source: LMDZ5/branches/AI-cosp/libf/phylmd/cv_driver.F90 @ 5360

Last change on this file since 5360 was 2346, checked in by Ehouarn Millour, 9 years ago

Physics/dynamics separation:

  • remove all references to dimensions.h from physics. nbp_lon (==iim) , nbp_lat (==jjm+1) and nbp_lev (==llm) from mod_grid_phy_lmdz should be used instead.
  • added module regular_lonlat_mod in phy_common to store information about the global (lon-lat) grid cell boundaries and centers.

EM
  • Property copyright set to
    Name of program: LMDZ
    Creation date: 1984
    Version: LMDZ5
    License: CeCILL version 2
    Holder: Laboratoire de m\'et\'eorologie dynamique, CNRS, UMR 8539
    See the license file in the root directory
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 24.9 KB
Line 
1
2! $Header$
3
4SUBROUTINE cv_driver(len, nd, ndp1, ntra, iflag_con, t1, q1, qs1, u1, v1, &
5    tra1, p1, ph1, iflag1, ft1, fq1, fu1, fv1, ftra1, precip1, vprecip1, &
6    cbmf1, sig1, w01, icb1, inb1, delt, ma1, upwd1, dnwd1, dnwd01, qcondc1, &
7    wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1, clw1, elij1, & !
8                                                                        ! RomP
9    evap1, ep1, epmlmmm1, eplamm1, & ! RomP
10    wdtraina1, wdtrainm1) ! RomP
11
12  USE dimphy
13  IMPLICIT NONE
14
15  ! .............................START PROLOGUE............................
16
17
18  ! All argument names (except len,nd,ntra,nloc,delt and the flags) have a
19  ! "1" appended.
20  ! The "1" is removed for the corresponding compressed (local) variables.
21
22  ! PARAMETERS:
23  ! Name            Type         Usage            Description
24  ! ----------      ----------     -------  ----------------------------
25
26  ! len           Integer        Input        first (i) dimension
27  ! nd            Integer        Input        vertical (k) dimension
28  ! ndp1          Integer        Input        nd + 1
29  ! ntra          Integer        Input        number of tracors
30  ! iflag_con     Integer        Input        version of convect (3/4)
31  ! t1            Real           Input        temperature
32  ! q1            Real           Input        specific hum
33  ! qs1           Real           Input        sat specific hum
34  ! u1            Real           Input        u-wind
35  ! v1            Real           Input        v-wind
36  ! tra1          Real           Input        tracors
37  ! p1            Real           Input        full level pressure
38  ! ph1           Real           Input        half level pressure
39  ! iflag1        Integer        Output       flag for Emanuel conditions
40  ! ft1           Real           Output       temp tend
41  ! fq1           Real           Output       spec hum tend
42  ! fu1           Real           Output       u-wind tend
43  ! fv1           Real           Output       v-wind tend
44  ! ftra1         Real           Output       tracor tend
45  ! precip1       Real           Output       precipitation
46  ! VPrecip1      Real           Output       vertical profile of
47  ! precipitations
48  ! cbmf1         Real           Output       cloud base mass flux
49  ! sig1          Real           In/Out       section adiabatic updraft
50  ! w01           Real           In/Out       vertical velocity within adiab
51  ! updraft
52  ! delt          Real           Input        time step
53  ! Ma1           Real           Output       mass flux adiabatic updraft
54  ! upwd1         Real           Output       total upward mass flux
55  ! (adiab+mixed)
56  ! dnwd1         Real           Output       saturated downward mass flux
57  ! (mixed)
58  ! dnwd01        Real           Output       unsaturated downward mass flux
59  ! qcondc1       Real           Output       in-cld mixing ratio of
60  ! condensed water
61  ! wd1           Real           Output       downdraft velocity scale for
62  ! sfc fluxes
63  ! cape1         Real           Output       CAPE
64
65  ! wdtrainA1     Real           Output   precipitation detrained from
66  ! adiabatic draught;
67  ! used in tracer transport (cvltr)
68  ! wdtrainM1     Real           Output   precipitation detrained from mixed
69  ! draughts;
70  ! used in tracer transport (cvltr)
71  ! da1           Real           Output   used in tracer transport (cvltr)
72  ! phi1          Real           Output   used in tracer transport (cvltr)
73  ! mp1           Real           Output   used in tracer transport (cvltr)
74
75  ! phi21         Real           Output   used in tracer transport (cvltr)
76
77  ! d1a1          Real           Output   used in tracer transport (cvltr)
78  ! dam1          Real           Output   used in tracer transport (cvltr)
79
80  ! evap1         Real           Output
81  ! ep1           Real           Output
82  ! sij1        Real           Output
83  ! elij1         Real           Output
84
85  ! S. Bony, Mar 2002:
86  ! * Several modules corresponding to different physical processes
87  ! * Several versions of convect may be used:
88  ! - iflag_con=3: version lmd  (previously named convect3)
89  ! - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
90  ! + tard:     - iflag_con=5: version lmd with ice (previously named convectg)
91  ! S. Bony, Oct 2002:
92  ! * Vectorization of convect3 (ie version lmd)
93
94  ! ..............................END PROLOGUE.............................
95
96
97  ! Input
98  INTEGER len
99  INTEGER nd
100  INTEGER ndp1
101  INTEGER noff
102  INTEGER iflag_con
103  INTEGER ntra
104  REAL delt
105  REAL t1(len, nd)
106  REAL q1(len, nd)
107  REAL qs1(len, nd)
108  REAL u1(len, nd)
109  REAL v1(len, nd)
110  REAL tra1(len, nd, ntra)
111  REAL p1(len, nd)
112  REAL ph1(len, ndp1)
113
114  ! Output
115  INTEGER iflag1(len)
116  REAL ft1(len, nd)
117  REAL fq1(len, nd)
118  REAL fu1(len, nd)
119  REAL fv1(len, nd)
120  REAL ftra1(len, nd, ntra)
121  REAL precip1(len)
122  REAL cbmf1(len)
123  REAL sig1(klon, klev)
124  REAL w01(klon, klev)
125  REAL vprecip1(len, nd+1)
126  REAL evap1(len, nd) !RomP
127  REAL ep1(len, nd) !RomP
128  REAL ma1(len, nd)
129  REAL upwd1(len, nd)
130  REAL dnwd1(len, nd)
131  REAL dnwd01(len, nd)
132
133  REAL qcondc1(len, nd) ! cld
134  REAL wd1(len) ! gust
135  REAL cape1(len)
136
137  ! RomP >>>
138  REAL wdtraina1(len, nd), wdtrainm1(len, nd)
139  REAL sij1(len, nd, nd), elij1(len, nd, nd)
140  REAL da1(len, nd), phi1(len, nd, nd), mp1(len, nd)
141
142  REAL phi21(len, nd, nd)
143  REAL d1a1(len, nd), dam1(len, nd)
144  REAL epmlmmm1(len, nd, nd), eplamm1(len, nd)
145  ! RomP <<<
146
147  ! -------------------------------------------------------------------
148  ! Original Prologue by Kerry Emanuel.
149  ! -------------------------------------------------------------------
150  ! --- ARGUMENTS
151  ! -------------------------------------------------------------------
152  ! --- On input:
153
154  ! t:   Array of absolute temperature (K) of dimension ND, with first
155  ! index corresponding to lowest model level. Note that this array
156  ! will be altered by the subroutine if dry convective adjustment
157  ! occurs and if IPBL is not equal to 0.
158
159  ! q:   Array of specific humidity (gm/gm) of dimension ND, with first
160  ! index corresponding to lowest model level. Must be defined
161  ! at same grid levels as T. Note that this array will be altered
162  ! if dry convective adjustment occurs and if IPBL is not equal to 0.
163
164  ! qs:  Array of saturation specific humidity of dimension ND, with first
165  ! index corresponding to lowest model level. Must be defined
166  ! at same grid levels as T. Note that this array will be altered
167  ! if dry convective adjustment occurs and if IPBL is not equal to 0.
168
169  ! u:   Array of zonal wind velocity (m/s) of dimension ND, witth first
170  ! index corresponding with the lowest model level. Defined at
171  ! same levels as T. Note that this array will be altered if
172  ! dry convective adjustment occurs and if IPBL is not equal to 0.
173
174  ! v:   Same as u but for meridional velocity.
175
176  ! tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
177  ! where NTRA is the number of different tracers. If no
178  ! convective tracer transport is needed, define a dummy
179  ! input array of dimension (ND,1). Tracers are defined at
180  ! same vertical levels as T. Note that this array will be altered
181  ! if dry convective adjustment occurs and if IPBL is not equal to 0.
182
183  ! p:   Array of pressure (mb) of dimension ND, with first
184  ! index corresponding to lowest model level. Must be defined
185  ! at same grid levels as T.
186
187  ! ph:  Array of pressure (mb) of dimension ND+1, with first index
188  ! corresponding to lowest level. These pressures are defined at
189  ! levels intermediate between those of P, T, Q and QS. The first
190  ! value of PH should be greater than (i.e. at a lower level than)
191  ! the first value of the array P.
192
193  ! nl:  The maximum number of levels to which convection can penetrate, plus
194  ! 1.
195  ! NL MUST be less than or equal to ND-1.
196
197  ! delt: The model time step (sec) between calls to CONVECT
198
199  ! ----------------------------------------------------------------------------
200  ! ---   On Output:
201
202  ! iflag: An output integer whose value denotes the following:
203  ! VALUE   INTERPRETATION
204  ! -----   --------------
205  ! 0     Moist convection occurs.
206  ! 1     Moist convection occurs, but a CFL condition
207  ! on the subsidence warming is violated. This
208  ! does not cause the scheme to terminate.
209  ! 2     Moist convection, but no precip because ep(inb) lt 0.0001
210  ! 3     No moist convection because new cbmf is 0 and old cbmf is 0.
211  ! 4     No moist convection; atmosphere is not
212  ! unstable
213  ! 6     No moist convection because ihmin le minorig.
214  ! 7     No moist convection because unreasonable
215  ! parcel level temperature or specific humidity.
216  ! 8     No moist convection: lifted condensation
217  ! level is above the 200 mb level.
218  ! 9     No moist convection: cloud base is higher
219  ! then the level NL-1.
220
221  ! ft:   Array of temperature tendency (K/s) of dimension ND, defined at
222  ! same
223  ! grid levels as T, Q, QS and P.
224
225  ! fq:   Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
226  ! defined at same grid levels as T, Q, QS and P.
227
228  ! fu:   Array of forcing of zonal velocity (m/s^2) of dimension ND,
229  ! defined at same grid levels as T.
230
231  ! fv:   Same as FU, but for forcing of meridional velocity.
232
233  ! ftra: Array of forcing of tracer content, in tracer mixing ratio per
234  ! second, defined at same levels as T. Dimensioned (ND,NTRA).
235
236  ! precip: Scalar convective precipitation rate (mm/day).
237
238  ! VPrecip: Vertical profile of convective precipitation (kg/m2/s).
239
240  ! wd:   A convective downdraft velocity scale. For use in surface
241  ! flux parameterizations. See convect.ps file for details.
242
243  ! tprime: A convective downdraft temperature perturbation scale (K).
244  ! For use in surface flux parameterizations. See convect.ps
245  ! file for details.
246
247  ! qprime: A convective downdraft specific humidity
248  ! perturbation scale (gm/gm).
249  ! For use in surface flux parameterizations. See convect.ps
250  ! file for details.
251
252  ! cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
253  ! BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
254  ! ITS NEXT CALL. That is, the value of CBMF must be "remembered"
255  ! by the calling program between calls to CONVECT.
256
257  ! det:   Array of detrainment mass flux of dimension ND.
258
259  ! -------------------------------------------------------------------
260
261  ! Local arrays
262
263
264  INTEGER i, k, n, il, j
265  INTEGER icbmax
266  INTEGER nk1(klon)
267  INTEGER icb1(klon)
268  INTEGER inb1(klon)
269  INTEGER icbs1(klon)
270
271  REAL plcl1(klon)
272  REAL tnk1(klon)
273  REAL qnk1(klon)
274  REAL gznk1(klon)
275  REAL pnk1(klon)
276  REAL qsnk1(klon)
277  REAL pbase1(klon)
278  REAL buoybase1(klon)
279
280  REAL lv1(klon, klev)
281  REAL cpn1(klon, klev)
282  REAL tv1(klon, klev)
283  REAL gz1(klon, klev)
284  REAL hm1(klon, klev)
285  REAL h1(klon, klev)
286  REAL tp1(klon, klev)
287  REAL tvp1(klon, klev)
288  REAL clw1(klon, klev)
289  REAL th1(klon, klev)
290
291  INTEGER ncum
292
293  ! (local) compressed fields:
294
295  ! ym      integer nloc
296  ! ym      parameter (nloc=klon) ! pour l'instant
297#define nloc klon
298  INTEGER idcum(nloc)
299  INTEGER iflag(nloc), nk(nloc), icb(nloc)
300  INTEGER nent(nloc, klev)
301  INTEGER icbs(nloc)
302  INTEGER inb(nloc), inbis(nloc)
303
304  REAL cbmf(nloc), plcl(nloc), tnk(nloc), qnk(nloc), gznk(nloc)
305  REAL t(nloc, klev), q(nloc, klev), qs(nloc, klev)
306  REAL u(nloc, klev), v(nloc, klev)
307  REAL gz(nloc, klev), h(nloc, klev), lv(nloc, klev), cpn(nloc, klev)
308  REAL p(nloc, klev), ph(nloc, klev+1), tv(nloc, klev), tp(nloc, klev)
309  REAL clw(nloc, klev)
310  REAL dph(nloc, klev)
311  REAL pbase(nloc), buoybase(nloc), th(nloc, klev)
312  REAL tvp(nloc, klev)
313  REAL sig(nloc, klev), w0(nloc, klev)
314  REAL hp(nloc, klev), ep(nloc, klev), sigp(nloc, klev)
315  REAL frac(nloc), buoy(nloc, klev)
316  REAL cape(nloc)
317  REAL m(nloc, klev), ment(nloc, klev, klev), qent(nloc, klev, klev)
318  REAL uent(nloc, klev, klev), vent(nloc, klev, klev)
319  REAL ments(nloc, klev, klev), qents(nloc, klev, klev)
320  REAL sij(nloc, klev, klev), elij(nloc, klev, klev)
321  REAL qp(nloc, klev), up(nloc, klev), vp(nloc, klev)
322  REAL wt(nloc, klev), water(nloc, klev), evap(nloc, klev)
323  REAL b(nloc, klev), ft(nloc, klev), fq(nloc, klev)
324  REAL fu(nloc, klev), fv(nloc, klev)
325  REAL upwd(nloc, klev), dnwd(nloc, klev), dnwd0(nloc, klev)
326  REAL ma(nloc, klev), mike(nloc, klev), tls(nloc, klev)
327  REAL tps(nloc, klev), qprime(nloc), tprime(nloc)
328  REAL precip(nloc)
329  REAL vprecip(nloc, klev+1)
330  REAL tra(nloc, klev, ntra), trap(nloc, klev, ntra)
331  REAL ftra(nloc, klev, ntra), traent(nloc, klev, klev, ntra)
332  REAL qcondc(nloc, klev) ! cld
333  REAL wd(nloc) ! gust
334
335  ! RomP >>>
336  REAL da(nloc, klev), phi(nloc, klev, klev), mp(nloc, klev)
337  REAL epmlmmm(nloc, klev, klev), eplamm(nloc, klev)
338  REAL phi2(nloc, klev, klev)
339  REAL d1a(nloc, klev), dam(nloc, klev)
340  REAL wdtraina(nloc, klev), wdtrainm(nloc, klev)
341  REAL sigd(nloc)
342  ! RomP <<<
343
344  nent(:, :) = 0
345  ! -------------------------------------------------------------------
346  ! --- SET CONSTANTS AND PARAMETERS
347  ! -------------------------------------------------------------------
348  ! print *, '-> cv_driver'      !jyg
349  ! -- set simulation flags:
350  ! (common cvflag)
351
352  CALL cv_flag(0)
353
354  ! -- set thermodynamical constants:
355  ! (common cvthermo)
356
357  CALL cv_thermo(iflag_con)
358
359  ! -- set convect parameters
360
361  ! includes microphysical parameters and parameters that
362  ! control the rate of approach to quasi-equilibrium)
363  ! (common cvparam)
364
365
366  IF (iflag_con==30) THEN
367    CALL cv30_param(nd, delt)
368  END IF
369
370  IF (iflag_con==4) THEN
371    CALL cv_param(nd)
372  END IF
373
374  ! ---------------------------------------------------------------------
375  ! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
376  ! ---------------------------------------------------------------------
377
378  ft1(:, :) = 0.0
379  fq1(:, :) = 0.0
380  fu1(:, :) = 0.0
381  fv1(:, :) = 0.0
382  tvp1(:, :) = 0.0
383  tp1(:, :) = 0.0
384  clw1(:, :) = 0.0
385  ! ym
386  clw(:, :) = 0.0
387  gz1(:, :) = 0.
388  vprecip1(:, :) = 0.
389  ma1(:, :) = 0.0
390  upwd1(:, :) = 0.0
391  dnwd1(:, :) = 0.0
392  dnwd01(:, :) = 0.0
393  qcondc1(:, :) = 0.0
394
395  ftra1(:, :, :) = 0.0
396
397  elij1(:, :, :) = 0.0
398  sij1(:, :, :) = 0.0
399
400  precip1(:) = 0.0
401  iflag1(:) = 0
402  wd1(:) = 0.0
403  cape1(:) = 0.0
404
405  IF (iflag_con==30) THEN
406    DO il = 1, len
407      sig1(il, nd) = sig1(il, nd) + 1.
408      sig1(il, nd) = amin1(sig1(il,nd), 12.1)
409    END DO
410  END IF
411
412  ! RomP >>>
413  wdtraina1(:, :) = 0.
414  wdtrainm1(:, :) = 0.
415  da1(:, :) = 0.
416  phi1(:, :, :) = 0.
417  epmlmmm1(:, :, :) = 0.
418  eplamm1(:, :) = 0.
419  mp1(:, :) = 0.
420  evap1(:, :) = 0.
421  ep1(:, :) = 0.
422  sij1(:, :, :) = 0.
423  elij1(:, :, :) = 0.
424  phi21(:, :, :) = 0.
425  d1a1(:, :) = 0.
426  dam1(:, :) = 0.
427  ! RomP <<<
428
429  ! --------------------------------------------------------------------
430  ! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
431  ! --------------------------------------------------------------------
432
433  IF (iflag_con==30) THEN
434
435    ! print*,'Emanuel version 30 '
436    CALL cv30_prelim(len, nd, ndp1, t1, q1, p1, ph1 & ! nd->na
437      , lv1, cpn1, tv1, gz1, h1, hm1, th1)
438  END IF
439
440  IF (iflag_con==4) THEN
441    CALL cv_prelim(len, nd, ndp1, t1, q1, p1, ph1, lv1, cpn1, tv1, gz1, h1, &
442      hm1)
443  END IF
444
445  ! --------------------------------------------------------------------
446  ! --- CONVECTIVE FEED
447  ! --------------------------------------------------------------------
448
449  IF (iflag_con==30) THEN
450    CALL cv30_feed(len, nd, t1, q1, qs1, p1, ph1, hm1, gz1 & !
451                                                             ! nd->na
452      , nk1, icb1, icbmax, iflag1, tnk1, qnk1, gznk1, plcl1)
453  END IF
454
455  IF (iflag_con==4) THEN
456    CALL cv_feed(len, nd, t1, q1, qs1, p1, hm1, gz1, nk1, icb1, icbmax, &
457      iflag1, tnk1, qnk1, gznk1, plcl1)
458  END IF
459
460  ! --------------------------------------------------------------------
461  ! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
462  ! (up through ICB for convect4, up through ICB+1 for convect3)
463  ! Calculates the lifted parcel virtual temperature at nk, the
464  ! actual temperature, and the adiabatic liquid water content.
465  ! --------------------------------------------------------------------
466
467  IF (iflag_con==30) THEN
468    CALL cv30_undilute1(len, nd, t1, q1, qs1, gz1, plcl1, p1, nk1, icb1 & ! nd->na
469      , tp1, tvp1, clw1, icbs1)
470  END IF
471
472  IF (iflag_con==4) THEN
473    CALL cv_undilute1(len, nd, t1, q1, qs1, gz1, p1, nk1, icb1, icbmax, tp1, &
474      tvp1, clw1)
475  END IF
476
477  ! -------------------------------------------------------------------
478  ! --- TRIGGERING
479  ! -------------------------------------------------------------------
480
481  IF (iflag_con==30) THEN
482    CALL cv30_trigger(len, nd, icb1, plcl1, p1, th1, tv1, tvp1 & !
483                                                                 ! nd->na
484      , pbase1, buoybase1, iflag1, sig1, w01)
485  END IF
486
487  IF (iflag_con==4) THEN
488    CALL cv_trigger(len, nd, icb1, cbmf1, tv1, tvp1, iflag1)
489  END IF
490
491  ! =====================================================================
492  ! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
493  ! =====================================================================
494
495  ncum = 0
496  DO i = 1, len
497    IF (iflag1(i)==0) THEN
498      ncum = ncum + 1
499      idcum(ncum) = i
500    END IF
501  END DO
502
503  ! print*,'cv_driver : klon, ncum = ',len,ncum
504
505  IF (ncum>0) THEN
506
507    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
508    ! --- COMPRESS THE FIELDS
509    ! (-> vectorization over convective gridpoints)
510    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
511
512    IF (iflag_con==30) THEN
513      CALL cv30_compress(len, nloc, ncum, nd, ntra, iflag1, nk1, icb1, icbs1, &
514        plcl1, tnk1, qnk1, gznk1, pbase1, buoybase1, t1, q1, qs1, u1, v1, &
515        gz1, th1, tra1, h1, lv1, cpn1, p1, ph1, tv1, tp1, tvp1, clw1, sig1, &
516        w01, iflag, nk, icb, icbs, plcl, tnk, qnk, gznk, pbase, buoybase, t, &
517        q, qs, u, v, gz, th, tra, h, lv, cpn, p, ph, tv, tp, tvp, clw, sig, &
518        w0)
519    END IF
520
521    IF (iflag_con==4) THEN
522      CALL cv_compress(len, nloc, ncum, nd, iflag1, nk1, icb1, cbmf1, plcl1, &
523        tnk1, qnk1, gznk1, t1, q1, qs1, u1, v1, gz1, h1, lv1, cpn1, p1, ph1, &
524        tv1, tp1, tvp1, clw1, iflag, nk, icb, cbmf, plcl, tnk, qnk, gznk, t, &
525        q, qs, u, v, gz, h, lv, cpn, p, ph, tv, tp, tvp, clw, dph)
526    END IF
527
528    ! -------------------------------------------------------------------
529    ! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
530    ! ---   FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
531    ! ---   &
532    ! ---   COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
533    ! ---   FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
534    ! ---   &
535    ! ---   FIND THE LEVEL OF NEUTRAL BUOYANCY
536    ! -------------------------------------------------------------------
537
538    IF (iflag_con==30) THEN
539      CALL cv30_undilute2(nloc, ncum, nd, icb, icbs, nk & !na->nd
540        , tnk, qnk, gznk, t, q, qs, gz, p, h, tv, lv, pbase, buoybase, plcl, &
541        inb, tp, tvp, clw, hp, ep, sigp, buoy)
542    END IF
543
544    IF (iflag_con==4) THEN
545      CALL cv_undilute2(nloc, ncum, nd, icb, nk, tnk, qnk, gznk, t, q, qs, &
546        gz, p, dph, h, tv, lv, inb, inbis, tp, tvp, clw, hp, ep, sigp, frac)
547    END IF
548
549    ! -------------------------------------------------------------------
550    ! --- CLOSURE
551    ! -------------------------------------------------------------------
552
553    IF (iflag_con==30) THEN
554      CALL cv30_closure(nloc, ncum, nd, icb, inb & ! na->nd
555        , pbase, p, ph, tv, buoy, sig, w0, cape, m)
556    END IF
557
558    IF (iflag_con==4) THEN
559      CALL cv_closure(nloc, ncum, nd, nk, icb, tv, tvp, p, ph, dph, plcl, &
560        cpn, iflag, cbmf)
561    END IF
562
563    ! -------------------------------------------------------------------
564    ! --- MIXING
565    ! -------------------------------------------------------------------
566
567    IF (iflag_con==30) THEN
568      CALL cv30_mixing(nloc, ncum, nd, nd, ntra, icb, nk, inb & !
569                                                                ! na->nd
570        , ph, t, q, qs, u, v, tra, h, lv, qnk, hp, tv, tvp, ep, clw, m, sig, &
571        ment, qent, uent, vent, sij, elij, ments, qents, traent)
572    END IF
573
574    IF (iflag_con==4) THEN
575      CALL cv_mixing(nloc, ncum, nd, icb, nk, inb, inbis, ph, t, q, qs, u, v, &
576        h, lv, qnk, hp, tv, tvp, ep, clw, cbmf, m, ment, qent, uent, vent, &
577        nent, sij, elij)
578    END IF
579
580    ! -------------------------------------------------------------------
581    ! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
582    ! -------------------------------------------------------------------
583
584    IF (iflag_con==30) THEN
585      ! RomP >>>
586      CALL cv30_unsat(nloc, ncum, nd, nd, ntra, icb, inb & ! na->nd
587        , t, q, qs, gz, u, v, tra, p, ph, th, tv, lv, cpn, ep, sigp, clw, m, &
588        ment, elij, delt, plcl, mp, qp, up, vp, trap, wt, water, evap, b, &
589        wdtraina, wdtrainm)
590      ! RomP <<<
591    END IF
592
593    IF (iflag_con==4) THEN
594      CALL cv_unsat(nloc, ncum, nd, inb, t, q, qs, gz, u, v, p, ph, h, lv, &
595        ep, sigp, clw, m, ment, elij, iflag, mp, qp, up, vp, wt, water, evap)
596    END IF
597
598    ! -------------------------------------------------------------------
599    ! --- YIELD
600    ! (tendencies, precipitation, variables of interface with other
601    ! processes, etc)
602    ! -------------------------------------------------------------------
603
604    IF (iflag_con==30) THEN
605      CALL cv30_yield(nloc, ncum, nd, nd, ntra & ! na->nd
606        , icb, inb, delt, t, q, u, v, tra, gz, p, ph, h, hp, lv, cpn, th, ep, &
607        clw, m, tp, mp, qp, up, vp, trap, wt, water, evap, b, ment, qent, &
608        uent, vent, nent, elij, traent, sig, tv, tvp, iflag, precip, vprecip, &
609        ft, fq, fu, fv, ftra, upwd, dnwd, dnwd0, ma, mike, tls, tps, qcondc, &
610        wd)
611    END IF
612
613    IF (iflag_con==4) THEN
614      CALL cv_yield(nloc, ncum, nd, nk, icb, inb, delt, t, q, u, v, gz, p, &
615        ph, h, hp, lv, cpn, ep, clw, frac, m, mp, qp, up, vp, wt, water, &
616        evap, ment, qent, uent, vent, nent, elij, tv, tvp, iflag, wd, qprime, &
617        tprime, precip, cbmf, ft, fq, fu, fv, ma, qcondc)
618    END IF
619
620    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
621    ! --- passive tracers
622    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
623
624    IF (iflag_con==30) THEN
625      ! RomP >>>
626      CALL cv30_tracer(nloc, len, ncum, nd, nd, ment, sij, da, phi, phi2, &
627        d1a, dam, ep, vprecip, elij, clw, epmlmmm, eplamm, icb, inb)
628      ! RomP <<<
629    END IF
630
631    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
632    ! --- UNCOMPRESS THE FIELDS
633    ! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
634    ! set iflag1 =42 for non convective points
635    DO i = 1, len
636      iflag1(i) = 42
637    END DO
638
639    IF (iflag_con==30) THEN
640      CALL cv30_uncompress(nloc, len, ncum, nd, ntra, idcum, iflag, precip, &
641        vprecip, evap, ep, sig, w0 & !RomP
642        , ft, fq, fu, fv, ftra, inb, ma, upwd, dnwd, dnwd0, qcondc, wd, cape, &
643        da, phi, mp, phi2, d1a, dam, sij & !RomP
644        , elij, clw, epmlmmm, eplamm & !RomP
645        , wdtraina, wdtrainm &     !RomP
646        , iflag1, precip1, vprecip1, evap1, ep1, sig1, w01 & !RomP
647        , ft1, fq1, fu1, fv1, ftra1, inb1, ma1, upwd1, dnwd1, dnwd01, &
648        qcondc1, wd1, cape1, da1, phi1, mp1, phi21, d1a1, dam1, sij1 & !RomP
649        , elij1, clw1, epmlmmm1, eplamm1 & !RomP
650        , wdtraina1, wdtrainm1) !RomP
651    END IF
652
653    IF (iflag_con==4) THEN
654      CALL cv_uncompress(nloc, len, ncum, nd, idcum, iflag, precip, cbmf, ft, &
655        fq, fu, fv, ma, qcondc, iflag1, precip1, cbmf1, ft1, fq1, fu1, fv1, &
656        ma1, qcondc1)
657    END IF
658
659  END IF ! ncum>0
660
661  ! print *, 'fin cv_driver ->'      !jyg
662  RETURN
663END SUBROUTINE cv_driver
664
665! ==================================================================
666SUBROUTINE cv_flag(iflag_ice_thermo)
667  IMPLICIT NONE
668
669  ! Argument : iflag_ice_thermo : ice thermodynamics is taken into account if
670  ! iflag_ice_thermo >=1
671  INTEGER iflag_ice_thermo
672
673  include "cvflag.h"
674
675  ! -- si .TRUE., on rend la gravite plus explicite et eventuellement
676  ! differente de 10.0 dans convect3:
677  cvflag_grav = .TRUE.
678  cvflag_ice = iflag_ice_thermo >= 1
679
680  RETURN
681END SUBROUTINE cv_flag
682
683! ==================================================================
684SUBROUTINE cv_thermo(iflag_con)
685  IMPLICIT NONE
686
687  ! -------------------------------------------------------------
688  ! Set thermodynamical constants for convectL
689  ! -------------------------------------------------------------
690
691  include "YOMCST.h"
692  include "cvthermo.h"
693
694  INTEGER iflag_con
695
696
697  ! original set from convect:
698  IF (iflag_con==4) THEN
699    cpd = 1005.7
700    cpv = 1870.0
701    cl = 4190.0
702    rrv = 461.5
703    rrd = 287.04
704    lv0 = 2.501E6
705    g = 9.8
706    t0 = 273.15
707    grav = g
708  ELSE
709
710    ! constants consistent with LMDZ:
711    cpd = rcpd
712    cpv = rcpv
713    cl = rcw
714    ci = rcs
715    rrv = rv
716    rrd = rd
717    lv0 = rlvtt
718    lf0 = rlstt - rlvtt
719    g = rg ! not used in convect3
720    ! ori      t0  = RTT
721    t0 = 273.15 ! convect3 (RTT=273.16)
722    ! maf       grav= 10.    ! implicitely or explicitely used in convect3
723    grav = g ! implicitely or explicitely used in convect3
724  END IF
725
726  rowl = 1000.0 !(a quelle variable de YOMCST cela correspond-il?)
727
728  clmcpv = cl - cpv
729  clmcpd = cl - cpd
730  clmci = cl - ci
731  cpdmcp = cpd - cpv
732  cpvmcpd = cpv - cpd
733  cpvmcl = cl - cpv ! for convect3
734  eps = rrd/rrv
735  epsi = 1.0/eps
736  epsim1 = epsi - 1.0
737  ! ginv=1.0/g
738  ginv = 1.0/grav
739  hrd = 0.5*rrd
740
741  RETURN
742END SUBROUTINE cv_thermo
Note: See TracBrowser for help on using the repository browser.