Context Navigation

infotrac.F90 @ 5371

Last change on this file since 5371 was 3331, checked in by acozic, 7 years ago
Add modification for isotopes
Property copyright set to Name of program: LMDZ Creation date: 1984 Version: LMDZ5 License: CeCILL version 2 Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539 See the license file in the root directory
File size: 34.9 KB

Rev	Line
[1279]	1	! $Id$
	2	!
[1114]	3	MODULE infotrac
	4
	5	! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
	6	INTEGER, SAVE :: nqtot
[2086]	7	!CR: on ajoute le nombre de traceurs de l eau
	8	INTEGER, SAVE :: nqo
[1114]	9
	10	! nbtr : number of tracers not including higher order of moment or water vapor or liquid
	11	! number of tracers used in the physics
	12	INTEGER, SAVE :: nbtr
	13
[3331]	14	! CRisi: on retranche les isotopes des traceurs habituels
	15	! On fait un tableaux d'indices des traceurs qui passeront dans phytrac
	16	INTEGER, SAVE :: nqtottr
	17	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: itr_indice
	18
[2270]	19	! CRisi: nb traceurs pères= directement advectés par l'air
	20	INTEGER, SAVE :: nqperes
	21
[1114]	22	! Name variables
	23	CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
	24	CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics
	25
	26	! iadv : index of trasport schema for each tracer
	27	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iadv
	28
	29	! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the
	30	! dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code.
	31	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: niadv ! equivalent dyn / physique
	32
[2270]	33	! CRisi: tableaux de fils
	34	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqfils
	35	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: nqdesc ! nombres de fils + nombre de tous les petits fils sur toutes les générations
	36	INTEGER, SAVE :: nqdesc_tot
	37	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqfils
	38	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iqpere
	39
[1279]	40	! conv_flg(it)=0 : convection desactivated for tracer number it
[1114]	41	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: conv_flg
[1279]	42	! pbl_flg(it)=0 : boundary layer diffusion desactivaded for tracer number it
[1114]	43	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: pbl_flg
	44
[1279]	45	CHARACTER(len=4),SAVE :: type_trac
[2180]	46	CHARACTER(len=8),DIMENSION(:),ALLOCATABLE, SAVE :: solsym
[2270]	47
	48	! CRisi: cas particulier des isotopes
	49	LOGICAL,SAVE :: ok_isotopes,ok_iso_verif,ok_isotrac,ok_init_iso
	50	INTEGER :: niso_possibles
	51	PARAMETER ( niso_possibles=5)
	52	real, DIMENSION (niso_possibles),SAVE :: tnat,alpha_ideal
	53	LOGICAL, DIMENSION(niso_possibles),SAVE :: use_iso
	54	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: iqiso ! donne indice iq en fn de (ixt,phase)
	55	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_num ! donne numéro iso entre 1 et niso_possibles en fn de nqtot
	56	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: iso_indnum ! donne numéro iso entre 1 et niso effectif en fn de nqtot
	57	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: zone_num ! donne numéro de la zone de tracage en fn de nqtot
	58	INTEGER, ALLOCATABLE, DIMENSION(:), SAVE :: phase_num ! donne numéro de la zone de tracage en fn de nqtot
	59	INTEGER, DIMENSION(niso_possibles), SAVE :: indnum_fn_num ! donne indice entre entre 1 et niso en fonction du numéro d isotope entre 1 et niso_possibles
	60	INTEGER, ALLOCATABLE, DIMENSION(:,:), SAVE :: index_trac ! numéro ixt en fn izone, indnum entre 1 et niso
	61	INTEGER,SAVE :: niso,ntraceurs_zone,ntraciso
[1279]	62
[1114]	63	CONTAINS
	64
	65	SUBROUTINE infotrac_init
[2391]	66	USE control_mod, ONLY: planet_type, config_inca
[1565]	67	#ifdef REPROBUS
	68	USE CHEM_REP, ONLY : Init_chem_rep_trac
	69	#endif
[1114]	70	IMPLICIT NONE
	71	!=======================================================================
	72	!
	73	! Auteur: P. Le Van /L. Fairhead/F.Hourdin
	74	! -------
	75	! Modif special traceur F.Forget 05/94
	76	! Modif M-A Filiberti 02/02 lecture de traceur.def
	77	!
	78	! Objet:
	79	! ------
	80	! GCM LMD nouvelle grille
	81	!
	82	!=======================================================================
	83	! ... modification de l'integration de q ( 26/04/94 ) ....
	84	!-----------------------------------------------------------------------
	85	! Declarations
	86
	87	INCLUDE "dimensions.h"
	88	INCLUDE "iniprint.h"
	89
	90	! Local variables
	91	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv ! index of horizontal trasport schema
	92	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv ! index of vertical trasport schema
	93
[2566]	94	INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv_inca ! index of horizontal trasport schema
	95	INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv_inca ! index of vertical trasport schema
	96
[1279]	97	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0 ! tracer short name
[2270]	98	CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_transp ! transporting fluid short name: CRisi
[1114]	99	CHARACTER(len=3), DIMENSION(30) :: descrq
	100	CHARACTER(len=1), DIMENSION(3) :: txts
	101	CHARACTER(len=2), DIMENSION(9) :: txtp
[1454]	102	CHARACTER(len=23) :: str1,str2
[1114]	103
	104	INTEGER :: nqtrue ! number of tracers read from tracer.def, without higer order of moment
[3331]	105	INTEGER :: iq, new_iq, iiq, jq, ierr,itr
[2270]	106	INTEGER :: ifils,ipere,generation ! CRisi
	107	LOGICAL :: continu,nouveau_traceurdef
	108	INTEGER :: IOstatus ! gestion de la retrocompatibilite de traceur.def
[3331]	109	CHARACTER(len=30) :: tchaine
[1454]	110
	111	character(len=*),parameter :: modname="infotrac_init"
[1114]	112	!-----------------------------------------------------------------------
	113	! Initialization :
	114	!
	115	txts=(/'x','y','z'/)
	116	txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)
	117
	118	descrq(14)='VLH'
	119	descrq(10)='VL1'
	120	descrq(11)='VLP'
	121	descrq(12)='FH1'
	122	descrq(13)='FH2'
	123	descrq(16)='PPM'
	124	descrq(17)='PPS'
	125	descrq(18)='PPP'
	126	descrq(20)='SLP'
	127	descrq(30)='PRA'
[1279]	128
[1114]	129
[1569]	130	! Coherence test between parameter type_trac, config_inca and preprocessing keys
[1563]	131	IF (type_trac=='inca') THEN
	132	WRITE(lunout,*) 'You have choosen to couple with INCA chemestry model : type_trac=', &
	133	type_trac,' config_inca=',config_inca
[2180]	134	IF (config_inca/='aero' .AND. config_inca/='aeNP' .AND. config_inca/='chem') THEN
[1563]	135	WRITE(lunout,*) 'Incoherence between type_trac and config_inca. Model stops. Modify run.def'
	136	CALL abort_gcm('infotrac_init','Incoherence between type_trac and config_inca',1)
	137	END IF
[1569]	138	#ifndef INCA
	139	WRITE(lunout,*) 'To run this option you must add cpp key INCA and compile with INCA code'
	140	CALL abort_gcm('infotrac_init','You must compile with cpp key INCA',1)
	141	#endif
[1565]	142	ELSE IF (type_trac=='repr') THEN
	143	WRITE(lunout,*) 'You have choosen to couple with REPROBUS chemestry model : type_trac=', type_trac
[1569]	144	#ifndef REPROBUS
	145	WRITE(lunout,*) 'To run this option you must add cpp key REPROBUS and compile with REPRPBUS code'
	146	CALL abort_gcm('infotrac_init','You must compile with cpp key REPROBUS',1)
	147	#endif
[1563]	148	ELSE IF (type_trac == 'lmdz') THEN
	149	WRITE(lunout,*) 'Tracers are treated in LMDZ only : type_trac=', type_trac
[1279]	150	ELSE
[1563]	151	WRITE(lunout,*) 'type_trac=',type_trac,' not possible. Model stops'
	152	CALL abort_gcm('infotrac_init','bad parameter',1)
[1279]	153	END IF
	154
[1563]	155
	156	! Test if config_inca is other then none for run without INCA
	157	IF (type_trac/='inca' .AND. config_inca/='none') THEN
	158	WRITE(lunout,*) 'config_inca will now be changed to none as you do not couple with INCA model'
	159	config_inca='none'
	160	END IF
	161
	162
[1114]	163	!-----------------------------------------------------------------------
	164	!
	165	! 1) Get the true number of tracers + water vapor/liquid
	166	! Here true tracers (nqtrue) means declared tracers (only first order)
	167	!
	168	!-----------------------------------------------------------------------
[1565]	169	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
[1114]	170	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	171	IF(ierr.EQ.0) THEN
[1454]	172	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
[1114]	173	READ(90,*) nqtrue
[2270]	174	write(lunout,*) 'nqtrue=',nqtrue
[1114]	175	ELSE
[1454]	176	WRITE(lunout,*) trim(modname),': Problem in opening traceur.def'
	177	WRITE(lunout,*) trim(modname),': WARNING using defaut values'
	178	if (planet_type=='earth') then
	179	nqtrue=4 ! Default value for Earth
	180	else
	181	nqtrue=1 ! Default value for other planets
	182	endif
[1114]	183	END IF
[2262]	184	!jyg<
	185	!! if ( planet_type=='earth') then
	186	!! ! For Earth, water vapour & liquid tracers are not in the physics
	187	!! nbtr=nqtrue-2
	188	!! else
	189	!! ! Other planets (for now); we have the same number of tracers
	190	!! ! in the dynamics than in the physics
	191	!! nbtr=nqtrue
	192	!! endif
	193	!>jyg
[1563]	194	ELSE ! type_trac=inca
[2262]	195	!jyg<
	196	! The traceur.def file is used to define the number "nqo" of water phases
	197	! present in the simulation. Default : nqo = 2.
	198	OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
	199	IF(ierr.EQ.0) THEN
	200	WRITE(lunout,*) trim(modname),': Open traceur.def : ok'
	201	READ(90,*) nqo
	202	ELSE
	203	WRITE(lunout,*) trim(modname),': Using default value for nqo'
	204	nqo=2
	205	ENDIF
[2362]	206	IF (nqo /= 2 .AND. nqo /= 3 ) THEN
[2262]	207	WRITE(lunout,*) trim(modname),': nqo=',nqo, ' is not allowded. Only 2 or 3 water phases allowed'
	208	CALL abort_gcm('infotrac_init','Bad number of water phases',1)
	209	END IF
[3331]	210	! On déplace ce qui suit plus bas, une fois qu'on connait nbtr retranché des
	211	! isotopes
	212	! ! nbtr has been read from INCA by init_const_lmdz() in gcm.F
	213	!#ifdef INCA
	214	! CALL Init_chem_inca_trac(nbtr)
	215	!#endif
	216	! nqtrue=nbtr+nqo
	217	!
	218	! ALLOCATE(hadv_inca(nbtr), vadv_inca(nbtr))
[2567]	219
[2262]	220	END IF ! type_trac
	221	!>jyg
[1114]	222
[1454]	223	IF ((planet_type=="earth").and.(nqtrue < 2)) THEN
	224	WRITE(lunout,*) trim(modname),': nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
[1114]	225	CALL abort_gcm('infotrac_init','Not enough tracers',1)
	226	END IF
[1563]	227
[2262]	228	!jyg<
[1565]	229	! Transfert number of tracers to Reprobus
[2262]	230	!! IF (type_trac == 'repr') THEN
	231	!!#ifdef REPROBUS
	232	!! CALL Init_chem_rep_trac(nbtr)
	233	!!#endif
	234	!! END IF
	235	!>jyg
[1563]	236
[1114]	237	!
[2262]	238	! Allocate variables depending on nqtrue
[1114]	239	!
[2270]	240	ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue),tnom_transp(nqtrue))
[2566]	241
[2262]	242	!
	243	!jyg<
	244	!! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	245	!! conv_flg(:) = 1 ! convection activated for all tracers
	246	!! pbl_flg(:) = 1 ! boundary layer activated for all tracers
	247	!>jyg
[1114]	248
	249	!-----------------------------------------------------------------------
	250	! 2) Choix des schemas d'advection pour l'eau et les traceurs
	251	!
	252	! iadv = 1 schema transport type "humidite specifique LMD"
	253	! iadv = 2 schema amont
	254	! iadv = 14 schema Van-leer + humidite specifique
	255	! Modif F.Codron
	256	! iadv = 10 schema Van-leer (retenu pour l'eau vapeur et liquide)
	257	! iadv = 11 schema Van-Leer pour hadv et version PPM (Monotone) pour vadv
	258	! iadv = 12 schema Frederic Hourdin I
	259	! iadv = 13 schema Frederic Hourdin II
	260	! iadv = 16 schema PPM Monotone(Collela & Woodward 1984)
	261	! iadv = 17 schema PPM Semi Monotone (overshoots autorisés)
	262	! iadv = 18 schema PPM Positif Defini (overshoots undershoots autorisés)
	263	! iadv = 20 schema Slopes
	264	! iadv = 30 schema Prather
	265	!
	266	! Dans le tableau q(ij,l,iq) : iq = 1 pour l'eau vapeur
	267	! iq = 2 pour l'eau liquide
	268	! Et eventuellement iq = 3,nqtot pour les autres traceurs
	269	!
	270	! iadv(1): choix pour l'eau vap. et iadv(2) : choix pour l'eau liq.
	271	!------------------------------------------------------------------------
	272	!
	273	! Get choice of advection schema from file tracer.def or from INCA
	274	!---------------------------------------------------------------------
[1565]	275	IF (type_trac == 'lmdz' .OR. type_trac == 'repr') THEN
[1114]	276	IF(ierr.EQ.0) THEN
	277	! Continue to read tracer.def
	278	DO iq=1,nqtrue
[2270]	279
	280	write(,) 'infotrac 237: iq=',iq
	281	! CRisi: ajout du nom du fluide transporteur
	282	! mais rester retro compatible
	283	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	284	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	285	write(lunout,*) 'tchaine=',trim(tchaine)
	286	write(,) 'infotrac 238: IOstatus=',IOstatus
	287	if (IOstatus.ne.0) then
	288	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	289	endif
	290	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	291	! espace ou pas au milieu de la chaine.
[2391]	292	continu=.true.
	293	nouveau_traceurdef=.false.
[2270]	294	iiq=1
	295	do while (continu)
	296	if (tchaine(iiq:iiq).eq.' ') then
[2391]	297	nouveau_traceurdef=.true.
	298	continu=.false.
[2270]	299	else if (iiq.lt.LEN_TRIM(tchaine)) then
	300	iiq=iiq+1
	301	else
[2391]	302	continu=.false.
[2270]	303	endif
	304	enddo
	305	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	306	if (nouveau_traceurdef) then
	307	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	308	tnom_0(iq)=tchaine(1:iiq-1)
[3331]	309	tnom_transp(iq)=tchaine(iiq+1:LEN_TRIM(tchaine))
[2270]	310	else
	311	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	312	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	313	tnom_0(iq)=tchaine
	314	tnom_transp(iq) = 'air'
	315	endif
	316	write(lunout,*) 'tnom_0(iq)=<',trim(tnom_0(iq)),'>'
	317	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	318
	319	END DO !DO iq=1,nqtrue
[1114]	320	CLOSE(90)
[2270]	321
[1454]	322	ELSE ! Without tracer.def, set default values
	323	if (planet_type=="earth") then
	324	! for Earth, default is to have 4 tracers
[1114]	325	hadv(1) = 14
	326	vadv(1) = 14
	327	tnom_0(1) = 'H2Ov'
[2270]	328	tnom_transp(1) = 'air'
[1114]	329	hadv(2) = 10
	330	vadv(2) = 10
	331	tnom_0(2) = 'H2Ol'
[2270]	332	tnom_transp(2) = 'air'
[1114]	333	hadv(3) = 10
	334	vadv(3) = 10
	335	tnom_0(3) = 'RN'
[2270]	336	tnom_transp(3) = 'air'
[1114]	337	hadv(4) = 10
	338	vadv(4) = 10
	339	tnom_0(4) = 'PB'
[2270]	340	tnom_transp(4) = 'air'
[1454]	341	else ! default for other planets
	342	hadv(1) = 10
	343	vadv(1) = 10
	344	tnom_0(1) = 'dummy'
[2270]	345	tnom_transp(1) = 'dummy'
[1454]	346	endif ! of if (planet_type=="earth")
[1114]	347	END IF
	348
[1454]	349	WRITE(lunout,*) trim(modname),': Valeur de traceur.def :'
	350	WRITE(lunout,*) trim(modname),': nombre de traceurs ',nqtrue
[1114]	351	DO iq=1,nqtrue
[2270]	352	WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq),tnom_transp(iq)
[1114]	353	END DO
	354
[2262]	355	if ( planet_type=='earth') then
	356	!CR: nombre de traceurs de l eau
	357	if (tnom_0(3) == 'H2Oi') then
	358	nqo=3
	359	else
	360	nqo=2
	361	endif
	362	! For Earth, water vapour & liquid tracers are not in the physics
	363	nbtr=nqtrue-nqo
	364	else
	365	! Other planets (for now); we have the same number of tracers
	366	! in the dynamics than in the physics
	367	nbtr=nqtrue
	368	endif
	369
	370	ENDIF ! (type_trac == 'lmdz' .OR. type_trac == 'repr')
	371	!jyg<
	372	!
[3331]	373	! On déplace ce qui suit plus bas une fois qu'on a retranché les isotopes de
	374	! nbtr
	375	!! Transfert number of tracers to Reprobus
	376	! IF (type_trac == 'repr') THEN
	377	!#ifdef REPROBUS
	378	! CALL Init_chem_rep_trac(nbtr)
	379	!#endif
	380	! END IF
[2262]	381	!
	382	! Allocate variables depending on nbtr
	383	!
[3331]	384	! ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	385	! conv_flg(:) = 1 ! convection activated for all tracers
	386	! pbl_flg(:) = 1 ! boundary layer activated for all tracers
[2262]	387	!
	388	!! ELSE ! type_trac=inca : config_inca='aero' ou 'chem'
	389	!
	390	IF (type_trac == 'inca') THEN ! config_inca='aero' ou 'chem'
	391	!>jyg
[1114]	392	! le module de chimie fournit les noms des traceurs
[2566]	393	! et les schemas d'advection associes. excepte pour ceux lus
	394	! dans traceur.def
	395	IF (ierr .eq. 0) then
	396	DO iq=1,nqo
	397
	398	write(,) 'infotrac 237: iq=',iq
	399	! CRisi: ajout du nom du fluide transporteur
	400	! mais rester retro compatible
	401	READ(90,'(I2,X,I2,X,A)',IOSTAT=IOstatus) hadv(iq),vadv(iq),tchaine
	402	write(lunout,*) 'iq,hadv(iq),vadv(iq)=',iq,hadv(iq),vadv(iq)
	403	write(lunout,*) 'tchaine=',trim(tchaine)
	404	write(,) 'infotrac 238: IOstatus=',IOstatus
	405	if (IOstatus.ne.0) then
	406	CALL abort_gcm('infotrac_init','Pb dans la lecture de traceur.def',1)
	407	endif
	408	! Y-a-t-il 1 ou 2 noms de traceurs? -> On regarde s'il y a un
	409	! espace ou pas au milieu de la chaine.
	410	continu=.true.
	411	nouveau_traceurdef=.false.
	412	iiq=1
	413	do while (continu)
	414	if (tchaine(iiq:iiq).eq.' ') then
	415	nouveau_traceurdef=.true.
	416	continu=.false.
	417	else if (iiq.lt.LEN_TRIM(tchaine)) then
	418	iiq=iiq+1
	419	else
	420	continu=.false.
	421	endif
	422	enddo
	423	write(,) 'iiq,nouveau_traceurdef=',iiq,nouveau_traceurdef
	424	if (nouveau_traceurdef) then
	425	write(lunout,*) 'C''est la nouvelle version de traceur.def'
	426	tnom_0(iq)=tchaine(1:iiq-1)
[3331]	427	tnom_transp(iq)=tchaine(iiq+1:LEN_TRIM(tchaine))
[2566]	428	else
	429	write(lunout,*) 'C''est l''ancienne version de traceur.def'
	430	write(lunout,*) 'On suppose que les traceurs sont tous d''air'
	431	tnom_0(iq)=tchaine
	432	tnom_transp(iq) = 'air'
	433	endif
[3331]	434	write(lunout,*) 'infotrac 426: tnom_0(iq)=<',trim(tnom_0(iq)),'>'
[2566]	435	write(lunout,*) 'tnom_transp(iq)=<',trim(tnom_transp(iq)),'>'
	436
	437	END DO !DO iq=1,nqtrue
	438	CLOSE(90)
	439	ELSE !! if traceur.def doesn't exist
	440	tnom_0(1)='H2Ov'
	441	tnom_transp(1) = 'air'
	442	tnom_0(2)='H2Ol'
	443	tnom_transp(2) = 'air'
	444	hadv(1) = 10
	445	hadv(2) = 10
	446	vadv(1) = 10
	447	vadv(2) = 10
	448	ENDIF
	449
[1114]	450	#ifdef INCA
	451	CALL init_transport( &
[2566]	452	hadv_inca, &
	453	vadv_inca, &
[1114]	454	conv_flg, &
	455	pbl_flg, &
[2180]	456	solsym)
[1114]	457	#endif
	458
[2566]	459
[2262]	460	!jyg<
	461	DO iq = nqo+1, nqtrue
[2566]	462	hadv(iq) = hadv_inca(iq-nqo)
	463	vadv(iq) = vadv_inca(iq-nqo)
[2262]	464	tnom_0(iq)=solsym(iq-nqo)
[2362]	465	tnom_transp(iq) = 'air'
[1114]	466	END DO
	467
[2262]	468	END IF ! (type_trac == 'inca')
[1114]	469
	470	!-----------------------------------------------------------------------
	471	!
	472	! 3) Verify if advection schema 20 or 30 choosen
	473	! Calculate total number of tracers needed: nqtot
	474	! Allocate variables depending on total number of tracers
	475	!-----------------------------------------------------------------------
	476	new_iq=0
	477	DO iq=1,nqtrue
	478	! Add tracers for certain advection schema
	479	IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
	480	new_iq=new_iq+1 ! no tracers added
	481	ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
	482	new_iq=new_iq+4 ! 3 tracers added
	483	ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
	484	new_iq=new_iq+10 ! 9 tracers added
	485	ELSE
[1454]	486	WRITE(lunout,*) trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
[1114]	487	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
	488	END IF
	489	END DO
	490
	491	IF (new_iq /= nqtrue) THEN
	492	! The choice of advection schema imposes more tracers
	493	! Assigne total number of tracers
	494	nqtot = new_iq
	495
[1454]	496	WRITE(lunout,*) trim(modname),': The choice of advection schema for one or more tracers'
[1114]	497	WRITE(lunout,*) 'makes it necessary to add tracers'
[1454]	498	WRITE(lunout,*) trim(modname)//': ',nqtrue,' is the number of true tracers'
	499	WRITE(lunout,*) trim(modname)//': ',nqtot, ' is the total number of tracers needed'
[1114]	500
	501	ELSE
	502	! The true number of tracers is also the total number
	503	nqtot = nqtrue
	504	END IF
	505
	506	!
	507	! Allocate variables with total number of tracers, nqtot
	508	!
	509	ALLOCATE(tname(nqtot), ttext(nqtot))
	510	ALLOCATE(iadv(nqtot), niadv(nqtot))
	511
	512	!-----------------------------------------------------------------------
	513	!
	514	! 4) Determine iadv, long and short name
	515	!
	516	!-----------------------------------------------------------------------
	517	new_iq=0
	518	DO iq=1,nqtrue
	519	new_iq=new_iq+1
	520
	521	! Verify choice of advection schema
	522	IF (hadv(iq)==vadv(iq)) THEN
	523	iadv(new_iq)=hadv(iq)
	524	ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
	525	iadv(new_iq)=11
	526	ELSE
[1454]	527	WRITE(lunout,*)trim(modname),': This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
	528
[1114]	529	CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
	530	END IF
	531
	532	str1=tnom_0(iq)
	533	tname(new_iq)= tnom_0(iq)
	534	IF (iadv(new_iq)==0) THEN
[1454]	535	ttext(new_iq)=trim(str1)
[1114]	536	ELSE
[1454]	537	ttext(new_iq)=trim(tnom_0(iq))//descrq(iadv(new_iq))
[1114]	538	END IF
	539
	540	! schemas tenant compte des moments d'ordre superieur
	541	str2=ttext(new_iq)
	542	IF (iadv(new_iq)==20) THEN
	543	DO jq=1,3
	544	new_iq=new_iq+1
	545	iadv(new_iq)=-20
[1454]	546	ttext(new_iq)=trim(str2)//txts(jq)
	547	tname(new_iq)=trim(str1)//txts(jq)
[1114]	548	END DO
	549	ELSE IF (iadv(new_iq)==30) THEN
	550	DO jq=1,9
	551	new_iq=new_iq+1
	552	iadv(new_iq)=-30
[1454]	553	ttext(new_iq)=trim(str2)//txtp(jq)
	554	tname(new_iq)=trim(str1)//txtp(jq)
[1114]	555	END DO
	556	END IF
	557	END DO
	558
	559	!
	560	! Find vector keeping the correspodence between true and total tracers
	561	!
	562	niadv(:)=0
	563	iiq=0
	564	DO iq=1,nqtot
	565	IF(iadv(iq).GE.0) THEN
	566	! True tracer
	567	iiq=iiq+1
	568	niadv(iiq)=iq
	569	ENDIF
	570	END DO
	571
	572
[1454]	573	WRITE(lunout,*) trim(modname),': Information stored in infotrac :'
	574	WRITE(lunout,*) trim(modname),': iadv niadv tname ttext :'
[1114]	575	DO iq=1,nqtot
[1454]	576	WRITE(lunout,*) iadv(iq),niadv(iq),&
	577	' ',trim(tname(iq)),' ',trim(ttext(iq))
[1114]	578	END DO
	579
[1279]	580	!
	581	! Test for advection schema.
	582	! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
	583	!
	584	DO iq=1,nqtot
	585	IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
[1454]	586	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	587	CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
	588	ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
[1454]	589	WRITE(lunout,*)trim(modname),'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
[1279]	590	CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
	591	END IF
	592	END DO
	593
[2270]	594
	595	! CRisi: quels sont les traceurs fils et les traceurs pères.
	596	! initialiser tous les tableaux d'indices liés aux traceurs familiaux
	597	! + vérifier que tous les pères sont écrits en premières positions
	598	ALLOCATE(nqfils(nqtot),nqdesc(nqtot))
	599	ALLOCATE(iqfils(nqtot,nqtot))
	600	ALLOCATE(iqpere(nqtot))
	601	nqperes=0
	602	nqfils(:)=0
	603	nqdesc(:)=0
	604	iqfils(:,:)=0
	605	iqpere(:)=0
	606	nqdesc_tot=0
	607	DO iq=1,nqtot
	608	if (tnom_transp(iq) == 'air') then
	609	! ceci est un traceur père
	610	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un pere'
	611	nqperes=nqperes+1
	612	iqpere(iq)=0
	613	else !if (tnom_transp(iq) == 'air') then
	614	! ceci est un fils. Qui est son père?
	615	WRITE(lunout,*) 'Le traceur',iq,', appele ',trim(tnom_0(iq)),', est un fils'
	616	continu=.true.
	617	ipere=1
[3331]	618	do while (continu)
	619	write(lunout,*) 'infotrac 610: ipere,tnom_0(ipere)=',ipere,tnom_0(ipere)
	620	write(lunout,*) 'tnom_transp(iq)=',tnom_transp(iq)
[2270]	621	if (tnom_transp(iq) == tnom_0(ipere)) then
	622	! Son père est ipere
	623	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
	624	& trim(tnom_0(iq)),' est le fils de ',ipere,'appele ',trim(tnom_0(ipere))
[3331]	625	if (iq.eq.ipere) then
	626	CALL abort_gcm('infotrac_init','Un fils est son propre pere',1)
	627	endif
[2270]	628	nqfils(ipere)=nqfils(ipere)+1
	629	iqfils(nqfils(ipere),ipere)=iq
	630	iqpere(iq)=ipere
	631	continu=.false.
	632	else !if (tnom_transp(iq) == tnom_0(ipere)) then
	633	ipere=ipere+1
	634	if (ipere.gt.nqtot) then
	635	WRITE(lunout,*) 'Le traceur',iq,'appele ', &
	636	& trim(tnom_0(iq)),', est orpelin.'
[3331]	637	write(lunout,*) 'ipere,nqtot=',ipere,nqtot
[2270]	638	CALL abort_gcm('infotrac_init','Un traceur est orphelin',1)
	639	endif !if (ipere.gt.nqtot) then
	640	endif !if (tnom_transp(iq) == tnom_0(ipere)) then
	641	enddo !do while (continu)
	642	endif !if (tnom_transp(iq) == 'air') then
	643	enddo !DO iq=1,nqtot
	644	WRITE(lunout,*) 'infotrac: nqperes=',nqperes
	645	WRITE(lunout,*) 'nqfils=',nqfils
	646	WRITE(lunout,*) 'iqpere=',iqpere
	647	WRITE(lunout,*) 'iqfils=',iqfils
	648
	649	! Calculer le nombre de descendants à partir de iqfils et de nbfils
	650	DO iq=1,nqtot
	651	generation=0
	652	continu=.true.
	653	ifils=iq
	654	do while (continu)
	655	ipere=iqpere(ifils)
	656	if (ipere.gt.0) then
	657	nqdesc(ipere)=nqdesc(ipere)+1
	658	nqdesc_tot=nqdesc_tot+1
	659	iqfils(nqdesc(ipere),ipere)=iq
	660	ifils=ipere
	661	generation=generation+1
	662	else !if (ipere.gt.0) then
	663	continu=.false.
	664	endif !if (ipere.gt.0) then
	665	enddo !do while (continu)
	666	WRITE(lunout,*) 'Le traceur ',iq,', appele ',trim(tnom_0(iq)),' est un traceur de generation: ',generation
	667	enddo !DO iq=1,nqtot
	668	WRITE(lunout,*) 'infotrac: nqdesc=',nqdesc
	669	WRITE(lunout,*) 'iqfils=',iqfils
	670	WRITE(lunout,*) 'nqdesc_tot=',nqdesc_tot
	671
	672	! Interdire autres schémas que 10 pour les traceurs fils, et autres schémas
	673	! que 10 et 14 si des pères ont des fils
	674	do iq=1,nqtot
	675	if (iqpere(iq).gt.0) then
	676	! ce traceur a un père qui n'est pas l'air
	677	! Seul le schéma 10 est autorisé
	678	if (iadv(iq)/=10) then
	679	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for sons'
	680	CALL abort_gcm('infotrac_init','Sons should be advected by scheme 10',1)
	681	endif
	682	! Le traceur père ne peut être advecté que par schéma 10 ou 14:
	683	IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	684	WRITE(lunout,*)trim(modname),' STOP : The option iadv=',iadv(iq),' is not implemented for fathers'
	685	CALL abort_gcm('infotrac_init','Fathers should be advected by scheme 10 ou 14',1)
	686	endif !IF (iadv(iqpere(iq))/=10 .AND. iadv(iqpere(iq))/=14) THEN
	687	endif !if (iqpere(iq).gt.0) the
	688	enddo !do iq=1,nqtot
	689
	690
	691	! detecter quels sont les traceurs isotopiques parmi des traceurs
	692	call infotrac_isoinit(tnom_0,nqtrue)
[3331]	693
	694	if (ntraciso.gt.0) then
	695	! retrancher les traceurs isotopiques de la liste des traceurs qui passent dans
	696	! phytrac
	697	nbtr=nbtr-nqo*ntraciso
	698
	699	! faire un tableau d'indice des traceurs qui passeront dans phytrac
	700	nqtottr=nqtot-nqo*(1+ntraciso)
	701	write(,) 'infotrac 704: nqtottr,nqtot,nqo=',nqtottr,nqtot,nqo
	702	! Rq: nqtottr n'est pas forcément égal à nbtr dans le cas où new_iq /= nqtrue
	703	ALLOCATE (itr_indice(nqtot))
	704	itr_indice(:)=0
	705	itr=0
	706	do iq=nqo+1, nqtot
	707	if (iso_num(iq).eq.0) then
	708	itr=itr+1
	709	write(,) 'itr=',itr
	710	itr_indice(itr)=iq
	711	endif !if (iso_num(iq).eq.0) then
	712	enddo
	713	if (itr.ne.nqtottr) then
	714	CALL abort_gcm('infotrac_init','pb dans le calcul de nqtottr',1)
	715	endif
	716	endif !if (ntraciso.gt.0) then
	717
	718	! on déplace les initialisations de REPROBUS ou INCA ici, avec la nouvelle
	719	! valeur de nbtr
	720
	721	if (type_trac == 'inca') then
	722	! nbtr has been read from INCA by init_const_lmdz() in gcm.F
	723	#ifdef INCA
	724	CALL Init_chem_inca_trac(nbtr)
	725	#endif
	726	nqtrue=nbtr+nqo
	727
	728	ALLOCATE(hadv_inca(nbtr), vadv_inca(nbtr))
	729	endif
	730
	731	! Transfert number of tracers to Reprobus
	732	IF (type_trac == 'repr') THEN
	733	#ifdef REPROBUS
	734	CALL Init_chem_rep_trac(nbtr)
	735	#endif
	736	END IF
	737	!
	738	! Allocate variables depending on nbtr
	739	!
	740	ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), solsym(nbtr))
	741	conv_flg(:) = 1 ! convection activated for all tracers
	742	pbl_flg(:) = 1 ! boundary layer activated for all tracers
	743
[2270]	744
[1114]	745	!-----------------------------------------------------------------------
	746	! Finalize :
	747	!
[2270]	748	DEALLOCATE(tnom_0, hadv, vadv,tnom_transp)
[1114]	749
[2180]	750
[1114]	751	END SUBROUTINE infotrac_init
	752
[2270]	753	SUBROUTINE infotrac_isoinit(tnom_0,nqtrue)
	754
	755	#ifdef CPP_IOIPSL
	756	use IOIPSL
	757	#else
	758	! if not using IOIPSL, we still need to use (a local version of) getin
	759	use ioipsl_getincom
	760	#endif
	761	implicit none
	762
	763	! inputs
	764	INTEGER nqtrue
	765	CHARACTER(len=15) tnom_0(nqtrue)
	766
	767	! locals
	768	CHARACTER(len=3), DIMENSION(niso_possibles) :: tnom_iso
	769	INTEGER, ALLOCATABLE,DIMENSION(:,:) :: nb_iso,nb_traciso
	770	INTEGER, ALLOCATABLE,DIMENSION(:) :: nb_isoind
	771	INTEGER :: ntraceurs_zone_prec,iq,phase,ixt,iiso,izone
	772	CHARACTER(len=19) :: tnom_trac
	773	INCLUDE "iniprint.h"
	774
	775	tnom_iso=(/'eau','HDO','O18','O17','HTO'/)
	776
	777	ALLOCATE(nb_iso(niso_possibles,nqo))
	778	ALLOCATE(nb_isoind(nqo))
	779	ALLOCATE(nb_traciso(niso_possibles,nqo))
	780	ALLOCATE(iso_num(nqtot))
	781	ALLOCATE(iso_indnum(nqtot))
	782	ALLOCATE(zone_num(nqtot))
	783	ALLOCATE(phase_num(nqtot))
	784
	785	iso_num(:)=0
	786	iso_indnum(:)=0
	787	zone_num(:)=0
	788	phase_num(:)=0
	789	indnum_fn_num(:)=0
	790	use_iso(:)=.false.
	791	nb_iso(:,:)=0
	792	nb_isoind(:)=0
	793	nb_traciso(:,:)=0
	794	niso=0
	795	ntraceurs_zone=0
	796	ntraceurs_zone_prec=0
	797	ntraciso=0
	798
	799	do iq=nqo+1,nqtot
[3331]	800	write(lunout,*) 'infotrac 569: iq,tnom_0(iq)=',iq,tnom_0(iq)
[2270]	801	do phase=1,nqo
	802	do ixt= 1,niso_possibles
	803	tnom_trac=trim(tnom_0(phase))//'_'
	804	tnom_trac=trim(tnom_trac)//trim(tnom_iso(ixt))
[3331]	805	write(,) 'phase,ixt,tnom_trac=',phase,ixt,tnom_trac
[2270]	806	IF (tnom_0(iq) == tnom_trac) then
[3331]	807	write(lunout,*) 'Ce traceur est un isotope'
[2270]	808	nb_iso(ixt,phase)=nb_iso(ixt,phase)+1
	809	nb_isoind(phase)=nb_isoind(phase)+1
	810	iso_num(iq)=ixt
	811	iso_indnum(iq)=nb_isoind(phase)
	812	indnum_fn_num(ixt)=iso_indnum(iq)
	813	phase_num(iq)=phase
[3331]	814	write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	815	write(lunout,*) 'iso_indnum(iq)=',iso_indnum(iq)
	816	write(lunout,*) 'indnum_fn_num(ixt)=',indnum_fn_num(ixt)
	817	write(lunout,*) 'phase_num(iq)=',phase_num(iq)
[2270]	818	goto 20
	819	else if (iqpere(iq).gt.0) then
	820	if (tnom_0(iqpere(iq)) == tnom_trac) then
[3331]	821	write(lunout,*) 'Ce traceur est le fils d''un isotope'
[2270]	822	! c'est un traceur d'isotope
	823	nb_traciso(ixt,phase)=nb_traciso(ixt,phase)+1
	824	iso_num(iq)=ixt
	825	iso_indnum(iq)=indnum_fn_num(ixt)
	826	zone_num(iq)=nb_traciso(ixt,phase)
	827	phase_num(iq)=phase
[3331]	828	write(lunout,*) 'iso_num(iq)=',iso_num(iq)
	829	write(lunout,*) 'phase_num(iq)=',phase_num(iq)
	830	write(lunout,*) 'zone_num(iq)=',zone_num(iq)
[2270]	831	goto 20
	832	endif !if (tnom_0(iqpere(iq)) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	833	endif !IF (tnom_0(iq) == trim(tnom_0(phase))//trim(tnom_iso(ixt))) then
	834	enddo !do ixt= niso_possibles
	835	enddo !do phase=1,nqo
	836	20 continue
	837	enddo !do iq=1,nqtot
	838
[3331]	839	write(lunout,*) 'iso_num=',iso_num
	840	write(lunout,*) 'iso_indnum=',iso_indnum
	841	write(lunout,*) 'zone_num=',zone_num
	842	write(lunout,*) 'phase_num=',phase_num
	843	write(lunout,*) 'indnum_fn_num=',indnum_fn_num
	844	write(lunout,*) 'nb_iso=',nb_iso
[2270]	845
	846	do ixt= 1,niso_possibles
	847
	848	if (nb_iso(ixt,1).eq.1) then
	849	! on vérifie que toutes les phases ont le même nombre de
	850	! traceurs
	851	do phase=2,nqo
	852	if (nb_iso(ixt,phase).ne.nb_iso(ixt,1)) then
[2372]	853	! write(lunout,*) 'ixt,phase,nb_iso=',ixt,phase,nb_iso(ixt,phase)
[2270]	854	CALL abort_gcm('infotrac_init','Phases must have same number of isotopes',1)
	855	endif
	856	enddo !do phase=2,nqo
	857
	858	niso=niso+1
	859	use_iso(ixt)=.true.
	860	ntraceurs_zone=nb_traciso(ixt,1)
	861
	862	! on vérifie que toutes les phases ont le même nombre de
	863	! traceurs
	864	do phase=2,nqo
	865	if (nb_traciso(ixt,phase).ne.ntraceurs_zone) then
	866	write(lunout,*) 'ixt,phase,nb_traciso=',ixt,phase,nb_traciso(ixt,phase)
	867	write(lunout,*) 'ntraceurs_zone=',ntraceurs_zone
	868	CALL abort_gcm('infotrac_init','Phases must have same number of tracers',1)
	869	endif
	870	enddo !do phase=2,nqo
	871	! on vérifie que tous les isotopes ont le même nombre de
	872	! traceurs
	873	if (ntraceurs_zone_prec.gt.0) then
	874	if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	875	ntraceurs_zone_prec=ntraceurs_zone
	876	else !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	877	write(,) 'ntraceurs_zone_prec,ntraceurs_zone=',ntraceurs_zone_prec,ntraceurs_zone
	878	CALL abort_gcm('infotrac_init', &
	879	&'Isotope tracers are not well defined in traceur.def',1)
	880	endif !if (ntraceurs_zone.eq.ntraceurs_zone_prec) then
	881	endif !if (ntraceurs_zone_prec.gt.0) then
	882
	883	else if (nb_iso(ixt,1).ne.0) then
	884	WRITE(lunout,*) 'nqo,ixt=',nqo,ixt
	885	WRITE(lunout,*) 'nb_iso(ixt,1)=',nb_iso(ixt,1)
	886	CALL abort_gcm('infotrac_init','Isotopes are not well defined in traceur.def',1)
	887	endif !if (nb_iso(ixt,1).eq.1) then
	888	enddo ! do ixt= niso_possibles
	889
	890	! dimensions isotopique:
	891	ntraciso=niso*(ntraceurs_zone+1)
[3331]	892	WRITE(lunout,*) 'niso=',niso
	893	WRITE(lunout,*) 'ntraceurs_zone,ntraciso=',ntraceurs_zone,ntraciso
	894	WRITE(lunout,*) 'use_iso=',use_iso
[2270]	895
	896	! flags isotopiques:
	897	if (niso.gt.0) then
	898	ok_isotopes=.true.
	899	else
	900	ok_isotopes=.false.
	901	endif
[3331]	902	WRITE(lunout,*) 'infotrac 837: ok_isotopes=',ok_isotopes
[2270]	903
	904	if (ok_isotopes) then
	905	ok_iso_verif=.false.
	906	call getin('ok_iso_verif',ok_iso_verif)
	907	ok_init_iso=.false.
	908	call getin('ok_init_iso',ok_init_iso)
	909	tnat=(/1.0,155.76e-6,2005.2e-6,0.004/100.,0.0/)
	910	alpha_ideal=(/1.0,1.01,1.006,1.003,1.0/)
	911	endif !if (ok_isotopes) then
[2372]	912	! WRITE(lunout,*) 'ok_iso_verif=',ok_iso_verif
	913	! WRITE(lunout,*) 'ok_init_iso=',ok_init_iso
[2270]	914
	915	if (ntraceurs_zone.gt.0) then
	916	ok_isotrac=.true.
	917	else
	918	ok_isotrac=.false.
	919	endif
[2372]	920	! WRITE(lunout,*) 'ok_isotrac=',ok_isotrac
[2270]	921
	922	! remplissage du tableau iqiso(ntraciso,phase)
	923	ALLOCATE(iqiso(ntraciso,nqo))
	924	iqiso(:,:)=0
	925	do iq=1,nqtot
	926	if (iso_num(iq).gt.0) then
	927	ixt=iso_indnum(iq)+zone_num(iq)*niso
	928	iqiso(ixt,phase_num(iq))=iq
	929	endif
	930	enddo
[2372]	931	! WRITE(lunout,*) 'iqiso=',iqiso
[2270]	932
	933	! replissage du tableau index_trac(ntraceurs_zone,niso)
	934	ALLOCATE(index_trac(ntraceurs_zone,niso))
	935	if (ok_isotrac) then
	936	do iiso=1,niso
	937	do izone=1,ntraceurs_zone
	938	index_trac(izone,iiso)=iiso+izone*niso
	939	enddo
	940	enddo
	941	else !if (ok_isotrac) then
	942	index_trac(:,:)=0.0
	943	endif !if (ok_isotrac) then
[2372]	944	! write(lunout,*) 'index_trac=',index_trac
[2270]	945
	946	! Finalize :
	947	DEALLOCATE(nb_iso)
	948
	949	END SUBROUTINE infotrac_isoinit
	950
[1114]	951	END MODULE infotrac

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format