Context Navigation

1DUTILS.h_no_writelim @ 1665

Last change on this file since 1665 was 1665, checked in by Laurent Fairhead, 12 years ago

Version testing basée sur la r1628

http://lmdz.lmd.jussieu.fr/utilisateurs/distribution-du-modele/versions-intermediaires

Testing release based on r1628

File size: 75.6 KB

Line
1	!
2	! $Id: conf_unicol.F 1279 2010-08-04 17:20:56Z lahellec $
3	!
4	c
5	c
6	SUBROUTINE conf_unicol( tapedef )
7	c
8	#ifdef CPP_IOIPSL
9	use IOIPSL
10	#else
11	! if not using IOIPSL, we still need to use (a local version of) getin
12	use ioipsl_getincom
13	#endif
14	IMPLICIT NONE
15	c-----------------------------------------------------------------------
16	c Auteurs : A. Lahellec .
17	c
18	c Arguments :
19	c
20	c tapedef :
21
22	INTEGER tapedef
23	c
24	c Declarations :
25	c --------------
26
27	#include "compar1d.h"
28	#include "flux_arp.h"
29	#include "fcg_gcssold.h"
30	#include "fcg_racmo.h"
31	#include "iniprint.h"
32	c
33	c
34	c local:
35	c ------
36
37	c CHARACTER ch172,ch272,ch372,ch412
38
39	c
40	c -------------------------------------------------------------------
41	c
42	c ......... Initilisation parametres du lmdz1D ..........
43	c
44	c---------------------------------------------------------------------
45	c initialisations:
46	c ----------------
47
48	!Config Key = lunout
49	!Config Desc = unite de fichier pour les impressions
50	!Config Def = 6
51	!Config Help = unite de fichier pour les impressions
52	!Config (defaut sortie standard = 6)
53	lunout=6
54	CALL getin('lunout', lunout)
55	IF (lunout /= 5 .and. lunout /= 6) THEN
56	OPEN(lunout,FILE='lmdz.out')
57	ENDIF
58
59	!Config Key = prt_level
60	!Config Desc = niveau d'impressions de débogage
61	!Config Def = 0
62	!Config Help = Niveau d'impression pour le débogage
63	!Config (0 = minimum d'impression)
64	c prt_level = 0
65	c CALL getin('prt_level',prt_level)
66
67	c-----------------------------------------------------------------------
68	c Parametres de controle du run:
69	c-----------------------------------------------------------------------
70
71	!Config Key = restart
72	!Config Desc = on repart des startphy et start1dyn
73	!Config Def = false
74	!Config Help = les fichiers restart doivent etre renomme en start
75	restart = .FALSE.
76	CALL getin('restart',restart)
77
78	!Config Key = forcing_type
79	!Config Desc = defines the way the SCM is forced:
80	!Config Def = 0
81	!!Config Help = 0 ==> forcing_les = .true.
82	! initial profiles from file prof.inp.001
83	! no forcing by LS convergence ;
84	! surface temperature imposed ;
85	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
86	! = 1 ==> forcing_radconv = .true.
87	! idem forcing_type = 0, but the imposed radiative cooling
88	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
89	! then there is no radiative cooling at all)
90	! = 2 ==> forcing_toga = .true.
91	! initial profiles from TOGA-COARE IFA files
92	! LS convergence and SST imposed from TOGA-COARE IFA files
93	! = 3 ==> forcing_GCM2SCM = .true.
94	! initial profiles from the GCM output
95	! LS convergence imposed from the GCM output
96	! = 4 ==> forcing_twpi = .true.
97	! initial profiles from TWPICE nc files
98	! LS convergence and SST imposed from TWPICE nc files
99	! = 5 ==> forcing_rico = .true.
100	! initial profiles from RICO idealized
101	! LS convergence imposed from RICO (cst)
102	! = 40 ==> forcing_GCSSold = .true.
103	! initial profile from GCSS file
104	! LS convergence imposed from GCSS file
105	!
106	forcing_type = 0
107	CALL getin('forcing_type',forcing_type)
108	imp_fcg_gcssold = .false.
109	ts_fcg_gcssold = .false.
110	Tp_fcg_gcssold = .false.
111	Tp_ini_gcssold = .false.
112	xTurb_fcg_gcssold = .false.
113	IF (forcing_type .eq.40) THEN
114	CALL getin('imp_fcg',imp_fcg_gcssold)
115	CALL getin('ts_fcg',ts_fcg_gcssold)
116	CALL getin('tp_fcg',Tp_fcg_gcssold)
117	CALL getin('tp_ini',Tp_ini_gcssold)
118	CALL getin('turb_fcg',xTurb_fcg_gcssold)
119	ENDIF
120
121	!Config Key = ok_flux_surf
122	!Config Desc = forcage ou non par les flux de surface
123	!Config Def = false
124	!Config Help = forcage ou non par les flux de surface
125	ok_flux_surf = .FALSE.
126	CALL getin('ok_flux_surf',ok_flux_surf)
127
128	!Config Key = time_ini
129	!Config Desc = meaningless in this case
130	!Config Def = 0.
131	!Config Help =
132	tsurf = 0.
133	CALL getin('time_ini',time_ini)
134
135	!Config Key = rlat et rlon
136	!Config Desc = latitude et longitude
137	!Config Def = 0.0 0.0
138	!Config Help = fixe la position de la colonne
139	xlat = 0.
140	xlon = 0.
141	CALL getin('rlat',xlat)
142	CALL getin('rlon',xlon)
143
144	!Config Key = airephy
145	!Config Desc = Grid cell area
146	!Config Def = 1.e11
147	!Config Help =
148	airefi = 1.e11
149	CALL getin('airephy',airefi)
150
151	!Config Key = nat_surf
152	!Config Desc = surface type
153	!Config Def = 0 (ocean)
154	!Config Help = 0=ocean,1=land,2=glacier,3=banquise
155	nat_surf = 0.
156	CALL getin('nat_surf',nat_surf)
157
158	!Config Key = tsurf
159	!Config Desc = surface temperature
160	!Config Def = 290.
161	!Config Help = not used if type_ts_forcing=1 in lmdz1d.F
162	tsurf = 290.
163	CALL getin('tsurf',tsurf)
164
165	!Config Key = psurf
166	!Config Desc = surface pressure
167	!Config Def = 102400.
168	!Config Help =
169	psurf = 102400.
170	CALL getin('psurf',psurf)
171
172	!Config Key = zsurf
173	!Config Desc = surface altitude
174	!Config Def = 0.
175	!Config Help =
176	zsurf = 0.
177	CALL getin('zsurf',zsurf)
178
179	!Config Key = rugos
180	!Config Desc = coefficient de frottement
181	!Config Def = 0.0001
182	!Config Help = calcul du Cdrag
183	rugos = 0.0001
184	CALL getin('rugos',rugos)
185
186	!Config Key = wtsurf et wqsurf
187	!Config Desc = ???
188	!Config Def = 0.0 0.0
189	!Config Help =
190	wtsurf = 0.0
191	wqsurf = 0.0
192	CALL getin('wtsurf',wtsurf)
193	CALL getin('wqsurf',wqsurf)
194
195	!Config Key = albedo
196	!Config Desc = albedo
197	!Config Def = 0.09
198	!Config Help =
199	albedo = 0.09
200	CALL getin('albedo',albedo)
201
202	!Config Key = agesno
203	!Config Desc = age de la neige
204	!Config Def = 30.0
205	!Config Help =
206	xagesno = 30.0
207	CALL getin('agesno',xagesno)
208
209	!Config Key = restart_runoff
210	!Config Desc = age de la neige
211	!Config Def = 30.0
212	!Config Help =
213	restart_runoff = 0.0
214	CALL getin('restart_runoff',restart_runoff)
215
216	!Config Key = qsolinp
217	!Config Desc = initial bucket water content (kg/m2) when land (5std)
218	!Config Def = 30.0
219	!Config Help =
220	qsolinp = 1.
221	CALL getin('qsolinp',qsolinp)
222
223	!Config Key = zpicinp
224	!Config Desc = denivellation orographie
225	!Config Def = 300.
226	!Config Help = input brise
227	zpicinp = 300.
228	CALL getin('zpicinp',zpicinp)
229
230
231	write(lunout,*)' +++++++++++++++++++++++++++++++++++++++'
232	write(lunout,*)' Configuration des parametres du gcm1D: '
233	write(lunout,*)' +++++++++++++++++++++++++++++++++++++++'
234	write(lunout,*)' restart = ', restart
235	write(lunout,*)' forcing_type = ', forcing_type
236	write(lunout,*)' time_ini = ', time_ini
237	write(lunout,*)' rlat = ', xlat
238	write(lunout,*)' rlon = ', xlon
239	write(lunout,*)' airephy = ', airefi
240	write(lunout,*)' nat_surf = ', nat_surf
241	write(lunout,*)' tsurf = ', tsurf
242	write(lunout,*)' psurf = ', psurf
243	write(lunout,*)' zsurf = ', zsurf
244	write(lunout,*)' rugos = ', rugos
245	write(lunout,*)' wtsurf = ', wtsurf
246	write(lunout,*)' wqsurf = ', wqsurf
247	write(lunout,*)' albedo = ', albedo
248	write(lunout,*)' xagesno = ', xagesno
249	write(lunout,*)' restart_runoff = ', restart_runoff
250	write(lunout,*)' qsolinp = ', qsolinp
251	write(lunout,*)' zpicinp = ', zpicinp
252	IF (forcing_type .eq.40) THEN
253	write(lunout,*) '--- Forcing type GCSS Old --- with:'
254	write(lunout,*)'imp_fcg',imp_fcg_gcssold
255	write(lunout,*)'ts_fcg',ts_fcg_gcssold
256	write(lunout,*)'tp_fcg',Tp_fcg_gcssold
257	write(lunout,*)'tp_ini',Tp_ini_gcssold
258	write(lunout,*)'xturb_fcg',xTurb_fcg_gcssold
259	ENDIF
260
261	write(lunout,*)' +++++++++++++++++++++++++++++++++++++++'
262	write(lunout,*)
263	c
264	RETURN
265	END
266	!
267	! $Id: dyn1deta0.F 1279 2010/07/30 A Lahellec$
268	!
269	c
270	SUBROUTINE dyn1deta0(fichnom,plev,play,phi,phis,presnivs,
271	& ucov,vcov,temp,q,omega2)
272	USE dimphy
273	USE mod_grid_phy_lmdz
274	USE mod_phys_lmdz_para
275	USE iophy
276	USE phys_state_var_mod
277	USE iostart
278	USE write_field_phy
279	USE infotrac
280	use control_mod
281
282	IMPLICIT NONE
283	c=======================================================
284	c Ecriture du fichier de redemarrage sous format NetCDF
285	c=======================================================
286	c Declarations:
287	c -------------
288	#include "dimensions.h"
289	#include "comconst.h"
290	#include "temps.h"
291	!!#include "control.h"
292	#include "logic.h"
293	#include "netcdf.inc"
294
295	c Arguments:
296	c ----------
297	CHARACTER() fichnom
298	cAl1 plev tronque pour .nc mais plev(klev+1):=0
299	real :: plev(klon,klev),play (klon,klev),phi(klon,klev)
300	real :: presnivs(klon,klev)
301	real :: ucov(klon,klev),vcov(klon,klev),temp(klon,klev)
302	real :: q(klon,klev,nqtot),omega2(klon,klev)
303	c real :: ug(klev),vg(klev),fcoriolis
304	real :: phis(klon)
305
306	c Variables locales pour NetCDF:
307	c ------------------------------
308	INTEGER nid, nvarid
309	INTEGER idim_s
310	INTEGER ierr, ierr_file
311	INTEGER iq
312	INTEGER length
313	PARAMETER (length = 100)
314	REAL tab_cntrl(length) ! tableau des parametres du run
315	character*4 nmq(nqtot)
316	character*12 modname
317	character*80 abort_message
318	LOGICAL found
319	c
320	INTEGER nb
321
322	modname = 'dyn1deta0 : '
323	nmq(1)="vap"
324	nmq(2)="cond"
325	do iq=3,nqtot
326	write(nmq(iq),'("tra",i1)') iq-2
327	enddo
328	print*,'in dyn1deta0 ',fichnom,klon,klev,nqtot
329	CALL open_startphy(fichnom)
330	print*,'after open startphy ',fichnom,nmq
331
332	c
333	c Lecture des parametres de controle:
334	c
335	CALL get_var("controle",tab_cntrl)
336
337
338	im = tab_cntrl(1)
339	jm = tab_cntrl(2)
340	lllm = tab_cntrl(3)
341	day_ref = tab_cntrl(4)
342	annee_ref = tab_cntrl(5)
343	c rad = tab_cntrl(6)
344	c omeg = tab_cntrl(7)
345	c g = tab_cntrl(8)
346	c cpp = tab_cntrl(9)
347	c kappa = tab_cntrl(10)
348	c daysec = tab_cntrl(11)
349	c dtvr = tab_cntrl(12)
350	c etot0 = tab_cntrl(13)
351	c ptot0 = tab_cntrl(14)
352	c ztot0 = tab_cntrl(15)
353	c stot0 = tab_cntrl(16)
354	c ang0 = tab_cntrl(17)
355	c pa = tab_cntrl(18)
356	c preff = tab_cntrl(19)
357	c
358	c clon = tab_cntrl(20)
359	c clat = tab_cntrl(21)
360	c grossismx = tab_cntrl(22)
361	c grossismy = tab_cntrl(23)
362	c
363	IF ( tab_cntrl(24).EQ.1. ) THEN
364	fxyhypb = . TRUE .
365	c dzoomx = tab_cntrl(25)
366	c dzoomy = tab_cntrl(26)
367	c taux = tab_cntrl(28)
368	c tauy = tab_cntrl(29)
369	ELSE
370	fxyhypb = . FALSE .
371	ysinus = . FALSE .
372	IF( tab_cntrl(27).EQ.1. ) ysinus = . TRUE.
373	ENDIF
374
375	day_ini = tab_cntrl(30)
376	itau_dyn = tab_cntrl(31)
377	c .................................................................
378	c
379	c
380	c PRINT*,'rad,omeg,g,cpp,kappa',rad,omeg,g,cpp,kappa
381	cAl1
382	Print*,'day_ref,annee_ref,day_ini,itau_dyn',
383	& day_ref,annee_ref,day_ini,itau_dyn
384
385	c Lecture des champs
386	c
387	plev(1,klev+1)=0.
388	CALL get_field("plev",plev,found)
389	IF (.NOT. found) PRINT*, modname//'Le champ <Plev> est absent'
390	CALL get_field("play",play,found)
391	IF (.NOT. found) PRINT*, modname//'Le champ <Play> est absent'
392	CALL get_field("phi",phi,found)
393	IF (.NOT. found) PRINT*, modname//'Le champ <Phi> est absent'
394	CALL get_field("phis",phis,found)
395	IF (.NOT. found) PRINT*, modname//'Le champ <Phis> est absent'
396	CALL get_field("presnivs",presnivs,found)
397	IF (.NOT. found) PRINT*, modname//'Le champ <Presnivs> est absent'
398	CALL get_field("ucov",ucov,found)
399	IF (.NOT. found) PRINT*, modname//'Le champ <ucov> est absent'
400	CALL get_field("vcov",vcov,found)
401	IF (.NOT. found) PRINT*, modname//'Le champ <vcov> est absent'
402	CALL get_field("temp",temp,found)
403	IF (.NOT. found) PRINT*, modname//'Le champ <temp> est absent'
404	CALL get_field("omega2",omega2,found)
405	IF (.NOT. found) PRINT*, modname//'Le champ <omega2> est absent'
406
407	Do iq=1,nqtot
408	CALL get_field("q"//nmq(iq),q(:,:,iq),found)
409	IF (.NOT. found)
410	& PRINT*, modname//'Le champ <q'//nmq//'> est absent'
411	EndDo
412
413	CALL close_startphy
414	print*,' close startphy'
415	. ,fichnom,play(1,1),play(1,klev),temp(1,klev)
416	c
417	RETURN
418	END
419	!
420	! $Id: dyn1dredem.F 1279 2010/07/29 A Lahellec$
421	!
422	c
423	SUBROUTINE dyn1dredem(fichnom,plev,play,phi,phis,presnivs,
424	& ucov,vcov,temp,q,omega2)
425	USE dimphy
426	USE mod_grid_phy_lmdz
427	USE mod_phys_lmdz_para
428	USE phys_state_var_mod
429	USE iostart
430	USE infotrac
431	use control_mod
432
433	IMPLICIT NONE
434	c=======================================================
435	c Ecriture du fichier de redemarrage sous format NetCDF
436	c=======================================================
437	c Declarations:
438	c -------------
439	#include "dimensions.h"
440	#include "comconst.h"
441	#include "temps.h"
442	!!#include "control.h"
443	#include "logic.h"
444	#include "netcdf.inc"
445
446	c Arguments:
447	c ----------
448	CHARACTER() fichnom
449	REAL time
450	cAl1 plev tronque pour .nc mais plev(klev+1):=0
451	real :: plev(klon,klev),play (klon,klev),phi(klon,klev)
452	real :: presnivs(klon,klev)
453	real :: ucov(klon,klev),vcov(klon,klev),temp(klon,klev)
454	real :: q(klon,klev,nqtot)
455	real :: omega2(klon,klev),rho(klon,klev+1)
456	c real :: ug(klev),vg(klev),fcoriolis
457	real :: phis(klon)
458
459	c Variables locales pour NetCDF:
460	c ------------------------------
461	INTEGER nid, nvarid
462	INTEGER idim_s
463	INTEGER ierr, ierr_file
464	INTEGER iq,l
465	INTEGER length
466	PARAMETER (length = 100)
467	REAL tab_cntrl(length) ! tableau des parametres du run
468	character*4 nmq(nqtot)
469	character*20 modname
470	character*80 abort_message
471	c
472	INTEGER nb
473	SAVE nb
474	DATA nb / 0 /
475
476	REAL zan0,zjulian,hours
477	INTEGER yyears0,jjour0, mmois0
478	character*30 unites
479
480	cDbg
481	CALL open_restartphy(fichnom)
482	print*,'redm1 ',fichnom,klon,klev,nqtot
483	nmq(1)="vap"
484	nmq(2)="cond"
485	nmq(3)="tra1"
486	nmq(4)="tra2"
487
488	modname = 'dyn1dredem'
489	ierr = NF_OPEN(fichnom, NF_WRITE, nid)
490	IF (ierr .NE. NF_NOERR) THEN
491	PRINT*, "Pb. d ouverture "//fichnom
492	CALL abort
493	ENDIF
494
495	DO l=1,length
496	tab_cntrl(l) = 0.
497	ENDDO
498	tab_cntrl(1) = FLOAT(iim)
499	tab_cntrl(2) = FLOAT(jjm)
500	tab_cntrl(3) = FLOAT(llm)
501	tab_cntrl(4) = FLOAT(day_ref)
502	tab_cntrl(5) = FLOAT(annee_ref)
503	tab_cntrl(6) = rad
504	tab_cntrl(7) = omeg
505	tab_cntrl(8) = g
506	tab_cntrl(9) = cpp
507	tab_cntrl(10) = kappa
508	tab_cntrl(11) = daysec
509	tab_cntrl(12) = dtvr
510	c tab_cntrl(13) = etot0
511	c tab_cntrl(14) = ptot0
512	c tab_cntrl(15) = ztot0
513	c tab_cntrl(16) = stot0
514	c tab_cntrl(17) = ang0
515	c tab_cntrl(18) = pa
516	c tab_cntrl(19) = preff
517	c
518	c ..... parametres pour le zoom ......
519
520	c tab_cntrl(20) = clon
521	c tab_cntrl(21) = clat
522	c tab_cntrl(22) = grossismx
523	c tab_cntrl(23) = grossismy
524	c
525	IF ( fxyhypb ) THEN
526	tab_cntrl(24) = 1.
527	c tab_cntrl(25) = dzoomx
528	c tab_cntrl(26) = dzoomy
529	tab_cntrl(27) = 0.
530	c tab_cntrl(28) = taux
531	c tab_cntrl(29) = tauy
532	ELSE
533	tab_cntrl(24) = 0.
534	c tab_cntrl(25) = dzoomx
535	c tab_cntrl(26) = dzoomy
536	tab_cntrl(27) = 0.
537	tab_cntrl(28) = 0.
538	tab_cntrl(29) = 0.
539	IF( ysinus ) tab_cntrl(27) = 1.
540	ENDIF
541	CAl1 iday_end -> day_end
542	tab_cntrl(30) = FLOAT(day_end)
543	tab_cntrl(31) = FLOAT(itau_dyn + itaufin)
544	c
545	CALL put_var("controle","Param. de controle Dyn1D",tab_cntrl)
546	c
547
548	c Ecriture/extension de la coordonnee temps
549
550	nb = nb + 1
551
552	c Ecriture des champs
553	c
554	CALL put_field("plev","p interfaces sauf la nulle",plev)
555	CALL put_field("play","",play)
556	CALL put_field("phi","geopotentielle",phi)
557	CALL put_field("phis","geopotentiell de surface",phis)
558	CALL put_field("presnivs","",presnivs)
559	CALL put_field("ucov","",ucov)
560	CALL put_field("vcov","",vcov)
561	CALL put_field("temp","",temp)
562	CALL put_field("omega2","",omega2)
563
564	Do iq=1,nqtot
565	CALL put_field("q"//nmq(iq),"eau vap ou condens et traceurs",
566	. q(:,:,iq))
567	EndDo
568	CALL close_restartphy
569
570	c
571	RETURN
572	END
573	SUBROUTINE gr_fi_dyn(nfield,ngrid,im,jm,pfi,pdyn)
574	IMPLICIT NONE
575	!=======================================================================
576	! passage d'un champ de la grille scalaire a la grille physique
577	!=======================================================================
578
579	!-----------------------------------------------------------------------
580	! declarations:
581	! -------------
582
583	INTEGER im,jm,ngrid,nfield
584	REAL pdyn(im,jm,nfield)
585	REAL pfi(ngrid,nfield)
586
587	INTEGER i,j,ifield,ig
588
589	!-----------------------------------------------------------------------
590	! calcul:
591	! -------
592
593	DO ifield=1,nfield
594	! traitement des poles
595	DO i=1,im
596	pdyn(i,1,ifield)=pfi(1,ifield)
597	pdyn(i,jm,ifield)=pfi(ngrid,ifield)
598	ENDDO
599
600	! traitement des point normaux
601	DO j=2,jm-1
602	ig=2+(j-2)*(im-1)
603	CALL SCOPY(im-1,pfi(ig,ifield),1,pdyn(1,j,ifield),1)
604	pdyn(im,j,ifield)=pdyn(1,j,ifield)
605	ENDDO
606	ENDDO
607
608	RETURN
609	END
610
611
612
613	SUBROUTINE abort_gcm(modname, message, ierr)
614
615	USE IOIPSL
616	!
617	! Stops the simulation cleanly, closing files and printing various
618	! comments
619	!
620	! Input: modname = name of calling program
621	! message = stuff to print
622	! ierr = severity of situation ( = 0 normal )
623
624	character*20 modname
625	integer ierr
626	character*80 message
627
628	write(,) 'in abort_gcm'
629	call histclo
630	! call histclo(2)
631	! call histclo(3)
632	! call histclo(4)
633	! call histclo(5)
634	write(,) 'out of histclo'
635	write(,) 'Stopping in ', modname
636	write(,) 'Reason = ',message
637	call getin_dump
638	!
639	if (ierr .eq. 0) then
640	write(,) 'Everything is cool'
641	else
642	write(,) 'Houston, we have a problem ', ierr
643	endif
644	STOP
645	END
646	REAL FUNCTION fq_sat(kelvin, millibar)
647	!
648	IMPLICIT none
649	!======================================================================
650	! Autheur(s): Z.X. Li (LMD/CNRS)
651	! Objet: calculer la vapeur d'eau saturante (formule Centre Euro.)
652	!======================================================================
653	! Arguments:
654	! kelvin---input-R: temperature en Kelvin
655	! millibar--input-R: pression en mb
656	!
657	! fq_sat----output-R: vapeur d'eau saturante en kg/kg
658	!======================================================================
659	!
660	REAL kelvin, millibar
661	!
662	REAL r2es
663	PARAMETER (r2es=611.14 *18.0153/28.9644)
664	!
665	REAL r3les, r3ies, r3es
666	PARAMETER (R3LES=17.269)
667	PARAMETER (R3IES=21.875)
668	!
669	REAL r4les, r4ies, r4es
670	PARAMETER (R4LES=35.86)
671	PARAMETER (R4IES=7.66)
672	!
673	REAL rtt
674	PARAMETER (rtt=273.16)
675	!
676	REAL retv
677	PARAMETER (retv=28.9644/18.0153 - 1.0)
678	!
679	REAL zqsat
680	REAL temp, pres
681	! ------------------------------------------------------------------
682	!
683	!
684	temp = kelvin
685	pres = millibar * 100.0
686	! write(,)'kelvin,millibar=',kelvin,millibar
687	! write(,)'temp,pres=',temp,pres
688	!
689	IF (temp .LE. rtt) THEN
690	r3es = r3ies
691	r4es = r4ies
692	ELSE
693	r3es = r3les
694	r4es = r4les
695	ENDIF
696	!
697	zqsat=r2es/pres * EXP ( r3es*(temp-rtt) / (temp-r4es) )
698	zqsat=MIN(0.5,ZQSAT)
699	zqsat=zqsat/(1.-retv *zqsat)
700	!
701	fq_sat = zqsat
702	!
703	RETURN
704	END
705	subroutine scopy(n,sx,incx,sy,incy)
706	!
707	IMPLICIT NONE
708	!
709	integer n,incx,incy,ix,iy,i
710	real sx((n-1)incx+1),sy((n-1)incy+1)
711	!
712	iy=1
713	ix=1
714	do 10 i=1,n
715	sy(iy)=sx(ix)
716	ix=ix+incx
717	iy=iy+incy
718	10 continue
719	!
720	return
721	end
722	subroutine wrgradsfi(if,nl,field,name,titlevar)
723	implicit none
724
725	! Declarations
726
727	#include "gradsdef.h"
728
729	! arguments
730	integer if,nl
731	real field(imxjmxlmx)
732	character*10 name,file
733	character*10 titlevar
734
735	! local
736
737	integer im,jm,lm,i,j,l,iv,iii,iji,iif,ijf
738
739	logical writectl
740
741
742	writectl=.false.
743
744	! print*,if,iid(if),jid(if),ifd(if),jfd(if)
745	iii=iid(if)
746	iji=jid(if)
747	iif=ifd(if)
748	ijf=jfd(if)
749	im=iif-iii+1
750	jm=ijf-iji+1
751	lm=lmd(if)
752
753
754	! print*,'im,jm,lm,name,firsttime(if)'
755	! print*,im,jm,lm,name,firsttime(if)
756
757	if(firsttime(if)) then
758	if(name.eq.var(1,if)) then
759	firsttime(if)=.false.
760	ivar(if)=1
761	print*,'fin de l initialiation de l ecriture du fichier'
762	print*,file
763	print*,'fichier no: ',if
764	print*,'unit ',unit(if)
765	print*,'nvar ',nvar(if)
766	print*,'vars ',(var(iv,if),iv=1,nvar(if))
767	else
768	ivar(if)=ivar(if)+1
769	nvar(if)=ivar(if)
770	var(ivar(if),if)=name
771	tvar(ivar(if),if)=trim(titlevar)
772	nld(ivar(if),if)=nl
773	print*,'initialisation ecriture de ',var(ivar(if),if)
774	print*,'if ivar(if) nld ',if,ivar(if),nld(ivar(if),if)
775	endif
776	writectl=.true.
777	itime(if)=1
778	else
779	ivar(if)=mod(ivar(if),nvar(if))+1
780	if (ivar(if).eq.nvar(if)) then
781	writectl=.true.
782	itime(if)=itime(if)+1
783	endif
784
785	if(var(ivar(if),if).ne.name) then
786	print*,'Il faut stoker la meme succession de champs a chaque'
787	print*,'pas de temps'
788	print*,'fichier no: ',if
789	print*,'unit ',unit(if)
790	print*,'nvar ',nvar(if)
791	print*,'vars ',(var(iv,if),iv=1,nvar(if))
792
793	stop
794	endif
795	endif
796
797	! print*,'ivar(if),nvar(if),var(ivar(if),if),writectl'
798	! print*,ivar(if),nvar(if),var(ivar(if),if),writectl
799	do l=1,nl
800	irec(if)=irec(if)+1
801	! print*,'Ecrit rec=',irec(if),iii,iif,iji,ijf,
802	! s (l-1)imd(if)jmd(if)+(iji-1)*imd(if)+iii
803	! s ,(l-1)imd(if)jmd(if)+(ijf-1)*imd(if)+iif
804	write(unit(if)+1,rec=irec(if))
805	s ((field((l-1)imd(if)jmd(if)+(j-1)*imd(if)+i)
806	s ,i=iii,iif),j=iji,ijf)
807	enddo
808	if (writectl) then
809
810	file=fichier(if)
811	! WARNING! on reecrase le fichier .ctl a chaque ecriture
812	open(unit(if),file=trim(file)//'.ctl',
813	& form='formatted',status='unknown')
814	write(unit(if),'(a5,1x,a40)')
815	& 'DSET ','^'//trim(file)//'.dat'
816
817	write(unit(if),'(a12)') 'UNDEF 1.0E30'
818	write(unit(if),'(a5,1x,a40)') 'TITLE ',title(if)
819	call formcoord(unit(if),im,xd(iii,if),1.,.false.,'XDEF')
820	call formcoord(unit(if),jm,yd(iji,if),1.,.true.,'YDEF')
821	call formcoord(unit(if),lm,zd(1,if),1.,.false.,'ZDEF')
822	write(unit(if),'(a4,i10,a30)')
823	& 'TDEF ',itime(if),' LINEAR 07AUG1998 30MN '
824	write(unit(if),'(a4,2x,i5)') 'VARS',nvar(if)
825	do iv=1,nvar(if)
826	! print*,'if,var(iv,if),nld(iv,if),nld(iv,if)-1/nld(iv,if)'
827	! print*,if,var(iv,if),nld(iv,if),nld(iv,if)-1/nld(iv,if)
828	write(unit(if),1000) var(iv,if),nld(iv,if)-1/nld(iv,if)
829	& ,99,tvar(iv,if)
830	enddo
831	write(unit(if),'(a7)') 'ENDVARS'
832	!
833	1000 format(a5,3x,i4,i3,1x,a39)
834
835	close(unit(if))
836
837	endif ! writectl
838
839	return
840
841	END
842
843	subroutine inigrads(if,im
844	s ,x,fx,xmin,xmax,jm,y,ymin,ymax,fy,lm,z,fz
845	s ,dt,file,titlel)
846
847
848	implicit none
849
850	integer if,im,jm,lm,i,j,l
851	real x(im),y(jm),z(lm),fx,fy,fz,dt
852	real xmin,xmax,ymin,ymax
853	integer nf
854
855	character file10,titlel40
856
857	#include "gradsdef.h"
858
859	data unit/24,32,34,36,38,40,42,44,46,48/
860	data nf/0/
861
862	if (if.le.nf) stop'verifier les appels a inigrads'
863
864	print*,'Entree dans inigrads'
865
866	nf=if
867	title(if)=titlel
868	ivar(if)=0
869
870	fichier(if)=trim(file)
871
872	firsttime(if)=.true.
873	dtime(if)=dt
874
875	iid(if)=1
876	ifd(if)=im
877	imd(if)=im
878	do i=1,im
879	xd(i,if)=x(i)*fx
880	if(xd(i,if).lt.xmin) iid(if)=i+1
881	if(xd(i,if).le.xmax) ifd(if)=i
882	enddo
883	print*,'On stoke du point ',iid(if),' a ',ifd(if),' en x'
884
885	jid(if)=1
886	jfd(if)=jm
887	jmd(if)=jm
888	do j=1,jm
889	yd(j,if)=y(j)*fy
890	if(yd(j,if).gt.ymax) jid(if)=j+1
891	if(yd(j,if).ge.ymin) jfd(if)=j
892	enddo
893	print*,'On stoke du point ',jid(if),' a ',jfd(if),' en y'
894
895	print*,'Open de dat'
896	print*,'file=',file
897	print*,'fichier(if)=',fichier(if)
898
899	print,4(ifd(if)-iid(if))*(jfd(if)-jid(if))
900	print*,trim(file)//'.dat'
901
902	OPEN (unit(if)+1,FILE=trim(file)//'.dat',
903	s FORM='UNFORMATTED',
904	s ACCESS='DIRECT'
905	s ,RECL=4(ifd(if)-iid(if)+1)(jfd(if)-jid(if)+1))
906
907	print*,'Open de dat ok'
908
909	lmd(if)=lm
910	do l=1,lm
911	zd(l,if)=z(l)*fz
912	enddo
913
914	irec(if)=0
915	!CR
916	! print*,if,imd(if),jmd(if),lmd(if)
917	! print*,'if,imd(if),jmd(if),lmd(if)'
918
919	return
920	end
921	SUBROUTINE gr_dyn_fi(nfield,im,jm,ngrid,pdyn,pfi)
922	IMPLICIT NONE
923	!=======================================================================
924	! passage d'un champ de la grille scalaire a la grille physique
925	!=======================================================================
926
927	!-----------------------------------------------------------------------
928	! declarations:
929	! -------------
930
931	INTEGER im,jm,ngrid,nfield
932	REAL pdyn(im,jm,nfield)
933	REAL pfi(ngrid,nfield)
934
935	INTEGER j,ifield,ig
936
937	!-----------------------------------------------------------------------
938	! calcul:
939	! -------
940
941	IF(ngrid.NE.2+(jm-2)*(im-1).AND.ngrid.NE.1)
942	s STOP 'probleme de dim'
943	! traitement des poles
944	CALL SCOPY(nfield,pdyn,im*jm,pfi,ngrid)
945	CALL SCOPY(nfield,pdyn(1,jm,1),im*jm,pfi(ngrid,1),ngrid)
946
947	! traitement des point normaux
948	DO ifield=1,nfield
949	DO j=2,jm-1
950	ig=2+(j-2)*(im-1)
951	CALL SCOPY(im-1,pdyn(1,j,ifield),1,pfi(ig,ifield),1)
952	ENDDO
953	ENDDO
954
955	RETURN
956	END
957
958	SUBROUTINE disvert(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
959
960	! Auteur : P. Le Van .
961	!
962	IMPLICIT NONE
963
964	#include "dimensions.h"
965	#include "paramet.h"
966	!
967	!=======================================================================
968	!
969	!
970	! s = sigma ** kappa : coordonnee verticale
971	! dsig(l) : epaisseur de la couche l ds la coord. s
972	! sig(l) : sigma a l'interface des couches l et l-1
973	! ds(l) : distance entre les couches l et l-1 en coord.s
974	!
975	!=======================================================================
976	!
977	REAL pa,preff
978	REAL ap(llmp1),bp(llmp1),dpres(llm),nivsigs(llm),nivsig(llmp1)
979	REAL presnivs(llm)
980	!
981	! declarations:
982	! -------------
983	!
984	REAL sig(llm+1),dsig(llm)
985	!
986	INTEGER l
987	REAL snorm
988	REAL alpha,beta,gama,delta,deltaz,h
989	INTEGER np,ierr
990	REAL pi,x
991
992	!-----------------------------------------------------------------------
993	!
994	pi=2.*ASIN(1.)
995
996	OPEN(99,file='sigma.def',status='old',form='formatted',
997	s iostat=ierr)
998
999	!-----------------------------------------------------------------------
1000	! cas 1 on lit les options dans sigma.def:
1001	! ----------------------------------------
1002
1003	IF (ierr.eq.0) THEN
1004
1005	print*,'WARNING!!! on lit les options dans sigma.def'
1006	READ(99,*) deltaz
1007	READ(99,*) h
1008	READ(99,*) beta
1009	READ(99,*) gama
1010	READ(99,*) delta
1011	READ(99,*) np
1012	CLOSE(99)
1013	alpha=deltaz/(llm*h)
1014	!
1015
1016	DO 1 l = 1, llm
1017	dsig(l) = (alpha+(1.-alpha)exp(-beta(llm-l)))*
1018	$ ( (tanh(gamal)/tanh(gamallm))**np +
1019	$ (1.-l/FLOAT(llm))*delta )
1020	1 CONTINUE
1021
1022	sig(1)=1.
1023	DO 101 l=1,llm-1
1024	sig(l+1)=sig(l)*(1.-dsig(l))/(1.+dsig(l))
1025	101 CONTINUE
1026	sig(llm+1)=0.
1027
1028	DO 2 l = 1, llm
1029	dsig(l) = sig(l)-sig(l+1)
1030	2 CONTINUE
1031	!
1032
1033	ELSE
1034	!-----------------------------------------------------------------------
1035	! cas 2 ancienne discretisation (LMD5...):
1036	! ----------------------------------------
1037
1038	PRINT*,'WARNING!!! Ancienne discretisation verticale'
1039
1040	h=7.
1041	snorm = 0.
1042	DO l = 1, llm
1043	x = 2.asin(1.) (FLOAT(l)-0.5) / float(llm+1)
1044	dsig(l) = 1.0 + 7.0 * SIN(x)**2
1045	snorm = snorm + dsig(l)
1046	ENDDO
1047	snorm = 1./snorm
1048	DO l = 1, llm
1049	dsig(l) = dsig(l)*snorm
1050	ENDDO
1051	sig(llm+1) = 0.
1052	DO l = llm, 1, -1
1053	sig(l) = sig(l+1) + dsig(l)
1054	ENDDO
1055
1056	ENDIF
1057
1058
1059	DO l=1,llm
1060	nivsigs(l) = FLOAT(l)
1061	ENDDO
1062
1063	DO l=1,llmp1
1064	nivsig(l)= FLOAT(l)
1065	ENDDO
1066
1067	!
1068	! .... Calculs de ap(l) et de bp(l) ....
1069	! .........................................
1070	!
1071	!
1072	! ..... pa et preff sont lus sur les fichiers start par lectba .....
1073	!
1074
1075	bp(llmp1) = 0.
1076
1077	DO l = 1, llm
1078	!c
1079	!cc ap(l) = 0.
1080	!cc bp(l) = sig(l)
1081
1082	bp(l) = EXP( 1. -1./( sig(l)*sig(l)) )
1083	ap(l) = pa * ( sig(l) - bp(l) )
1084	!
1085	ENDDO
1086	ap(llmp1) = pa * ( sig(llmp1) - bp(llmp1) )
1087
1088	PRINT *,' BP '
1089	PRINT *, bp
1090	PRINT *,' AP '
1091	PRINT *, ap
1092
1093	DO l = 1, llm
1094	dpres(l) = bp(l) - bp(l+1)
1095	presnivs(l) = 0.5 ( ap(l)+bp(l)preff + ap(l+1)+bp(l+1)*preff )
1096	ENDDO
1097
1098	PRINT *,' PRESNIVS '
1099	PRINT *,presnivs
1100
1101	RETURN
1102	END
1103
1104	!======================================================================
1105	SUBROUTINE read_tsurf1d(knon,knindex,sst_out)
1106
1107	! This subroutine specifies the surface temperature to be used in 1D simulations
1108
1109	USE dimphy, ONLY : klon
1110
1111	INTEGER, INTENT(IN) :: knon ! nomber of points on compressed grid
1112	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex ! grid point number for compressed grid
1113	REAL, DIMENSION(klon), INTENT(OUT) :: sst_out ! tsurf used to force the single-column model
1114
1115	INTEGER :: i
1116	! COMMON defined in lmdz1d.F:
1117	real ts_cur
1118	common /sst_forcing/ts_cur
1119
1120	DO i = 1, knon
1121	sst_out(i) = ts_cur
1122	ENDDO
1123
1124	END SUBROUTINE read_tsurf1d
1125
1126	!===============================================================
1127	subroutine advect_vert(llm,w,dt,q,plev)
1128	!===============================================================
1129	! Schema amont pour l'advection verticale en 1D
1130	! w est la vitesse verticale dp/dt en Pa/s
1131	! Traitement en volumes finis
1132	! d / dt ( zm q ) = delta_z ( omega q )
1133	! d / dt ( zm ) = delta_z ( omega )
1134	! avec zm = delta_z ( p )
1135	! si * designe la valeur au pas de temps t+dt
1136	! zm(l) q(l) - zm(l) q(l) = w(l+1) q(l+1) - w(l) q(l)
1137	! zm*(l) -zm(l) = w(l+1) - w(l)
1138	! avec w=omega * dt
1139	!---------------------------------------------------------------
1140	implicit none
1141	! arguments
1142	integer llm
1143	real w(llm+1),q(llm),plev(llm+1),dt
1144
1145	! local
1146	integer l
1147	real zwq(llm+1),zm(llm+1),zw(llm+1)
1148	real qold
1149
1150	!---------------------------------------------------------------
1151
1152	do l=1,llm
1153	zw(l)=dt*w(l)
1154	zm(l)=plev(l)-plev(l+1)
1155	zwq(l)=q(l)*zw(l)
1156	enddo
1157	zwq(llm+1)=0.
1158	zw(llm+1)=0.
1159
1160	do l=1,llm
1161	qold=q(l)
1162	q(l)=(q(l)*zm(l)+zwq(l+1)-zwq(l))/(zm(l)+zw(l+1)-zw(l))
1163	print*,'ADV Q ',zm(l),zw(l),zwq(l),qold,q(l)
1164	enddo
1165
1166
1167	return
1168	end
1169
1170	!===============================================================
1171
1172
1173	SUBROUTINE advect_va(llm,omega,d_t_va,d_q_va,d_u_va,d_v_va,
1174	! q,temp,u,v,
1175	! play,plev)
1176	!itlmd
1177	!----------------------------------------------------------------------
1178	! Calcul de l'advection verticale (ascendance et subsidence) de
1179	! température et d'humidité. Hypothèse : ce qui rentre de l'extérieur
1180	! a les mêmes caractéristiques que l'air de la colonne 1D (WTG) ou
1181	! sans WTG rajouter une advection horizontale
1182	!----------------------------------------------------------------------
1183	implicit none
1184	#include "YOMCST.h"
1185	! argument
1186	integer llm
1187	real omega(llm+1),d_t_va(llm), d_q_va(llm,3)
1188	real d_u_va(llm), d_v_va(llm)
1189	real q(llm,3),temp(llm)
1190	real u(llm),v(llm)
1191	real play(llm),plev(llm+1)
1192	! interne
1193	integer l
1194	real alpha,omgdown,omgup
1195
1196	do l= 1,llm
1197	if(l.eq.1) then
1198	!si omgup pour la couche 1, alors tendance nulle
1199	omgdown=max(omega(2),0.0)
1200	alpha = rkappatemp(l)(1.+q(l,1)rv/rd)/(play(l)
1201	& (1.+q(l,1)))
1202	d_t_va(l)= alpha*(omgdown)-
1203	& omgdown*(temp(l)-temp(l+1))
1204	& /(play(l)-play(l+1))
1205
1206	d_q_va(l,:)= -omgdown*(q(l,:)-q(l+1,:))
1207	& /(play(l)-play(l+1))
1208
1209	d_u_va(l)= -omgdown*(u(l)-u(l+1))
1210	& /(play(l)-play(l+1))
1211	d_v_va(l)= -omgdown*(v(l)-v(l+1))
1212	& /(play(l)-play(l+1))
1213
1214
1215	elseif(l.eq.llm) then
1216	omgup=min(omega(l),0.0)
1217	alpha = rkappatemp(l)(1.+q(l,1)rv/rd)/(play(l)
1218	& (1.+q(l,1)))
1219	d_t_va(l)= alpha*(omgup)-
1220	!bug? & omgup*(temp(l-1)-temp(l))/(play(l-1)-plev(l))
1221	& omgup*(temp(l-1)-temp(l))/(play(l-1)-play(l))
1222	d_q_va(l,:)= -omgup*(q(l-1,:)-q(l,:))/(play(l-1)-play(l))
1223	d_u_va(l)= -omgup*(u(l-1)-u(l))/(play(l-1)-play(l))
1224	d_v_va(l)= -omgup*(v(l-1)-v(l))/(play(l-1)-play(l))
1225
1226	else
1227	omgup=min(omega(l),0.0)
1228	omgdown=max(omega(l+1),0.0)
1229	alpha = rkappatemp(l)(1.+q(l,1)rv/rd)/(play(l)
1230	& (1.+q(l,1)))
1231	d_t_va(l)= alpha*(omgup+omgdown)-
1232	& omgdown*(temp(l)-temp(l+1))
1233	& /(play(l)-play(l+1))-
1234	!bug? & omgup*(temp(l-1)-temp(l))/(play(l-1)-plev(l))
1235	& omgup*(temp(l-1)-temp(l))/(play(l-1)-play(l))
1236	! print*, ' ??? '
1237
1238	d_q_va(l,:)= -omgdown*(q(l,:)-q(l+1,:))
1239	& /(play(l)-play(l+1))-
1240	& omgup*(q(l-1,:)-q(l,:))/(play(l-1)-play(l))
1241	d_u_va(l)= -omgdown*(u(l)-u(l+1))
1242	& /(play(l)-play(l+1))-
1243	& omgup*(u(l-1)-u(l))/(play(l-1)-play(l))
1244	d_v_va(l)= -omgdown*(v(l)-v(l+1))
1245	& /(play(l)-play(l+1))-
1246	& omgup*(v(l-1)-v(l))/(play(l-1)-play(l))
1247
1248	endif
1249
1250	enddo
1251	!fin itlmd
1252	return
1253	end
1254	! SUBROUTINE lstendH(llm,omega,d_t_va,d_q_va,d_u_va,d_v_va,
1255	SUBROUTINE lstendH(llm,nqtot,omega,d_t_va,d_q_va,
1256	! q,temp,u,v,play)
1257	!itlmd
1258	!----------------------------------------------------------------------
1259	! Calcul de l'advection verticale (ascendance et subsidence) de
1260	! température et d'humidité. Hypothèse : ce qui rentre de l'extérieur
1261	! a les mêmes caractéristiques que l'air de la colonne 1D (WTG) ou
1262	! sans WTG rajouter une advection horizontale
1263	!----------------------------------------------------------------------
1264	implicit none
1265	#include "YOMCST.h"
1266	! argument
1267	integer llm,nqtot
1268	real omega(llm+1),d_t_va(llm), d_q_va(llm,nqtot)
1269	! real d_u_va(llm), d_v_va(llm)
1270	real q(llm,nqtot),temp(llm)
1271	real u(llm),v(llm)
1272	real play(llm)
1273	real cor(llm)
1274	! real dph(llm),dudp(llm),dvdp(llm),dqdp(llm),dtdp(llm)
1275	real dph(llm),dqdp(llm),dtdp(llm)
1276	! interne
1277	integer l,k
1278	real alpha,omdn,omup
1279
1280	! dudp=0.
1281	! dvdp=0.
1282	dqdp=0.
1283	dtdp=0.
1284	! d_u_va=0.
1285	! d_v_va=0.
1286
1287	cor(:) = rkappatemp(1.+q(:,1)rv/rd)/(play(1.+q(:,1)))
1288
1289
1290	do k=2,llm-1
1291
1292	dph (k-1) = (play(k )- play(k-1 ))
1293	! dudp (k-1) = (u (k )- u (k-1 ))/dph(k-1)
1294	! dvdp (k-1) = (v (k )- v (k-1 ))/dph(k-1)
1295	dqdp (k-1) = (q (k,1)- q (k-1,1))/dph(k-1)
1296	dtdp (k-1) = (temp(k )- temp(k-1 ))/dph(k-1)
1297
1298	enddo
1299
1300	! dudp ( llm ) = dudp ( llm-1 )
1301	! dvdp ( llm ) = dvdp ( llm-1 )
1302	dqdp ( llm ) = dqdp ( llm-1 )
1303	dtdp ( llm ) = dtdp ( llm-1 )
1304
1305	do k=2,llm-1
1306	omdn=max(0.0,omega(k+1))
1307	omup=min(0.0,omega( k ))
1308
1309	! d_u_va(k) = -omdndudp(k)-omupdudp(k-1)
1310	! d_v_va(k) = -omdndvdp(k)-omupdvdp(k-1)
1311	d_q_va(k,1)= -omdndqdp(k)-omupdqdp(k-1)
1312	d_t_va(k) = -omdndtdp(k)-omupdtdp(k-1)
1313	: +(omup+omdn)*cor(k)
1314	enddo
1315
1316	omdn=max(0.0,omega( 2 ))
1317	omup=min(0.0,omega(llm))
1318	! d_u_va( 1 ) = -omdn*dudp( 1 )
1319	! d_u_va(llm) = -omup*dudp(llm)
1320	! d_v_va( 1 ) = -omdn*dvdp( 1 )
1321	! d_v_va(llm) = -omup*dvdp(llm)
1322	d_q_va( 1 ,1) = -omdn*dqdp( 1 )
1323	d_q_va(llm,1) = -omup*dqdp(llm)
1324	d_t_va( 1 ) = -omdndtdp( 1 )+omdncor( 1 )
1325	d_t_va(llm) = -omupdtdp(llm)!+omupcor(llm)
1326
1327	! if(abs(rlat(1))>10.) then
1328	! Calculate the tendency due agestrophic motions
1329	! du_age = fcoriolis*(v-vg)
1330	! dv_age = fcoriolis*(ug-u)
1331	! endif
1332
1333	! call writefield_phy('d_t_va',d_t_va,llm)
1334
1335	return
1336	end
1337
1338	!======================================================================
1339	SUBROUTINE read_togacoare(fich_toga,nlev_toga,nt_toga
1340	: ,ts_toga,plev_toga,t_toga,q_toga,u_toga,v_toga,w_toga
1341	: ,ht_toga,vt_toga,hq_toga,vq_toga)
1342	implicit none
1343
1344	c-------------------------------------------------------------------------
1345	c Read TOGA-COARE forcing data
1346	c-------------------------------------------------------------------------
1347
1348	integer nlev_toga,nt_toga
1349	real ts_toga(nt_toga),plev_toga(nlev_toga,nt_toga)
1350	real t_toga(nlev_toga,nt_toga),q_toga(nlev_toga,nt_toga)
1351	real u_toga(nlev_toga,nt_toga),v_toga(nlev_toga,nt_toga)
1352	real w_toga(nlev_toga,nt_toga)
1353	real ht_toga(nlev_toga,nt_toga),vt_toga(nlev_toga,nt_toga)
1354	real hq_toga(nlev_toga,nt_toga),vq_toga(nlev_toga,nt_toga)
1355	character*80 fich_toga
1356
1357	integer no,l,k,ip
1358	real riy,rim,rid,rih,bid
1359
1360	integer iy,im,id,ih
1361
1362	real plev_min
1363
1364	plev_min = 55. ! pas de tendance de vap. d eau au-dessus de 55 hPa
1365
1366	open(21,file=trim(fich_toga),form='formatted')
1367	read(21,'(a)')
1368	do ip = 1, nt_toga
1369	read(21,'(a)')
1370	read(21,'(a)')
1371	read(21,223) iy, im, id, ih, bid, ts_toga(ip), bid,bid,bid,bid
1372	read(21,'(a)')
1373	read(21,'(a)')
1374
1375	do k = 1, nlev_toga
1376	read(21,230) plev_toga(k,ip), t_toga(k,ip), q_toga(k,ip)
1377	: ,u_toga(k,ip), v_toga(k,ip), w_toga(k,ip)
1378	: ,ht_toga(k,ip), vt_toga(k,ip), hq_toga(k,ip), vq_toga(k,ip)
1379
1380	! conversion in SI units:
1381	t_toga(k,ip)=t_toga(k,ip)+273.15 ! K
1382	q_toga(k,ip)=q_toga(k,ip)*0.001 ! kg/kg
1383	w_toga(k,ip)=w_toga(k,ip)*100./3600. ! Pa/s
1384	! no water vapour tendency above 55 hPa
1385	if (plev_toga(k,ip) .lt. plev_min) then
1386	q_toga(k,ip) = 0.
1387	hq_toga(k,ip) = 0.
1388	vq_toga(k,ip) =0.
1389	endif
1390	enddo
1391
1392	ts_toga(ip)=ts_toga(ip)+273.15 ! K
1393	enddo
1394	close(21)
1395
1396	223 format(4i3,6f8.2)
1397	226 format(f7.1,1x,10f8.2)
1398	227 format(f7.1,1x,1p,4e11.3)
1399	230 format(6f9.3,4e11.3)
1400
1401	return
1402	end
1403
1404	!=====================================================================
1405	subroutine read_twpice(fich_twpice,nlevel,ntime
1406	: ,T_srf,plev,T,q,u,v,omega
1407	: ,T_adv_h,T_adv_v,q_adv_h,q_adv_v)
1408
1409	!program reading forcings of the TWP-ICE experiment
1410
1411	! use netcdf
1412
1413	implicit none
1414
1415	#include "netcdf.inc"
1416
1417	integer ntime,nlevel
1418	integer l,k
1419	character*80 :: fich_twpice
1420	real*8 time(ntime)
1421	real*8 lat, lon, alt, phis
1422	real*8 lev(nlevel)
1423	real*8 plev(nlevel,ntime)
1424
1425	real*8 T(nlevel,ntime)
1426	real*8 q(nlevel,ntime),u(nlevel,ntime)
1427	real*8 v(nlevel,ntime)
1428	real*8 omega(nlevel,ntime), div(nlevel,ntime)
1429	real*8 T_adv_h(nlevel,ntime)
1430	real*8 T_adv_v(nlevel,ntime), q_adv_h(nlevel,ntime)
1431	real*8 q_adv_v(nlevel,ntime)
1432	real*8 s(nlevel,ntime), s_adv_h(nlevel,ntime)
1433	real*8 s_adv_v(nlevel,ntime)
1434	real*8 p_srf_aver(ntime), p_srf_center(ntime)
1435	real*8 T_srf(ntime)
1436
1437	integer nid, ierr
1438	integer nbvar3d
1439	parameter(nbvar3d=20)
1440	integer var3didin(nbvar3d)
1441
1442	ierr = NF_OPEN(fich_twpice,NF_NOWRITE,nid)
1443	if (ierr.NE.NF_NOERR) then
1444	write(,) 'ERROR: Pb opening forcings cdf file '
1445	write(,) NF_STRERROR(ierr)
1446	stop ""
1447	endif
1448
1449	ierr=NF_INQ_VARID(nid,"lat",var3didin(1))
1450	if(ierr/=NF_NOERR) then
1451	write(,) NF_STRERROR(ierr)
1452	stop 'lat'
1453	endif
1454
1455	ierr=NF_INQ_VARID(nid,"lon",var3didin(2))
1456	if(ierr/=NF_NOERR) then
1457	write(,) NF_STRERROR(ierr)
1458	stop 'lon'
1459	endif
1460
1461	ierr=NF_INQ_VARID(nid,"alt",var3didin(3))
1462	if(ierr/=NF_NOERR) then
1463	write(,) NF_STRERROR(ierr)
1464	stop 'alt'
1465	endif
1466
1467	ierr=NF_INQ_VARID(nid,"phis",var3didin(4))
1468	if(ierr/=NF_NOERR) then
1469	write(,) NF_STRERROR(ierr)
1470	stop 'phis'
1471	endif
1472
1473	ierr=NF_INQ_VARID(nid,"T",var3didin(5))
1474	if(ierr/=NF_NOERR) then
1475	write(,) NF_STRERROR(ierr)
1476	stop 'T'
1477	endif
1478
1479	ierr=NF_INQ_VARID(nid,"q",var3didin(6))
1480	if(ierr/=NF_NOERR) then
1481	write(,) NF_STRERROR(ierr)
1482	stop 'q'
1483	endif
1484
1485	ierr=NF_INQ_VARID(nid,"u",var3didin(7))
1486	if(ierr/=NF_NOERR) then
1487	write(,) NF_STRERROR(ierr)
1488	stop 'u'
1489	endif
1490
1491	ierr=NF_INQ_VARID(nid,"v",var3didin(8))
1492	if(ierr/=NF_NOERR) then
1493	write(,) NF_STRERROR(ierr)
1494	stop 'v'
1495	endif
1496
1497	ierr=NF_INQ_VARID(nid,"omega",var3didin(9))
1498	if(ierr/=NF_NOERR) then
1499	write(,) NF_STRERROR(ierr)
1500	stop 'omega'
1501	endif
1502
1503	ierr=NF_INQ_VARID(nid,"div",var3didin(10))
1504	if(ierr/=NF_NOERR) then
1505	write(,) NF_STRERROR(ierr)
1506	stop 'div'
1507	endif
1508
1509	ierr=NF_INQ_VARID(nid,"T_adv_h",var3didin(11))
1510	if(ierr/=NF_NOERR) then
1511	write(,) NF_STRERROR(ierr)
1512	stop 'T_adv_h'
1513	endif
1514
1515	ierr=NF_INQ_VARID(nid,"T_adv_v",var3didin(12))
1516	if(ierr/=NF_NOERR) then
1517	write(,) NF_STRERROR(ierr)
1518	stop 'T_adv_v'
1519	endif
1520
1521	ierr=NF_INQ_VARID(nid,"q_adv_h",var3didin(13))
1522	if(ierr/=NF_NOERR) then
1523	write(,) NF_STRERROR(ierr)
1524	stop 'q_adv_h'
1525	endif
1526
1527	ierr=NF_INQ_VARID(nid,"q_adv_v",var3didin(14))
1528	if(ierr/=NF_NOERR) then
1529	write(,) NF_STRERROR(ierr)
1530	stop 'q_adv_v'
1531	endif
1532
1533	ierr=NF_INQ_VARID(nid,"s",var3didin(15))
1534	if(ierr/=NF_NOERR) then
1535	write(,) NF_STRERROR(ierr)
1536	stop 's'
1537	endif
1538
1539	ierr=NF_INQ_VARID(nid,"s_adv_h",var3didin(16))
1540	if(ierr/=NF_NOERR) then
1541	write(,) NF_STRERROR(ierr)
1542	stop 's_adv_h'
1543	endif
1544
1545	ierr=NF_INQ_VARID(nid,"s_adv_v",var3didin(17))
1546	if(ierr/=NF_NOERR) then
1547	write(,) NF_STRERROR(ierr)
1548	stop 's_adv_v'
1549	endif
1550
1551	ierr=NF_INQ_VARID(nid,"p_srf_aver",var3didin(18))
1552	if(ierr/=NF_NOERR) then
1553	write(,) NF_STRERROR(ierr)
1554	stop 'p_srf_aver'
1555	endif
1556
1557	ierr=NF_INQ_VARID(nid,"p_srf_center",var3didin(19))
1558	if(ierr/=NF_NOERR) then
1559	write(,) NF_STRERROR(ierr)
1560	stop 'p_srf_center'
1561	endif
1562
1563	ierr=NF_INQ_VARID(nid,"T_srf",var3didin(20))
1564	if(ierr/=NF_NOERR) then
1565	write(,) NF_STRERROR(ierr)
1566	stop 'T_srf'
1567	endif
1568
1569	!dimensions lecture
1570	call catchaxis(nid,ntime,nlevel,time,lev,ierr)
1571
1572	!pressure
1573	do l=1,ntime
1574	do k=1,nlevel
1575	plev(k,l)=lev(k)
1576	enddo
1577	enddo
1578
1579	#ifdef NC_DOUBLE
1580	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(1),lat)
1581	#else
1582	ierr = NF_GET_VAR_REAL(nid,var3didin(1),lat)
1583	#endif
1584	if(ierr/=NF_NOERR) then
1585	write(,) NF_STRERROR(ierr)
1586	stop "getvarup"
1587	endif
1588	! write(,)'lecture lat ok',lat
1589
1590	#ifdef NC_DOUBLE
1591	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(2),lon)
1592	#else
1593	ierr = NF_GET_VAR_REAL(nid,var3didin(2),lon)
1594	#endif
1595	if(ierr/=NF_NOERR) then
1596	write(,) NF_STRERROR(ierr)
1597	stop "getvarup"
1598	endif
1599	! write(,)'lecture lon ok',lon
1600
1601	#ifdef NC_DOUBLE
1602	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(3),alt)
1603	#else
1604	ierr = NF_GET_VAR_REAL(nid,var3didin(3),alt)
1605	#endif
1606	if(ierr/=NF_NOERR) then
1607	write(,) NF_STRERROR(ierr)
1608	stop "getvarup"
1609	endif
1610	! write(,)'lecture alt ok',alt
1611
1612	#ifdef NC_DOUBLE
1613	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(4),phis)
1614	#else
1615	ierr = NF_GET_VAR_REAL(nid,var3didin(4),phis)
1616	#endif
1617	if(ierr/=NF_NOERR) then
1618	write(,) NF_STRERROR(ierr)
1619	stop "getvarup"
1620	endif
1621	! write(,)'lecture phis ok',phis
1622
1623	#ifdef NC_DOUBLE
1624	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(5),T)
1625	#else
1626	ierr = NF_GET_VAR_REAL(nid,var3didin(5),T)
1627	#endif
1628	if(ierr/=NF_NOERR) then
1629	write(,) NF_STRERROR(ierr)
1630	stop "getvarup"
1631	endif
1632	! write(,)'lecture T ok'
1633
1634	#ifdef NC_DOUBLE
1635	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(6),q)
1636	#else
1637	ierr = NF_GET_VAR_REAL(nid,var3didin(6),q)
1638	#endif
1639	if(ierr/=NF_NOERR) then
1640	write(,) NF_STRERROR(ierr)
1641	stop "getvarup"
1642	endif
1643	! write(,)'lecture q ok'
1644	!q in kg/kg
1645	do l=1,ntime
1646	do k=1,nlevel
1647	q(k,l)=q(k,l)/1000.
1648	enddo
1649	enddo
1650	#ifdef NC_DOUBLE
1651	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(7),u)
1652	#else
1653	ierr = NF_GET_VAR_REAL(nid,var3didin(7),u)
1654	#endif
1655	if(ierr/=NF_NOERR) then
1656	write(,) NF_STRERROR(ierr)
1657	stop "getvarup"
1658	endif
1659	! write(,)'lecture u ok'
1660
1661	#ifdef NC_DOUBLE
1662	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(8),v)
1663	#else
1664	ierr = NF_GET_VAR_REAL(nid,var3didin(8),v)
1665	#endif
1666	if(ierr/=NF_NOERR) then
1667	write(,) NF_STRERROR(ierr)
1668	stop "getvarup"
1669	endif
1670	! write(,)'lecture v ok'
1671
1672	#ifdef NC_DOUBLE
1673	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(9),omega)
1674	#else
1675	ierr = NF_GET_VAR_REAL(nid,var3didin(9),omega)
1676	#endif
1677	if(ierr/=NF_NOERR) then
1678	write(,) NF_STRERROR(ierr)
1679	stop "getvarup"
1680	endif
1681	! write(,)'lecture omega ok'
1682	!omega in mb/hour
1683	do l=1,ntime
1684	do k=1,nlevel
1685	omega(k,l)=omega(k,l)*100./3600.
1686	enddo
1687	enddo
1688
1689	#ifdef NC_DOUBLE
1690	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(10),div)
1691	#else
1692	ierr = NF_GET_VAR_REAL(nid,var3didin(10),div)
1693	#endif
1694	if(ierr/=NF_NOERR) then
1695	write(,) NF_STRERROR(ierr)
1696	stop "getvarup"
1697	endif
1698	! write(,)'lecture div ok'
1699
1700	#ifdef NC_DOUBLE
1701	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(11),T_adv_h)
1702	#else
1703	ierr = NF_GET_VAR_REAL(nid,var3didin(11),T_adv_h)
1704	#endif
1705	if(ierr/=NF_NOERR) then
1706	write(,) NF_STRERROR(ierr)
1707	stop "getvarup"
1708	endif
1709	! write(,)'lecture T_adv_h ok'
1710	!T adv in K/s
1711	do l=1,ntime
1712	do k=1,nlevel
1713	T_adv_h(k,l)=T_adv_h(k,l)/3600.
1714	enddo
1715	enddo
1716
1717
1718	#ifdef NC_DOUBLE
1719	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(12),T_adv_v)
1720	#else
1721	ierr = NF_GET_VAR_REAL(nid,var3didin(12),T_adv_v)
1722	#endif
1723	if(ierr/=NF_NOERR) then
1724	write(,) NF_STRERROR(ierr)
1725	stop "getvarup"
1726	endif
1727	! write(,)'lecture T_adv_v ok'
1728	!T adv in K/s
1729	do l=1,ntime
1730	do k=1,nlevel
1731	T_adv_v(k,l)=T_adv_v(k,l)/3600.
1732	enddo
1733	enddo
1734
1735	#ifdef NC_DOUBLE
1736	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(13),q_adv_h)
1737	#else
1738	ierr = NF_GET_VAR_REAL(nid,var3didin(13),q_adv_h)
1739	#endif
1740	if(ierr/=NF_NOERR) then
1741	write(,) NF_STRERROR(ierr)
1742	stop "getvarup"
1743	endif
1744	! write(,)'lecture q_adv_h ok'
1745	!q adv in kg/kg/s
1746	do l=1,ntime
1747	do k=1,nlevel
1748	q_adv_h(k,l)=q_adv_h(k,l)/1000./3600.
1749	enddo
1750	enddo
1751
1752
1753	#ifdef NC_DOUBLE
1754	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(14),q_adv_v)
1755	#else
1756	ierr = NF_GET_VAR_REAL(nid,var3didin(14),q_adv_v)
1757	#endif
1758	if(ierr/=NF_NOERR) then
1759	write(,) NF_STRERROR(ierr)
1760	stop "getvarup"
1761	endif
1762	! write(,)'lecture q_adv_v ok'
1763	!q adv in kg/kg/s
1764	do l=1,ntime
1765	do k=1,nlevel
1766	q_adv_v(k,l)=q_adv_v(k,l)/1000./3600.
1767	enddo
1768	enddo
1769
1770
1771	#ifdef NC_DOUBLE
1772	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(15),s)
1773	#else
1774	ierr = NF_GET_VAR_REAL(nid,var3didin(15),s)
1775	#endif
1776	if(ierr/=NF_NOERR) then
1777	write(,) NF_STRERROR(ierr)
1778	stop "getvarup"
1779	endif
1780
1781	#ifdef NC_DOUBLE
1782	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(16),s_adv_h)
1783	#else
1784	ierr = NF_GET_VAR_REAL(nid,var3didin(16),s_adv_h)
1785	#endif
1786	if(ierr/=NF_NOERR) then
1787	write(,) NF_STRERROR(ierr)
1788	stop "getvarup"
1789	endif
1790
1791	#ifdef NC_DOUBLE
1792	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(17),s_adv_v)
1793	#else
1794	ierr = NF_GET_VAR_REAL(nid,var3didin(17),s_adv_v)
1795	#endif
1796	if(ierr/=NF_NOERR) then
1797	write(,) NF_STRERROR(ierr)
1798	stop "getvarup"
1799	endif
1800
1801	#ifdef NC_DOUBLE
1802	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(18),p_srf_aver)
1803	#else
1804	ierr = NF_GET_VAR_REAL(nid,var3didin(18),p_srf_aver)
1805	#endif
1806	if(ierr/=NF_NOERR) then
1807	write(,) NF_STRERROR(ierr)
1808	stop "getvarup"
1809	endif
1810
1811	#ifdef NC_DOUBLE
1812	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(19),p_srf_center)
1813	#else
1814	ierr = NF_GET_VAR_REAL(nid,var3didin(19),p_srf_center)
1815	#endif
1816	if(ierr/=NF_NOERR) then
1817	write(,) NF_STRERROR(ierr)
1818	stop "getvarup"
1819	endif
1820
1821	#ifdef NC_DOUBLE
1822	ierr = NF_GET_VAR_DOUBLE(nid,var3didin(20),T_srf)
1823	#else
1824	ierr = NF_GET_VAR_REAL(nid,var3didin(20),T_srf)
1825	#endif
1826	if(ierr/=NF_NOERR) then
1827	write(,) NF_STRERROR(ierr)
1828	stop "getvarup"
1829	endif
1830	! write(,)'lecture T_srf ok', T_srf
1831
1832	return
1833	end subroutine read_twpice
1834	!=====================================================================
1835	subroutine catchaxis(nid,ttm,llm,time,lev,ierr)
1836
1837	! use netcdf
1838
1839	implicit none
1840	#include "netcdf.inc"
1841	integer nid,ttm,llm
1842	real*8 time(ttm)
1843	real*8 lev(llm)
1844	integer ierr
1845
1846	integer i
1847	integer timevar,levvar
1848	integer timelen,levlen
1849	integer timedimin,levdimin
1850
1851	! Control & lecture on dimensions
1852	! ===============================
1853	ierr=NF_INQ_DIMID(nid,"time",timedimin)
1854	ierr=NF_INQ_VARID(nid,"time",timevar)
1855	if (ierr.NE.NF_NOERR) then
1856	write(,) 'ERROR: Field <time> is missing'
1857	stop ""
1858	endif
1859	ierr=NF_INQ_DIMLEN(nid,timedimin,timelen)
1860
1861	ierr=NF_INQ_DIMID(nid,"lev",levdimin)
1862	ierr=NF_INQ_VARID(nid,"lev",levvar)
1863	if (ierr.NE.NF_NOERR) then
1864	write(,) 'ERROR: Field <lev> is lacking'
1865	stop ""
1866	endif
1867	ierr=NF_INQ_DIMLEN(nid,levdimin,levlen)
1868
1869	if((timelen/=ttm).or.(levlen/=llm)) then
1870	write(,) 'ERROR: Not the good lenght for axis'
1871	write(,) 'longitude: ',timelen,ttm+1
1872	write(,) 'latitude: ',levlen,llm
1873	stop ""
1874	endif
1875
1876	!#ifdef NC_DOUBLE
1877	ierr = NF_GET_VAR_DOUBLE(nid,timevar,time)
1878	ierr = NF_GET_VAR_DOUBLE(nid,levvar,lev)
1879	!#else
1880	! ierr = NF_GET_VAR_REAL(nid,timevar,time)
1881	! ierr = NF_GET_VAR_REAL(nid,levvar,lev)
1882	!#endif
1883
1884	return
1885	end
1886
1887	!======================================================================
1888	SUBROUTINE read_rico(fich_rico,nlev_rico,ps_rico,play
1889	: ,ts_rico,t_rico,q_rico,u_rico,v_rico,w_rico
1890	: ,dth_dyn,dqh_dyn)
1891	implicit none
1892
1893	c-------------------------------------------------------------------------
1894	c Read RICO forcing data
1895	c-------------------------------------------------------------------------
1896	#include "dimensions.h"
1897
1898
1899	integer nlev_rico
1900	real ts_rico,ps_rico
1901	real t_rico(llm),q_rico(llm)
1902	real u_rico(llm),v_rico(llm)
1903	real w_rico(llm)
1904	real dth_dyn(llm)
1905	real dqh_dyn(llm)
1906
1907
1908	real play(llm),zlay(llm)
1909
1910
1911	real prico(nlev_rico),zrico(nlev_rico)
1912
1913	character*80 fich_rico
1914
1915	integer k,l
1916
1917
1918	print*,fich_rico
1919	open(21,file=trim(fich_rico),form='formatted')
1920	do k=1,llm
1921	zlay(k)=0.
1922	enddo
1923
1924	read(21,*) ps_rico,ts_rico
1925	prico(1)=ps_rico
1926	zrico(1)=0.0
1927	do l=2,nlev_rico
1928	read(21,*) k,prico(l),zrico(l)
1929	enddo
1930	close(21)
1931
1932	do k=1,llm
1933	do l=1,80
1934	if(prico(l)>play(k)) then
1935	if(play(k)>prico(l+1)) then
1936	zlay(k)=zrico(l)+(play(k)-prico(l)) *
1937	& (zrico(l+1)-zrico(l))/(prico(l+1)-prico(l))
1938	else
1939	zlay(k)=zrico(l)+(play(k)-prico(80))*
1940	& (zrico(81)-zrico(80))/(prico(81)-prico(80))
1941	endif
1942	endif
1943	enddo
1944	print*,k,zlay(k)
1945	! U
1946	if(0 < zlay(k) .and. zlay(k) < 4000) then
1947	u_rico(k)=-9.9 + (-1.9 + 9.9)*zlay(k)/4000
1948	elseif(4000 < zlay(k) .and. zlay(k) < 12000) then
1949	u_rico(k)= -1.9 + (30.0 + 1.9) /
1950	: (12000 - 4000) * (zlay(k) - 4000)
1951	elseif(12000 < zlay(k) .and. zlay(k) < 13000) then
1952	u_rico(k)=30.0
1953	elseif(13000 < zlay(k) .and. zlay(k) < 20000) then
1954	u_rico(k)=30.0 - (30.0) /
1955	: (20000 - 13000) * (zlay(k) - 13000)
1956	else
1957	u_rico(k)=0.0
1958	endif
1959
1960	!Q_v
1961	if(0 < zlay(k) .and. zlay(k) < 740) then
1962	q_rico(k)=16.0 + (13.8 - 16.0) / (740) * zlay(k)
1963	elseif(740 < zlay(k) .and. zlay(k) < 3260) then
1964	q_rico(k)=13.8 + (2.4 - 13.8) /
1965	: (3260 - 740) * (zlay(k) - 740)
1966	elseif(3260 < zlay(k) .and. zlay(k) < 4000) then
1967	q_rico(k)=2.4 + (1.8 - 2.4) /
1968	: (4000 - 3260) * (zlay(k) - 3260)
1969	elseif(4000 < zlay(k) .and. zlay(k) < 9000) then
1970	q_rico(k)=1.8 + (0 - 1.8) /
1971	: (10000 - 4000) * (zlay(k) - 4000)
1972	else
1973	q_rico(k)=0.0
1974	endif
1975
1976	!T
1977	if(0 < zlay(k) .and. zlay(k) < 740) then
1978	t_rico(k)=299.2 + (292.0 - 299.2) / (740) * zlay(k)
1979	elseif(740 < zlay(k) .and. zlay(k) < 4000) then
1980	t_rico(k)=292.0 + (278.0 - 292.0) /
1981	: (4000 - 740) * (zlay(k) - 740)
1982	elseif(4000 < zlay(k) .and. zlay(k) < 15000) then
1983	t_rico(k)=278.0 + (203.0 - 278.0) /
1984	: (15000 - 4000) * (zlay(k) - 4000)
1985	elseif(15000 < zlay(k) .and. zlay(k) < 17500) then
1986	t_rico(k)=203.0 + (194.0 - 203.0) /
1987	: (17500 - 15000)* (zlay(k) - 15000)
1988	elseif(17500 < zlay(k) .and. zlay(k) < 20000) then
1989	t_rico(k)=194.0 + (206.0 - 194.0) /
1990	: (20000 - 17500)* (zlay(k) - 17500)
1991	elseif(20000 < zlay(k) .and. zlay(k) < 60000) then
1992	t_rico(k)=206.0 + (270.0 - 206.0) /
1993	: (60000 - 20000)* (zlay(k) - 20000)
1994	endif
1995
1996	! W
1997	if(0 < zlay(k) .and. zlay(k) < 2260 ) then
1998	w_rico(k)=- (0.005/2260) * zlay(k)
1999	elseif(2260 < zlay(k) .and. zlay(k) < 4000 ) then
2000	w_rico(k)=- 0.005
2001	elseif(4000 < zlay(k) .and. zlay(k) < 5000 ) then
2002	w_rico(k)=- 0.005 + (0.005/ (5000 - 4000)) * (zlay(k) - 4000)
2003	else
2004	w_rico(k)=0.0
2005	endif
2006
2007	! dThrz+dTsw0+dTlw0
2008	if(0 < zlay(k) .and. zlay(k) < 4000) then
2009	dth_dyn(k)=- 2.51 / 86400 + (-2.18 + 2.51 )/
2010	: (864004000) zlay(k)
2011	elseif(4000 < zlay(k) .and. zlay(k) < 5000) then
2012	dth_dyn(k)=- 2.18 / 86400 + ( 2.18 ) /
2013	: (86400(5000 - 4000)) (zlay(k) - 4000)
2014	else
2015	dth_dyn(k)=0.0
2016	endif
2017	! dQhrz
2018	if(0 < zlay(k) .and. zlay(k) < 3000) then
2019	dqh_dyn(k)=-1.0 / 86400 + (0.345 + 1.0)/
2020	: (864003000) (zlay(k))
2021	elseif(3000 < zlay(k) .and. zlay(k) < 4000) then
2022	dqh_dyn(k)=0.345 / 86400
2023	elseif(4000 < zlay(k) .and. zlay(k) < 5000) then
2024	dqh_dyn(k)=0.345 / 86400 +
2025	+ (-0.345)/(86400 * (5000 - 4000)) * (zlay(k)-4000)
2026	else
2027	dqh_dyn(k)=0.0
2028	endif
2029
2030	!? if(play(k)>6e4) then
2031	!? ratqs0(1,k)=ratqsbas*(plev(1)-play(k))/(plev(1)-6e4)
2032	!? elseif((play(k)>3e4).and.(play(k)<6e4)) then
2033	!? ratqs0(1,k)=ratqsbas+(ratqshaut-ratqsbas)&
2034	!? *(6e4-play(k))/(6e4-3e4)
2035	!? else
2036	!? ratqs0(1,k)=ratqshaut
2037	!? endif
2038
2039	enddo
2040
2041	do k=1,llm
2042	q_rico(k)=q_rico(k)/1e3
2043	dqh_dyn(k)=dqh_dyn(k)/1e3
2044	v_rico(k)=-3.8
2045	enddo
2046
2047	return
2048	end
2049
2050	!=====================================================================
2051	c-------------------------------------------------------------------------
2052	SUBROUTINE read_armcu(fich_armcu,nlev_armcu,nt_armcu,
2053	: sens,flat,adv_theta,rad_theta,adv_qt)
2054	implicit none
2055
2056	c-------------------------------------------------------------------------
2057	c Read ARM_CU case forcing data
2058	c-------------------------------------------------------------------------
2059
2060	integer nlev_armcu,nt_armcu
2061	real sens(nt_armcu),flat(nt_armcu)
2062	real adv_theta(nt_armcu),rad_theta(nt_armcu),adv_qt(nt_armcu)
2063	character*80 fich_armcu
2064
2065	integer no,l,k,ip
2066	real riy,rim,rid,rih,bid
2067
2068	integer iy,im,id,ih,in
2069
2070	open(21,file=trim(fich_armcu),form='formatted')
2071	read(21,'(a)')
2072	do ip = 1, nt_armcu
2073	read(21,'(a)')
2074	read(21,'(a)')
2075	read(21,223) iy, im, id, ih, in, sens(ip),flat(ip),
2076	: adv_theta(ip),rad_theta(ip),adv_qt(ip)
2077	print *,'forcages=',iy,im,id,ih,in, sens(ip),flat(ip),
2078	: adv_theta(ip),rad_theta(ip),adv_qt(ip)
2079	enddo
2080	close(21)
2081
2082	223 format(5i3,5f8.3)
2083	226 format(f7.1,1x,10f8.2)
2084	227 format(f7.1,1x,1p,4e11.3)
2085	230 format(6f9.3,4e11.3)
2086
2087	return
2088	end
2089
2090	!=====================================================================
2091	SUBROUTINE interp_toga_vertical(play,nlev_toga,plev_prof
2092	: ,t_prof,q_prof,u_prof,v_prof,w_prof
2093	: ,ht_prof,vt_prof,hq_prof,vq_prof
2094	: ,t_mod,q_mod,u_mod,v_mod,w_mod
2095	: ,ht_mod,vt_mod,hq_mod,vq_mod,mxcalc)
2096
2097	implicit none
2098
2099	#include "dimensions.h"
2100
2101	c-------------------------------------------------------------------------
2102	c Vertical interpolation of TOGA-COARE forcing data onto model levels
2103	c-------------------------------------------------------------------------
2104
2105	integer nlevmax
2106	parameter (nlevmax=41)
2107	integer nlev_toga,mxcalc
2108	! real play(llm), plev_prof(nlevmax)
2109	! real t_prof(nlevmax),q_prof(nlevmax)
2110	! real u_prof(nlevmax),v_prof(nlevmax), w_prof(nlevmax)
2111	! real ht_prof(nlevmax),vt_prof(nlevmax)
2112	! real hq_prof(nlevmax),vq_prof(nlevmax)
2113
2114	real play(llm), plev_prof(nlev_toga)
2115	real t_prof(nlev_toga),q_prof(nlev_toga)
2116	real u_prof(nlev_toga),v_prof(nlev_toga), w_prof(nlev_toga)
2117	real ht_prof(nlev_toga),vt_prof(nlev_toga)
2118	real hq_prof(nlev_toga),vq_prof(nlev_toga)
2119
2120	real t_mod(llm),q_mod(llm)
2121	real u_mod(llm),v_mod(llm), w_mod(llm)
2122	real ht_mod(llm),vt_mod(llm)
2123	real hq_mod(llm),vq_mod(llm)
2124
2125	integer l,k,k1,k2,kp
2126	real aa,frac,frac1,frac2,fact
2127
2128	do l = 1, llm
2129
2130	if (play(l).ge.plev_prof(nlev_toga)) then
2131
2132	mxcalc=l
2133	k1=0
2134	k2=0
2135
2136	if (play(l).le.plev_prof(1)) then
2137
2138	do k = 1, nlev_toga-1
2139	if (play(l).le.plev_prof(k)
2140	: .and. play(l).gt.plev_prof(k+1)) then
2141	k1=k
2142	k2=k+1
2143	endif
2144	enddo
2145
2146	if (k1.eq.0 .or. k2.eq.0) then
2147	write(,) 'PB! k1, k2 = ',k1,k2
2148	write(,) 'l,play(l) = ',l,play(l)/100
2149	do k = 1, nlev_toga-1
2150	write(,) 'k,plev_prof(k) = ',k,plev_prof(k)/100
2151	enddo
2152	endif
2153
2154	frac = (plev_prof(k2)-play(l))/(plev_prof(k2)-plev_prof(k1))
2155	t_mod(l)= t_prof(k2) - frac*(t_prof(k2)-t_prof(k1))
2156	q_mod(l)= q_prof(k2) - frac*(q_prof(k2)-q_prof(k1))
2157	u_mod(l)= u_prof(k2) - frac*(u_prof(k2)-u_prof(k1))
2158	v_mod(l)= v_prof(k2) - frac*(v_prof(k2)-v_prof(k1))
2159	w_mod(l)= w_prof(k2) - frac*(w_prof(k2)-w_prof(k1))
2160	ht_mod(l)= ht_prof(k2) - frac*(ht_prof(k2)-ht_prof(k1))
2161	vt_mod(l)= vt_prof(k2) - frac*(vt_prof(k2)-vt_prof(k1))
2162	hq_mod(l)= hq_prof(k2) - frac*(hq_prof(k2)-hq_prof(k1))
2163	vq_mod(l)= vq_prof(k2) - frac*(vq_prof(k2)-vq_prof(k1))
2164
2165	else !play>plev_prof(1)
2166
2167	k1=1
2168	k2=2
2169	frac1 = (play(l)-plev_prof(k2))/(plev_prof(k1)-plev_prof(k2))
2170	frac2 = (play(l)-plev_prof(k1))/(plev_prof(k1)-plev_prof(k2))
2171	t_mod(l)= frac1t_prof(k1) - frac2t_prof(k2)
2172	q_mod(l)= frac1q_prof(k1) - frac2q_prof(k2)
2173	u_mod(l)= frac1u_prof(k1) - frac2u_prof(k2)
2174	v_mod(l)= frac1v_prof(k1) - frac2v_prof(k2)
2175	w_mod(l)= frac1w_prof(k1) - frac2w_prof(k2)
2176	ht_mod(l)= frac1ht_prof(k1) - frac2ht_prof(k2)
2177	vt_mod(l)= frac1vt_prof(k1) - frac2vt_prof(k2)
2178	hq_mod(l)= frac1hq_prof(k1) - frac2hq_prof(k2)
2179	vq_mod(l)= frac1vq_prof(k1) - frac2vq_prof(k2)
2180
2181	endif ! play.le.plev_prof(1)
2182
2183	else ! above max altitude of forcing file
2184
2185	cjyg
2186	fact=20.*(plev_prof(nlev_toga)-play(l))/plev_prof(nlev_toga) !jyg
2187	fact = max(fact,0.) !jyg
2188	fact = exp(-fact) !jyg
2189	t_mod(l)= t_prof(nlev_toga) !jyg
2190	q_mod(l)= q_prof(nlev_toga)*fact !jyg
2191	u_mod(l)= u_prof(nlev_toga)*fact !jyg
2192	v_mod(l)= v_prof(nlev_toga)*fact !jyg
2193	w_mod(l)= 0.0 !jyg
2194	ht_mod(l)= ht_prof(nlev_toga) !jyg
2195	vt_mod(l)= vt_prof(nlev_toga) !jyg
2196	hq_mod(l)= hq_prof(nlev_toga)*fact !jyg
2197	vq_mod(l)= vq_prof(nlev_toga)*fact !jyg
2198
2199	endif ! play
2200
2201	enddo ! l
2202
2203	! do l = 1,llm
2204	! print *,'t_mod(l),q_mod(l),ht_mod(l),hq_mod(l) ',
2205	! $ l,t_mod(l),q_mod(l),ht_mod(l),hq_mod(l)
2206	! enddo
2207
2208	return
2209	end
2210
2211	!======================================================================
2212	SUBROUTINE interp_toga_time(day,day1,annee_ref
2213	i ,year_ini_toga,day_ini_toga,nt_toga,dt_toga,nlev_toga
2214	i ,ts_toga,plev_toga,t_toga,q_toga,u_toga,v_toga,w_toga
2215	i ,ht_toga,vt_toga,hq_toga,vq_toga
2216	o ,ts_prof,plev_prof,t_prof,q_prof,u_prof,v_prof,w_prof
2217	o ,ht_prof,vt_prof,hq_prof,vq_prof)
2218	implicit none
2219
2220	!---------------------------------------------------------------------------------------
2221	! Time interpolation of a 2D field to the timestep corresponding to day
2222	!
2223	! day: current julian day (e.g. 717538.2)
2224	! day1: first day of the simulation
2225	! nt_toga: total nb of data in the forcing (e.g. 480 for TOGA-COARE)
2226	! dt_toga: total time interval (in sec) between 2 forcing data (e.g. 6h for TOGA-COARE)
2227	!---------------------------------------------------------------------------------------
2228
2229	#include "compar1d.h"
2230
2231	! inputs:
2232	integer annee_ref
2233	integer nt_toga,nlev_toga
2234	integer year_ini_toga
2235	real day, day1,day_ini_toga,dt_toga
2236	real ts_toga(nt_toga)
2237	real plev_toga(nlev_toga,nt_toga),t_toga(nlev_toga,nt_toga)
2238	real q_toga(nlev_toga,nt_toga),u_toga(nlev_toga,nt_toga)
2239	real v_toga(nlev_toga,nt_toga),w_toga(nlev_toga,nt_toga)
2240	real ht_toga(nlev_toga,nt_toga),vt_toga(nlev_toga,nt_toga)
2241	real hq_toga(nlev_toga,nt_toga),vq_toga(nlev_toga,nt_toga)
2242	! outputs:
2243	real ts_prof
2244	real plev_prof(nlev_toga),t_prof(nlev_toga)
2245	real q_prof(nlev_toga),u_prof(nlev_toga)
2246	real v_prof(nlev_toga),w_prof(nlev_toga)
2247	real ht_prof(nlev_toga),vt_prof(nlev_toga)
2248	real hq_prof(nlev_toga),vq_prof(nlev_toga)
2249	! local:
2250	integer it_toga1, it_toga2,k
2251	real timeit,time_toga1,time_toga2,frac
2252
2253
2254	if (forcing_type.eq.2) then
2255	! Check that initial day of the simulation consistent with TOGA-COARE period:
2256	if (annee_ref.ne.1992 .and. annee_ref.ne.1993) then
2257	print*,'Pour TOGA-COARE, annee_ref doit etre 1992 ou 1993'
2258	print*,'Changer annee_ref dans run.def'
2259	stop
2260	endif
2261	if (annee_ref.eq.1992 .and. day1.lt.day_ini_toga) then
2262	print*,'TOGA-COARE a débuté le 1er Nov 1992 (jour julien=306)'
2263	print*,'Changer dayref dans run.def'
2264	stop
2265	endif
2266	if (annee_ref.eq.1993 .and. day1.gt.day_ini_toga+119) then
2267	print*,'TOGA-COARE a fini le 28 Feb 1993 (jour julien=59)'
2268	print*,'Changer dayref ou nday dans run.def'
2269	stop
2270	endif
2271
2272	else if (forcing_type.eq.4) then
2273
2274	! Check that initial day of the simulation consistent with TWP-ICE period:
2275	if (annee_ref.ne.2006) then
2276	print*,'Pour TWP-ICE, annee_ref doit etre 2006'
2277	print*,'Changer annee_ref dans run.def'
2278	stop
2279	endif
2280	if (annee_ref.eq.2006 .and. day1.lt.day_ini_toga) then
2281	print*,'TWP-ICE a debute le 17 Jan 2006 (jour julien=17)'
2282	print*,'Changer dayref dans run.def'
2283	stop
2284	endif
2285	if (annee_ref.eq.2006 .and. day1.gt.day_ini_toga+26) then
2286	print*,'TWP-ICE a fini le 12 Feb 2006 (jour julien=43)'
2287	print*,'Changer dayref ou nday dans run.def'
2288	stop
2289	endif
2290
2291	endif
2292
2293	! Determine timestep relative to the 1st day of TOGA-COARE:
2294	! timeit=(day-day1)*86400.
2295	! if (annee_ref.eq.1992) then
2296	! timeit=(day-day_ini_toga)*86400.
2297	! else
2298	! timeit=(day+61.-1.)*86400. ! 61 days between Nov01 and Dec31 1992
2299	! endif
2300	timeit=(day-day_ini_toga)*86400
2301
2302	! Determine the closest observation times:
2303	it_toga1=INT(timeit/dt_toga)+1
2304	it_toga2=it_toga1 + 1
2305	time_toga1=(it_toga1-1)*dt_toga
2306	time_toga2=(it_toga2-1)*dt_toga
2307
2308	if (it_toga1 .ge. nt_toga) then
2309	write(,) 'PB-stop: day, it_toga1, it_toga2, timeit: '
2310	: ,day,it_toga1,it_toga2,timeit/86400.
2311	stop
2312	endif
2313
2314	! time interpolation:
2315	frac=(time_toga2-timeit)/(time_toga2-time_toga1)
2316	frac=max(frac,0.0)
2317
2318	ts_prof = ts_toga(it_toga2)
2319	: -frac*(ts_toga(it_toga2)-ts_toga(it_toga1))
2320
2321	! print*,
2322	! :'day,annee_ref,day_ini_toga,timeit,it_toga1,it_toga2,SST:',
2323	! :day,annee_ref,day_ini_toga,timeit/86400.,it_toga1,it_toga2,ts_prof
2324
2325	do k=1,nlev_toga
2326	plev_prof(k) = 100.*(plev_toga(k,it_toga2)
2327	: -frac*(plev_toga(k,it_toga2)-plev_toga(k,it_toga1)))
2328	t_prof(k) = t_toga(k,it_toga2)
2329	: -frac*(t_toga(k,it_toga2)-t_toga(k,it_toga1))
2330	q_prof(k) = q_toga(k,it_toga2)
2331	: -frac*(q_toga(k,it_toga2)-q_toga(k,it_toga1))
2332	u_prof(k) = u_toga(k,it_toga2)
2333	: -frac*(u_toga(k,it_toga2)-u_toga(k,it_toga1))
2334	v_prof(k) = v_toga(k,it_toga2)
2335	: -frac*(v_toga(k,it_toga2)-v_toga(k,it_toga1))
2336	w_prof(k) = w_toga(k,it_toga2)
2337	: -frac*(w_toga(k,it_toga2)-w_toga(k,it_toga1))
2338	ht_prof(k) = ht_toga(k,it_toga2)
2339	: -frac*(ht_toga(k,it_toga2)-ht_toga(k,it_toga1))
2340	vt_prof(k) = vt_toga(k,it_toga2)
2341	: -frac*(vt_toga(k,it_toga2)-vt_toga(k,it_toga1))
2342	hq_prof(k) = hq_toga(k,it_toga2)
2343	: -frac*(hq_toga(k,it_toga2)-hq_toga(k,it_toga1))
2344	vq_prof(k) = vq_toga(k,it_toga2)
2345	: -frac*(vq_toga(k,it_toga2)-vq_toga(k,it_toga1))
2346	enddo
2347
2348	return
2349	END
2350
2351	!======================================================================
2352	SUBROUTINE interp_armcu_time(day,day1,annee_ref
2353	i ,year_ini_armcu,day_ini_armcu,nt_armcu,dt_armcu
2354	i ,nlev_armcu,fs_armcu,fl_armcu,at_armcu,rt_armcu
2355	i ,aqt_armcu,fs_prof,fl_prof,at_prof,rt_prof,aqt_prof)
2356	implicit none
2357
2358	!---------------------------------------------------------------------------------------
2359	! Time interpolation of a 2D field to the timestep corresponding to day
2360	!
2361	! day: current julian day (e.g. 717538.2)
2362	! day1: first day of the simulation
2363	! nt_armcu: total nb of data in the forcing (e.g. 31 for armcu)
2364	! dt_armcu: total time interval (in sec) between 2 forcing data (e.g. 1/2h for armcu)
2365	! fs= sensible flux
2366	! fl= latent flux
2367	! at,rt,aqt= advective and radiative tendencies
2368	!---------------------------------------------------------------------------------------
2369
2370	! inputs:
2371	integer annee_ref
2372	integer nt_armcu,nlev_armcu
2373	integer year_ini_armcu
2374	real day, day1,day_ini_armcu,dt_armcu
2375	real fs_armcu(nt_armcu),fl_armcu(nt_armcu),at_armcu(nt_armcu)
2376	real rt_armcu(nt_armcu),aqt_armcu(nt_armcu)
2377	! outputs:
2378	real fs_prof,fl_prof,at_prof,rt_prof,aqt_prof
2379	! local:
2380	integer it_armcu1, it_armcu2,k
2381	real timeit,time_armcu1,time_armcu2,frac
2382
2383	! Check that initial day of the simulation consistent with ARMCU period:
2384	if (annee_ref.ne.1997 ) then
2385	print*,'Pour ARMCU, annee_ref doit etre 1997 '
2386	print*,'Changer annee_ref dans run.def'
2387	stop
2388	endif
2389
2390	timeit=(day-day_ini_armcu)*86400
2391
2392	! Determine the closest observation times:
2393	it_armcu1=INT(timeit/dt_armcu)+1
2394	it_armcu2=it_armcu1 + 1
2395	time_armcu1=(it_armcu1-1)*dt_armcu
2396	time_armcu2=(it_armcu2-1)*dt_armcu
2397	print *,'timeit day day_ini_armcu',timeit,day,day_ini_armcu
2398	print *,'it_armcu1,it_armcu2,time_armcu1,time_armcu2',
2399	. it_armcu1,it_armcu2,time_armcu1,time_armcu2
2400
2401	if (it_armcu1 .ge. nt_armcu) then
2402	write(,) 'PB-stop: day, it_armcu1, it_armcu2, timeit: '
2403	: ,day,it_armcu1,it_armcu2,timeit/86400.
2404	stop
2405	endif
2406
2407	! time interpolation:
2408	frac=(time_armcu2-timeit)/(time_armcu2-time_armcu1)
2409	frac=max(frac,0.0)
2410
2411	fs_prof = fs_armcu(it_armcu2)
2412	: -frac*(fs_armcu(it_armcu2)-fs_armcu(it_armcu1))
2413	fl_prof = fl_armcu(it_armcu2)
2414	: -frac*(fl_armcu(it_armcu2)-fl_armcu(it_armcu1))
2415	at_prof = at_armcu(it_armcu2)
2416	: -frac*(at_armcu(it_armcu2)-at_armcu(it_armcu1))
2417	rt_prof = rt_armcu(it_armcu2)
2418	: -frac*(rt_armcu(it_armcu2)-rt_armcu(it_armcu1))
2419	aqt_prof = aqt_armcu(it_armcu2)
2420	: -frac*(aqt_armcu(it_armcu2)-aqt_armcu(it_armcu1))
2421
2422	print*,
2423	:'day,annee_ref,day_ini_armcu,timeit,it_armcu1,it_armcu2,SST:',
2424	:day,annee_ref,day_ini_armcu,timeit/86400.,it_armcu1,
2425	:it_armcu2,fs_prof,fl_prof,at_prof,rt_prof,aqt_prof
2426
2427	return
2428	END
2429
2430	!=====================================================================
2431	subroutine readprofiles(nlev_max,kmax,height,
2432	. thlprof,qtprof,uprof,
2433	. vprof,e12prof,ugprof,vgprof,
2434	. wfls,dqtdxls,dqtdyls,dqtdtls,
2435	. thlpcar)
2436	implicit none
2437
2438	integer nlev_max,kmax,kmax2
2439	logical :: llesread = .true.
2440
2441	real height(nlev_max),thlprof(nlev_max),qtprof(nlev_max),
2442	. uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max),
2443	. ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max),
2444	. dqtdxls(nlev_max),dqtdyls(nlev_max),dqtdtls(nlev_max),
2445	. thlpcar(nlev_max)
2446
2447	integer, parameter :: ilesfile=1
2448	integer :: ierr,irad,imax,jtot,k
2449	logical :: lmoist,lcoriol,ltimedep
2450	real :: xsize,ysize
2451	real :: ustin,wsvsurf,timerad
2452	character(80) :: chmess
2453
2454	if(.not.(llesread)) return
2455
2456	open (ilesfile,file='prof.inp.001',status='old',iostat=ierr)
2457	if (ierr /= 0) stop 'ERROR:Prof.inp does not exist'
2458	read (ilesfile,*) kmax
2459	do k=1,kmax
2460	read (ilesfile,*) height(k),thlprof(k),qtprof (k),
2461	. uprof (k),vprof (k),e12prof(k)
2462	enddo
2463	close(ilesfile)
2464
2465	open(ilesfile,file='lscale.inp.001',status='old',iostat=ierr)
2466	if (ierr /= 0) stop 'ERROR:Lscale.inp does not exist'
2467	read (ilesfile,*) kmax2
2468	if (kmax .ne. kmax2) then
2469	print *, 'fichiers prof.inp et lscale.inp incompatibles :'
2470	print *, 'nbre de niveaux : ',kmax,' et ',kmax2
2471	stop 'lecture profiles'
2472	endif
2473	do k=1,kmax
2474	read (ilesfile,*) height(k),ugprof(k),vgprof(k),wfls(k),
2475	. dqtdxls(k),dqtdyls(k),dqtdtls(k),thlpcar(k)
2476	end do
2477	close(ilesfile)
2478
2479	return
2480	end
2481
2482
2483	!======================================================================
2484	subroutine readprofile_armcu(nlev_max,kmax,height,pprof,uprof,
2485	. vprof,thetaprof,tprof,qvprof,rvprof,aprof,bprof)
2486	!======================================================================
2487	implicit none
2488
2489	integer nlev_max,kmax,kmax2
2490	logical :: llesread = .true.
2491
2492	real height(nlev_max),pprof(nlev_max),tprof(nlev_max),
2493	. thetaprof(nlev_max),rvprof(nlev_max),
2494	. qvprof(nlev_max),uprof(nlev_max),vprof(nlev_max),
2495	. aprof(nlev_max+1),bprof(nlev_max+1)
2496
2497	integer, parameter :: ilesfile=1
2498	integer, parameter :: ifile=2
2499	integer :: ierr,irad,imax,jtot,k
2500	logical :: lmoist,lcoriol,ltimedep
2501	real :: xsize,ysize
2502	real :: ustin,wsvsurf,timerad
2503	character(80) :: chmess
2504
2505	if(.not.(llesread)) return
2506
2507	! Read profiles at full levels
2508	IF(nlev_max.EQ.19) THEN
2509	open (ilesfile,file='prof.inp.19',status='old',iostat=ierr)
2510	print *,'On ouvre prof.inp.19'
2511	ELSE
2512	open (ilesfile,file='prof.inp.40',status='old',iostat=ierr)
2513	print *,'On ouvre prof.inp.40'
2514	ENDIF
2515	if (ierr /= 0) stop 'ERROR:Prof.inp does not exist'
2516	read (ilesfile,*) kmax
2517	do k=1,kmax
2518	read (ilesfile,*) height(k) ,pprof(k), uprof(k), vprof(k),
2519	. thetaprof(k) ,tprof(k), qvprof(k),rvprof(k)
2520	enddo
2521	close(ilesfile)
2522
2523	! Vertical coordinates half levels for eta-coordinates (plev = alpha + beta * psurf)
2524	IF(nlev_max.EQ.19) THEN
2525	open (ifile,file='proh.inp.19',status='old',iostat=ierr)
2526	print *,'On ouvre proh.inp.19'
2527	if (ierr /= 0) stop 'ERROR:Proh.inp.19 does not exist'
2528	ELSE
2529	open (ifile,file='proh.inp.40',status='old',iostat=ierr)
2530	print *,'On ouvre proh.inp.40'
2531	if (ierr /= 0) stop 'ERROR:Proh.inp.40 does not exist'
2532	ENDIF
2533	read (ifile,*) kmax
2534	do k=1,kmax
2535	read (ifile,*) jtot,aprof(k),bprof(k)
2536	enddo
2537	close(ifile)
2538
2539	return
2540	end
2541	!===============================================================
2542	function ismin(n,sx,incx)
2543
2544	implicit none
2545	integer n,i,incx,ismin,ix
2546	real sx((n-1)*incx+1),sxmin
2547
2548	ix=1
2549	ismin=1
2550	sxmin=sx(1)
2551	do i=1,n-1
2552	ix=ix+incx
2553	if(sx(ix).lt.sxmin) then
2554	sxmin=sx(ix)
2555	ismin=i+1
2556	endif
2557	enddo
2558
2559	return
2560	end
2561
2562	!===============================================================
2563	function ismax(n,sx,incx)
2564
2565	implicit none
2566	integer n,i,incx,ismax,ix
2567	real sx((n-1)*incx+1),sxmax
2568
2569	ix=1
2570	ismax=1
2571	sxmax=sx(1)
2572	do i=1,n-1
2573	ix=ix+incx
2574	if(sx(ix).gt.sxmax) then
2575	sxmax=sx(ix)
2576	ismax=i+1
2577	endif
2578	enddo
2579
2580	return
2581	end
2582

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format