Context Navigation

cpl_mod.F90 @ 2045

Last change on this file since 2045 was 1785, checked in by Ehouarn Millour, 11 years ago

Transformation de l'include indicesol.h en un module indice_sol_mod et modification des appels dans tous les fichiers concernés.
Aucun changement des résultats ni des sorties du modèle vs 1784.
UG

...................................................

Replacement of the indicesol.h include by a module named indice_sol_mod. Modification of the calls in every affected files.
Results and outputs of simulations are unchanged in comparison with rev 1784.
UG

Property svn:eol-style set to native
Property svn:executable set to *
Property svn:keywords set to Author Date Id Revision

File size: 55.3 KB

Line
1	!
2	MODULE cpl_mod
3	!
4	! This module excahanges and transforms all fields that should be recieved or sent to
5	! coupler. The transformation of the fields are done from the grid 1D-array in phylmd
6	! to the regular 2D grid accepted by the coupler. Cumulation of the fields for each
7	! timestep is done in here.
8	!
9	! Each type of surface that recevie fields from the coupler have a subroutine named
10	! cpl_receive_XXX_fields and each surface that have fields to be sent to the coupler
11	! have a subroutine named cpl_send_XXX_fields.
12	!
13	!*************************************************************************************
14
15	! Use statements
16	!*************************************************************************************
17	USE dimphy, ONLY : klon
18	USE mod_phys_lmdz_para
19	USE ioipsl
20	USE iophy
21
22	! The module oasis is always used. Without the cpp key CPP_COUPLE only the parameters
23	! in the module are compiled and not the subroutines.
24	USE oasis
25	USE write_field_phy
26	USE control_mod
27
28
29	! Global attributes
30	!*************************************************************************************
31	IMPLICIT NONE
32	PRIVATE
33
34	! All subroutine are public except cpl_send_all
35	PUBLIC :: cpl_init, cpl_receive_frac, cpl_receive_ocean_fields, cpl_receive_seaice_fields, &
36	cpl_send_ocean_fields, cpl_send_seaice_fields, cpl_send_land_fields, &
37	cpl_send_landice_fields, gath2cpl
38
39
40	! Declaration of module variables
41	!*************************************************************************************
42	! variable for coupling period
43	INTEGER, SAVE :: nexca
44	!$OMP THREADPRIVATE(nexca)
45
46	! variables for cumulating fields during a coupling periode :
47	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_sols, cpl_nsol, cpl_rain
48	!$OMP THREADPRIVATE(cpl_sols,cpl_nsol,cpl_rain)
49	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_snow, cpl_evap, cpl_tsol
50	!$OMP THREADPRIVATE(cpl_snow,cpl_evap,cpl_tsol)
51	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_fder, cpl_albe, cpl_taux, cpl_tauy
52	!$OMP THREADPRIVATE(cpl_fder,cpl_albe,cpl_taux,cpl_tauy)
53	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp
54	!$OMP THREADPRIVATE(cpl_windsp)
55	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_taumod
56	!$OMP THREADPRIVATE(cpl_taumod)
57	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co2
58	!$OMP THREADPRIVATE(cpl_atm_co2)
59	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_rriv2D, cpl_rcoa2D, cpl_rlic2D
60	!$OMP THREADPRIVATE(cpl_rriv2D,cpl_rcoa2D,cpl_rlic2D)
61
62	! variables read from coupler :
63	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sst ! sea surface temperature
64	!$OMP THREADPRIVATE(read_sst)
65	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sit ! sea ice temperature
66	!$OMP THREADPRIVATE(read_sit)
67	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sic ! sea ice fraction
68	!$OMP THREADPRIVATE(read_sic)
69	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_alb_sic ! albedo at sea ice
70	!$OMP THREADPRIVATE(read_alb_sic)
71	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_u0, read_v0 ! ocean surface current
72	!$OMP THREADPRIVATE(read_u0,read_v0)
73	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_co2 ! ocean co2 flux
74	!$OMP THREADPRIVATE(read_co2)
75	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: unity
76	!$OMP THREADPRIVATE(unity)
77	INTEGER, SAVE :: nidct, nidcs
78	!$OMP THREADPRIVATE(nidct,nidcs)
79
80	! variables to be sent to the coupler
81	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_sols2D, cpl_nsol2D, cpl_rain2D
82	!$OMP THREADPRIVATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D)
83	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_snow2D, cpl_evap2D, cpl_tsol2D
84	!$OMP THREADPRIVATE(cpl_snow2D, cpl_evap2D, cpl_tsol2D)
85	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_fder2D, cpl_albe2D
86	!$OMP THREADPRIVATE(cpl_fder2D, cpl_albe2D)
87	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taux2D, cpl_tauy2D
88	!$OMP THREADPRIVATE(cpl_taux2D, cpl_tauy2D)
89	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taumod2D
90	!$OMP THREADPRIVATE(cpl_taumod2D)
91	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp2D
92	!$OMP THREADPRIVATE(cpl_windsp2D)
93	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co22D
94	!$OMP THREADPRIVATE(cpl_atm_co22D)
95
96	CONTAINS
97	!
98	!************************************************************************************
99	!
100	SUBROUTINE cpl_init(dtime, rlon, rlat)
101	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day
102	USE surface_data
103	USE indice_sol_mod
104
105	INCLUDE "dimensions.h"
106	INCLUDE "temps.h"
107	INCLUDE "iniprint.h"
108
109	! Input arguments
110	!*************************************************************************************
111	REAL, INTENT(IN) :: dtime
112	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
113
114	! Local variables
115	!*************************************************************************************
116	INTEGER :: error, sum_error, ig, i
117	INTEGER :: jf, nhoridct
118	INTEGER :: nhoridcs
119	INTEGER :: idtime
120	INTEGER :: idayref
121	INTEGER :: npas ! only for OASIS2
122	REAL :: zjulian
123	REAL, DIMENSION(iim,jjm+1) :: zx_lon, zx_lat
124	CHARACTER(len = 20) :: modname = 'cpl_init'
125	CHARACTER(len = 80) :: abort_message
126	CHARACTER(len=80) :: clintocplnam, clfromcplnam
127
128	!*************************************************************************************
129	! Calculate coupling period
130	!
131	!*************************************************************************************
132
133	npas = itaufin/ iphysiq
134	nexca = 86400 / dtime
135	WRITE(lunout,*)' ##### Ocean couple #####'
136	WRITE(lunout,*)' Valeurs des pas de temps'
137	WRITE(lunout,*)' npas = ', npas
138	WRITE(lunout,*)' nexca = ', nexca
139
140	!*************************************************************************************
141	! Allocate variables
142	!
143	!*************************************************************************************
144	error = 0
145	sum_error = 0
146
147	ALLOCATE(unity(klon), stat = error)
148	sum_error = sum_error + error
149	ALLOCATE(cpl_sols(klon,2), stat = error)
150	sum_error = sum_error + error
151	ALLOCATE(cpl_nsol(klon,2), stat = error)
152	sum_error = sum_error + error
153	ALLOCATE(cpl_rain(klon,2), stat = error)
154	sum_error = sum_error + error
155	ALLOCATE(cpl_snow(klon,2), stat = error)
156	sum_error = sum_error + error
157	ALLOCATE(cpl_evap(klon,2), stat = error)
158	sum_error = sum_error + error
159	ALLOCATE(cpl_tsol(klon,2), stat = error)
160	sum_error = sum_error + error
161	ALLOCATE(cpl_fder(klon,2), stat = error)
162	sum_error = sum_error + error
163	ALLOCATE(cpl_albe(klon,2), stat = error)
164	sum_error = sum_error + error
165	ALLOCATE(cpl_taux(klon,2), stat = error)
166	sum_error = sum_error + error
167	ALLOCATE(cpl_tauy(klon,2), stat = error)
168	sum_error = sum_error + error
169	ALLOCATE(cpl_windsp(klon,2), stat = error)
170	sum_error = sum_error + error
171	ALLOCATE(cpl_taumod(klon,2), stat = error)
172	sum_error = sum_error + error
173	ALLOCATE(cpl_rriv2D(iim,jj_nb), stat=error)
174	sum_error = sum_error + error
175	ALLOCATE(cpl_rcoa2D(iim,jj_nb), stat=error)
176	sum_error = sum_error + error
177	ALLOCATE(cpl_rlic2D(iim,jj_nb), stat=error)
178	sum_error = sum_error + error
179	ALLOCATE(read_sst(iim, jj_nb), stat = error)
180	sum_error = sum_error + error
181	ALLOCATE(read_sic(iim, jj_nb), stat = error)
182	sum_error = sum_error + error
183	ALLOCATE(read_sit(iim, jj_nb), stat = error)
184	sum_error = sum_error + error
185	ALLOCATE(read_alb_sic(iim, jj_nb), stat = error)
186	sum_error = sum_error + error
187	ALLOCATE(read_u0(iim, jj_nb), stat = error)
188	sum_error = sum_error + error
189	ALLOCATE(read_v0(iim, jj_nb), stat = error)
190	sum_error = sum_error + error
191
192	IF (carbon_cycle_cpl) THEN
193	ALLOCATE(read_co2(iim, jj_nb), stat = error)
194	sum_error = sum_error + error
195	ALLOCATE(cpl_atm_co2(klon,2), stat = error)
196	sum_error = sum_error + error
197
198	! Allocate variable in carbon_cycle_mod
199	ALLOCATE(fco2_ocn_day(klon), stat = error)
200	sum_error = sum_error + error
201	END IF
202
203	IF (sum_error /= 0) THEN
204	abort_message='Pb allocation variables couplees'
205	CALL abort_gcm(modname,abort_message,1)
206	ENDIF
207	!*************************************************************************************
208	! Initialize the allocated varaibles
209	!
210	!*************************************************************************************
211	DO ig = 1, klon
212	unity(ig) = ig
213	ENDDO
214
215	!*************************************************************************************
216	! Initialize coupling
217	!
218	!*************************************************************************************
219	idtime = INT(dtime)
220	#ifdef CPP_COUPLE
221	CALL inicma
222	#endif
223
224	!*************************************************************************************
225	! initialize NetCDF output
226	!
227	!*************************************************************************************
228	IF (is_sequential) THEN
229	idayref = day_ini
230	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
231	CALL gr_fi_ecrit(1,klon,iim,jjm+1,rlon,zx_lon)
232	DO i = 1, iim
233	zx_lon(i,1) = rlon(i+1)
234	zx_lon(i,jjm+1) = rlon(i+1)
235	ENDDO
236	CALL gr_fi_ecrit(1,klon,iim,jjm+1,rlat,zx_lat)
237	clintocplnam="cpl_atm_tauflx"
238	CALL histbeg(clintocplnam, iim,zx_lon(:,1),jjm+1,zx_lat(1,:),&
239	1,iim,1,jjm+1, itau_phy,zjulian,dtime,nhoridct,nidct)
240	! no vertical axis
241	CALL histdef(nidct, 'tauxe','tauxe', &
242	"-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
243	CALL histdef(nidct, 'tauyn','tauyn', &
244	"-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
245	CALL histdef(nidct, 'tmp_lon','tmp_lon', &
246	"-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
247	CALL histdef(nidct, 'tmp_lat','tmp_lat', &
248	"-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
249	DO jf=1,maxsend
250	IF (infosend(i)%action) THEN
251	CALL histdef(nidct, infosend(i)%name ,infosend(i)%name , &
252	"-",iim, jjm+1, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
253	ENDIF
254	END DO
255	CALL histend(nidct)
256	CALL histsync(nidct)
257
258	clfromcplnam="cpl_atm_sst"
259	CALL histbeg(clfromcplnam, iim,zx_lon(:,1),jjm+1,zx_lat(1,:),1,iim,1,jjm+1, &
260	0,zjulian,dtime,nhoridcs,nidcs)
261	! no vertical axis
262	DO jf=1,maxrecv
263	IF (inforecv(i)%action) THEN
264	CALL histdef(nidcs,inforecv(i)%name ,inforecv(i)%name , &
265	"-",iim, jjm+1, nhoridcs, 1, 1, 1, -99, 32, "inst", dtime,dtime)
266	ENDIF
267	END DO
268	CALL histend(nidcs)
269	CALL histsync(nidcs)
270
271	ENDIF ! is_sequential
272
273
274	!*************************************************************************************
275	! compatibility test
276	!
277	!*************************************************************************************
278	IF (carbon_cycle_cpl .AND. version_ocean=='opa8') THEN
279	abort_message='carbon_cycle_cpl does not work with opa8'
280	CALL abort_gcm(modname,abort_message,1)
281	END IF
282
283	END SUBROUTINE cpl_init
284
285	!
286	!*************************************************************************************
287	!
288
289	SUBROUTINE cpl_receive_frac(itime, dtime, pctsrf, is_modified)
290	! This subroutine receives from coupler for both ocean and seaice
291	! 4 fields : read_sst, read_sic, read_sit and read_alb_sic.
292	! The new sea-ice-land-landice fraction is returned. The others fields
293	! are stored in this module.
294	USE surface_data
295	USE phys_state_var_mod, ONLY : rlon, rlat
296	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
297	USE indice_sol_mod
298
299	INCLUDE "temps.h"
300	INCLUDE "iniprint.h"
301	INCLUDE "YOMCST.h"
302	INCLUDE "dimensions.h"
303
304	! Arguments
305	!************************************************************************************
306	INTEGER, INTENT(IN) :: itime
307	REAL, INTENT(IN) :: dtime
308	REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: pctsrf
309	LOGICAL, INTENT(OUT) :: is_modified
310
311	! Local variables
312	!************************************************************************************
313	INTEGER :: j, i, time_sec
314	INTEGER :: itau_w
315	INTEGER, DIMENSION(iim*(jjm+1)) :: ndexcs
316	CHARACTER(len = 20) :: modname = 'cpl_receive_frac'
317	CHARACTER(len = 80) :: abort_message
318	REAL, DIMENSION(klon) :: read_sic1D
319	REAL, DIMENSION(iim,jj_nb,maxrecv) :: tab_read_flds
320	REAL, DIMENSION(klon,nbsrf) :: pctsrf_old
321	REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi
322	REAL, DIMENSION(iim, jj_nb) :: tmp_lon, tmp_lat
323	REAL, DIMENSION(iim, jj_nb) :: tmp_r0
324
325	!*************************************************************************************
326	! Start calculation
327	! Get fields from coupler
328	!
329	!*************************************************************************************
330
331	is_modified=.FALSE.
332
333	! Check if right moment to receive from coupler
334	IF (MOD(itime, nexca) == 1) THEN
335	is_modified=.TRUE.
336
337	time_sec=(itime-1)*dtime
338	#ifdef CPP_COUPLE
339	!$OMP MASTER
340	CALL fromcpl(time_sec, tab_read_flds)
341	!$OMP END MASTER
342	#endif
343
344	! NetCDF output of received fields
345	IF (is_sequential) THEN
346	ndexcs(:) = 0
347	itau_w = itau_phy + itime + start_time * day_step / iphysiq
348	DO i = 1, maxrecv
349	IF (inforecv(i)%action) THEN
350	CALL histwrite(nidcs,inforecv(i)%name,itau_w,tab_read_flds(:,:,i),iim*(jjm+1),ndexcs)
351	ENDIF
352	END DO
353	ENDIF
354
355
356	! Save each field in a 2D array.
357	!$OMP MASTER
358	read_sst(:,:) = tab_read_flds(:,:,idr_sisutw) ! Sea surface temperature
359	read_sic(:,:) = tab_read_flds(:,:,idr_icecov) ! Sea ice concentration
360	read_alb_sic(:,:) = tab_read_flds(:,:,idr_icealw) ! Albedo at sea ice
361	read_sit(:,:) = tab_read_flds(:,:,idr_icetem) ! Sea ice temperature
362	!$OMP END MASTER
363
364	IF (cpl_current) THEN
365
366	! Transform the longitudes and latitudes on 2D arrays
367	CALL gather_omp(rlon,rlon_mpi)
368	CALL gather_omp(rlat,rlat_mpi)
369	!$OMP MASTER
370	CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon)
371	CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat)
372
373	! Transform the currents from cartesian to spheric coordinates
374	! tmp_r0 should be zero
375	CALL geo2atm(iim, jj_nb, tab_read_flds(:,:,idr_curenx), &
376	tab_read_flds(:,:,idr_cureny), tab_read_flds(:,:,idr_curenz), &
377	tmp_lon, tmp_lat, &
378	read_u0(:,:), read_v0(:,:), tmp_r0(:,:))
379	!$OMP END MASTER
380
381	ELSE
382	read_u0(:,:) = 0.
383	read_v0(:,:) = 0.
384	ENDIF
385
386	IF (carbon_cycle_cpl) THEN
387	!$OMP MASTER
388	read_co2(:,:) = tab_read_flds(:,:,idr_oceco2) ! CO2 flux
389	!$OMP END MASTER
390	ENDIF
391
392	!*************************************************************************************
393	! Transform seaice fraction (read_sic : ocean-seaice mask) into global
394	! fraction (pctsrf : ocean-seaice-land-landice mask)
395	!
396	!*************************************************************************************
397	CALL cpl2gath(read_sic, read_sic1D, klon, unity)
398
399	pctsrf_old(:,:) = pctsrf(:,:)
400	DO i = 1, klon
401	! treatment only of points with ocean and/or seaice
402	! old land-ocean mask can not be changed
403	IF (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic) > 0.) THEN
404	pctsrf(i,is_sic) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) &
405	* read_sic1D(i)
406	pctsrf(i,is_oce) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) &
407	- pctsrf(i,is_sic)
408	ENDIF
409	ENDDO
410
411	END IF ! if time to receive
412
413	END SUBROUTINE cpl_receive_frac
414
415	!
416	!*************************************************************************************
417	!
418
419	SUBROUTINE cpl_receive_ocean_fields(knon, knindex, tsurf_new, u0_new, v0_new)
420	!
421	! This routine returns the field for the ocean that has been read from the coupler
422	! (done earlier with cpl_receive_frac). The field is the temperature.
423	! The temperature is transformed into 1D array with valid points from index 1 to knon.
424	!
425	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day
426	USE indice_sol_mod
427
428	! Input arguments
429	!*************************************************************************************
430	INTEGER, INTENT(IN) :: knon
431	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
432
433	! Output arguments
434	!*************************************************************************************
435	REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new
436	REAL, DIMENSION(klon), INTENT(OUT) :: u0_new
437	REAL, DIMENSION(klon), INTENT(OUT) :: v0_new
438
439	! Local variables
440	!*************************************************************************************
441	INTEGER :: i
442	INTEGER, DIMENSION(klon) :: index
443	REAL, DIMENSION(klon) :: sic_new
444
445	!*************************************************************************************
446	! Transform read_sst into compressed 1D variable tsurf_new
447	!
448	!*************************************************************************************
449	CALL cpl2gath(read_sst, tsurf_new, knon, knindex)
450	CALL cpl2gath(read_sic, sic_new, knon, knindex)
451	CALL cpl2gath(read_u0, u0_new, knon, knindex)
452	CALL cpl2gath(read_v0, v0_new, knon, knindex)
453
454	!*************************************************************************************
455	! Transform read_co2 into uncompressed 1D variable fco2_ocn_day added directly in
456	! the module carbon_cycle_mod
457	!
458	!*************************************************************************************
459	IF (carbon_cycle_cpl) THEN
460	DO i=1,klon
461	index(i)=i
462	END DO
463	CALL cpl2gath(read_co2, fco2_ocn_day, klon, index)
464	END IF
465
466	!*************************************************************************************
467	! The fields received from the coupler have to be weighted with the fraction of ocean
468	! in relation to the total sea-ice+ocean
469	!
470	!*************************************************************************************
471	DO i=1, knon
472	tsurf_new(i) = tsurf_new(i)/(1. - sic_new(i))
473	END DO
474
475	END SUBROUTINE cpl_receive_ocean_fields
476
477	!
478	!*************************************************************************************
479	!
480
481	SUBROUTINE cpl_receive_seaice_fields(knon, knindex, &
482	tsurf_new, alb_new, u0_new, v0_new)
483	!
484	! This routine returns the fields for the seaice that have been read from the coupler
485	! (done earlier with cpl_receive_frac). These fields are the temperature and
486	! albedo at sea ice surface and fraction of sea ice.
487	! The fields are transformed into 1D arrays with valid points from index 1 to knon.
488	!
489
490	! Input arguments
491	!*************************************************************************************
492	INTEGER, INTENT(IN) :: knon
493	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
494
495	! Output arguments
496	!*************************************************************************************
497	REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new
498	REAL, DIMENSION(klon), INTENT(OUT) :: alb_new
499	REAL, DIMENSION(klon), INTENT(OUT) :: u0_new
500	REAL, DIMENSION(klon), INTENT(OUT) :: v0_new
501
502	! Local variables
503	!*************************************************************************************
504	INTEGER :: i
505	REAL, DIMENSION(klon) :: sic_new
506
507	!*************************************************************************************
508	! Transform fields read from coupler from 2D into compressed 1D variables
509	!
510	!*************************************************************************************
511	CALL cpl2gath(read_sit, tsurf_new, knon, knindex)
512	CALL cpl2gath(read_alb_sic, alb_new, knon, knindex)
513	CALL cpl2gath(read_sic, sic_new, knon, knindex)
514	CALL cpl2gath(read_u0, u0_new, knon, knindex)
515	CALL cpl2gath(read_v0, v0_new, knon, knindex)
516
517	!*************************************************************************************
518	! The fields received from the coupler have to be weighted with the sea-ice
519	! concentration (in relation to the total sea-ice + ocean).
520	!
521	!*************************************************************************************
522	DO i= 1, knon
523	tsurf_new(i) = tsurf_new(i) / sic_new(i)
524	alb_new(i) = alb_new(i) / sic_new(i)
525	END DO
526
527	END SUBROUTINE cpl_receive_seaice_fields
528
529	!
530	!*************************************************************************************
531	!
532
533	SUBROUTINE cpl_send_ocean_fields(itime, knon, knindex, &
534	swdown, lwdown, fluxlat, fluxsens, &
535	precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy, windsp)
536	!
537	! This subroutine cumulates some fields for each time-step during a coupling
538	! period. At last time-step in a coupling period the fields are transformed to the
539	! grid accepted by the coupler. No sending to the coupler will be done from here
540	! (it is done in cpl_send_seaice_fields).
541	!
542	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, co2_send
543	USE indice_sol_mod
544	INCLUDE "dimensions.h"
545
546	! Input arguments
547	!*************************************************************************************
548	INTEGER, INTENT(IN) :: itime
549	INTEGER, INTENT(IN) :: knon
550	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
551	REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown
552	REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens
553	REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow
554	REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder, albsol
555	REAL, DIMENSION(klon), INTENT(IN) :: taux, tauy, windsp
556
557	! Local variables
558	!*************************************************************************************
559	INTEGER :: cpl_index, ig
560	INTEGER :: error, sum_error
561	CHARACTER(len = 25) :: modname = 'cpl_send_ocean_fields'
562	CHARACTER(len = 80) :: abort_message
563
564	!*************************************************************************************
565	! Start calculation
566	! The ocean points are saved with second array index=1
567	!
568	!*************************************************************************************
569	cpl_index = 1
570
571	!*************************************************************************************
572	! Reset fields to zero in the beginning of a new coupling period
573	!
574	!*************************************************************************************
575	IF (MOD(itime, nexca) == 1) THEN
576	cpl_sols(1:knon,cpl_index) = 0.0
577	cpl_nsol(1:knon,cpl_index) = 0.0
578	cpl_rain(1:knon,cpl_index) = 0.0
579	cpl_snow(1:knon,cpl_index) = 0.0
580	cpl_evap(1:knon,cpl_index) = 0.0
581	cpl_tsol(1:knon,cpl_index) = 0.0
582	cpl_fder(1:knon,cpl_index) = 0.0
583	cpl_albe(1:knon,cpl_index) = 0.0
584	cpl_taux(1:knon,cpl_index) = 0.0
585	cpl_tauy(1:knon,cpl_index) = 0.0
586	cpl_windsp(1:knon,cpl_index) = 0.0
587	cpl_taumod(1:knon,cpl_index) = 0.0
588	IF (carbon_cycle_cpl) cpl_atm_co2(1:knon,cpl_index) = 0.0
589	ENDIF
590
591	!*************************************************************************************
592	! Cumulate at each time-step
593	!
594	!*************************************************************************************
595	DO ig = 1, knon
596	cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + &
597	swdown(ig) / REAL(nexca)
598	cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + &
599	(lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca)
600	cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + &
601	precip_rain(ig) / REAL(nexca)
602	cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + &
603	precip_snow(ig) / REAL(nexca)
604	cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + &
605	evap(ig) / REAL(nexca)
606	cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + &
607	tsurf(ig) / REAL(nexca)
608	cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + &
609	fder(ig) / REAL(nexca)
610	cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + &
611	albsol(ig) / REAL(nexca)
612	cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + &
613	taux(ig) / REAL(nexca)
614	cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + &
615	tauy(ig) / REAL(nexca)
616	cpl_windsp(ig,cpl_index) = cpl_windsp(ig,cpl_index) + &
617	windsp(ig) / REAL(nexca)
618	cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + &
619	SQRT ( taux(ig)taux(ig)+tauy(ig)tauy(ig) ) / REAL (nexca)
620
621	IF (carbon_cycle_cpl) THEN
622	cpl_atm_co2(ig,cpl_index) = cpl_atm_co2(ig,cpl_index) + &
623	co2_send(knindex(ig))/ REAL(nexca)
624	END IF
625	ENDDO
626
627	!*************************************************************************************
628	! If the time-step corresponds to the end of coupling period the
629	! fields are transformed to the 2D grid.
630	! No sending to the coupler (it is done from cpl_send_seaice_fields).
631	!
632	!*************************************************************************************
633	IF (MOD(itime, nexca) == 0) THEN
634
635	IF (.NOT. ALLOCATED(cpl_sols2D)) THEN
636	sum_error = 0
637	ALLOCATE(cpl_sols2D(iim,jj_nb,2), stat=error)
638	sum_error = sum_error + error
639	ALLOCATE(cpl_nsol2D(iim,jj_nb,2), stat=error)
640	sum_error = sum_error + error
641	ALLOCATE(cpl_rain2D(iim,jj_nb,2), stat=error)
642	sum_error = sum_error + error
643	ALLOCATE(cpl_snow2D(iim,jj_nb,2), stat=error)
644	sum_error = sum_error + error
645	ALLOCATE(cpl_evap2D(iim,jj_nb,2), stat=error)
646	sum_error = sum_error + error
647	ALLOCATE(cpl_tsol2D(iim,jj_nb,2), stat=error)
648	sum_error = sum_error + error
649	ALLOCATE(cpl_fder2D(iim,jj_nb,2), stat=error)
650	sum_error = sum_error + error
651	ALLOCATE(cpl_albe2D(iim,jj_nb,2), stat=error)
652	sum_error = sum_error + error
653	ALLOCATE(cpl_taux2D(iim,jj_nb,2), stat=error)
654	sum_error = sum_error + error
655	ALLOCATE(cpl_tauy2D(iim,jj_nb,2), stat=error)
656	sum_error = sum_error + error
657	ALLOCATE(cpl_windsp2D(iim,jj_nb), stat=error)
658	sum_error = sum_error + error
659	ALLOCATE(cpl_taumod2D(iim,jj_nb,2), stat=error)
660	sum_error = sum_error + error
661
662	IF (carbon_cycle_cpl) THEN
663	ALLOCATE(cpl_atm_co22D(iim,jj_nb), stat=error)
664	sum_error = sum_error + error
665	END IF
666
667	IF (sum_error /= 0) THEN
668	abort_message='Pb allocation variables couplees pour l''ecriture'
669	CALL abort_gcm(modname,abort_message,1)
670	ENDIF
671	ENDIF
672
673
674	CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), &
675	knon, knindex)
676
677	CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), &
678	knon, knindex)
679
680	CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), &
681	knon, knindex)
682
683	CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), &
684	knon, knindex)
685
686	CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), &
687	knon, knindex)
688
689	! cpl_tsol2D(:,:,:) not used!
690	CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), &
691	knon, knindex)
692
693	! cpl_fder2D(:,:,1) not used, only cpl_fder(:,:,2)!
694	CALL gath2cpl(cpl_fder(:,cpl_index), cpl_fder2D(:,:,cpl_index), &
695	knon, knindex)
696
697	! cpl_albe2D(:,:,:) not used!
698	CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), &
699	knon, knindex)
700
701	CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), &
702	knon, knindex)
703
704	CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), &
705	knon, knindex)
706
707	CALL gath2cpl(cpl_windsp(:,cpl_index), cpl_windsp2D(:,:), &
708	knon, knindex)
709
710	CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), &
711	knon, knindex)
712
713	IF (carbon_cycle_cpl) &
714	CALL gath2cpl(cpl_atm_co2(:,cpl_index), cpl_atm_co22D(:,:), knon, knindex)
715	ENDIF
716
717	END SUBROUTINE cpl_send_ocean_fields
718
719	!
720	!*************************************************************************************
721	!
722
723	SUBROUTINE cpl_send_seaice_fields(itime, dtime, knon, knindex, &
724	pctsrf, lafin, rlon, rlat, &
725	swdown, lwdown, fluxlat, fluxsens, &
726	precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy)
727	!
728	! This subroutine cumulates some fields for each time-step during a coupling
729	! period. At last time-step in a coupling period the fields are transformed to the
730	! grid accepted by the coupler. All fields for all types of surfaces are sent to
731	! the coupler.
732	!
733	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
734	USE indice_sol_mod
735	INCLUDE "dimensions.h"
736
737	! Input arguments
738	!*************************************************************************************
739	INTEGER, INTENT(IN) :: itime
740	INTEGER, INTENT(IN) :: knon
741	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
742	REAL, INTENT(IN) :: dtime
743	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
744	REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown
745	REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens
746	REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow
747	REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder
748	REAL, DIMENSION(klon), INTENT(IN) :: albsol, taux, tauy
749	REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf
750	LOGICAL, INTENT(IN) :: lafin
751
752	! Local variables
753	!*************************************************************************************
754	INTEGER :: cpl_index, ig
755	INTEGER :: error, sum_error
756	CHARACTER(len = 25) :: modname = 'cpl_send_seaice_fields'
757	CHARACTER(len = 80) :: abort_message
758	REAL, DIMENSION(klon) :: cpl_fder_tmp
759
760	!*************************************************************************************
761	! Start calulation
762	! The sea-ice points are saved with second array index=2
763	!
764	!*************************************************************************************
765	cpl_index = 2
766
767	!*************************************************************************************
768	! Reset fields to zero in the beginning of a new coupling period
769	!
770	!*************************************************************************************
771	IF (MOD(itime, nexca) == 1) THEN
772	cpl_sols(1:knon,cpl_index) = 0.0
773	cpl_nsol(1:knon,cpl_index) = 0.0
774	cpl_rain(1:knon,cpl_index) = 0.0
775	cpl_snow(1:knon,cpl_index) = 0.0
776	cpl_evap(1:knon,cpl_index) = 0.0
777	cpl_tsol(1:knon,cpl_index) = 0.0
778	cpl_fder(1:knon,cpl_index) = 0.0
779	cpl_albe(1:knon,cpl_index) = 0.0
780	cpl_taux(1:knon,cpl_index) = 0.0
781	cpl_tauy(1:knon,cpl_index) = 0.0
782	cpl_taumod(1:knon,cpl_index) = 0.0
783	ENDIF
784
785	!*************************************************************************************
786	! Cumulate at each time-step
787	!
788	!*************************************************************************************
789	DO ig = 1, knon
790	cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + &
791	swdown(ig) / REAL(nexca)
792	cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + &
793	(lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca)
794	cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + &
795	precip_rain(ig) / REAL(nexca)
796	cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + &
797	precip_snow(ig) / REAL(nexca)
798	cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + &
799	evap(ig) / REAL(nexca)
800	cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + &
801	tsurf(ig) / REAL(nexca)
802	cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + &
803	fder(ig) / REAL(nexca)
804	cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + &
805	albsol(ig) / REAL(nexca)
806	cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + &
807	taux(ig) / REAL(nexca)
808	cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + &
809	tauy(ig) / REAL(nexca)
810	cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + &
811	SQRT ( taux(ig)taux(ig)+tauy(ig)tauy(ig) ) / REAL(nexca)
812	ENDDO
813
814	!*************************************************************************************
815	! If the time-step corresponds to the end of coupling period the
816	! fields are transformed to the 2D grid and all fields are sent to coupler.
817	!
818	!*************************************************************************************
819	IF (MOD(itime, nexca) == 0) THEN
820	IF (.NOT. ALLOCATED(cpl_sols2D)) THEN
821	sum_error = 0
822	ALLOCATE(cpl_sols2D(iim,jj_nb,2), stat=error)
823	sum_error = sum_error + error
824	ALLOCATE(cpl_nsol2D(iim,jj_nb,2), stat=error)
825	sum_error = sum_error + error
826	ALLOCATE(cpl_rain2D(iim,jj_nb,2), stat=error)
827	sum_error = sum_error + error
828	ALLOCATE(cpl_snow2D(iim,jj_nb,2), stat=error)
829	sum_error = sum_error + error
830	ALLOCATE(cpl_evap2D(iim,jj_nb,2), stat=error)
831	sum_error = sum_error + error
832	ALLOCATE(cpl_tsol2D(iim,jj_nb,2), stat=error)
833	sum_error = sum_error + error
834	ALLOCATE(cpl_fder2D(iim,jj_nb,2), stat=error)
835	sum_error = sum_error + error
836	ALLOCATE(cpl_albe2D(iim,jj_nb,2), stat=error)
837	sum_error = sum_error + error
838	ALLOCATE(cpl_taux2D(iim,jj_nb,2), stat=error)
839	sum_error = sum_error + error
840	ALLOCATE(cpl_tauy2D(iim,jj_nb,2), stat=error)
841	sum_error = sum_error + error
842	ALLOCATE(cpl_windsp2D(iim,jj_nb), stat=error)
843	sum_error = sum_error + error
844	ALLOCATE(cpl_taumod2D(iim,jj_nb,2), stat=error)
845	sum_error = sum_error + error
846
847	IF (carbon_cycle_cpl) THEN
848	ALLOCATE(cpl_atm_co22D(iim,jj_nb), stat=error)
849	sum_error = sum_error + error
850	END IF
851
852	IF (sum_error /= 0) THEN
853	abort_message='Pb allocation variables couplees pour l''ecriture'
854	CALL abort_gcm(modname,abort_message,1)
855	ENDIF
856	ENDIF
857
858	CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), &
859	knon, knindex)
860
861	CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), &
862	knon, knindex)
863
864	CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), &
865	knon, knindex)
866
867	CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), &
868	knon, knindex)
869
870	CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), &
871	knon, knindex)
872
873	! cpl_tsol2D(:,:,:) not used!
874	CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), &
875	knon, knindex)
876
877	! Set default value and decompress before gath2cpl
878	cpl_fder_tmp(:) = -20.
879	DO ig = 1, knon
880	cpl_fder_tmp(knindex(ig))=cpl_fder(ig,cpl_index)
881	END DO
882	CALL gath2cpl(cpl_fder_tmp(:), cpl_fder2D(:,:,cpl_index), &
883	klon, unity)
884
885	! cpl_albe2D(:,:,:) not used!
886	CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), &
887	knon, knindex)
888
889	CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), &
890	knon, knindex)
891
892	CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), &
893	knon, knindex)
894
895	CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), &
896	knon, knindex)
897
898	! Send all fields
899	CALL cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat)
900	ENDIF
901
902	END SUBROUTINE cpl_send_seaice_fields
903
904	!
905	!*************************************************************************************
906	!
907
908	SUBROUTINE cpl_send_land_fields(itime, knon, knindex, rriv_in, rcoa_in)
909	!
910	! This subroutine cumulates some fields for each time-step during a coupling
911	! period. At last time-step in a coupling period the fields are transformed to the
912	! grid accepted by the coupler. No sending to the coupler will be done from here
913	! (it is done in cpl_send_seaice_fields).
914	!
915	INCLUDE "dimensions.h"
916
917	! Input arguments
918	!*************************************************************************************
919	INTEGER, INTENT(IN) :: itime
920	INTEGER, INTENT(IN) :: knon
921	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
922	REAL, DIMENSION(klon), INTENT(IN) :: rriv_in
923	REAL, DIMENSION(klon), INTENT(IN) :: rcoa_in
924
925	! Local variables
926	!*************************************************************************************
927	REAL, DIMENSION(iim,jj_nb) :: rriv2D
928	REAL, DIMENSION(iim,jj_nb) :: rcoa2D
929
930	!*************************************************************************************
931	! Rearrange fields in 2D variables
932	! First initialize to zero to avoid unvalid points causing problems
933	!
934	!*************************************************************************************
935	!$OMP MASTER
936	rriv2D(:,:) = 0.0
937	rcoa2D(:,:) = 0.0
938	!$OMP END MASTER
939	CALL gath2cpl(rriv_in, rriv2D, knon, knindex)
940	CALL gath2cpl(rcoa_in, rcoa2D, knon, knindex)
941
942	!*************************************************************************************
943	! Reset cumulated fields to zero in the beginning of a new coupling period
944	!
945	!*************************************************************************************
946	IF (MOD(itime, nexca) == 1) THEN
947	!$OMP MASTER
948	cpl_rriv2D(:,:) = 0.0
949	cpl_rcoa2D(:,:) = 0.0
950	!$OMP END MASTER
951	ENDIF
952
953	!*************************************************************************************
954	! Cumulate : Following fields should be cumulated at each time-step
955	!
956	!*************************************************************************************
957	!$OMP MASTER
958	cpl_rriv2D(:,:) = cpl_rriv2D(:,:) + rriv2D(:,:) / REAL(nexca)
959	cpl_rcoa2D(:,:) = cpl_rcoa2D(:,:) + rcoa2D(:,:) / REAL(nexca)
960	!$OMP END MASTER
961
962	END SUBROUTINE cpl_send_land_fields
963
964	!
965	!*************************************************************************************
966	!
967
968	SUBROUTINE cpl_send_landice_fields(itime, knon, knindex, rlic_in)
969	! This subroutine cumulates the field for melting ice for each time-step
970	! during a coupling period. This routine will not send to coupler. Sending
971	! will be done in cpl_send_seaice_fields.
972	!
973
974	INCLUDE "dimensions.h"
975
976	! Input varibales
977	!*************************************************************************************
978	INTEGER, INTENT(IN) :: itime
979	INTEGER, INTENT(IN) :: knon
980	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
981	REAL, DIMENSION(klon), INTENT(IN) :: rlic_in
982
983	! Local varibales
984	!*************************************************************************************
985	REAL, DIMENSION(iim,jj_nb) :: rlic2D
986
987	!*************************************************************************************
988	! Rearrange field in a 2D variable
989	! First initialize to zero to avoid unvalid points causing problems
990	!
991	!*************************************************************************************
992	!$OMP MASTER
993	rlic2D(:,:) = 0.0
994	!$OMP END MASTER
995	CALL gath2cpl(rlic_in, rlic2D, knon, knindex)
996
997	!*************************************************************************************
998	! Reset field to zero in the beginning of a new coupling period
999	!
1000	!*************************************************************************************
1001	IF (MOD(itime, nexca) == 1) THEN
1002	!$OMP MASTER
1003	cpl_rlic2D(:,:) = 0.0
1004	!$OMP END MASTER
1005	ENDIF
1006
1007	!*************************************************************************************
1008	! Cumulate : Melting ice should be cumulated at each time-step
1009	!
1010	!*************************************************************************************
1011	!$OMP MASTER
1012	cpl_rlic2D(:,:) = cpl_rlic2D(:,:) + rlic2D(:,:) / REAL(nexca)
1013	!$OMP END MASTER
1014
1015	END SUBROUTINE cpl_send_landice_fields
1016
1017	!
1018	!*************************************************************************************
1019	!
1020
1021	SUBROUTINE cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat)
1022	! This routine will send fields for all different surfaces to the coupler.
1023	! This subroutine should be executed after calculations by the last surface(sea-ice),
1024	! all calculations at the different surfaces have to be done before.
1025	!
1026	USE surface_data
1027	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
1028	USE indice_sol_mod
1029	! Some includes
1030	!*************************************************************************************
1031	INCLUDE "temps.h"
1032	INCLUDE "dimensions.h"
1033
1034	! Input arguments
1035	!*************************************************************************************
1036	INTEGER, INTENT(IN) :: itime
1037	REAL, INTENT(IN) :: dtime
1038	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
1039	REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf
1040	LOGICAL, INTENT(IN) :: lafin
1041
1042	! Local variables
1043	!*************************************************************************************
1044	INTEGER :: error, sum_error, j
1045	INTEGER :: itau_w
1046	INTEGER :: time_sec
1047	INTEGER, DIMENSION(iim*(jjm+1)) :: ndexct
1048	REAL :: Up, Down
1049	REAL, DIMENSION(iim, jj_nb) :: tmp_lon, tmp_lat
1050	REAL, DIMENSION(iim, jj_nb, 4) :: pctsrf2D
1051	REAL, DIMENSION(iim, jj_nb) :: deno
1052	CHARACTER(len = 20) :: modname = 'cpl_send_all'
1053	CHARACTER(len = 80) :: abort_message
1054
1055	! Variables with fields to coupler
1056	REAL, DIMENSION(iim, jj_nb) :: tmp_taux
1057	REAL, DIMENSION(iim, jj_nb) :: tmp_tauy
1058	REAL, DIMENSION(iim, jj_nb) :: tmp_calv
1059	! Table with all fields to send to coupler
1060	REAL, DIMENSION(iim, jj_nb, maxsend) :: tab_flds
1061	REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi
1062
1063	#ifdef CPP_MPI
1064	INCLUDE 'mpif.h'
1065	INTEGER, DIMENSION(MPI_STATUS_SIZE) :: status
1066	#endif
1067
1068	! End definitions
1069	!*************************************************************************************
1070
1071
1072
1073	!*************************************************************************************
1074	! All fields are stored in a table tab_flds(:,:,:)
1075	! First store the fields which are already on the right format
1076	!
1077	!*************************************************************************************
1078	!$OMP MASTER
1079	tab_flds(:,:,ids_windsp) = cpl_windsp2D(:,:)
1080	tab_flds(:,:,ids_shfice) = cpl_sols2D(:,:,2)
1081	tab_flds(:,:,ids_nsfice) = cpl_nsol2D(:,:,2)
1082	tab_flds(:,:,ids_dflxdt) = cpl_fder2D(:,:,2)
1083
1084	IF (version_ocean=='nemo') THEN
1085	tab_flds(:,:,ids_liqrun) = cpl_rriv2D(:,:) + cpl_rcoa2D(:,:)
1086	IF (carbon_cycle_cpl) tab_flds(:,:,ids_atmco2)=cpl_atm_co22D(:,:)
1087	ELSE IF (version_ocean=='opa8') THEN
1088	tab_flds(:,:,ids_shfoce) = cpl_sols2D(:,:,1)
1089	tab_flds(:,:,ids_nsfoce) = cpl_nsol2D(:,:,1)
1090	tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2)
1091	tab_flds(:,:,ids_ocevap) = cpl_evap2D(:,:,1)
1092	tab_flds(:,:,ids_runcoa) = cpl_rcoa2D(:,:)
1093	tab_flds(:,:,ids_rivflu) = cpl_rriv2D(:,:)
1094	END IF
1095
1096	!*************************************************************************************
1097	! Transform the fraction of sub-surfaces from 1D to 2D array
1098	!
1099	!*************************************************************************************
1100	pctsrf2D(:,:,:) = 0.
1101	!$OMP END MASTER
1102	CALL gath2cpl(pctsrf(:,is_oce), pctsrf2D(:,:,is_oce), klon, unity)
1103	CALL gath2cpl(pctsrf(:,is_sic), pctsrf2D(:,:,is_sic), klon, unity)
1104	CALL gath2cpl(pctsrf(:,is_lic), pctsrf2D(:,:,is_lic), klon, unity)
1105
1106	!*************************************************************************************
1107	! Calculate the average calving per latitude
1108	! Store calving in tab_flds(:,:,19)
1109	!
1110	!*************************************************************************************
1111	IF (is_omp_root) THEN
1112
1113	DO j = 1, jj_nb
1114	tmp_calv(:,j) = DOT_PRODUCT (cpl_rlic2D(1:iim,j), &
1115	pctsrf2D(1:iim,j,is_lic)) / REAL(iim)
1116	ENDDO
1117
1118
1119	IF (is_parallel) THEN
1120	IF (.NOT. is_north_pole) THEN
1121	#ifdef CPP_MPI
1122	CALL MPI_RECV(Up,1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,status,error)
1123	CALL MPI_SEND(tmp_calv(1,1),1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,error)
1124	#endif
1125	ENDIF
1126
1127	IF (.NOT. is_south_pole) THEN
1128	#ifdef CPP_MPI
1129	CALL MPI_SEND(tmp_calv(1,jj_nb),1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,error)
1130	CALL MPI_RECV(down,1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,status,error)
1131	#endif
1132	ENDIF
1133
1134	IF (.NOT. is_north_pole .AND. ii_begin /=1) THEN
1135	Up=Up+tmp_calv(iim,1)
1136	tmp_calv(:,1)=Up
1137	ENDIF
1138
1139	IF (.NOT. is_south_pole .AND. ii_end /= iim) THEN
1140	Down=Down+tmp_calv(1,jj_nb)
1141	tmp_calv(:,jj_nb)=Down
1142	ENDIF
1143	ENDIF
1144
1145	tab_flds(:,:,ids_calvin) = tmp_calv(:,:)
1146
1147	!*************************************************************************************
1148	! Calculate total flux for snow, rain and wind with weighted addition using the
1149	! fractions of ocean and seaice.
1150	!
1151	!*************************************************************************************
1152	! fraction oce+seaice
1153	deno = pctsrf2D(:,:,is_oce) + pctsrf2D(:,:,is_sic)
1154
1155	IF (version_ocean=='nemo') THEN
1156	tab_flds(:,:,ids_shftot) = 0.0
1157	tab_flds(:,:,ids_nsftot) = 0.0
1158	tab_flds(:,:,ids_totrai) = 0.0
1159	tab_flds(:,:,ids_totsno) = 0.0
1160	tab_flds(:,:,ids_toteva) = 0.0
1161	tab_flds(:,:,ids_taumod) = 0.0
1162
1163	tmp_taux(:,:) = 0.0
1164	tmp_tauy(:,:) = 0.0
1165	! For all valid grid cells containing some fraction of ocean or sea-ice
1166	WHERE ( deno(:,:) /= 0 )
1167	tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1168	cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1169	tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1170	cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1171
1172	tab_flds(:,:,ids_shftot) = cpl_sols2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1173	cpl_sols2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1174	tab_flds(:,:,ids_nsftot) = cpl_nsol2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1175	cpl_nsol2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1176	tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1177	cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1178	tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1179	cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1180	tab_flds(:,:,ids_toteva) = cpl_evap2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1181	cpl_evap2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1182	tab_flds(:,:,ids_taumod) = cpl_taumod2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1183	cpl_taumod2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1184
1185	ENDWHERE
1186
1187	tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2)
1188
1189	ELSE IF (version_ocean=='opa8') THEN
1190	! Store fields for rain and snow in tab_flds(:,:,15) and tab_flds(:,:,16)
1191	tab_flds(:,:,ids_totrai) = 0.0
1192	tab_flds(:,:,ids_totsno) = 0.0
1193	tmp_taux(:,:) = 0.0
1194	tmp_tauy(:,:) = 0.0
1195	! For all valid grid cells containing some fraction of ocean or sea-ice
1196	WHERE ( deno(:,:) /= 0 )
1197	tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1198	cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1199	tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1200	cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1201
1202	tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1203	cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1204	tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1205	cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1206	ENDWHERE
1207	END IF
1208
1209	ENDIF ! is_omp_root
1210
1211	!*************************************************************************************
1212	! Transform the wind components from local atmospheric 2D coordinates to geocentric
1213	! 3D coordinates.
1214	! Store the resulting wind components in tab_flds(:,:,1:6)
1215	!*************************************************************************************
1216
1217	! Transform the longitudes and latitudes on 2D arrays
1218
1219	CALL gather_omp(rlon,rlon_mpi)
1220	CALL gather_omp(rlat,rlat_mpi)
1221	!$OMP MASTER
1222	CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon)
1223	CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat)
1224	!$OMP END MASTER
1225
1226	IF (is_sequential) THEN
1227	IF (is_north_pole) tmp_lon(:,1) = tmp_lon(:,2)
1228	IF (is_south_pole) tmp_lon(:,jjm+1) = tmp_lon(:,jjm)
1229	ENDIF
1230
1231	! NetCDF output of the wind before transformation of coordinate system
1232	IF (is_sequential) THEN
1233	ndexct(:) = 0
1234	itau_w = itau_phy + itime + start_time * day_step / iphysiq
1235	CALL histwrite(nidct,'tauxe',itau_w,tmp_taux,iim*(jjm+1),ndexct)
1236	CALL histwrite(nidct,'tauyn',itau_w,tmp_tauy,iim*(jjm+1),ndexct)
1237	CALL histwrite(nidct,'tmp_lon',itau_w,tmp_lon,iim*(jjm+1),ndexct)
1238	CALL histwrite(nidct,'tmp_lat',itau_w,tmp_lat,iim*(jjm+1),ndexct)
1239	ENDIF
1240
1241	! Transform the wind from spherical atmospheric 2D coordinates to geocentric
1242	! cartesian 3D coordinates
1243	!$OMP MASTER
1244	CALL atm2geo (iim, jj_nb, tmp_taux, tmp_tauy, tmp_lon, tmp_lat, &
1245	tab_flds(:,:,ids_tauxxu), tab_flds(:,:,ids_tauyyu), tab_flds(:,:,ids_tauzzu) )
1246
1247	tab_flds(:,:,ids_tauxxv) = tab_flds(:,:,ids_tauxxu)
1248	tab_flds(:,:,ids_tauyyv) = tab_flds(:,:,ids_tauyyu)
1249	tab_flds(:,:,ids_tauzzv) = tab_flds(:,:,ids_tauzzu)
1250	!$OMP END MASTER
1251
1252	!*************************************************************************************
1253	! NetCDF output of all fields just before sending to coupler.
1254	!
1255	!*************************************************************************************
1256	IF (is_sequential) THEN
1257	DO j=1,maxsend
1258	IF (infosend(j)%action) CALL histwrite(nidct,infosend(j)%name, itau_w, &
1259	tab_flds(:,:,j),iim*(jjm+1),ndexct)
1260	ENDDO
1261	ENDIF
1262	!*************************************************************************************
1263	! Send the table of all fields
1264	!
1265	!*************************************************************************************
1266	time_sec=(itime-1)*dtime
1267	#ifdef CPP_COUPLE
1268	!$OMP MASTER
1269	CALL intocpl(time_sec, lafin, tab_flds(:,:,:))
1270	!$OMP END MASTER
1271	#endif
1272
1273	!*************************************************************************************
1274	! Finish with some dellocate
1275	!
1276	!*************************************************************************************
1277	sum_error=0
1278	DEALLOCATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D, cpl_snow2D, stat=error )
1279	sum_error = sum_error + error
1280	DEALLOCATE(cpl_evap2D, cpl_tsol2D, cpl_fder2D, cpl_albe2D, stat=error )
1281	sum_error = sum_error + error
1282	DEALLOCATE(cpl_taux2D, cpl_tauy2D, cpl_windsp2D, cpl_taumod2D, stat=error )
1283	sum_error = sum_error + error
1284
1285	IF (carbon_cycle_cpl) THEN
1286	DEALLOCATE(cpl_atm_co22D, stat=error )
1287	sum_error = sum_error + error
1288	END IF
1289
1290	IF (sum_error /= 0) THEN
1291	abort_message='Pb in deallocation of cpl_xxxx2D coupling variables'
1292	CALL abort_gcm(modname,abort_message,1)
1293	ENDIF
1294
1295	END SUBROUTINE cpl_send_all
1296	!
1297	!*************************************************************************************
1298	!
1299	SUBROUTINE cpl2gath(champ_in, champ_out, knon, knindex)
1300	USE mod_phys_lmdz_para
1301	! Cette routine transforme un champs de la grille 2D recu du coupleur sur la grille
1302	! 'gathered' (la grille physiq comprime).
1303	!
1304	!
1305	! input:
1306	! champ_in champ sur la grille 2D
1307	! knon nombre de points dans le domaine a traiter
1308	! knindex index des points de la surface a traiter
1309	!
1310	! output:
1311	! champ_out champ sur la grille 'gatherd'
1312	!
1313	INCLUDE "dimensions.h"
1314
1315	! Input
1316	INTEGER, INTENT(IN) :: knon
1317	REAL, DIMENSION(iim,jj_nb), INTENT(IN) :: champ_in
1318	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
1319
1320	! Output
1321	REAL, DIMENSION(klon_mpi), INTENT(OUT) :: champ_out
1322
1323	! Local
1324	INTEGER :: i, ig
1325	REAL, DIMENSION(klon_mpi) :: temp_mpi
1326	REAL, DIMENSION(klon) :: temp_omp
1327
1328	!*************************************************************************************
1329	!
1330
1331
1332	! Transform from 2 dimensions (iim,jj_nb) to 1 dimension (klon)
1333	!$OMP MASTER
1334	CALL Grid2Dto1D_mpi(champ_in,temp_mpi)
1335	!$OMP END MASTER
1336
1337	CALL scatter_omp(temp_mpi,temp_omp)
1338
1339	! Compress from klon to knon
1340	DO i = 1, knon
1341	ig = knindex(i)
1342	champ_out(i) = temp_omp(ig)
1343	ENDDO
1344
1345	END SUBROUTINE cpl2gath
1346	!
1347	!*************************************************************************************
1348	!
1349	SUBROUTINE gath2cpl(champ_in, champ_out, knon, knindex)
1350	USE mod_phys_lmdz_para
1351	! Cette routine ecrit un champ 'gathered' sur la grille 2D pour le passer
1352	! au coupleur.
1353	!
1354	! input:
1355	! champ_in champ sur la grille gathere
1356	! knon nombre de points dans le domaine a traiter
1357	! knindex index des points de la surface a traiter
1358	!
1359	! output:
1360	! champ_out champ sur la grille 2D
1361	!
1362	INCLUDE "dimensions.h"
1363
1364	! Input arguments
1365	!*************************************************************************************
1366	INTEGER, INTENT(IN) :: knon
1367	REAL, DIMENSION(klon), INTENT(IN) :: champ_in
1368	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
1369
1370	! Output arguments
1371	!*************************************************************************************
1372	REAL, DIMENSION(iim,jj_nb), INTENT(OUT) :: champ_out
1373
1374	! Local variables
1375	!*************************************************************************************
1376	INTEGER :: i, ig
1377	REAL, DIMENSION(klon) :: temp_omp
1378	REAL, DIMENSION(klon_mpi) :: temp_mpi
1379	!*************************************************************************************
1380
1381	! Decompress from knon to klon
1382	temp_omp = 0.
1383	DO i = 1, knon
1384	ig = knindex(i)
1385	temp_omp(ig) = champ_in(i)
1386	ENDDO
1387
1388	! Transform from 1 dimension (klon) to 2 dimensions (iim,jj_nb)
1389	CALL gather_omp(temp_omp,temp_mpi)
1390
1391	!$OMP MASTER
1392	CALL Grid1Dto2D_mpi(temp_mpi,champ_out)
1393
1394	IF (is_north_pole) champ_out(:,1)=temp_mpi(1)
1395	IF (is_south_pole) champ_out(:,jj_nb)=temp_mpi(klon)
1396	!$OMP END MASTER
1397
1398	END SUBROUTINE gath2cpl
1399	!
1400	!*************************************************************************************
1401	!
1402	END MODULE cpl_mod
1403

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format