nouveau_traceurdef) then |
---|
| 291 | write(lunout,*) 'C''est la nouvelle version de traceur.def' |
---|
| 292 | tnom_0(iq)=tchaine(1:iiq-1) |
---|
| 293 | tnom_transp(iq)=tchaine(iiq+1:15) |
---|
| 294 | else |
---|
| 295 | write(lunout,*) 'C''est l''ancienne version de traceur.def' |
---|
| 296 | write(lunout,*) 'On suppose que les traceurs sont tous d''air' |
---|
| 297 | tnom_0(iq)=tchaine |
---|
| 298 | tnom_transp(iq) = 'air' |
---|
| 299 | endif |
---|
| 300 | write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>' |
---|
| 301 | write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>' |
---|
| 302 | |
---|
| 303 | END DO !DO iq=1,nqtrue |
---|
[1114] | 304 | CLOSE(90) |
---|
[2270] | 305 | |
---|
[1454] | 306 | ELSE ! Without tracer.def, set default values |
---|
| 307 | if (planet_type=="earth") then |
---|
| 308 | ! for Earth, default is to have 4 tracers |
---|
[1114] | 309 | hadv(1) = 14 |
---|
| 310 | vadv(1) = 14 |
---|
| 311 | tnom_0(1) = 'H2Ov' |
---|
[2270] | 312 | tnom_transp(1) = 'air' |
---|
[1114] | 313 | hadv(2) = 10 |
---|
| 314 | vadv(2) = 10 |
---|
| 315 | tnom_0(2) = 'H2Ol' |
---|
[2270] | 316 | tnom_transp(2) = 'air' |
---|
[1114] | 317 | hadv(3) = 10 |
---|
| 318 | vadv(3) = 10 |
---|
| 319 | tnom_0(3) = 'RN' |
---|
[2270] | 320 | tnom_transp(3) = 'air' |
---|
[1114] | 321 | hadv(4) = 10 |
---|
| 322 | vadv(4) = 10 |
---|
| 323 | tnom_0(4) = 'PB' |
---|
[2270] | 324 | tnom_transp(4) = 'air' |
---|
[1454] | 325 | else ! default for other planets |
---|
| 326 | hadv(1) = 10 |
---|
| 327 | vadv(1) = 10 |
---|
| 328 | tnom_0(1) = 'dummy' |
---|
[2270] | 329 | tnom_transp(1) = 'dummy' |
---|
[1454] | 330 | endif ! of if (planet_type=="earth") |
---|
[1114] | 331 | END IF |
---|
| 332 | |
---|
[1454] | 333 | WRITE(lunout,*) trim(modname),': Valeur de traceur.def :' |
---|
| 334 | WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue |
---|
[1114] | 335 | DO iq=1,nqtrue |
---|
[2270] | 336 | WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq),tnom_transp(iq) |
---|
[1114] | 337 | END DO |
---|
| 338 | |
---|
[2262] | 339 | if ( planet_type=='earth') then |
---|
| 340 | !CR: nombre de traceurs de l eau |
---|
| 341 | if (tnom_0(3) == 'H2Oi') then |
---|
| 342 | nqo=3 |
---|
| 343 | else |
---|
| 344 | nqo=2 |
---|
| 345 | endif |
---|
| 346 | ! For Earth, water vapour & liquid tracers are not in the physics |
---|
| 347 | nbtr=nqtrue-nqo |
---|
| 348 | else |
---|
| 349 | ! Other planets (for now); we have the same number of tracers |
---|
| 350 | ! in the dynamics than in the physics |
---|
| 351 | nbtr=nqtrue |
---|
| 352 | endif |
---|
| 353 | |
---|
| 354 | ENDIF ! (type_trac == 'lmdz' .OR. type_trac == 'repr') |
---|
| 355 | !jyg< |
---|
| 356 | ! |
---|
| 357 | ! Transfert number of tracers to Reprobus |
---|
| 358 | IF (type_trac == 'repr') THEN |
---|
| 359 | #ifdef REPROBUS |
---|
| 360 | CALL Init_chem_rep_trac(nbtr) |
---|
| 361 | #endif |
---|
| 362 | END IF |
---|
| 363 | ! |
---|
| 364 | ! Allocate variables depending on nbtr |
---|
| 365 | ! |
---|
| 366 | ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr)) |
---|
| 367 | conv_flg(:) = 1 ! convection activated for all tracers |
---|
| 368 | pbl_flg(:) = 1 ! boundary layer activated for all tracers |
---|
| 369 | ! |
---|
| 370 | !! ELSE ! type_trac=inca : config_inca='aero' ou 'chem' |
---|
| 371 | ! |
---|
| 372 | IF (type_trac == 'inca') THEN ! config_inca='aero' ou 'chem' |
---|
| 373 | !>jyg |
---|
[1114] | 374 | ! le module de chimie fournit les noms des traceurs |
---|
| 375 | ! et les schemas d'advection associes. |
---|
| 376 | |
---|
| 377 | #ifdef INCA |
---|
| 378 | CALL init_transport( & |
---|
| 379 | hadv, & |
---|
| 380 | vadv, & |
---|
| 381 | conv_flg, & |
---|
| 382 | pbl_flg, & |
---|
[2180] | 383 | solsym) |
---|
[1114] | 384 | #endif |
---|
| 385 | tnom_0(1)='H2Ov' |
---|
| 386 | tnom_0(2)='H2Ol' |
---|
[2262] | 387 | IF (nqo == 3) tnom_0(3)='H2Oi' !! jyg |
---|
[1114] | 388 | |
---|
[2262] | 389 | !jyg< |
---|
| 390 | DO iq = nqo+1, nqtrue |
---|
| 391 | tnom_0(iq)=solsym(iq-nqo) |
---|
[1114] | 392 | END DO |
---|
[2262] | 393 | !! DO iq =3,nqtrue |
---|
| 394 | !! tnom_0(iq)=solsym(iq-2) |
---|
| 395 | !! END DO |
---|
| 396 | !! nqo = 2 |
---|
| 397 | !>jyg |
---|
[1114] | 398 | |
---|
[2262] | 399 | END IF ! (type_trac == 'inca') |
---|
[1114] | 400 | |
---|
| 401 | !----------------------------------------------------------------------- |
---|
| 402 | ! |
---|
| 403 | ! 3) Verify if advection schema 20 or 30 choosen |
---|
| 404 | ! Calculate total number of tracers needed: nqtot |
---|
| 405 | ! Allocate variables depending on total number of tracers |
---|
| 406 | !----------------------------------------------------------------------- |
---|
| 407 | new_iq=0 |
---|
| 408 | DO iq=1,nqtrue |
---|
| 409 | ! Add tracers for certain advection schema |
---|
| 410 | IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN |
---|
| 411 | new_iq=new_iq+1 ! no tracers added |
---|
| 412 | ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN |
---|
| 413 | new_iq=new_iq+4 ! 3 tracers added |
---|
| 414 | ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN |
---|
| 415 | new_iq=new_iq+10 ! 9 tracers added |
---|
| 416 | ELSE |
---|
[1454] | 417 | WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq) |
---|
[1114] | 418 | CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1) |
---|
| 419 | END IF |
---|
| 420 | END DO |
---|
| 421 | |
---|
| 422 | IF (new_iq /= nqtrue) THEN |
---|
| 423 | ! The choice of advection schema imposes more tracers |
---|
| 424 | ! Assigne total number of tracers |
---|
| 425 | nqtot = new_iq |
---|
| 426 | |
---|
[1454] | 427 | WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers' |
---|
[1114] | 428 | WRITE(lunout,*) 'makes it necessary to add tracers' |
---|
[1454] | 429 | WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers' |
---|
| 430 | WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed' |
---|
[1114] | 431 | |
---|
| 432 | ELSE |
---|
| 433 | ! The true number of tracers is also the total number |
---|
| 434 | nqtot = nqtrue |
---|
| 435 | END IF |
---|
| 436 | |
---|
| 437 | ! |
---|
| 438 | ! Allocate variables with total number of tracers, nqtot |
---|
| 439 | ! |
---|
| 440 | ALLOCATE(tname(nqtot), ttext(nqtot)) |
---|
| 441 | ALLOCATE(iadv(nqtot), niadv(nqtot)) |
---|
| 442 | |
---|
| 443 | !----------------------------------------------------------------------- |
---|
| 444 | ! |
---|
| 445 | ! 4) Determine iadv, long and short name |
---|
| 446 | ! |
---|
| 447 | !----------------------------------------------------------------------- |
---|
| 448 | new_iq=0 |
---|
| 449 | DO iq=1,nqtrue |
---|
| 450 | new_iq=new_iq+1 |
---|
| 451 | |
---|
| 452 | ! Verify choice of advection schema |
---|
| 453 | IF (hadv(iq)==vadv(iq)) THEN |
---|
| 454 | iadv(new_iq)=hadv(iq) |
---|
| 455 | ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN |
---|
| 456 | iadv(new_iq)=11 |
---|
| 457 | ELSE |
---|
[1454] | 458 | WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq) |
---|
| 459 | |
---|
[1114] | 460 | CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1) |
---|
| 461 | END IF |
---|
| 462 | |
---|
| 463 | str1=tnom_0(iq) |
---|
| 464 | tname(new_iq)= tnom_0(iq) |
---|
| 465 | IF (iadv(new_iq)==0) THEN |
---|
[1454] | 466 | ttext(new_iq)=trim(str1) |
---|
[1114] | 467 | ELSE |
---|
[1454] | 468 | ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq)) |
---|
[1114] | 469 | END IF |
---|
| 470 | |
---|
| 471 | ! schemas tenant compte des moments d'ordre superieur |
---|
| 472 | str2=ttext(new_iq) |
---|
| 473 | IF (iadv(new_iq)==20) THEN |
---|
| 474 | DO jq=1,3 |
---|
| 475 | new_iq=new_iq+1 |
---|
| 476 | iadv(new_iq)=-20 |
---|
[1454] | 477 | ttext(new_iq)=trim(str2)//txts(jq) |
---|
| 478 | tname(new_iq)=trim(str1)//txts(jq) |
---|
[1114] | 479 | END DO |
---|
| 480 | ELSE IF (iadv(new_iq)==30) THEN |
---|
| 481 | DO jq=1,9 |
---|
| 482 | new_iq=new_iq+1 |
---|
| 483 | iadv(new_iq)=-30 |
---|
[1454] | 484 | ttext(new_iq)=trim(str2)//txtp(jq) |
---|
| 485 | tname(new_iq)=trim(str1)//txtp(jq) |
---|
[1114] | 486 | END DO |
---|
| 487 | END IF |
---|
| 488 | END DO |
---|
| 489 | |
---|
| 490 | ! |
---|
| 491 | ! Find vector keeping the correspodence between true and total tracers |
---|
| 492 | ! |
---|
| 493 | niadv(:)=0 |
---|
| 494 | iiq=0 |
---|
| 495 | DO iq=1,nqtot |
---|
| 496 | IF(iadv(iq).GE.0) THEN |
---|
| 497 | ! True tracer |
---|
| 498 | iiq=iiq+1 |
---|
| 499 | niadv(iiq)=iq |
---|
| 500 | ENDIF |
---|
| 501 | END DO |
---|
| 502 | |
---|
| 503 | |
---|
[1454] | 504 | WRITE(lunout,*) trim(modname),': Information stored in infotrac :' |
---|
| 505 | WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :' |
---|
[1114] | 506 | DO iq=1,nqtot |
---|
[1454] | 507 | WRITE(lunout,*) iadv(iq),niadv(iq),& |
---|
| 508 | ' ',trim(tname(iq)),' ',trim(ttext(iq)) |
---|
[1114] | 509 | END DO |
---|
| 510 | |
---|
[1279] | 511 | ! |
---|
| 512 | ! Test for advection schema. |
---|
| 513 | ! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) . |
---|
| 514 | ! |
---|
| 515 | DO iq=1,nqtot |
---|
| 516 | IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN |
---|
[1454] | 517 | WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ' |
---|
[1279] | 518 | CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1) |
---|
| 519 | ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN |
---|
[1454] | 520 | WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ' |
---|
[1279] | 521 | CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1) |
---|
| 522 | END IF |
---|
| 523 | END DO |
---|
| 524 | |
---|
[2270] | 525 | |
---|
| 526 | ! CRisi: quels sont les traceurs fils et les traceurs pères. |
---|
| 527 | ! initialiser tous les tableaux d'indices liés aux traceurs familiaux |
---|
| 528 | ! + vérifier que tous les pères sont écrits en premières positions |
---|
| 529 | ALLOCATE(nqfils(nqtot),nqdesc(nqtot)) |
---|
| 530 | ALLOCATE(iqfils(nqtot,nqtot)) |
---|
| 531 | ALLOCATE(iqpere(nqtot)) |
---|
| 532 | nqperes=0 |
---|
| 533 | nqfils(:)=0 |
---|
| 534 | nqdesc(:)=0 |
---|
| 535 | iqfils(:,:)=0 |
---|
| 536 | iqpere(:)=0 |
---|
| 537 | nqdesc_tot=0 |
---|
| 538 | DO iq=1,nqtot |
---|
| 539 | if (tnom_transp(iq) == 'air') then |
---|
| 540 | ! ceci est un traceur père |
---|
| 541 | WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un pere' |
---|
| 542 | nqperes=nqperes+1 |
---|
| 543 | iqpere(iq)=0 |
---|
| 544 | else !if (tnom_transp(iq) == 'air') then |
---|
| 545 | ! ceci est un fils. Qui est son père? |
---|
| 546 | WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un fils' |
---|
| 547 | continu=.true. |
---|
| 548 | ipere=1 |
---|
| 549 | do while (continu) |
---|
| 550 | if (tnom_transp(iq) == tnom_0(ipere)) then |
---|
| 551 | ! Son père est ipere |
---|
| 552 | WRITE(lunout,*) 'Le traceur',iq,'appele ', & |
---|
| 553 | & trim(tnom_0(iq)),' est le fils de ',ipere,'appele ',trim(tnom_0(ipere)) |
---|
| 554 | nqfils(ipere)=nqfils(ipere)+1 |
---|
| 555 | iqfils(nqfils(ipere),ipere)=iq |
---|
| 556 | iqpere(iq)=ipere |
---|
| 557 | continu=.false. |
---|
| 558 | else !if (tnom_transp(iq) == tnom_0(ipere)) then |
---|
| 559 | ipere=ipere+1 |
---|
| 560 | if (ipere.gt.nqtot) then |
---|
| 561 | WRITE(lunout,*) 'Le traceur',iq,'appele ', & |
---|
| 562 | & trim(tnom_0(iq)),', est orpelin.' |
---|
| 563 | CALL abort_gcm('infotrac_init','Un traceur est orphelin',1) |
---|
| 564 | endif !if (ipere.gt.nqtot) then |
---|
| 565 | endif !if (tnom_transp(iq) == tnom_0(ipere)) then |
---|
| 566 | enddo !do while (continu) |
---|
| 567 | endif !if (tnom_transp(iq) == 'air') then |
---|
| 568 | enddo !DO iq=1,nqtot |
---|
| 569 | WRITE(lunout,*) 'infotrac: nqperes=',nqperes |
---|
| 570 | WRITE(lunout,*) 'nqfils=',nqfils |
---|
| 571 | WRITE(lunout,*) 'iqpere=',iqpere |
---|
| 572 | WRITE(lunout,*) 'iqfils=',iqfils |
---|
| 573 | |
---|
| 574 | ! Calculer le nombre de descendants à partir de iqfils et de nbfils |
---|
| 575 | DO iq=1,nqtot |
---|
| 576 | generation=0 |
---|
| 577 | continu=.true. |
---|
| 578 | ifils=iq |
---|
| 579 | do while (continu) |
---|
| 580 | ipere=iqpere(ifils) |
---|
| 581 | if (ipere.gt.0) then |
---|
| 582 | nqdesc(ipere)=nqdesc(ipere)+1 |
---|
| 583 | nqdesc_tot=nqdesc_tot+1 |
---|
| 584 | iqfils(nqdesc(ipere),ipere)=iq |
---|
| 585 | ifils=ipere |
---|
| 586 | generation=generation+1 |
---|
| 587 | else !if (ipere.gt.0) then |
---|
| 588 | continu=.false. |
---|
| 589 | endif !if (ipere.gt.0) then |
---|
| 590 | enddo !do while (continu) |
---|
| 591 | WRITE(lunout,*) 'Le traceur ',iq,', appele ',trim(tnom_0(iq)),' est un traceur de generation: ',generation |
---|
| 592 | enddo !DO iq=1,nqtot |
---|
| 593 | WRITE(lunout,*) 'infotrac: nqdesc=',nqdesc |
---|
| 594 | WRITE(lunout,*) 'iqfils=',iqfils |
---|
| 595 | WRITE(lunout,*) 'nqdesc_tot=',nqdesc_tot |
---|
| 596 | |
---|
| 597 | ! Interdire autres schémas que 10 pour les traceurs fils, et autres schémas |
---|
| 598 | ! que 10 et 14 si des pères ont des fils |
---|
| 599 | do iq=1,nqtot |
---|
| 600 | if (iqpere(iq).gt.0) then |
---|
| 601 | ! ce traceur a un père qui n'est pas l'air |
---|
| 602 | ! Seul le schéma 10 est autorisé |
---|
| 603 | if (iadv(iq)/=10) then |
---|
| 604 | WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for sons' |
---|
| 605 | CALL abort_gcm('infotrac_init','Sons should be advected by scheme 10',1) |
---|
| 606 | endif |
---|
| 607 | ! Le traceur père ne peut être advecté que par schéma 10 ou 14: |
---|
| 608 | IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN |
---|
| 609 | WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for fathers' |
---|
| 610 | CALL abort_gcm('infotrac_init','Fathers should be advected by scheme 10 ou 14',1) |
---|
| 611 | endif !IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN |
---|
| 612 | endif !if (iqpere(iq).gt.0) the |
---|
| 613 | enddo !do iq=1,nqtot |
---|
| 614 | |
---|
| 615 | |
---|
| 616 | ! detecter quels sont les traceurs isotopiques parmi des traceurs |
---|
| 617 | call infotrac_isoinit(tnom_0,nqtrue) |
---|
| 618 | |
---|
[1114] | 619 | !----------------------------------------------------------------------- |
---|
| 620 | ! Finalize : |
---|
| 621 | ! |
---|
[2270] | 622 | DEALLOCATE(tnom_0, hadv, vadv,tnom_transp) |
---|
[1114] | 623 | |
---|
[2180] | 624 | |
---|
[1114] | 625 | END SUBROUTINE infotrac_init |
---|
| 626 | |
---|
[2270] | 627 | SUBROUTINE infotrac_isoinit(tnom_0,nqtrue) |
---|
| 628 | |
---|
| 629 | #ifdef CPP_IOIPSL |
---|
| 630 | use IOIPSL |
---|
| 631 | #else |
---|
| 632 | ! if not using IOIPSL, we still need to use (a local version of) getin |
---|
| 633 | use ioipsl_getincom |
---|
| 634 | #endif |
---|
| 635 | implicit none |
---|
| 636 | |
---|
| 637 | ! inputs |
---|
| 638 | INTEGER nqtrue |
---|
| 639 | CHARACTER(len=15) tnom_0(nqtrue) |
---|
| 640 | |
---|
| 641 | ! locals |
---|
| 642 | CHARACTER(len=3), DIMENSION(niso_possibles) :: tnom_iso |
---|
| 643 | INTEGER, ALLOCATABLE,DIMENSION(:,:) :: nb_iso,nb_traciso |
---|
| 644 | INTEGER, ALLOCATABLE,DIMENSION(:) :: nb_isoind |
---|
| 645 | INTEGER :: ntraceurs_zone_prec,iq,phase,ixt,iiso,izone |
---|
| 646 | CHARACTER(len=19) :: tnom_trac |
---|
| 647 | INCLUDE "iniprint.h" |
---|
| 648 | |
---|
| 649 | tnom_iso=(/'eau','HDO','O18','O17','HTO'/) |
---|
| 650 | |
---|
| 651 | ALLOCATE(nb_iso(niso_possibles,nqo)) |
---|
| 652 | ALLOCATE(nb_isoind(nqo)) |
---|
| 653 | ALLOCATE(nb_traciso(niso_possibles,nqo)) |
---|
| 654 | ALLOCATE(iso_num(nqtot)) |
---|
| 655 | ALLOCATE(iso_indnum(nqtot)) |
---|
| 656 | ALLOCATE(zone_num(nqtot)) |
---|
| 657 | ALLOCATE(phase_num(nqtot)) |
---|
| 658 | |
---|
| 659 | iso_num(:)=0 |
---|
| 660 | iso_indnum(:)=0 |
---|
| 661 | zone_num(:)=0 |
---|
| 662 | phase_num(:)=0 |
---|
| 663 | indnum_fn_num(:)=0 |
---|
| 664 | use_iso(:)=.false. |
---|
| 665 | nb_iso(:,:)=0 |
---|
| 666 | nb_isoind(:)=0 |
---|
| 667 | nb_traciso(:,:)=0 |
---|
| 668 | niso=0 |
---|
| 669 | ntraceurs_zone=0 |
---|
| 670 | ntraceurs_zone_prec=0 |
---|
| 671 | ntraciso=0 |
---|
| 672 | |
---|
| 673 | do iq=nqo+1,nqtot |
---|
| 674 | write(lunout,*) 'infotrac 569: iq,tnom_0(iq)=',iq,tnom_0(iq) |
---|
| 675 | do phase=1,nqo |
---|
| 676 | do ixt= 1,niso_possibles |
---|
| 677 | tnom_trac=trim(tnom_0(phase))//'_' |
---|
| 678 | tnom_trac=trim(tnom_trac)//trim(tnom_iso(ixt)) |
---|
| 679 | write(*,*) 'phase,ixt,tnom_trac=',phase,ixt,tnom_trac |
---|
| 680 | IF (tnom_0(iq) == tnom_trac) then |
---|
| 681 | write(lunout,*) 'Ce traceur est un isotope' |
---|
| 682 | nb_iso(ixt,phase)=nb_iso(ixt,phase)+1 |
---|
| 683 | nb_isoind(phase)=nb_isoind(phase)+1 |
---|
| 684 | iso_num(iq)=ixt |
---|
| 685 | iso_indnum(iq)=nb_isoind(phase) |
---|
| 686 | indnum_fn_num(ixt)=iso_indnum(iq) |
---|
| 687 | phase_num(iq)=phase |
---|
| 688 | write(lunout,*) 'iso_num(iq)=',iso_num(iq) |
---|
| 689 | write(lunout,*) 'iso_indnum(iq)=',iso_indnum(iq) |
---|
| 690 | write(lunout,*) 'indnum_fn_num(ixt)=',indnum_fn_num(ixt) |
---|
| 691 | write(lunout,*) 'phase_num(iq)=',phase_num(iq) |
---|
| 692 | goto 20 |
---|
| 693 | else if (iqpere(iq).gt.0) then |
---|
| 694 | if (tnom_0(iqpere(iq)) == tnom_trac) then |
---|
| 695 | write(lunout,*) 'Ce traceur est le fils d''un isotope' |
---|
| 696 | ! c'est un traceur d'isotope |
---|
| 697 | nb_traciso(ixt,phase)=nb_traciso(ixt,phase)+1 |
---|
| 698 | iso_num(iq)=ixt |
---|
| 699 | iso_indnum(iq)=indnum_fn_num(ixt) |
---|
| 700 | zone_num(iq)=nb_traciso(ixt,phase) |
---|
| 701 | phase_num(iq)=phase |
---|
| 702 | write(lunout,*) 'iso_num(iq)=',iso_num(iq) |
---|
| 703 | write(lunout,*) 'phase_num(iq)=',phase_num(iq) |
---|
| 704 | write(lunout,*) 'zone_num(iq)=',zone_num(iq) |
---|
| 705 | goto 20 |
---|
| 706 | endif !if (tnom_0(iqpere(iq)) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then |
---|
| 707 | endif !IF (tnom_0(iq) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then |
---|
| 708 | enddo !do ixt= niso_possibles |
---|
| 709 | enddo !do phase=1,nqo |
---|
| 710 | 20 continue |
---|
| 711 | enddo !do iq=1,nqtot |
---|
| 712 | |
---|
| 713 | write(lunout,*) 'iso_num=',iso_num |
---|
| 714 | write(lunout,*) 'iso_indnum=',iso_indnum |
---|
| 715 | write(lunout,*) 'zone_num=',zone_num |
---|
| 716 | write(lunout,*) 'phase_num=',phase_num |
---|
| 717 | write(lunout,*) 'indnum_fn_num=',indnum_fn_num |
---|
| 718 | |
---|
| 719 | do ixt= 1,niso_possibles |
---|
| 720 | |
---|
| 721 | if (nb_iso(ixt,1).eq.1) then |
---|
| 722 | ! on vérifie que toutes les phases ont le même nombre de |
---|
| 723 | ! traceurs |
---|
| 724 | do phase=2,nqo |
---|
| 725 | if (nb_iso(ixt,phase).ne.nb_iso(ixt,1)) then |
---|
| 726 | write(lunout,*) 'ixt,phase,nb_iso=',ixt,phase,nb_iso(ixt,phase) |
---|
| 727 | CALL abort_gcm('infotrac_init','Phases must have same number of isotopes',1) |
---|
| 728 | endif |
---|
| 729 | enddo !do phase=2,nqo |
---|
| 730 | |
---|
| 731 | niso=niso+1 |
---|
| 732 | use_iso(ixt)=.true. |
---|
| 733 | ntraceurs_zone=nb_traciso(ixt,1) |
---|
| 734 | |
---|
| 735 | ! on vérifie que toutes les phases ont le même nombre de |
---|
| 736 | ! traceurs |
---|
| 737 | do phase=2,nqo |
---|
| 738 | if (nb_traciso(ixt,phase).ne.ntraceurs_zone) then |
---|
| 739 | write(lunout,*) 'ixt,phase,nb_traciso=',ixt,phase,nb_traciso(ixt,phase) |
---|
| 740 | write(lunout,*) 'ntraceurs_zone=',ntraceurs_zone |
---|
| 741 | CALL abort_gcm('infotrac_init','Phases must have same number of tracers',1) |
---|
| 742 | endif |
---|
| 743 | enddo !do phase=2,nqo |
---|
| 744 | ! on vérifie que tous les isotopes ont le même nombre de |
---|
| 745 | ! traceurs |
---|
| 746 | if (ntraceurs_zone_prec.gt.0) then |
---|
| 747 | if (ntraceurs_zone.eq.ntraceurs_zone_prec) then |
---|
| 748 | ntraceurs_zone_prec=ntraceurs_zone |
---|
| 749 | else !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then |
---|
| 750 | write(*,*) 'ntraceurs_zone_prec,ntraceurs_zone=',ntraceurs_zone_prec,ntraceurs_zone |
---|
| 751 | CALL abort_gcm('infotrac_init', & |
---|
| 752 | &'Isotope tracers are not well defined in traceur.def',1) |
---|
| 753 | endif !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then |
---|
| 754 | endif !if (ntraceurs_zone_prec.gt.0) then |
---|
| 755 | |
---|
| 756 | else if (nb_iso(ixt,1).ne.0) then |
---|
| 757 | WRITE(lunout,*) 'nqo,ixt=',nqo,ixt |
---|
| 758 | WRITE(lunout,*) 'nb_iso(ixt,1)=',nb_iso(ixt,1) |
---|
| 759 | CALL abort_gcm('infotrac_init','Isotopes are not well defined in traceur.def',1) |
---|
| 760 | endif !if (nb_iso(ixt,1).eq.1) then |
---|
| 761 | enddo ! do ixt= niso_possibles |
---|
| 762 | |
---|
| 763 | ! dimensions isotopique: |
---|
| 764 | ntraciso=niso*(ntraceurs_zone+1) |
---|
| 765 | WRITE(lunout,*) 'niso=',niso |
---|
| 766 | WRITE(lunout,*) 'ntraceurs_zone,ntraciso=',ntraceurs_zone,ntraciso |
---|
| 767 | |
---|
| 768 | ! flags isotopiques: |
---|
| 769 | if (niso.gt.0) then |
---|
| 770 | ok_isotopes=.true. |
---|
| 771 | else |
---|
| 772 | ok_isotopes=.false. |
---|
| 773 | endif |
---|
| 774 | WRITE(lunout,*) 'ok_isotopes=',ok_isotopes |
---|
| 775 | |
---|
| 776 | if (ok_isotopes) then |
---|
| 777 | ok_iso_verif=.false. |
---|
| 778 | call getin('ok_iso_verif',ok_iso_verif) |
---|
| 779 | ok_init_iso=.false. |
---|
| 780 | call getin('ok_init_iso',ok_init_iso) |
---|
| 781 | tnat=(/1.0,155.76e-6,2005.2e-6,0.004/100.,0.0/) |
---|
| 782 | alpha_ideal=(/1.0,1.01,1.006,1.003,1.0/) |
---|
| 783 | endif !if (ok_isotopes) then |
---|
| 784 | WRITE(lunout,*) 'ok_iso_verif=',ok_iso_verif |
---|
| 785 | WRITE(lunout,*) 'ok_init_iso=',ok_init_iso |
---|
| 786 | |
---|
| 787 | if (ntraceurs_zone.gt.0) then |
---|
| 788 | ok_isotrac=.true. |
---|
| 789 | else |
---|
| 790 | ok_isotrac=.false. |
---|
| 791 | endif |
---|
| 792 | WRITE(lunout,*) 'ok_isotrac=',ok_isotrac |
---|
| 793 | |
---|
| 794 | ! remplissage du tableau iqiso(ntraciso,phase) |
---|
| 795 | ALLOCATE(iqiso(ntraciso,nqo)) |
---|
| 796 | iqiso(:,:)=0 |
---|
| 797 | do iq=1,nqtot |
---|
| 798 | if (iso_num(iq).gt.0) then |
---|
| 799 | ixt=iso_indnum(iq)+zone_num(iq)*niso |
---|
| 800 | iqiso(ixt,phase_num(iq))=iq |
---|
| 801 | endif |
---|
| 802 | enddo |
---|
| 803 | WRITE(lunout,*) 'iqiso=',iqiso |
---|
| 804 | |
---|
| 805 | ! replissage du tableau index_trac(ntraceurs_zone,niso) |
---|
| 806 | ALLOCATE(index_trac(ntraceurs_zone,niso)) |
---|
| 807 | if (ok_isotrac) then |
---|
| 808 | do iiso=1,niso |
---|
| 809 | do izone=1,ntraceurs_zone |
---|
| 810 | index_trac(izone,iiso)=iiso+izone*niso |
---|
| 811 | enddo |
---|
| 812 | enddo |
---|
| 813 | else !if (ok_isotrac) then |
---|
| 814 | index_trac(:,:)=0.0 |
---|
| 815 | endif !if (ok_isotrac) then |
---|
| 816 | write(lunout,*) 'index_trac=',index_trac |
---|
| 817 | |
---|
| 818 | ! Finalize : |
---|
| 819 | DEALLOCATE(nb_iso) |
---|
| 820 | |
---|
| 821 | END SUBROUTINE infotrac_isoinit |
---|
| 822 | |
---|
[1114] | 823 | END MODULE infotrac |
---|