Context Navigation

carbon_cycle_mod.F90 @ 3998

Last change on this file since 3998 was 1444, checked in by jghattas, 14 years ago

Modifications for carbon tracers :

add possibility to read source at different frequency
add dynamic varaiable to send fluxes in interface between ORCHIDEE and LMDZ : this is still under developpment under cpp key ORCH_NEW. No compatible official ORCHIDEE version does yet exist.
add variable co2_send in restart file.
clean up and bug fixes.

File size: 18.2 KB

Rev	Line
[1227]	1	MODULE carbon_cycle_mod
[1444]	2	! Controle module for the carbon CO2 tracers :
	3	! - Identification
	4	! - Get concentrations comming from coupled model or read from file to tracers
	5	! - Calculate new RCO2 for radiation scheme
	6	! - Calculate new carbon flux for sending to coupled models (PISCES and ORCHIDEE)
	7	!
[1227]	8	! Author : Josefine GHATTAS, Patricia CADULE
	9
	10	IMPLICIT NONE
	11	SAVE
	12	PRIVATE
	13	PUBLIC :: carbon_cycle_init, carbon_cycle
	14
	15	! Variables read from parmeter file physiq.def
[1250]	16	LOGICAL, PUBLIC :: carbon_cycle_tr ! 3D transport of CO2 in the atmosphere, parameter read in conf_phys
[1249]	17	!$OMP THREADPRIVATE(carbon_cycle_tr)
[1250]	18	LOGICAL, PUBLIC :: carbon_cycle_cpl ! Coupling of CO2 fluxes between LMDZ/ORCHIDEE and LMDZ/OCEAN(PISCES)
[1249]	19	!$OMP THREADPRIVATE(carbon_cycle_cpl)
[1444]	20
[1227]	21	LOGICAL :: carbon_cycle_emis_comp=.FALSE. ! Calculation of emission compatible
[1444]	22	!$OMP THREADPRIVATE(carbon_cycle_emis_comp)
[1227]	23
[1444]	24	LOGICAL :: RCO2_inter ! RCO2 interactive : if true calculate new value RCO2 for the radiation scheme
	25	!$OMP THREADPRIVATE(RCO2_inter)
	26
[1227]	27	! Scalare values when no transport, from physiq.def
	28	REAL :: fos_fuel_s ! carbon_cycle_fos_fuel dans physiq.def
[1250]	29	!$OMP THREADPRIVATE(fos_fuel_s)
[1227]	30	REAL :: emis_land_s ! not yet implemented
[1250]	31	!$OMP THREADPRIVATE(emis_land_s)
[1227]	32
[1444]	33	REAL :: airetot ! Total area of the earth surface
	34	!$OMP THREADPRIVATE(airetot)
[1250]	35
[1444]	36	INTEGER :: ntr_co2 ! Number of tracers concerning the carbon cycle
	37	!$OMP THREADPRIVATE(ntr_co2)
	38
	39	! fco2_ocn_day : flux CO2 from ocean for 1 day (cumulated) [gC/m2/d]. Allocation and initalization done in cpl_mod
	40	REAL, DIMENSION(:), ALLOCATABLE, PUBLIC :: fco2_ocn_day
[1250]	41	!$OMP THREADPRIVATE(fco2_ocn_day)
[1444]	42
[1227]	43	REAL, DIMENSION(:), ALLOCATABLE :: fco2_land_day ! flux CO2 from land for 1 day (cumulated) [gC/m2/d]
[1250]	44	!$OMP THREADPRIVATE(fco2_land_day)
[1227]	45	REAL, DIMENSION(:), ALLOCATABLE :: fco2_lu_day ! Emission from land use change for 1 day (cumulated) [gC/m2/d]
[1250]	46	!$OMP THREADPRIVATE(fco2_lu_day)
[1227]	47
[1444]	48	REAL, DIMENSION(:,:), ALLOCATABLE :: dtr_add ! Tracer concentration to be injected
	49	!$OMP THREADPRIVATE(dtr_add)
	50
	51	! Following 2 fields will be allocated and initialized in surf_land_orchidee
[1227]	52	REAL, DIMENSION(:), ALLOCATABLE, PUBLIC :: fco2_land_inst ! flux CO2 from land at one time step
[1250]	53	!$OMP THREADPRIVATE(fco2_land_inst)
[1227]	54	REAL, DIMENSION(:), ALLOCATABLE, PUBLIC :: fco2_lu_inst ! Emission from land use change at one time step
[1250]	55	!$OMP THREADPRIVATE(fco2_lu_inst)
[1227]	56
	57	! Calculated co2 field to be send to the ocean via the coupler and to ORCHIDEE
[1444]	58	REAL, DIMENSION(:), ALLOCATABLE, PUBLIC :: co2_send ! Field allocated in phyetat0
[1250]	59	!$OMP THREADPRIVATE(co2_send)
[1227]	60
[1444]	61
	62	TYPE, PUBLIC :: co2_trac_type
	63	CHARACTER(len = 8) :: name ! Tracer name in tracer.def
	64	INTEGER :: id ! Index in total tracer list, tr_seri
	65	CHARACTER(len=30) :: file ! File name
	66	LOGICAL :: cpl ! True if this tracers is coupled from ORCHIDEE or PISCES.
	67	! False if read from file.
	68	INTEGER :: updatefreq ! Frequence to inject in second
	69	INTEGER :: readstep ! Actual time step to read in file
	70	LOGICAL :: updatenow ! True if this tracer should be updated this time step
	71	END TYPE co2_trac_type
	72	INTEGER,PARAMETER :: maxco2trac=5 ! Maximum number of different CO2 fluxes
	73	TYPE(co2_trac_type), DIMENSION(maxco2trac) :: co2trac
	74
[1227]	75	CONTAINS
	76
[1444]	77	SUBROUTINE carbon_cycle_init(tr_seri, pdtphys, aerosol, radio)
	78	! This subroutine is called from traclmdz_init, only at first timestep.
	79	! - Read controle parameters from .def input file
	80	! - Search for carbon tracers and set default values
	81	! - Allocate variables
	82	! - Test for compatibility
	83
[1227]	84	USE dimphy
[1444]	85	USE comgeomphy
	86	USE mod_phys_lmdz_transfert_para
[1227]	87	USE infotrac
	88	USE IOIPSL
	89	USE surface_data, ONLY : ok_veget, type_ocean
[1444]	90	USE phys_cal_mod, ONLY : mth_len
[1227]	91
	92	IMPLICIT NONE
	93	INCLUDE "clesphys.h"
	94	INCLUDE "iniprint.h"
	95
	96	! Input argument
	97	REAL,DIMENSION(klon,klev,nbtr),INTENT(IN) :: tr_seri ! Concentration Traceur [U/KgA]
[1444]	98	REAL,INTENT(IN) :: pdtphys ! length of time step in physiq (sec)
[1227]	99
	100	! InOutput arguments
	101	LOGICAL,DIMENSION(nbtr), INTENT(INOUT) :: aerosol
	102	LOGICAL,DIMENSION(nbtr), INTENT(INOUT) :: radio
	103
	104	! Local variables
[1444]	105	INTEGER :: ierr, it, iiq, itc
	106	INTEGER :: teststop
[1227]	107
	108
	109
[1444]	110	! 1) Read controle parameters from .def input file
	111	! ------------------------------------------------
	112	! Read fosil fuel value if no transport
	113	IF (.NOT. carbon_cycle_tr) THEN
[1227]	114	fos_fuel_s = 0.
	115	CALL getin ('carbon_cycle_fos_fuel',fos_fuel_s)
	116	WRITE(lunout,*) 'carbon_cycle_fos_fuel = ', fos_fuel_s
	117	END IF
	118
	119
[1444]	120	! Read parmeter for calculation compatible emission
	121	IF (.NOT. carbon_cycle_tr) THEN
	122	carbon_cycle_emis_comp=.FALSE.
	123	CALL getin('carbon_cycle_emis_comp',carbon_cycle_emis_comp)
	124	WRITE(lunout,*) 'carbon_cycle_emis_comp = ',carbon_cycle_emis_comp
	125	IF (carbon_cycle_emis_comp) THEN
	126	CALL abort_gcm('carbon_cycle_init', 'carbon_cycle_emis_comp option not yet implemented!!',1)
	127	END IF
	128	END IF
[1227]	129
[1444]	130	! Read parameter for interactive calculation of the CO2 value for the radiation scheme
	131	RCO2_inter=.FALSE.
	132	CALL getin('RCO2_inter',RCO2_inter)
	133	WRITE(lunout,*) 'RCO2_inter = ', RCO2_inter
	134	IF (RCO2_inter) THEN
	135	WRITE(lunout,*) 'RCO2 will be recalculated once a day'
	136	WRITE(lunout,*) 'RCO2 initial = ', RCO2
	137	END IF
[1227]	138
[1444]	139
	140	! 2) Search for carbon tracers and set default values
	141	! ---------------------------------------------------
	142	itc=0
	143	DO it=1,nbtr
	144	iiq=niadv(it+2)
[1227]	145
[1444]	146	SELECT CASE(tname(iiq))
	147	CASE("fCO2_ocn")
	148	itc = itc + 1
	149	co2trac(itc)%name='fCO2_ocn'
	150	co2trac(itc)%id=it
	151	co2trac(itc)%file='fl_co2_ocean.nc'
	152	IF (carbon_cycle_cpl .AND. type_ocean=='couple') THEN
	153	co2trac(itc)%cpl=.TRUE.
	154	co2trac(itc)%updatefreq = 86400 ! Once a day as the coupling with OASIS/PISCES
	155	ELSE
	156	co2trac(itc)%cpl=.FALSE.
	157	co2trac(itc)%updatefreq = 86400*mth_len ! Once a month
[1227]	158	END IF
[1444]	159	CASE("fCO2_land")
	160	itc = itc + 1
	161	co2trac(itc)%name='fCO2_land'
	162	co2trac(itc)%id=it
	163	co2trac(itc)%file='fl_co2_land.nc'
	164	IF (carbon_cycle_cpl .AND. ok_veget) THEN
	165	co2trac(itc)%cpl=.TRUE.
	166	co2trac(itc)%updatefreq = INT(pdtphys) ! Each timestep as the coupling with ORCHIDEE
	167	ELSE
	168	co2trac(itc)%cpl=.FALSE.
	169	! co2trac(itc)%updatefreq = 10800 ! 10800sec = 3H
	170	co2trac(itc)%updatefreq = 86400*mth_len ! Once a month
	171	END IF
	172	CASE("fCO2_land_use")
	173	itc = itc + 1
	174	co2trac(itc)%name='fCO2_land_use'
	175	co2trac(itc)%id=it
	176	co2trac(itc)%file='fl_co2_land_use.nc'
	177	IF (carbon_cycle_cpl .AND. ok_veget) THEN
	178	co2trac(it)%cpl=.TRUE.
	179	co2trac(itc)%updatefreq = INT(pdtphys) ! Each timestep as the coupling with ORCHIDEE
	180	ELSE
	181	co2trac(itc)%cpl=.FALSE.
	182	co2trac(itc)%updatefreq = 10800 ! 10800sec = 3H
	183	END IF
	184	CASE("fCO2_fos_fuel")
	185	itc = itc + 1
	186	co2trac(itc)%name='fCO2_fos_fuel'
	187	co2trac(itc)%id=it
	188	co2trac(itc)%file='fossil_fuel.nc'
	189	co2trac(itc)%cpl=.FALSE. ! This tracer always read from file
	190	! co2trac(itc)%updatefreq = 86400 ! 86400sec = 24H Cadule case
	191	co2trac(itc)%updatefreq = 86400*mth_len ! Once a month
	192	CASE("fCO2_bbg")
	193	itc = itc + 1
	194	co2trac(itc)%name='fCO2_bbg'
	195	co2trac(itc)%id=it
	196	co2trac(itc)%file='fl_co2_bbg.nc'
	197	co2trac(itc)%cpl=.FALSE. ! This tracer always read from file
	198	co2trac(itc)%updatefreq = 86400*mth_len ! Once a month
	199	CASE("fCO2")
	200	! fCO2 : One tracer transporting the total CO2 flux
	201	itc = itc + 1
	202	co2trac(itc)%name='fCO2'
	203	co2trac(itc)%id=it
	204	co2trac(itc)%file='fl_co2.nc'
	205	IF (carbon_cycle_cpl) THEN
	206	co2trac(itc)%cpl=.TRUE.
	207	ELSE
	208	co2trac(itc)%cpl=.FALSE.
	209	END IF
	210	co2trac(itc)%updatefreq = 86400
	211	! DOES THIS WORK ???? Problematic due to implementation of the coupled fluxes...
	212	CALL abort_gcm('carbon_cycle_init','transport of total CO2 has to be implemented and tested',1)
	213	END SELECT
	214	END DO
[1227]	215
[1444]	216	! Total number of carbon CO2 tracers
	217	ntr_co2 = itc
	218
	219	! Definition of control varaiables for the tracers
	220	DO it=1,ntr_co2
	221	aerosol(co2trac(it)%id) = .FALSE.
	222	radio(co2trac(it)%id) = .FALSE.
	223	END DO
	224
	225	! Vector indicating which timestep to read for each tracer
	226	! Always start read in the beginning of the file
	227	co2trac(:)%readstep = 0
	228
[1227]	229
[1444]	230	! 3) Allocate variables
	231	! ---------------------
	232	! Allocate vector for storing fluxes to inject
	233	ALLOCATE(dtr_add(klon,maxco2trac), stat=ierr)
	234	IF (ierr /= 0) CALL abort_gcm('carbon_cycle_init', 'pb in allocation 11',1)
	235
	236	! Allocate variables for cumulating fluxes from ORCHIDEE
	237	IF (RCO2_inter) THEN
	238	IF (.NOT. carbon_cycle_tr .AND. carbon_cycle_cpl) THEN
[1227]	239	ALLOCATE(fco2_land_day(klon), stat=ierr)
[1444]	240	IF (ierr /= 0) CALL abort_gcm('carbon_cycle_init', 'pb in allocation 2',1)
	241	fco2_land_day(1:klon) = 0.
	242
[1227]	243	ALLOCATE(fco2_lu_day(klon), stat=ierr)
[1444]	244	IF (ierr /= 0) CALL abort_gcm('carbon_cycle_init', 'pb in allocation 3',1)
	245	fco2_lu_day(1:klon) = 0.
[1227]	246	END IF
	247	END IF
	248
[1444]	249
	250	! 4) Test for compatibility
	251	! -------------------------
	252	! IF (carbon_cycle_cpl .AND. type_ocean/='couple') THEN
	253	! WRITE(lunout,*) 'Coupling with ocean model is needed for carbon_cycle_cpl'
	254	! CALL abort_gcm('carbon_cycle_init', 'coupled ocean is needed for carbon_cycle_cpl',1)
	255	! END IF
	256	!
	257	! IF (carbon_cycle_cpl .AND..NOT. ok_veget) THEN
	258	! WRITE(lunout,*) 'Coupling with surface land model ORCHDIEE is needed for carbon_cycle_cpl'
	259	! CALL abort_gcm('carbon_cycle_init', 'ok_veget is needed for carbon_cycle_cpl',1)
	260	! END IF
	261
	262	! Compiler test : following should never happen
	263	teststop=0
	264	DO it=1,teststop
	265	CALL abort_gcm('carbon_cycle_init', 'Entering loop from 1 to 0',1)
	266	END DO
	267
	268	IF (ntr_co2==0) THEN
	269	! No carbon tracers found in tracer.def. It is not possible to do carbon cycle
	270	WRITE(lunout,*) 'No carbon tracers found in tracer.def. Not ok with carbon_cycle_tr and/or carbon_cycle_cp'
	271	CALL abort_gcm('carbon_cycle_init', 'No carbon tracers found in tracer.def',1)
[1227]	272	END IF
[1444]	273
	274	! 5) Calculate total area of the earth surface
	275	! --------------------------------------------
	276	CALL reduce_sum(SUM(airephy),airetot)
	277	CALL bcast(airetot)
[1227]	278
	279	END SUBROUTINE carbon_cycle_init
	280
[1444]	281
	282	SUBROUTINE carbon_cycle(nstep, pdtphys, pctsrf, tr_seri, source)
	283	! Subroutine for injection of co2 in the tracers
[1227]	284	!
[1444]	285	! - Find out if it is time to update
	286	! - Get tracer from coupled model or from file
	287	! - Calculate new RCO2 value for the radiation scheme
	288	! - Calculate CO2 flux to send to ocean and land models (PISCES and ORCHIDEE)
[1227]	289
	290	USE infotrac
	291	USE dimphy
[1444]	292	USE mod_phys_lmdz_transfert_para
[1227]	293	USE phys_cal_mod, ONLY : mth_cur, mth_len
	294	USE phys_cal_mod, ONLY : day_cur
	295	USE comgeomphy
	296
	297	IMPLICIT NONE
	298
	299	INCLUDE "clesphys.h"
	300	INCLUDE "indicesol.h"
[1444]	301	INCLUDE "iniprint.h"
	302	INCLUDE "YOMCST.h"
[1227]	303
	304	! In/Output arguments
	305	INTEGER,INTENT(IN) :: nstep ! time step in physiq
	306	REAL,INTENT(IN) :: pdtphys ! length of time step in physiq (sec)
[1444]	307	REAL,DIMENSION(klon,nbsrf),INTENT(IN) :: pctsrf ! Surface fraction
	308	REAL, DIMENSION(klon,klev,nbtr), INTENT(INOUT) :: tr_seri ! All tracers
	309	REAL, DIMENSION(klon,nbtr), INTENT(INOUT) :: source ! Source for all tracers
[1227]	310
	311	! Local variables
[1444]	312	INTEGER :: it
[1227]	313	LOGICAL :: newmonth ! indicates if a new month just started
	314	LOGICAL :: newday ! indicates if a new day just started
	315	LOGICAL :: endday ! indicated if last time step in a day
	316
	317	REAL, PARAMETER :: fact=1.E-15/2.12 ! transformation factor from gC/m2/day => ppm/m2/day
[1444]	318	REAL, DIMENSION(klon) :: fco2_tmp
[1227]	319	REAL :: sumtmp
	320	REAL :: delta_co2_ppm
	321
	322
[1444]	323	! 1) Calculate logicals indicating if it is a new month, new day or the last time step in a day (end day)
	324	! -------------------------------------------------------------------------------------------------------
	325
[1227]	326	newday = .FALSE.; endday = .FALSE.; newmonth = .FALSE.
	327
	328	IF (MOD(nstep,INT(86400./pdtphys))==1) newday=.TRUE.
	329	IF (MOD(nstep,INT(86400./pdtphys))==0) endday=.TRUE.
	330	IF (newday .AND. day_cur==1) newmonth=.TRUE.
[1444]	331
	332	! 2) For each carbon tracer find out if it is time to inject (update)
	333	! --------------------------------------------------------------------
	334	DO it = 1, ntr_co2
	335	IF ( MOD(nstep,INT(co2trac(it)%updatefreq/pdtphys)) == 1 ) THEN
	336	co2trac(it)%updatenow = .TRUE.
	337	ELSE
	338	co2trac(it)%updatenow = .FALSE.
[1227]	339	END IF
[1444]	340	END DO
[1227]	341
[1444]	342	! 3) Get tracer update
	343	! --------------------------------------
	344	DO it = 1, ntr_co2
	345	IF ( co2trac(it)%updatenow ) THEN
	346	IF ( co2trac(it)%cpl ) THEN
	347	! Get tracer from coupled model
	348	SELECT CASE(co2trac(it)%name)
	349	CASE('fCO2_land') ! from ORCHIDEE
	350	dtr_add(:,it) = fco2_land_inst(:)pctsrf(:,is_ter)fact ! [ppm/m2/day]
	351	CASE('fCO2_land_use') ! from ORCHIDEE
	352	dtr_add(:,it) = fco2_lu_inst(:) pctsrf(:,is_ter)fact ! [ppm/m2/day]
	353	CASE('fCO2_ocn') ! from PISCES
	354	dtr_add(:,it) = fco2_ocn_day(:) pctsrf(:,is_oce)fact ! [ppm/m2/day]
	355	CASE DEFAULT
	356	WRITE(lunout,*) 'Error with tracer ',co2trac(it)%name
	357	CALL abort_gcm('carbon_cycle', 'No coupling implemented for this tracer',1)
	358	END SELECT
	359	ELSE
	360	! Read tracer from file
	361	co2trac(it)%readstep = co2trac(it)%readstep + 1 ! increment time step in file
	362	! Patricia CALL read_map2D(co2trac(it)%file,'fco2',co2trac(it)%readstep,.FALSE.,dtr_add(:,it))
	363	CALL read_map2D(co2trac(it)%file,'fco2',co2trac(it)%readstep,.TRUE.,dtr_add(:,it))
[1227]	364
[1444]	365	! Converte from kgC/m2/h to kgC/m2/s
	366	dtr_add(:,it) = dtr_add(:,it)/3600
	367	! Add individual treatment of values read from file
	368	SELECT CASE(co2trac(it)%name)
	369	CASE('fCO2_land')
	370	dtr_add(:,it) = dtr_add(:,it) *pctsrf(:,is_ter)
	371	CASE('fCO2_land_use')
	372	dtr_add(:,it) = dtr_add(:,it) *pctsrf(:,is_ter)
	373	CASE('fCO2_ocn')
	374	dtr_add(:,it) = dtr_add(:,it) *pctsrf(:,is_oce)
	375	! Patricia :
	376	! CASE('fCO2_fos_fuel')
	377	! dtr_add(:,it) = dtr_add(:,it)/mth_len
	378	! co2trac(it)%readstep = 0 ! Always read same value for fossil fuel(Cadule case)
	379	END SELECT
[1227]	380	END IF
[1444]	381	END IF
	382	END DO
[1227]	383
[1444]	384	! 4) Update co2 tracers :
	385	! Loop over all carbon tracers and add source
	386	! ------------------------------------------------------------------
	387	IF (carbon_cycle_tr) THEN
	388	DO it = 1, ntr_co2
	389	IF (.FALSE.) THEN
	390	tr_seri(1:klon,1,co2trac(it)%id) = tr_seri(1:klon,1,co2trac(it)%id) + dtr_add(1:klon,it)
	391	source(1:klon,co2trac(it)%id) = 0.
	392	ELSE
	393	source(1:klon,co2trac(it)%id) = dtr_add(1:klon,it)
[1227]	394	END IF
[1444]	395	END DO
[1227]	396	END IF
	397
	398
[1444]	399	! 5) Calculations for new CO2 value for the radiation scheme(instead of reading value from .def)
	400	! ----------------------------------------------------------------------------------------------
	401	IF (RCO2_inter) THEN
	402	! Cumulate fluxes from ORCHIDEE at each timestep
	403	IF (.NOT. carbon_cycle_tr .AND. carbon_cycle_cpl) THEN
	404	IF (newday) THEN ! Reset cumulative variables once a day
	405	fco2_land_day(1:klon) = 0.
	406	fco2_lu_day(1:klon) = 0.
	407	END IF
	408	fco2_land_day(1:klon) = fco2_land_day(1:klon) + fco2_land_inst(1:klon) ![gC/m2/day]
	409	fco2_lu_day(1:klon) = fco2_lu_day(1:klon) + fco2_lu_inst(1:klon) ![gC/m2/day]
	410	END IF
[1227]	411
[1444]	412	! At the end of a new day, calculate a mean scalare value of CO2
	413	! JG : Ici on utilise uniquement le traceur du premier couche du modele. Est-ce que c'est correcte ?
	414	IF (endday) THEN
[1227]	415
[1444]	416	IF (carbon_cycle_tr) THEN
	417	! Sum all co2 tracers to get the total delta CO2 flux
	418	fco2_tmp(:) = 0.
	419	DO it = 1, ntr_co2
	420	fco2_tmp(1:klon) = fco2_tmp(1:klon) + tr_seri(1:klon,1,co2trac(it)%id)
	421	END DO
[1227]	422
[1444]	423	ELSE IF (carbon_cycle_cpl) THEN ! no carbon_cycle_tr
	424	! Sum co2 fluxes comming from coupled models and parameter for fossil fuel
	425	fco2_tmp(1:klon) = fos_fuel_s + ((fco2_lu_day(1:klon) + fco2_land_day(1:klon))*pctsrf(1:klon,is_ter) &
	426	+ fco2_ocn_day(:)pctsrf(:,is_oce)) fact
[1227]	427	END IF
	428
[1444]	429	! Calculate a global mean value of delta CO2 flux
	430	fco2_tmp(1:klon) = fco2_tmp(1:klon) * airephy(1:klon)
[1227]	431	CALL reduce_sum(SUM(fco2_tmp),sumtmp)
[1444]	432	CALL bcast(sumtmp)
[1227]	433	delta_co2_ppm = sumtmp/airetot
	434
[1444]	435	! Add initial value for co2_ppm and delta value
	436	co2_ppm = co2_ppm0 + delta_co2_ppm
	437
	438	! Transformation of atmospheric CO2 concentration for the radiation code
	439	RCO2 = co2_ppm * 1.0e-06 * 44.011/28.97
	440
	441	WRITE(lunout,*) 'RCO2 is now updated! RCO2 = ', RCO2
	442	END IF ! endday
[1227]	443
[1444]	444	END IF ! RCO2_inter
[1227]	445
	446
[1444]	447	! 6) Calculate CO2 flux to send to ocean and land models : PISCES and ORCHIDEE
	448	! ----------------------------------------------------------------------------
	449	IF (carbon_cycle_cpl) THEN
	450
[1227]	451	IF (carbon_cycle_tr) THEN
[1444]	452	! Sum all co2 tracers to get the total delta CO2 flux at first model layer
	453	fco2_tmp(:) = 0.
	454	DO it = 1, ntr_co2
	455	fco2_tmp(1:klon) = fco2_tmp(1:klon) + tr_seri(1:klon,1,co2trac(it)%id)
	456	END DO
	457	co2_send(1:klon) = fco2_tmp(1:klon) + co2_ppm0
[1227]	458	ELSE
	459	! Send a scalare value in 2D variable to ocean and land model (PISCES and ORCHIDEE)
[1444]	460	co2_send(1:klon) = co2_ppm
[1227]	461	END IF
	462
	463	END IF
	464
	465	END SUBROUTINE carbon_cycle
	466
	467	END MODULE carbon_cycle_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format