source: LMDZ4/trunk/libf/dyn3dpar/ce0l.F90 @ 3840

Last change on this file since 3840 was 1425, checked in by lguez, 14 years ago

Replaced Numerical Recipes procedures for spline interpolation (not in
the public domain) by procedures from the Pchip package in the Slatec
library. This only affects the program "ce0l", not the program
"gcm". Tested on Brodie SX8 with "-debug" and "-prod", "-parallel
none" and "-parallel mpi". "start.nc" and "limit.nc" are
changed. "startphy.nc" is not changed. The relative change is of order
1e-7 or less. The revision makes the program faster (tested on Brodie
with "-prod -d 144x142x39", CPU time is 38 s, instead of 54
s). Procedures from Slatec are untouched, except for
"i1mach.F". Created procedures "pchfe_95" and "pchsp_95" which are
wrappers for "pchfe" and "pchsp" from Slatec. "pchfe_95" and
"pchsp_95" have a safer and simpler interface.

Replaced "make" by "sxgmake" in "arch-SX8_BRODIE.fcm". Added files for
compilation by FCM with "g95".

In "arch-linux-32bit.fcm", replaced "pgf90" by "pgf95". There was no
difference between "dev" and "debug" so added "-O1" to "dev". Added
debugging options. Removed "-Wl,-Bstatic
-L/usr/lib/gcc-lib/i386-linux/2.95.2", which usually produces an error
at link-time.

Bash is now ubiquitous while KornShell? is not so use Bash instead of
KornShell? in FCM.

Replaced some statements "write(6,*)" by "write(lunout,*)". Replaced
"stop" by "stop 1" in the case where "abort_gcm" is called with "ierr
/= 0". Removed "stop" statements at the end of procedures
"limit_netcdf" and main program "ce0l" (why not let the program end
normally?).

Made some arrays automatic instead of allocatable in "start_inter_3d".

Zeroed "wake_pe", "fm_therm", "entr_therm" and "detr_therm" in
"dyn3dpar/etat0_netcdf.F90". The parallel and sequential results of
"ce0l" are thus identical.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 3.6 KB
Line 
1!
2! $Id: ce0l.F90 1425 2010-09-02 13:45:23Z acozic $
3!
4!-------------------------------------------------------------------------------
5!
6PROGRAM ce0l
7!-------------------------------------------------------------------------------
8! Purpose: Calls etat0, creates initial states and limit_netcdf
9!
10!     interbar=.T. for barycentric interpolation inter_barxy
11!     extrap  =.T. for data extrapolation, like for the SSTs when file does not
12!                  contain ocean points only.
13!     oldice  =.T. for old-style ice, obtained using grille_m (grid_atob).
14!     masque is created in etat0, passed to limit to ensure consistancy.
15!-------------------------------------------------------------------------------
16  USE control_mod
17#ifdef CPP_EARTH
18! This prog. is designed to work for Earth
19  USE dimphy
20  USE comgeomphy
21  USE mod_phys_lmdz_para
22  USE mod_const_mpi
23  USE infotrac
24
25#ifdef CPP_IOIPSL
26  USE ioipsl, ONLY: ioconf_calendar
27#endif
28
29#endif
30  IMPLICIT NONE
31#ifndef CPP_EARTH
32  WRITE(lunout,*)'limit_netcdf: Earth-specific routine, needs Earth physics'
33#else
34!-------------------------------------------------------------------------------
35! Local variables:
36  LOGICAL, PARAMETER :: interbar=.TRUE., extrap=.FALSE., oldice=.FALSE.
37#include "dimensions.h"
38#include "paramet.h"
39#include "indicesol.h"
40#include "iniprint.h"
41#include "temps.h"
42#include "logic.h"
43  INTEGER, PARAMETER            :: longcles=20
44  REAL,    DIMENSION(longcles)  :: clesphy0
45  REAL,    DIMENSION(iip1,jjp1) :: masque
46  CHARACTER(LEN=15)             :: calnd
47!-------------------------------------------------------------------------------
48  CALL conf_gcm( 99, .TRUE. , clesphy0 )
49
50  CALL init_mpi
51
52  CALL Init_Phys_lmdz(iim,jjp1,llm,1,(/(jjm-1)*iim+2/))
53  WRITE(lunout,*)'---> klon=',klon
54  IF (mpi_size>1 .OR. omp_size>1) THEN
55       CALL abort_gcm('ce0l','In parallel mode,                         &
56 &                 ce0l must be called only                             &
57 &                 for 1 process and 1 task')
58  ENDIF
59
60  CALL InitComgeomphy
61
62#ifdef CPP_IOIPSL
63  SELECT CASE(calend)
64    CASE('earth_360d');CALL ioconf_calendar('360d');      calnd='a 360 jours/an'
65    CASE('earth_365d');CALL ioconf_calendar('noleap');    calnd='a 365 jours/an'
66    CASE('earth_366d');CALL ioconf_calendar('366d');      calnd='bissextile'
67    CASE('gregorian'); CALL ioconf_calendar('gregorian'); calnd='gregorien'
68    CASE('standard');  CALL ioconf_calendar('gregorian'); calnd='gregorien'
69    CASE('julian');    CALL ioconf_calendar('julian');    calnd='julien'
70    CASE('proleptic_gregorian'); CALL ioconf_calendar('gregorian')
71  !--- DC Bof...  => IOIPSL a mettre a jour: proleptic_gregorian /= gregorian
72    CASE DEFAULT
73      CALL abort_gcm('ce0l','Mauvais choix de calendrier',1)
74  END SELECT
75  WRITE(lunout,*)'CALENDRIER CHOISI: Terrestre '//TRIM(calnd)
76#endif
77
78  IF (config_inca /= 'none') THEN
79#ifdef INCA
80    CALL init_const_lmdz(nbtr,anneeref,dayref,iphysiq,day_step,nday)
81    CALL init_inca_para(iim,jjm+1,klon,1,klon_mpi_para_nb,0)
82    WRITE(lunout,*)'nbtr =' , nbtr
83#endif
84  END IF
85
86  WRITE(lunout,'(//)')
87  WRITE(lunout,*) '  *********************  '
88  WRITE(lunout,*) '  ***  etat0_netcdf ***  '
89  WRITE(lunout,*) '  *********************  '
90  WRITE(lunout,'(//)')
91  WRITE(lunout,*) ' interbar = ',interbar
92  CALL etat0_netcdf(interbar,masque,ok_etat0)
93
94  IF(ok_limit) THEN
95  WRITE(lunout,'(//)')
96  WRITE(lunout,*) '  *********************  '
97  WRITE(lunout,*) '  ***  Limit_netcdf ***  '
98  WRITE(lunout,*) '  *********************  '
99  WRITE(lunout,'(//)')
100  CALL limit_netcdf(interbar,extrap,oldice,masque)
101  END IF
102
103#endif
104! of #ifndef CPP_EARTH #else
105
106END PROGRAM ce0l
107!
108!-------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.