source: LMDZ5/branches/IPSLCM5A2.1_ISO/libf/phylmd/cv3_inicp.F90 @ 5308

Last change on this file since 5308 was 2311, checked in by Ehouarn Millour, 9 years ago

Further modifications to enforce physics/dynamics separation:

  • moved iniprint.h and misc_mod back to dyn3d_common, as these should only be used by dynamics.
  • created print_control_mod in the physics to store flags prt_level, lunout, debug to be local to physics (should be used rather than iniprint.h)
  • created abort_physic.F90 , which does the same job as abort_gcm() did, but should be used instead when in physics.
  • reactivated inifis (turned it into a module, inifis_mod.F90) to initialize physical constants and print_control_mod flags.

EM

  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 3.4 KB
Line 
1SUBROUTINE cv3_inicp()
2
3  ! **************************************************************
4  ! *
5  ! CV3_INIP Lecture des choix de lois de probabilité de mélange*
6  ! et calcul de leurs coefficients normalisés.        *
7  ! *
8  ! written by   : Jean-Yves Grandpeix, 06/06/2006, 19.39.27    *
9  ! modified by :                                               *
10  ! **************************************************************
11  IMPLICIT NONE
12  include "YOMCST2.h"
13
14  INTEGER iflag_clos
15  CHARACTER (LEN=20) :: modname = 'cv3_inicp'
16  CHARACTER (LEN=80) :: abort_message
17
18  ! --   Mixing probability distribution functions
19
20  REAL qcoef1, qcoef2, qff, qfff, qmix, rmix, qmix1, rmix1, qmix2, rmix2, f
21  REAL :: sumcoef,sigma,aire,pdf,mu,df,ff
22
23  qcoef1(f) = tanh(f/gammas)
24  qcoef2(f) = (tanh(f/gammas)+gammas*log(cosh((1.-f)/gammas)/cosh(f/gammas)))
25  qff(f) = max(min(f,1.), 0.)
26  qfff(f) = min(qff(f), scut)
27  qmix1(f) = (tanh((qff(f)-fmax)/gammas)+qcoef1max)/qcoef2max
28  rmix1(f) = (gammas*log(cosh((qff(f)-fmax)/gammas))+qff(f)*qcoef1max)/ &
29    qcoef2max
30  qmix2(f) = -log(1.-qfff(f))/scut
31  rmix2(f) = (qfff(f)+(1.-qff(f))*log(1.-qfff(f)))/scut
32  qmix(f) = qqa1*qmix1(f) + qqa2*qmix2(f)
33  rmix(f) = qqa1*rmix1(f) + qqa2*rmix2(f)
34
35  ! cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
36
37
38  ! ===========================================================================
39  ! READ IN PARAMETERS FOR THE MIXING DISTRIBUTION
40  ! AND PASS THESE THROUGH A COMMON BLOCK TO SUBROUTINE CONVECT etc.
41  ! (Written by V.T.J. Phillips, 20-30/Jan/99)
42  ! ===========================================================================
43
44  ! line 1:  a flag (0 or 1) to decide whether P(F) = 1 or the general P(F)
45  ! is to be
46  ! used, followed by SCUT, which is the cut-off value of F in CONVECT
47  ! line 2:  blank
48  ! line 3:  the coefficients for the linear combination of P(F)s to
49  ! make the general P(F)
50  ! line 4:  blank
51  ! line 5:  gammas, Fmax for the cosh^2 component of P(F)
52  ! line 6:  blank
53  ! line 7:  alphas for the 1st irrational P(F)
54  ! line 8:  blank
55  ! line 9:  betas  for the 2nd irrational P(F)
56
57
58  ! open(57,file='parameter_mix.data')
59
60  ! read(57,*) iflag_clos
61  ! read(57,*) iflag_mix, scut
62  ! read(57,*)
63  ! if(iflag_mix .gt. 0) then
64  ! read(57,*) qqa1, qqa2
65  ! read(57,*)
66  ! read(57,*) gammas, Fmax
67  ! read(57,*)
68  ! read(57,*) alphas
69  ! endif
70  ! close(57)
71
72  IF (iflag_mix>0) THEN
73
74    ! --      Normalize Pdf weights
75
76    sumcoef = qqa1 + qqa2
77    qqa1 = qqa1/sumcoef
78    qqa2 = qqa2/sumcoef
79
80    qcoef1max = qcoef1(fmax)
81    qcoef2max = qcoef2(fmax)
82
83    sigma = 0.
84    aire = 0.0
85    pdf = 0.0
86    mu = 0.0
87    df = 0.0001
88
89    ! do ff = 0.0 + df, 1.0 - 2.*df, df
90    ff = df
91    DO WHILE (ff<=1.0-2.*df)
92      pdf = (qmix(ff+df)-qmix(ff))*(1.-ff)/df
93      aire = aire + (qmix(ff+df)-qmix(ff))*(1.-ff)
94      mu = mu + pdf*ff*df
95      ! c              write(*,*) pdf,  Qmix(ff), aire, ff
96      ff = ff + df
97    END DO
98
99    ! do ff=0.0+df,1.0 - 2.*df,df
100    ff = df
101    DO WHILE (ff<=1.0-2.*df)
102      pdf = (qmix(ff+df)-qmix(ff))*(1.-ff)/df
103      sigma = sigma + pdf*(ff-mu)*(ff-mu)*df
104      ff = ff + df
105    END DO
106    sigma = sqrt(sigma)
107
108    IF (abs(aire-1.0)>0.02) THEN
109      PRINT *, 'WARNING:: AREA OF MIXING PDF IS::', aire
110      abort_message = ''
111      CALL abort_physic(modname, abort_message, 1)
112    ELSE
113      PRINT *, 'Area, mean & std deviation are ::', aire, mu, sigma
114    END IF
115  END IF !  (iflag_mix .gt. 0)
116
117  RETURN
118END SUBROUTINE cv3_inicp
Note: See TracBrowser for help on using the repository browser.