Context Navigation

lmdz1d.F90 @ 5423

Last change on this file since 5423 was 2839, checked in by Laurent Fairhead, 8 years ago
Merged trunk changes r2785:2838 into testing branch
File size: 46.3 KB

Rev	Line
[2239]	1	!#ifdef CPP_1D
	2	!#include "../dyn3d/mod_const_mpi.F90"
	3	!#include "../dyn3d_common/control_mod.F90"
	4	!#include "../dyn3d_common/infotrac.F90"
	5	!#include "../dyn3d_common/disvert.F90"
[2017]	6
	7
[2019]	8	PROGRAM lmdz1d
	9
[2408]	10	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar
	11	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
	12	clwcon, detr_therm, &
	13	qsol, fevap, z0m, z0h, agesno, &
	14	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
	15	falb_dir, falb_dif, &
	16	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
[2435]	17	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
[2641]	18	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
	19	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
	20	wake_deltaq, wake_deltat, wake_s, wake_dens, &
	21	zgam, zmax0, zmea, zpic, zsig, &
[2408]	22	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl
[2720]	23
[2641]	24	USE dimphy
	25	USE surface_data, only : type_ocean,ok_veget
	26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
	27	pbl_surface_final
	28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
[2019]	29
[2641]	30	USE infotrac ! new
	31	USE control_mod
[2408]	32	USE indice_sol_mod
	33	USE phyaqua_mod
[2720]	34	! USE mod_1D_cases_read
	35	USE mod_1D_cases_read2
[2408]	36	USE mod_1D_amma_read
[2594]	37	USE print_control_mod, ONLY: lunout, prt_level
[2408]	38	USE iniphysiq_mod, ONLY: iniphysiq
	39	USE mod_const_mpi, ONLY: comm_lmdz
[2435]	40	USE physiq_mod, ONLY: physiq
[2641]	41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
[2839]	42	preff, aps, bps, pseudoalt, scaleheight
[2641]	43	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
	44	itau_dyn, itau_phy, start_time
[2019]	45
	46	implicit none
	47	#include "dimensions.h"
	48	#include "YOMCST.h"
	49	!!#include "control.h"
	50	#include "clesphys.h"
	51	#include "dimsoil.h"
	52	!#include "indicesol.h"
	53
	54	#include "compar1d.h"
	55	#include "flux_arp.h"
[2408]	56	#include "date_cas.h"
[2019]	57	#include "tsoilnudge.h"
	58	#include "fcg_gcssold.h"
	59	!!!#include "fbforcing.h"
[2594]	60	#include "compbl.h"
[2019]	61
	62	!=====================================================================
	63	! DECLARATIONS
	64	!=====================================================================
	65
	66	!---------------------------------------------------------------------
	67	! Externals
	68	!---------------------------------------------------------------------
	69	external fq_sat
	70	real fq_sat
	71
	72	!---------------------------------------------------------------------
	73	! Arguments d' initialisations de la physique (USER DEFINE)
	74	!---------------------------------------------------------------------
	75
	76	integer, parameter :: ngrid=1
	77	real :: zcufi = 1.
	78	real :: zcvfi = 1.
	79
	80	!- real :: nat_surf
	81	!- logical :: ok_flux_surf
	82	!- real :: fsens
	83	!- real :: flat
	84	!- real :: tsurf
	85	!- real :: rugos
	86	!- real :: qsol(1:2)
	87	!- real :: qsurf
	88	!- real :: psurf
	89	!- real :: zsurf
	90	!- real :: albedo
	91	!-
	92	!- real :: time = 0.
	93	!- real :: time_ini
	94	!- real :: xlat
	95	!- real :: xlon
	96	!- real :: wtsurf
	97	!- real :: wqsurf
	98	!- real :: restart_runoff
	99	!- real :: xagesno
	100	!- real :: qsolinp
	101	!- real :: zpicinp
	102	!-
	103	real :: fnday
	104	real :: day, daytime
	105	real :: day1
	106	real :: heure
	107	integer :: jour
	108	integer :: mois
	109	integer :: an
	110
	111	!---------------------------------------------------------------------
	112	! Declarations related to forcing and initial profiles
	113	!---------------------------------------------------------------------
	114
	115	integer :: kmax = llm
	116	integer llm700,nq1,nq2
	117	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
	118	real timestep, frac
	119	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
	120	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
	121	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
	122	real dqtdxls(nlev_max),dqtdyls(nlev_max)
	123	real dqtdtls(nlev_max),thlpcar(nlev_max)
	124	real qprof(nlev_max,nqmx)
	125
	126	! integer :: forcing_type
	127	logical :: forcing_les = .false.
	128	logical :: forcing_armcu = .false.
	129	logical :: forcing_rico = .false.
	130	logical :: forcing_radconv = .false.
	131	logical :: forcing_toga = .false.
	132	logical :: forcing_twpice = .false.
	133	logical :: forcing_amma = .false.
[2126]	134	logical :: forcing_dice = .false.
[2720]	135	logical :: forcing_gabls4 = .false.
	136
[2019]	137	logical :: forcing_GCM2SCM = .false.
	138	logical :: forcing_GCSSold = .false.
	139	logical :: forcing_sandu = .false.
	140	logical :: forcing_astex = .false.
	141	logical :: forcing_fire = .false.
[2191]	142	logical :: forcing_case = .false.
[2720]	143	logical :: forcing_case2 = .false.
[2019]	144	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
	145	! (cf read_tsurf1d.F)
	146
	147	!vertical advection computation
	148	! real d_t_z(llm), d_q_z(llm)
[2408]	149	! real d_t_dyn_z(llm), dq_dyn_z(llm)
[2019]	150	! real zz(llm)
	151	! real zfact
	152
	153	!flag forcings
	154	logical :: nudge_wind=.true.
	155	logical :: nudge_thermo=.false.
	156	logical :: cptadvw=.true.
	157	!=====================================================================
	158	! DECLARATIONS FOR EACH CASE
	159	!=====================================================================
	160	!
	161	#include "1D_decl_cases.h"
	162	!
	163	!---------------------------------------------------------------------
[2181]	164	! Declarations related to nudging
	165	!---------------------------------------------------------------------
	166	integer :: nudge_max
	167	parameter (nudge_max=9)
	168	integer :: inudge_RHT=1
	169	integer :: inudge_UV=2
	170	logical :: nudge(nudge_max)
	171	real :: t_targ(llm)
	172	real :: rh_targ(llm)
	173	real :: u_targ(llm)
	174	real :: v_targ(llm)
	175	!
	176	!---------------------------------------------------------------------
[2019]	177	! Declarations related to vertical discretization:
	178	!---------------------------------------------------------------------
	179	real :: pzero=1.e5
	180	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
[2720]	181	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
[2019]	182
	183	!---------------------------------------------------------------------
	184	! Declarations related to variables
	185	!---------------------------------------------------------------------
	186
	187	real :: phi(llm)
	188	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
[2408]	189	REAL rot(1, llm) ! relative vorticity, in s-1
[2019]	190	real :: rlat_rad(1),rlon_rad(1)
	191	real :: omega(llm+1),omega2(llm),rho(llm+1)
	192	real :: ug(llm),vg(llm),fcoriolis
	193	real :: sfdt, cfdt
	194	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
	195	real :: dt_dyn(llm)
[2720]	196	real :: dt_cooling(llm),d_t_adv(llm),d_th_adv(llm),d_t_nudge(llm)
[2181]	197	real :: d_u_nudge(llm),d_v_nudge(llm)
[2191]	198	real :: du_adv(llm),dv_adv(llm)
[2408]	199	real :: du_age(llm),dv_age(llm)
[2019]	200	real :: alpha
	201	real :: ttt
	202
	203	REAL, ALLOCATABLE, DIMENSION(:,:):: q
	204	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
	205	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
	206	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
[2181]	207	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
	208	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
[2019]	209
	210	!---------------------------------------------------------------------
	211	! Initialization of surface variables
	212	!---------------------------------------------------------------------
	213	real :: run_off_lic_0(1)
	214	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
	215	real :: tsoil(1,nsoilmx,nbsrf)
[2244]	216	! real :: agesno(1,nbsrf)
[2019]	217
	218	!---------------------------------------------------------------------
	219	! Call to phyredem
	220	!---------------------------------------------------------------------
	221	logical :: ok_writedem =.true.
[2126]	222	real :: sollw_in = 0.
	223	real :: solsw_in = 0.
[2019]	224
	225	!---------------------------------------------------------------------
	226	! Call to physiq
	227	!---------------------------------------------------------------------
	228	logical :: firstcall=.true.
	229	logical :: lastcall=.false.
[2435]	230	real :: phis(1) = 0.0
	231	real :: dpsrf(1)
[2019]	232
	233	!---------------------------------------------------------------------
	234	! Initializations of boundary conditions
	235	!---------------------------------------------------------------------
	236	integer, parameter :: yd = 360
	237	real :: phy_nat (yd) = 0.0 ! 0=ocean libre,1=land,2=glacier,3=banquise
	238	real :: phy_alb (yd) ! Albedo land only (old value condsurf_jyg=0.3)
	239	real :: phy_sst (yd) ! SST (will not be used; cf read_tsurf1d.F)
	240	real :: phy_bil (yd) = 1.0 ! Ne sert que pour les slab_ocean
	241	real :: phy_rug (yd) ! Longueur rugosite utilisee sur land only
	242	real :: phy_ice (yd) = 0.0 ! Fraction de glace
	243	real :: phy_fter(yd) = 0.0 ! Fraction de terre
	244	real :: phy_foce(yd) = 0.0 ! Fraction de ocean
	245	real :: phy_fsic(yd) = 0.0 ! Fraction de glace
	246	real :: phy_flic(yd) = 0.0 ! Fraction de glace
	247
	248	!---------------------------------------------------------------------
	249	! Fichiers et d'autres variables
	250	!---------------------------------------------------------------------
	251	integer :: k,l,i,it=1,mxcalc
[2594]	252	integer :: nsrf
[2181]	253	integer jcode
[2019]	254	INTEGER read_climoz
[2641]	255	!
	256	integer :: it_end ! iteration number of the last call
[2019]	257	!Al1
	258	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
	259	data ecrit_slab_oc/-1/
[2641]	260	!
	261	! if flag_inhib_forcing = 0, tendencies of forcing are added
	262	! <> 0, tendencies of forcing are not added
	263	INTEGER :: flag_inhib_forcing = 0
[2019]	264
	265	!=====================================================================
	266	! INITIALIZATIONS
	267	!=====================================================================
[2408]	268	du_phys(:)=0.
	269	dv_phys(:)=0.
	270	dt_phys(:)=0.
	271	dt_dyn(:)=0.
	272	dt_cooling(:)=0.
	273	d_th_adv(:)=0.
	274	d_t_nudge(:)=0.
	275	d_u_nudge(:)=0.
	276	d_v_nudge(:)=0.
	277	du_adv(:)=0.
	278	dv_adv(:)=0.
	279	du_age(:)=0.
	280	dv_age(:)=0.
	281
[2019]	282	! Initialization of Common turb_forcing
	283	dtime_frcg = 0.
	284	Turb_fcg_gcssold=.false.
	285	hthturb_gcssold = 0.
	286	hqturb_gcssold = 0.
	287
	288	!---------------------------------------------------------------------
	289	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
	290	!---------------------------------------------------------------------
	291	!Al1
	292	call conf_unicol
	293	!Al1 moves this gcssold var from common fcg_gcssold to
	294	Turb_fcg_gcssold = xTurb_fcg_gcssold
	295	! --------------------------------------------------------------------
	296	close(1)
	297	!Al1
	298	write(,) 'lmdz1d.def lu => unicol.def'
	299
	300	! forcing_type defines the way the SCM is forced:
	301	!forcing_type = 0 ==> forcing_les = .true.
	302	! initial profiles from file prof.inp.001
	303	! no forcing by LS convergence ;
	304	! surface temperature imposed ;
	305	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
	306	!forcing_type = 1 ==> forcing_radconv = .true.
	307	! idem forcing_type = 0, but the imposed radiative cooling
	308	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
	309	! then there is no radiative cooling at all)
	310	!forcing_type = 2 ==> forcing_toga = .true.
	311	! initial profiles from TOGA-COARE IFA files
	312	! LS convergence and SST imposed from TOGA-COARE IFA files
	313	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
	314	! initial profiles from the GCM output
	315	! LS convergence imposed from the GCM output
	316	!forcing_type = 4 ==> forcing_twpice = .true.
	317	! initial profiles from TWP-ICE cdf file
	318	! LS convergence, omega and SST imposed from TWP-ICE files
	319	!forcing_type = 5 ==> forcing_rico = .true.
	320	! initial profiles from RICO files
	321	! LS convergence imposed from RICO files
	322	!forcing_type = 6 ==> forcing_amma = .true.
	323	! initial profiles from AMMA nc file
	324	! LS convergence, omega and surface fluxes imposed from AMMA file
[2126]	325	!forcing_type = 7 ==> forcing_dice = .true.
	326	! initial profiles and large scale forcings in dice_driver.nc
	327	! Different stages: soil model alone, atm. model alone
	328	! then both models coupled
[2720]	329	!forcing_type = 8 ==> forcing_gabls4 = .true.
	330	! initial profiles and large scale forcings in gabls4_driver.nc
[2408]	331	!forcing_type >= 100 ==> forcing_case = .true.
[2191]	332	! initial profiles and large scale forcings in cas.nc
	333	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
[2408]	334	! 101=cindynamo
	335	! 102=bomex
[2720]	336	!forcing_type >= 100 ==> forcing_case2 = .true.
	337	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
	338	! 103=arm_cu2 ie arm_cu with new forcing format
	339	! 104=rico2 ie rico with new forcing format
[2019]	340	!forcing_type = 40 ==> forcing_GCSSold = .true.
	341	! initial profile from GCSS file
	342	! LS convergence imposed from GCSS file
	343	!forcing_type = 50 ==> forcing_fire = .true.
	344	! forcing from fire.nc
	345	!forcing_type = 59 ==> forcing_sandu = .true.
	346	! initial profiles from sanduref file: see prof.inp.001
	347	! SST varying with time and divergence constante: see ifa_sanduref.txt file
	348	! Radiation has to be computed interactively
	349	!forcing_type = 60 ==> forcing_astex = .true.
	350	! initial profiles from file: see prof.inp.001
	351	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
	352	! Radiation has to be computed interactively
	353	!forcing_type = 61 ==> forcing_armcu = .true.
	354	! initial profiles from file: see prof.inp.001
	355	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
	356	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
	357	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
	358	! Radiation to be switched off
	359	!
	360	if (forcing_type .eq.0) THEN
	361	forcing_les = .true.
	362	elseif (forcing_type .eq.1) THEN
	363	forcing_radconv = .true.
	364	elseif (forcing_type .eq.2) THEN
	365	forcing_toga = .true.
	366	elseif (forcing_type .eq.3) THEN
	367	forcing_GCM2SCM = .true.
	368	elseif (forcing_type .eq.4) THEN
	369	forcing_twpice = .true.
	370	elseif (forcing_type .eq.5) THEN
	371	forcing_rico = .true.
	372	elseif (forcing_type .eq.6) THEN
	373	forcing_amma = .true.
[2126]	374	elseif (forcing_type .eq.7) THEN
	375	forcing_dice = .true.
[2720]	376	elseif (forcing_type .eq.8) THEN
	377	forcing_gabls4 = .true.
[2408]	378	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
[2191]	379	forcing_case = .true.
[2408]	380	year_ini_cas=2011
	381	mth_ini_cas=10
	382	day_deb=1
	383	heure_ini_cas=0.
	384	pdt_cas=3*3600. ! forcing frequency
	385	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
	386	forcing_case = .true.
	387	year_ini_cas=1969
	388	mth_ini_cas=6
	389	day_deb=24
	390	heure_ini_cas=0.
	391	pdt_cas=1800. ! forcing frequency
[2720]	392	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
	393	forcing_case2 = .true.
	394	year_ini_cas=1997
	395	mth_ini_cas=6
	396	day_deb=21
	397	heure_ini_cas=11.5
	398	pdt_cas=1800. ! forcing frequency
	399	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
	400	forcing_case2 = .true.
	401	year_ini_cas=2004
	402	mth_ini_cas=12
	403	day_deb=16
	404	heure_ini_cas=0.
	405	pdt_cas=1800. ! forcing frequency
[2019]	406	elseif (forcing_type .eq.40) THEN
	407	forcing_GCSSold = .true.
	408	elseif (forcing_type .eq.50) THEN
	409	forcing_fire = .true.
	410	elseif (forcing_type .eq.59) THEN
	411	forcing_sandu = .true.
	412	elseif (forcing_type .eq.60) THEN
	413	forcing_astex = .true.
	414	elseif (forcing_type .eq.61) THEN
	415	forcing_armcu = .true.
	416	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
	417	else
	418	write (,) 'ERROR : unknown forcing_type ', forcing_type
	419	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
	420	ENDIF
	421	print*,"forcing type=",forcing_type
	422
	423	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
	424	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
	425	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
	426	! through the common sst_forcing.
	427
	428	type_ts_forcing = 0
[2126]	429	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
[2019]	430	& type_ts_forcing = 1
[2181]	431	!
	432	! Initialization of the logical switch for nudging
	433	jcode = iflag_nudge
	434	do i = 1,nudge_max
	435	nudge(i) = mod(jcode,10) .ge. 1
	436	jcode = jcode/10
	437	enddo
[2019]	438	!---------------------------------------------------------------------
	439	! Definition of the run
	440	!---------------------------------------------------------------------
	441
[2221]	442	call conf_gcm( 99, .TRUE. )
[2019]	443	!-----------------------------------------------------------------------
	444	! Choix du calendrier
	445	! -------------------
	446
	447	! calend = 'earth_365d'
	448	if (calend == 'earth_360d') then
	449	call ioconf_calendar('360d')
	450	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
	451	else if (calend == 'earth_365d') then
	452	call ioconf_calendar('noleap')
	453	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
	454	else if (calend == 'earth_366d') then
	455	call ioconf_calendar('all_leap')
	456	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
	457	else if (calend == 'gregorian') then
	458	call ioconf_calendar('gregorian') ! not to be used by normal users
	459	write(,)'CALENDRIER CHOISI: Gregorien'
	460	else
	461	write (,) 'ERROR : unknown calendar ', calend
	462	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
	463	endif
	464	!-----------------------------------------------------------------------
	465	!
	466	!c Date :
	467	! La date est supposee donnee sous la forme [annee, numero du jour dans
	468	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
	469	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
	470	! Le numero du jour est dans "day". L heure est traitee separement.
	471	! La date complete est dans "daytime" (l'unite est le jour).
	472	if (nday>0) then
	473	fnday=nday
	474	else
	475	fnday=-nday/float(day_step)
	476	endif
[2408]	477	print *,'fnday=',fnday
[2720]	478	! start_time doit etre en FRACTION DE JOUR
[2488]	479	start_time=time_ini/24.
	480
[2019]	481	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
	482	IF(forcing_type .EQ. 61) fnday=53100./86400.
[2720]	483	IF(forcing_type .EQ. 103) fnday=53100./86400.
[2019]	484	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
	485	IF(forcing_type .EQ. 6) fnday=64800./86400.
[2126]	486	! IF(forcing_type .EQ. 6) fnday=50400./86400.
[2720]	487	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
[2019]	488	annee_ref = anneeref
	489	mois = 1
	490	day_ref = dayref
	491	heure = 0.
	492	itau_dyn = 0
	493	itau_phy = 0
	494	call ymds2ju(annee_ref,mois,day_ref,heure,day)
	495	day_ini = int(day)
	496	day_end = day_ini + fnday
	497
	498	IF (forcing_type .eq.2) THEN
	499	! Convert the initial date of Toga-Coare to Julian day
	500	call ymds2ju &
	501	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
	502
	503	ELSEIF (forcing_type .eq.4) THEN
	504	! Convert the initial date of TWPICE to Julian day
	505	call ymds2ju &
	506	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
	507	& ,day_ju_ini_twpi)
	508	ELSEIF (forcing_type .eq.6) THEN
	509	! Convert the initial date of AMMA to Julian day
	510	call ymds2ju &
	511	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
	512	& ,day_ju_ini_amma)
[2126]	513	ELSEIF (forcing_type .eq.7) THEN
	514	! Convert the initial date of DICE to Julian day
	515	call ymds2ju &
	516	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
	517	& ,day_ju_ini_dice)
[2720]	518	ELSEIF (forcing_type .eq.8 ) THEN
	519	! Convert the initial date of GABLS4 to Julian day
	520	call ymds2ju &
	521	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
	522	& ,day_ju_ini_gabls4)
[2408]	523	ELSEIF (forcing_type .gt.100) THEN
[2191]	524	! Convert the initial date to Julian day
[2408]	525	day_ini_cas=day_deb
	526	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
[2191]	527	call ymds2ju &
[2720]	528	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
[2191]	529	& ,day_ju_ini_cas)
[2408]	530	print*,'time case 2',day_ini_cas,day_ju_ini_cas
[2019]	531	ELSEIF (forcing_type .eq.59) THEN
	532	! Convert the initial date of Sandu case to Julian day
	533	call ymds2ju &
	534	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
	535	& time_ini*3600.,day_ju_ini_sandu)
	536
	537	ELSEIF (forcing_type .eq.60) THEN
	538	! Convert the initial date of Astex case to Julian day
	539	call ymds2ju &
	540	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
	541	& time_ini*3600.,day_ju_ini_astex)
	542
	543	ELSEIF (forcing_type .eq.61) THEN
	544	! Convert the initial date of Arm_cu case to Julian day
	545	call ymds2ju &
	546	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
	547	& ,day_ju_ini_armcu)
	548	ENDIF
	549
[2720]	550	IF (forcing_type .gt.100) THEN
	551	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
	552	ELSE
[2019]	553	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
[2720]	554	ENDIF
[2019]	555	! Print out the actual date of the beginning of the simulation :
	556	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
	557	print *,' Time of beginning : ', &
	558	& year_print, month_print, day_print, sec_print
	559
	560	!---------------------------------------------------------------------
	561	! Initialization of dimensions, geometry and initial state
	562	!---------------------------------------------------------------------
[2408]	563	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
	564	! but we still need to initialize dimphy module (klon,klev,etc.) here.
	565	call init_dimphy(1,llm)
[2019]	566	call suphel
	567	call infotrac_init
	568
	569	if (nqtot>nqmx) STOP'Augmenter nqmx dans lmdz1d.F'
	570	allocate(q(llm,nqtot)) ; q(:,:)=0.
	571	allocate(dq(llm,nqtot))
	572	allocate(dq_dyn(llm,nqtot))
	573	allocate(d_q_adv(llm,nqtot))
[2181]	574	allocate(d_q_nudge(llm,nqtot))
	575	! allocate(d_th_adv(llm))
[2019]	576
[2408]	577	q(:,:) = 0.
	578	dq(:,:) = 0.
	579	dq_dyn(:,:) = 0.
	580	d_q_adv(:,:) = 0.
	581	d_q_nudge(:,:) = 0.
	582
[2019]	583	!
	584	! No ozone climatology need be read in this pre-initialization
	585	! (phys_state_var_init is called again in physiq)
	586	read_climoz = 0
	587	!
	588	call phys_state_var_init(read_climoz)
	589
	590	if (ngrid.ne.klon) then
	591	print*,'stop in inifis'
	592	print*,'Probleme de dimensions :'
	593	print*,'ngrid = ',ngrid
	594	print*,'klon = ',klon
	595	stop
	596	endif
	597	!!!=====================================================================
	598	!!! Feedback forcing values for Gateaux differentiation (al1)
	599	!!!=====================================================================
	600	!!! Surface Planck forcing bracketing call radiation
	601	!! surf_Planck = 0.
	602	!! surf_Conv = 0.
	603	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
	604	!!! a mettre dans le lmdz1d.def ou autre
	605	!!
	606	!!
	607	qsol = qsolinp
	608	qsurf = fq_sat(tsurf,psurf/100.)
	609	day1= day_ini
	610	time=daytime-day
	611	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
	612	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
	613
	614	!
	615	!! mpl et jyg le 22/08/2012 :
	616	!! pour que les cas a flux de surface imposes marchent
	617	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
	618	fsens=-wtsurfrcpdrho(1)
	619	flat=-wqsurfrlvttrho(1)
	620	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
	621	ENDIF
	622	print*,'Flux sol ',fsens,flat
	623	!! ok_flux_surf=.false.
	624	!! fsens=-wtsurfrcpdrho(1)
	625	!! flat=-wqsurfrlvttrho(1)
	626	!!!!
	627
	628	! Vertical discretization and pressure levels at half and mid levels:
	629
	630	pa = 5e4
	631	!! preff= 1.01325e5
	632	preff = psurf
	633	IF (ok_old_disvert) THEN
	634	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
	635	print *,'On utilise disvert0'
[2839]	636	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
	637	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
	638	scaleheight=8.
	639	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
[2019]	640	ELSE
[2040]	641	call disvert()
[2019]	642	print *,'On utilise disvert'
	643	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
	644	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
	645	ENDIF
[2839]	646
[2019]	647	sig_s=presnivs/preff
	648	plev =ap+bp*psurf
	649	play = 0.5*(plev(1:llm)+plev(2:llm+1))
[2408]	650	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
[2019]	651
	652	IF (forcing_type .eq. 59) THEN
	653	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
	654	write(,) '***********************'
	655	do l = 1, llm
	656	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
	657	if (trouve_700 .and. play(l).le.70000) then
	658	llm700=l
	659	print *,'llm700,play=',llm700,play(l)/100.
	660	trouve_700= .false.
	661	endif
	662	enddo
	663	write(,) '***********************'
	664	ENDIF
	665
	666	!
	667	!=====================================================================
	668	! EVENTUALLY, READ FORCING DATA :
	669	!=====================================================================
	670
	671	#include "1D_read_forc_cases.h"
	672
	673	if (forcing_GCM2SCM) then
	674	write (,) 'forcing_GCM2SCM not yet implemented'
	675	stop 'in initialization'
	676	endif ! forcing_GCM2SCM
	677
	678	print*,'mxcalc=',mxcalc
[2408]	679	! print*,'zlay=',zlay(mxcalc)
[2019]	680	print*,'play=',play(mxcalc)
	681
[2408]	682	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
[2019]	683	ts_cur = tsurf ! SST used in read_tsurf1d
	684	!=====================================================================
	685	! Initialisation de la physique :
	686	!=====================================================================
	687
	688	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
	689	!
	690	! day_step, iphysiq lus dans gcm.def ci-dessus
	691	! timestep: calcule ci-dessous from rday et day_step
	692	! ngrid=1
	693	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
	694	! rday: defini dans suphel.F (86400.)
	695	! day_ini: lu dans run.def (dayref)
	696	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
	697	! airefi,zcufi,zcvfi initialises au debut de ce programme
	698	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
	699	day_step = float(nsplit_phys)*day_step/float(iphysiq)
	700	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
	701	timestep =rday/day_step
	702	dtime_frcg = timestep
	703	!
	704	zcufi=airefi
	705	zcvfi=airefi
	706	!
[2435]	707	rlat_rad(1)=xlat*rpi/180.
	708	rlon_rad(1)=xlon*rpi/180.
[2019]	709
[2408]	710	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
	711	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
	712	! with '0.' when necessary
	713	call iniphysiq(iim,jjm,llm, &
	714	1,comm_lmdz, &
	715	rday,day_ini,timestep, &
	716	(/rlat_rad(1),0./),(/0./), &
	717	(/0.,0./),(/rlon_rad(1),0./), &
	718	(/ (/airefi,0./),(/0.,0./) /), &
	719	(/zcufi,0.,0.,0./), &
	720	(/zcvfi,0./), &
	721	ra,rg,rd,rcpd,1)
[2019]	722	print*,'apres iniphysiq'
	723
	724	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
	725	co2_ppm= 330.0
	726	solaire=1370.0
	727
	728	! Ecriture du startphy avant le premier appel a la physique.
	729	! On le met juste avant pour avoir acces a tous les champs
	730
	731	if (ok_writedem) then
	732
	733	!--------------------------------------------------------------------------
	734	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
	735	! need : qsol fder snow qsurf evap rugos agesno ftsoil
	736	!--------------------------------------------------------------------------
	737
	738	type_ocean = "force"
	739	run_off_lic_0(1) = restart_runoff
	740	call fonte_neige_init(run_off_lic_0)
	741
	742	fder=0.
[2720]	743	snsrf(1,:)=snowmass ! masse de neige des sous surface
[2019]	744	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
[2244]	745	fevap=0.
	746	z0m(1,:)=rugos ! couverture de neige des sous surface
[2720]	747	z0h(1,:)=rugosh ! couverture de neige des sous surface
[2019]	748	agesno = xagesno
	749	tsoil(:,:,:)=tsurf
	750	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
	751	! tsoil(1,1,1)=299.18
	752	! tsoil(1,2,1)=300.08
	753	! tsoil(1,3,1)=301.88
	754	! tsoil(1,4,1)=305.48
	755	! tsoil(1,5,1)=308.00
	756	! tsoil(1,6,1)=308.00
	757	! tsoil(1,7,1)=308.00
	758	! tsoil(1,8,1)=308.00
	759	! tsoil(1,9,1)=308.00
	760	! tsoil(1,10,1)=308.00
	761	! tsoil(1,11,1)=308.00
	762	!-----------------------------------------------------------------------
[2244]	763	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
[2019]	764
	765	!------------------ prepare limit conditions for limit.nc -----------------
	766	!-- Ocean force
	767
	768	print*,'avant phyredem'
	769	pctsrf(1,:)=0.
[2720]	770	if (nat_surf.eq.0.) then
[2019]	771	pctsrf(1,is_oce)=1.
	772	pctsrf(1,is_ter)=0.
[2720]	773	pctsrf(1,is_lic)=0.
	774	pctsrf(1,is_sic)=0.
	775	else if (nat_surf .eq. 1) then
[2019]	776	pctsrf(1,is_oce)=0.
	777	pctsrf(1,is_ter)=1.
[2720]	778	pctsrf(1,is_lic)=0.
	779	pctsrf(1,is_sic)=0.
	780	else if (nat_surf .eq. 2) then
	781	pctsrf(1,is_oce)=0.
	782	pctsrf(1,is_ter)=0.
	783	pctsrf(1,is_lic)=1.
	784	pctsrf(1,is_sic)=0.
	785	else if (nat_surf .eq. 3) then
	786	pctsrf(1,is_oce)=0.
	787	pctsrf(1,is_ter)=0.
	788	pctsrf(1,is_lic)=0.
	789	pctsrf(1,is_sic)=1.
[2019]	790
[2720]	791	end if
	792
	793
[2019]	794	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
	795	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
	796
	797	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
	798	zpic = zpicinp
	799	ftsol=tsurf
[2237]	800	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
	801	! 6 albedo, mais on peut quand meme tourner avec
	802	! moins. Seules les 2 ou 4 premiers seront lus
	803	falb_dir=albedo
	804	falb_dif=albedo
[2019]	805	rugoro=rugos
	806	t_ancien(1,:)=temp(:)
	807	q_ancien(1,:)=q(:,1)
[2594]	808	!jyg<
	809	!! pbl_tke(:,:,:)=1.e-8
	810	pbl_tke(:,:,:)=0.
	811	pbl_tke(:,2,:)=1.e-2
	812	PRINT *, ' pbl_tke dans lmdz1d '
[2641]	813	if (prt_level .ge. 5) then
	814	DO nsrf = 1,4
	815	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
	816	ENDDO
	817	end if
[2019]	818
[2594]	819	!>jyg
	820
[2019]	821	rain_fall=0.
	822	snow_fall=0.
	823	solsw=0.
	824	sollw=0.
[2408]	825	sollwdown=rsigmatsurf*4
[2019]	826	radsol=0.
	827	rnebcon=0.
	828	ratqs=0.
	829	clwcon=0.
[2408]	830	zmax0 = 0.
[2019]	831	zmea=0.
	832	zstd=0.
	833	zsig=0.
	834	zgam=0.
	835	zval=0.
	836	zthe=0.
	837	sig1=0.
	838	w01=0.
[2408]	839	wake_cstar = 0.
	840	wake_deltaq = 0.
	841	wake_deltat = 0.
[2594]	842	wake_delta_pbl_TKE(:,:,:) = 0.
[2408]	843	delta_tsurf = 0.
	844	wake_fip = 0.
	845	wake_pe = 0.
	846	wake_s = 0.
[2641]	847	wake_dens = 0.
[2408]	848	ale_bl = 0.
	849	ale_bl_trig = 0.
	850	alp_bl = 0.
	851	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
	852	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
	853	entr_therm = 0.
	854	detr_therm = 0.
	855	f0 = 0.
	856	fm_therm = 0.
[2019]	857	u_ancien(1,:)=u(:)
	858	v_ancien(1,:)=v(:)
	859
	860	!------------------------------------------------------------------------
	861	! Make file containing restart for the physics (startphy.nc)
	862	!
	863	! NB: List of the variables to be written by phyredem (via put_field):
	864	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
	865	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
[2243]	866	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
[2408]	867	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
[2019]	868	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
[2255]	869	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
	870	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
[2641]	871	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
	872	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
[2594]	873	!
	874	! NB2: The content of the startphy.nc file depends on some flags defined in
	875	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
	876	! to be set at some arbitratry convenient values.
[2019]	877	!------------------------------------------------------------------------
	878	!Al1 =============== restart option ==========================
	879	if (.not.restart) then
[2594]	880	iflag_pbl = 5
[2019]	881	call phyredem ("startphy.nc")
	882	else
	883	! (desallocations)
	884	print*,'callin surf final'
[2243]	885	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
[2019]	886	print*,'after surf final'
	887	CALL fonte_neige_final(run_off_lic_0)
	888	endif
	889
	890	ok_writedem=.false.
	891	print*,'apres phyredem'
	892
	893	endif ! ok_writedem
	894
	895	!------------------------------------------------------------------------
	896	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
	897	! --------------------------------------------------
	898	! NB: List of the variables to be written in limit.nc
	899	! (by writelim.F, subroutine of 1DUTILS.h):
	900	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
	901	! phy_fter,phy_foce,phy_flic,phy_fsic)
	902	!------------------------------------------------------------------------
	903	do i=1,yd
	904	phy_nat(i) = nat_surf
	905	phy_alb(i) = albedo
	906	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
	907	phy_rug(i) = rugos
	908	phy_fter(i) = pctsrf(1,is_ter)
	909	phy_foce(i) = pctsrf(1,is_oce)
	910	phy_fsic(i) = pctsrf(1,is_sic)
	911	phy_flic(i) = pctsrf(1,is_lic)
	912	enddo
	913
	914	! fabrication de limit.nc
	915	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
	916	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
	917
	918
	919	call phys_state_var_end
	920	!Al1
	921	if (restart) then
	922	print*,'call to restart dyn 1d'
	923	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
	924	& u,v,temp,q,omega2)
	925
	926	print*,'fnday,annee_ref,day_ref,day_ini', &
	927	& fnday,annee_ref,day_ref,day_ini
	928	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
	929	day = day_ini
	930	day_end = day_ini + nday
	931	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
	932
	933	! Print out the actual date of the beginning of the simulation :
	934	call ju2ymds(daytime, an, mois, jour, heure)
	935	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
	936
	937	day = int(daytime)
	938	time=daytime-day
	939
	940	print,'*** intialised fields from restart1dyn *****'
	941	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
	942	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
	943	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
	944	! raz for safety
	945	do l=1,llm
	946	dq_dyn(l,1) = 0.
	947	enddo
	948	endif
	949	!Al1 ================ end restart =================================
	950	IF (ecrit_slab_oc.eq.1) then
	951	open(97,file='div_slab.dat',STATUS='UNKNOWN')
	952	elseif (ecrit_slab_oc.eq.0) then
	953	open(97,file='div_slab.dat',STATUS='OLD')
	954	endif
[2181]	955	!
	956	!---------------------------------------------------------------------
	957	! Initialize target profile for RHT nudging if needed
	958	!---------------------------------------------------------------------
	959	if (nudge(inudge_RHT)) then
	960	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
	961	endif
	962	if (nudge(inudge_UV)) then
	963	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
	964	endif
	965	!
[2019]	966	!=====================================================================
	967	! START OF THE TEMPORAL LOOP :
	968	!=====================================================================
	969
[2641]	970	it_end = nint(fnday*day_step)
	971	!test JLD it_end = 10
	972	do while(it.le.it_end)
[2019]	973
	974	if (prt_level.ge.1) then
	975	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
[2641]	976	& it,day,time,it_end,day_step
[2019]	977	print*,'PAS DE TEMPS ',timestep
	978	endif
	979	!Al1 demande de restartphy.nc
[2641]	980	if (it.eq.it_end) lastcall=.True.
[2019]	981
	982	!---------------------------------------------------------------------
	983	! Interpolation of forcings in time and onto model levels
	984	!---------------------------------------------------------------------
	985
	986	#include "1D_interp_cases.h"
	987
	988	if (forcing_GCM2SCM) then
	989	write (,) 'forcing_GCM2SCM not yet implemented'
	990	stop 'in time loop'
	991	endif ! forcing_GCM2SCM
	992
	993	!---------------------------------------------------------------------
	994	! Geopotential :
	995	!---------------------------------------------------------------------
	996
	997	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
	998	do l = 1, llm-1
	999	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
	1000	& (play(l)-play(l+1))/(play(l)+play(l+1))
	1001	enddo
	1002
	1003	!---------------------------------------------------------------------
	1004	! Listing output for debug prt_level>=1
	1005	!---------------------------------------------------------------------
	1006	if (prt_level>=1) then
	1007	print *,' avant physiq : -------- day time ',day,time
	1008	write(,) 'firstcall,lastcall,phis', &
	1009	& firstcall,lastcall,phis
[2641]	1010	end if
	1011	if (prt_level>=5) then
[2019]	1012	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
	1013	& 'presniv','plev','play','phi'
	1014	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
	1015	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1016	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
	1017	& 'presniv','u','v','temp','q1','q2','omega2'
	1018	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
	1019	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1020	endif
	1021
	1022	!---------------------------------------------------------------------
	1023	! Call physiq :
	1024	!---------------------------------------------------------------------
[2408]	1025	call physiq(ngrid,llm, &
[2641]	1026	firstcall,lastcall,timestep, &
	1027	plev,play,phi,phis,presnivs, &
	1028	u,v, rot, temp,q,omega2, &
	1029	du_phys,dv_phys,dt_phys,dq,dpsrf)
	1030	firstcall=.false.
[2019]	1031
	1032	!---------------------------------------------------------------------
[2641]	1033	! Listing output for debug
[2019]	1034	!---------------------------------------------------------------------
[2641]	1035	if (prt_level>=5) then
[2019]	1036	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
	1037	& 'presniv','plev','play','phi'
	1038	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
	1039	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
	1040	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
	1041	& 'presniv','u','v','temp','q1','q2','omega2'
	1042	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
	1043	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
	1044	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
	1045	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
	1046	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
	1047	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
	1048	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
	1049	write(,) 'dpsrf',dpsrf
	1050	endif
	1051	!---------------------------------------------------------------------
	1052	! Add physical tendencies :
	1053	!---------------------------------------------------------------------
	1054
	1055	fcoriolis=2.sin(rpixlat/180.)*romega
	1056	if (forcing_radconv .or. forcing_fire) then
	1057	fcoriolis=0.0
	1058	dt_cooling=0.0
	1059	d_th_adv=0.0
	1060	d_q_adv=0.0
	1061	endif
[2408]	1062	! print*, 'calcul de fcoriolis ', fcoriolis
[2019]	1063
	1064	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
[2720]	1065	& .or.forcing_amma .or. forcing_type.eq.101) then
[2019]	1066	fcoriolis=0.0 ; ug=0. ; vg=0.
	1067	endif
[2720]	1068
	1069	if(forcing_rico) then
[2019]	1070	dt_cooling=0.
[2720]	1071	endif
[2019]	1072
[2641]	1073	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
[2408]	1074	fcoriolis, xlat,mxcalc
[2019]	1075
[2408]	1076	du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
[2019]	1077	dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
[2408]	1078	! print *,'u-ug=',u-ug
[2019]	1079
	1080	!!!!!!!!!!!!!!!!!!!!!!!!
	1081	! Geostrophic wind
	1082	!!!!!!!!!!!!!!!!!!!!!!!!
	1083	sfdt = sin(0.5fcoriolistimestep)
	1084	cfdt = cos(0.5fcoriolistimestep)
[2408]	1085	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
[2019]	1086	!
	1087	du_age(1:mxcalc)= -2.sfdt/timestep &
	1088	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
	1089	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1090	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
	1091	!
	1092	dv_age(1:mxcalc)= -2.sfdt/timestep &
	1093	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
	1094	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
	1095	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
	1096	!
[2181]	1097	!!!!!!!!!!!!!!!!!!!!!!!!
	1098	! Nudging
	1099	!!!!!!!!!!!!!!!!!!!!!!!!
	1100	d_t_nudge(:) = 0.
	1101	d_q_nudge(:,:) = 0.
	1102	d_u_nudge(:) = 0.
	1103	d_v_nudge(:) = 0.
	1104	if (nudge(inudge_RHT)) then
	1105	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
	1106	& d_t_nudge,d_q_nudge(:,1))
	1107	endif
	1108	if (nudge(inudge_UV)) then
	1109	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
	1110	& d_u_nudge,d_v_nudge)
	1111	endif
	1112	!
[2019]	1113	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1114	! call writefield_phy('dv_age' ,dv_age,llm)
	1115	! call writefield_phy('du_age' ,du_age,llm)
	1116	! call writefield_phy('du_phys' ,du_phys,llm)
	1117	! call writefield_phy('u_tend' ,u,llm)
	1118	! call writefield_phy('u_g' ,ug,llm)
	1119	!
	1120	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1121	!! Increment state variables
	1122	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2641]	1123	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
	1124
[2019]	1125	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
	1126	! au dessus de 700hpa, on relaxe vers les profils initiaux
	1127	if (forcing_sandu .OR. forcing_astex) then
	1128	#include "1D_nudge_sandu_astex.h"
	1129	else
	1130	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
	1131	& du_phys(1:mxcalc) &
[2191]	1132	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
[2181]	1133	& +d_u_nudge(1:mxcalc) )
[2019]	1134	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
	1135	& dv_phys(1:mxcalc) &
[2191]	1136	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
[2181]	1137	& +d_v_nudge(1:mxcalc) )
[2019]	1138	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
	1139	& dq(1:mxcalc,:) &
[2181]	1140	& +d_q_adv(1:mxcalc,:) &
	1141	& +d_q_nudge(1:mxcalc,:) )
[2019]	1142
[2641]	1143	if (prt_level.ge.3) then
[2019]	1144	print *, &
	1145	& 'physiq-> temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1) ', &
	1146	& temp(1),dt_phys(1),d_th_adv(1),dt_cooling(1)
[2408]	1147	print* ,'dv_phys=',dv_phys
	1148	print* ,'dv_age=',dv_age
	1149	print* ,'dv_adv=',dv_adv
	1150	print* ,'d_v_nudge=',d_v_nudge
[2019]	1151	print*, v
	1152	print*, vg
	1153	endif
	1154
	1155	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
	1156	& dt_phys(1:mxcalc) &
	1157	& +d_th_adv(1:mxcalc) &
[2181]	1158	& +d_t_nudge(1:mxcalc) &
[2019]	1159	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
	1160
	1161	endif ! forcing_sandu or forcing_astex
	1162
	1163	teta=temp(pzero/play)*rkappa
	1164	!
	1165	!---------------------------------------------------------------------
	1166	! Nudge soil temperature if requested
	1167	!---------------------------------------------------------------------
	1168
[2594]	1169	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
[2019]	1170	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
	1171	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
	1172	ENDIF
	1173
	1174	!---------------------------------------------------------------------
	1175	! Add large-scale tendencies (advection, etc) :
	1176	!---------------------------------------------------------------------
	1177
	1178	!cc nrlmd
	1179	!cc tmpvar=teta
	1180	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1181	!cc
	1182	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
	1183	!cc tmpvar(:)=q(:,1)
	1184	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1185	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
	1186	!cc tmpvar(:)=q(:,2)
	1187	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
	1188	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
	1189
[2641]	1190	END IF ! end if tendency of tendency should be added
	1191
[2019]	1192	!---------------------------------------------------------------------
	1193	! Air temperature :
	1194	!---------------------------------------------------------------------
	1195	if (lastcall) then
	1196	print*,'Pas de temps final ',it
	1197	call ju2ymds(daytime, an, mois, jour, heure)
	1198	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
	1199	endif
	1200
	1201	! incremente day time
	1202	! print*,'daytime bef',daytime,1./day_step
	1203	daytime = daytime+1./day_step
	1204	!Al1dbg
	1205	day = int(daytime+0.1/day_step)
	1206	! time = max(daytime-day,0.0)
	1207	!Al1&jyg: correction de bug
	1208	!cc time = real(mod(it,day_step))/day_step
	1209	time = time_ini/24.+real(mod(it,day_step))/day_step
	1210	! print*,'daytime nxt time',daytime,time
	1211	it=it+1
	1212
	1213	enddo
	1214
	1215	!Al1
	1216	if (ecrit_slab_oc.ne.-1) close(97)
	1217
	1218	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
	1219	! -------------------------------------
	1220	call dyn1dredem("restart1dyn.nc", &
	1221	& plev,play,phi,phis,presnivs, &
	1222	& u,v,temp,q,omega2)
	1223
	1224	CALL abort_gcm ('lmdz1d ','The End ',0)
	1225
	1226	end
	1227
	1228	#include "1DUTILS.h"
	1229	#include "1Dconv.h"
	1230
[2239]	1231	!#endif
[2019]	1232
[2720]	1233

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format