Context Navigation

guide_p_mod.F90 @ 1403

Last change on this file since 1403 was 1403, checked in by Laurent Fairhead, 14 years ago

Merged LMDZ4V5.0-dev branch changes r1292:r1399 to trunk.

Validation:
Validation consisted in compiling the HEAD revision of the trunk,
LMDZ4V5.0-dev branch and the merged sources and running different
configurations on local and SX8 machines comparing results.

Local machine: bench configuration, 32x24x11, gfortran

IPSLCM5A configuration (comparison between trunk and merged sources):
- numerical convergence on dynamical fields over 3 days
- start files are equivalent (except for RN and PB fields)
- daily history files equivalent

MH07 configuration, new physics package (comparison between LMDZ4V5.0-dev branch and merged sources):
- numerical convergence on dynamical fields over 3 days
- start files are equivalent (except for RN and PB fields)
- daily history files equivalent

SX8 machine (brodie), 96x95x39 on 4 processors:

IPSLCM5A configuration:
- start files are equivalent (except for RN and PB fields)
- monthly history files equivalent

MH07 configuration:
- start files are equivalent (except for RN and PB fields)
- monthly history files equivalent

Changes to the makegcm and create_make_gcm scripts to take into account
main programs in F90 files

Fusion de la branche LMDZ4V5.0-dev (r1292:r1399) au tronc principal

Validation:
La validation a consisté à compiler la HEAD de le trunk et de la banche
LMDZ4V5.0-dev et les sources fusionnées et de faire tourner le modéle selon
différentes configurations en local et sur SX8 et de comparer les résultats

En local: 32x24x11, config bench/gfortran

pour une config IPSLCM5A (comparaison tronc/fusion):
- convergence numérique sur les champs dynamiques après 3 jours
- restart et restartphy égaux (à part sur RN et Pb)
- fichiers histoire égaux

pour une config nlle physique (MH07) (comparaison LMDZ4v5.0-dev/fusion):
- convergence numérique sur les champs dynamiques après 3 jours
- restart et restartphy égaux
- fichiers histoire équivalents

Sur brodie, 96x95x39 sur 4 proc:

pour une config IPSLCM5A:
- restart et restartphy égaux (à part sur RN et PB)
- pas de différence dans les fichiers histmth.nc

pour une config MH07
- restart et restartphy égaux (à part sur RN et PB)
- pas de différence dans les fichiers histmth.nc

Changement sur makegcm et create_make-gcm pour pouvoir prendre en compte des
programmes principaux en *F90

Property svn:executable set to *

File size: 55.9 KB

Line
1	!
2	! $Id$
3	!
4	MODULE guide_p_mod
5
6	!=======================================================================
7	! Auteur: F.Hourdin
8	! F. Codron 01/09
9	!=======================================================================
10
11	USE getparam
12	USE Write_Field_p
13	use netcdf, only: nf90_nowrite, nf90_open, nf90_inq_varid, nf90_close
14
15	IMPLICIT NONE
16
17	! ---------------------------------------------
18	! Declarations des cles logiques et parametres
19	! ---------------------------------------------
20	INTEGER, PRIVATE, SAVE :: iguide_read,iguide_int,iguide_sav
21	INTEGER, PRIVATE, SAVE :: nlevnc
22	LOGICAL, PRIVATE, SAVE :: guide_u,guide_v,guide_T,guide_Q,guide_P
23	LOGICAL, PRIVATE, SAVE :: guide_hr,guide_teta
24	LOGICAL, PRIVATE, SAVE :: guide_BL,guide_reg,guide_add,gamma4,guide_zon
25	LOGICAL, PRIVATE, SAVE :: guide_modele,invert_p,invert_y,ini_anal
26	LOGICAL, PRIVATE, SAVE :: guide_2D,guide_sav
27
28	REAL, PRIVATE, SAVE :: tau_min_u,tau_max_u
29	REAL, PRIVATE, SAVE :: tau_min_v,tau_max_v
30	REAL, PRIVATE, SAVE :: tau_min_T,tau_max_T
31	REAL, PRIVATE, SAVE :: tau_min_Q,tau_max_Q
32	REAL, PRIVATE, SAVE :: tau_min_P,tau_max_P
33
34	REAL, PRIVATE, SAVE :: lat_min_g,lat_max_g
35	REAL, PRIVATE, SAVE :: lon_min_g,lon_max_g
36	REAL, PRIVATE, SAVE :: tau_lon,tau_lat
37
38	REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: alpha_u,alpha_v
39	REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: alpha_T,alpha_Q
40	REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: alpha_P,alpha_pcor
41
42	! ---------------------------------------------
43	! Variables de guidage
44	! ---------------------------------------------
45	! Variables des fichiers de guidage
46	REAL, ALLOCATABLE, DIMENSION(:,:,:), PRIVATE, SAVE :: unat1,unat2
47	REAL, ALLOCATABLE, DIMENSION(:,:,:), PRIVATE, SAVE :: vnat1,vnat2
48	REAL, ALLOCATABLE, DIMENSION(:,:,:), PRIVATE, SAVE :: tnat1,tnat2
49	REAL, ALLOCATABLE, DIMENSION(:,:,:), PRIVATE, SAVE :: qnat1,qnat2
50	REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: psnat1,psnat2
51	REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: apnc,bpnc
52	! Variables aux dimensions du modele
53	REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: ugui1,ugui2
54	REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: vgui1,vgui2
55	REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: tgui1,tgui2
56	REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: qgui1,qgui2
57	REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: psgui1,psgui2
58
59	INTEGER,SAVE,PRIVATE :: ijb_u,ijb_v,ije_u,ije_v,ijn_u,ijn_v
60	INTEGER,SAVE,PRIVATE :: jjb_u,jjb_v,jje_u,jje_v,jjn_u,jjn_v
61
62
63	CONTAINS
64	!=======================================================================
65
66	SUBROUTINE guide_init
67
68	USE control_mod
69	IMPLICIT NONE
70
71	INCLUDE "dimensions.h"
72	INCLUDE "paramet.h"
73	INCLUDE "netcdf.inc"
74
75	INTEGER :: error,ncidpl,rid,rcod
76	CHARACTER (len = 80) :: abort_message
77	CHARACTER (len = 20) :: modname = 'guide_init'
78
79	! ---------------------------------------------
80	! Lecture des parametres:
81	! ---------------------------------------------
82	! Variables guidees
83	CALL getpar('guide_u',.true.,guide_u,'guidage de u')
84	CALL getpar('guide_v',.true.,guide_v,'guidage de v')
85	CALL getpar('guide_T',.true.,guide_T,'guidage de T')
86	CALL getpar('guide_P',.true.,guide_P,'guidage de P')
87	CALL getpar('guide_Q',.true.,guide_Q,'guidage de Q')
88	CALL getpar('guide_hr',.true.,guide_hr,'guidage de Q par H.R')
89	CALL getpar('guide_teta',.false.,guide_teta,'guidage de T par Teta')
90
91	CALL getpar('guide_add',.false.,guide_add,'for�age constant?')
92	CALL getpar('guide_zon',.false.,guide_zon,'guidage moy zonale')
93
94	! Constantes de rappel. Unite : fraction de jour
95	CALL getpar('tau_min_u',0.02,tau_min_u,'Cste de rappel min, u')
96	CALL getpar('tau_max_u', 10.,tau_max_u,'Cste de rappel max, u')
97	CALL getpar('tau_min_v',0.02,tau_min_v,'Cste de rappel min, v')
98	CALL getpar('tau_max_v', 10.,tau_max_v,'Cste de rappel max, v')
99	CALL getpar('tau_min_T',0.02,tau_min_T,'Cste de rappel min, T')
100	CALL getpar('tau_max_T', 10.,tau_max_T,'Cste de rappel max, T')
101	CALL getpar('tau_min_Q',0.02,tau_min_Q,'Cste de rappel min, Q')
102	CALL getpar('tau_max_Q', 10.,tau_max_Q,'Cste de rappel max, Q')
103	CALL getpar('tau_min_P',0.02,tau_min_P,'Cste de rappel min, P')
104	CALL getpar('tau_max_P', 10.,tau_max_P,'Cste de rappel max, P')
105	CALL getpar('gamma4',.false.,gamma4,'Zone sans rappel elargie')
106	CALL getpar('guide_BL',.true.,guide_BL,'guidage dans C.Lim')
107
108	! Sauvegarde du for�age
109	CALL getpar('guide_sav',.false.,guide_sav,'sauvegarde guidage')
110	CALL getpar('iguide_sav',4,iguide_sav,'freq. sauvegarde guidage')
111	! frequences f>0: fx/jour; f<0: tous les f jours; f=0: 1 seule fois.
112	IF (iguide_sav.GT.0) THEN
113	iguide_sav=day_step/iguide_sav
114	ELSE
115	iguide_sav=day_step*iguide_sav
116	ENDIF
117
118	! Guidage regional seulement (sinon constant ou suivant le zoom)
119	CALL getpar('guide_reg',.false.,guide_reg,'guidage regional')
120	CALL getpar('lat_min_g',-90.,lat_min_g,'Latitude mini guidage ')
121	CALL getpar('lat_max_g', 90.,lat_max_g,'Latitude maxi guidage ')
122	CALL getpar('lon_min_g',-180.,lon_min_g,'longitude mini guidage ')
123	CALL getpar('lon_max_g', 180.,lon_max_g,'longitude maxi guidage ')
124	CALL getpar('tau_lat', 5.,tau_lat,'raideur lat guide regional ')
125	CALL getpar('tau_lon', 5.,tau_lon,'raideur lon guide regional ')
126
127	! Parametres pour lecture des fichiers
128	CALL getpar('iguide_read',4,iguide_read,'freq. lecture guidage')
129	CALL getpar('iguide_int',4,iguide_int,'freq. lecture guidage')
130	IF (iguide_int.GT.0) THEN
131	iguide_int=day_step/iguide_int
132	ELSE
133	iguide_int=day_step*iguide_int
134	ENDIF
135	CALL getpar('guide_modele',.false.,guide_modele,'guidage niveaux modele')
136	CALL getpar('ini_anal',.false.,ini_anal,'Etat initial = analyse')
137	CALL getpar('guide_invertp',.true.,invert_p,'niveaux p inverses')
138	CALL getpar('guide_inverty',.true.,invert_y,'inversion N-S')
139	CALL getpar('guide_2D',.false.,guide_2D,'fichier guidage lat-P')
140
141	! ---------------------------------------------
142	! Determination du nombre de niveaux verticaux
143	! des fichiers guidage
144	! ---------------------------------------------
145	ncidpl=-99
146	if (guide_modele) then
147	if (ncidpl.eq.-99) rcod=nf90_open('apbp.nc',Nf90_NOWRITe, ncidpl)
148	else
149	if (guide_u) then
150	if (ncidpl.eq.-99) rcod=nf90_open('u.nc',Nf90_NOWRITe,ncidpl)
151	elseif (guide_v) then
152	if (ncidpl.eq.-99) rcod=nf90_open('v.nc',nf90_nowrite,ncidpl)
153	elseif (guide_T) then
154	if (ncidpl.eq.-99) rcod=nf90_open('T.nc',nf90_nowrite,ncidpl)
155	elseif (guide_Q) then
156	if (ncidpl.eq.-99) rcod=nf90_open('hur.nc',nf90_nowrite, ncidpl)
157	endif
158	endif
159	error=NF_INQ_DIMID(ncidpl,'LEVEL',rid)
160	IF (error.NE.NF_NOERR) error=NF_INQ_DIMID(ncidpl,'PRESSURE',rid)
161	IF (error.NE.NF_NOERR) THEN
162	print *,'Guide: probleme lecture niveaux pression'
163	CALL abort_gcm(modname,abort_message,1)
164	ENDIF
165	error=NF_INQ_DIMLEN(ncidpl,rid,nlevnc)
166	print *,'Guide: nombre niveaux vert. nlevnc', nlevnc
167	rcod = nf90_close(ncidpl)
168
169	! ---------------------------------------------
170	! Allocation des variables
171	! ---------------------------------------------
172	abort_message='pb in allocation guide'
173
174	ALLOCATE(apnc(nlevnc), stat = error)
175	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
176	ALLOCATE(bpnc(nlevnc), stat = error)
177	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
178	apnc=0.;bpnc=0.
179
180	ALLOCATE(alpha_pcor(llm), stat = error)
181	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
182	ALLOCATE(alpha_u(ip1jmp1), stat = error)
183	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
184	ALLOCATE(alpha_v(ip1jm), stat = error)
185	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
186	ALLOCATE(alpha_T(ip1jmp1), stat = error)
187	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
188	ALLOCATE(alpha_Q(ip1jmp1), stat = error)
189	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
190	ALLOCATE(alpha_P(ip1jmp1), stat = error)
191	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
192	alpha_u=0.;alpha_v=0;alpha_T=0;alpha_Q=0;alpha_P=0
193
194	IF (guide_u) THEN
195	ALLOCATE(unat1(iip1,jjp1,nlevnc), stat = error)
196	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
197	ALLOCATE(ugui1(ip1jmp1,llm), stat = error)
198	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
199	ALLOCATE(unat2(iip1,jjp1,nlevnc), stat = error)
200	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
201	ALLOCATE(ugui2(ip1jmp1,llm), stat = error)
202	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
203	unat1=0.;unat2=0.;ugui1=0.;ugui2=0.
204	ENDIF
205
206	IF (guide_T) THEN
207	ALLOCATE(tnat1(iip1,jjp1,nlevnc), stat = error)
208	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
209	ALLOCATE(tgui1(ip1jmp1,llm), stat = error)
210	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
211	ALLOCATE(tnat2(iip1,jjp1,nlevnc), stat = error)
212	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
213	ALLOCATE(tgui2(ip1jmp1,llm), stat = error)
214	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
215	tnat1=0.;tnat2=0.;tgui1=0.;tgui2=0.
216	ENDIF
217
218	IF (guide_Q) THEN
219	ALLOCATE(qnat1(iip1,jjp1,nlevnc), stat = error)
220	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
221	ALLOCATE(qgui1(ip1jmp1,llm), stat = error)
222	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
223	ALLOCATE(qnat2(iip1,jjp1,nlevnc), stat = error)
224	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
225	ALLOCATE(qgui2(ip1jmp1,llm), stat = error)
226	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
227	qnat1=0.;qnat2=0.;qgui1=0.;qgui2=0.
228	ENDIF
229
230	IF (guide_v) THEN
231	ALLOCATE(vnat1(iip1,jjm,nlevnc), stat = error)
232	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
233	ALLOCATE(vgui1(ip1jm,llm), stat = error)
234	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
235	ALLOCATE(vnat2(iip1,jjm,nlevnc), stat = error)
236	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
237	ALLOCATE(vgui2(ip1jm,llm), stat = error)
238	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
239	vnat1=0.;vnat2=0.;vgui1=0.;vgui2=0.
240	ENDIF
241
242	IF (guide_P.OR.guide_modele) THEN
243	ALLOCATE(psnat1(iip1,jjp1), stat = error)
244	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
245	ALLOCATE(psnat2(iip1,jjp1), stat = error)
246	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
247	psnat1=0.;psnat2=0.;
248	ENDIF
249	IF (guide_P) THEN
250	ALLOCATE(psgui2(ip1jmp1), stat = error)
251	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
252	ALLOCATE(psgui1(ip1jmp1), stat = error)
253	IF (error /= 0) CALL abort_gcm(modname,abort_message,1)
254	psgui1=0.;psgui2=0.
255	ENDIF
256
257	! ---------------------------------------------
258	! Lecture du premier etat de guidage.
259	! ---------------------------------------------
260	IF (guide_2D) THEN
261	CALL guide_read2D(1)
262	ELSE
263	CALL guide_read(1)
264	ENDIF
265	IF (guide_v) vnat1=vnat2
266	IF (guide_u) unat1=unat2
267	IF (guide_T) tnat1=tnat2
268	IF (guide_Q) qnat1=qnat2
269	IF (guide_P.OR.guide_modele) psnat1=psnat2
270
271	END SUBROUTINE guide_init
272
273	!=======================================================================
274	SUBROUTINE guide_main(itau,ucov,vcov,teta,q,masse,ps)
275	use parallel
276	USE control_mod
277
278	IMPLICIT NONE
279
280	INCLUDE "dimensions.h"
281	INCLUDE "paramet.h"
282	INCLUDE "comconst.h"
283	INCLUDE "comvert.h"
284
285	! Variables entree
286	INTEGER, INTENT(IN) :: itau !pas de temps
287	REAL, DIMENSION (ip1jmp1,llm), INTENT(INOUT) :: ucov,teta,q,masse
288	REAL, DIMENSION (ip1jm,llm), INTENT(INOUT) :: vcov
289	REAL, DIMENSION (ip1jmp1), INTENT(INOUT) :: ps
290
291	! Variables locales
292	LOGICAL, SAVE :: first=.TRUE.
293	LOGICAL :: f_out ! sortie guidage
294	REAL, DIMENSION (ip1jmp1,llm) :: f_add ! var aux: champ de guidage
295	REAL, DIMENSION (ip1jmp1,llm) :: p ! besoin si guide_P
296	! Compteurs temps:
297	INTEGER, SAVE :: step_rea,count_no_rea,itau_test ! lecture guidage
298	REAL :: ditau, dday_step
299	REAL :: tau,reste ! position entre 2 etats de guidage
300	REAL, SAVE :: factt ! pas de temps en fraction de jour
301
302	INTEGER :: l
303
304	ijb_u=ij_begin ; ije_u=ij_end ; ijn_u=ije_u-ijb_u+1
305	jjb_u=jj_begin ; jje_u=jj_end ; jjn_u=jje_u-jjb_u+1
306	ijb_v=ij_begin ; ije_v=ij_end ; ijn_v=ije_v-ijb_v+1
307	jjb_v=jj_begin ; jje_v=jj_end ; jjn_v=jje_v-jjb_v+1
308	IF (pole_sud) THEN
309	ije_v=ij_end-iip1
310	jje_v=jj_end-1
311	ijn_v=ije_v-ijb_v+1
312	jjn_v=jje_v-jjb_v+1
313	ENDIF
314
315
316
317	PRINT *,'---> on rentre dans guide_main'
318	! CALL AllGather_Field(ucov,ip1jmp1,llm)
319	! CALL AllGather_Field(vcov,ip1jm,llm)
320	! CALL AllGather_Field(teta,ip1jmp1,llm)
321	! CALL AllGather_Field(ps,ip1jmp1,1)
322	! CALL AllGather_Field(q,ip1jmp1,llm)
323
324	!-----------------------------------------------------------------------
325	! Initialisations au premier passage
326	!-----------------------------------------------------------------------
327
328	IF (first) THEN
329	first=.FALSE.
330	CALL guide_init
331	itau_test=1001
332	step_rea=1
333	count_no_rea=0
334	! Calcul des constantes de rappel
335	factt=dtvr*iperiod/daysec
336	call tau2alpha(3,iip1,jjm ,factt,tau_min_v,tau_max_v,alpha_v)
337	call tau2alpha(2,iip1,jjp1,factt,tau_min_u,tau_max_u,alpha_u)
338	call tau2alpha(1,iip1,jjp1,factt,tau_min_T,tau_max_T,alpha_T)
339	call tau2alpha(1,iip1,jjp1,factt,tau_min_P,tau_max_P,alpha_P)
340	call tau2alpha(1,iip1,jjp1,factt,tau_min_Q,tau_max_Q,alpha_Q)
341	! correction de rappel dans couche limite
342	if (guide_BL) then
343	alpha_pcor(:)=1.
344	else
345	do l=1,llm
346	alpha_pcor(l)=(1.+tanh((0.85-presnivs(l)/preff)/0.05))/2.
347	enddo
348	endif
349	! ini_anal: etat initial egal au guidage
350	IF (ini_anal) THEN
351	CALL guide_interp(ps,teta)
352	IF (guide_u) ucov(ijb_u:ije_u,:)=ugui2(ijb_u:ije_u,:)
353	IF (guide_v) vcov(ijb_v:ije_v,:)=ugui2(ijb_v:ije_v,:)
354	IF (guide_T) teta(ijb_u:ije_u,:)=tgui2(ijb_u:ije_u,:)
355	IF (guide_Q) q(ijb_u:ije_u,:)=qgui2(ijb_u:ije_u,:)
356	IF (guide_P) THEN
357	ps(ijb_u:ije_u)=psgui2(ijb_u:ije_u)
358	CALL pression_p(ip1jmp1,ap,bp,ps,p)
359	CALL massdair_p(p,masse)
360	ENDIF
361	RETURN
362	ENDIF
363	! Verification structure guidage
364	IF (guide_u) THEN
365	CALL writefield_p('unat',unat1)
366	CALL writefield_p('ucov',RESHAPE(ucov,(/iip1,jjp1,llm/)))
367	ENDIF
368	IF (guide_T) THEN
369	CALL writefield_p('tnat',tnat1)
370	CALL writefield_p('teta',RESHAPE(teta,(/iip1,jjp1,llm/)))
371	ENDIF
372
373	ENDIF !first
374
375	!-----------------------------------------------------------------------
376	! Lecture des fichiers de guidage ?
377	!-----------------------------------------------------------------------
378	IF (iguide_read.NE.0) THEN
379	ditau=real(itau)
380	dday_step=real(day_step)
381	IF (iguide_read.LT.0) THEN
382	tau=ditau/dday_step/ REAL(iguide_read)
383	ELSE
384	tau= REAL(iguide_read)*ditau/dday_step
385	ENDIF
386	reste=tau-AINT(tau)
387	IF (reste.EQ.0.) THEN
388	IF (itau_test.EQ.itau) THEN
389	write(,)'deuxieme passage de advreel a itau=',itau
390	stop
391	ELSE
392	IF (guide_v) vnat1(jjb_v:jje_v,:,:)=vnat2(jjb_v:jje_v,:,:)
393	IF (guide_u) unat1(jjb_u:jje_u,:,:)=unat2(jjb_u:jje_u,:,:)
394	IF (guide_T) tnat1(jjb_u:jje_u,:,:)=tnat2(jjb_u:jje_u,:,:)
395	IF (guide_Q) qnat1(jjb_u:jje_u,:,:)=qnat2(jjb_u:jje_u,:,:)
396	IF (guide_P.OR.guide_modele) psnat1(jjb_u:jje_u,:)=psnat2(jjb_u:jje_u,:)
397	step_rea=step_rea+1
398	itau_test=itau
399	print*,'Lecture fichiers guidage, pas ',step_rea, &
400	'apres ',count_no_rea,' non lectures'
401	IF (guide_2D) THEN
402	CALL guide_read2D(step_rea)
403	ELSE
404	CALL guide_read(step_rea)
405	ENDIF
406	count_no_rea=0
407	ENDIF
408	ELSE
409	count_no_rea=count_no_rea+1
410
411	ENDIF
412	ENDIF !iguide_read=0
413
414	!-----------------------------------------------------------------------
415	! Interpolation et conversion des champs de guidage
416	!-----------------------------------------------------------------------
417	IF (MOD(itau,iguide_int).EQ.0) THEN
418	CALL guide_interp(ps,teta)
419	ENDIF
420	! Repartition entre 2 etats de guidage
421	IF (iguide_read.NE.0) THEN
422	tau=reste
423	ELSE
424	tau=1.
425	ENDIF
426
427	!-----------------------------------------------------------------------
428	! Ajout des champs de guidage
429	!-----------------------------------------------------------------------
430	! Sauvegarde du guidage?
431	f_out=((MOD(itau,iguide_sav).EQ.0).AND.guide_sav)
432	IF (f_out) CALL guide_out("S",jjp1,1,ps)
433
434	if (guide_u) then
435	if (guide_add) then
436	f_add(ijb_u:ije_u,:)=(1.-tau)ugui1(ijb_u:ije_u,:)+tauugui2(ijb_u:ije_u,:)
437	else
438	f_add(ijb_u:ije_u,:)=(1.-tau)ugui1(ijb_u:ije_u,:)+tauugui2(ijb_u:ije_u,:)-ucov(ijb_u:ije_u,:)
439	endif
440
441	if (guide_zon) CALL guide_zonave(1,jjp1,llm,f_add)
442	CALL guide_addfield(ip1jmp1,llm,f_add,alpha_u)
443	IF (f_out) CALL guide_out("U",jjp1,llm,f_add/factt)
444	ucov(ijb_u:ije_u,:)=ucov(ijb_u:ije_u,:)+f_add(ijb_u:ije_u,:)
445	endif
446
447	if (guide_T) then
448	if (guide_add) then
449	f_add(ijb_u:ije_u,:)=(1.-tau)tgui1(ijb_u:ije_u,:)+tautgui2(ijb_u:ije_u,:)
450	else
451	f_add(ijb_u:ije_u,:)=(1.-tau)tgui1(ijb_u:ije_u,:)+tautgui2(ijb_u:ije_u,:)-teta(ijb_u:ije_u,:)
452	endif
453	if (guide_zon) CALL guide_zonave(2,jjp1,llm,f_add)
454	CALL guide_addfield(ip1jmp1,llm,f_add,alpha_T)
455	IF (f_out) CALL guide_out("T",jjp1,llm,f_add/factt)
456	teta(ijb_u:ije_u,:)=teta(ijb_u:ije_u,:)+f_add(ijb_u:ije_u,:)
457	endif
458
459	if (guide_P) then
460	if (guide_add) then
461	f_add(ijb_u:ije_u,1)=(1.-tau)psgui1(ijb_u:ije_u)+taupsgui2(ijb_u:ije_u)
462	else
463	f_add(ijb_u:ije_u,1)=(1.-tau)psgui1(ijb_u:ije_u)+taupsgui2(ijb_u:ije_u)-ps(ijb_u:ije_u)
464	endif
465	if (guide_zon) CALL guide_zonave(2,jjp1,1,f_add(1:ip1jmp1,1))
466	CALL guide_addfield(ip1jmp1,1,f_add(1:ip1jmp1,1),alpha_P)
467	IF (f_out) CALL guide_out("P",jjp1,1,f_add(1:ip1jmp1,1)/factt)
468	ps(ijb_u:ije_u)=ps(ijb_u:ije_u)+f_add(ijb_u:ije_u,1)
469	CALL pression_p(ip1jmp1,ap,bp,ps,p)
470	CALL massdair_p(p,masse)
471	endif
472
473	if (guide_Q) then
474	if (guide_add) then
475	f_add(ijb_u:ije_u,:)=(1.-tau)qgui1(ijb_u:ije_u,:)+tauqgui2(ijb_u:ije_u,:)
476	else
477	f_add(ijb_u:ije_u,:)=(1.-tau)qgui1(ijb_u:ije_u,:)+tauqgui2(ijb_u:ije_u,:)-q(ijb_u:ije_u,:)
478	endif
479	if (guide_zon) CALL guide_zonave(2,jjp1,llm,f_add)
480	CALL guide_addfield(ip1jmp1,llm,f_add,alpha_Q)
481	IF (f_out) CALL guide_out("Q",jjp1,llm,f_add/factt)
482	q(ijb_u:ije_u,:)=q(ijb_u:ije_u,:)+f_add(ijb_u:ije_u,:)
483	endif
484
485	if (guide_v) then
486	if (guide_add) then
487	f_add(ijb_v:ije_v,:)=(1.-tau)vgui1(ijb_v:ije_v,:)+tauvgui2(ijb_v:ije_v,:)
488	else
489	f_add(ijb_v:ije_v,:)=(1.-tau)vgui1(ijb_v:ije_v,:)+tauvgui2(ijb_v:ije_v,:)-vcov(ijb_v:ije_v,:)
490	endif
491
492	if (guide_zon) CALL guide_zonave(2,jjm,llm,f_add(1:ip1jm,:))
493	CALL guide_addfield(ip1jm,llm,f_add(1:ip1jm,:),alpha_v)
494	IF (f_out) CALL guide_out("V",jjm,llm,f_add(1:ip1jm,:)/factt)
495	vcov(ijb_v:ije_v,:)=vcov(ijb_v:ije_v,:)+f_add(ijb_v:ije_v,:)
496	endif
497
498	END SUBROUTINE guide_main
499
500	!=======================================================================
501	SUBROUTINE guide_addfield(hsize,vsize,field,alpha)
502	! field1=afield1+alphafield2
503
504	IMPLICIT NONE
505	INCLUDE "dimensions.h"
506	INCLUDE "paramet.h"
507
508	! input variables
509	INTEGER, INTENT(IN) :: hsize
510	INTEGER, INTENT(IN) :: vsize
511	REAL, DIMENSION(hsize), INTENT(IN) :: alpha
512	REAL, DIMENSION(hsize,vsize), INTENT(INOUT) :: field
513
514	! Local variables
515	INTEGER :: l
516
517	IF (hsize==ip1jm) THEN
518	do l=1,vsize
519	field(ijb_v:ije_v,l)=alpha(ijb_v:ije_v)field(ijb_v:ije_v,l)alpha_pcor(l)
520	enddo
521	ELSE
522	do l=1,vsize
523	field(ijb_u:ije_u,l)=alpha(ijb_u:ije_u)field(ijb_u:ije_u,l)alpha_pcor(l)
524	enddo
525	ENDIF
526
527	END SUBROUTINE guide_addfield
528
529	!=======================================================================
530	SUBROUTINE guide_zonave(typ,hsize,vsize,field)
531
532	IMPLICIT NONE
533
534	INCLUDE "dimensions.h"
535	INCLUDE "paramet.h"
536	INCLUDE "comgeom.h"
537	INCLUDE "comconst.h"
538
539	! input/output variables
540	INTEGER, INTENT(IN) :: typ
541	INTEGER, INTENT(IN) :: vsize
542	INTEGER, INTENT(IN) :: hsize
543	REAL, DIMENSION(hsize*iip1,vsize), INTENT(INOUT) :: field
544
545	! Local variables
546	LOGICAL, SAVE :: first=.TRUE.
547	INTEGER, DIMENSION (2), SAVE :: imin, imax ! averaging domain
548	INTEGER :: i,j,l,ij
549	REAL, DIMENSION (iip1) :: lond ! longitude in Deg.
550	REAL, DIMENSION (hsize,vsize):: fieldm ! zon-averaged field
551
552	IF (first) THEN
553	first=.FALSE.
554	!Compute domain for averaging
555	lond=rlonu*180./pi
556	imin(1)=1;imax(1)=iip1;
557	imin(2)=1;imax(2)=iip1;
558	IF (guide_reg) THEN
559	DO i=1,iim
560	IF (lond(i).LT.lon_min_g) imin(1)=i
561	IF (lond(i).LE.lon_max_g) imax(1)=i
562	ENDDO
563	lond=rlonv*180./pi
564	DO i=1,iim
565	IF (lond(i).LT.lon_min_g) imin(2)=i
566	IF (lond(i).LE.lon_max_g) imax(2)=i
567	ENDDO
568	ENDIF
569	ENDIF
570
571	fieldm=0.
572
573	IF (hsize==jjm) THEN
574	DO l=1,vsize
575	! Compute zonal average
576	DO j=jjb_v,jje_v
577	DO i=imin(typ),imax(typ)
578	ij=(j-1)*iip1+i
579	fieldm(j,l)=fieldm(j,l)+field(ij,l)
580	ENDDO
581	ENDDO
582	fieldm(:,l)=fieldm(:,l)/ REAL(imax(typ)-imin(typ)+1)
583	! Compute forcing
584	DO j=jjb_v,jje_v
585	DO i=1,iip1
586	ij=(j-1)*iip1+i
587	field(ij,l)=fieldm(j,l)
588	ENDDO
589	ENDDO
590	ENDDO
591	ELSE
592	DO l=1,vsize
593	! Compute zonal average
594	DO j=jjb_v,jje_v
595	DO i=imin(typ),imax(typ)
596	ij=(j-1)*iip1+i
597	fieldm(j,l)=fieldm(j,l)+field(ij,l)
598	ENDDO
599	ENDDO
600	fieldm(:,l)=fieldm(:,l)/ REAL(imax(typ)-imin(typ)+1)
601	! Compute forcing
602	DO j=jjb_u,jje_u
603	DO i=1,iip1
604	ij=(j-1)*iip1+i
605	field(ij,l)=fieldm(j,l)
606	ENDDO
607	ENDDO
608	ENDDO
609	ENDIF
610
611	END SUBROUTINE guide_zonave
612
613	!=======================================================================
614	SUBROUTINE guide_interp(psi,teta)
615	USE parallel
616	USE mod_hallo
617	USE Bands
618	IMPLICIT NONE
619
620	include "dimensions.h"
621	include "paramet.h"
622	include "comvert.h"
623	include "comgeom2.h"
624	include "comconst.h"
625
626	REAL, DIMENSION (iip1,jjp1), INTENT(IN) :: psi ! Psol gcm
627	REAL, DIMENSION (iip1,jjp1,llm), INTENT(IN) :: teta ! Temp. Pot. gcm
628
629	LOGICAL, SAVE :: first=.TRUE.
630	! Variables pour niveaux pression:
631	REAL, DIMENSION (iip1,jjp1,nlevnc) :: plnc1,plnc2 !niveaux pression guidage
632	REAL, DIMENSION (iip1,jjp1,llm) :: plunc,plsnc !niveaux pression modele
633	REAL, DIMENSION (iip1,jjm,llm) :: plvnc !niveaux pression modele
634	REAL, DIMENSION (iip1,jjp1,llmp1) :: p ! pression intercouches
635	REAL, DIMENSION (iip1,jjp1,llm) :: pls, pext ! var intermediaire
636	REAL, DIMENSION (iip1,jjp1,llm) :: pbarx
637	REAL, DIMENSION (iip1,jjm,llm) :: pbary
638	! Variables pour fonction Exner (P milieu couche)
639	REAL, DIMENSION (iip1,jjp1,llm) :: pk, pkf
640	REAL, DIMENSION (iip1,jjp1,llm) :: alpha, beta
641	REAL, DIMENSION (iip1,jjp1) :: pks
642	REAL :: prefkap,unskap
643	! Pression de vapeur saturante
644	REAL, DIMENSION (ip1jmp1,llm) :: qsat
645	!Variables intermediaires interpolation
646	REAL, DIMENSION (iip1,jjp1,llm) :: zu1,zu2
647	REAL, DIMENSION (iip1,jjm,llm) :: zv1,zv2
648
649	INTEGER :: i,j,l,ij
650	TYPE(Request) :: Req
651
652	print *,'Guide: conversion variables guidage'
653	! -----------------------------------------------------------------
654	! Calcul des niveaux de pression champs guidage
655	! -----------------------------------------------------------------
656	if (guide_modele) then
657	do i=1,iip1
658	do j=jjb_u,jje_u
659	do l=1,nlevnc
660	plnc2(i,j,l)=apnc(l)+bpnc(l)*psnat2(i,j)
661	plnc1(i,j,l)=apnc(l)+bpnc(l)*psnat1(i,j)
662	enddo
663	enddo
664	enddo
665	else
666	do i=1,iip1
667	do j=jjb_u,jje_u
668	do l=1,nlevnc
669	plnc2(i,j,l)=apnc(l)
670	plnc1(i,j,l)=apnc(l)
671	enddo
672	enddo
673	enddo
674
675	endif
676	if (first) then
677	first=.FALSE.
678	print*,'Guide: verification ordre niveaux verticaux'
679	print*,'LMDZ :'
680	do l=1,llm
681	print*,'PL(',l,')=',(ap(l)+ap(l+1))/2. &
682	+psi(1,jje_u)*(bp(l)+bp(l+1))/2.
683	enddo
684	print*,'Fichiers guidage'
685	do l=1,nlevnc
686	print*,'PL(',l,')=',plnc2(1,jjb_u,l)
687	enddo
688	print *,'inversion de l''ordre: invert_p=',invert_p
689	if (guide_u) then
690	do l=1,nlevnc
691	print*,'U(',l,')=',unat2(1,jjb_u,l)
692	enddo
693	endif
694	if (guide_T) then
695	do l=1,nlevnc
696	print*,'T(',l,')=',tnat2(1,jjb_u,l)
697	enddo
698	endif
699	endif
700
701	! -----------------------------------------------------------------
702	! Calcul niveaux pression modele
703	! -----------------------------------------------------------------
704	CALL pression_p( ip1jmp1, ap, bp, psi, p )
705	CALL exner_hyb_p(ip1jmp1,psi,p,alpha,beta,pks,pk,pkf)
706
707	! .... Calcul de pls , pression au milieu des couches ,en Pascals
708	unskap=1./kappa
709	prefkap = preff ** kappa
710	DO l = 1, llm
711	DO j=jjb_u,jje_u
712	DO i =1, iip1
713	pls(i,j,l) = preff * ( pk(i,j,l)/cpp) ** unskap
714	ENDDO
715	ENDDO
716	ENDDO
717
718	! calcul des pressions pour les grilles u et v
719	do l=1,llm
720	do j=jjb_u,jje_u
721	do i=1,iip1
722	pext(i,j,l)=pls(i,j,l)*aire(i,j)
723	enddo
724	enddo
725	enddo
726
727	CALL Register_SwapFieldHallo(pext,pext,ip1jmp1,llm,jj_Nb_caldyn,1,2,Req)
728	CALL SendRequest(Req)
729	CALL WaitRequest(Req)
730
731	call massbar_p(pext, pbarx, pbary )
732	do l=1,llm
733	do j=jjb_u,jje_u
734	do i=1,iip1
735	plunc(i,j,l)=pbarx(i,j,l)/aireu(i,j)
736	plsnc(i,j,l)=pls(i,j,l)
737	enddo
738	enddo
739	enddo
740	do l=1,llm
741	do j=jjb_v,jje_v
742	do i=1,iip1
743	plvnc(i,j,l)=pbary(i,j,l)/airev(i,j)
744	enddo
745	enddo
746	enddo
747
748	! -----------------------------------------------------------------
749	! Interpolation champs guidage sur niveaux modele (+inversion N/S)
750	! Conversion en variables gcm (ucov, vcov...)
751	! -----------------------------------------------------------------
752	if (guide_P) then
753	do j=jjb_u,jje_u
754	do i=1,iim
755	ij=(j-1)*iip1+i
756	psgui1(ij)=psnat1(i,j)
757	psgui2(ij)=psnat2(i,j)
758	enddo
759	psgui1(iip1*j)=psnat1(1,j)
760	psgui2(iip1*j)=psnat2(1,j)
761	enddo
762	endif
763
764	IF (guide_u) THEN
765	CALL pres2lev(unat1(:,jjb_u:jje_u,:),zu1(:,jjb_u:jje_u,:),nlevnc,llm, &
766	plnc1(:,jjb_u:jje_u,:),plunc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
767	CALL pres2lev(unat2(:,jjb_u:jje_u,:),zu2(:,jjb_u:jje_u,:),nlevnc,llm, &
768	plnc2(:,jjb_u:jje_u,:),plunc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
769
770	do l=1,llm
771	do j=jjb_u,jje_u
772	do i=1,iim
773	ij=(j-1)*iip1+i
774	ugui1(ij,l)=zu1(i,j,l)*cu(i,j)
775	ugui2(ij,l)=zu2(i,j,l)*cu(i,j)
776	enddo
777	ugui1(jiip1,l)=ugui1((j-1)iip1+1,l)
778	ugui2(jiip1,l)=ugui2((j-1)iip1+1,l)
779	enddo
780	do i=1,iip1
781	ugui1(i,l)=0.
782	ugui1(ip1jm+i,l)=0.
783	ugui2(i,l)=0.
784	ugui2(ip1jm+i,l)=0.
785	enddo
786	enddo
787	ENDIF
788
789	IF (guide_T) THEN
790	CALL pres2lev(tnat1(:,jjb_u:jje_u,:),zu1(:,jjb_u:jje_u,:),nlevnc,llm, &
791	plnc1(:,jjb_u:jje_u,:),plsnc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
792	CALL pres2lev(tnat2(:,jjb_u:jje_u,:),zu2(:,jjb_u:jje_u,:),nlevnc,llm, &
793	plnc2(:,jjb_u:jje_u,:),plsnc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
794
795	do l=1,llm
796	do j=jjb_u,jje_u
797	IF (guide_teta) THEN
798	do i=1,iim
799	ij=(j-1)*iip1+i
800	tgui1(ij,l)=zu1(i,j,l)
801	tgui2(ij,l)=zu2(i,j,l)
802	enddo
803	ELSE
804	do i=1,iim
805	ij=(j-1)*iip1+i
806	tgui1(ij,l)=zu1(i,j,l)*cpp/pk(i,j,l)
807	tgui2(ij,l)=zu2(i,j,l)*cpp/pk(i,j,l)
808	enddo
809	ENDIF
810	tgui1(jiip1,l)=tgui1((j-1)iip1+1,l)
811	tgui2(jiip1,l)=tgui2((j-1)iip1+1,l)
812	enddo
813	do i=1,iip1
814	tgui1(i,l)=tgui1(1,l)
815	tgui1(ip1jm+i,l)=tgui1(ip1jm+1,l)
816	tgui2(i,l)=tgui2(1,l)
817	tgui2(ip1jm+i,l)=tgui2(ip1jm+1,l)
818	enddo
819	enddo
820	ENDIF
821
822	IF (guide_v) THEN
823
824	CALL pres2lev(vnat1(:,jjb_v:jje_v,:),zv1(:,jjb_v:jje_v,:),nlevnc,llm, &
825	plnc1(:,jjb_v:jje_v,:),plvnc(:,jjb_v:jje_v,:),iip1,jjn_v,invert_p)
826	CALL pres2lev(vnat2(:,jjb_v:jje_v,:),zv2(:,jjb_v:jje_v,:),nlevnc,llm, &
827	plnc2(:,jjb_v:jje_v,:),plvnc(:,jjb_v:jje_v,:),iip1,jjn_v,invert_p)
828
829	do l=1,llm
830	do j=jjb_v,jje_v
831	do i=1,iim
832	ij=(j-1)*iip1+i
833	vgui1(ij,l)=zv1(i,j,l)*cv(i,j)
834	vgui2(ij,l)=zv2(i,j,l)*cv(i,j)
835	enddo
836	vgui1(jiip1,l)=vgui1((j-1)iip1+1,l)
837	vgui2(jiip1,l)=vgui2((j-1)iip1+1,l)
838	enddo
839	enddo
840	ENDIF
841
842	IF (guide_Q) THEN
843	! On suppose qu'on a la bonne variable dans le fichier de guidage:
844	! Hum.Rel si guide_hr, Hum.Spec. sinon.
845	CALL pres2lev(qnat1(:,jjb_u:jje_u,:),zu1(:,jjb_u:jje_u,:),nlevnc,llm, &
846	plnc1(:,jjb_u:jje_u,:),plsnc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
847	CALL pres2lev(qnat2(:,jjb_u:jje_u,:),zu2(:,jjb_u:jje_u,:),nlevnc,llm, &
848	plnc2(:,jjb_u:jje_u,:),plsnc(:,jjb_u:jje_u,:),iip1,jjn_u,invert_p)
849
850	do l=1,llm
851	do j=jjb_u,jjb_v
852	do i=1,iim
853	ij=(j-1)*iip1+i
854	qgui1(ij,l)=zu1(i,j,l)
855	qgui2(ij,l)=zu2(i,j,l)
856	enddo
857	qgui1(jiip1,l)=qgui1((j-1)iip1+1,l)
858	qgui2(jiip1,l)=qgui2((j-1)iip1+1,l)
859	enddo
860	do i=1,iip1
861	qgui1(i,l)=qgui1(1,l)
862	qgui1(ip1jm+i,l)=qgui1(ip1jm+1,l)
863	qgui2(i,l)=qgui2(1,l)
864	qgui2(ip1jm+i,l)=qgui2(ip1jm+1,l)
865	enddo
866	enddo
867	IF (guide_hr) THEN
868	CALL q_sat(iip1jjn_ullm,teta(:,jjb_u:jje_u,:)*pk(:,jjb_u:jje_u,:)/cpp, &
869	plsnc(:,jjb_u:jje_u,:),qsat(ijb_u:ije_u,:))
870	qgui1(ijb_u:ije_u,:)=qgui1(ijb_u:ije_u,:)qsat(ijb_u:ije_u,:)0.01 !hum. rel. en %
871	qgui2(ijb_u:ije_u,:)=qgui2(ijb_u:ije_u,:)qsat(ijb_u:ije_u,:)0.01
872	ENDIF
873	ENDIF
874
875	END SUBROUTINE guide_interp
876
877	!=======================================================================
878	SUBROUTINE tau2alpha(typ,pim,pjm,factt,taumin,taumax,alpha)
879
880	! Calcul des constantes de rappel alpha (=1/tau)
881
882	implicit none
883
884	include "dimensions.h"
885	include "paramet.h"
886	include "comconst.h"
887	include "comgeom2.h"
888	include "serre.h"
889
890	! input arguments :
891	INTEGER, INTENT(IN) :: typ ! u(2),v(3), ou scalaire(1)
892	INTEGER, INTENT(IN) :: pim,pjm ! dimensions en lat, lon
893	REAL, INTENT(IN) :: factt ! pas de temps en fraction de jour
894	REAL, INTENT(IN) :: taumin,taumax
895	! output arguments:
896	REAL, DIMENSION(pim,pjm), INTENT(OUT) :: alpha
897
898	! local variables:
899	LOGICAL, SAVE :: first=.TRUE.
900	REAL, SAVE :: gamma,dxdy_min,dxdy_max
901	REAL, DIMENSION (iip1,jjp1) :: zdx,zdy
902	REAL, DIMENSION (iip1,jjp1) :: dxdys,dxdyu
903	REAL, DIMENSION (iip1,jjm) :: dxdyv
904	real dxdy_
905	real zlat,zlon
906	real alphamin,alphamax,xi
907	integer i,j,ilon,ilat
908
909
910	alphamin=factt/taumax
911	alphamax=factt/taumin
912	IF (guide_reg.OR.guide_add) THEN
913	alpha=alphamax
914	!-----------------------------------------------------------------------
915	! guide_reg: alpha=alpha_min dans region, 0. sinon.
916	!-----------------------------------------------------------------------
917	IF (guide_reg) THEN
918	do j=1,pjm
919	do i=1,pim
920	if (typ.eq.2) then
921	zlat=rlatu(j)*180./pi
922	zlon=rlonu(i)*180./pi
923	elseif (typ.eq.1) then
924	zlat=rlatu(j)*180./pi
925	zlon=rlonv(i)*180./pi
926	elseif (typ.eq.3) then
927	zlat=rlatv(j)*180./pi
928	zlon=rlonv(i)*180./pi
929	endif
930	alpha(i,j)=alphamax/16.* &
931	(1.+tanh((zlat-lat_min_g)/tau_lat))* &
932	(1.+tanh((lat_max_g-zlat)/tau_lat))* &
933	(1.+tanh((zlon-lon_min_g)/tau_lon))* &
934	(1.+tanh((lon_max_g-zlon)/tau_lon))
935	enddo
936	enddo
937	ENDIF
938	ELSE
939	!-----------------------------------------------------------------------
940	! Sinon, alpha varie entre alpha_min et alpha_max suivant le zoom.
941	!-----------------------------------------------------------------------
942	!Calcul de l'aire des mailles
943	do j=2,jjm
944	do i=2,iip1
945	zdx(i,j)=0.5*(cu(i-1,j)+cu(i,j))/cos(rlatu(j))
946	enddo
947	zdx(1,j)=zdx(iip1,j)
948	enddo
949	do j=2,jjm
950	do i=1,iip1
951	zdy(i,j)=0.5*(cv(i,j-1)+cv(i,j))
952	enddo
953	enddo
954	do i=1,iip1
955	zdx(i,1)=zdx(i,2)
956	zdx(i,jjp1)=zdx(i,jjm)
957	zdy(i,1)=zdy(i,2)
958	zdy(i,jjp1)=zdy(i,jjm)
959	enddo
960	do j=1,jjp1
961	do i=1,iip1
962	dxdys(i,j)=sqrt(zdx(i,j)zdx(i,j)+zdy(i,j)zdy(i,j))
963	enddo
964	enddo
965	IF (typ.EQ.2) THEN
966	do j=1,jjp1
967	do i=1,iim
968	dxdyu(i,j)=0.5*(dxdys(i,j)+dxdys(i+1,j))
969	enddo
970	dxdyu(iip1,j)=dxdyu(1,j)
971	enddo
972	ENDIF
973	IF (typ.EQ.3) THEN
974	do j=1,jjm
975	do i=1,iip1
976	dxdyv(i,j)=0.5*(dxdys(i,j)+dxdys(i,j+1))
977	enddo
978	enddo
979	ENDIF
980	! Premier appel: calcul des aires min et max et de gamma.
981	IF (first) THEN
982	first=.FALSE.
983	! coordonnees du centre du zoom
984	CALL coordij(clon,clat,ilon,ilat)
985	! aire de la maille au centre du zoom
986	dxdy_min=dxdys(ilon,ilat)
987	! dxdy maximale de la maille
988	dxdy_max=0.
989	do j=1,jjp1
990	do i=1,iip1
991	dxdy_max=max(dxdy_max,dxdys(i,j))
992	enddo
993	enddo
994	! Calcul de gamma
995	if (abs(grossismx-1.).lt.0.1.or.abs(grossismy-1.).lt.0.1) then
996	print*,'ATTENTION modele peu zoome'
997	print*,'ATTENTION on prend une constante de guidage cste'
998	gamma=0.
999	else
1000	gamma=(dxdy_max-2.*dxdy_min)/(dxdy_max-dxdy_min)
1001	print*,'gamma=',gamma
1002	if (gamma.lt.1.e-5) then
1003	print*,'gamma =',gamma,'<1e-5'
1004	stop
1005	endif
1006	gamma=log(0.5)/log(gamma)
1007	if (gamma4) then
1008	gamma=min(gamma,4.)
1009	endif
1010	print*,'gamma=',gamma
1011	endif
1012	ENDIF !first
1013
1014	do j=1,pjm
1015	do i=1,pim
1016	if (typ.eq.1) then
1017	dxdy_=dxdys(i,j)
1018	zlat=rlatu(j)*180./pi
1019	elseif (typ.eq.2) then
1020	dxdy_=dxdyu(i,j)
1021	zlat=rlatu(j)*180./pi
1022	elseif (typ.eq.3) then
1023	dxdy_=dxdyv(i,j)
1024	zlat=rlatv(j)*180./pi
1025	endif
1026	if (abs(grossismx-1.).lt.0.1.or.abs(grossismy-1.).lt.0.1) then
1027	! pour une grille reguliere, xi=xxx**0=1 -> alpha=alphamin
1028	alpha(i,j)=alphamin
1029	else
1030	xi=((dxdy_max-dxdy_)/(dxdy_max-dxdy_min))**gamma
1031	xi=min(xi,1.)
1032	if(lat_min_g.le.zlat .and. zlat.le.lat_max_g) then
1033	alpha(i,j)=xialphamin+(1.-xi)alphamax
1034	else
1035	alpha(i,j)=0.
1036	endif
1037	endif
1038	enddo
1039	enddo
1040	ENDIF ! guide_reg
1041
1042	END SUBROUTINE tau2alpha
1043
1044	!=======================================================================
1045	SUBROUTINE guide_read(timestep)
1046
1047	IMPLICIT NONE
1048
1049	#include "netcdf.inc"
1050	#include "dimensions.h"
1051	#include "paramet.h"
1052
1053	INTEGER, INTENT(IN) :: timestep
1054
1055	LOGICAL, SAVE :: first=.TRUE.
1056	! Identification fichiers et variables NetCDF:
1057	INTEGER, SAVE :: ncidu,varidu,ncidv,varidv,ncidQ
1058	INTEGER, SAVE :: varidQ,ncidt,varidt,ncidps,varidps
1059	INTEGER :: ncidpl,varidpl,varidap,varidbp
1060	! Variables auxiliaires NetCDF:
1061	INTEGER, DIMENSION(4) :: start,count
1062	INTEGER :: status,rcode
1063
1064	! -----------------------------------------------------------------
1065	! Premier appel: initialisation de la lecture des fichiers
1066	! -----------------------------------------------------------------
1067	if (first) then
1068	ncidpl=-99
1069	print*,'Guide: ouverture des fichiers guidage '
1070	! Niveaux de pression si non constants
1071	if (guide_modele) then
1072	print *,'Lecture du guidage sur niveaux mod�le'
1073	rcode = nf90_open('apbp.nc', nf90_nowrite, ncidpl)
1074	rcode = nf90_inq_varid(ncidpl, 'AP', varidap)
1075	rcode = nf90_inq_varid(ncidpl, 'BP', varidbp)
1076	print*,'ncidpl,varidap',ncidpl,varidap
1077	endif
1078	! Vent zonal
1079	if (guide_u) then
1080	rcode = nf90_open('u.nc', nf90_nowrite, ncidu)
1081	rcode = nf90_inq_varid(ncidu, 'UWND', varidu)
1082	print*,'ncidu,varidu',ncidu,varidu
1083	if (ncidpl.eq.-99) ncidpl=ncidu
1084	endif
1085	! Vent meridien
1086	if (guide_v) then
1087	rcode = nf90_open('v.nc', nf90_nowrite, ncidv)
1088	rcode = nf90_inq_varid(ncidv, 'VWND', varidv)
1089	print*,'ncidv,varidv',ncidv,varidv
1090	if (ncidpl.eq.-99) ncidpl=ncidv
1091	endif
1092	! Temperature
1093	if (guide_T) then
1094	rcode = nf90_open('T.nc', nf90_nowrite, ncidt)
1095	rcode = nf90_inq_varid(ncidt, 'AIR', varidt)
1096	print*,'ncidT,varidT',ncidt,varidt
1097	if (ncidpl.eq.-99) ncidpl=ncidt
1098	endif
1099	! Humidite
1100	if (guide_Q) then
1101	rcode = nf90_open('hur.nc', nf90_nowrite, ncidQ)
1102	rcode = nf90_inq_varid(ncidQ, 'RH', varidQ)
1103	print*,'ncidQ,varidQ',ncidQ,varidQ
1104	if (ncidpl.eq.-99) ncidpl=ncidQ
1105	endif
1106	! Pression de surface
1107	if ((guide_P).OR.(guide_modele)) then
1108	rcode = nf90_open('ps.nc', nf90_nowrite, ncidps)
1109	rcode = nf90_inq_varid(ncidps, 'SP', varidps)
1110	print*,'ncidps,varidps',ncidps,varidps
1111	endif
1112	! Coordonnee verticale
1113	if (.not.guide_modele) then
1114	rcode = nf90_inq_varid(ncidpl, 'LEVEL', varidpl)
1115	IF (rcode.NE.0) rcode = nf90_inq_varid(ncidpl, 'PRESSURE', varidpl)
1116	print*,'ncidpl,varidpl',ncidpl,varidpl
1117	endif
1118	! Coefs ap, bp pour calcul de la pression aux differents niveaux
1119	if (guide_modele) then
1120	#ifdef NC_DOUBLE
1121	status=NF_GET_VARA_DOUBLE(ncidpl,varidap,1,nlevnc,apnc)
1122	status=NF_GET_VARA_DOUBLE(ncidpl,varidbp,1,nlevnc,bpnc)
1123	#else
1124	status=NF_GET_VARA_REAL(ncidpl,varidap,1,nlevnc,apnc)
1125	status=NF_GET_VARA_REAL(ncidpl,varidbp,1,nlevnc,bpnc)
1126	#endif
1127	else
1128	#ifdef NC_DOUBLE
1129	status=NF_GET_VARA_DOUBLE(ncidpl,varidpl,1,nlevnc,apnc)
1130	#else
1131	status=NF_GET_VARA_REAL(ncidpl,varidpl,1,nlevnc,apnc)
1132	#endif
1133	apnc=apnc*100.! conversion en Pascals
1134	bpnc(:)=0.
1135	endif
1136	first=.FALSE.
1137	endif ! (first)
1138
1139	! -----------------------------------------------------------------
1140	! lecture des champs u, v, T, Q, ps
1141	! -----------------------------------------------------------------
1142
1143	! dimensions pour les champs scalaires et le vent zonal
1144	start(1)=1
1145	start(2)=1
1146	start(3)=1
1147	start(4)=timestep
1148
1149	count(1)=iip1
1150	count(2)=jjp1
1151	count(3)=nlevnc
1152	count(4)=1
1153
1154	! Vent zonal
1155	if (guide_u) then
1156	#ifdef NC_DOUBLE
1157	status=NF_GET_VARA_DOUBLE(ncidu,varidu,start,count,unat2)
1158	#else
1159	status=NF_GET_VARA_REAL(ncidu,varidu,start,count,unat2)
1160	#endif
1161	IF (invert_y) THEN
1162	CALL invert_lat(iip1,jjp1,nlevnc,unat2)
1163	ENDIF
1164
1165	endif
1166
1167	! Temperature
1168	if (guide_T) then
1169	#ifdef NC_DOUBLE
1170	status=NF_GET_VARA_DOUBLE(ncidt,varidt,start,count,tnat2)
1171	#else
1172	status=NF_GET_VARA_REAL(ncidt,varidt,start,count,tnat2)
1173	#endif
1174	IF (invert_y) THEN
1175	CALL invert_lat(iip1,jjp1,nlevnc,tnat2)
1176	ENDIF
1177	endif
1178
1179	! Humidite
1180	if (guide_Q) then
1181	#ifdef NC_DOUBLE
1182	status=NF_GET_VARA_DOUBLE(ncidQ,varidQ,start,count,qnat2)
1183	#else
1184	status=NF_GET_VARA_REAL(ncidQ,varidQ,start,count,qnat2)
1185	#endif
1186	IF (invert_y) THEN
1187	CALL invert_lat(iip1,jjp1,nlevnc,qnat2)
1188	ENDIF
1189
1190	endif
1191
1192	! Vent meridien
1193	if (guide_v) then
1194	count(2)=jjm
1195	#ifdef NC_DOUBLE
1196	status=NF_GET_VARA_DOUBLE(ncidv,varidv,start,count,vnat2)
1197	#else
1198	status=NF_GET_VARA_REAL(ncidv,varidv,start,count,vnat2)
1199	#endif
1200	IF (invert_y) THEN
1201	CALL invert_lat(iip1,jjm,nlevnc,vnat2)
1202	ENDIF
1203	endif
1204
1205	! Pression de surface
1206	if ((guide_P).OR.(guide_modele)) then
1207	start(3)=timestep
1208	start(4)=0
1209	count(2)=jjp1
1210	count(3)=1
1211	count(4)=0
1212	#ifdef NC_DOUBLE
1213	status=NF_GET_VARA_DOUBLE(ncidps,varidps,start,count,psnat2)
1214	#else
1215	status=NF_GET_VARA_REAL(ncidps,varidps,start,count,psnat2)
1216	#endif
1217	IF (invert_y) THEN
1218	CALL invert_lat(iip1,jjp1,1,psnat2)
1219	ENDIF
1220	endif
1221
1222	END SUBROUTINE guide_read
1223
1224	!=======================================================================
1225	SUBROUTINE guide_read2D(timestep)
1226
1227	IMPLICIT NONE
1228
1229	#include "netcdf.inc"
1230	#include "dimensions.h"
1231	#include "paramet.h"
1232
1233	INTEGER, INTENT(IN) :: timestep
1234
1235	LOGICAL, SAVE :: first=.TRUE.
1236	! Identification fichiers et variables NetCDF:
1237	INTEGER, SAVE :: ncidu,varidu,ncidv,varidv,ncidQ
1238	INTEGER, SAVE :: varidQ,ncidt,varidt,ncidps,varidps
1239	INTEGER :: ncidpl,varidpl,varidap,varidbp
1240	! Variables auxiliaires NetCDF:
1241	INTEGER, DIMENSION(4) :: start,count
1242	INTEGER :: status,rcode
1243	! Variables for 3D extension:
1244	REAL, DIMENSION (jjp1,llm) :: zu
1245	REAL, DIMENSION (jjm,llm) :: zv
1246	INTEGER :: i
1247
1248	! -----------------------------------------------------------------
1249	! Premier appel: initialisation de la lecture des fichiers
1250	! -----------------------------------------------------------------
1251	if (first) then
1252	ncidpl=-99
1253	print*,'Guide: ouverture des fichiers guidage '
1254	! Niveaux de pression si non constants
1255	if (guide_modele) then
1256	print *,'Lecture du guidage sur niveaux mod�le'
1257	rcode = nf90_open('apbp.nc', nf90_nowrite, ncidpl)
1258	rcode = nf90_inq_varid(ncidpl, 'AP', varidap)
1259	rcode = nf90_inq_varid(ncidpl, 'BP', varidbp)
1260	print*,'ncidpl,varidap',ncidpl,varidap
1261	endif
1262	! Vent zonal
1263	if (guide_u) then
1264	rcode = nf90_open('u.nc', nf90_nowrite, ncidu)
1265	rcode = nf90_inq_varid(ncidu, 'UWND', varidu)
1266	print*,'ncidu,varidu',ncidu,varidu
1267	if (ncidpl.eq.-99) ncidpl=ncidu
1268	endif
1269	! Vent meridien
1270	if (guide_v) then
1271	rcode = nf90_open('v.nc', nf90_nowrite, ncidv)
1272	rcode = nf90_inq_varid(ncidv, 'VWND', varidv)
1273	print*,'ncidv,varidv',ncidv,varidv
1274	if (ncidpl.eq.-99) ncidpl=ncidv
1275	endif
1276	! Temperature
1277	if (guide_T) then
1278	rcode = nf90_open('T.nc', nf90_nowrite, ncidt)
1279	rcode = nf90_inq_varid(ncidt, 'AIR', varidt)
1280	print*,'ncidT,varidT',ncidt,varidt
1281	if (ncidpl.eq.-99) ncidpl=ncidt
1282	endif
1283	! Humidite
1284	if (guide_Q) then
1285	rcode = nf90_open('hur.nc', nf90_nowrite, ncidQ)
1286	rcode = nf90_inq_varid(ncidQ, 'RH', varidQ)
1287	print*,'ncidQ,varidQ',ncidQ,varidQ
1288	if (ncidpl.eq.-99) ncidpl=ncidQ
1289	endif
1290	! Pression de surface
1291	if ((guide_P).OR.(guide_modele)) then
1292	rcode = nf90_open('ps.nc', nf90_nowrite, ncidps)
1293	rcode = nf90_inq_varid(ncidps, 'SP', varidps)
1294	print*,'ncidps,varidps',ncidps,varidps
1295	endif
1296	! Coordonnee verticale
1297	if (.not.guide_modele) then
1298	rcode = nf90_inq_varid(ncidpl, 'LEVEL', varidpl)
1299	IF (rcode.NE.0) rcode = nf90_inq_varid(ncidpl, 'PRESSURE', varidpl)
1300	print*,'ncidpl,varidpl',ncidpl,varidpl
1301	endif
1302	! Coefs ap, bp pour calcul de la pression aux differents niveaux
1303	if (guide_modele) then
1304	#ifdef NC_DOUBLE
1305	status=NF_GET_VARA_DOUBLE(ncidpl,varidap,1,nlevnc,apnc)
1306	status=NF_GET_VARA_DOUBLE(ncidpl,varidbp,1,nlevnc,bpnc)
1307	#else
1308	status=NF_GET_VARA_REAL(ncidpl,varidap,1,nlevnc,apnc)
1309	status=NF_GET_VARA_REAL(ncidpl,varidbp,1,nlevnc,bpnc)
1310	#endif
1311	else
1312	#ifdef NC_DOUBLE
1313	status=NF_GET_VARA_DOUBLE(ncidpl,varidpl,1,nlevnc,apnc)
1314	#else
1315	status=NF_GET_VARA_REAL(ncidpl,varidpl,1,nlevnc,apnc)
1316	#endif
1317	apnc=apnc*100.! conversion en Pascals
1318	bpnc(:)=0.
1319	endif
1320	first=.FALSE.
1321	endif ! (first)
1322
1323	! -----------------------------------------------------------------
1324	! lecture des champs u, v, T, Q, ps
1325	! -----------------------------------------------------------------
1326
1327	! dimensions pour les champs scalaires et le vent zonal
1328	start(1)=1
1329	start(2)=1
1330	start(3)=1
1331	start(4)=timestep
1332
1333	count(1)=1
1334	count(2)=jjp1
1335	count(3)=nlevnc
1336	count(4)=1
1337
1338	! Vent zonal
1339	if (guide_u) then
1340	#ifdef NC_DOUBLE
1341	status=NF_GET_VARA_DOUBLE(ncidu,varidu,start,count,zu)
1342	#else
1343	status=NF_GET_VARA_REAL(ncidu,varidu,start,count,zu)
1344	#endif
1345	DO i=1,iip1
1346	unat2(i,:,:)=zu(:,:)
1347	ENDDO
1348
1349	IF (invert_y) THEN
1350	CALL invert_lat(iip1,jjp1,nlevnc,unat2)
1351	ENDIF
1352
1353	endif
1354
1355	! Temperature
1356	if (guide_T) then
1357	#ifdef NC_DOUBLE
1358	status=NF_GET_VARA_DOUBLE(ncidt,varidt,start,count,zu)
1359	#else
1360	status=NF_GET_VARA_REAL(ncidt,varidt,start,count,zu)
1361	#endif
1362	DO i=1,iip1
1363	tnat2(i,:,:)=zu(:,:)
1364	ENDDO
1365
1366	IF (invert_y) THEN
1367	CALL invert_lat(iip1,jjp1,nlevnc,tnat2)
1368	ENDIF
1369
1370	endif
1371
1372	! Humidite
1373	if (guide_Q) then
1374	#ifdef NC_DOUBLE
1375	status=NF_GET_VARA_DOUBLE(ncidQ,varidQ,start,count,zu)
1376	#else
1377	status=NF_GET_VARA_REAL(ncidQ,varidQ,start,count,zu)
1378	#endif
1379	DO i=1,iip1
1380	qnat2(i,:,:)=zu(:,:)
1381	ENDDO
1382
1383	IF (invert_y) THEN
1384	CALL invert_lat(iip1,jjp1,nlevnc,qnat2)
1385	ENDIF
1386
1387	endif
1388
1389	! Vent meridien
1390	if (guide_v) then
1391	count(2)=jjm
1392	#ifdef NC_DOUBLE
1393	status=NF_GET_VARA_DOUBLE(ncidv,varidv,start,count,zv)
1394	#else
1395	status=NF_GET_VARA_REAL(ncidv,varidv,start,count,zv)
1396	#endif
1397	DO i=1,iip1
1398	vnat2(i,:,:)=zv(:,:)
1399	ENDDO
1400
1401	IF (invert_y) THEN
1402	CALL invert_lat(iip1,jjm,nlevnc,vnat2)
1403	ENDIF
1404
1405	endif
1406
1407	! Pression de surface
1408	if ((guide_P).OR.(guide_modele)) then
1409	start(3)=timestep
1410	start(4)=0
1411	count(2)=jjp1
1412	count(3)=1
1413	count(4)=0
1414	#ifdef NC_DOUBLE
1415	status=NF_GET_VARA_DOUBLE(ncidps,varidps,start,count,zu(:,1))
1416	#else
1417	status=NF_GET_VARA_REAL(ncidps,varidps,start,count,zu(:,1))
1418	#endif
1419	DO i=1,iip1
1420	psnat2(i,:)=zu(:,1)
1421	ENDDO
1422
1423	IF (invert_y) THEN
1424	CALL invert_lat(iip1,jjp1,1,psnat2)
1425	ENDIF
1426
1427	endif
1428
1429	END SUBROUTINE guide_read2D
1430
1431	!=======================================================================
1432	SUBROUTINE guide_out(varname,hsize,vsize,field)
1433	USE parallel
1434	IMPLICIT NONE
1435
1436	INCLUDE "dimensions.h"
1437	INCLUDE "paramet.h"
1438	INCLUDE "netcdf.inc"
1439	INCLUDE "comgeom2.h"
1440	INCLUDE "comconst.h"
1441	INCLUDE "comvert.h"
1442
1443	! Variables entree
1444	CHARACTER, INTENT(IN) :: varname
1445	INTEGER, INTENT (IN) :: hsize,vsize
1446	REAL, DIMENSION (iip1,hsize,vsize), INTENT(IN) :: field
1447
1448	! Variables locales
1449	INTEGER, SAVE :: timestep=0
1450	! Identites fichier netcdf
1451	INTEGER :: nid, id_lonu, id_lonv, id_latu, id_latv, id_tim, id_lev
1452	INTEGER :: vid_lonu,vid_lonv,vid_latu,vid_latv,vid_cu,vid_cv,vid_lev
1453	INTEGER, DIMENSION (3) :: dim3
1454	INTEGER, DIMENSION (4) :: dim4,count,start
1455	INTEGER :: ierr, varid
1456
1457	CALL gather_field(field,iip1*hsize,vsize,0)
1458
1459	IF (mpi_rank /= 0) RETURN
1460
1461	print *,'Guide: output timestep',timestep,'var ',varname
1462	IF (timestep.EQ.0) THEN
1463	! ----------------------------------------------
1464	! initialisation fichier de sortie
1465	! ----------------------------------------------
1466	! Ouverture du fichier
1467	ierr=NF_CREATE("guide_ins.nc",NF_CLOBBER,nid)
1468	! Definition des dimensions
1469	ierr=NF_DEF_DIM(nid,"LONU",iip1,id_lonu)
1470	ierr=NF_DEF_DIM(nid,"LONV",iip1,id_lonv)
1471	ierr=NF_DEF_DIM(nid,"LATU",jjp1,id_latu)
1472	ierr=NF_DEF_DIM(nid,"LATV",jjm,id_latv)
1473	ierr=NF_DEF_DIM(nid,"LEVEL",llm,id_lev)
1474	ierr=NF_DEF_DIM(nid,"TIME",NF_UNLIMITED,id_tim)
1475
1476	! Creation des variables dimensions
1477	ierr=NF_DEF_VAR(nid,"LONU",NF_FLOAT,1,id_lonu,vid_lonu)
1478	ierr=NF_DEF_VAR(nid,"LONV",NF_FLOAT,1,id_lonv,vid_lonv)
1479	ierr=NF_DEF_VAR(nid,"LATU",NF_FLOAT,1,id_latu,vid_latu)
1480	ierr=NF_DEF_VAR(nid,"LATV",NF_FLOAT,1,id_latv,vid_latv)
1481	ierr=NF_DEF_VAR(nid,"LEVEL",NF_FLOAT,1,id_lev,vid_lev)
1482	ierr=NF_DEF_VAR(nid,"cu",NF_FLOAT,2,(/id_lonu,id_latu/),vid_cu)
1483	ierr=NF_DEF_VAR(nid,"cv",NF_FLOAT,2,(/id_lonv,id_latv/),vid_cv)
1484
1485	ierr=NF_ENDDEF(nid)
1486
1487	! Enregistrement des variables dimensions
1488	#ifdef NC_DOUBLE
1489	ierr = NF_PUT_VAR_DOUBLE(nid,vid_lonu,rlonu*180./pi)
1490	ierr = NF_PUT_VAR_DOUBLE(nid,vid_lonv,rlonv*180./pi)
1491	ierr = NF_PUT_VAR_DOUBLE(nid,vid_latu,rlatu*180./pi)
1492	ierr = NF_PUT_VAR_DOUBLE(nid,vid_latv,rlatv*180./pi)
1493	ierr = NF_PUT_VAR_DOUBLE(nid,vid_lev,presnivs)
1494	ierr = NF_PUT_VAR_DOUBLE(nid,vid_cu,cu)
1495	ierr = NF_PUT_VAR_DOUBLE(nid,vid_cv,cv)
1496	#else
1497	ierr = NF_PUT_VAR_REAL(nid,vid_lonu,rlonu*180./pi)
1498	ierr = NF_PUT_VAR_REAL(nid,vid_lonv,rlonv*180./pi)
1499	ierr = NF_PUT_VAR_REAL(nid,vid_latu,rlatu*180./pi)
1500	ierr = NF_PUT_VAR_REAL(nid,vid_latv,rlatv*180./pi)
1501	ierr = NF_PUT_VAR_REAL(nid,vid_lev,presnivs)
1502	ierr = NF_PUT_VAR_REAL(nid,vid_cu,cu)
1503	ierr = NF_PUT_VAR_REAL(nid,vid_cv,cv)
1504	#endif
1505	! --------------------------------------------------------------------
1506	! Cr�ation des variables sauvegard�es
1507	! --------------------------------------------------------------------
1508	ierr = NF_REDEF(nid)
1509	! Surface pressure (GCM)
1510	dim3=(/id_lonv,id_latu,id_tim/)
1511	ierr = NF_DEF_VAR(nid,"SP",NF_FLOAT,3,dim3,varid)
1512	! Surface pressure (guidage)
1513	IF (guide_P) THEN
1514	dim3=(/id_lonv,id_latu,id_tim/)
1515	ierr = NF_DEF_VAR(nid,"ps",NF_FLOAT,3,dim3,varid)
1516	ENDIF
1517	! Zonal wind
1518	IF (guide_u) THEN
1519	dim4=(/id_lonu,id_latu,id_lev,id_tim/)
1520	ierr = NF_DEF_VAR(nid,"ucov",NF_FLOAT,4,dim4,varid)
1521	ENDIF
1522	! Merid. wind
1523	IF (guide_v) THEN
1524	dim4=(/id_lonv,id_latv,id_lev,id_tim/)
1525	ierr = NF_DEF_VAR(nid,"vcov",NF_FLOAT,4,dim4,varid)
1526	ENDIF
1527	! Pot. Temperature
1528	IF (guide_T) THEN
1529	dim4=(/id_lonv,id_latu,id_lev,id_tim/)
1530	ierr = NF_DEF_VAR(nid,"teta",NF_FLOAT,4,dim4,varid)
1531	ENDIF
1532	! Specific Humidity
1533	IF (guide_Q) THEN
1534	dim4=(/id_lonv,id_latu,id_lev,id_tim/)
1535	ierr = NF_DEF_VAR(nid,"q",NF_FLOAT,4,dim4,varid)
1536	ENDIF
1537
1538	ierr = NF_ENDDEF(nid)
1539	ierr = NF_CLOSE(nid)
1540	ENDIF ! timestep=0
1541
1542	! --------------------------------------------------------------------
1543	! Enregistrement du champ
1544	! --------------------------------------------------------------------
1545	ierr=NF_OPEN("guide_ins.nc",NF_WRITE,nid)
1546
1547	SELECT CASE (varname)
1548	CASE ("S")
1549	timestep=timestep+1
1550	ierr = NF_INQ_VARID(nid,"SP",varid)
1551	start=(/1,1,timestep,0/)
1552	count=(/iip1,jjp1,1,0/)
1553	#ifdef NC_DOUBLE
1554	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1555	#else
1556	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1557	#endif
1558	CASE ("P")
1559	ierr = NF_INQ_VARID(nid,"ps",varid)
1560	start=(/1,1,timestep,0/)
1561	count=(/iip1,jjp1,1,0/)
1562	#ifdef NC_DOUBLE
1563	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1564	#else
1565	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1566	#endif
1567	CASE ("U")
1568	ierr = NF_INQ_VARID(nid,"ucov",varid)
1569	start=(/1,1,1,timestep/)
1570	count=(/iip1,jjp1,llm,1/)
1571	#ifdef NC_DOUBLE
1572	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1573	#else
1574	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1575	#endif
1576	CASE ("V")
1577	ierr = NF_INQ_VARID(nid,"vcov",varid)
1578	start=(/1,1,1,timestep/)
1579	count=(/iip1,jjm,llm,1/)
1580	#ifdef NC_DOUBLE
1581	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1582	#else
1583	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1584	#endif
1585	CASE ("T")
1586	ierr = NF_INQ_VARID(nid,"teta",varid)
1587	start=(/1,1,1,timestep/)
1588	count=(/iip1,jjp1,llm,1/)
1589	#ifdef NC_DOUBLE
1590	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1591	#else
1592	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1593	#endif
1594	CASE ("Q")
1595	ierr = NF_INQ_VARID(nid,"q",varid)
1596	start=(/1,1,1,timestep/)
1597	count=(/iip1,jjp1,llm,1/)
1598	#ifdef NC_DOUBLE
1599	ierr = NF_PUT_VARA_DOUBLE(nid,varid,start,count,field)
1600	#else
1601	ierr = NF_PUT_VARA_REAL(nid,varid,start,count,field)
1602	#endif
1603	END SELECT
1604
1605	ierr = NF_CLOSE(nid)
1606
1607	END SUBROUTINE guide_out
1608
1609
1610	!===========================================================================
1611	subroutine correctbid(iim,nl,x)
1612	integer iim,nl
1613	real x(iim+1,nl)
1614	integer i,l
1615	real zz
1616
1617	do l=1,nl
1618	do i=2,iim-1
1619	if(abs(x(i,l)).gt.1.e10) then
1620	zz=0.5*(x(i-1,l)+x(i+1,l))
1621	print*,'correction ',i,l,x(i,l),zz
1622	x(i,l)=zz
1623	endif
1624	enddo
1625	enddo
1626	return
1627	end subroutine correctbid
1628
1629	!===========================================================================
1630	END MODULE guide_p_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format