Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Blame
Revision Log

radlwsw.F90 @ 3492

Last change on this file since 3492 was 1279, checked in by Laurent Fairhead, 15 years ago
Merged LMDZ4-dev branch changes r1241:1278 into the trunk Running trunk and LMDZ4-dev in LMDZOR configuration on local machine (sequential) and SX8 (4-proc) yields identical results (restart and restartphy are identical binarily) Log history from r1241 to r1278 is available by switching to source:LMDZ4/branches/LMDZ4-dev-20091210
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 17.7 KB

Line
1	module radlwsw_m
2
3	IMPLICIT NONE
4
5	contains
6
7	SUBROUTINE radlwsw( &
8	dist, rmu0, fract, &
9	paprs, pplay,tsol,alb1, alb2, &
10	t,q,wo,&
11	cldfra, cldemi, cldtaupd,&
12	ok_ade, ok_aie,&
13	tau_aero, piz_aero, cg_aero,&
14	cldtaupi, new_aod, &
15	qsat, flwc, fiwc, &
16	heat,heat0,cool,cool0,radsol,albpla,&
17	topsw,toplw,solsw,sollw,&
18	sollwdown,&
19	topsw0,toplw0,solsw0,sollw0,&
20	lwdn0, lwdn, lwup0, lwup,&
21	swdn0, swdn, swup0, swup,&
22	topswad_aero, solswad_aero,&
23	topswai_aero, solswai_aero, &
24	topswad0_aero, solswad0_aero,&
25	topsw_aero, topsw0_aero,&
26	solsw_aero, solsw0_aero, &
27	topswcf_aero, solswcf_aero)
28
29
30
31	USE DIMPHY
32	use assert_m, only: assert
33
34	!======================================================================
35	! Auteur(s): Z.X. Li (LMD/CNRS) date: 19960719
36	! Objet: interface entre le modele et les rayonnements
37	! Arguments:
38	! dist-----input-R- distance astronomique terre-soleil
39	! rmu0-----input-R- cosinus de l'angle zenithal
40	! fract----input-R- duree d'ensoleillement normalisee
41	! co2_ppm--input-R- concentration du gaz carbonique (en ppm)
42	! paprs----input-R- pression a inter-couche (Pa)
43	! pplay----input-R- pression au milieu de couche (Pa)
44	! tsol-----input-R- temperature du sol (en K)
45	! alb1-----input-R- albedo du sol(entre 0 et 1) dans l'interval visible
46	! alb2-----input-R- albedo du sol(entre 0 et 1) dans l'interval proche infra-rouge
47	! t--------input-R- temperature (K)
48	! q--------input-R- vapeur d'eau (en kg/kg)
49	! cldfra---input-R- fraction nuageuse (entre 0 et 1)
50	! cldtaupd---input-R- epaisseur optique des nuages dans le visible (present-day value)
51	! cldemi---input-R- emissivite des nuages dans l'IR (entre 0 et 1)
52	! ok_ade---input-L- apply the Aerosol Direct Effect or not?
53	! ok_aie---input-L- apply the Aerosol Indirect Effect or not?
54	! tau_ae, piz_ae, cg_ae-input-R- aerosol optical properties (calculated in aeropt.F)
55	! cldtaupi-input-R- epaisseur optique des nuages dans le visible
56	! calculated for pre-industrial (pi) aerosol concentrations, i.e. with smaller
57	! droplet concentration, thus larger droplets, thus generally cdltaupi cldtaupd
58	! it is needed for the diagnostics of the aerosol indirect radiative forcing
59	!
60	! heat-----output-R- echauffement atmospherique (visible) (K/jour)
61	! cool-----output-R- refroidissement dans l'IR (K/jour)
62	! radsol---output-R- bilan radiatif net au sol (W/m**2) (+ vers le bas)
63	! albpla---output-R- albedo planetaire (entre 0 et 1)
64	! topsw----output-R- flux solaire net au sommet de l'atm.
65	! toplw----output-R- ray. IR montant au sommet de l'atmosphere
66	! solsw----output-R- flux solaire net a la surface
67	! sollw----output-R- ray. IR montant a la surface
68	! solswad---output-R- ray. solaire net absorbe a la surface (aerosol dir)
69	! topswad---output-R- ray. solaire absorbe au sommet de l'atm. (aerosol dir)
70	! solswai---output-R- ray. solaire net absorbe a la surface (aerosol ind)
71	! topswai---output-R- ray. solaire absorbe au sommet de l'atm. (aerosol ind)
72	!
73	! ATTENTION: swai and swad have to be interpreted in the following manner:
74	! ---------
75	! ok_ade=F & ok_aie=F -both are zero
76	! ok_ade=T & ok_aie=F -aerosol direct forcing is F_{AD} = topsw-topswad
77	! indirect is zero
78	! ok_ade=F & ok_aie=T -aerosol indirect forcing is F_{AI} = topsw-topswai
79	! direct is zero
80	! ok_ade=T & ok_aie=T -aerosol indirect forcing is F_{AI} = topsw-topswai
81	! aerosol direct forcing is F_{AD} = topswai-topswad
82	!
83
84	!======================================================================
85
86	! ====================================================================
87	! Adapte au modele de chimie INCA par Celine Deandreis & Anne Cozic -- 2009
88	! 1 = ZERO
89	! 2 = AER total
90	! 3 = NAT
91	! 4 = BC
92	! 5 = SO4
93	! 6 = POM
94	! 7 = DUST
95	! 8 = SS
96	! 9 = NO3
97	!
98	! ====================================================================
99	include "YOETHF.h"
100	include "YOMCST.h"
101	include "clesphys.h"
102	include "iniprint.h"
103
104	! Input arguments
105	REAL, INTENT(in) :: dist
106	REAL, INTENT(in) :: rmu0(KLON), fract(KLON)
107	REAL, INTENT(in) :: paprs(KLON,KLEV+1), pplay(KLON,KLEV)
108	REAL, INTENT(in) :: alb1(KLON), alb2(KLON), tsol(KLON)
109	REAL, INTENT(in) :: t(KLON,KLEV), q(KLON,KLEV)
110
111	REAL, INTENT(in):: wo(:, :, :) ! dimension(KLON,KLEV, 1 or 2)
112	! column-density of ozone in a layer, in kilo-Dobsons
113	! "wo(:, :, 1)" is for the average day-night field,
114	! "wo(:, :, 2)" is for daylight time.
115
116	LOGICAL, INTENT(in) :: ok_ade, ok_aie ! switches whether to use aerosol direct (indirect) effects or not
117	REAL, INTENT(in) :: cldfra(KLON,KLEV), cldemi(KLON,KLEV), cldtaupd(KLON,KLEV)
118	REAL, INTENT(in) :: tau_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
119	REAL, INTENT(in) :: piz_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
120	REAL, INTENT(in) :: cg_aero(KLON,KLEV,9,2) ! aerosol optical properties (see aeropt.F)
121	REAL, INTENT(in) :: cldtaupi(KLON,KLEV) ! cloud optical thickness for pre-industrial aerosol concentrations
122	LOGICAL, INTENT(in) :: new_aod ! flag pour retrouver les resultats exacts de l'AR4 dans le cas ou l'on ne travaille qu'avec les sulfates
123	REAL, INTENT(in) :: qsat(klon,klev) ! Variable pour iflag_rrtm=1
124	REAL, INTENT(in) :: flwc(klon,klev) ! Variable pour iflag_rrtm=1
125	REAL, INTENT(in) :: fiwc(klon,klev) ! Variable pour iflag_rrtm=1
126
127	! Output arguments
128	REAL, INTENT(out) :: heat(KLON,KLEV), cool(KLON,KLEV)
129	REAL, INTENT(out) :: heat0(KLON,KLEV), cool0(KLON,KLEV)
130	REAL, INTENT(out) :: radsol(KLON), topsw(KLON), toplw(KLON)
131	REAL, INTENT(out) :: solsw(KLON), sollw(KLON), albpla(KLON)
132	REAL, INTENT(out) :: topsw0(KLON), toplw0(KLON), solsw0(KLON), sollw0(KLON)
133	REAL, INTENT(out) :: sollwdown(KLON)
134	REAL, INTENT(out) :: swdn(KLON,kflev+1),swdn0(KLON,kflev+1)
135	REAL, INTENT(out) :: swup(KLON,kflev+1),swup0(KLON,kflev+1)
136	REAL, INTENT(out) :: lwdn(KLON,kflev+1),lwdn0(KLON,kflev+1)
137	REAL, INTENT(out) :: lwup(KLON,kflev+1),lwup0(KLON,kflev+1)
138	REAL, INTENT(out) :: topswad_aero(KLON), solswad_aero(KLON) ! output: aerosol direct forcing at TOA and surface
139	REAL, INTENT(out) :: topswai_aero(KLON), solswai_aero(KLON) ! output: aerosol indirect forcing atTOA and surface
140	REAL, DIMENSION(klon), INTENT(out) :: topswad0_aero
141	REAL, DIMENSION(klon), INTENT(out) :: solswad0_aero
142	REAL, DIMENSION(kdlon,9), INTENT(out) :: topsw_aero
143	REAL, DIMENSION(kdlon,9), INTENT(out) :: topsw0_aero
144	REAL, DIMENSION(kdlon,9), INTENT(out) :: solsw_aero
145	REAL, DIMENSION(kdlon,9), INTENT(out) :: solsw0_aero
146	REAL, DIMENSION(kdlon,3), INTENT(out) :: topswcf_aero
147	REAL, DIMENSION(kdlon,3), INTENT(out) :: solswcf_aero
148
149	! Local variables
150	REAL(KIND=8) ZFSUP(KDLON,KFLEV+1)
151	REAL(KIND=8) ZFSDN(KDLON,KFLEV+1)
152	REAL(KIND=8) ZFSUP0(KDLON,KFLEV+1)
153	REAL(KIND=8) ZFSDN0(KDLON,KFLEV+1)
154	REAL(KIND=8) ZFLUP(KDLON,KFLEV+1)
155	REAL(KIND=8) ZFLDN(KDLON,KFLEV+1)
156	REAL(KIND=8) ZFLUP0(KDLON,KFLEV+1)
157	REAL(KIND=8) ZFLDN0(KDLON,KFLEV+1)
158	REAL(KIND=8) zx_alpha1, zx_alpha2
159	INTEGER k, kk, i, j, iof, nb_gr
160	REAL(KIND=8) PSCT
161	REAL(KIND=8) PALBD(kdlon,2), PALBP(kdlon,2)
162	REAL(KIND=8) PEMIS(kdlon), PDT0(kdlon), PVIEW(kdlon)
163	REAL(KIND=8) PPSOL(kdlon), PDP(kdlon,KLEV)
164	REAL(KIND=8) PTL(kdlon,kflev+1), PPMB(kdlon,kflev+1)
165	REAL(KIND=8) PTAVE(kdlon,kflev)
166	REAL(KIND=8) PWV(kdlon,kflev), PQS(kdlon,kflev)
167
168	real(kind=8) POZON(kdlon, kflev, size(wo, 3)) ! mass fraction of ozone
169	! "POZON(:, :, 1)" is for the average day-night field,
170	! "POZON(:, :, 2)" is for daylight time.
171
172	REAL(KIND=8) PAER(kdlon,kflev,5)
173	REAL(KIND=8) PCLDLD(kdlon,kflev)
174	REAL(KIND=8) PCLDLU(kdlon,kflev)
175	REAL(KIND=8) PCLDSW(kdlon,kflev)
176	REAL(KIND=8) PTAU(kdlon,2,kflev)
177	REAL(KIND=8) POMEGA(kdlon,2,kflev)
178	REAL(KIND=8) PCG(kdlon,2,kflev)
179	REAL(KIND=8) zfract(kdlon), zrmu0(kdlon), zdist
180	REAL(KIND=8) zheat(kdlon,kflev), zcool(kdlon,kflev)
181	REAL(KIND=8) zheat0(kdlon,kflev), zcool0(kdlon,kflev)
182	REAL(KIND=8) ztopsw(kdlon), ztoplw(kdlon)
183	REAL(KIND=8) zsolsw(kdlon), zsollw(kdlon), zalbpla(kdlon)
184	REAL(KIND=8) zsollwdown(kdlon)
185	REAL(KIND=8) ztopsw0(kdlon), ztoplw0(kdlon)
186	REAL(KIND=8) zsolsw0(kdlon), zsollw0(kdlon)
187	REAL(KIND=8) zznormcp
188	REAL(KIND=8) tauaero(kdlon,kflev,9,2) ! aer opt properties
189	REAL(KIND=8) pizaero(kdlon,kflev,9,2)
190	REAL(KIND=8) cgaero(kdlon,kflev,9,2)
191	REAL(KIND=8) PTAUA(kdlon,2,kflev) ! present-day value of cloud opt thickness (PTAU is pre-industrial value), local use
192	REAL(KIND=8) POMEGAA(kdlon,2,kflev) ! dito for single scatt albedo
193	REAL(KIND=8) ztopswadaero(kdlon), zsolswadaero(kdlon) ! Aerosol direct forcing at TOAand surface
194	REAL(KIND=8) ztopswad0aero(kdlon), zsolswad0aero(kdlon) ! Aerosol direct forcing at TOAand surface
195	REAL(KIND=8) ztopswaiaero(kdlon), zsolswaiaero(kdlon) ! dito, indirect
196	REAL(KIND=8) ztopsw_aero(kdlon,9), ztopsw0_aero(kdlon,9)
197	REAL(KIND=8) zsolsw_aero(kdlon,9), zsolsw0_aero(kdlon,9)
198	REAL(KIND=8) ztopswcf_aero(kdlon,3), zsolswcf_aero(kdlon,3)
199	real, parameter:: dobson_u = 2.1415e-05 ! Dobson unit, in kg m-2
200
201	call assert(size(wo, 1) == klon, size(wo, 2) == klev, "radlwsw wo")
202	! initialisation
203	tauaero(:,:,:,:)=0.
204	pizaero(:,:,:,:)=0.
205	cgaero(:,:,:,:)=0.
206
207	!
208	!-------------------------------------------
209	nb_gr = KLON / kdlon
210	IF (nb_gr*kdlon .NE. KLON) THEN
211	PRINT*, "kdlon mauvais:", KLON, kdlon, nb_gr
212	CALL abort
213	ENDIF
214	IF (kflev .NE. KLEV) THEN
215	PRINT*, "kflev differe de KLEV, kflev, KLEV"
216	CALL abort
217	ENDIF
218	!-------------------------------------------
219	DO k = 1, KLEV
220	DO i = 1, KLON
221	heat(i,k)=0.
222	cool(i,k)=0.
223	heat0(i,k)=0.
224	cool0(i,k)=0.
225	ENDDO
226	ENDDO
227	!
228	zdist = dist
229	!
230	PSCT = solaire/zdist/zdist
231	DO j = 1, nb_gr
232	iof = kdlon*(j-1)
233	DO i = 1, kdlon
234	zfract(i) = fract(iof+i)
235	zrmu0(i) = rmu0(iof+i)
236	PALBD(i,1) = alb1(iof+i)
237	PALBD(i,2) = alb2(iof+i)
238	PALBP(i,1) = alb1(iof+i)
239	PALBP(i,2) = alb2(iof+i)
240	PEMIS(i) = 1.0
241	PVIEW(i) = 1.66
242	PPSOL(i) = paprs(iof+i,1)
243	zx_alpha1 = (paprs(iof+i,1)-pplay(iof+i,2))/(pplay(iof+i,1)-pplay(iof+i,2))
244	zx_alpha2 = 1.0 - zx_alpha1
245	PTL(i,1) = t(iof+i,1) * zx_alpha1 + t(iof+i,2) * zx_alpha2
246	PTL(i,KLEV+1) = t(iof+i,KLEV)
247	PDT0(i) = tsol(iof+i) - PTL(i,1)
248	ENDDO
249	DO k = 2, kflev
250	DO i = 1, kdlon
251	PTL(i,k) = (t(iof+i,k)+t(iof+i,k-1))*0.5
252	ENDDO
253	ENDDO
254	DO k = 1, kflev
255	DO i = 1, kdlon
256	PDP(i,k) = paprs(iof+i,k)-paprs(iof+i,k+1)
257	PTAVE(i,k) = t(iof+i,k)
258	PWV(i,k) = MAX (q(iof+i,k), 1.0e-12)
259	PQS(i,k) = PWV(i,k)
260	POZON(i,k, :) = wo(iof+i, k, :) * RG * dobson_u * 1e3 &
261	/ (paprs(iof+i, k) - paprs(iof+i, k+1))
262	PCLDLD(i,k) = cldfra(iof+i,k)*cldemi(iof+i,k)
263	PCLDLU(i,k) = cldfra(iof+i,k)*cldemi(iof+i,k)
264	PCLDSW(i,k) = cldfra(iof+i,k)
265	PTAU(i,1,k) = MAX(cldtaupi(iof+i,k), 1.0e-05)! 1e-12 serait instable
266	PTAU(i,2,k) = MAX(cldtaupi(iof+i,k), 1.0e-05)! pour 32-bit machines
267	POMEGA(i,1,k) = 0.9999 - 5.0e-04 * EXP(-0.5 * PTAU(i,1,k))
268	POMEGA(i,2,k) = 0.9988 - 2.5e-03 * EXP(-0.05 * PTAU(i,2,k))
269	PCG(i,1,k) = 0.865
270	PCG(i,2,k) = 0.910
271	!-
272	! Introduced for aerosol indirect forcings.
273	! The following values use the cloud optical thickness calculated from
274	! present-day aerosol concentrations whereas the quantities without the
275	! "A" at the end are for pre-industial (natural-only) aerosol concentrations
276	!
277	PTAUA(i,1,k) = MAX(cldtaupd(iof+i,k), 1.0e-05)! 1e-12 serait instable
278	PTAUA(i,2,k) = MAX(cldtaupd(iof+i,k), 1.0e-05)! pour 32-bit machines
279	POMEGAA(i,1,k) = 0.9999 - 5.0e-04 * EXP(-0.5 * PTAUA(i,1,k))
280	POMEGAA(i,2,k) = 0.9988 - 2.5e-03 * EXP(-0.05 * PTAUA(i,2,k))
281	ENDDO
282	ENDDO
283	!
284	DO k = 1, kflev+1
285	DO i = 1, kdlon
286	PPMB(i,k) = paprs(iof+i,k)/100.0
287	ENDDO
288	ENDDO
289	!
290	DO kk = 1, 5
291	DO k = 1, kflev
292	DO i = 1, kdlon
293	PAER(i,k,kk) = 1.0E-15
294	ENDDO
295	ENDDO
296	ENDDO
297	DO k = 1, kflev
298	DO i = 1, kdlon
299	tauaero(i,k,:,1)=tau_aero(iof+i,k,:,1)
300	pizaero(i,k,:,1)=piz_aero(iof+i,k,:,1)
301	cgaero(i,k,:,1) =cg_aero(iof+i,k,:,1)
302	tauaero(i,k,:,2)=tau_aero(iof+i,k,:,2)
303	pizaero(i,k,:,2)=piz_aero(iof+i,k,:,2)
304	cgaero(i,k,:,2) =cg_aero(iof+i,k,:,2)
305	ENDDO
306	ENDDO
307
308	!
309	!===== iflag_rrtm ================================================
310	!
311	IF (iflag_rrtm == 0) THEN
312	! Old radiation scheme, used for AR4 runs
313	! average day-night ozone for longwave
314	CALL LW_LMDAR4(&
315	PPMB, PDP,&
316	PPSOL,PDT0,PEMIS,&
317	PTL, PTAVE, PWV, POZON(:, :, 1), PAER,&
318	PCLDLD,PCLDLU,&
319	PVIEW,&
320	zcool, zcool0,&
321	ztoplw,zsollw,ztoplw0,zsollw0,&
322	zsollwdown,&
323	ZFLUP, ZFLDN, ZFLUP0,ZFLDN0)
324
325	! daylight ozone, if we have it, for short wave
326	IF (.NOT. new_aod) THEN
327	! use old version
328	CALL SW_LMDAR4(PSCT, zrmu0, zfract,&
329	PPMB, PDP, &
330	PPSOL, PALBD, PALBP,&
331	PTAVE, PWV, PQS, POZON(:, :, size(wo, 3)), PAER,&
332	PCLDSW, PTAU, POMEGA, PCG,&
333	zheat, zheat0,&
334	zalbpla,ztopsw,zsolsw,ztopsw0,zsolsw0,&
335	ZFSUP,ZFSDN,ZFSUP0,ZFSDN0,&
336	tau_aero(:,:,5,:), piz_aero(:,:,5,:), cg_aero(:,:,5,:),&
337	PTAUA, POMEGAA,&
338	ztopswadaero,zsolswadaero,&
339	ztopswaiaero,zsolswaiaero,&
340	ok_ade, ok_aie)
341
342	ELSE ! new_aod=T
343	CALL SW_AEROAR4(PSCT, zrmu0, zfract,&
344	PPMB, PDP,&
345	PPSOL, PALBD, PALBP,&
346	PTAVE, PWV, PQS, POZON(:, :, size(wo, 3)), PAER,&
347	PCLDSW, PTAU, POMEGA, PCG,&
348	zheat, zheat0,&
349	zalbpla,ztopsw,zsolsw,ztopsw0,zsolsw0,&
350	ZFSUP,ZFSDN,ZFSUP0,ZFSDN0,&
351	tauaero, pizaero, cgaero, &
352	PTAUA, POMEGAA,&
353	ztopswadaero,zsolswadaero,&
354	ztopswad0aero,zsolswad0aero,&
355	ztopswaiaero,zsolswaiaero, &
356	ztopsw_aero,ztopsw0_aero,&
357	zsolsw_aero,zsolsw0_aero,&
358	ztopswcf_aero,zsolswcf_aero, &
359	ok_ade, ok_aie)
360
361	ENDIF
362
363	ELSE
364	!===== iflag_rrtm=1, on passe dans SW via RECMWFL ===============
365	WRITE(lunout,*) "Option iflag_rrtm=T ne fonctionne pas encore !!!"
366	CALL abort_gcm('radlwsw','iflag_rrtm=T not valid',1)
367
368	ENDIF ! iflag_rrtm
369	!======================================================================
370
371	DO i = 1, kdlon
372	radsol(iof+i) = zsolsw(i) + zsollw(i)
373	topsw(iof+i) = ztopsw(i)
374	toplw(iof+i) = ztoplw(i)
375	solsw(iof+i) = zsolsw(i)
376	sollw(iof+i) = zsollw(i)
377	sollwdown(iof+i) = zsollwdown(i)
378	DO k = 1, kflev+1
379	lwdn0 ( iof+i,k) = ZFLDN0 ( i,k)
380	lwdn ( iof+i,k) = ZFLDN ( i,k)
381	lwup0 ( iof+i,k) = ZFLUP0 ( i,k)
382	lwup ( iof+i,k) = ZFLUP ( i,k)
383	ENDDO
384	topsw0(iof+i) = ztopsw0(i)
385	toplw0(iof+i) = ztoplw0(i)
386	solsw0(iof+i) = zsolsw0(i)
387	sollw0(iof+i) = zsollw0(i)
388	albpla(iof+i) = zalbpla(i)
389
390	DO k = 1, kflev+1
391	swdn0 ( iof+i,k) = ZFSDN0 ( i,k)
392	swdn ( iof+i,k) = ZFSDN ( i,k)
393	swup0 ( iof+i,k) = ZFSUP0 ( i,k)
394	swup ( iof+i,k) = ZFSUP ( i,k)
395	ENDDO
396	ENDDO
397	!-transform the aerosol forcings, if they have
398	! to be calculated
399	IF (ok_ade) THEN
400	DO i = 1, kdlon
401	topswad_aero(iof+i) = ztopswadaero(i)
402	topswad0_aero(iof+i) = ztopswad0aero(i)
403	solswad_aero(iof+i) = zsolswadaero(i)
404	solswad0_aero(iof+i) = zsolswad0aero(i)
405	! MS the following lines seem to be wrong, why is iof on right hand side???
406	! topsw_aero(iof+i,:) = ztopsw_aero(iof+i,:)
407	! topsw0_aero(iof+i,:) = ztopsw0_aero(iof+i,:)
408	! solsw_aero(iof+i,:) = zsolsw_aero(iof+i,:)
409	! solsw0_aero(iof+i,:) = zsolsw0_aero(iof+i,:)
410	topsw_aero(iof+i,:) = ztopsw_aero(i,:)
411	topsw0_aero(iof+i,:) = ztopsw0_aero(i,:)
412	solsw_aero(iof+i,:) = zsolsw_aero(i,:)
413	solsw0_aero(iof+i,:) = zsolsw0_aero(i,:)
414	topswcf_aero(iof+i,:) = ztopswcf_aero(i,:)
415	solswcf_aero(iof+i,:) = zsolswcf_aero(i,:)
416	ENDDO
417	ELSE
418	DO i = 1, kdlon
419	topswad_aero(iof+i) = 0.0
420	solswad_aero(iof+i) = 0.0
421	topswad0_aero(iof+i) = 0.0
422	solswad0_aero(iof+i) = 0.0
423	topsw_aero(iof+i,:) = 0.
424	topsw0_aero(iof+i,:) =0.
425	solsw_aero(iof+i,:) = 0.
426	solsw0_aero(iof+i,:) = 0.
427	ENDDO
428	ENDIF
429	IF (ok_aie) THEN
430	DO i = 1, kdlon
431	topswai_aero(iof+i) = ztopswaiaero(i)
432	solswai_aero(iof+i) = zsolswaiaero(i)
433	ENDDO
434	ELSE
435	DO i = 1, kdlon
436	topswai_aero(iof+i) = 0.0
437	solswai_aero(iof+i) = 0.0
438	ENDDO
439	ENDIF
440	DO k = 1, kflev
441	DO i = 1, kdlon
442	! scale factor to take into account the difference between
443	! dry air and watter vapour scpecifi! heat capacity
444	zznormcp=1.0+RVTMP2*PWV(i,k)
445	heat(iof+i,k) = zheat(i,k)/zznormcp
446	cool(iof+i,k) = zcool(i,k)/zznormcp
447	heat0(iof+i,k) = zheat0(i,k)/zznormcp
448	cool0(iof+i,k) = zcool0(i,k)/zznormcp
449	ENDDO
450	ENDDO
451
452	ENDDO ! j = 1, nb_gr
453
454	END SUBROUTINE radlwsw
455
456	end module radlwsw_m

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format