Context Navigation

infotrac.F90 @ 5452

Last change on this file since 5452 was 2575, checked in by acozic, 9 years ago
for the VLR configuration add some modification from the trunk to fit with INCA version use
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory
File size: 13.9 KB

Line
1	! $Id$
2	!
3	MODULE infotrac
4
5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
6	INTEGER, SAVE :: nqtot
7	!CR: on ajoute le nombre de traceurs de l eau
8	INTEGER, SAVE :: nqo
9
10	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
11	! number of tracers used in the physics
12	INTEGER, SAVE :: nbtr
13
14	! Name variables
15	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
16	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
17
18	! iadv : index of trasport schema for each tracer
19	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
20
21	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
22	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
23	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
24
25	! conv_flg(it)=0 : convection desactivated for tracer number it
26	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
27	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
28	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
29
30	CHARACTER(len=4),SAVE :: type_trac
31	CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym
32
33	CONTAINS
34
35	SUBROUTINE infotrac_init
36	USE control_mod
37	#ifdef REPROBUS
38	USE CHEM_REP, ONLY : Init_chem_rep_trac
39	#endif
40	IMPLICIT NONE
41	!=======================================================================
42	!
43	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
44	! -------
45	! Modif special traceur F.Forget 05/94
46	! Modif M-A Filiberti 02/02 lecture de traceur.def
47	!
48	! Objet:
49	! ------
50	! GCM LMD nouvelle grille
51	!
52	!=======================================================================
53	! ... modification de l'integration de q ( 26/04/94 ) ....
54	!-----------------------------------------------------------------------
55	! Declarations
56
57	INCLUDE "dimensions.h"
58	INCLUDE "iniprint.h"
59
60	! Local variables
61	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
62	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
63
64	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
65	CHARACTER(len=3), DIMENSION(30) :: descrq
66	CHARACTER(len=1), DIMENSION(3) :: txts
67	CHARACTER(len=2), DIMENSION(9) :: txtp
68	CHARACTER(len=23) :: str1,str2
69
70	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
71	INTEGER :: iq, new_iq, iiq, jq, ierr
72
73	character(len=*),parameter :: modname="infotrac_init"
74	!-----------------------------------------------------------------------
75	! Initialization :
76	!
77	txts=(/'x','y','z'/)
78	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
79
80	descrq(14)='VLH'
81	descrq(10)='VL1'
82	descrq(11)='VLP'
83	descrq(12)='FH1'
84	descrq(13)='FH2'
85	descrq(16)='PPM'
86	descrq(17)='PPS'
87	descrq(18)='PPP'
88	descrq(20)='SLP'
89	descrq(30)='PRA'
90
91
92	! Coherence test between parameter type_trac, config_inca and preprocessing keys
93	IF (type_trac=='inca') THEN
94	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
95	type_trac,' config_inca=',config_inca
96	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
97	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
98	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
99	END IF
100	#ifndef INCA
101	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
102	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
103	#endif
104	ELSE IF (type_trac=='repr') THEN
105	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
106	#ifndef REPROBUS
107	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
108	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
109	#endif
110	ELSE IF (type_trac == 'lmdz') THEN
111	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
112	ELSE
113	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
114	CALL abort_gcm('infotrac_init','bad parameter',1)
115	END IF
116
117
118	! Test if config_inca is other then none for run without INCA
119	IF (type_trac/='inca' .AND. config_inca/='none') THEN
120	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
121	config_inca='none'
122	END IF
123
124
125	!-----------------------------------------------------------------------
126	!
127	! 1) Get the true number of tracers + water vapor/liquid
128	! Here true tracers (nqtrue) means declared tracers (only first order)
129	!
130	!-----------------------------------------------------------------------
131	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
132	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
133	IF(ierr.EQ.0) THEN
134	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
135	READ(90,*) nqtrue
136	ELSE
137	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
138	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
139	if (planet_type=='earth') then
140	nqtrue=4 ! Default value for Earth
141	else
142	nqtrue=1 ! Default value for other planets
143	endif
144	END IF
145	if ( planet_type=='earth') then
146	! For Earth, water vapour & liquid tracers are not in the physics
147	nbtr=nqtrue-2
148	else
149	! Other planets (for now); we have the same number of tracers
150	! in the dynamics than in the physics
151	nbtr=nqtrue
152	endif
153	ELSE ! type_trac=inca
154	#ifdef INCA
155	CALL Init_chem_inca_trac(nbtr)
156	#endif
157	nqtrue=nbtr+2
158	END IF
159
160	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
161	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
162	CALL abort_gcm('infotrac_init','Not enough tracers',1)
163	END IF
164
165	! Transfert number of tracers to Reprobus
166	IF (type_trac == 'repr') THEN
167	#ifdef REPROBUS
168	CALL Init_chem_rep_trac(nbtr)
169	#endif
170	END IF
171
172	!
173	! Allocate variables depending on nqtrue and nbtr
174	!
175	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue))
176	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
177	conv_flg(:) = 1 ! convection activated for all tracers
178	pbl_flg(:) = 1 ! boundary layer activated for all tracers
179
180	!-----------------------------------------------------------------------
181	! 2) Choix des schemas d'advection pour l'eau et les traceurs
182	!
183	! iadv = 1 schema transport type "humidite specifique LMD"
184	! iadv = 2 schema amont
185	! iadv = 14 schema Van-leer + humidite specifique
186	! Modif F.Codron
187	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
188	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
189	! iadv = 12 schema Frederic Hourdin I
190	! iadv = 13 schema Frederic Hourdin II
191	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
192	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
193	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
194	! iadv = 20 schema Slopes
195	! iadv = 30 schema Prather
196	!
197	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
198	! iq = 2 pour l'eau liquide
199	! Et eventuellement iq = 3,nqtot pour les autres traceurs
200	!
201	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
202	!------------------------------------------------------------------------
203	!
204	! Get choice of advection schema from file tracer.def or from INCA
205	!---------------------------------------------------------------------
206	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
207	IF(ierr.EQ.0) THEN
208	! Continue to read tracer.def
209	DO iq=1,nqtrue
210	READ(90,*) hadv(iq),vadv(iq),tnom_0(iq)
211	END DO
212	CLOSE(90)
213	ELSE ! Without tracer.def, set default values
214	if (planet_type=="earth") then
215	! for Earth, default is to have 4 tracers
216	hadv(1) = 14
217	vadv(1) = 14
218	tnom_0(1) = 'H2Ov'
219	hadv(2) = 10
220	vadv(2) = 10
221	tnom_0(2) = 'H2Ol'
222	hadv(3) = 10
223	vadv(3) = 10
224	tnom_0(3) = 'RN'
225	hadv(4) = 10
226	vadv(4) = 10
227	tnom_0(4) = 'PB'
228	else ! default for other planets
229	hadv(1) = 10
230	vadv(1) = 10
231	tnom_0(1) = 'dummy'
232	endif ! of if (planet_type=="earth")
233	END IF
234
235	!CR: nombre de traceurs de l eau
236	if (tnom_0(3) == 'H2Oi') then
237	nqo=3
238	else
239	nqo=2
240	endif
241
242	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
243	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
244	DO iq=1,nqtrue
245	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq)
246	END DO
247
248	ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
249	! le module de chimie fournit les noms des traceurs
250	! et les schemas d'advection associes.
251
252	#ifdef INCA
253	CALL init_transport( &
254	hadv, &
255	vadv, &
256	conv_flg, &
257	pbl_flg, &
258	solsym)
259	#endif
260	tnom_0(1)='H2Ov'
261	tnom_0(2)='H2Ol'
262
263	DO iq =3,nqtrue
264	tnom_0(iq)=solsym(iq-2)
265	END DO
266	nqo = 2
267
268	END IF ! type_trac
269
270	!-----------------------------------------------------------------------
271	!
272	! 3) Verify if advection schema 20 or 30 choosen
273	! Calculate total number of tracers needed: nqtot
274	! Allocate variables depending on total number of tracers
275	!-----------------------------------------------------------------------
276	new_iq=0
277	DO iq=1,nqtrue
278	! Add tracers for certain advection schema
279	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
280	new_iq=new_iq+1 ! no tracers added
281	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
282	new_iq=new_iq+4 ! 3 tracers added
283	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
284	new_iq=new_iq+10 ! 9 tracers added
285	ELSE
286	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
287	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
288	END IF
289	END DO
290
291	IF (new_iq /= nqtrue) THEN
292	! The choice of advection schema imposes more tracers
293	! Assigne total number of tracers
294	nqtot = new_iq
295
296	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
297	WRITE(lunout,*) 'makes it necessary to add tracers'
298	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
299	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
300
301	ELSE
302	! The true number of tracers is also the total number
303	nqtot = nqtrue
304	END IF
305
306	!
307	! Allocate variables with total number of tracers, nqtot
308	!
309	ALLOCATE(tname(nqtot), ttext(nqtot))
310	ALLOCATE(iadv(nqtot), niadv(nqtot))
311
312	!-----------------------------------------------------------------------
313	!
314	! 4) Determine iadv, long and short name
315	!
316	!-----------------------------------------------------------------------
317	new_iq=0
318	DO iq=1,nqtrue
319	new_iq=new_iq+1
320
321	! Verify choice of advection schema
322	IF (hadv(iq)==vadv(iq)) THEN
323	iadv(new_iq)=hadv(iq)
324	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
325	iadv(new_iq)=11
326	ELSE
327	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
328
329	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
330	END IF
331
332	str1=tnom_0(iq)
333	tname(new_iq)= tnom_0(iq)
334	IF (iadv(new_iq)==0) THEN
335	ttext(new_iq)=trim(str1)
336	ELSE
337	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
338	END IF
339
340	! schemas tenant compte des moments d'ordre superieur
341	str2=ttext(new_iq)
342	IF (iadv(new_iq)==20) THEN
343	DO jq=1,3
344	new_iq=new_iq+1
345	iadv(new_iq)=-20
346	ttext(new_iq)=trim(str2)//txts(jq)
347	tname(new_iq)=trim(str1)//txts(jq)
348	END DO
349	ELSE IF (iadv(new_iq)==30) THEN
350	DO jq=1,9
351	new_iq=new_iq+1
352	iadv(new_iq)=-30
353	ttext(new_iq)=trim(str2)//txtp(jq)
354	tname(new_iq)=trim(str1)//txtp(jq)
355	END DO
356	END IF
357	END DO
358
359	!
360	! Find vector keeping the correspodence between true and total tracers
361	!
362	niadv(:)=0
363	iiq=0
364	DO iq=1,nqtot
365	IF(iadv(iq).GE.0) THEN
366	! True tracer
367	iiq=iiq+1
368	niadv(iiq)=iq
369	ENDIF
370	END DO
371
372
373	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
374	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
375	DO iq=1,nqtot
376	WRITE(lunout,*) iadv(iq),niadv(iq),&
377	' ',trim(tname(iq)),' ',trim(ttext(iq))
378	END DO
379
380	!
381	! Test for advection schema.
382	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
383	!
384	DO iq=1,nqtot
385	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
386	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
387	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
388	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
389	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
390	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
391	END IF
392	END DO
393
394	!-----------------------------------------------------------------------
395	! Finalize :
396	!
397	DEALLOCATE(tnom_0, hadv, vadv)
398
399
400	END SUBROUTINE infotrac_init
401
402	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format