source: LMDZ5/trunk/DefLists/physiq.def_NPv6.0.8 @ 2918

#
# $Id$
#
##############################################################################
# PARAMETRES ET CLES DE LA PHYSIQUE LMDZ
##############################################################################
# D: Valeur par default
#
#Parametres Orographiques et cdrags
#**********************************
##   Si=.T. ,  lecture du fichier limit avec la bonne annee 
ok_limitvrai=n
iflag_albedo=1
#Cdrags 
f_cdrag_stable=1.
f_cdrag_ter=1.

#parameter for Z0
f_cdrag_oce=1.
iflag_z0_oce=1
f_z0qh_oce=1.55
min_wind_speed=0.1

f_ri_cd_min=0.1
#cdmmax
cdmmax=2.5E-3
#cdhmax
cdhmax=2.0E-3
##  Orodr  ou  non   pour l orographie
ok_orodr=y
##  Orolf  ou  non   pour l orographie              
ok_orolf=y
#Rugoro
f_rugoro=0.
#
### Random gravity waves
#Activitate the stochastic parameterization of convective GWs (should be equal to ok_strato)
ok_gwd_rando=y
# Scale the momentum fluxes due to convective GWs
gwd_rando_ruwmax=0.23
#Scale the saturated momentum flux of  convective GWs 
gwd_rando_sat=0.60
#
gwd_front_ruwmax = 4.00

sso_gkdrag=0.2
sso_gfrcri=0.70
sso_gkwake=0.40
#
# Rayonnement
#*********************
# activation du nouveau code de rayonnement RRTM
# 0 : Ancien code et 1 : RRTM (D=0)
iflag_rrtm=1
NSW=6
#
# Parametres nuages
#******************
#seuils de la precipitation des nuages strateformes (D: 2.6e-4 2.6e-4)
cld_lc_lsc=0.00015
cld_lc_con=0.00015
#constante de temps pour eleminer eau lsc et convective (D: 3600. 3600.)
cld_tau_lsc=900.
cld_tau_con=900.
#facteurs correctifs sur la vitesse de chute des cristaux de glace (D: 1 1)
ffallv_lsc=1.
ffallv_con=1.
#coefficient sur la reevaporation de la pluie (D: 2.e-5 n)
coef_eva=2e-4
reevap_ice=y
#calcul des proprietes des nuages convectifs (D:1 0.375 1.e-4) 
iflag_cldcon=6
fact_cldcon=1.
facttemps=0.
#calcul eau condensee et fraction nuageuse a partir des PDF (D:0, 0:version avec ratqs sinon nouvelles PDFs)  
iflag_pdf=1
#calcul epaisseur optique et emmissivite des nuages (D: y 1 0.01 0.3)
ok_newmicro=y
iflag_ratqs=4
ratqsp0=37000.
ratqsdp=20000.
ratqsbas=0.002
ratqshaut=0.4
#rayon effectif pour les nuages de glace (D:35)
rad_froid=35
#rayons effectifs pour les nuages eau liq (tailles des gouttes d eau nuageuse, D: 13 9)
rad_chau1=12
rad_chau2=11
##  Choix ou non  de  New oliq               
new_oliq=y
# Seuils oliqmax, oicemax
oliqmax=1.5E-3
oicemax=1.5E-3
#Rayons min et max effectifs des particules des nuages
rei_min=16.
rei_max=61.29
#
# Flags Convection 
#*****************
#Convection scheme switch (D:2, 1:LMD, 2:Tiedtke, 3:KE New Physics, 30:KE AR4)
iflag_con=3
#output level of energy conservation diagnostics
if_ebil=0
#maximum efficiency of cld water->precipitation conversion (D: 0.993)
epmax=0.997
#dry convective adjustment at beginning of Emanuel convective scheme (D: n 0)
ok_adj_ema=n
iflag_clw=0
#Convective closure (D:1, 0:AR4, 2:ALE and ALP)
iflag_clos=2
#Convective entrainment mixing law (D:1, 0:AR4=flat PDF, 1=PDF)
iflag_mix=1
#weights of the bell shaped and flat PDF (used only if iflag_mix=1) (D: 1 0)
qqa1=1.
qqa2=0.
#Parameters of the bell shaped PDF; Fmax=center (D= 0.65), Gammas=width (D=0.05)
cvl_corr=1.0
#Multiplicative factor of Emanuel convective scheme precipitation (D: 1.)
Fmax=0.65
#
###t_top_max=275.
#
# Flags Couche limite
#********************
#shema de CL des thermiques (D:0, 0:ajustement sec,=>1:versions thermiques) 
iflag_thermals=18
#pas de temps du spliting pour les thermiques
nsplit_thermals=1
tau_thermals=0.
iflag_thermals_ed=8
fact_thermals_ed_dz=0.1
iflag_thermals_optflux=0
#shema de la couche de surface (D:1, 1:LMD, 8:Mellor-Yamada) 
iflag_pbl=11
#diffusion turbulente
ksta_ter=1.e-7
ksta=1.e-10
#ok_kzmin : calcul Kzmin dans la CL de surface
ok_kzmin=y
#couplage ou non avec la convection
iflag_coupl=5 (0:AR4 et 1:nouvelle physique)
seuil_inversion=-0.08
#rendement sur la puissance fournie par les thermiques a la convection
alp_bl_k=0.5
#
## temperature dependency of qsat for iterative procedure
## temporary flag to switch between the old (CMIP5, D=0) and new versions (=1) versions 
iflag_fisrtilp_qsat=4 
## Reactivation du calcul d'un zmax continu pour les thermiques
## reactivation d'une fermeture humide des thermiques  iflag_thermals_closure=2 (D=1)
iflag_thermals_closure=1
#
# Flags wakes
#************
#Wake scheme switch (D:0, 0:AR4, 1:New Physics)
iflag_wake=1
#Constant value to be added to Alp (D: 0.)
alp_offset=0.

### nrlmd le 10/04/2012: Declenchement ###
#Declenchement par couche-limite (0: deterministe, 1: stochastique)
iflag_trig_bl=1
#Surface critique au LCL
s_trig=1.2e7
#Temps de decorrelation entre scenes de cumulus
tau_trig_shallow=1200
#Temps de decorrelation entre scenes de cumulonimbus
tau_trig_deep=1200
# Pour la stabilisation
random_notrig_max=0.99
ok_adjwk=y
tmax_fonte_cv=278.15
#
flag_wk_check_trgl=y
#
cv_flag_feed=2

### nrlmd le 10/04/2012: Fermeture ###
#Fermeture par couche-limite (0: deterministe, 1: statistique, 2: statistique+convergence grande echelle)
iflag_clos_bl=1
### fin nrlmd le 10/04/2012

## Modification de la plage de temperature pour la phase mixte liquide/glace des nuages
## Controle par les t_glace_min/max, exposant_glace, iflag_t_glace (D=0)
t_glace_min=243.15
t_glace_max=273.15
exposant_glace=2.
iflag_t_glace=2
iflag_ice_thermo=1

#
## The source terms of the TKE prognostic equation are diagnosed from tendencies (du, dv, dT) 
## associated with subrgrid scaleamotions and treated as an additional heat source.
## Controled by a key, iflag_ener_conserv (D=-1):
## 0 : no conservation, -1 : old adhoc correction for kinetic E only (used for CMIP5) 
## 1 : conservation, 101 : conversion from kinetic to heat only, 110 conversion from potential to heat only
iflag_ener_conserv=1

#Activation of corrections for water conservation (D: n). 
##The default is n for compatibility with earlier versions.
##generally it should be y.
ok_conserv_q=y 

iflag_cloudth_vert=3

#
lmixmin=10.
#pbl_lmixmin_alpha=0.05

#Bergeron
iflag_bergeron=1


### Convection
#altitude, in hPa, above LCL at which buoybase is computed, def = original: -40
dpbase=-40.
#altitude, in hPa, above LCL below which Ep=0, def = original: 150, used only if flag_epKEorig=0
pbcrit=150.0
#altitude, in hPa, above LCL above which Ep=Epmax, def = original: 500, used only if flag_epKEorig=0
ptcrit=500.0
#reference fractional area of precipitating downdraughts, def = original: 0.01
sigdz=0.01
#unsaturated fraction of precipitating downdraughts, def = original: 0.15
spfac=0.15
#relaxation time of cloud base mass flux, def = original: 8000
tau=8000.
#flag for wb (= vert velocity at LFC); 0->wb=wbmax, 1->wb=f(plfc) bounded, 2->wb=f(plfc) linear, def = 1
flag_wb=1
#parameter used in the computation of wb, def = 6.
wbmax=6.
#
ok_convstop=.False.
#
tau_stop=15000.
#
ok_intermittent=.False.
#shedding coefficient (used when iflag_mix_adiab=1)
coef_peel=0.25
#
### Clouds
#Conversion cld water->precip: Ep=f(pressure) if 0; Ep=f(temperature) if 1, def=1
flag_epKEorig=1
#max condensed water concentration in kg/kg, def=0.0003, original: 0.0011, used only if flag_epKEorig=1
elcrit=0.00025
#temperature in degre Celsius, at which Ep=Epmax, def=-55., original: -55, used only if flag_epKEorig=1
tlcrit=-40.

### Wakes
#coefficient in Wape->C_star formula: C_star=stark*sqrt(2*Wape), def: 0.33
stark=0.33
#lifting efficiency of wakes; Alp=Alpk*Fip, Fip=power provided by wakes, def: 0.25
alpk=0.25
#wake density = number of wake centers per m2, def: 8.E-12
#wdens_ref=8.E-12
wdens_ref_o=8.e-12
wdens_ref_l=8.e-12
#
#multiplicative factor of the damping by gravity waves, def: 4.
coefgw=4.
#
alb_vis_sno_lic=0.96
alb_nir_sno_lic=0.68
inertie_sno=350.