Context Navigation

infotrac.F90 @ 2853

Last change on this file since 2853 was 1569, checked in by jghattas, 13 years ago
Added coherence test between variable type_trac and cpp key used when compiling.
File size: 13.8 KB

Line
1	! $Id$
2	!
3	MODULE infotrac
4
5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
6	INTEGER, SAVE :: nqtot
7
8	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
9	! number of tracers used in the physics
10	INTEGER, SAVE :: nbtr
11
12	! Name variables
13	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
14	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
15
16	! iadv : index of trasport schema for each tracer
17	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
18
19	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
20	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
21	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
22
23	! conv_flg(it)=0 : convection desactivated for tracer number it
24	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
25	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
26	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
27
28	CHARACTER(len=4),SAVE :: type_trac
29
30	CONTAINS
31
32	SUBROUTINE infotrac_init
33	USE control_mod
34	#ifdef REPROBUS
35	USE CHEM_REP, ONLY : Init_chem_rep_trac
36	#endif
37	IMPLICIT NONE
38	!=======================================================================
39	!
40	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
41	! -------
42	! Modif special traceur F.Forget 05/94
43	! Modif M-A Filiberti 02/02 lecture de traceur.def
44	!
45	! Objet:
46	! ------
47	! GCM LMD nouvelle grille
48	!
49	!=======================================================================
50	! ... modification de l'integration de q ( 26/04/94 ) ....
51	!-----------------------------------------------------------------------
52	! Declarations
53
54	INCLUDE "dimensions.h"
55	INCLUDE "iniprint.h"
56
57	! Local variables
58	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
59	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
60
61	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
62	CHARACTER(len=8), ALLOCATABLE, DIMENSION(:) :: tracnam ! name from INCA
63	CHARACTER(len=3), DIMENSION(30) :: descrq
64	CHARACTER(len=1), DIMENSION(3) :: txts
65	CHARACTER(len=2), DIMENSION(9) :: txtp
66	CHARACTER(len=23) :: str1,str2
67
68	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
69	INTEGER :: iq, new_iq, iiq, jq, ierr
70
71	character(len=*),parameter :: modname="infotrac_init"
72	!-----------------------------------------------------------------------
73	! Initialization :
74	!
75	txts=(/'x','y','z'/)
76	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
77
78	descrq(14)='VLH'
79	descrq(10)='VL1'
80	descrq(11)='VLP'
81	descrq(12)='FH1'
82	descrq(13)='FH2'
83	descrq(16)='PPM'
84	descrq(17)='PPS'
85	descrq(18)='PPP'
86	descrq(20)='SLP'
87	descrq(30)='PRA'
88
89
90	! Coherence test between parameter type_trac, config_inca and preprocessing keys
91	IF (type_trac=='inca') THEN
92	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
93	type_trac,' config_inca=',config_inca
94	IF (config_inca/='aero' .AND. config_inca/='chem') THEN
95	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
96	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
97	END IF
98	#ifndef INCA
99	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
100	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
101	#endif
102	ELSE IF (type_trac=='repr') THEN
103	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
104	#ifndef REPROBUS
105	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
106	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
107	#endif
108	ELSE IF (type_trac == 'lmdz') THEN
109	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
110	ELSE
111	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
112	CALL abort_gcm('infotrac_init','bad parameter',1)
113	END IF
114
115
116	! Test if config_inca is other then none for run without INCA
117	IF (type_trac/='inca' .AND. config_inca/='none') THEN
118	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
119	config_inca='none'
120	END IF
121
122
123	!-----------------------------------------------------------------------
124	!
125	! 1) Get the true number of tracers + water vapor/liquid
126	! Here true tracers (nqtrue) means declared tracers (only first order)
127	!
128	!-----------------------------------------------------------------------
129	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
130	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
131	IF(ierr.EQ.0) THEN
132	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
133	READ(90,*) nqtrue
134	ELSE
135	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
136	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
137	if (planet_type=='earth') then
138	nqtrue=4 ! Default value for Earth
139	else
140	nqtrue=1 ! Default value for other planets
141	endif
142	END IF
143	if ( planet_type=='earth') then
144	! For Earth, water vapour & liquid tracers are not in the physics
145	nbtr=nqtrue-2
146	else
147	! Other planets (for now); we have the same number of tracers
148	! in the dynamics than in the physics
149	nbtr=nqtrue
150	endif
151	ELSE ! type_trac=inca
152	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
153	nqtrue=nbtr+2
154	END IF
155
156	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
157	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
158	CALL abort_gcm('infotrac_init','Not enough tracers',1)
159	END IF
160
161	! Transfert number of tracers to Reprobus
162	IF (type_trac == 'repr') THEN
163	#ifdef REPROBUS
164	CALL Init_chem_rep_trac(nbtr)
165	#endif
166	END IF
167
168	!
169	! Allocate variables depending on nqtrue and nbtr
170	!
171	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue))
172	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), tracnam(nbtr))
173	conv_flg(:) = 1 ! convection activated for all tracers
174	pbl_flg(:) = 1 ! boundary layer activated for all tracers
175
176	!-----------------------------------------------------------------------
177	! 2) Choix des schemas d'advection pour l'eau et les traceurs
178	!
179	! iadv = 1 schema transport type "humidite specifique LMD"
180	! iadv = 2 schema amont
181	! iadv = 14 schema Van-leer + humidite specifique
182	! Modif F.Codron
183	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
184	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
185	! iadv = 12 schema Frederic Hourdin I
186	! iadv = 13 schema Frederic Hourdin II
187	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
188	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
189	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
190	! iadv = 20 schema Slopes
191	! iadv = 30 schema Prather
192	!
193	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
194	! iq = 2 pour l'eau liquide
195	! Et eventuellement iq = 3,nqtot pour les autres traceurs
196	!
197	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
198	!------------------------------------------------------------------------
199	!
200	! Get choice of advection schema from file tracer.def or from INCA
201	!---------------------------------------------------------------------
202	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
203	IF(ierr.EQ.0) THEN
204	! Continue to read tracer.def
205	DO iq=1,nqtrue
206	READ(90,*) hadv(iq),vadv(iq),tnom_0(iq)
207	END DO
208	CLOSE(90)
209	ELSE ! Without tracer.def, set default values
210	if (planet_type=="earth") then
211	! for Earth, default is to have 4 tracers
212	hadv(1) = 14
213	vadv(1) = 14
214	tnom_0(1) = 'H2Ov'
215	hadv(2) = 10
216	vadv(2) = 10
217	tnom_0(2) = 'H2Ol'
218	hadv(3) = 10
219	vadv(3) = 10
220	tnom_0(3) = 'RN'
221	hadv(4) = 10
222	vadv(4) = 10
223	tnom_0(4) = 'PB'
224	else ! default for other planets
225	hadv(1) = 10
226	vadv(1) = 10
227	tnom_0(1) = 'dummy'
228	endif ! of if (planet_type=="earth")
229	END IF
230
231	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
232	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
233	DO iq=1,nqtrue
234	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq)
235	END DO
236
237	ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
238	! le module de chimie fournit les noms des traceurs
239	! et les schemas d'advection associes.
240
241	#ifdef INCA
242	CALL init_transport( &
243	hadv, &
244	vadv, &
245	conv_flg, &
246	pbl_flg, &
247	tracnam)
248	#endif
249	tnom_0(1)='H2Ov'
250	tnom_0(2)='H2Ol'
251
252	DO iq =3,nqtrue
253	tnom_0(iq)=tracnam(iq-2)
254	END DO
255
256	END IF ! type_trac
257
258	!-----------------------------------------------------------------------
259	!
260	! 3) Verify if advection schema 20 or 30 choosen
261	! Calculate total number of tracers needed: nqtot
262	! Allocate variables depending on total number of tracers
263	!-----------------------------------------------------------------------
264	new_iq=0
265	DO iq=1,nqtrue
266	! Add tracers for certain advection schema
267	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
268	new_iq=new_iq+1 ! no tracers added
269	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
270	new_iq=new_iq+4 ! 3 tracers added
271	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
272	new_iq=new_iq+10 ! 9 tracers added
273	ELSE
274	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
275	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
276	END IF
277	END DO
278
279	IF (new_iq /= nqtrue) THEN
280	! The choice of advection schema imposes more tracers
281	! Assigne total number of tracers
282	nqtot = new_iq
283
284	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
285	WRITE(lunout,*) 'makes it necessary to add tracers'
286	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
287	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
288
289	ELSE
290	! The true number of tracers is also the total number
291	nqtot = nqtrue
292	END IF
293
294	!
295	! Allocate variables with total number of tracers, nqtot
296	!
297	ALLOCATE(tname(nqtot), ttext(nqtot))
298	ALLOCATE(iadv(nqtot), niadv(nqtot))
299
300	!-----------------------------------------------------------------------
301	!
302	! 4) Determine iadv, long and short name
303	!
304	!-----------------------------------------------------------------------
305	new_iq=0
306	DO iq=1,nqtrue
307	new_iq=new_iq+1
308
309	! Verify choice of advection schema
310	IF (hadv(iq)==vadv(iq)) THEN
311	iadv(new_iq)=hadv(iq)
312	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
313	iadv(new_iq)=11
314	ELSE
315	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
316
317	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
318	END IF
319
320	str1=tnom_0(iq)
321	tname(new_iq)= tnom_0(iq)
322	IF (iadv(new_iq)==0) THEN
323	ttext(new_iq)=trim(str1)
324	ELSE
325	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
326	END IF
327
328	! schemas tenant compte des moments d'ordre superieur
329	str2=ttext(new_iq)
330	IF (iadv(new_iq)==20) THEN
331	DO jq=1,3
332	new_iq=new_iq+1
333	iadv(new_iq)=-20
334	ttext(new_iq)=trim(str2)//txts(jq)
335	tname(new_iq)=trim(str1)//txts(jq)
336	END DO
337	ELSE IF (iadv(new_iq)==30) THEN
338	DO jq=1,9
339	new_iq=new_iq+1
340	iadv(new_iq)=-30
341	ttext(new_iq)=trim(str2)//txtp(jq)
342	tname(new_iq)=trim(str1)//txtp(jq)
343	END DO
344	END IF
345	END DO
346
347	!
348	! Find vector keeping the correspodence between true and total tracers
349	!
350	niadv(:)=0
351	iiq=0
352	DO iq=1,nqtot
353	IF(iadv(iq).GE.0) THEN
354	! True tracer
355	iiq=iiq+1
356	niadv(iiq)=iq
357	ENDIF
358	END DO
359
360
361	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
362	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
363	DO iq=1,nqtot
364	WRITE(lunout,*) iadv(iq),niadv(iq),&
365	' ',trim(tname(iq)),' ',trim(ttext(iq))
366	END DO
367
368	!
369	! Test for advection schema.
370	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
371	!
372	DO iq=1,nqtot
373	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
374	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
375	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
376	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
377	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
378	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
379	END IF
380	END DO
381
382	!-----------------------------------------------------------------------
383	! Finalize :
384	!
385	DEALLOCATE(tnom_0, hadv, vadv)
386	DEALLOCATE(tracnam)
387
388	END SUBROUTINE infotrac_init
389
390	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format