source: LMDZ5/branches/IPSLCM6.0.11pre/libf/phylmd/stdlevvar.F90 @ 3957

!
! $Header$
!
      SUBROUTINE stdlevvar(klon, knon, nsrf, zxli, &
                           u1, v1, t1, q1, z1, &
                           ts1, qsurf, z0m, z0h, psol, pat1, &
                           t_2m, q_2m, t_10m, q_10m, u_10m, ustar)
      IMPLICIT NONE
!-------------------------------------------------------------------------
!
! Objet : calcul de la temperature et l'humidite relative a 2m et du 
!         module du vent a 10m a partir des relations de Dyer-Businger et
!         des equations de Louis.
!
! Reference : Hess, Colman et McAvaney (1995)        
!
! I. Musat, 01.07.2002
!
!AM On rajoute en sortie t et q a 10m pr le calcule d'hbtm2 dans clmain
!
!-------------------------------------------------------------------------
!
! klon----input-I- dimension de la grille physique (= nb_pts_latitude X nb_pts_longitude)
! knon----input-I- nombre de points pour un type de surface
! nsrf----input-I- indice pour le type de surface; voir indice_sol_mod.F90
! zxli----input-L- TRUE si calcul des cdrags selon Laurent Li
! u1------input-R- vent zonal au 1er niveau du modele
! v1------input-R- vent meridien au 1er niveau du modele
! t1------input-R- temperature de l'air au 1er niveau du modele
! q1------input-R- humidite relative au 1er niveau du modele
! z1------input-R- geopotentiel au 1er niveau du modele
! ts1-----input-R- temperature de l'air a la surface
! qsurf---input-R- humidite relative a la surface
! z0m, z0h---input-R- rugosite
! psol----input-R- pression au sol
! pat1----input-R- pression au 1er niveau du modele
!
! t_2m---output-R- temperature de l'air a 2m
! q_2m---output-R- humidite relative a 2m
! u_10m--output-R- vitesse du vent a 10m
!AM
! t_10m--output-R- temperature de l'air a 10m
! q_10m--output-R- humidite specifique a 10m
! ustar--output-R- u*
!
      INTEGER, intent(in) :: klon, knon, nsrf
      LOGICAL, intent(in) :: zxli
      REAL, dimension(klon), intent(in) :: u1, v1, t1, q1, z1, ts1
      REAL, dimension(klon), intent(in) :: qsurf, z0m, z0h
      REAL, dimension(klon), intent(in) :: psol, pat1
!
      REAL, dimension(klon), intent(out) :: t_2m, q_2m, ustar
      REAL, dimension(klon), intent(out) :: u_10m, t_10m, q_10m
!-------------------------------------------------------------------------
      include "flux_arp.h"
      include "YOMCST.h"
!IM PLUS
      include "YOETHF.h"
!
! Quelques constantes et options:
!
! RKAR : constante de von Karman
      REAL, PARAMETER :: RKAR=0.40
! niter : nombre iterations calcul "corrector"
!     INTEGER, parameter :: niter=6, ncon=niter-1
      INTEGER, parameter :: niter=2, ncon=niter-1
!
! Variables locales
      INTEGER :: i, n
      REAL :: zref
      REAL, dimension(klon) :: speed
! tpot : temperature potentielle
      REAL, dimension(klon) :: tpot
      REAL, dimension(klon) :: zri1, cdran
      REAL, dimension(klon) :: cdram, cdrah
! ri1 : nb. de Richardson entre la surface --> la 1ere couche
      REAL, dimension(klon) :: ri1 
      REAL, dimension(klon) :: testar, qstar
      REAL, dimension(klon) :: zdte, zdq   
! lmon : longueur de Monin-Obukhov selon Hess, Colman and McAvaney 
      DOUBLE PRECISION, dimension(klon) :: lmon
      DOUBLE PRECISION, parameter :: eps=1.0D-20
      REAL, dimension(klon) :: delu, delte, delq
      REAL, dimension(klon) :: u_zref, te_zref, q_zref  
      REAL, dimension(klon) :: temp, pref
      LOGICAL :: okri
      REAL, dimension(klon) :: u_zref_p, te_zref_p, temp_p, q_zref_p
!convertgence
      REAL, dimension(klon) :: te_zref_con, q_zref_con
      REAL, dimension(klon) :: u_zref_c, te_zref_c, temp_c, q_zref_c
      REAL, dimension(klon) :: ok_pred, ok_corr
!     REAL, dimension(klon) :: conv_te, conv_q
!------------------------------------------------------------------------- 
      DO i=1, knon
       speed(i)=SQRT(u1(i)**2+v1(i)**2)
       ri1(i) = 0.0
      ENDDO
!
      okri=.FALSE.
!      CALL coefcdrag(klon, knon, nsrf, zxli, &
! &                   speed, t1, q1, z1, psol, &
! &                   ts1, qsurf, rugos, okri, ri1,  &         
! &                   cdram, cdrah, cdran, zri1, pref)            
! Fuxing WANG, 04/03/2015, replace the coefcdrag by the merged version: cdrag

      CALL cdrag(knon, nsrf, &
 &                   speed, t1, q1, z1, &
 &                   psol, ts1, qsurf, z0m, z0h, &
 &                   cdram, cdrah, zri1, pref)

! --- special Dice: on force cdragm ( a defaut de forcer ustar) MPL 05082013
     IF (ok_prescr_ust) then
      DO i = 1, knon
       print *,'cdram avant=',cdram(i)
       cdram(i) = ust*ust/speed(i)/speed(i)
       print *,'cdram ust speed apres=',cdram(i),ust,speed
      ENDDO
     ENDIF
!
!---------Star variables----------------------------------------------------
!
      DO i = 1, knon
        ri1(i) = zri1(i)
        tpot(i) = t1(i)* (psol(i)/pat1(i))**RKAPPA
        ustar(i) = sqrt(cdram(i) * speed(i) * speed(i))
        zdte(i) = tpot(i) - ts1(i)
        zdq(i) = max(q1(i),0.0) - max(qsurf(i),0.0)
!
!
!IM BUG BUG BUG       zdte(i) = max(zdte(i),1.e-10)
        zdte(i) = sign(max(abs(zdte(i)),1.e-10),zdte(i))
!
        testar(i) = (cdrah(i) * zdte(i) * speed(i))/ustar(i)
        qstar(i) = (cdrah(i) * zdq(i) * speed(i))/ustar(i)
        lmon(i) = (ustar(i) * ustar(i) * tpot(i))/ &
 &                (RKAR * RG * testar(i))
      ENDDO
!
!----------First aproximation of variables at zref --------------------------
      zref = 2.0
      CALL screenp(klon, knon, nsrf, speed, tpot, q1, &
 &                 ts1, qsurf, z0m, lmon, &
 &                 ustar, testar, qstar, zref, &
 &                 delu, delte, delq)
!
      DO i = 1, knon
        u_zref(i) = delu(i)
        q_zref(i) = max(qsurf(i),0.0) + delq(i)
        te_zref(i) = ts1(i) + delte(i)
        temp(i) = te_zref(i) * (psol(i)/pat1(i))**(-RKAPPA)
        q_zref_p(i) = q_zref(i)
!       te_zref_p(i) = te_zref(i)
        temp_p(i) = temp(i)
      ENDDO
!
! Iteration of the variables at the reference level zref : corrector calculation ; see Hess & McAvaney, 1995 
!
      DO n = 1, niter
!
        okri=.TRUE.
        CALL screenc(klon, knon, nsrf, zxli, &
 &                   u_zref, temp, q_zref, zref, &
 &                   ts1, qsurf, z0m, z0h, psol, &           
 &                   ustar, testar, qstar, okri, ri1, &
 &                   pref, delu, delte, delq) 
!
        DO i = 1, knon
          u_zref(i) = delu(i)
          q_zref(i) = delq(i) + max(qsurf(i),0.0)
          te_zref(i) = delte(i) + ts1(i) 
!
! return to normal temperature
!
          temp(i) = te_zref(i) * (psol(i)/pref(i))**(-RKAPPA)
!         temp(i) = te_zref(i) - (zref* RG)/RCPD/ &
!                 (1 + RVTMP2 * max(q_zref(i),0.0))
!
!IM +++
!         IF(temp(i).GT.350.) THEN
!           WRITE(*,*) 'temp(i) GT 350 K !!',i,nsrf,temp(i)
!         ENDIF
!IM ---
!
        IF(n.EQ.ncon) THEN
          te_zref_con(i) = te_zref(i)
          q_zref_con(i) = q_zref(i)
        ENDIF 
!
        ENDDO 
!
      ENDDO 
!
! verifier le critere de convergence : 0.25% pour te_zref et 5% pour qe_zref
!
!       DO i = 1, knon
!         conv_te(i) = (te_zref(i) - te_zref_con(i))/te_zref_con(i)
!         conv_q(i) = (q_zref(i) - q_zref_con(i))/q_zref_con(i)
!IM +++
!         IF(abs(conv_te(i)).GE.0.0025.AND.abs(conv_q(i)).GE.0.05) THEN
!           PRINT*,'DIV','i=',i,te_zref_con(i),te_zref(i),conv_te(i), &
!           q_zref_con(i),q_zref(i),conv_q(i)
!         ENDIF
!IM ---
!       ENDDO
!
      DO i = 1, knon
        q_zref_c(i) = q_zref(i)
        temp_c(i) = temp(i)
!
!       IF(zri1(i).LT.0.) THEN
!         IF(nsrf.EQ.1) THEN
!           ok_pred(i)=1.
!           ok_corr(i)=0.
!         ELSE
!           ok_pred(i)=0.
!           ok_corr(i)=1.
!         ENDIF
!       ELSE
!         ok_pred(i)=0.
!         ok_corr(i)=1.
!       ENDIF
!
        ok_pred(i)=0.
        ok_corr(i)=1.
!
        t_2m(i) = temp_p(i) * ok_pred(i) + temp_c(i) * ok_corr(i)
        q_2m(i) = q_zref_p(i) * ok_pred(i) + q_zref_c(i) * ok_corr(i)
!IM +++
!       IF(n.EQ.niter) THEN
!       IF(t_2m(i).LT.t1(i).AND.t_2m(i).LT.ts1(i)) THEN
!         PRINT*,' BAD t2m LT ',i,nsrf,t_2m(i),t1(i),ts1(i) 
!       ELSEIF(t_2m(i).GT.t1(i).AND.t_2m(i).GT.ts1(i)) THEN
!         PRINT*,' BAD t2m GT ',i,nsrf,t_2m(i),t1(i),ts1(i) 
!       ENDIF
!       ENDIF
!IM ---
      ENDDO
!
!
!----------First aproximation of variables at zref --------------------------
!
      zref = 10.0
      CALL screenp(klon, knon, nsrf, speed, tpot, q1, &
 &                 ts1, qsurf, z0m, lmon, &
 &                 ustar, testar, qstar, zref, &
 &                 delu, delte, delq)
!
      DO i = 1, knon
        u_zref(i) = delu(i)
        q_zref(i) = max(qsurf(i),0.0) + delq(i)
        te_zref(i) = ts1(i) + delte(i)
        temp(i) = te_zref(i) * (psol(i)/pat1(i))**(-RKAPPA)
!       temp(i) = te_zref(i) - (zref* RG)/RCPD/ &
!                 (1 + RVTMP2 * max(q_zref(i),0.0))
        u_zref_p(i) = u_zref(i)
      ENDDO
!
! Iteration of the variables at the reference level zref : corrector ; see Hess & McAvaney, 1995 
!
      DO n = 1, niter
!
        okri=.TRUE.
        CALL screenc(klon, knon, nsrf, zxli, &
 &                   u_zref, temp, q_zref, zref, &
 &                   ts1, qsurf, z0m, z0h, psol, &
 &                   ustar, testar, qstar, okri, ri1, &
 &                   pref, delu, delte, delq)
!
        DO i = 1, knon
          u_zref(i) = delu(i)
          q_zref(i) = delq(i) + max(qsurf(i),0.0)
          te_zref(i) = delte(i) + ts1(i)
          temp(i) = te_zref(i) * (psol(i)/pref(i))**(-RKAPPA)
!         temp(i) = te_zref(i) - (zref* RG)/RCPD/ &
!                   (1 + RVTMP2 * max(q_zref(i),0.0))
        ENDDO 
!
      ENDDO
!
      DO i = 1, knon
        u_zref_c(i) = u_zref(i)
!
        u_10m(i) = u_zref_p(i) * ok_pred(i) + u_zref_c(i) * ok_corr(i)
!
!AM
        q_zref_c(i) = q_zref(i)
        temp_c(i) = temp(i)
        t_10m(i) = temp_p(i) * ok_pred(i) + temp_c(i) * ok_corr(i)
        q_10m(i) = q_zref_p(i) * ok_pred(i) + q_zref_c(i) * ok_corr(i)
!MA
      ENDDO
! 
      RETURN
      END subroutine stdlevvar