Context Navigation

infotrac.F90 @ 5171

Last change on this file since 5171 was 3331, checked in by acozic, 6 years ago
Add modification for isotopes
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory
File size: 34.9 KB

Line
1	! $Id$
2	!
3	MODULE infotrac
4
5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
6	INTEGER, SAVE :: nqtot
7	!CR: on ajoute le nombre de traceurs de l eau
8	INTEGER, SAVE :: nqo
9
10	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
11	! number of tracers used in the physics
12	INTEGER, SAVE :: nbtr
13
14	! CRisi: on retranche les isotopes des traceurs habituels
15	! On fait un tableaux d'indices des traceurs qui passeront dans phytrac
16	INTEGER, SAVE :: nqtottr
17	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: itr_indice
18
19	! CRisi: nb traceurs pères= directement advectés par l'air
20	INTEGER, SAVE :: nqperes
21
22	! Name variables
23	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
24	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
25
26	! iadv : index of trasport schema for each tracer
27	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
28
29	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
30	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
31	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
32
33	! CRisi: tableaux de fils
34	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqfils
35	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqdesc ! nombres de fils + nombre de tous les petits fils sur toutes les générations
36	INTEGER, SAVE :: nqdesc_tot
37	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqfils
38	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iqpere
39
40	! conv_flg(it)=0 : convection desactivated for tracer number it
41	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
42	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
43	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
44
45	CHARACTER(len=4),SAVE :: type_trac
46	CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym
47
48	! CRisi: cas particulier des isotopes
49	LOGICAL,SAVE :: ok_isotopes,ok_iso_verif,ok_isotrac,ok_init_iso
50	INTEGER :: niso_possibles
51	PARAMETER ( niso_possibles=5)
52	real, DIMENSION (niso_possibles),SAVE :: tnat,alpha_ideal
53	LOGICAL, DIMENSION(niso_possibles),SAVE :: use_iso
54	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqiso ! donne indice iq en fn de (ixt,phase)
55	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_num ! donne numéro iso entre 1 et niso_possibles en fn de nqtot
56	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_indnum ! donne numéro iso entre 1 et niso effectif en fn de nqtot
57	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: zone_num ! donne numéro de la zone de tracage en fn de nqtot
58	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: phase_num ! donne numéro de la zone de tracage en fn de nqtot
59	INTEGER, DIMENSION(niso_possibles), SAVE :: indnum_fn_num ! donne indice entre entre 1 et niso en fonction du numéro d isotope entre 1 et niso_possibles
60	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: index_trac ! numéro ixt en fn izone, indnum entre 1 et niso
61	INTEGER,SAVE :: niso,ntraceurs_zone,ntraciso
62
63	CONTAINS
64
65	SUBROUTINE infotrac_init
66	USE control_mod, ONLY: planet_type, config_inca
67	#ifdef REPROBUS
68	USE CHEM_REP, ONLY : Init_chem_rep_trac
69	#endif
70	IMPLICIT NONE
71	!=======================================================================
72	!
73	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
74	! -------
75	! Modif special traceur F.Forget 05/94
76	! Modif M-A Filiberti 02/02 lecture de traceur.def
77	!
78	! Objet:
79	! ------
80	! GCM LMD nouvelle grille
81	!
82	!=======================================================================
83	! ... modification de l'integration de q ( 26/04/94 ) ....
84	!-----------------------------------------------------------------------
85	! Declarations
86
87	INCLUDE "dimensions.h"
88	INCLUDE "iniprint.h"
89
90	! Local variables
91	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
92	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
93
94	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv_inca ! index of horizontal trasport schema
95	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv_inca ! index of vertical trasport schema
96
97	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
98	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name: CRisi
99	CHARACTER(len=3), DIMENSION(30) :: descrq
100	CHARACTER(len=1), DIMENSION(3) :: txts
101	CHARACTER(len=2), DIMENSION(9) :: txtp
102	CHARACTER(len=23) :: str1,str2
103
104	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
105	INTEGER :: iq, new_iq, iiq, jq, ierr,itr
106	INTEGER :: ifils,ipere,generation ! CRisi
107	LOGICAL :: continu,nouveau_traceurdef
108	INTEGER :: IOstatus ! gestion de la retrocompatibilite de traceur.def
109	CHARACTER(len=30) :: tchaine
110
111	character(len=*),parameter :: modname="infotrac_init"
112	!-----------------------------------------------------------------------
113	! Initialization :
114	!
115	txts=(/'x','y','z'/)
116	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
117
118	descrq(14)='VLH'
119	descrq(10)='VL1'
120	descrq(11)='VLP'
121	descrq(12)='FH1'
122	descrq(13)='FH2'
123	descrq(16)='PPM'
124	descrq(17)='PPS'
125	descrq(18)='PPP'
126	descrq(20)='SLP'
127	descrq(30)='PRA'
128
129
130	! Coherence test between parameter type_trac, config_inca and preprocessing keys
131	IF (type_trac=='inca') THEN
132	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
133	type_trac,' config_inca=',config_inca
134	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
135	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
136	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
137	END IF
138	#ifndef INCA
139	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
140	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
141	#endif
142	ELSE IF (type_trac=='repr') THEN
143	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
144	#ifndef REPROBUS
145	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
146	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
147	#endif
148	ELSE IF (type_trac == 'lmdz') THEN
149	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
150	ELSE
151	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
152	CALL abort_gcm('infotrac_init','bad parameter',1)
153	END IF
154
155
156	! Test if config_inca is other then none for run without INCA
157	IF (type_trac/='inca' .AND. config_inca/='none') THEN
158	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
159	config_inca='none'
160	END IF
161
162
163	!-----------------------------------------------------------------------
164	!
165	! 1) Get the true number of tracers + water vapor/liquid
166	! Here true tracers (nqtrue) means declared tracers (only first order)
167	!
168	!-----------------------------------------------------------------------
169	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
170	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
171	IF(ierr.EQ.0) THEN
172	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
173	READ(90,*) nqtrue
174	write(lunout,*) 'nqtrue=',nqtrue
175	ELSE
176	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
177	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
178	if (planet_type=='earth') then
179	nqtrue=4 ! Default value for Earth
180	else
181	nqtrue=1 ! Default value for other planets
182	endif
183	END IF
184	!jyg<
185	!! if ( planet_type=='earth') then
186	!! ! For Earth, water vapour & liquid tracers are not in the physics
187	!! nbtr=nqtrue-2
188	!! else
189	!! ! Other planets (for now); we have the same number of tracers
190	!! ! in the dynamics than in the physics
191	!! nbtr=nqtrue
192	!! endif
193	!>jyg
194	ELSE ! type_trac=inca
195	!jyg<
196	! The traceur.def file is used to define the number "nqo" of water phases
197	! present in the simulation. Default : nqo = 2.
198	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
199	IF(ierr.EQ.0) THEN
200	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
201	READ(90,*) nqo
202	ELSE
203	WRITE(lunout,*) trim(modname),': Using default value for nqo'
204	nqo=2
205	ENDIF
206	IF (nqo /= 2 .AND. nqo /= 3 ) THEN
207	WRITE(lunout,*) trim(modname),': nqo=',nqo, ' is not allowded. Only 2 or 3 water phases allowed'
208	CALL abort_gcm('infotrac_init','Bad number of water phases',1)
209	END IF
210	! On déplace ce qui suit plus bas, une fois qu'on connait nbtr retranché des
211	! isotopes
212	! ! nbtr has been read from INCA by init_const_lmdz() in gcm.F
213	!#ifdef INCA
214	! CALL Init_chem_inca_trac(nbtr)
215	!#endif
216	! nqtrue=nbtr+nqo
217	!
218	! ALLOCATE(hadv_inca(nbtr), vadv_inca(nbtr))
219
220	END IF ! type_trac
221	!>jyg
222
223	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
224	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
225	CALL abort_gcm('infotrac_init','Not enough tracers',1)
226	END IF
227
228	!jyg<
229	! Transfert number of tracers to Reprobus
230	!! IF (type_trac == 'repr') THEN
231	!!#ifdef REPROBUS
232	!! CALL Init_chem_rep_trac(nbtr)
233	!!#endif
234	!! END IF
235	!>jyg
236
237	!
238	! Allocate variables depending on nqtrue
239	!
240	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue),tnom_transp(nqtrue))
241
242	!
243	!jyg<
244	!! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
245	!! conv_flg(:) = 1 ! convection activated for all tracers
246	!! pbl_flg(:) = 1 ! boundary layer activated for all tracers
247	!>jyg
248
249	!-----------------------------------------------------------------------
250	! 2) Choix des schemas d'advection pour l'eau et les traceurs
251	!
252	! iadv = 1 schema transport type "humidite specifique LMD"
253	! iadv = 2 schema amont
254	! iadv = 14 schema Van-leer + humidite specifique
255	! Modif F.Codron
256	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
257	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
258	! iadv = 12 schema Frederic Hourdin I
259	! iadv = 13 schema Frederic Hourdin II
260	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
261	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
262	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
263	! iadv = 20 schema Slopes
264	! iadv = 30 schema Prather
265	!
266	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
267	! iq = 2 pour l'eau liquide
268	! Et eventuellement iq = 3,nqtot pour les autres traceurs
269	!
270	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
271	!------------------------------------------------------------------------
272	!
273	! Get choice of advection schema from file tracer.def or from INCA
274	!---------------------------------------------------------------------
275	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
276	IF(ierr.EQ.0) THEN
277	! Continue to read tracer.def
278	DO iq=1,nqtrue
279
280	write(,) 'infotrac 237: iq=',iq
281	! CRisi: ajout du nom du fluide transporteur
282	! mais rester retro compatible
283	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
284	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
285	write(lunout,*) 'tchaine=',trim(tchaine)
286	write(,) 'infotrac 238: IOstatus=',IOstatus
287	if (IOstatus.ne.0) then
288	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
289	endif
290	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
291	! espace ou pas au milieu de la chaine.
292	continu=.true.
293	nouveau_traceurdef=.false.
294	iiq=1
295	do while (continu)
296	if (tchaine(iiq:iiq).eq.' ') then
297	nouveau_traceurdef=.true.
298	continu=.false.
299	else if (iiq.lt.LEN_TRIM(tchaine)) then
300	iiq=iiq+1
301	else
302	continu=.false.
303	endif
304	enddo
305	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
306	if (nouveau_traceurdef) then
307	write(lunout,*) 'C''est la nouvelle version de traceur.def'
308	tnom_0(iq)=tchaine(1:iiq-1)
309	tnom_transp(iq)=tchaine(iiq+1:LEN_TRIM(tchaine))
310	else
311	write(lunout,*) 'C''est l''ancienne version de traceur.def'
312	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
313	tnom_0(iq)=tchaine
314	tnom_transp(iq) = 'air'
315	endif
316	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
317	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
318
319	END DO !DO iq=1,nqtrue
320	CLOSE(90)
321
322	ELSE ! Without tracer.def, set default values
323	if (planet_type=="earth") then
324	! for Earth, default is to have 4 tracers
325	hadv(1) = 14
326	vadv(1) = 14
327	tnom_0(1) = 'H2Ov'
328	tnom_transp(1) = 'air'
329	hadv(2) = 10
330	vadv(2) = 10
331	tnom_0(2) = 'H2Ol'
332	tnom_transp(2) = 'air'
333	hadv(3) = 10
334	vadv(3) = 10
335	tnom_0(3) = 'RN'
336	tnom_transp(3) = 'air'
337	hadv(4) = 10
338	vadv(4) = 10
339	tnom_0(4) = 'PB'
340	tnom_transp(4) = 'air'
341	else ! default for other planets
342	hadv(1) = 10
343	vadv(1) = 10
344	tnom_0(1) = 'dummy'
345	tnom_transp(1) = 'dummy'
346	endif ! of if (planet_type=="earth")
347	END IF
348
349	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
350	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
351	DO iq=1,nqtrue
352	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq),tnom_transp(iq)
353	END DO
354
355	if ( planet_type=='earth') then
356	!CR: nombre de traceurs de l eau
357	if (tnom_0(3) == 'H2Oi') then
358	nqo=3
359	else
360	nqo=2
361	endif
362	! For Earth, water vapour & liquid tracers are not in the physics
363	nbtr=nqtrue-nqo
364	else
365	! Other planets (for now); we have the same number of tracers
366	! in the dynamics than in the physics
367	nbtr=nqtrue
368	endif
369
370	ENDIF ! (type_trac == 'lmdz' .OR. type_trac == 'repr')
371	!jyg<
372	!
373	! On déplace ce qui suit plus bas une fois qu'on a retranché les isotopes de
374	! nbtr
375	!! Transfert number of tracers to Reprobus
376	! IF (type_trac == 'repr') THEN
377	!#ifdef REPROBUS
378	! CALL Init_chem_rep_trac(nbtr)
379	!#endif
380	! END IF
381	!
382	! Allocate variables depending on nbtr
383	!
384	! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
385	! conv_flg(:) = 1 ! convection activated for all tracers
386	! pbl_flg(:) = 1 ! boundary layer activated for all tracers
387	!
388	!! ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
389	!
390	IF (type_trac == 'inca') THEN ! config_inca='aero' ou 'chem'
391	!>jyg
392	! le module de chimie fournit les noms des traceurs
393	! et les schemas d'advection associes. excepte pour ceux lus
394	! dans traceur.def
395	IF (ierr .eq. 0) then
396	DO iq=1,nqo
397
398	write(,) 'infotrac 237: iq=',iq
399	! CRisi: ajout du nom du fluide transporteur
400	! mais rester retro compatible
401	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
402	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
403	write(lunout,*) 'tchaine=',trim(tchaine)
404	write(,) 'infotrac 238: IOstatus=',IOstatus
405	if (IOstatus.ne.0) then
406	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
407	endif
408	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
409	! espace ou pas au milieu de la chaine.
410	continu=.true.
411	nouveau_traceurdef=.false.
412	iiq=1
413	do while (continu)
414	if (tchaine(iiq:iiq).eq.' ') then
415	nouveau_traceurdef=.true.
416	continu=.false.
417	else if (iiq.lt.LEN_TRIM(tchaine)) then
418	iiq=iiq+1
419	else
420	continu=.false.
421	endif
422	enddo
423	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
424	if (nouveau_traceurdef) then
425	write(lunout,*) 'C''est la nouvelle version de traceur.def'
426	tnom_0(iq)=tchaine(1:iiq-1)
427	tnom_transp(iq)=tchaine(iiq+1:LEN_TRIM(tchaine))
428	else
429	write(lunout,*) 'C''est l''ancienne version de traceur.def'
430	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
431	tnom_0(iq)=tchaine
432	tnom_transp(iq) = 'air'
433	endif
434	write(lunout,*) 'infotrac 426: tnom_0(iq)=<',trim(tnom_0(iq)),'>'
435	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
436
437	END DO !DO iq=1,nqtrue
438	CLOSE(90)
439	ELSE !! if traceur.def doesn't exist
440	tnom_0(1)='H2Ov'
441	tnom_transp(1) = 'air'
442	tnom_0(2)='H2Ol'
443	tnom_transp(2) = 'air'
444	hadv(1) = 10
445	hadv(2) = 10
446	vadv(1) = 10
447	vadv(2) = 10
448	ENDIF
449
450	#ifdef INCA
451	CALL init_transport( &
452	hadv_inca, &
453	vadv_inca, &
454	conv_flg, &
455	pbl_flg, &
456	solsym)
457	#endif
458
459
460	!jyg<
461	DO iq = nqo+1, nqtrue
462	hadv(iq) = hadv_inca(iq-nqo)
463	vadv(iq) = vadv_inca(iq-nqo)
464	tnom_0(iq)=solsym(iq-nqo)
465	tnom_transp(iq) = 'air'
466	END DO
467
468	END IF ! (type_trac == 'inca')
469
470	!-----------------------------------------------------------------------
471	!
472	! 3) Verify if advection schema 20 or 30 choosen
473	! Calculate total number of tracers needed: nqtot
474	! Allocate variables depending on total number of tracers
475	!-----------------------------------------------------------------------
476	new_iq=0
477	DO iq=1,nqtrue
478	! Add tracers for certain advection schema
479	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
480	new_iq=new_iq+1 ! no tracers added
481	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
482	new_iq=new_iq+4 ! 3 tracers added
483	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
484	new_iq=new_iq+10 ! 9 tracers added
485	ELSE
486	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
487	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
488	END IF
489	END DO
490
491	IF (new_iq /= nqtrue) THEN
492	! The choice of advection schema imposes more tracers
493	! Assigne total number of tracers
494	nqtot = new_iq
495
496	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
497	WRITE(lunout,*) 'makes it necessary to add tracers'
498	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
499	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
500
501	ELSE
502	! The true number of tracers is also the total number
503	nqtot = nqtrue
504	END IF
505
506	!
507	! Allocate variables with total number of tracers, nqtot
508	!
509	ALLOCATE(tname(nqtot), ttext(nqtot))
510	ALLOCATE(iadv(nqtot), niadv(nqtot))
511
512	!-----------------------------------------------------------------------
513	!
514	! 4) Determine iadv, long and short name
515	!
516	!-----------------------------------------------------------------------
517	new_iq=0
518	DO iq=1,nqtrue
519	new_iq=new_iq+1
520
521	! Verify choice of advection schema
522	IF (hadv(iq)==vadv(iq)) THEN
523	iadv(new_iq)=hadv(iq)
524	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
525	iadv(new_iq)=11
526	ELSE
527	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
528
529	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
530	END IF
531
532	str1=tnom_0(iq)
533	tname(new_iq)= tnom_0(iq)
534	IF (iadv(new_iq)==0) THEN
535	ttext(new_iq)=trim(str1)
536	ELSE
537	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
538	END IF
539
540	! schemas tenant compte des moments d'ordre superieur
541	str2=ttext(new_iq)
542	IF (iadv(new_iq)==20) THEN
543	DO jq=1,3
544	new_iq=new_iq+1
545	iadv(new_iq)=-20
546	ttext(new_iq)=trim(str2)//txts(jq)
547	tname(new_iq)=trim(str1)//txts(jq)
548	END DO
549	ELSE IF (iadv(new_iq)==30) THEN
550	DO jq=1,9
551	new_iq=new_iq+1
552	iadv(new_iq)=-30
553	ttext(new_iq)=trim(str2)//txtp(jq)
554	tname(new_iq)=trim(str1)//txtp(jq)
555	END DO
556	END IF
557	END DO
558
559	!
560	! Find vector keeping the correspodence between true and total tracers
561	!
562	niadv(:)=0
563	iiq=0
564	DO iq=1,nqtot
565	IF(iadv(iq).GE.0) THEN
566	! True tracer
567	iiq=iiq+1
568	niadv(iiq)=iq
569	ENDIF
570	END DO
571
572
573	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
574	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
575	DO iq=1,nqtot
576	WRITE(lunout,*) iadv(iq),niadv(iq),&
577	' ',trim(tname(iq)),' ',trim(ttext(iq))
578	END DO
579
580	!
581	! Test for advection schema.
582	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
583	!
584	DO iq=1,nqtot
585	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
586	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
587	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
588	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
589	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
590	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
591	END IF
592	END DO
593
594
595	! CRisi: quels sont les traceurs fils et les traceurs pères.
596	! initialiser tous les tableaux d'indices liés aux traceurs familiaux
597	! + vérifier que tous les pères sont écrits en premières positions
598	ALLOCATE(nqfils(nqtot),nqdesc(nqtot))
599	ALLOCATE(iqfils(nqtot,nqtot))
600	ALLOCATE(iqpere(nqtot))
601	nqperes=0
602	nqfils(:)=0
603	nqdesc(:)=0
604	iqfils(:,:)=0
605	iqpere(:)=0
606	nqdesc_tot=0
607	DO iq=1,nqtot
608	if (tnom_transp(iq) == 'air') then
609	! ceci est un traceur père
610	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un pere'
611	nqperes=nqperes+1
612	iqpere(iq)=0
613	else !if (tnom_transp(iq) == 'air') then
614	! ceci est un fils. Qui est son père?
615	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un fils'
616	continu=.true.
617	ipere=1
618	do while (continu)
619	write(lunout,*) 'infotrac 610: ipere,tnom_0(ipere)=',ipere,tnom_0(ipere)
620	write(lunout,*) 'tnom_transp(iq)=',tnom_transp(iq)
621	if (tnom_transp(iq) == tnom_0(ipere)) then
622	! Son père est ipere
623	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
624	& trim(tnom_0(iq)),' est le fils de ',ipere,'appele ',trim(tnom_0(ipere))
625	if (iq.eq.ipere) then
626	CALL abort_gcm('infotrac_init','Un fils est son propre pere',1)
627	endif
628	nqfils(ipere)=nqfils(ipere)+1
629	iqfils(nqfils(ipere),ipere)=iq
630	iqpere(iq)=ipere
631	continu=.false.
632	else !if (tnom_transp(iq) == tnom_0(ipere)) then
633	ipere=ipere+1
634	if (ipere.gt.nqtot) then
635	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
636	& trim(tnom_0(iq)),', est orpelin.'
637	write(lunout,*) 'ipere,nqtot=',ipere,nqtot
638	CALL abort_gcm('infotrac_init','Un traceur est orphelin',1)
639	endif !if (ipere.gt.nqtot) then
640	endif !if (tnom_transp(iq) == tnom_0(ipere)) then
641	enddo !do while (continu)
642	endif !if (tnom_transp(iq) == 'air') then
643	enddo !DO iq=1,nqtot
644	WRITE(lunout,*) 'infotrac: nqperes=',nqperes
645	WRITE(lunout,*) 'nqfils=',nqfils
646	WRITE(lunout,*) 'iqpere=',iqpere
647	WRITE(lunout,*) 'iqfils=',iqfils
648
649	! Calculer le nombre de descendants à partir de iqfils et de nbfils
650	DO iq=1,nqtot
651	generation=0
652	continu=.true.
653	ifils=iq
654	do while (continu)
655	ipere=iqpere(ifils)
656	if (ipere.gt.0) then
657	nqdesc(ipere)=nqdesc(ipere)+1
658	nqdesc_tot=nqdesc_tot+1
659	iqfils(nqdesc(ipere),ipere)=iq
660	ifils=ipere
661	generation=generation+1
662	else !if (ipere.gt.0) then
663	continu=.false.
664	endif !if (ipere.gt.0) then
665	enddo !do while (continu)
666	WRITE(lunout,*) 'Le traceur ',iq,', appele ',trim(tnom_0(iq)),' est un traceur de generation: ',generation
667	enddo !DO iq=1,nqtot
668	WRITE(lunout,*) 'infotrac: nqdesc=',nqdesc
669	WRITE(lunout,*) 'iqfils=',iqfils
670	WRITE(lunout,*) 'nqdesc_tot=',nqdesc_tot
671
672	! Interdire autres schémas que 10 pour les traceurs fils, et autres schémas
673	! que 10 et 14 si des pères ont des fils
674	do iq=1,nqtot
675	if (iqpere(iq).gt.0) then
676	! ce traceur a un père qui n'est pas l'air
677	! Seul le schéma 10 est autorisé
678	if (iadv(iq)/=10) then
679	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for sons'
680	CALL abort_gcm('infotrac_init','Sons should be advected by scheme 10',1)
681	endif
682	! Le traceur père ne peut être advecté que par schéma 10 ou 14:
683	IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
684	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for fathers'
685	CALL abort_gcm('infotrac_init','Fathers should be advected by scheme 10 ou 14',1)
686	endif !IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
687	endif !if (iqpere(iq).gt.0) the
688	enddo !do iq=1,nqtot
689
690
691	! detecter quels sont les traceurs isotopiques parmi des traceurs
692	call infotrac_isoinit(tnom_0,nqtrue)
693
694	if (ntraciso.gt.0) then
695	! retrancher les traceurs isotopiques de la liste des traceurs qui passent dans
696	! phytrac
697	nbtr=nbtr-nqo*ntraciso
698
699	! faire un tableau d'indice des traceurs qui passeront dans phytrac
700	nqtottr=nqtot-nqo*(1+ntraciso)
701	write(,) 'infotrac 704: nqtottr,nqtot,nqo=',nqtottr,nqtot,nqo
702	! Rq: nqtottr n'est pas forcément égal à nbtr dans le cas où new_iq /= nqtrue
703	ALLOCATE (itr_indice(nqtot))
704	itr_indice(:)=0
705	itr=0
706	do iq=nqo+1, nqtot
707	if (iso_num(iq).eq.0) then
708	itr=itr+1
709	write(,) 'itr=',itr
710	itr_indice(itr)=iq
711	endif !if (iso_num(iq).eq.0) then
712	enddo
713	if (itr.ne.nqtottr) then
714	CALL abort_gcm('infotrac_init','pb dans le calcul de nqtottr',1)
715	endif
716	endif !if (ntraciso.gt.0) then
717
718	! on déplace les initialisations de REPROBUS ou INCA ici, avec la nouvelle
719	! valeur de nbtr
720
721	if (type_trac == 'inca') then
722	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
723	#ifdef INCA
724	CALL Init_chem_inca_trac(nbtr)
725	#endif
726	nqtrue=nbtr+nqo
727
728	ALLOCATE(hadv_inca(nbtr), vadv_inca(nbtr))
729	endif
730
731	! Transfert number of tracers to Reprobus
732	IF (type_trac == 'repr') THEN
733	#ifdef REPROBUS
734	CALL Init_chem_rep_trac(nbtr)
735	#endif
736	END IF
737	!
738	! Allocate variables depending on nbtr
739	!
740	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
741	conv_flg(:) = 1 ! convection activated for all tracers
742	pbl_flg(:) = 1 ! boundary layer activated for all tracers
743
744
745	!-----------------------------------------------------------------------
746	! Finalize :
747	!
748	DEALLOCATE(tnom_0, hadv, vadv,tnom_transp)
749
750
751	END SUBROUTINE infotrac_init
752
753	SUBROUTINE infotrac_isoinit(tnom_0,nqtrue)
754
755	#ifdef CPP_IOIPSL
756	use IOIPSL
757	#else
758	! if not using IOIPSL, we still need to use (a local version of) getin
759	use ioipsl_getincom
760	#endif
761	implicit none
762
763	! inputs
764	INTEGER nqtrue
765	CHARACTER(len=15) tnom_0(nqtrue)
766
767	! locals
768	CHARACTER(len=3), DIMENSION(niso_possibles) :: tnom_iso
769	INTEGER, ALLOCATABLE,DIMENSION(:,:) :: nb_iso,nb_traciso
770	INTEGER, ALLOCATABLE,DIMENSION(:) :: nb_isoind
771	INTEGER :: ntraceurs_zone_prec,iq,phase,ixt,iiso,izone
772	CHARACTER(len=19) :: tnom_trac
773	INCLUDE "iniprint.h"
774
775	tnom_iso=(/'eau','HDO','O18','O17','HTO'/)
776
777	ALLOCATE(nb_iso(niso_possibles,nqo))
778	ALLOCATE(nb_isoind(nqo))
779	ALLOCATE(nb_traciso(niso_possibles,nqo))
780	ALLOCATE(iso_num(nqtot))
781	ALLOCATE(iso_indnum(nqtot))
782	ALLOCATE(zone_num(nqtot))
783	ALLOCATE(phase_num(nqtot))
784
785	iso_num(:)=0
786	iso_indnum(:)=0
787	zone_num(:)=0
788	phase_num(:)=0
789	indnum_fn_num(:)=0
790	use_iso(:)=.false.
791	nb_iso(:,:)=0
792	nb_isoind(:)=0
793	nb_traciso(:,:)=0
794	niso=0
795	ntraceurs_zone=0
796	ntraceurs_zone_prec=0
797	ntraciso=0
798
799	do iq=nqo+1,nqtot
800	write(lunout,*) 'infotrac 569: iq,tnom_0(iq)=',iq,tnom_0(iq)
801	do phase=1,nqo
802	do ixt= 1,niso_possibles
803	tnom_trac=trim(tnom_0(phase))//'_'
804	tnom_trac=trim(tnom_trac)//trim(tnom_iso(ixt))
805	write(,) 'phase,ixt,tnom_trac=',phase,ixt,tnom_trac
806	IF (tnom_0(iq) == tnom_trac) then
807	write(lunout,*) 'Ce traceur est un isotope'
808	nb_iso(ixt,phase)=nb_iso(ixt,phase)+1
809	nb_isoind(phase)=nb_isoind(phase)+1
810	iso_num(iq)=ixt
811	iso_indnum(iq)=nb_isoind(phase)
812	indnum_fn_num(ixt)=iso_indnum(iq)
813	phase_num(iq)=phase
814	write(lunout,*) 'iso_num(iq)=',iso_num(iq)
815	write(lunout,*) 'iso_indnum(iq)=',iso_indnum(iq)
816	write(lunout,*) 'indnum_fn_num(ixt)=',indnum_fn_num(ixt)
817	write(lunout,*) 'phase_num(iq)=',phase_num(iq)
818	goto 20
819	else if (iqpere(iq).gt.0) then
820	if (tnom_0(iqpere(iq)) == tnom_trac) then
821	write(lunout,*) 'Ce traceur est le fils d''un isotope'
822	! c'est un traceur d'isotope
823	nb_traciso(ixt,phase)=nb_traciso(ixt,phase)+1
824	iso_num(iq)=ixt
825	iso_indnum(iq)=indnum_fn_num(ixt)
826	zone_num(iq)=nb_traciso(ixt,phase)
827	phase_num(iq)=phase
828	write(lunout,*) 'iso_num(iq)=',iso_num(iq)
829	write(lunout,*) 'phase_num(iq)=',phase_num(iq)
830	write(lunout,*) 'zone_num(iq)=',zone_num(iq)
831	goto 20
832	endif !if (tnom_0(iqpere(iq)) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
833	endif !IF (tnom_0(iq) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
834	enddo !do ixt= niso_possibles
835	enddo !do phase=1,nqo
836	20 continue
837	enddo !do iq=1,nqtot
838
839	write(lunout,*) 'iso_num=',iso_num
840	write(lunout,*) 'iso_indnum=',iso_indnum
841	write(lunout,*) 'zone_num=',zone_num
842	write(lunout,*) 'phase_num=',phase_num
843	write(lunout,*) 'indnum_fn_num=',indnum_fn_num
844	write(lunout,*) 'nb_iso=',nb_iso
845
846	do ixt= 1,niso_possibles
847
848	if (nb_iso(ixt,1).eq.1) then
849	! on vérifie que toutes les phases ont le même nombre de
850	! traceurs
851	do phase=2,nqo
852	if (nb_iso(ixt,phase).ne.nb_iso(ixt,1)) then
853	! write(lunout,*) 'ixt,phase,nb_iso=',ixt,phase,nb_iso(ixt,phase)
854	CALL abort_gcm('infotrac_init','Phases must have same number of isotopes',1)
855	endif
856	enddo !do phase=2,nqo
857
858	niso=niso+1
859	use_iso(ixt)=.true.
860	ntraceurs_zone=nb_traciso(ixt,1)
861
862	! on vérifie que toutes les phases ont le même nombre de
863	! traceurs
864	do phase=2,nqo
865	if (nb_traciso(ixt,phase).ne.ntraceurs_zone) then
866	write(lunout,*) 'ixt,phase,nb_traciso=',ixt,phase,nb_traciso(ixt,phase)
867	write(lunout,*) 'ntraceurs_zone=',ntraceurs_zone
868	CALL abort_gcm('infotrac_init','Phases must have same number of tracers',1)
869	endif
870	enddo !do phase=2,nqo
871	! on vérifie que tous les isotopes ont le même nombre de
872	! traceurs
873	if (ntraceurs_zone_prec.gt.0) then
874	if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
875	ntraceurs_zone_prec=ntraceurs_zone
876	else !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
877	write(,) 'ntraceurs_zone_prec,ntraceurs_zone=',ntraceurs_zone_prec,ntraceurs_zone
878	CALL abort_gcm('infotrac_init', &
879	&'Isotope tracers are not well defined in traceur.def',1)
880	endif !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
881	endif !if (ntraceurs_zone_prec.gt.0) then
882
883	else if (nb_iso(ixt,1).ne.0) then
884	WRITE(lunout,*) 'nqo,ixt=',nqo,ixt
885	WRITE(lunout,*) 'nb_iso(ixt,1)=',nb_iso(ixt,1)
886	CALL abort_gcm('infotrac_init','Isotopes are not well defined in traceur.def',1)
887	endif !if (nb_iso(ixt,1).eq.1) then
888	enddo ! do ixt= niso_possibles
889
890	! dimensions isotopique:
891	ntraciso=niso*(ntraceurs_zone+1)
892	WRITE(lunout,*) 'niso=',niso
893	WRITE(lunout,*) 'ntraceurs_zone,ntraciso=',ntraceurs_zone,ntraciso
894	WRITE(lunout,*) 'use_iso=',use_iso
895
896	! flags isotopiques:
897	if (niso.gt.0) then
898	ok_isotopes=.true.
899	else
900	ok_isotopes=.false.
901	endif
902	WRITE(lunout,*) 'infotrac 837: ok_isotopes=',ok_isotopes
903
904	if (ok_isotopes) then
905	ok_iso_verif=.false.
906	call getin('ok_iso_verif',ok_iso_verif)
907	ok_init_iso=.false.
908	call getin('ok_init_iso',ok_init_iso)
909	tnat=(/1.0,155.76e-6,2005.2e-6,0.004/100.,0.0/)
910	alpha_ideal=(/1.0,1.01,1.006,1.003,1.0/)
911	endif !if (ok_isotopes) then
912	! WRITE(lunout,*) 'ok_iso_verif=',ok_iso_verif
913	! WRITE(lunout,*) 'ok_init_iso=',ok_init_iso
914
915	if (ntraceurs_zone.gt.0) then
916	ok_isotrac=.true.
917	else
918	ok_isotrac=.false.
919	endif
920	! WRITE(lunout,*) 'ok_isotrac=',ok_isotrac
921
922	! remplissage du tableau iqiso(ntraciso,phase)
923	ALLOCATE(iqiso(ntraciso,nqo))
924	iqiso(:,:)=0
925	do iq=1,nqtot
926	if (iso_num(iq).gt.0) then
927	ixt=iso_indnum(iq)+zone_num(iq)*niso
928	iqiso(ixt,phase_num(iq))=iq
929	endif
930	enddo
931	! WRITE(lunout,*) 'iqiso=',iqiso
932
933	! replissage du tableau index_trac(ntraceurs_zone,niso)
934	ALLOCATE(index_trac(ntraceurs_zone,niso))
935	if (ok_isotrac) then
936	do iiso=1,niso
937	do izone=1,ntraceurs_zone
938	index_trac(izone,iiso)=iiso+izone*niso
939	enddo
940	enddo
941	else !if (ok_isotrac) then
942	index_trac(:,:)=0.0
943	endif !if (ok_isotrac) then
944	! write(lunout,*) 'index_trac=',index_trac
945
946	! Finalize :
947	DEALLOCATE(nb_iso)
948
949	END SUBROUTINE infotrac_isoinit
950
951	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format