Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

cpl_mod.F90 @ 3331

Last change on this file since 3331 was 3331, checked in by acozic, 6 years ago
Add modification for isotopes
Property svn:executable set to ``*
File size: 55.9 KB

Line
1	!
2	MODULE cpl_mod
3	!
4	! This module excahanges and transforms all fields that should be recieved or sent to
5	! coupler. The transformation of the fields are done from the grid 1D-array in phylmd
6	! to the regular 2D grid accepted by the coupler. Cumulation of the fields for each
7	! timestep is done in here.
8	!
9	! Each type of surface that recevie fields from the coupler have a subroutine named
10	! cpl_receive_XXX_fields and each surface that have fields to be sent to the coupler
11	! have a subroutine named cpl_send_XXX_fields.
12	!
13	!*************************************************************************************
14
15	! Use statements
16	!*************************************************************************************
17	USE dimphy, ONLY : klon
18	USE mod_phys_lmdz_para
19	USE ioipsl
20	USE iophy
21
22	! The module oasis is always used. Without the cpp key CPP_COUPLE only the parameters
23	! in the module are compiled and not the subroutines.
24	USE oasis
25	USE write_field_phy
26	USE time_phylmdz_mod, ONLY: day_step_phy
27
28	! Global attributes
29	!*************************************************************************************
30	IMPLICIT NONE
31	PRIVATE
32
33	! All subroutine are public except cpl_send_all
34	PUBLIC :: cpl_init, cpl_receive_frac, cpl_receive_ocean_fields, cpl_receive_seaice_fields, &
35	cpl_send_ocean_fields, cpl_send_seaice_fields, cpl_send_land_fields, &
36	cpl_send_landice_fields, gath2cpl
37
38
39	! Declaration of module variables
40	!*************************************************************************************
41	! variable for coupling period
42	INTEGER, SAVE :: nexca
43	!$OMP THREADPRIVATE(nexca)
44
45	! variables for cumulating fields during a coupling periode :
46	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_sols, cpl_nsol, cpl_rain
47	!$OMP THREADPRIVATE(cpl_sols,cpl_nsol,cpl_rain)
48	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_snow, cpl_evap, cpl_tsol
49	!$OMP THREADPRIVATE(cpl_snow,cpl_evap,cpl_tsol)
50	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_fder, cpl_albe, cpl_taux, cpl_tauy
51	!$OMP THREADPRIVATE(cpl_fder,cpl_albe,cpl_taux,cpl_tauy)
52	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp
53	!$OMP THREADPRIVATE(cpl_windsp)
54	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_taumod
55	!$OMP THREADPRIVATE(cpl_taumod)
56	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co2
57	!$OMP THREADPRIVATE(cpl_atm_co2)
58	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_rriv2D, cpl_rcoa2D, cpl_rlic2D
59	!$OMP THREADPRIVATE(cpl_rriv2D,cpl_rcoa2D,cpl_rlic2D)
60
61	! variables read from coupler :
62	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sst ! sea surface temperature
63	!$OMP THREADPRIVATE(read_sst)
64	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sit ! sea ice temperature
65	!$OMP THREADPRIVATE(read_sit)
66	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_sic ! sea ice fraction
67	!$OMP THREADPRIVATE(read_sic)
68	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_alb_sic ! albedo at sea ice
69	!$OMP THREADPRIVATE(read_alb_sic)
70	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_u0, read_v0 ! ocean surface current
71	!$OMP THREADPRIVATE(read_u0,read_v0)
72	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: read_co2 ! ocean co2 flux
73	!$OMP THREADPRIVATE(read_co2)
74	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: unity
75	!$OMP THREADPRIVATE(unity)
76	INTEGER, SAVE :: nidct, nidcs
77	!$OMP THREADPRIVATE(nidct,nidcs)
78
79	! variables to be sent to the coupler
80	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_sols2D, cpl_nsol2D, cpl_rain2D
81	!$OMP THREADPRIVATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D)
82	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_snow2D, cpl_evap2D, cpl_tsol2D
83	!$OMP THREADPRIVATE(cpl_snow2D, cpl_evap2D, cpl_tsol2D)
84	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_fder2D, cpl_albe2D
85	!$OMP THREADPRIVATE(cpl_fder2D, cpl_albe2D)
86	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taux2D, cpl_tauy2D
87	!$OMP THREADPRIVATE(cpl_taux2D, cpl_tauy2D)
88	REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: cpl_taumod2D
89	!$OMP THREADPRIVATE(cpl_taumod2D)
90	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_windsp2D
91	!$OMP THREADPRIVATE(cpl_windsp2D)
92	REAL, ALLOCATABLE, DIMENSION(:,:), SAVE :: cpl_atm_co22D
93	!$OMP THREADPRIVATE(cpl_atm_co22D)
94
95	CONTAINS
96	!
97	!************************************************************************************
98	!
99	SUBROUTINE cpl_init(dtime, rlon, rlat)
100	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day
101	USE surface_data
102	USE indice_sol_mod
103	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
104	USE time_phylmdz_mod, ONLY: annee_ref, day_ini, itau_phy, itaufin_phy
105	USE print_control_mod, ONLY: lunout
106
107	! Input arguments
108	!*************************************************************************************
109	REAL, INTENT(IN) :: dtime
110	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
111
112	! Local variables
113	!*************************************************************************************
114	INTEGER :: error, sum_error, ig, i
115	INTEGER :: jf, nhoridct
116	INTEGER :: nhoridcs
117	INTEGER :: idtime
118	INTEGER :: idayref
119	INTEGER :: npas ! only for OASIS2
120	REAL :: zjulian
121	REAL, DIMENSION(nbp_lon,nbp_lat) :: zx_lon, zx_lat
122	CHARACTER(len = 20) :: modname = 'cpl_init'
123	CHARACTER(len = 80) :: abort_message
124	CHARACTER(len=80) :: clintocplnam, clfromcplnam
125
126	!*************************************************************************************
127	! Calculate coupling period
128	!
129	!*************************************************************************************
130
131	npas = itaufin_phy
132	! nexca = 86400 / dtime
133	nexca = t_coupl / dtime
134	WRITE(lunout,*)' ##### Ocean couple #####'
135	WRITE(lunout,*)' Valeurs des pas de temps'
136	WRITE(lunout,*)' npas = ', npas
137	WRITE(lunout,*)' nexca = ', nexca
138
139	!*************************************************************************************
140	! Allocate variables
141	!
142	!*************************************************************************************
143	error = 0
144	sum_error = 0
145
146	ALLOCATE(unity(klon), stat = error)
147	sum_error = sum_error + error
148	ALLOCATE(cpl_sols(klon,2), stat = error)
149	sum_error = sum_error + error
150	ALLOCATE(cpl_nsol(klon,2), stat = error)
151	sum_error = sum_error + error
152	ALLOCATE(cpl_rain(klon,2), stat = error)
153	sum_error = sum_error + error
154	ALLOCATE(cpl_snow(klon,2), stat = error)
155	sum_error = sum_error + error
156	ALLOCATE(cpl_evap(klon,2), stat = error)
157	sum_error = sum_error + error
158	ALLOCATE(cpl_tsol(klon,2), stat = error)
159	sum_error = sum_error + error
160	ALLOCATE(cpl_fder(klon,2), stat = error)
161	sum_error = sum_error + error
162	ALLOCATE(cpl_albe(klon,2), stat = error)
163	sum_error = sum_error + error
164	ALLOCATE(cpl_taux(klon,2), stat = error)
165	sum_error = sum_error + error
166	ALLOCATE(cpl_tauy(klon,2), stat = error)
167	sum_error = sum_error + error
168	ALLOCATE(cpl_windsp(klon,2), stat = error)
169	sum_error = sum_error + error
170	ALLOCATE(cpl_taumod(klon,2), stat = error)
171	sum_error = sum_error + error
172	ALLOCATE(cpl_rriv2D(nbp_lon,jj_nb), stat=error)
173	sum_error = sum_error + error
174	ALLOCATE(cpl_rcoa2D(nbp_lon,jj_nb), stat=error)
175	sum_error = sum_error + error
176	ALLOCATE(cpl_rlic2D(nbp_lon,jj_nb), stat=error)
177	sum_error = sum_error + error
178	ALLOCATE(read_sst(nbp_lon, jj_nb), stat = error)
179	sum_error = sum_error + error
180	ALLOCATE(read_sic(nbp_lon, jj_nb), stat = error)
181	sum_error = sum_error + error
182	ALLOCATE(read_sit(nbp_lon, jj_nb), stat = error)
183	sum_error = sum_error + error
184	ALLOCATE(read_alb_sic(nbp_lon, jj_nb), stat = error)
185	sum_error = sum_error + error
186	ALLOCATE(read_u0(nbp_lon, jj_nb), stat = error)
187	sum_error = sum_error + error
188	ALLOCATE(read_v0(nbp_lon, jj_nb), stat = error)
189	sum_error = sum_error + error
190
191	IF (carbon_cycle_cpl) THEN
192	ALLOCATE(read_co2(nbp_lon, jj_nb), stat = error)
193	sum_error = sum_error + error
194	ALLOCATE(cpl_atm_co2(klon,2), stat = error)
195	sum_error = sum_error + error
196
197	! Allocate variable in carbon_cycle_mod
198	ALLOCATE(fco2_ocn_day(klon), stat = error)
199	sum_error = sum_error + error
200	END IF
201
202	IF (sum_error /= 0) THEN
203	abort_message='Pb allocation variables couplees'
204	CALL abort_physic(modname,abort_message,1)
205	ENDIF
206	!*************************************************************************************
207	! Initialize the allocated varaibles
208	!
209	!*************************************************************************************
210	DO ig = 1, klon
211	unity(ig) = ig
212	ENDDO
213
214	!*************************************************************************************
215	! Initialize coupling
216	!
217	!*************************************************************************************
218	idtime = INT(dtime)
219	#ifdef CPP_COUPLE
220	CALL inicma
221	#endif
222
223	!*************************************************************************************
224	! initialize NetCDF output
225	!
226	!*************************************************************************************
227	IF (is_sequential) THEN
228	idayref = day_ini
229	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
230	CALL gr_fi_ecrit(1,klon,nbp_lon,nbp_lat,rlon,zx_lon)
231	DO i = 1, nbp_lon
232	zx_lon(i,1) = rlon(i+1)
233	zx_lon(i,nbp_lat) = rlon(i+1)
234	ENDDO
235	CALL gr_fi_ecrit(1,klon,nbp_lon,nbp_lat,rlat,zx_lat)
236	clintocplnam="cpl_atm_tauflx"
237	CALL histbeg(clintocplnam,nbp_lon,zx_lon(:,1),nbp_lat,zx_lat(1,:),&
238	1,nbp_lon,1,nbp_lat, itau_phy,zjulian,dtime,nhoridct,nidct)
239	! no vertical axis
240	CALL histdef(nidct, 'tauxe','tauxe', &
241	"-",nbp_lon,nbp_lat, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
242	CALL histdef(nidct, 'tauyn','tauyn', &
243	"-",nbp_lon,nbp_lat, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
244	CALL histdef(nidct, 'tmp_lon','tmp_lon', &
245	"-",nbp_lon,nbp_lat, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
246	CALL histdef(nidct, 'tmp_lat','tmp_lat', &
247	"-",nbp_lon,nbp_lat, nhoridct, 1, 1, 1, -99, 32, "inst", dtime,dtime)
248	DO jf=1,maxsend
249	IF (infosend(i)%action) THEN
250	CALL histdef(nidct, infosend(i)%name ,infosend(i)%name , &
251	"-",nbp_lon,nbp_lat,nhoridct,1,1,1,-99,32,"inst",dtime,dtime)
252	ENDIF
253	END DO
254	CALL histend(nidct)
255	CALL histsync(nidct)
256
257	clfromcplnam="cpl_atm_sst"
258	CALL histbeg(clfromcplnam,nbp_lon,zx_lon(:,1),nbp_lat,zx_lat(1,:),1,nbp_lon,1,nbp_lat, &
259	0,zjulian,dtime,nhoridcs,nidcs)
260	! no vertical axis
261	DO jf=1,maxrecv
262	IF (inforecv(i)%action) THEN
263	CALL histdef(nidcs,inforecv(i)%name ,inforecv(i)%name , &
264	"-",nbp_lon,nbp_lat,nhoridcs,1,1,1,-99,32,"inst",dtime,dtime)
265	ENDIF
266	END DO
267	CALL histend(nidcs)
268	CALL histsync(nidcs)
269
270	ENDIF ! is_sequential
271
272
273	!*************************************************************************************
274	! compatibility test
275	!
276	!*************************************************************************************
277	IF (carbon_cycle_cpl .AND. version_ocean=='opa8') THEN
278	abort_message='carbon_cycle_cpl does not work with opa8'
279	CALL abort_physic(modname,abort_message,1)
280	END IF
281
282	END SUBROUTINE cpl_init
283
284	!
285	!*************************************************************************************
286	!
287
288	SUBROUTINE cpl_receive_frac(itime, dtime, pctsrf, is_modified)
289	! This subroutine receives from coupler for both ocean and seaice
290	! 4 fields : read_sst, read_sic, read_sit and read_alb_sic.
291	! The new sea-ice-land-landice fraction is returned. The others fields
292	! are stored in this module.
293	USE surface_data
294	USE geometry_mod, ONLY : longitude_deg, latitude_deg
295	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
296	USE indice_sol_mod
297	USE time_phylmdz_mod, ONLY: start_time, itau_phy
298	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
299
300	INCLUDE "YOMCST.h"
301
302	! Arguments
303	!************************************************************************************
304	INTEGER, INTENT(IN) :: itime
305	REAL, INTENT(IN) :: dtime
306	REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: pctsrf
307	LOGICAL, INTENT(OUT) :: is_modified
308
309	! Local variables
310	!************************************************************************************
311	INTEGER :: j, i, time_sec
312	INTEGER :: itau_w
313	INTEGER, DIMENSION(nbp_lon*nbp_lat) :: ndexcs
314	CHARACTER(len = 20) :: modname = 'cpl_receive_frac'
315	CHARACTER(len = 80) :: abort_message
316	REAL, DIMENSION(klon) :: read_sic1D
317	REAL, DIMENSION(nbp_lon,jj_nb,maxrecv) :: tab_read_flds
318	REAL, DIMENSION(klon,nbsrf) :: pctsrf_old
319	REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi
320	REAL, DIMENSION(nbp_lon,jj_nb) :: tmp_lon, tmp_lat
321	REAL, DIMENSION(nbp_lon,jj_nb) :: tmp_r0
322
323	!*************************************************************************************
324	! Start calculation
325	! Get fields from coupler
326	!
327	!*************************************************************************************
328
329	is_modified=.FALSE.
330
331	! Check if right moment to receive from coupler
332	IF (MOD(itime, nexca) == 1) THEN
333	is_modified=.TRUE.
334
335	time_sec=(itime-1)*dtime
336	#ifdef CPP_COUPLE
337	!$OMP MASTER
338	CALL fromcpl(time_sec, tab_read_flds)
339	!$OMP END MASTER
340	#endif
341
342	! NetCDF output of received fields
343	IF (is_sequential) THEN
344	ndexcs(:) = 0
345	itau_w = itau_phy + itime + start_time * day_step_phy
346	DO i = 1, maxrecv
347	IF (inforecv(i)%action) THEN
348	CALL histwrite(nidcs,inforecv(i)%name,itau_w,tab_read_flds(:,:,i),nbp_lon*(nbp_lat),ndexcs)
349	ENDIF
350	END DO
351	ENDIF
352
353
354	! Save each field in a 2D array.
355	!$OMP MASTER
356	read_sst(:,:) = tab_read_flds(:,:,idr_sisutw) ! Sea surface temperature
357	read_sic(:,:) = tab_read_flds(:,:,idr_icecov) ! Sea ice concentration
358	read_alb_sic(:,:) = tab_read_flds(:,:,idr_icealw) ! Albedo at sea ice
359	read_sit(:,:) = tab_read_flds(:,:,idr_icetem) ! Sea ice temperature
360	!$OMP END MASTER
361
362	IF (cpl_current) THEN
363
364	! Transform the longitudes and latitudes on 2D arrays
365	CALL gather_omp(longitude_deg,rlon_mpi)
366	CALL gather_omp(latitude_deg,rlat_mpi)
367	!$OMP MASTER
368	CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon)
369	CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat)
370
371	! Transform the currents from cartesian to spheric coordinates
372	! tmp_r0 should be zero
373	CALL geo2atm(nbp_lon, jj_nb, tab_read_flds(:,:,idr_curenx), &
374	tab_read_flds(:,:,idr_cureny), tab_read_flds(:,:,idr_curenz), &
375	tmp_lon, tmp_lat, &
376	read_u0(:,:), read_v0(:,:), tmp_r0(:,:))
377	!$OMP END MASTER
378
379	ELSE
380	read_u0(:,:) = 0.
381	read_v0(:,:) = 0.
382	ENDIF
383
384	IF (carbon_cycle_cpl) THEN
385	!$OMP MASTER
386	read_co2(:,:) = tab_read_flds(:,:,idr_oceco2) ! CO2 flux
387	!$OMP END MASTER
388	ENDIF
389
390	!*************************************************************************************
391	! Transform seaice fraction (read_sic : ocean-seaice mask) into global
392	! fraction (pctsrf : ocean-seaice-land-landice mask)
393	!
394	!*************************************************************************************
395	CALL cpl2gath(read_sic, read_sic1D, klon, unity)
396
397	pctsrf_old(:,:) = pctsrf(:,:)
398	DO i = 1, klon
399	! treatment only of points with ocean and/or seaice
400	! old land-ocean mask can not be changed
401	IF (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic) > 0.) THEN
402	pctsrf(i,is_sic) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) &
403	* read_sic1D(i)
404	pctsrf(i,is_oce) = (pctsrf_old(i,is_oce) + pctsrf_old(i,is_sic)) &
405	- pctsrf(i,is_sic)
406	ENDIF
407	ENDDO
408
409	END IF ! if time to receive
410
411	END SUBROUTINE cpl_receive_frac
412
413	!
414	!*************************************************************************************
415	!
416
417	SUBROUTINE cpl_receive_ocean_fields(knon, knindex, tsurf_new, u0_new, v0_new)
418	!
419	! This routine returns the field for the ocean that has been read from the coupler
420	! (done earlier with cpl_receive_frac). The field is the temperature.
421	! The temperature is transformed into 1D array with valid points from index 1 to knon.
422	!
423	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, fco2_ocn_day
424	USE indice_sol_mod
425
426	! Input arguments
427	!*************************************************************************************
428	INTEGER, INTENT(IN) :: knon
429	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
430
431	! Output arguments
432	!*************************************************************************************
433	REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new
434	REAL, DIMENSION(klon), INTENT(OUT) :: u0_new
435	REAL, DIMENSION(klon), INTENT(OUT) :: v0_new
436
437	! Local variables
438	!*************************************************************************************
439	INTEGER :: i
440	INTEGER, DIMENSION(klon) :: index
441	REAL, DIMENSION(klon) :: sic_new
442
443	!*************************************************************************************
444	! Transform read_sst into compressed 1D variable tsurf_new
445	!
446	!*************************************************************************************
447	CALL cpl2gath(read_sst, tsurf_new, knon, knindex)
448	CALL cpl2gath(read_sic, sic_new, knon, knindex)
449	CALL cpl2gath(read_u0, u0_new, knon, knindex)
450	CALL cpl2gath(read_v0, v0_new, knon, knindex)
451
452	!*************************************************************************************
453	! Transform read_co2 into uncompressed 1D variable fco2_ocn_day added directly in
454	! the module carbon_cycle_mod
455	!
456	!*************************************************************************************
457	IF (carbon_cycle_cpl) THEN
458	DO i=1,klon
459	index(i)=i
460	END DO
461	CALL cpl2gath(read_co2, fco2_ocn_day, klon, index)
462	END IF
463
464	!*************************************************************************************
465	! The fields received from the coupler have to be weighted with the fraction of ocean
466	! in relation to the total sea-ice+ocean
467	!
468	!*************************************************************************************
469	DO i=1, knon
470	tsurf_new(i) = tsurf_new(i)/(1. - sic_new(i))
471	END DO
472
473	END SUBROUTINE cpl_receive_ocean_fields
474
475	!
476	!*************************************************************************************
477	!
478
479	SUBROUTINE cpl_receive_seaice_fields(knon, knindex, &
480	tsurf_new, alb_new, u0_new, v0_new)
481	!
482	! This routine returns the fields for the seaice that have been read from the coupler
483	! (done earlier with cpl_receive_frac). These fields are the temperature and
484	! albedo at sea ice surface and fraction of sea ice.
485	! The fields are transformed into 1D arrays with valid points from index 1 to knon.
486	!
487
488	! Input arguments
489	!*************************************************************************************
490	INTEGER, INTENT(IN) :: knon
491	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
492
493	! Output arguments
494	!*************************************************************************************
495	REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new
496	REAL, DIMENSION(klon), INTENT(OUT) :: alb_new
497	REAL, DIMENSION(klon), INTENT(OUT) :: u0_new
498	REAL, DIMENSION(klon), INTENT(OUT) :: v0_new
499
500	! Local variables
501	!*************************************************************************************
502	INTEGER :: i
503	REAL, DIMENSION(klon) :: sic_new
504
505	!*************************************************************************************
506	! Transform fields read from coupler from 2D into compressed 1D variables
507	!
508	!*************************************************************************************
509	CALL cpl2gath(read_sit, tsurf_new, knon, knindex)
510	CALL cpl2gath(read_alb_sic, alb_new, knon, knindex)
511	CALL cpl2gath(read_sic, sic_new, knon, knindex)
512	CALL cpl2gath(read_u0, u0_new, knon, knindex)
513	CALL cpl2gath(read_v0, v0_new, knon, knindex)
514
515	!*************************************************************************************
516	! The fields received from the coupler have to be weighted with the sea-ice
517	! concentration (in relation to the total sea-ice + ocean).
518	!
519	!*************************************************************************************
520	DO i= 1, knon
521	tsurf_new(i) = tsurf_new(i) / sic_new(i)
522	alb_new(i) = alb_new(i) / sic_new(i)
523	END DO
524
525	END SUBROUTINE cpl_receive_seaice_fields
526
527	!
528	!*************************************************************************************
529	!
530
531	SUBROUTINE cpl_send_ocean_fields(itime, knon, knindex, &
532	swdown, lwdown, fluxlat, fluxsens, &
533	precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy, windsp)
534	!
535	! This subroutine cumulates some fields for each time-step during a coupling
536	! period. At last time-step in a coupling period the fields are transformed to the
537	! grid accepted by the coupler. No sending to the coupler will be done from here
538	! (it is done in cpl_send_seaice_fields).
539	!
540	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, co2_send
541	USE indice_sol_mod
542	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
543
544	! Input arguments
545	!*************************************************************************************
546	INTEGER, INTENT(IN) :: itime
547	INTEGER, INTENT(IN) :: knon
548	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
549	REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown
550	REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens
551	REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow
552	REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder, albsol
553	REAL, DIMENSION(klon), INTENT(IN) :: taux, tauy, windsp
554
555	! Local variables
556	!*************************************************************************************
557	INTEGER :: cpl_index, ig
558	INTEGER :: error, sum_error
559	CHARACTER(len = 25) :: modname = 'cpl_send_ocean_fields'
560	CHARACTER(len = 80) :: abort_message
561
562	!*************************************************************************************
563	! Start calculation
564	! The ocean points are saved with second array index=1
565	!
566	!*************************************************************************************
567	cpl_index = 1
568
569	!*************************************************************************************
570	! Reset fields to zero in the beginning of a new coupling period
571	!
572	!*************************************************************************************
573	IF (MOD(itime, nexca) == 1) THEN
574	cpl_sols(1:knon,cpl_index) = 0.0
575	cpl_nsol(1:knon,cpl_index) = 0.0
576	cpl_rain(1:knon,cpl_index) = 0.0
577	cpl_snow(1:knon,cpl_index) = 0.0
578	cpl_evap(1:knon,cpl_index) = 0.0
579	cpl_tsol(1:knon,cpl_index) = 0.0
580	cpl_fder(1:knon,cpl_index) = 0.0
581	cpl_albe(1:knon,cpl_index) = 0.0
582	cpl_taux(1:knon,cpl_index) = 0.0
583	cpl_tauy(1:knon,cpl_index) = 0.0
584	cpl_windsp(1:knon,cpl_index) = 0.0
585	cpl_taumod(1:knon,cpl_index) = 0.0
586	IF (carbon_cycle_cpl) cpl_atm_co2(1:knon,cpl_index) = 0.0
587	ENDIF
588
589	!*************************************************************************************
590	! Cumulate at each time-step
591	!
592	!*************************************************************************************
593	DO ig = 1, knon
594	cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + &
595	swdown(ig) / REAL(nexca)
596	cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + &
597	(lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca)
598	cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + &
599	precip_rain(ig) / REAL(nexca)
600	cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + &
601	precip_snow(ig) / REAL(nexca)
602	cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + &
603	evap(ig) / REAL(nexca)
604	cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + &
605	tsurf(ig) / REAL(nexca)
606	cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + &
607	fder(ig) / REAL(nexca)
608	cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + &
609	albsol(ig) / REAL(nexca)
610	cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + &
611	taux(ig) / REAL(nexca)
612	cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + &
613	tauy(ig) / REAL(nexca)
614	cpl_windsp(ig,cpl_index) = cpl_windsp(ig,cpl_index) + &
615	windsp(ig) / REAL(nexca)
616	cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + &
617	SQRT ( taux(ig)taux(ig)+tauy(ig)tauy(ig) ) / REAL (nexca)
618
619	IF (carbon_cycle_cpl) THEN
620	cpl_atm_co2(ig,cpl_index) = cpl_atm_co2(ig,cpl_index) + &
621	co2_send(knindex(ig))/ REAL(nexca)
622	END IF
623	ENDDO
624
625	!*************************************************************************************
626	! If the time-step corresponds to the end of coupling period the
627	! fields are transformed to the 2D grid.
628	! No sending to the coupler (it is done from cpl_send_seaice_fields).
629	!
630	!*************************************************************************************
631	IF (MOD(itime, nexca) == 0) THEN
632
633	IF (.NOT. ALLOCATED(cpl_sols2D)) THEN
634	sum_error = 0
635	ALLOCATE(cpl_sols2D(nbp_lon,jj_nb,2), stat=error)
636	sum_error = sum_error + error
637	ALLOCATE(cpl_nsol2D(nbp_lon,jj_nb,2), stat=error)
638	sum_error = sum_error + error
639	ALLOCATE(cpl_rain2D(nbp_lon,jj_nb,2), stat=error)
640	sum_error = sum_error + error
641	ALLOCATE(cpl_snow2D(nbp_lon,jj_nb,2), stat=error)
642	sum_error = sum_error + error
643	ALLOCATE(cpl_evap2D(nbp_lon,jj_nb,2), stat=error)
644	sum_error = sum_error + error
645	ALLOCATE(cpl_tsol2D(nbp_lon,jj_nb,2), stat=error)
646	sum_error = sum_error + error
647	ALLOCATE(cpl_fder2D(nbp_lon,jj_nb,2), stat=error)
648	sum_error = sum_error + error
649	ALLOCATE(cpl_albe2D(nbp_lon,jj_nb,2), stat=error)
650	sum_error = sum_error + error
651	ALLOCATE(cpl_taux2D(nbp_lon,jj_nb,2), stat=error)
652	sum_error = sum_error + error
653	ALLOCATE(cpl_tauy2D(nbp_lon,jj_nb,2), stat=error)
654	sum_error = sum_error + error
655	ALLOCATE(cpl_windsp2D(nbp_lon,jj_nb), stat=error)
656	sum_error = sum_error + error
657	ALLOCATE(cpl_taumod2D(nbp_lon,jj_nb,2), stat=error)
658	sum_error = sum_error + error
659
660	IF (carbon_cycle_cpl) THEN
661	ALLOCATE(cpl_atm_co22D(nbp_lon,jj_nb), stat=error)
662	sum_error = sum_error + error
663	END IF
664
665	IF (sum_error /= 0) THEN
666	abort_message='Pb allocation variables couplees pour l''ecriture'
667	CALL abort_physic(modname,abort_message,1)
668	ENDIF
669	ENDIF
670
671
672	CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), &
673	knon, knindex)
674
675	CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), &
676	knon, knindex)
677
678	CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), &
679	knon, knindex)
680
681	CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), &
682	knon, knindex)
683
684	CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), &
685	knon, knindex)
686
687	! cpl_tsol2D(:,:,:) not used!
688	CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), &
689	knon, knindex)
690
691	! cpl_fder2D(:,:,1) not used, only cpl_fder(:,:,2)!
692	CALL gath2cpl(cpl_fder(:,cpl_index), cpl_fder2D(:,:,cpl_index), &
693	knon, knindex)
694
695	! cpl_albe2D(:,:,:) not used!
696	CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), &
697	knon, knindex)
698
699	CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), &
700	knon, knindex)
701
702	CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), &
703	knon, knindex)
704
705	CALL gath2cpl(cpl_windsp(:,cpl_index), cpl_windsp2D(:,:), &
706	knon, knindex)
707
708	CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), &
709	knon, knindex)
710
711	IF (carbon_cycle_cpl) &
712	CALL gath2cpl(cpl_atm_co2(:,cpl_index), cpl_atm_co22D(:,:), knon, knindex)
713	ENDIF
714
715	END SUBROUTINE cpl_send_ocean_fields
716
717	!
718	!*************************************************************************************
719	!
720
721	SUBROUTINE cpl_send_seaice_fields(itime, dtime, knon, knindex, &
722	pctsrf, lafin, rlon, rlat, &
723	swdown, lwdown, fluxlat, fluxsens, &
724	precip_rain, precip_snow, evap, tsurf, fder, albsol, taux, tauy)
725	!
726	! This subroutine cumulates some fields for each time-step during a coupling
727	! period. At last time-step in a coupling period the fields are transformed to the
728	! grid accepted by the coupler. All fields for all types of surfaces are sent to
729	! the coupler.
730	!
731	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
732	USE indice_sol_mod
733	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
734
735	! Input arguments
736	!*************************************************************************************
737	INTEGER, INTENT(IN) :: itime
738	INTEGER, INTENT(IN) :: knon
739	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
740	REAL, INTENT(IN) :: dtime
741	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
742	REAL, DIMENSION(klon), INTENT(IN) :: swdown, lwdown
743	REAL, DIMENSION(klon), INTENT(IN) :: fluxlat, fluxsens
744	REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow
745	REAL, DIMENSION(klon), INTENT(IN) :: evap, tsurf, fder
746	REAL, DIMENSION(klon), INTENT(IN) :: albsol, taux, tauy
747	REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf
748	LOGICAL, INTENT(IN) :: lafin
749
750	! Local variables
751	!*************************************************************************************
752	INTEGER :: cpl_index, ig
753	INTEGER :: error, sum_error
754	CHARACTER(len = 25) :: modname = 'cpl_send_seaice_fields'
755	CHARACTER(len = 80) :: abort_message
756	REAL, DIMENSION(klon) :: cpl_fder_tmp
757
758	!*************************************************************************************
759	! Start calulation
760	! The sea-ice points are saved with second array index=2
761	!
762	!*************************************************************************************
763	cpl_index = 2
764
765	!*************************************************************************************
766	! Reset fields to zero in the beginning of a new coupling period
767	!
768	!*************************************************************************************
769	IF (MOD(itime, nexca) == 1) THEN
770	cpl_sols(1:knon,cpl_index) = 0.0
771	cpl_nsol(1:knon,cpl_index) = 0.0
772	cpl_rain(1:knon,cpl_index) = 0.0
773	cpl_snow(1:knon,cpl_index) = 0.0
774	cpl_evap(1:knon,cpl_index) = 0.0
775	cpl_tsol(1:knon,cpl_index) = 0.0
776	cpl_fder(1:knon,cpl_index) = 0.0
777	cpl_albe(1:knon,cpl_index) = 0.0
778	cpl_taux(1:knon,cpl_index) = 0.0
779	cpl_tauy(1:knon,cpl_index) = 0.0
780	cpl_taumod(1:knon,cpl_index) = 0.0
781	ENDIF
782
783	!*************************************************************************************
784	! Cumulate at each time-step
785	!
786	!*************************************************************************************
787	DO ig = 1, knon
788	cpl_sols(ig,cpl_index) = cpl_sols(ig,cpl_index) + &
789	swdown(ig) / REAL(nexca)
790	cpl_nsol(ig,cpl_index) = cpl_nsol(ig,cpl_index) + &
791	(lwdown(ig) + fluxlat(ig) +fluxsens(ig)) / REAL(nexca)
792	cpl_rain(ig,cpl_index) = cpl_rain(ig,cpl_index) + &
793	precip_rain(ig) / REAL(nexca)
794	cpl_snow(ig,cpl_index) = cpl_snow(ig,cpl_index) + &
795	precip_snow(ig) / REAL(nexca)
796	cpl_evap(ig,cpl_index) = cpl_evap(ig,cpl_index) + &
797	evap(ig) / REAL(nexca)
798	cpl_tsol(ig,cpl_index) = cpl_tsol(ig,cpl_index) + &
799	tsurf(ig) / REAL(nexca)
800	cpl_fder(ig,cpl_index) = cpl_fder(ig,cpl_index) + &
801	fder(ig) / REAL(nexca)
802	cpl_albe(ig,cpl_index) = cpl_albe(ig,cpl_index) + &
803	albsol(ig) / REAL(nexca)
804	cpl_taux(ig,cpl_index) = cpl_taux(ig,cpl_index) + &
805	taux(ig) / REAL(nexca)
806	cpl_tauy(ig,cpl_index) = cpl_tauy(ig,cpl_index) + &
807	tauy(ig) / REAL(nexca)
808	cpl_taumod(ig,cpl_index) = cpl_taumod(ig,cpl_index) + &
809	SQRT ( taux(ig)taux(ig)+tauy(ig)tauy(ig) ) / REAL(nexca)
810	ENDDO
811
812	!*************************************************************************************
813	! If the time-step corresponds to the end of coupling period the
814	! fields are transformed to the 2D grid and all fields are sent to coupler.
815	!
816	!*************************************************************************************
817	IF (MOD(itime, nexca) == 0) THEN
818	IF (.NOT. ALLOCATED(cpl_sols2D)) THEN
819	sum_error = 0
820	ALLOCATE(cpl_sols2D(nbp_lon,jj_nb,2), stat=error)
821	sum_error = sum_error + error
822	ALLOCATE(cpl_nsol2D(nbp_lon,jj_nb,2), stat=error)
823	sum_error = sum_error + error
824	ALLOCATE(cpl_rain2D(nbp_lon,jj_nb,2), stat=error)
825	sum_error = sum_error + error
826	ALLOCATE(cpl_snow2D(nbp_lon,jj_nb,2), stat=error)
827	sum_error = sum_error + error
828	ALLOCATE(cpl_evap2D(nbp_lon,jj_nb,2), stat=error)
829	sum_error = sum_error + error
830	ALLOCATE(cpl_tsol2D(nbp_lon,jj_nb,2), stat=error)
831	sum_error = sum_error + error
832	ALLOCATE(cpl_fder2D(nbp_lon,jj_nb,2), stat=error)
833	sum_error = sum_error + error
834	ALLOCATE(cpl_albe2D(nbp_lon,jj_nb,2), stat=error)
835	sum_error = sum_error + error
836	ALLOCATE(cpl_taux2D(nbp_lon,jj_nb,2), stat=error)
837	sum_error = sum_error + error
838	ALLOCATE(cpl_tauy2D(nbp_lon,jj_nb,2), stat=error)
839	sum_error = sum_error + error
840	ALLOCATE(cpl_windsp2D(nbp_lon,jj_nb), stat=error)
841	sum_error = sum_error + error
842	ALLOCATE(cpl_taumod2D(nbp_lon,jj_nb,2), stat=error)
843	sum_error = sum_error + error
844
845	IF (carbon_cycle_cpl) THEN
846	ALLOCATE(cpl_atm_co22D(nbp_lon,jj_nb), stat=error)
847	sum_error = sum_error + error
848	END IF
849
850	IF (sum_error /= 0) THEN
851	abort_message='Pb allocation variables couplees pour l''ecriture'
852	CALL abort_physic(modname,abort_message,1)
853	ENDIF
854	ENDIF
855
856	CALL gath2cpl(cpl_sols(:,cpl_index), cpl_sols2D(:,:,cpl_index), &
857	knon, knindex)
858
859	CALL gath2cpl(cpl_nsol(:,cpl_index), cpl_nsol2D(:,:,cpl_index), &
860	knon, knindex)
861
862	CALL gath2cpl(cpl_rain(:,cpl_index), cpl_rain2D(:,:,cpl_index), &
863	knon, knindex)
864
865	CALL gath2cpl(cpl_snow(:,cpl_index), cpl_snow2D(:,:,cpl_index), &
866	knon, knindex)
867
868	CALL gath2cpl(cpl_evap(:,cpl_index), cpl_evap2D(:,:,cpl_index), &
869	knon, knindex)
870
871	! cpl_tsol2D(:,:,:) not used!
872	CALL gath2cpl(cpl_tsol(:,cpl_index), cpl_tsol2D(:,:, cpl_index), &
873	knon, knindex)
874
875	! Set default value and decompress before gath2cpl
876	cpl_fder_tmp(:) = -20.
877	DO ig = 1, knon
878	cpl_fder_tmp(knindex(ig))=cpl_fder(ig,cpl_index)
879	END DO
880	CALL gath2cpl(cpl_fder_tmp(:), cpl_fder2D(:,:,cpl_index), &
881	klon, unity)
882
883	! cpl_albe2D(:,:,:) not used!
884	CALL gath2cpl(cpl_albe(:,cpl_index), cpl_albe2D(:,:,cpl_index), &
885	knon, knindex)
886
887	CALL gath2cpl(cpl_taux(:,cpl_index), cpl_taux2D(:,:,cpl_index), &
888	knon, knindex)
889
890	CALL gath2cpl(cpl_tauy(:,cpl_index), cpl_tauy2D(:,:,cpl_index), &
891	knon, knindex)
892
893	CALL gath2cpl(cpl_taumod(:,cpl_index), cpl_taumod2D(:,:,cpl_index), &
894	knon, knindex)
895
896	! Send all fields
897	CALL cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat)
898	ENDIF
899
900	END SUBROUTINE cpl_send_seaice_fields
901
902	!
903	!*************************************************************************************
904	!
905
906	SUBROUTINE cpl_send_land_fields(itime, knon, knindex, rriv_in, rcoa_in)
907	!
908	! This subroutine cumulates some fields for each time-step during a coupling
909	! period. At last time-step in a coupling period the fields are transformed to the
910	! grid accepted by the coupler. No sending to the coupler will be done from here
911	! (it is done in cpl_send_seaice_fields).
912	!
913	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
914
915	! Input arguments
916	!*************************************************************************************
917	INTEGER, INTENT(IN) :: itime
918	INTEGER, INTENT(IN) :: knon
919	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
920	REAL, DIMENSION(klon), INTENT(IN) :: rriv_in
921	REAL, DIMENSION(klon), INTENT(IN) :: rcoa_in
922
923	! Local variables
924	!*************************************************************************************
925	REAL, DIMENSION(nbp_lon,jj_nb) :: rriv2D
926	REAL, DIMENSION(nbp_lon,jj_nb) :: rcoa2D
927
928	!*************************************************************************************
929	! Rearrange fields in 2D variables
930	! First initialize to zero to avoid unvalid points causing problems
931	!
932	!*************************************************************************************
933	!$OMP MASTER
934	rriv2D(:,:) = 0.0
935	rcoa2D(:,:) = 0.0
936	!$OMP END MASTER
937	CALL gath2cpl(rriv_in, rriv2D, knon, knindex)
938	CALL gath2cpl(rcoa_in, rcoa2D, knon, knindex)
939
940	!*************************************************************************************
941	! Reset cumulated fields to zero in the beginning of a new coupling period
942	!
943	!*************************************************************************************
944	IF (MOD(itime, nexca) == 1) THEN
945	!$OMP MASTER
946	cpl_rriv2D(:,:) = 0.0
947	cpl_rcoa2D(:,:) = 0.0
948	!$OMP END MASTER
949	ENDIF
950
951	!*************************************************************************************
952	! Cumulate : Following fields should be cumulated at each time-step
953	!
954	!*************************************************************************************
955	!$OMP MASTER
956	cpl_rriv2D(:,:) = cpl_rriv2D(:,:) + rriv2D(:,:) / REAL(nexca)
957	cpl_rcoa2D(:,:) = cpl_rcoa2D(:,:) + rcoa2D(:,:) / REAL(nexca)
958	!$OMP END MASTER
959
960	END SUBROUTINE cpl_send_land_fields
961
962	!
963	!*************************************************************************************
964	!
965
966	SUBROUTINE cpl_send_landice_fields(itime, knon, knindex, rlic_in)
967	! This subroutine cumulates the field for melting ice for each time-step
968	! during a coupling period. This routine will not send to coupler. Sending
969	! will be done in cpl_send_seaice_fields.
970	!
971
972	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
973
974	! Input varibales
975	!*************************************************************************************
976	INTEGER, INTENT(IN) :: itime
977	INTEGER, INTENT(IN) :: knon
978	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
979	REAL, DIMENSION(klon), INTENT(IN) :: rlic_in
980
981	! Local varibales
982	!*************************************************************************************
983	REAL, DIMENSION(nbp_lon,jj_nb) :: rlic2D
984
985	!*************************************************************************************
986	! Rearrange field in a 2D variable
987	! First initialize to zero to avoid unvalid points causing problems
988	!
989	!*************************************************************************************
990	!$OMP MASTER
991	rlic2D(:,:) = 0.0
992	!$OMP END MASTER
993	CALL gath2cpl(rlic_in, rlic2D, knon, knindex)
994
995	!*************************************************************************************
996	! Reset field to zero in the beginning of a new coupling period
997	!
998	!*************************************************************************************
999	IF (MOD(itime, nexca) == 1) THEN
1000	!$OMP MASTER
1001	cpl_rlic2D(:,:) = 0.0
1002	!$OMP END MASTER
1003	ENDIF
1004
1005	!*************************************************************************************
1006	! Cumulate : Melting ice should be cumulated at each time-step
1007	!
1008	!*************************************************************************************
1009	!$OMP MASTER
1010	cpl_rlic2D(:,:) = cpl_rlic2D(:,:) + rlic2D(:,:) / REAL(nexca)
1011	!$OMP END MASTER
1012
1013	END SUBROUTINE cpl_send_landice_fields
1014
1015	!
1016	!*************************************************************************************
1017	!
1018
1019	SUBROUTINE cpl_send_all(itime, dtime, pctsrf, lafin, rlon, rlat)
1020	! This routine will send fields for all different surfaces to the coupler.
1021	! This subroutine should be executed after calculations by the last surface(sea-ice),
1022	! all calculations at the different surfaces have to be done before.
1023	!
1024	USE surface_data
1025	USE carbon_cycle_mod, ONLY : carbon_cycle_cpl
1026	USE indice_sol_mod
1027	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
1028	USE time_phylmdz_mod, ONLY: start_time, itau_phy
1029	! Some includes
1030	!
1031	! Input arguments
1032	!*************************************************************************************
1033	INTEGER, INTENT(IN) :: itime
1034	REAL, INTENT(IN) :: dtime
1035	REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat
1036	REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf
1037	LOGICAL, INTENT(IN) :: lafin
1038
1039	! Local variables
1040	!*************************************************************************************
1041	INTEGER :: error, sum_error, j
1042	INTEGER :: itau_w
1043	INTEGER :: time_sec
1044	INTEGER, DIMENSION(nbp_lon*(nbp_lat)) :: ndexct
1045	REAL :: Up, Down
1046	REAL, DIMENSION(nbp_lon, jj_nb) :: tmp_lon, tmp_lat
1047	REAL, DIMENSION(nbp_lon, jj_nb, 4) :: pctsrf2D
1048	REAL, DIMENSION(nbp_lon, jj_nb) :: deno
1049	CHARACTER(len = 20) :: modname = 'cpl_send_all'
1050	CHARACTER(len = 80) :: abort_message
1051
1052	! Variables with fields to coupler
1053	REAL, DIMENSION(nbp_lon, jj_nb) :: tmp_taux
1054	REAL, DIMENSION(nbp_lon, jj_nb) :: tmp_tauy
1055	REAL, DIMENSION(nbp_lon, jj_nb) :: tmp_calv
1056	! Table with all fields to send to coupler
1057	REAL, DIMENSION(nbp_lon, jj_nb, maxsend) :: tab_flds
1058	REAL, DIMENSION(klon_mpi) :: rlon_mpi, rlat_mpi
1059
1060	#ifdef CPP_MPI
1061	INCLUDE 'mpif.h'
1062	INTEGER, DIMENSION(MPI_STATUS_SIZE) :: status
1063	#endif
1064
1065	! End definitions
1066	!*************************************************************************************
1067
1068
1069
1070	!*************************************************************************************
1071	! All fields are stored in a table tab_flds(:,:,:)
1072	! First store the fields which are already on the right format
1073	!
1074	!*************************************************************************************
1075	!$OMP MASTER
1076	tab_flds(:,:,ids_windsp) = cpl_windsp2D(:,:)
1077	tab_flds(:,:,ids_shfice) = cpl_sols2D(:,:,2)
1078	tab_flds(:,:,ids_nsfice) = cpl_nsol2D(:,:,2)
1079	tab_flds(:,:,ids_dflxdt) = cpl_fder2D(:,:,2)
1080
1081	IF (version_ocean=='nemo') THEN
1082	tab_flds(:,:,ids_liqrun) = cpl_rriv2D(:,:) + cpl_rcoa2D(:,:)
1083	IF (carbon_cycle_cpl) tab_flds(:,:,ids_atmco2)=cpl_atm_co22D(:,:)
1084	ELSE IF (version_ocean=='opa8') THEN
1085	tab_flds(:,:,ids_shfoce) = cpl_sols2D(:,:,1)
1086	tab_flds(:,:,ids_nsfoce) = cpl_nsol2D(:,:,1)
1087	tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2)
1088	tab_flds(:,:,ids_ocevap) = cpl_evap2D(:,:,1)
1089	tab_flds(:,:,ids_runcoa) = cpl_rcoa2D(:,:)
1090	tab_flds(:,:,ids_rivflu) = cpl_rriv2D(:,:)
1091	END IF
1092
1093	!*************************************************************************************
1094	! Transform the fraction of sub-surfaces from 1D to 2D array
1095	!
1096	!*************************************************************************************
1097	pctsrf2D(:,:,:) = 0.
1098	!$OMP END MASTER
1099	CALL gath2cpl(pctsrf(:,is_oce), pctsrf2D(:,:,is_oce), klon, unity)
1100	CALL gath2cpl(pctsrf(:,is_sic), pctsrf2D(:,:,is_sic), klon, unity)
1101	CALL gath2cpl(pctsrf(:,is_lic), pctsrf2D(:,:,is_lic), klon, unity)
1102
1103	!*************************************************************************************
1104	! Calculate the average calving per latitude
1105	! Store calving in tab_flds(:,:,19)
1106	!
1107	!*************************************************************************************
1108	IF (is_omp_root) THEN
1109
1110	DO j = 1, jj_nb
1111	tmp_calv(:,j) = DOT_PRODUCT (cpl_rlic2D(1:nbp_lon,j), &
1112	pctsrf2D(1:nbp_lon,j,is_lic)) / REAL(nbp_lon)
1113	ENDDO
1114
1115
1116	IF (is_parallel) THEN
1117	IF (.NOT. is_north_pole_dyn) THEN
1118	#ifdef CPP_MPI
1119	CALL MPI_RECV(Up,1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,status,error)
1120	CALL MPI_SEND(tmp_calv(1,1),1,MPI_REAL_LMDZ,mpi_rank-1,1234,COMM_LMDZ_PHY,error)
1121	#endif
1122	ENDIF
1123
1124	IF (.NOT. is_south_pole_dyn) THEN
1125	#ifdef CPP_MPI
1126	CALL MPI_SEND(tmp_calv(1,jj_nb),1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,error)
1127	CALL MPI_RECV(down,1,MPI_REAL_LMDZ,mpi_rank+1,1234,COMM_LMDZ_PHY,status,error)
1128	#endif
1129	ENDIF
1130
1131	IF (.NOT. is_north_pole_dyn .AND. ii_begin /=1) THEN
1132	Up=Up+tmp_calv(nbp_lon,1)
1133	tmp_calv(:,1)=Up
1134	ENDIF
1135
1136	IF (.NOT. is_south_pole_dyn .AND. ii_end /= nbp_lon) THEN
1137	Down=Down+tmp_calv(1,jj_nb)
1138	tmp_calv(:,jj_nb)=Down
1139	ENDIF
1140	ENDIF
1141
1142	tab_flds(:,:,ids_calvin) = tmp_calv(:,:)
1143
1144	!*************************************************************************************
1145	! Calculate total flux for snow, rain and wind with weighted addition using the
1146	! fractions of ocean and seaice.
1147	!
1148	!*************************************************************************************
1149	! fraction oce+seaice
1150	deno = pctsrf2D(:,:,is_oce) + pctsrf2D(:,:,is_sic)
1151
1152	IF (version_ocean=='nemo') THEN
1153	tab_flds(:,:,ids_shftot) = 0.0
1154	tab_flds(:,:,ids_nsftot) = 0.0
1155	tab_flds(:,:,ids_totrai) = 0.0
1156	tab_flds(:,:,ids_totsno) = 0.0
1157	tab_flds(:,:,ids_toteva) = 0.0
1158	tab_flds(:,:,ids_taumod) = 0.0
1159
1160	tmp_taux(:,:) = 0.0
1161	tmp_tauy(:,:) = 0.0
1162	! For all valid grid cells containing some fraction of ocean or sea-ice
1163	WHERE ( deno(:,:) /= 0 )
1164	tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1165	cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1166	tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1167	cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1168
1169	tab_flds(:,:,ids_shftot) = cpl_sols2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1170	cpl_sols2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1171	tab_flds(:,:,ids_nsftot) = cpl_nsol2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1172	cpl_nsol2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1173	tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1174	cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1175	tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1176	cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1177	tab_flds(:,:,ids_toteva) = cpl_evap2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1178	cpl_evap2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1179	tab_flds(:,:,ids_taumod) = cpl_taumod2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1180	cpl_taumod2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1181
1182	ENDWHERE
1183
1184	tab_flds(:,:,ids_icevap) = cpl_evap2D(:,:,2)
1185
1186	ELSE IF (version_ocean=='opa8') THEN
1187	! Store fields for rain and snow in tab_flds(:,:,15) and tab_flds(:,:,16)
1188	tab_flds(:,:,ids_totrai) = 0.0
1189	tab_flds(:,:,ids_totsno) = 0.0
1190	tmp_taux(:,:) = 0.0
1191	tmp_tauy(:,:) = 0.0
1192	! For all valid grid cells containing some fraction of ocean or sea-ice
1193	WHERE ( deno(:,:) /= 0 )
1194	tab_flds(:,:,ids_totrai) = cpl_rain2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1195	cpl_rain2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1196	tab_flds(:,:,ids_totsno) = cpl_snow2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1197	cpl_snow2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1198
1199	tmp_taux = cpl_taux2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1200	cpl_taux2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1201	tmp_tauy = cpl_tauy2D(:,:,1) * pctsrf2D(:,:,is_oce) / deno(:,:) + &
1202	cpl_tauy2D(:,:,2) * pctsrf2D(:,:,is_sic) / deno(:,:)
1203	ENDWHERE
1204	END IF
1205
1206	ENDIF ! is_omp_root
1207
1208	!*************************************************************************************
1209	! Transform the wind components from local atmospheric 2D coordinates to geocentric
1210	! 3D coordinates.
1211	! Store the resulting wind components in tab_flds(:,:,1:6)
1212	!*************************************************************************************
1213
1214	! Transform the longitudes and latitudes on 2D arrays
1215
1216	CALL gather_omp(rlon,rlon_mpi)
1217	CALL gather_omp(rlat,rlat_mpi)
1218	!$OMP MASTER
1219	CALL Grid1DTo2D_mpi(rlon_mpi,tmp_lon)
1220	CALL Grid1DTo2D_mpi(rlat_mpi,tmp_lat)
1221	!$OMP END MASTER
1222
1223	IF (is_sequential) THEN
1224	IF (is_north_pole_dyn) tmp_lon(:,1) = tmp_lon(:,2)
1225	IF (is_south_pole_dyn) tmp_lon(:,nbp_lat) = tmp_lon(:,nbp_lat-1)
1226	ENDIF
1227
1228	! NetCDF output of the wind before transformation of coordinate system
1229	IF (is_sequential) THEN
1230	ndexct(:) = 0
1231	itau_w = itau_phy + itime + start_time * day_step_phy
1232	CALL histwrite(nidct,'tauxe',itau_w,tmp_taux,nbp_lon*(nbp_lat),ndexct)
1233	CALL histwrite(nidct,'tauyn',itau_w,tmp_tauy,nbp_lon*(nbp_lat),ndexct)
1234	CALL histwrite(nidct,'tmp_lon',itau_w,tmp_lon,nbp_lon*(nbp_lat),ndexct)
1235	CALL histwrite(nidct,'tmp_lat',itau_w,tmp_lat,nbp_lon*(nbp_lat),ndexct)
1236	ENDIF
1237
1238	! Transform the wind from spherical atmospheric 2D coordinates to geocentric
1239	! cartesian 3D coordinates
1240	!$OMP MASTER
1241	CALL atm2geo (nbp_lon, jj_nb, tmp_taux, tmp_tauy, tmp_lon, tmp_lat, &
1242	tab_flds(:,:,ids_tauxxu), tab_flds(:,:,ids_tauyyu), tab_flds(:,:,ids_tauzzu) )
1243
1244	tab_flds(:,:,ids_tauxxv) = tab_flds(:,:,ids_tauxxu)
1245	tab_flds(:,:,ids_tauyyv) = tab_flds(:,:,ids_tauyyu)
1246	tab_flds(:,:,ids_tauzzv) = tab_flds(:,:,ids_tauzzu)
1247	!$OMP END MASTER
1248
1249	!*************************************************************************************
1250	! NetCDF output of all fields just before sending to coupler.
1251	!
1252	!*************************************************************************************
1253	IF (is_sequential) THEN
1254	DO j=1,maxsend
1255	IF (infosend(j)%action) CALL histwrite(nidct,infosend(j)%name, itau_w, &
1256	tab_flds(:,:,j),nbp_lon*(nbp_lat),ndexct)
1257	ENDDO
1258	ENDIF
1259	!*************************************************************************************
1260	! Send the table of all fields
1261	!
1262	!*************************************************************************************
1263	time_sec=(itime-1)*dtime
1264	#ifdef CPP_COUPLE
1265	!$OMP MASTER
1266	CALL intocpl(time_sec, lafin, tab_flds(:,:,:))
1267	!$OMP END MASTER
1268	#endif
1269
1270	!*************************************************************************************
1271	! Finish with some dellocate
1272	!
1273	!*************************************************************************************
1274	sum_error=0
1275	DEALLOCATE(cpl_sols2D, cpl_nsol2D, cpl_rain2D, cpl_snow2D, stat=error )
1276	sum_error = sum_error + error
1277	DEALLOCATE(cpl_evap2D, cpl_tsol2D, cpl_fder2D, cpl_albe2D, stat=error )
1278	sum_error = sum_error + error
1279	DEALLOCATE(cpl_taux2D, cpl_tauy2D, cpl_windsp2D, cpl_taumod2D, stat=error )
1280	sum_error = sum_error + error
1281
1282	IF (carbon_cycle_cpl) THEN
1283	DEALLOCATE(cpl_atm_co22D, stat=error )
1284	sum_error = sum_error + error
1285	END IF
1286
1287	IF (sum_error /= 0) THEN
1288	abort_message='Pb in deallocation of cpl_xxxx2D coupling variables'
1289	CALL abort_physic(modname,abort_message,1)
1290	ENDIF
1291
1292	END SUBROUTINE cpl_send_all
1293	!
1294	!*************************************************************************************
1295	!
1296	SUBROUTINE cpl2gath(champ_in, champ_out, knon, knindex)
1297	USE mod_phys_lmdz_para
1298	! Cette routine transforme un champs de la grille 2D recu du coupleur sur la grille
1299	! 'gathered' (la grille physiq comprime).
1300	!
1301	!
1302	! input:
1303	! champ_in champ sur la grille 2D
1304	! knon nombre de points dans le domaine a traiter
1305	! knindex index des points de la surface a traiter
1306	!
1307	! output:
1308	! champ_out champ sur la grille 'gatherd'
1309	!
1310	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
1311
1312	! Input
1313	INTEGER, INTENT(IN) :: knon
1314	REAL, DIMENSION(nbp_lon,jj_nb), INTENT(IN) :: champ_in
1315	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
1316
1317	! Output
1318	REAL, DIMENSION(klon_mpi), INTENT(OUT) :: champ_out
1319
1320	! Local
1321	INTEGER :: i, ig
1322	REAL, DIMENSION(klon_mpi) :: temp_mpi
1323	REAL, DIMENSION(klon) :: temp_omp
1324
1325	!*************************************************************************************
1326	!
1327
1328
1329	! Transform from 2 dimensions (nbp_lon,jj_nb) to 1 dimension (klon)
1330	!$OMP MASTER
1331	CALL Grid2Dto1D_mpi(champ_in,temp_mpi)
1332	!$OMP END MASTER
1333
1334	CALL scatter_omp(temp_mpi,temp_omp)
1335
1336	! Compress from klon to knon
1337	DO i = 1, knon
1338	ig = knindex(i)
1339	champ_out(i) = temp_omp(ig)
1340	ENDDO
1341
1342	END SUBROUTINE cpl2gath
1343	!
1344	!*************************************************************************************
1345	!
1346	SUBROUTINE gath2cpl(champ_in, champ_out, knon, knindex)
1347	USE mod_phys_lmdz_para
1348	! Cette routine ecrit un champ 'gathered' sur la grille 2D pour le passer
1349	! au coupleur.
1350	!
1351	! input:
1352	! champ_in champ sur la grille gathere
1353	! knon nombre de points dans le domaine a traiter
1354	! knindex index des points de la surface a traiter
1355	!
1356	! output:
1357	! champ_out champ sur la grille 2D
1358	!
1359	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
1360
1361	! Input arguments
1362	!*************************************************************************************
1363	INTEGER, INTENT(IN) :: knon
1364	REAL, DIMENSION(klon), INTENT(IN) :: champ_in
1365	INTEGER, DIMENSION(klon), INTENT(IN) :: knindex
1366
1367	! Output arguments
1368	!*************************************************************************************
1369	REAL, DIMENSION(nbp_lon,jj_nb), INTENT(OUT) :: champ_out
1370
1371	! Local variables
1372	!*************************************************************************************
1373	INTEGER :: i, ig
1374	REAL, DIMENSION(klon) :: temp_omp
1375	REAL, DIMENSION(klon_mpi) :: temp_mpi
1376	!*************************************************************************************
1377
1378	! Decompress from knon to klon
1379	temp_omp = 0.
1380	DO i = 1, knon
1381	ig = knindex(i)
1382	temp_omp(ig) = champ_in(i)
1383	ENDDO
1384
1385	! Transform from 1 dimension (klon) to 2 dimensions (nbp_lon,jj_nb)
1386	CALL gather_omp(temp_omp,temp_mpi)
1387
1388	!$OMP MASTER
1389	CALL Grid1Dto2D_mpi(temp_mpi,champ_out)
1390
1391	IF (is_north_pole_dyn) champ_out(:,1)=temp_mpi(1)
1392	IF (is_south_pole_dyn) champ_out(:,jj_nb)=temp_mpi(klon)
1393	!$OMP END MASTER
1394
1395	END SUBROUTINE gath2cpl
1396	!
1397	!*************************************************************************************
1398	!
1399	END MODULE cpl_mod
1400

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format