Context Navigation

infotrac.F90 @ 4400

Last change on this file since 4400 was 1673, checked in by Laurent Fairhead, 12 years ago

Fin du phasage de la dynamique parallele localisee (petite memoire) avec le tronc LMDZ5 r1671
Il reste quelques routines a verifier (en particulier ce qui touche a l'etude des cas academiques)
et la validation a effectuer

End of the phasing of the localised (low memory) parallel dynamics package with the
LMDZ5 trunk (r1671)
Some routines still need some checking (in particular the academic cases) and some
validation is still required

File size: 13.8 KB

Line
1	! $Id$
2	!
3	MODULE infotrac
4
5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
6	INTEGER, SAVE :: nqtot
7
8	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
9	! number of tracers used in the physics
10	INTEGER, SAVE :: nbtr
11
12	! Name variables
13	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
14	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
15
16	! iadv : index of trasport schema for each tracer
17	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
18
19	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
20	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
21	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
22
23	! conv_flg(it)=0 : convection desactivated for tracer number it
24	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
25	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
26	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
27
28	CHARACTER(len=4),SAVE :: type_trac
29
30	CONTAINS
31
32	SUBROUTINE infotrac_init
33	USE control_mod
34	#ifdef REPROBUS
35	USE CHEM_REP, ONLY : Init_chem_rep_trac
36	#endif
37	IMPLICIT NONE
38	!=======================================================================
39	!
40	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
41	! -------
42	! Modif special traceur F.Forget 05/94
43	! Modif M-A Filiberti 02/02 lecture de traceur.def
44	!
45	! Objet:
46	! ------
47	! GCM LMD nouvelle grille
48	!
49	!=======================================================================
50	! ... modification de l'integration de q ( 26/04/94 ) ....
51	!-----------------------------------------------------------------------
52	! Declarations
53
54	INCLUDE "dimensions.h"
55	INCLUDE "iniprint.h"
56
57	! Local variables
58	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
59	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
60
61	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
62	CHARACTER(len=8), ALLOCATABLE, DIMENSION(:) :: tracnam ! name from INCA
63	CHARACTER(len=3), DIMENSION(30) :: descrq
64	CHARACTER(len=1), DIMENSION(3) :: txts
65	CHARACTER(len=2), DIMENSION(9) :: txtp
66	CHARACTER(len=23) :: str1,str2
67
68	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
69	INTEGER :: iq, new_iq, iiq, jq, ierr
70
71	character(len=*),parameter :: modname="infotrac_init"
72	!-----------------------------------------------------------------------
73	! Initialization :
74	!
75	txts=(/'x','y','z'/)
76	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
77
78	descrq(14)='VLH'
79	descrq(10)='VL1'
80	descrq(11)='VLP'
81	descrq(12)='FH1'
82	descrq(13)='FH2'
83	descrq(16)='PPM'
84	descrq(17)='PPS'
85	descrq(18)='PPP'
86	descrq(20)='SLP'
87	descrq(30)='PRA'
88
89
90	! Coherence test between parameter type_trac, config_inca and preprocessing keys
91	IF (type_trac=='inca') THEN
92	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
93	type_trac,' config_inca=',config_inca
94	IF (config_inca/='aero' .AND. config_inca/='chem') THEN
95	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
96	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
97	END IF
98	#ifndef INCA
99	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
100	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
101	#endif
102	ELSE IF (type_trac=='repr') THEN
103	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
104	#ifndef REPROBUS
105	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
106	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
107	#endif
108	ELSE IF (type_trac == 'lmdz') THEN
109	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
110	ELSE
111	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
112	CALL abort_gcm('infotrac_init','bad parameter',1)
113	END IF
114
115
116	! Test if config_inca is other then none for run without INCA
117	IF (type_trac/='inca' .AND. config_inca/='none') THEN
118	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
119	config_inca='none'
120	END IF
121
122
123	!-----------------------------------------------------------------------
124	!
125	! 1) Get the true number of tracers + water vapor/liquid
126	! Here true tracers (nqtrue) means declared tracers (only first order)
127	!
128	!-----------------------------------------------------------------------
129	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
130	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
131	IF(ierr.EQ.0) THEN
132	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
133	READ(90,*) nqtrue
134	ELSE
135	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
136	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
137	if (planet_type=='earth') then
138	nqtrue=4 ! Default value for Earth
139	else
140	nqtrue=1 ! Default value for other planets
141	endif
142	END IF
143	if ( planet_type=='earth') then
144	! For Earth, water vapour & liquid tracers are not in the physics
145	nbtr=nqtrue-2
146	else
147	! Other planets (for now); we have the same number of tracers
148	! in the dynamics than in the physics
149	nbtr=nqtrue
150	endif
151	ELSE ! type_trac=inca
152	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
153	nqtrue=nbtr+2
154	END IF
155
156	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
157	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
158	CALL abort_gcm('infotrac_init','Not enough tracers',1)
159	END IF
160
161	! Transfert number of tracers to Reprobus
162	IF (type_trac == 'repr') THEN
163	#ifdef REPROBUS
164	CALL Init_chem_rep_trac(nbtr)
165	#endif
166	END IF
167
168	!
169	! Allocate variables depending on nqtrue and nbtr
170	!
171	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue))
172	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), tracnam(nbtr))
173	conv_flg(:) = 1 ! convection activated for all tracers
174	pbl_flg(:) = 1 ! boundary layer activated for all tracers
175
176	!-----------------------------------------------------------------------
177	! 2) Choix des schemas d'advection pour l'eau et les traceurs
178	!
179	! iadv = 1 schema transport type "humidite specifique LMD"
180	! iadv = 2 schema amont
181	! iadv = 14 schema Van-leer + humidite specifique
182	! Modif F.Codron
183	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
184	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
185	! iadv = 12 schema Frederic Hourdin I
186	! iadv = 13 schema Frederic Hourdin II
187	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
188	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
189	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
190	! iadv = 20 schema Slopes
191	! iadv = 30 schema Prather
192	!
193	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
194	! iq = 2 pour l'eau liquide
195	! Et eventuellement iq = 3,nqtot pour les autres traceurs
196	!
197	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
198	!------------------------------------------------------------------------
199	!
200	! Get choice of advection schema from file tracer.def or from INCA
201	!---------------------------------------------------------------------
202	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
203	IF(ierr.EQ.0) THEN
204	! Continue to read tracer.def
205	DO iq=1,nqtrue
206	READ(90,*) hadv(iq),vadv(iq),tnom_0(iq)
207	END DO
208	CLOSE(90)
209	ELSE ! Without tracer.def, set default values
210	if (planet_type=="earth") then
211	! for Earth, default is to have 4 tracers
212	hadv(1) = 14
213	vadv(1) = 14
214	tnom_0(1) = 'H2Ov'
215	hadv(2) = 10
216	vadv(2) = 10
217	tnom_0(2) = 'H2Ol'
218	hadv(3) = 10
219	vadv(3) = 10
220	tnom_0(3) = 'RN'
221	hadv(4) = 10
222	vadv(4) = 10
223	tnom_0(4) = 'PB'
224	else ! default for other planets
225	hadv(1) = 10
226	vadv(1) = 10
227	tnom_0(1) = 'dummy'
228	endif ! of if (planet_type=="earth")
229	END IF
230
231	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
232	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
233	DO iq=1,nqtrue
234	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq)
235	END DO
236
237	ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
238	! le module de chimie fournit les noms des traceurs
239	! et les schemas d'advection associes.
240
241	#ifdef INCA
242	CALL init_transport( &
243	hadv, &
244	vadv, &
245	conv_flg, &
246	pbl_flg, &
247	tracnam)
248	#endif
249	tnom_0(1)='H2Ov'
250	tnom_0(2)='H2Ol'
251
252	DO iq =3,nqtrue
253	tnom_0(iq)=tracnam(iq-2)
254	END DO
255
256	END IF ! type_trac
257
258	!-----------------------------------------------------------------------
259	!
260	! 3) Verify if advection schema 20 or 30 choosen
261	! Calculate total number of tracers needed: nqtot
262	! Allocate variables depending on total number of tracers
263	!-----------------------------------------------------------------------
264	new_iq=0
265	DO iq=1,nqtrue
266	! Add tracers for certain advection schema
267	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
268	new_iq=new_iq+1 ! no tracers added
269	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
270	new_iq=new_iq+4 ! 3 tracers added
271	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
272	new_iq=new_iq+10 ! 9 tracers added
273	ELSE
274	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
275	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
276	END IF
277	END DO
278
279	IF (new_iq /= nqtrue) THEN
280	! The choice of advection schema imposes more tracers
281	! Assigne total number of tracers
282	nqtot = new_iq
283
284	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
285	WRITE(lunout,*) 'makes it necessary to add tracers'
286	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
287	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
288
289	ELSE
290	! The true number of tracers is also the total number
291	nqtot = nqtrue
292	END IF
293
294	!
295	! Allocate variables with total number of tracers, nqtot
296	!
297	ALLOCATE(tname(nqtot), ttext(nqtot))
298	ALLOCATE(iadv(nqtot), niadv(nqtot))
299
300	!-----------------------------------------------------------------------
301	!
302	! 4) Determine iadv, long and short name
303	!
304	!-----------------------------------------------------------------------
305	new_iq=0
306	DO iq=1,nqtrue
307	new_iq=new_iq+1
308
309	! Verify choice of advection schema
310	IF (hadv(iq)==vadv(iq)) THEN
311	iadv(new_iq)=hadv(iq)
312	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
313	iadv(new_iq)=11
314	ELSE
315	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
316
317	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
318	END IF
319
320	str1=tnom_0(iq)
321	tname(new_iq)= tnom_0(iq)
322	IF (iadv(new_iq)==0) THEN
323	ttext(new_iq)=trim(str1)
324	ELSE
325	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
326	END IF
327
328	! schemas tenant compte des moments d'ordre superieur
329	str2=ttext(new_iq)
330	IF (iadv(new_iq)==20) THEN
331	DO jq=1,3
332	new_iq=new_iq+1
333	iadv(new_iq)=-20
334	ttext(new_iq)=trim(str2)//txts(jq)
335	tname(new_iq)=trim(str1)//txts(jq)
336	END DO
337	ELSE IF (iadv(new_iq)==30) THEN
338	DO jq=1,9
339	new_iq=new_iq+1
340	iadv(new_iq)=-30
341	ttext(new_iq)=trim(str2)//txtp(jq)
342	tname(new_iq)=trim(str1)//txtp(jq)
343	END DO
344	END IF
345	END DO
346
347	!
348	! Find vector keeping the correspodence between true and total tracers
349	!
350	niadv(:)=0
351	iiq=0
352	DO iq=1,nqtot
353	IF(iadv(iq).GE.0) THEN
354	! True tracer
355	iiq=iiq+1
356	niadv(iiq)=iq
357	ENDIF
358	END DO
359
360
361	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
362	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
363	DO iq=1,nqtot
364	WRITE(lunout,*) iadv(iq),niadv(iq),&
365	' ',trim(tname(iq)),' ',trim(ttext(iq))
366	END DO
367
368	!
369	! Test for advection schema.
370	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
371	!
372	DO iq=1,nqtot
373	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
374	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
375	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
376	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
377	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
378	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
379	END IF
380	END DO
381
382	!-----------------------------------------------------------------------
383	! Finalize :
384	!
385	DEALLOCATE(tnom_0, hadv, vadv)
386	DEALLOCATE(tracnam)
387
388	END SUBROUTINE infotrac_init
389
390	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format