| 1 | ! |
|---|
| 2 | ! $Id: $ |
|---|
| 3 | ! |
|---|
| 4 | MODULE inigeomphy_mod |
|---|
| 5 | |
|---|
| 6 | CONTAINS |
|---|
| 7 | |
|---|
| 8 | SUBROUTINE inigeomphy(iim,jjm,nlayer, & |
|---|
| 9 | nbp, communicator, & |
|---|
| 10 | rlatu,rlatv,rlonu,rlonv,aire,cu,cv) |
|---|
| 11 | USE mod_grid_phy_lmdz, ONLY: klon_glo, & ! number of atmospheric columns (on full grid) |
|---|
| 12 | regular_lonlat, & ! regular longitude-latitude grid type |
|---|
| 13 | nbp_lon, nbp_lat, nbp_lev |
|---|
| 14 | USE mod_phys_lmdz_para, ONLY: klon_omp, & ! number of columns (on local omp grid) |
|---|
| 15 | klon_omp_begin, & ! start index of local omp subgrid |
|---|
| 16 | klon_omp_end, & ! end index of local omp subgrid |
|---|
| 17 | klon_mpi_begin ! start indes of columns (on local mpi grid) |
|---|
| 18 | USE geometry_mod, ONLY : init_geometry |
|---|
| 19 | USE physics_distribution_mod, ONLY : init_physics_distribution |
|---|
| 20 | USE regular_lonlat_mod, ONLY : init_regular_lonlat, & |
|---|
| 21 | east, west, north, south, & |
|---|
| 22 | north_east, north_west, & |
|---|
| 23 | south_west, south_east |
|---|
| 24 | USE mod_interface_dyn_phys, ONLY : init_interface_dyn_phys |
|---|
| 25 | USE nrtype, ONLY: pi |
|---|
| 26 | USE comvert_mod, ONLY: preff, ap, bp, aps, bps, presnivs, & |
|---|
| 27 | scaleheight, pseudoalt |
|---|
| 28 | USE vertical_layers_mod, ONLY: init_vertical_layers |
|---|
| 29 | IMPLICIT NONE |
|---|
| 30 | |
|---|
| 31 | ! ======================================================================= |
|---|
| 32 | ! Initialisation of the physical constants and some positional and |
|---|
| 33 | ! geometrical arrays for the physics |
|---|
| 34 | ! ======================================================================= |
|---|
| 35 | |
|---|
| 36 | include "iniprint.h" |
|---|
| 37 | |
|---|
| 38 | INTEGER, INTENT (IN) :: nlayer ! number of atmospheric layers |
|---|
| 39 | INTEGER, INTENT (IN) :: iim ! number of atmospheric columns along longitudes |
|---|
| 40 | INTEGER, INTENT (IN) :: jjm ! number of atompsheric columns along latitudes |
|---|
| 41 | INTEGER, INTENT(IN) :: nbp ! number of physics columns for this MPI process |
|---|
| 42 | INTEGER, INTENT(IN) :: communicator ! MPI communicator |
|---|
| 43 | REAL, INTENT (IN) :: rlatu(jjm+1) ! latitudes of the physics grid |
|---|
| 44 | REAL, INTENT (IN) :: rlatv(jjm) ! latitude boundaries of the physics grid |
|---|
| 45 | REAL, INTENT (IN) :: rlonv(iim+1) ! longitudes of the physics grid |
|---|
| 46 | REAL, INTENT (IN) :: rlonu(iim+1) ! longitude boundaries of the physics grid |
|---|
| 47 | REAL, INTENT (IN) :: aire(iim+1,jjm+1) ! area of the dynamics grid (m2) |
|---|
| 48 | REAL, INTENT (IN) :: cu((iim+1)*(jjm+1)) ! cu coeff. (u_covariant = cu * u) |
|---|
| 49 | REAL, INTENT (IN) :: cv((iim+1)*jjm) ! cv coeff. (v_covariant = cv * v) |
|---|
| 50 | |
|---|
| 51 | INTEGER :: ibegin, iend, offset |
|---|
| 52 | INTEGER :: i,j,k |
|---|
| 53 | CHARACTER (LEN=20) :: modname = 'inigeomphy' |
|---|
| 54 | CHARACTER (LEN=80) :: abort_message |
|---|
| 55 | REAL :: total_area_phy, total_area_dyn |
|---|
| 56 | |
|---|
| 57 | ! boundaries, on global grid |
|---|
| 58 | REAL,ALLOCATABLE :: boundslon_reg(:,:) |
|---|
| 59 | REAL,ALLOCATABLE :: boundslat_reg(:,:) |
|---|
| 60 | |
|---|
| 61 | ! global array, on full physics grid: |
|---|
| 62 | REAL,ALLOCATABLE :: latfi_glo(:) |
|---|
| 63 | REAL,ALLOCATABLE :: lonfi_glo(:) |
|---|
| 64 | REAL,ALLOCATABLE :: cufi_glo(:) |
|---|
| 65 | REAL,ALLOCATABLE :: cvfi_glo(:) |
|---|
| 66 | REAL,ALLOCATABLE :: airefi_glo(:) |
|---|
| 67 | REAL,ALLOCATABLE :: boundslonfi_glo(:,:) |
|---|
| 68 | REAL,ALLOCATABLE :: boundslatfi_glo(:,:) |
|---|
| 69 | |
|---|
| 70 | ! local arrays, on given MPI/OpenMP domain: |
|---|
| 71 | REAL,ALLOCATABLE,SAVE :: latfi(:) |
|---|
| 72 | REAL,ALLOCATABLE,SAVE :: lonfi(:) |
|---|
| 73 | REAL,ALLOCATABLE,SAVE :: cufi(:) |
|---|
| 74 | REAL,ALLOCATABLE,SAVE :: cvfi(:) |
|---|
| 75 | REAL,ALLOCATABLE,SAVE :: airefi(:) |
|---|
| 76 | REAL,ALLOCATABLE,SAVE :: boundslonfi(:,:) |
|---|
| 77 | REAL,ALLOCATABLE,SAVE :: boundslatfi(:,:) |
|---|
| 78 | !$OMP THREADPRIVATE (latfi,lonfi,cufi,cvfi,airefi,boundslonfi,boundslatfi) |
|---|
| 79 | |
|---|
| 80 | ! Initialize Physics distibution and parameters and interface with dynamics |
|---|
| 81 | IF (iim*jjm>1) THEN ! general 3D case |
|---|
| 82 | CALL init_physics_distribution(regular_lonlat,4, & |
|---|
| 83 | nbp,iim,jjm+1,nlayer,communicator) |
|---|
| 84 | ELSE ! For 1D model |
|---|
| 85 | CALL init_physics_distribution(regular_lonlat,4, & |
|---|
| 86 | 1,1,1,nlayer,communicator) |
|---|
| 87 | ENDIF |
|---|
| 88 | CALL init_interface_dyn_phys |
|---|
| 89 | |
|---|
| 90 | ! init regular global longitude-latitude grid points and boundaries |
|---|
| 91 | ALLOCATE(boundslon_reg(iim,2)) |
|---|
| 92 | ALLOCATE(boundslat_reg(jjm+1,2)) |
|---|
| 93 | |
|---|
| 94 | DO i=1,iim |
|---|
| 95 | boundslon_reg(i,east)=rlonu(i) |
|---|
| 96 | boundslon_reg(i,west)=rlonu(i+1) |
|---|
| 97 | ENDDO |
|---|
| 98 | |
|---|
| 99 | boundslat_reg(1,north)= PI/2 |
|---|
| 100 | boundslat_reg(1,south)= rlatv(1) |
|---|
| 101 | DO j=2,jjm |
|---|
| 102 | boundslat_reg(j,north)=rlatv(j-1) |
|---|
| 103 | boundslat_reg(j,south)=rlatv(j) |
|---|
| 104 | ENDDO |
|---|
| 105 | boundslat_reg(jjm+1,north)= rlatv(jjm) |
|---|
| 106 | boundslat_reg(jjm+1,south)= -PI/2 |
|---|
| 107 | |
|---|
| 108 | ! Write values in module regular_lonlat_mod |
|---|
| 109 | CALL init_regular_lonlat(iim,jjm+1, rlonv(1:iim), rlatu, & |
|---|
| 110 | boundslon_reg, boundslat_reg) |
|---|
| 111 | |
|---|
| 112 | ! Generate global arrays on full physics grid |
|---|
| 113 | ALLOCATE(latfi_glo(klon_glo),lonfi_glo(klon_glo)) |
|---|
| 114 | ALLOCATE(cufi_glo(klon_glo),cvfi_glo(klon_glo)) |
|---|
| 115 | ALLOCATE(airefi_glo(klon_glo)) |
|---|
| 116 | ALLOCATE(boundslonfi_glo(klon_glo,4)) |
|---|
| 117 | ALLOCATE(boundslatfi_glo(klon_glo,4)) |
|---|
| 118 | |
|---|
| 119 | IF (klon_glo>1) THEN ! general case |
|---|
| 120 | ! North pole |
|---|
| 121 | latfi_glo(1)=rlatu(1) |
|---|
| 122 | lonfi_glo(1)=0. |
|---|
| 123 | cufi_glo(1) = cu(1) |
|---|
| 124 | cvfi_glo(1) = cv(1) |
|---|
| 125 | boundslonfi_glo(1,north_east)=0 |
|---|
| 126 | boundslatfi_glo(1,north_east)=PI/2 |
|---|
| 127 | boundslonfi_glo(1,north_west)=2*PI |
|---|
| 128 | boundslatfi_glo(1,north_west)=PI/2 |
|---|
| 129 | boundslonfi_glo(1,south_west)=2*PI |
|---|
| 130 | boundslatfi_glo(1,south_west)=rlatv(1) |
|---|
| 131 | boundslonfi_glo(1,south_east)=0 |
|---|
| 132 | boundslatfi_glo(1,south_east)=rlatv(1) |
|---|
| 133 | DO j=2,jjm |
|---|
| 134 | DO i=1,iim |
|---|
| 135 | k=(j-2)*iim+1+i |
|---|
| 136 | latfi_glo(k)= rlatu(j) |
|---|
| 137 | lonfi_glo(k)= rlonv(i) |
|---|
| 138 | cufi_glo(k) = cu((j-1)*(iim+1)+i) |
|---|
| 139 | cvfi_glo(k) = cv((j-1)*(iim+1)+i) |
|---|
| 140 | boundslonfi_glo(k,north_east)=rlonu(i) |
|---|
| 141 | boundslatfi_glo(k,north_east)=rlatv(j-1) |
|---|
| 142 | boundslonfi_glo(k,north_west)=rlonu(i+1) |
|---|
| 143 | boundslatfi_glo(k,north_west)=rlatv(j-1) |
|---|
| 144 | boundslonfi_glo(k,south_west)=rlonu(i+1) |
|---|
| 145 | boundslatfi_glo(k,south_west)=rlatv(j) |
|---|
| 146 | boundslonfi_glo(k,south_east)=rlonu(i) |
|---|
| 147 | boundslatfi_glo(k,south_east)=rlatv(j) |
|---|
| 148 | ENDDO |
|---|
| 149 | ENDDO |
|---|
| 150 | ! South pole |
|---|
| 151 | latfi_glo(klon_glo)= rlatu(jjm+1) |
|---|
| 152 | lonfi_glo(klon_glo)= 0. |
|---|
| 153 | cufi_glo(klon_glo) = cu((iim+1)*jjm+1) |
|---|
| 154 | cvfi_glo(klon_glo) = cv((iim+1)*jjm-iim) |
|---|
| 155 | boundslonfi_glo(klon_glo,north_east)= 0 |
|---|
| 156 | boundslatfi_glo(klon_glo,north_east)= rlatv(jjm) |
|---|
| 157 | boundslonfi_glo(klon_glo,north_west)= 2*PI |
|---|
| 158 | boundslatfi_glo(klon_glo,north_west)= rlatv(jjm) |
|---|
| 159 | boundslonfi_glo(klon_glo,south_west)= 2*PI |
|---|
| 160 | boundslatfi_glo(klon_glo,south_west)= -PI/2 |
|---|
| 161 | boundslonfi_glo(klon_glo,south_east)= 0 |
|---|
| 162 | boundslatfi_glo(klon_glo,south_east)= -Pi/2 |
|---|
| 163 | |
|---|
| 164 | ! build airefi(), mesh area on physics grid |
|---|
| 165 | CALL gr_dyn_fi(1,iim+1,jjm+1,klon_glo,aire,airefi_glo) |
|---|
| 166 | ! Poles are single points on physics grid |
|---|
| 167 | airefi_glo(1)=sum(aire(1:iim,1)) |
|---|
| 168 | airefi_glo(klon_glo)=sum(aire(1:iim,jjm+1)) |
|---|
| 169 | |
|---|
| 170 | ! Sanity check: do total planet area match between physics and dynamics? |
|---|
| 171 | total_area_dyn=sum(aire(1:iim,1:jjm+1)) |
|---|
| 172 | total_area_phy=sum(airefi_glo(1:klon_glo)) |
|---|
| 173 | IF (total_area_dyn/=total_area_phy) THEN |
|---|
| 174 | WRITE (lunout, *) 'inigeomphy: planet total surface discrepancy !!!' |
|---|
| 175 | WRITE (lunout, *) ' in the dynamics total_area_dyn=', total_area_dyn |
|---|
| 176 | WRITE (lunout, *) ' but in the physics total_area_phy=', total_area_phy |
|---|
| 177 | IF (abs(total_area_dyn-total_area_phy)>0.00001*total_area_dyn) THEN |
|---|
| 178 | ! stop here if the relative difference is more than 0.001% |
|---|
| 179 | abort_message = 'planet total surface discrepancy' |
|---|
| 180 | CALL abort_gcm(modname, abort_message, 1) |
|---|
| 181 | ENDIF |
|---|
| 182 | ENDIF |
|---|
| 183 | ELSE ! klon_glo==1, running the 1D model |
|---|
| 184 | ! just copy over input values |
|---|
| 185 | latfi_glo(1)=rlatu(1) |
|---|
| 186 | lonfi_glo(1)=rlonv(1) |
|---|
| 187 | cufi_glo(1)=cu(1) |
|---|
| 188 | cvfi_glo(1)=cv(1) |
|---|
| 189 | airefi_glo(1)=aire(1,1) |
|---|
| 190 | boundslonfi_glo(1,north_east)=rlonu(1) |
|---|
| 191 | boundslatfi_glo(1,north_east)=PI/2 |
|---|
| 192 | boundslonfi_glo(1,north_west)=rlonu(2) |
|---|
| 193 | boundslatfi_glo(1,north_west)=PI/2 |
|---|
| 194 | boundslonfi_glo(1,south_west)=rlonu(2) |
|---|
| 195 | boundslatfi_glo(1,south_west)=rlatv(1) |
|---|
| 196 | boundslonfi_glo(1,south_east)=rlonu(1) |
|---|
| 197 | boundslatfi_glo(1,south_east)=rlatv(1) |
|---|
| 198 | ENDIF ! of IF (klon_glo>1) |
|---|
| 199 | |
|---|
| 200 | !$OMP PARALLEL |
|---|
| 201 | ! Now generate local lon/lat/cu/cv/area/bounds arrays |
|---|
| 202 | ALLOCATE(latfi(klon_omp),lonfi(klon_omp),cufi(klon_omp),cvfi(klon_omp)) |
|---|
| 203 | ALLOCATE(airefi(klon_omp)) |
|---|
| 204 | ALLOCATE(boundslonfi(klon_omp,4)) |
|---|
| 205 | ALLOCATE(boundslatfi(klon_omp,4)) |
|---|
| 206 | |
|---|
| 207 | |
|---|
| 208 | offset = klon_mpi_begin - 1 |
|---|
| 209 | airefi(1:klon_omp) = airefi_glo(offset+klon_omp_begin:offset+klon_omp_end) |
|---|
| 210 | cufi(1:klon_omp) = cufi_glo(offset+klon_omp_begin:offset+klon_omp_end) |
|---|
| 211 | cvfi(1:klon_omp) = cvfi_glo(offset+klon_omp_begin:offset+klon_omp_end) |
|---|
| 212 | lonfi(1:klon_omp) = lonfi_glo(offset+klon_omp_begin:offset+klon_omp_end) |
|---|
| 213 | latfi(1:klon_omp) = latfi_glo(offset+klon_omp_begin:offset+klon_omp_end) |
|---|
| 214 | boundslonfi(1:klon_omp,:) = boundslonfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:) |
|---|
| 215 | boundslatfi(1:klon_omp,:) = boundslatfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:) |
|---|
| 216 | |
|---|
| 217 | ! copy over local grid longitudes and latitudes |
|---|
| 218 | CALL init_geometry(klon_omp,lonfi,latfi,boundslonfi,boundslatfi, & |
|---|
| 219 | airefi,cufi,cvfi) |
|---|
| 220 | |
|---|
| 221 | ! copy over preff , ap(), bp(), etc |
|---|
| 222 | CALL init_vertical_layers(nlayer,preff,scaleheight, & |
|---|
| 223 | ap,bp,aps,bps,presnivs,pseudoalt) |
|---|
| 224 | |
|---|
| 225 | !$OMP END PARALLEL |
|---|
| 226 | |
|---|
| 227 | |
|---|
| 228 | END SUBROUTINE inigeomphy |
|---|
| 229 | |
|---|
| 230 | END MODULE inigeomphy_mod |
|---|
| 231 | |
|---|
