Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

cva_driver.F90 @ 5452

Last change on this file since 5452 was 3331, checked in by acozic, 7 years ago
Add modification for isotopes
Property svn:executable set to ``*
File size: 65.8 KB

Line
1
2	! $Id: cva_driver.F90 2481 2016-03-29 13:39:55Z fhourdin $
3
4	SUBROUTINE cva_driver(len, nd, ndp1, ntra, nloc, k_upper, &
5	iflag_con, iflag_mix, iflag_ice_thermo, iflag_clos, ok_conserv_q, &
6	!! delt, t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
7	delt, comp_threshold, & ! jyg
8	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, & ! jyg
9	u1, v1, tra1, &
10	p1, ph1, &
11	Ale1, Alp1, omega1, &
12	sig1feed1, sig2feed1, wght1, &
13	iflag1, ft1, fq1, fu1, fv1, ftra1, &
14	precip1, kbas1, ktop1, &
15	cbmf1, plcl1, plfc1, wbeff1, &
16	sig1, w01, & !input/output
17	ptop21, sigd1, &
18	ma1, mip1, Vprecip1, Vprecipi1, upwd1, dnwd1, dnwd01, & ! jyg
19	qcondc1, wd1, &
20	cape1, cin1, tvp1, &
21	ftd1, fqd1, &
22	Plim11, Plim21, asupmax1, supmax01, asupmaxmin1, &
23	lalim_conv1, &
24	!! da1,phi1,mp1,phi21,d1a1,dam1,sigij1,clw1, & ! RomP
25	!! elij1,evap1,ep1,epmlmMm1,eplaMm1, & ! RomP
26	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, wghti1, & ! RomP, RL
27	clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP, RL
28	wdtrainA1, wdtrainM1, qtc1, sigt1, tau_cld_cv, &
29	coefw_cld_cv, & ! RomP, AJ
30	epmax_diag1 & ! epmax_cape
31	#ifdef ISO
32	& ,xt1,xt1_wake,fxt1, xtprecip1,fxtd1 &
33	& ,xtVprecip1,xtVprecipi1 &
34	#ifdef DIAGISO
35	& , water1,xtwater1,qp1,xtp1,xtevap1 &
36	& , xtclw1 &
37	& , wdtrain1,xtwdtrain1,tp1 &
38	& , taux_cond_conv1 &
39	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
40	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1 &
41	& , fxt_evapprecip1,Mi1,Amp_diag1,tg_save1 &
42	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
43	#endif
44	#endif
45	& )
46	! **************************************************************
47	! *
48	! CV_DRIVER *
49	! *
50	! *
51	! written by : Sandrine Bony-Lena , 17/05/2003, 11.19.41 *
52	! modified by : *
53	! **************************************************************
54	! **************************************************************
55
56	USE dimphy
57	USE print_control_mod, ONLY: prt_level, lunout
58	#ifdef ISO
59	USE infotrac_phy, ONLY: ntraciso,niso,niso,index_trac,ntraceurs_zone
60	USE isotopes_mod, ONLY: iso_eau,iso_HDO,ridicule,bidouille_anti_divergence
61	#ifdef ISOVERIF
62	use isotopes_verif_mod, ONLY: errmax,errmaxrel,Tmin_verif,deltalim, &
63	& iso_verif_egalite_choix,iso_verif_aberrant_choix,iso_verif_aberrant, &
64	& iso_verif_egalite,iso_verif_noNaN,iso_verif_positif_nostop,iso_verif_noNaN_nostop
65	#endif
66	#ifdef ISOTRAC
67	use isotrac_mod, only: option_traceurs,izone_ddft,izone_revap, &
68	& izone_poubelle, index_zone,option_tmin,izone_cond
69	#ifdef ISOVERIF
70	USE isotopes_verif_mod, ONLY: iso_verif_traceur,iso_verif_traceur_justmass, &
71	& iso_verif_trac_masse_vect
72	use isotrac_routines_mod, ONLY: iso_verif_traceur_pbidouille
73	#endif
74	#endif
75	#endif
76	IMPLICIT NONE
77
78	! .............................START PROLOGUE............................
79
80
81	! All argument names (except len,nd,ntra,nloc,delt and the flags) have a "1" appended.
82	! The "1" is removed for the corresponding compressed variables.
83	! PARAMETERS:
84	! Name Type Usage Description
85	! ---------- ---------- ------- ----------------------------
86
87	! len Integer Input first (i) dimension
88	! nd Integer Input vertical (k) dimension
89	! ndp1 Integer Input nd + 1
90	! ntra Integer Input number of tracors
91	! nloc Integer Input dimension of arrays for compressed fields
92	! k_upper Integer Input upmost level for vertical loops
93	! iflag_con Integer Input version of convect (3/4)
94	! iflag_mix Integer Input version of mixing (0/1/2)
95	! iflag_ice_thermo Integer Input accounting for ice thermodynamics (0/1)
96	! iflag_clos Integer Input version of closure (0/1)
97	! tau_cld_cv Real Input characteristic time of dissipation of mixing fluxes
98	! coefw_cld_cv Real Input coefficient for updraft velocity in convection
99	! ok_conserv_q Logical Input when true corrections for water conservation are swtiched on
100	! delt Real Input time step
101	! comp_threshold Real Input threshold on the fraction of convective points below which
102	! fields are compressed
103	! t1 Real Input temperature (sat draught envt)
104	! q1 Real Input specific hum (sat draught envt)
105	! qs1 Real Input sat specific hum (sat draught envt)
106	! t1_wake Real Input temperature (unsat draught envt)
107	! q1_wake Real Input specific hum(unsat draught envt)
108	! qs1_wake Real Input sat specific hum(unsat draughts envt)
109	! s1_wake Real Input fractionnal area covered by wakes
110	! u1 Real Input u-wind
111	! v1 Real Input v-wind
112	! tra1 Real Input tracors
113	! p1 Real Input full level pressure
114	! ph1 Real Input half level pressure
115	! ALE1 Real Input Available lifting Energy
116	! ALP1 Real Input Available lifting Power
117	! sig1feed1 Real Input sigma coord at lower bound of feeding layer
118	! sig2feed1 Real Input sigma coord at upper bound of feeding layer
119	! wght1 Real Input weight density determining the feeding mixture
120	! iflag1 Integer Output flag for Emanuel conditions
121	! ft1 Real Output temp tend
122	! fq1 Real Output spec hum tend
123	! fu1 Real Output u-wind tend
124	! fv1 Real Output v-wind tend
125	! ftra1 Real Output tracor tend
126	! precip1 Real Output precipitation
127	! kbas1 Integer Output cloud base level
128	! ktop1 Integer Output cloud top level
129	! cbmf1 Real Output cloud base mass flux
130	! sig1 Real In/Out section adiabatic updraft
131	! w01 Real In/Out vertical velocity within adiab updraft
132	! ptop21 Real In/Out top of entraining zone
133	! Ma1 Real Output mass flux adiabatic updraft
134	! mip1 Real Output mass flux shed by the adiabatic updraft
135	! Vprecip1 Real Output vertical profile of total precipitation
136	! Vprecipi1 Real Output vertical profile of ice precipitation
137	! upwd1 Real Output total upward mass flux (adiab+mixed)
138	! dnwd1 Real Output saturated downward mass flux (mixed)
139	! dnwd01 Real Output unsaturated downward mass flux
140	! qcondc1 Real Output in-cld mixing ratio of condensed water
141	! wd1 Real Output downdraft velocity scale for sfc fluxes
142	! cape1 Real Output CAPE
143	! cin1 Real Output CIN
144	! tvp1 Real Output adiab lifted parcell virt temp
145	! ftd1 Real Output precip temp tend
146	! fqt1 Real Output precip spec hum tend
147	! Plim11 Real Output
148	! Plim21 Real Output
149	! asupmax1 Real Output
150	! supmax01 Real Output
151	! asupmaxmin1 Real Output
152
153	! ftd1 Real Output Array of temperature tendency due to precipitations (K/s) of dimension ND,
154	! defined at same grid levels as T, Q, QS and P.
155
156	! fqd1 Real Output Array of specific humidity tendencies due to precipitations ((gm/gm)/s)
157	! of dimension ND, defined at same grid levels as T, Q, QS and P.
158
159	! wdtrainA1 Real Output precipitation detrained from adiabatic draught;
160	! used in tracer transport (cvltr)
161	! wdtrainM1 Real Output precipitation detrained from mixed draughts;
162	! used in tracer transport (cvltr)
163	! da1 Real Output used in tracer transport (cvltr)
164	! phi1 Real Output used in tracer transport (cvltr)
165	! mp1 Real Output used in tracer transport (cvltr)
166	! qtc1 Real Output specific humidity in convection
167	! sigt1 Real Output surface fraction in adiabatic updrafts
168	! phi21 Real Output used in tracer transport (cvltr)
169
170	! d1a1 Real Output used in tracer transport (cvltr)
171	! dam1 Real Output used in tracer transport (cvltr)
172
173	! epmlmMm1 Real Output used in tracer transport (cvltr)
174	! eplaMm1 Real Output used in tracer transport (cvltr)
175
176	! evap1 Real Output
177	! ep1 Real Output
178	! sigij1 Real Output used in tracer transport (cvltr)
179	! elij1 Real Output
180	! wghti1 Real Output final weight of the feeding layers,
181	! used in tracer transport (cvltr)
182
183
184	! S. Bony, Mar 2002:
185	! * Several modules corresponding to different physical processes
186	! * Several versions of convect may be used:
187	! - iflag_con=3: version lmd (previously named convect3)
188	! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
189	! + tard: - iflag_con=5: version lmd with ice (previously named convectg)
190	! S. Bony, Oct 2002:
191	! * Vectorization of convect3 (ie version lmd)
192
193	! ..............................END PROLOGUE.............................
194
195
196
197	! Input
198	INTEGER, INTENT (IN) :: len
199	INTEGER, INTENT (IN) :: nd
200	INTEGER, INTENT (IN) :: ndp1
201	INTEGER, INTENT (IN) :: ntra
202	INTEGER, INTENT(IN) :: nloc ! (nloc=klon) pour l'instant
203	INTEGER, INTENT (IN) :: k_upper
204	INTEGER, INTENT (IN) :: iflag_con
205	INTEGER, INTENT (IN) :: iflag_mix
206	INTEGER, INTENT (IN) :: iflag_ice_thermo
207	INTEGER, INTENT (IN) :: iflag_clos
208	LOGICAL, INTENT (IN) :: ok_conserv_q
209	REAL, INTENT (IN) :: tau_cld_cv
210	REAL, INTENT (IN) :: coefw_cld_cv
211	REAL, INTENT (IN) :: delt
212	REAL, INTENT (IN) :: comp_threshold
213	REAL, DIMENSION (len, nd), INTENT (IN) :: t1
214	REAL, DIMENSION (len, nd), INTENT (IN) :: q1
215	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1
216	REAL, DIMENSION (len, nd), INTENT (IN) :: t1_wake
217	REAL, DIMENSION (len, nd), INTENT (IN) :: q1_wake
218	REAL, DIMENSION (len, nd), INTENT (IN) :: qs1_wake
219	REAL, DIMENSION (len), INTENT (IN) :: s1_wake
220	REAL, DIMENSION (len, nd), INTENT (IN) :: u1
221	REAL, DIMENSION (len, nd), INTENT (IN) :: v1
222	REAL, DIMENSION (len, nd, ntra), INTENT (IN) :: tra1
223	REAL, DIMENSION (len, nd), INTENT (IN) :: p1
224	REAL, DIMENSION (len, ndp1), INTENT (IN) :: ph1
225	REAL, DIMENSION (len), INTENT (IN) :: Ale1
226	REAL, DIMENSION (len), INTENT (IN) :: Alp1
227	REAL, DIMENSION (len, nd), INTENT (IN) :: omega1
228	REAL, INTENT (IN) :: sig1feed1 ! pressure at lower bound of feeding layer
229	REAL, INTENT (IN) :: sig2feed1 ! pressure at upper bound of feeding layer
230	REAL, DIMENSION (nd), INTENT (IN) :: wght1 ! weight density determining the feeding mixture
231	INTEGER, DIMENSION (len), INTENT (IN) :: lalim_conv1
232
233	! Input/Output
234	REAL, DIMENSION (len, nd), INTENT (INOUT) :: sig1
235	REAL, DIMENSION (len, nd), INTENT (INOUT) :: w01
236
237	! Output
238	INTEGER, DIMENSION (len), INTENT (OUT) :: iflag1
239	REAL, DIMENSION (len, nd), INTENT (OUT) :: ft1
240	REAL, DIMENSION (len, nd), INTENT (OUT) :: fq1
241	REAL, DIMENSION (len, nd), INTENT (OUT) :: fu1
242	REAL, DIMENSION (len, nd), INTENT (OUT) :: fv1
243	REAL, DIMENSION (len, nd, ntra), INTENT (OUT) :: ftra1
244	REAL, DIMENSION (len), INTENT (OUT) :: precip1
245	INTEGER, DIMENSION (len), INTENT (OUT) :: kbas1
246	INTEGER, DIMENSION (len), INTENT (OUT) :: ktop1
247	REAL, DIMENSION (len), INTENT (OUT) :: cbmf1
248	REAL, DIMENSION (len), INTENT (OUT) :: plcl1
249	REAL, DIMENSION (len), INTENT (OUT) :: plfc1
250	REAL, DIMENSION (len), INTENT (OUT) :: wbeff1
251	REAL, DIMENSION (len), INTENT (OUT) :: ptop21
252	REAL, DIMENSION (len), INTENT (OUT) :: sigd1
253	REAL, DIMENSION (len, nd), INTENT (OUT) :: ma1
254	REAL, DIMENSION (len, nd), INTENT (OUT) :: mip1
255	! real Vprecip1(len,nd)
256	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecip1
257	REAL, DIMENSION (len, ndp1), INTENT (OUT) :: vprecipi1
258	REAL, DIMENSION (len, nd), INTENT (OUT) :: upwd1
259	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd1
260	REAL, DIMENSION (len, nd), INTENT (OUT) :: dnwd01
261	REAL, DIMENSION (len, nd), INTENT (OUT) :: qcondc1 ! cld
262	REAL, DIMENSION (len), INTENT (OUT) :: wd1 ! gust
263	REAL, DIMENSION (len), INTENT (OUT) :: cape1
264	REAL, DIMENSION (len), INTENT (OUT) :: cin1
265	REAL, DIMENSION (len, nd), INTENT (OUT) :: tvp1
266
267	!AC!
268	!! real da1(len,nd),phi1(len,nd,nd)
269	!! real da(len,nd),phi(len,nd,nd)
270	!AC!
271	REAL, DIMENSION (len, nd), INTENT (OUT) :: ftd1
272	REAL, DIMENSION (len, nd), INTENT (OUT) :: fqd1
273	REAL, DIMENSION (len), INTENT (OUT) :: Plim11
274	REAL, DIMENSION (len), INTENT (OUT) :: Plim21
275	REAL, DIMENSION (len, nd), INTENT (OUT) :: asupmax1
276	REAL, DIMENSION (len), INTENT (OUT) :: supmax01
277	REAL, DIMENSION (len), INTENT (OUT) :: asupmaxmin1
278	REAL, DIMENSION (len, nd), INTENT (OUT) :: qtc1 ! cld
279	REAL, DIMENSION (len, nd), INTENT (OUT) :: sigt1 ! cld
280
281	! RomP >>>
282	REAL, DIMENSION (len, nd), INTENT (OUT) :: wdtrainA1, wdtrainM1
283	REAL, DIMENSION (len, nd), INTENT (OUT) :: da1, mp1
284	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi1
285	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: epmlmMm1
286	REAL, DIMENSION (len, nd), INTENT (OUT) :: eplaMm1
287	REAL, DIMENSION (len, nd), INTENT (OUT) :: evap1, ep1
288	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: sigij1, elij1
289	!JYG,RL
290	REAL, DIMENSION (len, nd), INTENT (OUT) :: wghti1 ! final weight of the feeding layers
291	!JYG,RL
292	REAL, DIMENSION (len, nd, nd), INTENT (OUT) :: phi21
293	REAL, DIMENSION (len, nd), INTENT (OUT) :: d1a1, dam1
294	! RomP <<<
295	REAL, DIMENSION (len ), INTENT (OUT) :: epmax_diag1
296	#ifdef ISO
297	real, DIMENSION(ntraciso,len,nd), INTENT (IN) :: xt1
298	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxt1
299	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xt1_wake
300	real, DIMENSION(ntraciso,len), INTENT (OUT) :: xtprecip1
301	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: fxtd1
302	real, DIMENSION(ntraciso,len,ndp1), INTENT (OUT) :: xtvprecip1
303	real, DIMENSION(ntraciso,len,ndp1), INTENT (OUT) :: xtvprecipi1
304	#ifdef DIAGISO
305	real, DIMENSION(len,nd), INTENT (OUT) :: water1
306	real, DIMENSION(niso,len,nd), INTENT (OUT) :: xtwater1
307	real, DIMENSION(len,nd), INTENT (OUT) :: qp1
308	real, DIMENSION(ntraciso,len,nd), INTENT (OUT) :: xtp1
309	real, DIMENSION(len,nd), INTENT (OUT) :: wdtrain1
310	real, DIMENSION(len,nd), INTENT (OUT) :: taux_cond_conv1
311	real, DIMENSION(len,nd), INTENT (OUT) :: fq_detrainement1
312	real, DIMENSION(len,nd), INTENT (OUT) :: f_detrainement1
313	real, DIMENSION(len,nd), INTENT (OUT) :: q_detrainement1
314	real, DIMENSION(len,nd), INTENT (OUT) :: fq_ddft1
315	real, DIMENSION(len,nd), INTENT (OUT) :: fq_fluxmasse1
316	real, DIMENSION(len,nd), INTENT (OUT) :: Amp_diag1
317	real, DIMENSION(len,nd), INTENT (OUT) :: tg_save1
318	real, DIMENSION(len,nd), INTENT (OUT) :: fq_evapprecip1
319	real, DIMENSION(len,nd), INTENT (OUT) :: Mi1
320	real, DIMENSION(niso,len,nd), INTENT (OUT) :: xtwdtrain1
321	real, DIMENSION(niso,len,nd), INTENT (OUT) :: xtevap1
322	real, DIMENSION(niso,len,nd), INTENT (OUT) :: xt_detrainement1
323	real, DIMENSION(niso,len,nd), INTENT (OUT) :: fxt_detrainement1
324	real, DIMENSION(niso,len,nd), INTENT (OUT) :: fxt_ddft1
325	real, DIMENSION(niso,len,nd), INTENT (OUT) :: fxt_fluxmasse1
326	real, DIMENSION(niso,len,nd), INTENT (OUT) :: fxt_evapprecip1
327	! real mentbas1(len,nd)
328	! real qentbas1(len,nd), xtentbas1(niso,len,nd)
329	#endif
330	#endif
331
332
333	! -------------------------------------------------------------------
334	! Prolog by Kerry Emanuel.
335	! -------------------------------------------------------------------
336	! --- ARGUMENTS
337	! -------------------------------------------------------------------
338	! --- On input:
339
340	! t: Array of absolute temperature (K) of dimension ND, with first
341	! index corresponding to lowest model level. Note that this array
342	! will be altered by the subroutine if dry convective adjustment
343	! occurs and if IPBL is not equal to 0.
344
345	! q: Array of specific humidity (gm/gm) of dimension ND, with first
346	! index corresponding to lowest model level. Must be defined
347	! at same grid levels as T. Note that this array will be altered
348	! if dry convective adjustment occurs and if IPBL is not equal to 0.
349
350	! qs: Array of saturation specific humidity of dimension ND, with first
351	! index corresponding to lowest model level. Must be defined
352	! at same grid levels as T. Note that this array will be altered
353	! if dry convective adjustment occurs and if IPBL is not equal to 0.
354
355	! t_wake: Array of absolute temperature (K), seen by unsaturated draughts,
356	! of dimension ND, with first index corresponding to lowest model level.
357
358	! q_wake: Array of specific humidity (gm/gm), seen by unsaturated draughts,
359	! of dimension ND, with first index corresponding to lowest model level.
360	! Must be defined at same grid levels as T.
361
362	! qs_wake: Array of saturation specific humidity, seen by unsaturated draughts,
363	! of dimension ND, with first index corresponding to lowest model level.
364	! Must be defined at same grid levels as T.
365
366	! s_wake: Array of fractionnal area occupied by the wakes.
367
368	! u: Array of zonal wind velocity (m/s) of dimension ND, witth first
369	! index corresponding with the lowest model level. Defined at
370	! same levels as T. Note that this array will be altered if
371	! dry convective adjustment occurs and if IPBL is not equal to 0.
372
373	! v: Same as u but for meridional velocity.
374
375	! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
376	! where NTRA is the number of different tracers. If no
377	! convective tracer transport is needed, define a dummy
378	! input array of dimension (ND,1). Tracers are defined at
379	! same vertical levels as T. Note that this array will be altered
380	! if dry convective adjustment occurs and if IPBL is not equal to 0.
381
382	! p: Array of pressure (mb) of dimension ND, with first
383	! index corresponding to lowest model level. Must be defined
384	! at same grid levels as T.
385
386	! ph: Array of pressure (mb) of dimension ND+1, with first index
387	! corresponding to lowest level. These pressures are defined at
388	! levels intermediate between those of P, T, Q and QS. The first
389	! value of PH should be greater than (i.e. at a lower level than)
390	! the first value of the array P.
391
392	! ALE: Available lifting Energy
393
394	! ALP: Available lifting Power
395
396	! nl: The maximum number of levels to which convection can penetrate, plus 1.
397	! NL MUST be less than or equal to ND-1.
398
399	! delt: The model time step (sec) between calls to CONVECT
400
401	! ----------------------------------------------------------------------------
402	! --- On Output:
403
404	! iflag: An output integer whose value denotes the following:
405	! VALUE INTERPRETATION
406	! ----- --------------
407	! 0 Moist convection occurs.
408	! 1 Moist convection occurs, but a CFL condition
409	! on the subsidence warming is violated. This
410	! does not cause the scheme to terminate.
411	! 2 Moist convection, but no precip because ep(inb) lt 0.0001
412	! 3 No moist convection because new cbmf is 0 and old cbmf is 0.
413	! 4 No moist convection; atmosphere is not
414	! unstable
415	! 6 No moist convection because ihmin le minorig.
416	! 7 No moist convection because unreasonable
417	! parcel level temperature or specific humidity.
418	! 8 No moist convection: lifted condensation
419	! level is above the 200 mb level.
420	! 9 No moist convection: cloud base is higher
421	! then the level NL-1.
422
423	! ft: Array of temperature tendency (K/s) of dimension ND, defined at same
424	! grid levels as T, Q, QS and P.
425
426	! fq: Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
427	! defined at same grid levels as T, Q, QS and P.
428
429	! fu: Array of forcing of zonal velocity (m/s^2) of dimension ND,
430	! defined at same grid levels as T.
431
432	! fv: Same as FU, but for forcing of meridional velocity.
433
434	! ftra: Array of forcing of tracer content, in tracer mixing ratio per
435	! second, defined at same levels as T. Dimensioned (ND,NTRA).
436
437	! precip: Scalar convective precipitation rate (mm/day).
438
439	! wd: A convective downdraft velocity scale. For use in surface
440	! flux parameterizations. See convect.ps file for details.
441
442	! tprime: A convective downdraft temperature perturbation scale (K).
443	! For use in surface flux parameterizations. See convect.ps
444	! file for details.
445
446	! qprime: A convective downdraft specific humidity
447	! perturbation scale (gm/gm).
448	! For use in surface flux parameterizations. See convect.ps
449	! file for details.
450
451	! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
452	! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
453	! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
454	! by the calling program between calls to CONVECT.
455
456	! det: Array of detrainment mass flux of dimension ND.
457	! -------------------------------------------------------------------
458
459	! Local (non compressed) arrays
460
461
462	INTEGER i, k, n, il, j
463	INTEGER nword1, nword2, nword3, nword4
464	#ifdef ISO
465	integer nword1iso, nword2iso
466	integer nword1traciso, nword2traciso
467	#endif
468	INTEGER icbmax
469	INTEGER nk1(klon)
470	INTEGER icb1(klon)
471	INTEGER icbs1(klon)
472
473	LOGICAL ok_inhib ! True => possible inhibition of convection by dryness
474	LOGICAL, SAVE :: debut = .TRUE.
475	!$OMP THREADPRIVATE(debut)
476
477	REAL coef_convective(len) ! = 1 for convective points, = 0 otherwise
478	REAL tnk1(klon)
479	REAL thnk1(klon)
480	REAL qnk1(klon)
481	REAL gznk1(klon)
482	REAL pnk1(klon)
483	REAL qsnk1(klon)
484	REAL unk1(klon)
485	REAL vnk1(klon)
486	REAL cpnk1(klon)
487	REAL hnk1(klon)
488	REAL pbase1(klon)
489	REAL buoybase1(klon)
490
491	REAL lf1(klon, klev), lf1_wake(klon, klev)
492	REAL lv1(klon, klev), lv1_wake(klon, klev)
493	REAL cpn1(klon, klev), cpn1_wake(klon, klev)
494	REAL tv1(klon, klev), tv1_wake(klon, klev)
495	REAL gz1(klon, klev), gz1_wake(klon, klev)
496	REAL hm1(klon, klev), hm1_wake(klon, klev)
497	REAL h1(klon, klev), h1_wake(klon, klev)
498	REAL tp1(klon, klev)
499	REAL clw1(klon, klev)
500	REAL th1(klon, klev), th1_wake(klon, klev)
501
502	REAL bid(klon, klev) ! dummy array
503
504	#ifdef ISO
505	integer ixt
506	real xtnk1(ntraciso,klon)
507	real xtclw1(ntraciso,klon,klev)
508	#endif
509
510	INTEGER ncum
511
512	INTEGER j1feed(klon)
513	INTEGER j2feed(klon)
514	REAL p1feed1(len) ! pressure at lower bound of feeding layer
515	REAL p2feed1(len) ! pressure at upper bound of feeding layer
516	!JYG,RL
517	!! real wghti1(len,nd) ! weights of the feeding layers
518	!JYG,RL
519
520	! (local) compressed fields:
521
522
523	INTEGER idcum(nloc)
524	!jyg<
525	LOGICAL compress ! True if compression occurs
526	!>jyg
527	INTEGER iflag(nloc), nk(nloc), icb(nloc)
528	INTEGER nent(nloc, klev)
529	INTEGER icbs(nloc)
530	INTEGER inb(nloc), inbis(nloc)
531
532	REAL cbmf(nloc), plcl(nloc), plfc(nloc), wbeff(nloc)
533	REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
534	REAL t_wake(nloc, klev), q_wake(nloc, klev), qs_wake(nloc, klev)
535	REAL s_wake(nloc)
536	REAL u(nloc, klev), v(nloc, klev)
537	REAL gz(nloc, klev), h(nloc, klev), hm(nloc, klev)
538	REAL h_wake(nloc, klev), hm_wake(nloc, klev)
539	REAL lv(nloc, klev), lf(nloc, klev), cpn(nloc, klev)
540	REAL lv_wake(nloc, klev), lf_wake(nloc, klev), cpn_wake(nloc, klev)
541	REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
542	REAL tv_wake(nloc, klev)
543	REAL clw(nloc, klev)
544	REAL dph(nloc, klev)
545	REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
546	REAL th_wake(nloc, klev)
547	REAL tvp(nloc, klev)
548	REAL sig(nloc, klev), w0(nloc, klev), ptop2(nloc)
549	REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
550	REAL buoy(nloc, klev)
551	REAL cape(nloc)
552	REAL cin(nloc)
553	REAL m(nloc, klev)
554	REAL ment(nloc, klev, klev), sigij(nloc, klev, klev)
555	REAL qent(nloc, klev, klev)
556	REAL hent(nloc, klev, klev)
557	REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
558	REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
559	REAL elij(nloc, klev, klev)
560	REAL supmax(nloc, klev)
561	REAL Ale(nloc), Alp(nloc), coef_clos(nloc)
562	REAL omega(nloc,klev)
563	REAL sigd(nloc)
564	! real mp(nloc,klev), qp(nloc,klev), up(nloc,klev), vp(nloc,klev)
565	! real wt(nloc,klev), water(nloc,klev), evap(nloc,klev), ice(nloc,klev)
566	! real b(nloc,klev), sigd(nloc)
567	! save mp,qp,up,vp,wt,water,evap,b
568	REAL, SAVE, ALLOCATABLE :: mp(:, :), qp(:, :), up(:, :), vp(:, :)
569	REAL, SAVE, ALLOCATABLE :: wt(:, :), water(:, :), evap(:, :)
570	REAL, SAVE, ALLOCATABLE :: ice(:, :), fondue(:, :), b(:, :)
571	REAL, SAVE, ALLOCATABLE :: frac(:, :), faci(:, :)
572	!$OMP THREADPRIVATE(mp,qp,up,vp,wt,water,evap,ice,fondue,b,frac,faci)
573	REAL ft(nloc, klev), fq(nloc, klev)
574	REAL ftd(nloc, klev), fqd(nloc, klev)
575	REAL fu(nloc, klev), fv(nloc, klev)
576	REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
577	REAL ma(nloc, klev), mip(nloc, klev)
578	!! REAL tls(nloc, klev), tps(nloc, klev) ! unused . jyg
579	REAL qprime(nloc), tprime(nloc)
580	REAL precip(nloc)
581	! real Vprecip(nloc,klev)
582	REAL vprecip(nloc, klev+1)
583	REAL vprecipi(nloc, klev+1)
584	REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
585	REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
586	REAL qcondc(nloc, klev) ! cld
587	REAL wd(nloc) ! gust
588	REAL Plim1(nloc), plim2(nloc)
589	REAL asupmax(nloc, klev)
590	REAL supmax0(nloc)
591	REAL asupmaxmin(nloc)
592
593	REAL tnk(nloc), qnk(nloc), gznk(nloc)
594	REAL wghti(nloc, nd)
595	REAL hnk(nloc), unk(nloc), vnk(nloc)
596
597	REAL qtc(nloc, klev) ! cld
598	REAL sigt(nloc, klev) ! cld
599
600	! RomP >>>
601	REAL wdtrainA(nloc, klev), wdtrainM(nloc, klev)
602	REAL da(len, nd), phi(len, nd, nd)
603	REAL epmlmMm(nloc, klev, klev), eplaMm(nloc, klev)
604	REAL phi2(len, nd, nd)
605	REAL d1a(len, nd), dam(len, nd)
606	! RomP <<<
607	REAL epmax_diag(nloc) ! epmax_cape
608
609	LOGICAL, SAVE :: first = .TRUE.
610	!$OMP THREADPRIVATE(first)
611	CHARACTER (LEN=20) :: modname = 'cva_driver'
612	CHARACTER (LEN=80) :: abort_message
613
614	INTEGER,SAVE :: igout=1
615	!$OMP THREADPRIVATE(igout)
616
617	#ifdef ISO
618	real xt(ntraciso,nloc,klev)
619	real xt_wake(ntraciso,nloc,klev)
620	real xtclw(ntraciso,nloc,klev)
621	real xtp(ntraciso,nloc,klev)
622	real xtent(ntraciso,nloc,klev,klev)
623	real xtelij(ntraciso,nloc,klev,klev)
624	! real xtep(ntraciso,nloc,klev) ! le 7 mai: on supprime xtep
625	real xtwater(ntraciso,nloc,klev)
626	real xtice(ntraciso,nloc,klev)
627	real xtevap(ntraciso,nloc,klev)
628	real fxt(ntraciso,nloc,klev)
629	real fxtd(ntraciso,nloc,klev)
630	real xtprecip(ntraciso,nloc)
631	real tg_save(nloc,klev) ! températures de condensation
632	real xtnk(ntraciso,nloc)
633	real xtVprecip(ntraciso,nloc,klev+1)
634	real xtVprecipi(ntraciso,nloc,klev+1)
635	#ifdef DIAGISO
636	real wdtrain(nloc,klev)
637	real xtwdtrain(niso,nloc,klev)
638	real taux_cond_conv(nloc,klev)
639	real fxt_detrainement(niso,nloc,klev)
640	real fxt_fluxmasse(niso,nloc,klev)
641	real fxt_evapprecip(niso,nloc,klev)
642	real fxt_ddft(niso,nloc,klev)
643	real fq_detrainement(nloc,klev)
644	real f_detrainement(nloc,klev)
645	real q_detrainement(nloc,klev)
646	real xt_detrainement(niso,nloc,klev)
647	real fq_fluxmasse(nloc,klev)
648	real Amp_diag(nloc,klev)
649	real fq_evapprecip(nloc,klev)
650	real fq_ddft(nloc,klev)
651	! real Mi(nloc,klev) déjà sorti dans cv3_yield: m
652	! real mentbas(nloc,klev): déjà sortie: ment
653	! real qentbas(nloc,klev): déjà sortie: qent
654	#endif
655	#ifdef ISOTRAC
656	integer iiso,ixt_ddft,ixt_poubelle,ixt_revap
657	integer izone
658	#endif
659	#ifdef ISOVERIF
660	! integer iso_verif_positif_nostop
661	! integer iso_verif_noNaN_nostop
662	! real deltaD
663	integer indice_uncompress(len)
664	#endif
665	#endif
666
667
668	! print *, 't1, t1_wake ',(k,t1(1,k),t1_wake(1,k),k=1,klev)
669	! print *, 'q1, q1_wake ',(k,q1(1,k),q1_wake(1,k),k=1,klev)
670
671	! -------------------------------------------------------------------
672	! --- SET CONSTANTS AND PARAMETERS
673	! -------------------------------------------------------------------
674
675	IF (first) THEN
676	ALLOCATE (mp(nloc,klev), qp(nloc,klev), up(nloc,klev))
677	ALLOCATE (vp(nloc,klev), wt(nloc,klev), water(nloc,klev))
678	ALLOCATE (ice(nloc,klev), fondue(nloc,klev))
679	ALLOCATE (evap(nloc,klev), b(nloc,klev))
680	ALLOCATE (frac(nloc,klev), faci(nloc,klev))
681	first = .FALSE.
682	END IF
683	! -- set simulation flags:
684	! (common cvflag)
685
686	CALL cv_flag(iflag_ice_thermo)
687
688	! -- set thermodynamical constants:
689	! (common cvthermo)
690
691	CALL cv_thermo(iflag_con)
692
693	! -- set convect parameters
694
695	! includes microphysical parameters and parameters that
696	! control the rate of approach to quasi-equilibrium)
697	! (common cvparam)
698
699	IF (iflag_con==3) THEN
700	CALL cv3_param(nd, k_upper, delt)
701	#ifdef ISO
702	CALL abort_physic('cva_driver 554', 'isos pas encore bien codes ici', 1)
703	#endif
704
705	END IF
706
707	IF (iflag_con==4) THEN
708	CALL cv_param(nd)
709	#ifdef ISO
710	CALL abort_physic('cva_driver 555', 'isos pas prevus ici', 1)
711	#endif
712	END IF
713
714	! ---------------------------------------------------------------------
715	! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
716	! ---------------------------------------------------------------------
717	nword1 = len
718	nword2 = len*nd
719	nword3 = lenndntra
720	nword4 = lenndnd
721	#ifdef ISO
722	nword1traciso=len*ntraciso
723	nword1iso=len*niso
724	nword2traciso=lennd ntraciso
725	nword2iso=lennd niso
726	#endif
727
728	iflag1(:) = 0
729	ktop1(:) = 0
730	kbas1(:) = 0
731	ft1(:, :) = 0.0
732	fq1(:, :) = 0.0
733	fu1(:, :) = 0.0
734	fv1(:, :) = 0.0
735	ftra1(:, :, :) = 0.
736	precip1(:) = 0.
737	cbmf1(:) = 0.
738	plcl1(:) = 0.
739	plfc1(:) = 0.
740	wbeff1(:) = 0.
741	ptop21(:) = 0.
742	sigd1(:) = 0.
743	ma1(:, :) = 0.
744	mip1(:, :) = 0.
745	vprecip1(:, :) = 0.
746	vprecipi1(:, :) = 0.
747	upwd1(:, :) = 0.
748	dnwd1(:, :) = 0.
749	dnwd01(:, :) = 0.
750	qcondc1(:, :) = 0.
751	wd1(:) = 0.
752	cape1(:) = 0.
753	cin1(:) = 0.
754	tvp1(:, :) = 0.
755	ftd1(:, :) = 0.
756	fqd1(:, :) = 0.
757	Plim11(:) = 0.
758	Plim21(:) = 0.
759	asupmax1(:, :) = 0.
760	supmax01(:) = 0.
761	asupmaxmin1(:) = 0.
762
763	#ifdef ISO
764	fxt1(:, :,:) = 0.0
765	xtprecip1(:,:) = 0.
766	xtvprecip1(:, :,:) = 0.
767	xtvprecipi1(:, :,:) = 0.
768	fxtd1(:, :,:) = 0.
769	#endif
770
771	DO il = 1, len
772	cin1(il) = -100000.
773	cape1(il) = -1.
774	END DO
775
776	!! IF (iflag_con==3) THEN
777	!! DO il = 1, len
778	!! sig1(il, nd) = sig1(il, nd) + 1.
779	!! sig1(il, nd) = amin1(sig1(il,nd), 12.1)
780	!! END DO
781	!! END IF
782
783	IF (iflag_con==3) THEN
784	CALL cv3_incrcount(len,nd,delt,sig1)
785	END IF ! (iflag_con==3)
786
787	! RomP >>>
788	sigt1(:, :) = 0.
789	qtc1(:, :) = 0.
790	wdtrainA1(:, :) = 0.
791	wdtrainM1(:, :) = 0.
792	da1(:, :) = 0.
793	phi1(:, :, :) = 0.
794	epmlmMm1(:, :, :) = 0.
795	eplaMm1(:, :) = 0.
796	mp1(:, :) = 0.
797	evap1(:, :) = 0.
798	ep1(:, :) = 0.
799	sigij1(:, :, :) = 0.
800	elij1(:, :, :) = 0.
801	wghti1(:,:) = 0.
802	phi21(:, :, :) = 0.
803	d1a1(:, :) = 0.
804	dam1(:, :) = 0.
805	! RomP <<<
806	! ---------------------------------------------------------------------
807	! --- INITIALIZE LOCAL ARRAYS AND PARAMETERS
808	! ---------------------------------------------------------------------
809
810	DO il = 1, nloc
811	coef_clos(il) = 1.
812	END DO
813
814	! --------------------------------------------------------------------
815	! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
816	! --------------------------------------------------------------------
817
818	IF (iflag_con==3) THEN
819
820	IF (debut) THEN
821	PRINT *, 'Emanuel version 3 nouvelle'
822	END IF
823	! print*,'t1, q1 ',t1,q1
824	CALL cv3_prelim(len, nd, ndp1, t1, q1, p1, ph1, & ! nd->na
825	lv1, lf1, cpn1, tv1, gz1, h1, hm1, th1)
826
827
828	CALL cv3_prelim(len, nd, ndp1, t1_wake, q1_wake, p1, ph1, & ! nd->na
829	lv1_wake, lf1_wake, cpn1_wake, tv1_wake, gz1_wake, &
830	h1_wake, bid, th1_wake)
831
832	END IF
833
834	IF (iflag_con==4) THEN
835	PRINT *, 'Emanuel version 4 '
836	CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, &
837	lv1, cpn1, tv1, gz1, h1, hm1)
838	END IF
839
840	! --------------------------------------------------------------------
841	! --- CONVECTIVE FEED
842	! --------------------------------------------------------------------
843
844	! compute feeding layer potential temperature and mixing ratio :
845
846	! get bounds of feeding layer
847
848	! test niveaux couche alimentation KE
849	IF (sig1feed1==sig2feed1) THEN
850	WRITE (lunout, *) 'impossible de choisir sig1feed=sig2feed'
851	WRITE (lunout, *) 'changer la valeur de sig2feed dans physiq.def'
852	abort_message = ''
853	CALL abort_physic(modname, abort_message, 1)
854	END IF
855
856	DO i = 1, len
857	p1feed1(i) = sig1feed1*ph1(i, 1)
858	p2feed1(i) = sig2feed1*ph1(i, 1)
859	!test maf
860	! p1feed1(i)=ph1(i,1)
861	! p2feed1(i)=ph1(i,2)
862	! p2feed1(i)=ph1(i,3)
863	!testCR: on prend la couche alim des thermiques
864	! p2feed1(i)=ph1(i,lalim_conv1(i)+1)
865	! print*,'lentr=',lentr(i),ph1(i,lentr(i)+1),ph1(i,2)
866	END DO
867
868	IF (iflag_con==3) THEN
869	END IF
870	DO i = 1, len
871	! print*,'avant cv3_feed Plim',p1feed1(i),p2feed1(i)
872	END DO
873	IF (iflag_con==3) THEN
874
875	! print*, 'IFLAG1 avant cv3_feed'
876	! print*,'len,nd',len,nd
877	! write(*,'(64i1)') iflag1(2:klon-1)
878
879	CALL cv3_feed(len, nd, ok_conserv_q, & ! nd->na
880	t1, q1, u1, v1, p1, ph1, hm1, gz1, &
881	p1feed1, p2feed1, wght1, &
882	wghti1, tnk1, thnk1, qnk1, qsnk1, unk1, vnk1, &
883	cpnk1, hnk1, nk1, icb1, icbmax, iflag1, gznk1, plcl1 &
884	#ifdef ISO
885	& ,xt1,xtnk1 &
886	#endif
887	& )
888	END IF
889
890	! print*, 'IFLAG1 apres cv3_feed'
891	! print*,'len,nd',len,nd
892	! write(*,'(64i1)') iflag1(2:klon-1)
893
894	IF (iflag_con==4) THEN
895	CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, &
896	nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1)
897	END IF
898
899	! print *, 'cv3_feed-> iflag1, plcl1 ',iflag1(1),plcl1(1)
900
901	! --------------------------------------------------------------------
902	! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
903	! (up through ICB for convect4, up through ICB+1 for convect3)
904	! Calculates the lifted parcel virtual temperature at nk, the
905	! actual temperature, and the adiabatic liquid water content.
906	! --------------------------------------------------------------------
907
908	IF (iflag_con==3) THEN
909
910	#ifdef ISO
911	!write(,) 'ENTREE DANS CV3_UNDILUTE1'
912	#ifdef ISOVERIF
913	write(,) 'cva_driver 593: avant cv3_undilute1'
914	if (iso_HDO.gt.0) then
915	do k=1,klev
916	do i=1,klon
917	if (q1(i,k).gt.ridicule) then
918	call iso_verif_aberrant(xt1(iso_hdo,i,k)/q1(i,k), &
919	& 'cva_driver 502')
920	endif ! if (q1(i,k).gt.ridicule) then
921	enddo !do i=1,klon
922	enddo !do k=1,klev
923	endif !if (iso_HDO.gt.0) then
924	if (iso_eau.gt.0) then
925	do i=1,len
926	do k=1,klev
927	call iso_verif_egalite(xt1(iso_eau,i,k),q1(i,k), &
928	& 'cva_driver 764')
929	enddo !do k=1,klev
930	call iso_verif_egalite(xtnk1(iso_eau,i),qnk1(i), &
931	& 'cva_driver 777')
932	do ixt=1,ntraciso
933	call iso_verif_noNaN(xtnk1(ixt,i),'cva_driver 784')
934	enddo ! do ixt=1,ntraciso
935	enddo !do i=1,len
936	endif !if (iso_eau.gt.0) then
937	#ifdef ISOTRAC
938	do k=1,klev
939	do i=1,klon
940	call iso_verif_traceur(xt1(1,i,k),'cva_driver 601')
941	enddo !do i=1,klon
942	enddo !do k=1,klev
943	#endif
944	#endif
945	#endif
946
947	CALL cv3_undilute1(len, nd, t1, qs1, gz1, plcl1, p1, icb1, tnk1, qnk1, & ! nd->na
948	gznk1, tp1, tvp1, clw1, icbs1 &
949	#ifdef ISO
950	& ,xtnk1,xtclw1,tg_save &
951	#endif
952	& )
953
954	#ifdef ISO
955	#ifdef ISOVERIF
956	write(,) 'cva_driver 621: après cv3_undilute1'
957	do k = 1, klev
958	do i = 1, klon
959	if (iso_eau.gt.0) then
960	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
961	& 'cva_driver 798',errmax,errmaxrel)
962	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
963	& 'cva_driver 800',errmax,errmaxrel)
964	endif !if (iso_eau.gt.0) then
965	do ixt=1,ntraciso
966	call iso_verif_noNaN(xt1(ixt,i,k),'cva_driver 815')
967	enddo ! do ixt=1,ntraciso
968	#ifdef ISOTRAC
969	call iso_verif_traceur(xt1(1,i,k),'cva_driver 623')
970	#endif
971	enddo !do i = 1, klon
972	enddo !do k = 1, klev
973	do i = 1, klon
974	do ixt=1,ntraciso
975	call iso_verif_noNaN(xtnk1(ixt,i),'cva_driver 824')
976	enddo ! do ixt=1,ntraciso
977	enddo !do i = 1, klon
978	#endif
979	!write(,) 'SORTIE DE CV3_UNDILUTE1'
980	#endif
981
982	END IF
983
984
985	IF (iflag_con==4) THEN
986	CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, &
987	tp1, tvp1, clw1)
988	END IF
989
990	! -------------------------------------------------------------------
991	! --- TRIGGERING
992	! -------------------------------------------------------------------
993
994	! print *,' avant triggering, iflag_con ',iflag_con
995
996	IF (iflag_con==3) THEN
997
998	CALL cv3_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1, thnk1, & ! nd->na
999	pbase1, buoybase1, iflag1, sig1, w01)
1000
1001
1002	! print*, 'IFLAG1 apres cv3_triger'
1003	! print*,'len,nd',len,nd
1004	! write(*,'(64i1)') iflag1(2:klon-1)
1005
1006	! call dump2d(iim,jjm-1,sig1(2)
1007	END IF
1008
1009	IF (iflag_con==4) THEN
1010	CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
1011	END IF
1012
1013
1014	! =====================================================================
1015	! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
1016	! =====================================================================
1017
1018	! Determine the number "ncum" of convective gridpoints, the list "idcum" of convective
1019	! gridpoints and the weights "coef_convective" (= 1. for convective gridpoints and = 0.
1020	! elsewhere).
1021	ncum = 0
1022	coef_convective(:) = 0.
1023	DO i = 1, len
1024	IF (iflag1(i)==0) THEN
1025	coef_convective(i) = 1.
1026	ncum = ncum + 1
1027	idcum(ncum) = i
1028	END IF
1029	END DO
1030
1031	! print*,'klon, ncum = ',len,ncum
1032
1033	IF (ncum>0) THEN
1034
1035	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1036	! --- COMPRESS THE FIELDS
1037	! (-> vectorization over convective gridpoints)
1038	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1039
1040	IF (iflag_con==3) THEN
1041	! print*,'ncum tv1 ',ncum,tv1
1042	! print*,'tvp1 ',tvp1
1043	!jyg<
1044	! If the fraction of convective points is larger than comp_threshold, then compression
1045	! is assumed useless.
1046	!
1047	compress = ncum .lt. len*comp_threshold
1048	!
1049	IF (.not. compress) THEN
1050	DO i = 1,len
1051	idcum(i) = i
1052	ENDDO
1053	ENDIF
1054	!
1055	#ifdef ISO
1056	#ifdef ISOVERIF
1057	do k = 1, klev
1058	do i = 1, nloc
1059	if (iso_eau.gt.0) then
1060	call iso_verif_egalite_choix(xtclw1(iso_eau,i,k),clw1(i,k), &
1061	& 'cva_driver 541',errmax,errmaxrel)
1062	call iso_verif_egalite_choix(xt1(iso_eau,i,k),q1(i,k), &
1063	& 'cva_driver 541',errmax,errmaxrel)
1064	endif ! if (iso_eau.gt.0) then
1065	#ifdef ISOTRAC
1066	call iso_verif_traceur(xt1(1,i,k),'cva_driver 689')
1067	#endif
1068	enddo
1069	enddo
1070	#endif
1071	#endif
1072	!>jyg
1073	CALL cv3a_compress(len, nloc, ncum, nd, ntra, compress, &
1074	iflag1, nk1, icb1, icbs1, &
1075	plcl1, tnk1, qnk1, gznk1, hnk1, unk1, vnk1, &
1076	wghti1, pbase1, buoybase1, &
1077	t1, q1, qs1, t1_wake, q1_wake, qs1_wake, s1_wake, &
1078	u1, v1, gz1, th1, th1_wake, &
1079	tra1, &
1080	h1, lv1, lf1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
1081	h1_wake, lv1_wake, lf1_wake, cpn1_wake, tv1_wake, &
1082	sig1, w01, ptop21, &
1083	Ale1, Alp1, omega1, &
1084	iflag, nk, icb, icbs, &
1085	plcl, tnk, qnk, gznk, hnk, unk, vnk, &
1086	wghti, pbase, buoybase, &
1087	t, q, qs, t_wake, q_wake, qs_wake, s_wake, &
1088	u, v, gz, th, th_wake, &
1089	tra, &
1090	h, lv, lf, cpn, p, ph, tv, tp, tvp, clw, &
1091	h_wake, lv_wake, lf_wake, cpn_wake, tv_wake, &
1092	sig, w0, ptop2, &
1093	Ale, Alp, omega &
1094	#ifdef ISO
1095	& ,xtnk1,xt1,xt1_wake,xtclw1 &
1096	& ,xtnk,xt,xt_wake,xtclw &
1097	#endif
1098	& )
1099
1100	! print*,'tv ',tv
1101	! print*,'tvp ',tvp
1102
1103	#ifdef ISO
1104	#ifdef ISOVERIF
1105	write(,) 'cva_driver 720: après cv3_compress'
1106	do k = 1, klev
1107	do i = 1, ncum
1108	if (iso_eau.gt.0) then
1109	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
1110	& 'cva_driver 598',errmax,errmaxrel)
1111	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1112	& 'cva_driver 600',errmax,errmaxrel)
1113	endif ! if (iso_eau.gt.0) then
1114	if (iso_HDO.gt.0) then
1115	call iso_verif_aberrant_choix( &
1116	& xt(iso_HDO,i,k),q(i,k), &
1117	& ridicule,deltalim,'cva_driver 735, apres compress')
1118	endif !if (iso_HDO.gt.0) then
1119	#ifdef ISOTRAC
1120	call iso_verif_traceur(xt(1,i,k),'cva_driver 726')
1121	#endif
1122	enddo
1123	enddo
1124	#ifdef VERIFNEGATIF
1125	do i = 1, ncum
1126	do k = 1, klev
1127	call iso_verif_positif(q(i,k),'cva_driver 966a')
1128	enddo !do k = 1, klev
1129	call iso_verif_positif(qnk(i),'cva_driver 966b')
1130	enddo !do i = 1, ncum
1131	#endif
1132	#endif
1133	#endif
1134
1135	END IF
1136
1137	IF (iflag_con==4) THEN
1138	CALL cv_compress(len, nloc, ncum, nd, &
1139	iflag1, nk1, icb1, &
1140	cbmf1, plcl1, tnk1, qnk1, gznk1, &
1141	t1, q1, qs1, u1, v1, gz1, &
1142	h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, &
1143	iflag, nk, icb, &
1144	cbmf, plcl, tnk, qnk, gznk, &
1145	t, q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, &
1146	dph)
1147	END IF
1148
1149	! -------------------------------------------------------------------
1150	! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
1151	! --- FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
1152	! --- &
1153	! --- COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
1154	! --- FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
1155	! --- &
1156	! --- FIND THE LEVEL OF NEUTRAL BUOYANCY
1157	! -------------------------------------------------------------------
1158
1159	IF (iflag_con==3) THEN
1160	CALL cv3_undilute2(nloc, ncum, nd, icb, icbs, nk, & !na->nd
1161	tnk, qnk, gznk, hnk, t, q, qs, gz, &
1162	p, ph, h, tv, lv, lf, pbase, buoybase, plcl, &
1163	inb, tp, tvp, clw, hp, ep, sigp, buoy, &
1164	frac &
1165	#ifdef ISO
1166	& ,xtnk,xt,xtclw,tg_save &
1167	#endif
1168	& )
1169	#ifdef ISO
1170	#ifdef ISOVERIF
1171	do k = 1, klev
1172	do i = 1, ncum
1173	if (iso_eau.gt.0) then
1174	call iso_verif_egalite_choix(xtclw(iso_eau,i,k),clw(i,k), &
1175	& 'cva_driver 650',errmax,errmaxrel)
1176	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1177	& 'cva_driver 652',errmax,errmaxrel)
1178	endif ! if (iso_eau.gt.0) then
1179	if (iso_HDO.gt.0) then
1180	call iso_verif_aberrant_choix( &
1181	& xt(iso_HDO,i,k),q(i,k), &
1182	& ridicule,deltalim,'cva_driver 794, apres undilute2')
1183	endif !if (iso_HDO.gt.0) then
1184	#ifdef ISOTRAC
1185	call iso_verif_traceur(xt(1,i,k),'cva_driver 780')
1186	call iso_verif_traceur(xtclw(1,i,k),'cva_driver 781')
1187	#endif
1188	enddo
1189	enddo
1190	#ifdef VERIFNEGATIF
1191	do i = 1, ncum
1192	do k = 1, klev
1193	call iso_verif_positif(q(i,k),'cva_driver 1052')
1194	enddo !do k = 1, klev
1195	call iso_verif_positif(qnk(i),'cva_driver 1054')
1196	enddo !do i = 1, ncum
1197	#endif
1198	#endif
1199	!write(,) 'SORTIE CV3_UNDILUTE2'
1200	#endif
1201
1202	END IF
1203
1204	IF (iflag_con==4) THEN
1205	CALL cv_undilute2(nloc, ncum, nd, icb, nk, &
1206	tnk, qnk, gznk, t, q, qs, gz, &
1207	p, dph, h, tv, lv, &
1208	inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
1209	END IF
1210
1211	! epmax_cape
1212	! on recalcule ep et hp
1213	call cv3_epmax_fn_cape(nloc,ncum,nd &
1214	, ep,hp,icb,inb,clw,nk,t,h,hnk,lv,lf,frac &
1215	, pbase, p, ph, tv, buoy, sig, w0,iflag &
1216	, epmax_diag)
1217
1218	! -------------------------------------------------------------------
1219	! --- MIXING(1) (if iflag_mix .ge. 1)
1220	! -------------------------------------------------------------------
1221	IF (iflag_con==3) THEN
1222	! IF ((iflag_ice_thermo==1) .AND. (iflag_mix/=0)) THEN
1223	! WRITE (, ) ' iflag_ice_thermo==1 requires iflag_mix==0', ' but iflag_mix=', iflag_mix, &
1224	! '. Might as well stop here.'
1225	! STOP
1226	! END IF
1227	IF (iflag_mix>=1) THEN
1228	CALL zilch(supmax, nloc*klev)
1229	CALL cv3p_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
1230	ph, t, q, qs, u, v, tra, h, lv, lf, frac, qnk, &
1231	unk, vnk, hp, tv, tvp, ep, clw, sig, &
1232	ment, qent, hent, uent, vent, nent, &
1233	sigij, elij, supmax, ments, qents, traent &
1234	#ifdef ISO
1235	& ,xt,xtnk,xtclw,xtent,xtelij,tg_save &
1236	#endif
1237	& )
1238	! print*, 'cv3p_mixing-> supmax ', (supmax(1,k), k=1,nd)
1239
1240	ELSE
1241	CALL zilch(supmax, nloc*klev)
1242	END IF
1243	END IF
1244	! -------------------------------------------------------------------
1245	! --- CLOSURE
1246	! -------------------------------------------------------------------
1247
1248
1249	IF (iflag_con==3) THEN
1250	IF (iflag_clos==0) THEN
1251	CALL cv3_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1252	pbase, p, ph, tv, buoy, &
1253	sig, w0, cape, m, iflag)
1254	END IF ! iflag_clos==0
1255
1256	ok_inhib = iflag_mix == 2
1257
1258	IF (iflag_clos==1) THEN
1259	PRINT *, ' pas d appel cv3p_closure'
1260	! c CALL cv3p_closure(nloc,ncum,nd,icb,inb ! na->nd
1261	! c : ,pbase,plcl,p,ph,tv,tvp,buoy
1262	! c : ,supmax
1263	! c o ,sig,w0,ptop2,cape,cin,m)
1264	#ifdef CAMMODIF
1265	! si m n'est pas initialise, c'est tres genant pour la suite ->
1266	! on initialise au moins a 0
1267	do k = 1, klev
1268	do i = 1, ncum
1269	m(i,k)=0.0
1270	enddo
1271	enddo
1272	#endif
1273	END IF ! iflag_clos==1
1274
1275	IF (iflag_clos==2) THEN
1276	CALL cv3p1_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1277	pbase, plcl, p, ph, tv, tvp, buoy, &
1278	supmax, ok_inhib, Ale, Alp, omega, &
1279	sig, w0, ptop2, cape, cin, m, iflag, coef_clos, &
1280	Plim1, plim2, asupmax, supmax0, &
1281	asupmaxmin, cbmf, plfc, wbeff)
1282	if (prt_level >= 10) &
1283	PRINT *, 'cv3p1_closure-> plfc,wbeff ', plfc(1), wbeff(1)
1284	END IF ! iflag_clos==2
1285
1286	IF (iflag_clos==3) THEN
1287	CALL cv3p2_closure(nloc, ncum, nd, icb, inb, & ! na->nd
1288	pbase, plcl, p, ph, tv, tvp, buoy, &
1289	supmax, ok_inhib, Ale, Alp, omega, &
1290	sig, w0, ptop2, cape, cin, m, iflag, coef_clos, &
1291	Plim1, plim2, asupmax, supmax0, &
1292	asupmaxmin, cbmf, plfc, wbeff)
1293	if (prt_level >= 10) &
1294	PRINT *, 'cv3p2_closure-> plfc,wbeff ', plfc(1), wbeff(1)
1295	END IF ! iflag_clos==3
1296	END IF ! iflag_con==3
1297
1298	IF (iflag_con==4) THEN
1299	CALL cv_closure(nloc, ncum, nd, nk, icb, &
1300	tv, tvp, p, ph, dph, plcl, cpn, &
1301	iflag, cbmf)
1302	END IF
1303
1304	! print *,'cv_closure-> cape ',cape(1)
1305
1306	! -------------------------------------------------------------------
1307	! --- MIXING(2)
1308	! -------------------------------------------------------------------
1309
1310	IF (iflag_con==3) THEN
1311	IF (iflag_mix==0) THEN
1312	CALL cv3_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb, & ! na->nd
1313	ph, t, q, qs, u, v, tra, h, lv, lf, frac, qnk, &
1314	unk, vnk, hp, tv, tvp, ep, clw, m, sig, &
1315	ment, qent, uent, vent, nent, sigij, elij, ments, qents, traent &
1316	#ifdef ISO
1317	& ,xt,xtnk,xtclw &
1318	& ,xtent,xtelij,tg_save &
1319	#endif
1320	& )
1321	CALL zilch(hent, nlocklevklev)
1322
1323	#ifdef ISO
1324	#ifdef ISOVERIF
1325	write(,) 'cva_driver 837: après cv3_mixing'
1326	write(,) 'qent,xtent(1,1,1)=',qent(1,1,1),xtent(iso_eau,1,1,1)
1327	do k = 1, klev
1328	do j = 1, klev
1329	do i = 1, ncum
1330	if (iso_eau.gt.0) then
1331	call iso_verif_egalite_choix(xtelij(iso_eau,i,j,k), &
1332	& elij(i,j,k),'cva_driver 881',errmax,errmaxrel)
1333	call iso_verif_egalite_choix(xtent(iso_eau,i,j,k), &
1334	& qent(i,j,k),'cva_driver 882',errmax,errmaxrel)
1335	endif ! if (iso_eau.gt.0) then
1336	#ifdef ISOTRAC
1337	call iso_verif_traceur_justmass(xtent(1,i,j,k), &
1338	& 'cva_driver 846')
1339	call iso_verif_traceur_justmass(xtelij(1,i,j,k), &
1340	& 'cva_driver 847')
1341	! on ne vérfier pas le deltaD ici car peut dépasser le seuil
1342	! raisonable pour températures très froides.
1343	#endif
1344	enddo !do i = 1, ncum
1345	enddo !do j = 1, klev
1346	enddo !do k = 1, klev
1347	do k = 1, klev
1348	do i = 1, ncum
1349	if (iso_eau.gt.0) then
1350	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1351	& 'cva_driver 709',errmax,errmaxrel)
1352	endif ! if (iso_eau.gt.0) then
1353	#ifdef ISOTRAC
1354	call iso_verif_traceur(xt(1,i,k),'cva_driver 856')
1355	if (option_tmin.eq.1) then
1356	if (iso_verif_positif_nostop(xtclw(index_trac( &
1357	& izone_cond,iso_eau),i,k)-xtclw(iso_eau,i,k) &
1358	& ,'cva_driver 909').eq.1) then
1359	write(,) 'i,k=',i,k
1360	write(,) 'xtclw=',xtclw(:,i,k)
1361	stop
1362	endif !if (iso_verif_positif_nostop(xtclw(index_trac(
1363	endif !if ((option_traceurs.eq.17).or.
1364	#endif
1365	#ifdef DIAGISO
1366	call iso_verif_positif(tg_save(i,k)-50.0,'cva_driver 926')
1367	#endif
1368	enddo
1369	enddo !do k = 1, klev
1370	#endif
1371	#endif
1372
1373	ELSE
1374	CALL cv3_mixscale(nloc, ncum, nd, ment, m)
1375	IF (debut) THEN
1376	PRINT *, ' cv3_mixscale-> '
1377	END IF !(debut) THEN
1378	END IF
1379	END IF
1380
1381	IF (iflag_con==4) THEN
1382	CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, &
1383	ph, t, q, qs, u, v, h, lv, qnk, &
1384	hp, tv, tvp, ep, clw, cbmf, &
1385	m, ment, qent, uent, vent, nent, sigij, elij)
1386	END IF
1387
1388	IF (debut) THEN
1389	PRINT *, ' cv_mixing ->'
1390	END IF !(debut) THEN
1391	! do i = 1,nd
1392	! print*,'cv_mixing-> i,ment ',i,(ment(1,i,j),j=1,nd)
1393	! enddo
1394
1395	! -------------------------------------------------------------------
1396	! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
1397	! -------------------------------------------------------------------
1398	IF (iflag_con==3) THEN
1399	IF (debut) THEN
1400	PRINT *, ' cva_driver -> cv3_unsat '
1401	END IF !(debut) THEN
1402	#ifdef ISO
1403	#ifdef ISOVERIF
1404	do k = 1, klev
1405	do i = 1, ncum
1406	if (iso_eau.gt.0) then
1407	call iso_verif_egalite_choix(xt(iso_eau,i,k),q(i,k), &
1408	& 'cva_driver 753',errmax,errmaxrel)
1409	endif ! if (iso_eau.gt.0) then
1410	#ifdef ISOTRAC
1411	call iso_verif_traceur(xt(1,i,k),'cva_driver 885')
1412	#endif
1413	enddo
1414	enddo !do k = 1, klev
1415	#endif
1416	#endif
1417
1418	CALL cv3_unsat(nloc, ncum, nd, nd, ntra, icb, inb, iflag, & ! na->nd
1419	t_wake, q_wake, qs_wake, gz, u, v, tra, p, ph, &
1420	th_wake, tv_wake, lv_wake, lf_wake, cpn_wake, &
1421	ep, sigp, clw, &
1422	m, ment, elij, delt, plcl, coef_clos, &
1423	mp, qp, up, vp, trap, wt, water, evap, fondue, ice, &
1424	faci, b, sigd, &
1425	wdtrainA, wdtrainM &
1426	#ifdef ISO
1427	& ,xt_wake,xtclw,xtelij &
1428	& ,xtp,xtwater,xtevap,xtice &
1429	#ifdef DIAGISO
1430	& ,wdtrain,xtwdtrain,taux_cond_conv &
1431	#endif
1432	#endif
1433	& ) ! RomP
1434	!
1435	IF (prt_level >= 10) THEN
1436	Print *, 'cva_driver after cv3_unsat:mp , water, ice, evap, fondue '
1437	DO k = 1,nd
1438	write (6, '(i4,5(1x,e13.6))'), &
1439	k, mp(idcum(igout),k), water(idcum(igout),k), ice(idcum(igout),k), &
1440	evap(idcum(igout),k), fondue(idcum(igout),k)
1441	ENDDO
1442	Print *, 'cva_driver after cv3_unsat: wdtrainA, wdtrainM '
1443	DO k = 1,nd
1444	write (6, '(i4,2(1x,e13.6))'), &
1445	k, wdtrainA(idcum(igout),k), wdtrainM(idcum(igout),k)
1446	ENDDO
1447	ENDIF
1448	!
1449	END IF !(iflag_con==3)
1450
1451	IF (iflag_con==4) THEN
1452	CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, &
1453	h, lv, ep, sigp, clw, m, ment, elij, &
1454	iflag, mp, qp, up, vp, wt, water, evap)
1455	END IF
1456
1457	IF (debut) THEN
1458	PRINT *, 'cv_unsat-> '
1459	END IF !(debut) THEN
1460
1461	#ifdef ISO
1462	#ifdef ISOTRAC
1463	if (option_traceurs.eq.6) then
1464	! on colorie les ddfts en rouge, le reste est en blanc.
1465	do k = 1, klev
1466	do i = 1, ncum
1467	do iiso=1,niso
1468	ixt_ddft=index_trac(izone_ddft,iiso)
1469	ixt_poubelle=index_trac(izone_poubelle,iiso)
1470	xtp(ixt_ddft,i,k)=xtp(ixt_ddft,i,k) &
1471	& +xtp(ixt_poubelle,i,k)
1472	xtp(ixt_poubelle,i,k)=0.0
1473	enddo !do iiso=1,niso
1474	#ifdef ISOVERIF
1475	call iso_verif_traceur(xtp(1,i,k),'cva_driver 990')
1476	#endif
1477	enddo !do i = 1, ncum
1478	enddo !do k = 1, klev
1479	else if (option_traceurs.eq.19) then
1480	! on colorie les ddfts, mais on sauve la revap
1481	do k = 1, klev
1482	do i = 1, ncum
1483	do izone=1,ntraceurs_zone
1484	if (izone.eq.izone_ddft) then
1485	do iiso=1,niso
1486	ixt_ddft=index_trac(izone,iiso)
1487	ixt_revap=index_trac(izone_revap,iiso)
1488	xtp(ixt_ddft,i,k)=xtp(iiso,i,k)-xtp(ixt_revap,i,k)
1489	enddo !do iiso=1,niso
1490	elseif (izone.eq.izone_ddft) then
1491	! rien à faire
1492	else !if (izone.eq.izone_ddft) then
1493	do iiso=1,niso
1494	ixt=index_trac(izone,iiso)
1495	xtp(ixt,i,k)=0.0
1496	enddo !do iiso=1,niso
1497	endif !if (izone.eq.izone_ddft) then
1498	enddo !do izone=1,ntraceurs_zone
1499	#ifdef ISOVERIF
1500	call iso_verif_traceur(xtp(1,i,k),'cva_driver 1059')
1501	#endif
1502	enddo !do i = 1, ncum
1503	enddo !do k = 1, klev
1504	endif !if (option_traceurs.eq.6) then
1505	#endif
1506	#endif
1507
1508	! print *,'cv_unsat-> mp ',mp
1509	! print *,'cv_unsat-> water ',water
1510	! -------------------------------------------------------------------
1511	! --- YIELD
1512	! (tendencies, precipitation, variables of interface with other
1513	! processes, etc)
1514	! -------------------------------------------------------------------
1515
1516	IF (iflag_con==3) THEN
1517
1518	CALL cv3_yield(nloc, ncum, nd, nd, ntra, ok_conserv_q, & ! na->nd
1519	icb, inb, delt, &
1520	t, q, t_wake, q_wake, s_wake, u, v, tra, &
1521	gz, p, ph, h, hp, lv, lf, cpn, th, th_wake, &
1522	ep, clw, m, tp, mp, qp, up, vp, trap, &
1523	wt, water, ice, evap, fondue, faci, b, sigd, &
1524	ment, qent, hent, iflag_mix, uent, vent, &
1525	nent, elij, traent, sig, &
1526	tv, tvp, wghti, &
1527	iflag, precip, Vprecip, Vprecipi, ft, fq, fu, fv, ftra, & ! jyg
1528	cbmf, upwd, dnwd, dnwd0, ma, mip, &
1529	!! tls, tps, & ! useless . jyg
1530	qcondc, wd, &
1531	ftd, fqd, qnk, qtc, sigt, tau_cld_cv, coefw_cld_cv &
1532	#ifdef ISO
1533	& ,xt,xt_wake,xtclw,xtp,xtwater,xtice,xtevap &
1534	& ,xtent,xtelij,xtprecip,fxt,fxtd,xtVprecip,xtVprecipi &
1535	#ifdef DIAGISO
1536	& ,fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1537	& ,fxt_detrainement,fxt_ddft,fxt_fluxmasse,fxt_evapprecip &
1538	& ,Amp_diag &
1539	& ,f_detrainement,q_detrainement,xt_detrainement &
1540	#endif
1541	#endif
1542	& )
1543	!
1544
1545	#ifdef ISOVERIF
1546	DO k = 1, nd
1547	DO i = 1, ncum
1548	if (iso_HDO.gt.0) then
1549	if (q(i,k).gt.ridicule) then
1550	call iso_verif_aberrant( &
1551	& (xt(iso_HDO,i,k)+delt*fxt(iso_HDO,i,k)) &
1552	& /(q(i,k)+delt*fq(i,k)),'cva_driver 855')
1553	endif
1554	endif
1555	if (iso_eau.gt.0) then
1556	call iso_verif_egalite_choix(fxt(iso_eau,i,k), &
1557	& fq(i,k),'cva_driver 1305',errmax,errmaxrel)
1558	endif
1559	#ifdef ISOTRAC
1560	call iso_verif_traceur(xt(1,i,k),'cva_driver 1008')
1561	#endif
1562	#ifdef DIAGISO
1563	call iso_verif_positif(tg_save(i,k)-50.0,'cva_driver 1024')
1564	#endif
1565	enddo
1566	enddo
1567	#endif
1568	IF (debut) THEN
1569	PRINT *, ' cv3_yield -> fqd(1) = ', fqd(idcum(igout), 1)
1570	END IF !(debut) THEN
1571	!
1572	IF (prt_level >= 10) THEN
1573	Print *, 'cva_driver after cv3_yield:ft(1) , ftd(1) ', &
1574	ft(idcum(igout),1), ftd(idcum(igout),1)
1575	Print *, 'cva_driver after cv3_yield:fq(1) , fqd(1) ', &
1576	fq(idcum(igout),1), fqd(idcum(igout),1)
1577	ENDIF
1578	!
1579	END IF
1580
1581	IF (iflag_con==4) THEN
1582	CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, &
1583	t, q, u, v, &
1584	gz, p, ph, h, hp, lv, cpn, &
1585	ep, clw, frac, m, mp, qp, up, vp, &
1586	wt, water, evap, &
1587	ment, qent, uent, vent, nent, elij, &
1588	tv, tvp, &
1589	iflag, wd, qprime, tprime, &
1590	precip, cbmf, ft, fq, fu, fv, ma, qcondc)
1591	END IF
1592
1593	!AC!
1594	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1595	!--- passive tracers
1596	!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1597
1598	IF (iflag_con==3) THEN
1599	!RomP >>>
1600	CALL cv3_tracer(nloc, len, ncum, nd, nd, &
1601	ment, sigij, da, phi, phi2, d1a, dam, &
1602	ep, vprecip, elij, clw, epmlmMm, eplaMm, &
1603	icb, inb)
1604	!RomP <<<
1605	END IF
1606
1607	!AC!
1608
1609	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1610	! --- UNCOMPRESS THE FIELDS
1611	! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1612
1613
1614	IF (iflag_con==3) THEN
1615	CALL cv3a_uncompress(nloc, len, ncum, nd, ntra, idcum, compress, &
1616	iflag, icb, inb, &
1617	precip, cbmf, plcl, plfc, wbeff, sig, w0, ptop2, &
1618	ft, fq, fu, fv, ftra, &
1619	sigd, ma, mip, vprecip, vprecipi, upwd, dnwd, dnwd0, &
1620	qcondc, wd, cape, cin, &
1621	tvp, &
1622	ftd, fqd, &
1623	Plim1, plim2, asupmax, supmax0, &
1624	asupmaxmin, &
1625	da, phi, mp, phi2, d1a, dam, sigij, & ! RomP
1626	clw, elij, evap, ep, epmlmMm, eplaMm, & ! RomP
1627	wdtrainA, wdtrainM, & ! RomP
1628	qtc, sigt, epmax_diag, & ! epmax_cape
1629	iflag1, kbas1, ktop1, &
1630	precip1, cbmf1, plcl1, plfc1, wbeff1, sig1, w01, ptop21, &
1631	ft1, fq1, fu1, fv1, ftra1, &
1632	sigd1, ma1, mip1, vprecip1, vprecipi1, upwd1, dnwd1, dnwd01, &
1633	qcondc1, wd1, cape1, cin1, &
1634	tvp1, &
1635	ftd1, fqd1, &
1636	Plim11, plim21, asupmax1, supmax01, &
1637	asupmaxmin1, &
1638	da1, phi1, mp1, phi21, d1a1, dam1, sigij1, & ! RomP
1639	clw1, elij1, evap1, ep1, epmlmMm1, eplaMm1, & ! RomP
1640	wdtrainA1, wdtrainM1, & ! RomP
1641	qtc1, sigt1, epmax_diag1 & ! epmax_cape
1642	#ifdef ISO
1643	& ,xtprecip,fxt,fxtd, xtVprecip,xtVprecipi &
1644	& ,xtprecip1,fxt1,fxtd1, xtVprecip1, xtVprecipi1 &
1645	#ifdef DIAGISO
1646	& , water,xtwater,qp,xtp,xtevap &
1647	& , xtclw &
1648	& , wdtrain,xtwdtrain,taux_cond_conv &
1649	& , fq_detrainement,fq_ddft,fq_fluxmasse,fq_evapprecip &
1650	& , fxt_detrainement,fxt_ddft,fxt_fluxmasse &
1651	& , fxt_evapprecip,m,Amp_diag,tg_save &
1652	& , f_detrainement,q_detrainement,xt_detrainement &
1653	& , water1,xtwater1,qp1,xtp1,xtevap1 &
1654	& , xtclw1 &
1655	& , wdtrain1,xtwdtrain1,taux_cond_conv1 &
1656	& , fq_detrainement1,fq_ddft1,fq_fluxmasse1,fq_evapprecip1 &
1657	& , fxt_detrainement1,fxt_ddft1,fxt_fluxmasse1 &
1658	& , fxt_evapprecip1,Mi1,Amp_diag1,tg_save1 &
1659	& , f_detrainement1,q_detrainement1,xt_detrainement1 &
1660	#endif
1661	#ifdef ISOVERIF
1662	& ,indice_uncompress &
1663	#endif
1664	#endif
1665	& )
1666
1667
1668	#ifdef ISOVERIF
1669	DO k = 1, nd
1670	DO i = 1, len
1671	if (iso_HDO.gt.0) then
1672	if (q1(i,k).gt.ridicule) then
1673	call iso_verif_aberrant( &
1674	& (xt1(iso_HDO,i,k)+delt*fxt1(iso_HDO,i,k)) &
1675	& /(q1(i,k)+delt*fq1(i,k)),'cva_driver 2554')
1676	endif
1677	endif !if (iso_HDO.gt.0) then
1678	if (iso_eau.gt.0) then
1679	call iso_verif_egalite_choix(fxt1(iso_eau,i,k), &
1680	& fq1(i,k),'cva_driver 1383',errmax,errmaxrel)
1681	endif
1682	do ixt=1,ntraciso
1683	if (iso_verif_noNaN_nostop(fxtd1(ixt,i,k), &
1684	& 'cva_driver 1447').eq.1) then
1685	write(,) 'i,indice_uncompress,k=', &
1686	& i,indice_uncompress(i),k
1687	stop
1688	endif !if (iso_verif_noNaN_nostop(fxtd1(ixt,i,k),
1689	enddo
1690	enddo
1691	enddo
1692	#endif
1693	END IF
1694
1695	IF (iflag_con==4) THEN
1696	CALL cv_uncompress(nloc, len, ncum, nd, idcum, &
1697	iflag, &
1698	precip, cbmf, &
1699	ft, fq, fu, fv, &
1700	ma, qcondc, &
1701	iflag1, &
1702	precip1,cbmf1, &
1703	ft1, fq1, fu1, fv1, &
1704	ma1, qcondc1)
1705	END IF
1706
1707	END IF ! ncum>0
1708
1709	!
1710	! In order take into account the possibility of changing the compression,
1711	! reset m, sig and w0 to zero for non-convective points.
1712	DO k = 1,nd-1
1713	sig1(:, k) = sig1(:, k)*coef_convective(:)
1714	w01(:, k) = w01(:, k)*coef_convective(:)
1715	ENDDO
1716
1717	IF (debut) THEN
1718	PRINT *, ' cv_uncompress -> '
1719	debut = .FALSE.
1720	END IF !(debut) THEN
1721
1722
1723	RETURN
1724	END SUBROUTINE cva_driver

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format