Context Navigation

phyetat0.F @ 4995

Last change on this file since 4995 was 1322, checked in by Laurent Fairhead, 15 years ago

Improvements concerning wake parametrisation (from JYG, NR, IT, with more to come).
Alp_offset is read in form physiq.def file

Améliorations à la paramétrisation des poches froides (de JYG, NR, IT, d'autres
sont à venir)
Alp_offset est rajouté à la liste des paramètres lus dans physiq.def

Property svn:eol-style set to native
Property svn:keywords set to Author Date Id Revision

File size: 30.6 KB

Line
1	!
2	! $Id: phyetat0.F 1322 2010-03-12 10:54:11Z abarral $
3	!
4	c
5	c
6	SUBROUTINE phyetat0 (fichnom,
7	. clesphy0,
8	. tabcntr0)
9
10	USE dimphy
11	USE mod_grid_phy_lmdz
12	USE mod_phys_lmdz_para
13	USE iophy
14	USE ocean_cpl_mod, ONLY : ocean_cpl_init
15	USE fonte_neige_mod, ONLY : fonte_neige_init
16	USE pbl_surface_mod, ONLY : pbl_surface_init
17	USE surface_data, ONLY : type_ocean
18	USE phys_state_var_mod
19	USE iostart
20	USE write_field_phy
21	USE infotrac
22	USE traclmdz_mod, ONLY : traclmdz_from_restart
23	USE carbon_cycle_mod,ONLY : carbon_cycle_tr, carbon_cycle_cpl
24
25	IMPLICIT none
26	c======================================================================
27	c Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818
28	c Objet: Lecture de l'etat initial pour la physique
29	c======================================================================
30	#include "dimensions.h"
31	#include "netcdf.inc"
32	#include "indicesol.h"
33	#include "dimsoil.h"
34	#include "clesphys.h"
35	#include "temps.h"
36	#include "thermcell.h"
37	#include "compbl.h"
38	c======================================================================
39	CHARACTER() fichnom
40
41	c les variables globales lues dans le fichier restart
42
43	REAL tsoil(klon,nsoilmx,nbsrf)
44	REAL tslab(klon), seaice(klon)
45	REAL qsurf(klon,nbsrf)
46	REAL qsol(klon)
47	REAL snow(klon,nbsrf)
48	REAL evap(klon,nbsrf)
49	real fder(klon)
50	REAL frugs(klon,nbsrf)
51	REAL agesno(klon,nbsrf)
52	REAL run_off_lic_0(klon)
53	REAL fractint(klon)
54	REAL trs(klon,nbtr)
55
56	CHARACTER*6 ocean_in
57	LOGICAL ok_veget_in
58
59	INTEGER longcles
60	PARAMETER ( longcles = 20 )
61	REAL clesphy0( longcles )
62	c
63	REAL xmin, xmax
64	c
65	INTEGER nid, nvarid
66	INTEGER ierr, i, nsrf, isoil ,k
67	INTEGER length
68	PARAMETER (length=100)
69	INTEGER it, iiq
70	REAL tab_cntrl(length), tabcntr0(length)
71	CHARACTER*7 str7
72	CHARACTER*2 str2
73	LOGICAL :: found
74
75	c FH1D
76	c real iolat(jjm+1)
77	real iolat(jjm+1-1/iim)
78	c
79	c Ouvrir le fichier contenant l'etat initial:
80	c
81
82
83	CALL open_startphy(fichnom)
84
85
86	c
87	c Lecture des parametres de controle:
88	c
89	CALL get_var("controle",tab_cntrl)
90
91	c
92	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
93	! FH 2008/05/09 On elimine toutes les clefs physiques dans la dynamique
94	! Les constantes de la physiques sont lues dans la physique seulement.
95	! Les egalites du type
96	! tab_cntrl( 5 )=clesphy0(1)
97	! sont remplacees par
98	! clesphy0(1)=tab_cntrl( 5 )
99	! On inverse aussi la logique.
100	! On remplit les tab_cntrl avec les parametres lus dans les .def
101	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
102
103	DO i = 1, length
104	tabcntr0( i ) = tab_cntrl( i )
105	ENDDO
106	c
107	tab_cntrl(1)=dtime
108	tab_cntrl(2)=radpas
109
110	c co2_ppm : value from the previous time step
111	IF (carbon_cycle_tr .OR. carbon_cycle_cpl) THEN
112	co2_ppm = tab_cntrl(3)
113	RCO2 = co2_ppm * 1.0e-06 * 44.011/28.97
114	c ELSE : keep value from .def
115	END IF
116
117	c co2_ppm0 : initial value of atmospheric CO2 (from create_etat0_limit.e .def)
118	co2_ppm0 = tab_cntrl(16)
119
120	solaire_etat0 = tab_cntrl(4)
121	tab_cntrl(5)=iflag_con
122	tab_cntrl(6)=nbapp_rad
123
124	if (cycle_diurne) tab_cntrl( 7) =1.
125	if (soil_model) tab_cntrl( 8) =1.
126	if (new_oliq) tab_cntrl( 9) =1.
127	if (ok_orodr) tab_cntrl(10) =1.
128	if (ok_orolf) tab_cntrl(11) =1.
129	if (ok_limitvrai) tab_cntrl(12) =1.
130
131
132	itau_phy = tab_cntrl(15)
133
134
135
136	IF( clesphy0(1).NE.tab_cntrl( 5 ) ) THEN
137	clesphy0(1)=tab_cntrl( 5 )
138	ENDIF
139
140	IF( clesphy0(2).NE.tab_cntrl( 6 ) ) THEN
141	clesphy0(2)=tab_cntrl( 6 )
142	ENDIF
143
144	IF( clesphy0(3).NE.tab_cntrl( 7 ) ) THEN
145	clesphy0(3)=tab_cntrl( 7 )
146	ENDIF
147
148	IF( clesphy0(4).NE.tab_cntrl( 8 ) ) THEN
149	clesphy0(4)=tab_cntrl( 8 )
150	ENDIF
151
152	IF( clesphy0(5).NE.tab_cntrl( 9 ) ) THEN
153	clesphy0(5)=tab_cntrl( 9 )
154	ENDIF
155
156	IF( clesphy0(6).NE.tab_cntrl( 10 ) ) THEN
157	clesphy0(6)=tab_cntrl( 10 )
158	ENDIF
159
160	IF( clesphy0(7).NE.tab_cntrl( 11 ) ) THEN
161	clesphy0(7)=tab_cntrl( 11 )
162	ENDIF
163
164	IF( clesphy0(8).NE.tab_cntrl( 12 ) ) THEN
165	clesphy0(8)=tab_cntrl( 12 )
166	ENDIF
167
168
169	c
170	c Lecture des latitudes (coordonnees):
171	c
172	CALL get_field("latitude",rlat)
173
174	c
175	c Lecture des longitudes (coordonnees):
176	c
177	CALL get_field("longitude",rlon)
178
179	C
180	C
181	C Lecture du masque terre mer
182	C
183	CALL get_field("masque",zmasq,found)
184	IF (.NOT. found) THEN
185	PRINT*, 'phyetat0: Le champ <masque> est absent'
186	PRINT *, 'fichier startphy non compatible avec phyetat0'
187	ENDIF
188
189
190	C Lecture des fractions pour chaque sous-surface
191	C
192	C initialisation des sous-surfaces
193	C
194	pctsrf = 0.
195	C
196	C fraction de terre
197	C
198
199	CALL get_field("FTER",pctsrf(:,is_ter),found)
200	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FTER> est absent'
201
202	C
203	C fraction de glace de terre
204	C
205	CALL get_field("FLIC",pctsrf(:,is_lic),found)
206	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FLIC> est absent'
207
208	C
209	C fraction d'ocean
210	C
211	CALL get_field("FOCE",pctsrf(:,is_oce),found)
212	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FOCE> est absent'
213
214	C
215	C fraction glace de mer
216	C
217	CALL get_field("FSIC",pctsrf(:,is_sic),found)
218	IF (.NOT. found) PRINT*, 'phyetat0: Le champ <FSIC> est absent'
219
220	C
221	C Verification de l'adequation entre le masque et les sous-surfaces
222	C
223	fractint( 1 : klon) = pctsrf(1 : klon, is_ter)
224	$ + pctsrf(1 : klon, is_lic)
225	DO i = 1 , klon
226	IF ( abs(fractint(i) - zmasq(i) ) .GT. EPSFRA ) THEN
227	WRITE(,) 'phyetat0: attention fraction terre pas ',
228	$ 'coherente ', i, zmasq(i), pctsrf(i, is_ter)
229	$ ,pctsrf(i, is_lic)
230	WRITE(,) 'Je force la coherence zmasq=fractint'
231	zmasq(i) = fractint(i)
232	ENDIF
233	END DO
234	fractint (1 : klon) = pctsrf(1 : klon, is_oce)
235	$ + pctsrf(1 : klon, is_sic)
236	DO i = 1 , klon
237	IF ( abs( fractint(i) - (1. - zmasq(i))) .GT. EPSFRA ) THEN
238	WRITE(,) 'phyetat0 attention fraction ocean pas ',
239	$ 'coherente ', i, zmasq(i) , pctsrf(i, is_oce)
240	$ ,pctsrf(i, is_sic)
241	WRITE(,) 'Je force la coherence zmasq=fractint'
242	zmasq(i) = fractint(i)
243	ENDIF
244	END DO
245
246	C
247	c Lecture des temperatures du sol:
248	c
249
250	CALL get_field("TS",ftsol(:,1),found)
251	IF (.NOT. found) THEN
252	PRINT*, 'phyetat0: Le champ <TS> est absent'
253	PRINT, ' Mais je vais essayer de lire TS*'
254	DO nsrf = 1, nbsrf
255	IF (nsrf.GT.99) THEN
256	PRINT*, "Trop de sous-mailles"
257	CALL abort
258	ENDIF
259	WRITE(str2,'(i2.2)') nsrf
260	CALL get_field("TS"//str2,ftsol(:,nsrf))
261
262	xmin = 1.0E+20
263	xmax = -1.0E+20
264	DO i = 1, klon
265	xmin = MIN(ftsol(i,nsrf),xmin)
266	xmax = MAX(ftsol(i,nsrf),xmax)
267	ENDDO
268	PRINT,'Temperature du sol TS*:', nsrf, xmin, xmax
269	ENDDO
270	ELSE
271	PRINT*, 'phyetat0: Le champ <TS> est present'
272	PRINT, ' J ignore donc les autres temperatures TS*'
273	xmin = 1.0E+20
274	xmax = -1.0E+20
275	DO i = 1, klon
276	xmin = MIN(ftsol(i,1),xmin)
277	xmax = MAX(ftsol(i,1),xmax)
278	ENDDO
279	PRINT*,'Temperature du sol <TS>', xmin, xmax
280	DO nsrf = 2, nbsrf
281	DO i = 1, klon
282	ftsol(i,nsrf) = ftsol(i,1)
283	ENDDO
284	ENDDO
285	ENDIF
286
287	c
288	c Lecture des temperatures du sol profond:
289	c
290	DO nsrf = 1, nbsrf
291	DO isoil=1, nsoilmx
292	IF (isoil.GT.99 .AND. nsrf.GT.99) THEN
293	PRINT*, "Trop de couches ou sous-mailles"
294	CALL abort
295	ENDIF
296	WRITE(str7,'(i2.2,"srf",i2.2)') isoil, nsrf
297
298	CALL get_field('Tsoil'//str7,tsoil(:,isoil,nsrf),found)
299	IF (.NOT. found) THEN
300	PRINT*, "phyetat0: Le champ <Tsoil"//str7//"> est absent"
301	PRINT*, " Il prend donc la valeur de surface"
302	DO i=1, klon
303	tsoil(i,isoil,nsrf)=ftsol(i,nsrf)
304	ENDDO
305	ENDIF
306	ENDDO
307	ENDDO
308	c
309	c Lecture de l'humidite de l'air juste au dessus du sol:
310	c
311
312	CALL get_field("QS",qsurf(:,1),found)
313	IF (.NOT. found) THEN
314	PRINT*, 'phyetat0: Le champ <QS> est absent'
315	PRINT, ' Mais je vais essayer de lire QS*'
316	DO nsrf = 1, nbsrf
317	IF (nsrf.GT.99) THEN
318	PRINT*, "Trop de sous-mailles"
319	CALL abort
320	ENDIF
321	WRITE(str2,'(i2.2)') nsrf
322	CALL get_field("QS"//str2,qsurf(:,nsrf))
323	xmin = 1.0E+20
324	xmax = -1.0E+20
325	DO i = 1, klon
326	xmin = MIN(qsurf(i,nsrf),xmin)
327	xmax = MAX(qsurf(i,nsrf),xmax)
328	ENDDO
329	PRINT,'Humidite pres du sol QS*:', nsrf, xmin, xmax
330	ENDDO
331	ELSE
332	PRINT*, 'phyetat0: Le champ <QS> est present'
333	PRINT, ' J ignore donc les autres humidites QS*'
334	xmin = 1.0E+20
335	xmax = -1.0E+20
336	DO i = 1, klon
337	xmin = MIN(qsurf(i,1),xmin)
338	xmax = MAX(qsurf(i,1),xmax)
339	ENDDO
340	PRINT*,'Humidite pres du sol <QS>', xmin, xmax
341	DO nsrf = 2, nbsrf
342	DO i = 1, klon
343	qsurf(i,nsrf) = qsurf(i,1)
344	ENDDO
345	ENDDO
346	ENDIF
347
348	C
349	C Eau dans le sol (pour le modele de sol "bucket")
350	C
351	CALL get_field("QSOL",qsol,found)
352	IF (.NOT. found) THEN
353	PRINT*, 'phyetat0: Le champ <QSOL> est absent'
354	PRINT*, ' Valeur par defaut nulle'
355	qsol(:)=0.
356	ENDIF
357
358	xmin = 1.0E+20
359	xmax = -1.0E+20
360	DO i = 1, klon
361	xmin = MIN(qsol(i),xmin)
362	xmax = MAX(qsol(i),xmax)
363	ENDDO
364	PRINT*,'Eau dans le sol (mm) <QSOL>', xmin, xmax
365
366	c
367	c Lecture de neige au sol:
368	c
369
370	CALL get_field("SNOW",snow(:,1),found)
371	IF (.NOT. found) THEN
372	PRINT*, 'phyetat0: Le champ <SNOW> est absent'
373	PRINT, ' Mais je vais essayer de lire SNOW*'
374	DO nsrf = 1, nbsrf
375	IF (nsrf.GT.99) THEN
376	PRINT*, "Trop de sous-mailles"
377	CALL abort
378	ENDIF
379	WRITE(str2,'(i2.2)') nsrf
380	CALL get_field( "SNOW"//str2,snow(:,nsrf))
381	xmin = 1.0E+20
382	xmax = -1.0E+20
383	DO i = 1, klon
384	xmin = MIN(snow(i,nsrf),xmin)
385	xmax = MAX(snow(i,nsrf),xmax)
386	ENDDO
387	PRINT,'Neige du sol SNOW*:', nsrf, xmin, xmax
388	ENDDO
389	ELSE
390	PRINT*, 'phyetat0: Le champ <SNOW> est present'
391	PRINT, ' J ignore donc les autres neiges SNOW*'
392	xmin = 1.0E+20
393	xmax = -1.0E+20
394	DO i = 1, klon
395	xmin = MIN(snow(i,1),xmin)
396	xmax = MAX(snow(i,1),xmax)
397	ENDDO
398	PRINT*,'Neige du sol <SNOW>', xmin, xmax
399	DO nsrf = 2, nbsrf
400	DO i = 1, klon
401	snow(i,nsrf) = snow(i,1)
402	ENDDO
403	ENDDO
404	ENDIF
405	c
406	c Lecture de albedo de l'interval visible au sol:
407	c
408	CALL get_field("ALBE",falb1(:,1),found)
409	IF (.NOT. found) THEN
410	PRINT*, 'phyetat0: Le champ <ALBE> est absent'
411	PRINT, ' Mais je vais essayer de lire ALBE*'
412	DO nsrf = 1, nbsrf
413	IF (nsrf.GT.99) THEN
414	PRINT*, "Trop de sous-mailles"
415	CALL abort
416	ENDIF
417	WRITE(str2,'(i2.2)') nsrf
418	CALL get_field("ALBE"//str2,falb1(:,nsrf))
419	xmin = 1.0E+20
420	xmax = -1.0E+20
421	DO i = 1, klon
422	xmin = MIN(falb1(i,nsrf),xmin)
423	xmax = MAX(falb1(i,nsrf),xmax)
424	ENDDO
425	PRINT,'Albedo du sol ALBE*:', nsrf, xmin, xmax
426	ENDDO
427	ELSE
428	PRINT*, 'phyetat0: Le champ <ALBE> est present'
429	PRINT, ' J ignore donc les autres ALBE*'
430	xmin = 1.0E+20
431	xmax = -1.0E+20
432	DO i = 1, klon
433	xmin = MIN(falb1(i,1),xmin)
434	xmax = MAX(falb1(i,1),xmax)
435	ENDDO
436	PRINT*,'Neige du sol <ALBE>', xmin, xmax
437	DO nsrf = 2, nbsrf
438	DO i = 1, klon
439	falb1(i,nsrf) = falb1(i,1)
440	ENDDO
441	ENDDO
442	ENDIF
443
444	c
445	c Lecture de albedo au sol dans l'interval proche infra-rouge:
446	c
447	CALL get_field("ALBLW",falb2(:,1),found)
448	IF (.NOT. found) THEN
449	PRINT*, 'phyetat0: Le champ <ALBLW> est absent'
450	PRINT, ' Mais je vais prendre ALBE*'
451	DO nsrf = 1, nbsrf
452	DO i = 1, klon
453	falb2(i,nsrf) = falb1(i,nsrf)
454	ENDDO
455	ENDDO
456	ELSE
457	PRINT*, 'phyetat0: Le champ <ALBLW> est present'
458	PRINT, ' J ignore donc les autres ALBLW*'
459	xmin = 1.0E+20
460	xmax = -1.0E+20
461	DO i = 1, klon
462	xmin = MIN(falb2(i,1),xmin)
463	xmax = MAX(falb2(i,1),xmax)
464	ENDDO
465	PRINT*,'Neige du sol <ALBLW>', xmin, xmax
466	DO nsrf = 2, nbsrf
467	DO i = 1, klon
468	falb2(i,nsrf) = falb2(i,1)
469	ENDDO
470	ENDDO
471	ENDIF
472	c
473	c Lecture de evaporation:
474	c
475	CALL get_field("EVAP",evap(:,1),found)
476	IF (.NOT. found) THEN
477	PRINT*, 'phyetat0: Le champ <EVAP> est absent'
478	PRINT, ' Mais je vais essayer de lire EVAP*'
479	DO nsrf = 1, nbsrf
480	IF (nsrf.GT.99) THEN
481	PRINT*, "Trop de sous-mailles"
482	CALL abort
483	ENDIF
484	WRITE(str2,'(i2.2)') nsrf
485	CALL get_field("EVAP"//str2, evap(:,nsrf))
486	xmin = 1.0E+20
487	xmax = -1.0E+20
488	DO i = 1, klon
489	xmin = MIN(evap(i,nsrf),xmin)
490	xmax = MAX(evap(i,nsrf),xmax)
491	ENDDO
492	PRINT,'evap du sol EVAP*:', nsrf, xmin, xmax
493	ENDDO
494	ELSE
495	PRINT*, 'phyetat0: Le champ <EVAP> est present'
496	PRINT, ' J ignore donc les autres EVAP*'
497	xmin = 1.0E+20
498	xmax = -1.0E+20
499	DO i = 1, klon
500	xmin = MIN(evap(i,1),xmin)
501	xmax = MAX(evap(i,1),xmax)
502	ENDDO
503	PRINT*,'Evap du sol <EVAP>', xmin, xmax
504	DO nsrf = 2, nbsrf
505	DO i = 1, klon
506	evap(i,nsrf) = evap(i,1)
507	ENDDO
508	ENDDO
509	ENDIF
510	c
511	c Lecture precipitation liquide:
512	c
513	CALL get_field("rain_f",rain_fall)
514	xmin = 1.0E+20
515	xmax = -1.0E+20
516	DO i = 1, klon
517	xmin = MIN(rain_fall(i),xmin)
518	xmax = MAX(rain_fall(i),xmax)
519	ENDDO
520	PRINT*,'Precipitation liquide rain_f:', xmin, xmax
521	c
522	c Lecture precipitation solide:
523	c
524	CALL get_field("snow_f",snow_fall)
525	xmin = 1.0E+20
526	xmax = -1.0E+20
527	DO i = 1, klon
528	xmin = MIN(snow_fall(i),xmin)
529	xmax = MAX(snow_fall(i),xmax)
530	ENDDO
531	PRINT*,'Precipitation solide snow_f:', xmin, xmax
532	c
533	c Lecture rayonnement solaire au sol:
534	c
535	CALL get_field("solsw",solsw,found)
536	IF (.NOT. found) THEN
537	PRINT*, 'phyetat0: Le champ <solsw> est absent'
538	PRINT*, 'mis a zero'
539	solsw(:) = 0.
540	ENDIF
541	xmin = 1.0E+20
542	xmax = -1.0E+20
543	DO i = 1, klon
544	xmin = MIN(solsw(i),xmin)
545	xmax = MAX(solsw(i),xmax)
546	ENDDO
547	PRINT*,'Rayonnement solaire au sol solsw:', xmin, xmax
548	c
549	c Lecture rayonnement IF au sol:
550	c
551	CALL get_field("sollw",sollw,found)
552	IF (.NOT. found) THEN
553	PRINT*, 'phyetat0: Le champ <sollw> est absent'
554	PRINT*, 'mis a zero'
555	sollw = 0.
556	ENDIF
557	xmin = 1.0E+20
558	xmax = -1.0E+20
559	DO i = 1, klon
560	xmin = MIN(sollw(i),xmin)
561	xmax = MAX(sollw(i),xmax)
562	ENDDO
563	PRINT*,'Rayonnement IF au sol sollw:', xmin, xmax
564
565	c
566	c Lecture derive des flux:
567	c
568	CALL get_field("fder",fder,found)
569	IF (.NOT. found) THEN
570	PRINT*, 'phyetat0: Le champ <fder> est absent'
571	PRINT*, 'mis a zero'
572	fder = 0.
573	ENDIF
574	xmin = 1.0E+20
575	xmax = -1.0E+20
576	DO i = 1, klon
577	xmin = MIN(fder(i),xmin)
578	xmax = MAX(fder(i),xmax)
579	ENDDO
580	PRINT*,'Derive des flux fder:', xmin, xmax
581
582	c
583	c Lecture du rayonnement net au sol:
584	c
585	CALL get_field("RADS",radsol)
586	xmin = 1.0E+20
587	xmax = -1.0E+20
588	DO i = 1, klon
589	xmin = MIN(radsol(i),xmin)
590	xmax = MAX(radsol(i),xmax)
591	ENDDO
592	PRINT*,'Rayonnement net au sol radsol:', xmin, xmax
593	c
594	c Lecture de la longueur de rugosite
595	c
596	c
597	CALL get_field("RUG",frugs(:,1),found)
598	IF (.NOT. found) THEN
599	PRINT*, 'phyetat0: Le champ <RUG> est absent'
600	PRINT, ' Mais je vais essayer de lire RUG*'
601	DO nsrf = 1, nbsrf
602	IF (nsrf.GT.99) THEN
603	PRINT*, "Trop de sous-mailles"
604	CALL abort
605	ENDIF
606	WRITE(str2,'(i2.2)') nsrf
607	CALL get_field("RUG"//str2,frugs(:,nsrf))
608	xmin = 1.0E+20
609	xmax = -1.0E+20
610	DO i = 1, klon
611	xmin = MIN(frugs(i,nsrf),xmin)
612	xmax = MAX(frugs(i,nsrf),xmax)
613	ENDDO
614	PRINT,'rugosite du sol RUG*:', nsrf, xmin, xmax
615	ENDDO
616	ELSE
617	PRINT*, 'phyetat0: Le champ <RUG> est present'
618	PRINT, ' J ignore donc les autres RUG*'
619	xmin = 1.0E+20
620	xmax = -1.0E+20
621	DO i = 1, klon
622	xmin = MIN(frugs(i,1),xmin)
623	xmax = MAX(frugs(i,1),xmax)
624	ENDDO
625	PRINT*,'rugosite <RUG>', xmin, xmax
626	DO nsrf = 2, nbsrf
627	DO i = 1, klon
628	frugs(i,nsrf) = frugs(i,1)
629	ENDDO
630	ENDDO
631	ENDIF
632
633	c
634	c Lecture de l'age de la neige:
635	c
636	CALL get_field("AGESNO",agesno(:,1),found)
637	IF (.NOT. found) THEN
638	PRINT*, 'phyetat0: Le champ <AGESNO> est absent'
639	PRINT, ' Mais je vais essayer de lire AGESNO*'
640	DO nsrf = 1, nbsrf
641	IF (nsrf.GT.99) THEN
642	PRINT*, "Trop de sous-mailles"
643	CALL abort
644	ENDIF
645	WRITE(str2,'(i2.2)') nsrf
646	CALL get_field("AGESNO"//str2,agesno(:,nsrf),found)
647	IF (.NOT. found) THEN
648	PRINT*, "phyetat0: Le champ <AGESNO"//str2//"> est absent"
649	agesno = 50.0
650	ENDIF
651	xmin = 1.0E+20
652	xmax = -1.0E+20
653	DO i = 1, klon
654	xmin = MIN(agesno(i,nsrf),xmin)
655	xmax = MAX(agesno(i,nsrf),xmax)
656	ENDDO
657	PRINT,'Age de la neige AGESNO*:', nsrf, xmin, xmax
658	ENDDO
659	ELSE
660	PRINT*, 'phyetat0: Le champ <AGESNO> est present'
661	PRINT, ' J ignore donc les autres AGESNO*'
662	xmin = 1.0E+20
663	xmax = -1.0E+20
664	DO i = 1, klon
665	xmin = MIN(agesno(i,1),xmin)
666	xmax = MAX(agesno(i,1),xmax)
667	ENDDO
668	PRINT*,'Age de la neige <AGESNO>', xmin, xmax
669	DO nsrf = 2, nbsrf
670	DO i = 1, klon
671	agesno(i,nsrf) = agesno(i,1)
672	ENDDO
673	ENDDO
674	ENDIF
675
676	c
677	CALL get_field("ZMEA", zmea)
678	xmin = 1.0E+20
679	xmax = -1.0E+20
680	DO i = 1, klon
681	xmin = MIN(zmea(i),xmin)
682	xmax = MAX(zmea(i),xmax)
683	ENDDO
684	PRINT*,'OROGRAPHIE SOUS-MAILLE zmea:', xmin, xmax
685	c
686	c
687	CALL get_field("ZSTD",zstd)
688	xmin = 1.0E+20
689	xmax = -1.0E+20
690	DO i = 1, klon
691	xmin = MIN(zstd(i),xmin)
692	xmax = MAX(zstd(i),xmax)
693	ENDDO
694	PRINT*,'OROGRAPHIE SOUS-MAILLE zstd:', xmin, xmax
695	c
696	c
697	CALL get_field("ZSIG",zsig)
698	xmin = 1.0E+20
699	xmax = -1.0E+20
700	DO i = 1, klon
701	xmin = MIN(zsig(i),xmin)
702	xmax = MAX(zsig(i),xmax)
703	ENDDO
704	PRINT*,'OROGRAPHIE SOUS-MAILLE zsig:', xmin, xmax
705	c
706	c
707	CALL get_field("ZGAM",zgam)
708	xmin = 1.0E+20
709	xmax = -1.0E+20
710	DO i = 1, klon
711	xmin = MIN(zgam(i),xmin)
712	xmax = MAX(zgam(i),xmax)
713	ENDDO
714	PRINT*,'OROGRAPHIE SOUS-MAILLE zgam:', xmin, xmax
715	c
716	c
717	CALL get_field("ZTHE",zthe)
718	xmin = 1.0E+20
719	xmax = -1.0E+20
720	DO i = 1, klon
721	xmin = MIN(zthe(i),xmin)
722	xmax = MAX(zthe(i),xmax)
723	ENDDO
724	PRINT*,'OROGRAPHIE SOUS-MAILLE zthe:', xmin, xmax
725	c
726	c
727	CALL get_field("ZPIC",zpic)
728	xmin = 1.0E+20
729	xmax = -1.0E+20
730	DO i = 1, klon
731	xmin = MIN(zpic(i),xmin)
732	xmax = MAX(zpic(i),xmax)
733	ENDDO
734	PRINT*,'OROGRAPHIE SOUS-MAILLE zpic:', xmin, xmax
735	c
736	CALL get_field("ZVAL",zval)
737	xmin = 1.0E+20
738	xmax = -1.0E+20
739	DO i = 1, klon
740	xmin = MIN(zval(i),xmin)
741	xmax = MAX(zval(i),xmax)
742	ENDDO
743	PRINT*,'OROGRAPHIE SOUS-MAILLE zval:', xmin, xmax
744	c
745	c
746	CALL get_field("RUGSREL",rugoro)
747	xmin = 1.0E+20
748	xmax = -1.0E+20
749	DO i = 1, klon
750	xmin = MIN(rugoro(i),xmin)
751	xmax = MAX(rugoro(i),xmax)
752	ENDDO
753	PRINT*,'Rugosite relief (ecart-type) rugsrel:', xmin, xmax
754	c
755	c
756
757	c
758	ancien_ok = .TRUE.
759
760	CALL get_field("TANCIEN",t_ancien,found)
761	IF (.NOT. found) THEN
762	PRINT*, "phyetat0: Le champ <TANCIEN> est absent"
763	PRINT*, "Depart legerement fausse. Mais je continue"
764	ancien_ok = .FALSE.
765	ENDIF
766
767
768	CALL get_field("QANCIEN",q_ancien,found)
769	IF (.NOT. found) THEN
770	PRINT*, "phyetat0: Le champ <QANCIEN> est absent"
771	PRINT*, "Depart legerement fausse. Mais je continue"
772	ancien_ok = .FALSE.
773	ENDIF
774
775	u_ancien = 0.0 !AXC: We don't have u_ancien and v_ancien in the start
776	v_ancien = 0.0 !AXC: files, therefore they have to be initialized.
777	c
778
779	clwcon=0.
780	CALL get_field("CLWCON",clwcon(:,1),found)
781	IF (.NOT. found) THEN
782	PRINT*, "phyetat0: Le champ CLWCON est absent"
783	PRINT*, "Depart legerement fausse. Mais je continue"
784	ENDIF
785	xmin = 1.0E+20
786	xmax = -1.0E+20
787	xmin = MINval(clwcon)
788	xmax = MAXval(clwcon)
789	PRINT*,'Eau liquide convective (ecart-type) clwcon:', xmin, xmax
790	c
791	rnebcon = 0.
792	CALL get_field("RNEBCON",rnebcon(:,1),found)
793	IF (.NOT. found) THEN
794	PRINT*, "phyetat0: Le champ RNEBCON est absent"
795	PRINT*, "Depart legerement fausse. Mais je continue"
796	ENDIF
797	xmin = 1.0E+20
798	xmax = -1.0E+20
799	xmin = MINval(rnebcon)
800	xmax = MAXval(rnebcon)
801	PRINT*,'Nebulosite convective (ecart-type) rnebcon:', xmin, xmax
802
803	c
804	c Lecture ratqs
805	c
806	ratqs=0.
807	CALL get_field("RATQS",ratqs(:,1),found)
808	IF (.NOT. found) THEN
809	PRINT*, "phyetat0: Le champ <RATQS> est absent"
810	PRINT*, "Depart legerement fausse. Mais je continue"
811	ENDIF
812	xmin = 1.0E+20
813	xmax = -1.0E+20
814	xmin = MINval(ratqs)
815	xmax = MAXval(ratqs)
816	PRINT*,'(ecart-type) ratqs:', xmin, xmax
817	c
818	c Lecture run_off_lic_0
819	c
820	CALL get_field("RUNOFFLIC0",run_off_lic_0,found)
821	IF (.NOT. found) THEN
822	PRINT*, "phyetat0: Le champ <RUNOFFLIC0> est absent"
823	PRINT*, "Depart legerement fausse. Mais je continue"
824	run_off_lic_0 = 0.
825	ENDIF
826	xmin = 1.0E+20
827	xmax = -1.0E+20
828	xmin = MINval(run_off_lic_0)
829	xmax = MAXval(run_off_lic_0)
830	PRINT*,'(ecart-type) run_off_lic_0:', xmin, xmax
831
832
833	c Lecture de l'energie cinetique turbulente
834	c
835
836	IF (iflag_pbl>1) then
837	DO nsrf = 1, nbsrf
838	IF (nsrf.GT.99) THEN
839	PRINT*, "Trop de sous-mailles"
840	CALL abort
841	ENDIF
842	WRITE(str2,'(i2.2)') nsrf
843	CALL get_field("TKE"//str2,pbl_tke(:,1:klev,nsrf),found)
844	IF (.NOT. found) THEN
845	PRINT*, "phyetat0: <TKE"//str2//"> est absent"
846	pbl_tke(:,:,nsrf)=1.e-8
847	ENDIF
848	xmin = 1.0E+20
849	xmax = -1.0E+20
850	DO k = 1, klev
851	DO i = 1, klon
852	xmin = MIN(pbl_tke(i,k,nsrf),xmin)
853	xmax = MAX(pbl_tke(i,k,nsrf),xmax)
854	ENDDO
855	ENDDO
856	PRINT,'Temperature du sol TKE*:', nsrf, xmin, xmax
857	ENDDO
858	ENDIF
859	c
860	c zmax0
861	CALL get_field("ZMAX0",zmax0,found)
862	IF (.NOT. found) THEN
863	PRINT*, "phyetat0: Le champ <ZMAX0> est absent"
864	PRINT*, "Depart legerement fausse. Mais je continue"
865	zmax0=40.
866	ENDIF
867	xmin = 1.0E+20
868	xmax = -1.0E+20
869	xmin = MINval(zmax0)
870	xmax = MAXval(zmax0)
871	PRINT*,'(ecart-type) zmax0:', xmin, xmax
872	c
873	c f0(ig)=1.e-5
874	c f0
875	CALL get_field("F0",f0,found)
876	IF (.NOT. found) THEN
877	PRINT*, "phyetat0: Le champ <f0> est absent"
878	PRINT*, "Depart legerement fausse. Mais je continue"
879	f0=1.e-5
880	ENDIF
881	xmin = 1.0E+20
882	xmax = -1.0E+20
883	xmin = MINval(f0)
884	xmax = MAXval(f0)
885	PRINT*,'(ecart-type) f0:', xmin, xmax
886	c
887	c ema_work1
888	c
889	CALL get_field("EMA_WORK1",ema_work1,found)
890	IF (.NOT. found) THEN
891	PRINT*, "phyetat0: Le champ <EMA_WORK1> est absent"
892	PRINT*, "Depart legerement fausse. Mais je continue"
893	ema_work1=0.
894	ELSE
895	xmin = 1.0E+20
896	xmax = -1.0E+20
897	DO k = 1, klev
898	DO i = 1, klon
899	xmin = MIN(ema_work1(i,k),xmin)
900	xmax = MAX(ema_work1(i,k),xmax)
901	ENDDO
902	ENDDO
903	PRINT*,'ema_work1:', xmin, xmax
904	ENDIF
905	c
906	c ema_work2
907	c
908	CALL get_field("EMA_WORK2",ema_work2,found)
909	IF (.NOT. found) THEN
910	PRINT*, "phyetat0: Le champ <EMA_WORK2> est absent"
911	PRINT*, "Depart legerement fausse. Mais je continue"
912	ema_work2=0.
913	ELSE
914	xmin = 1.0E+20
915	xmax = -1.0E+20
916	DO k = 1, klev
917	DO i = 1, klon
918	xmin = MIN(ema_work2(i,k),xmin)
919	xmax = MAX(ema_work2(i,k),xmax)
920	ENDDO
921	ENDDO
922	PRINT*,'ema_work2:', xmin, xmax
923	ENDIF
924	c
925	c wake_deltat
926	c
927	CALL get_field("WAKE_DELTAT",wake_deltat,found)
928	IF (.NOT. found) THEN
929	PRINT*, "phyetat0: Le champ <WAKE_DELTAT> est absent"
930	PRINT*, "Depart legerement fausse. Mais je continue"
931	wake_deltat=0.
932	ELSE
933	xmin = 1.0E+20
934	xmax = -1.0E+20
935	DO k = 1, klev
936	DO i = 1, klon
937	xmin = MIN(wake_deltat(i,k),xmin)
938	xmax = MAX(wake_deltat(i,k),xmax)
939	ENDDO
940	ENDDO
941	PRINT*,'wake_deltat:', xmin, xmax
942	ENDIF
943	c
944	c wake_deltaq
945	c
946	CALL get_field("WAKE_DELTAQ",wake_deltaq,found)
947	IF (.NOT. found) THEN
948	PRINT*, "phyetat0: Le champ <WAKE_DELTAQ> est absent"
949	PRINT*, "Depart legerement fausse. Mais je continue"
950	wake_deltaq=0.
951	ELSE
952	xmin = 1.0E+20
953	xmax = -1.0E+20
954	DO k = 1, klev
955	DO i = 1, klon
956	xmin = MIN(wake_deltaq(i,k),xmin)
957	xmax = MAX(wake_deltaq(i,k),xmax)
958	ENDDO
959	ENDDO
960	PRINT*,'wake_deltaq:', xmin, xmax
961	ENDIF
962	c
963	c wake_s
964	c
965	CALL get_field("WAKE_S",wake_s,found)
966	IF (.NOT. found) THEN
967	PRINT*, "phyetat0: Le champ <WAKE_S> est absent"
968	PRINT*, "Depart legerement fausse. Mais je continue"
969	wake_s=0.
970	ENDIF
971	xmin = 1.0E+20
972	xmax = -1.0E+20
973	xmin = MINval(wake_s)
974	xmax = MAXval(wake_s)
975	PRINT*,'(ecart-type) wake_s:', xmin, xmax
976	c
977	c wake_cstar
978	c
979	CALL get_field("WAKE_CSTAR",wake_cstar,found)
980	IF (.NOT. found) THEN
981	PRINT*, "phyetat0: Le champ <WAKE_CSTAR> est absent"
982	PRINT*, "Depart legerement fausse. Mais je continue"
983	wake_cstar=0.
984	ENDIF
985	xmin = 1.0E+20
986	xmax = -1.0E+20
987	xmin = MINval(wake_cstar)
988	xmax = MAXval(wake_cstar)
989	PRINT*,'(ecart-type) wake_cstar:', xmin, xmax
990	c
991	c wake_pe
992	c
993	CALL get_field("WAKE_PE",wake_pe,found)
994	IF (.NOT. found) THEN
995	PRINT*, "phyetat0: Le champ <WAKE_PE> est absent"
996	PRINT*, "Depart legerement fausse. Mais je continue"
997	wake_pe=0.
998	ENDIF
999	xmin = 1.0E+20
1000	xmax = -1.0E+20
1001	xmin = MINval(wake_pe)
1002	xmax = MAXval(wake_pe)
1003	PRINT*,'(ecart-type) wake_pe:', xmin, xmax
1004	c
1005	c wake_fip
1006	c
1007	CALL get_field("WAKE_FIP",wake_fip,found)
1008	IF (.NOT. found) THEN
1009	PRINT*, "phyetat0: Le champ <WAKE_FIP> est absent"
1010	PRINT*, "Depart legerement fausse. Mais je continue"
1011	wake_fip=0.
1012	ENDIF
1013	xmin = 1.0E+20
1014	xmax = -1.0E+20
1015	xmin = MINval(wake_fip)
1016	xmax = MAXval(wake_fip)
1017	PRINT*,'(ecart-type) wake_fip:', xmin, xmax
1018	c
1019	c thermiques
1020	c
1021
1022	CALL get_field("FM_THERM",fm_therm,found)
1023	IF (.NOT. found) THEN
1024	PRINT*, "phyetat0: Le champ <fm_therm> est absent"
1025	PRINT*, "Depart legerement fausse. Mais je continue"
1026	fm_therm=0.
1027	ENDIF
1028	xmin = 1.0E+20
1029	xmax = -1.0E+20
1030	xmin = MINval(fm_therm)
1031	xmax = MAXval(fm_therm)
1032	PRINT*,'(ecart-type) fm_therm:', xmin, xmax
1033
1034	CALL get_field("ENTR_THERM",entr_therm,found)
1035	IF (.NOT. found) THEN
1036	PRINT*, "phyetat0: Le champ <entr_therm> est absent"
1037	PRINT*, "Depart legerement fausse. Mais je continue"
1038	entr_therm=0.
1039	ENDIF
1040	xmin = 1.0E+20
1041	xmax = -1.0E+20
1042	xmin = MINval(entr_therm)
1043	xmax = MAXval(entr_therm)
1044	PRINT*,'(ecart-type) entr_therm:', xmin, xmax
1045
1046	CALL get_field("DETR_THERM",detr_therm,found)
1047	IF (.NOT. found) THEN
1048	PRINT*, "phyetat0: Le champ <detr_therm> est absent"
1049	PRINT*, "Depart legerement fausse. Mais je continue"
1050	detr_therm=0.
1051	ENDIF
1052	xmin = 1.0E+20
1053	xmax = -1.0E+20
1054	xmin = MINval(detr_therm)
1055	xmax = MAXval(detr_therm)
1056	PRINT*,'(ecart-type) detr_therm:', xmin, xmax
1057
1058
1059
1060	c
1061	c Read and send field trs to traclmdz
1062	c
1063	IF (type_trac == 'lmdz') THEN
1064	DO it=1,nbtr
1065	iiq=niadv(it+2)
1066	CALL get_field("trs_"//tname(iiq),trs(:,it),found)
1067	IF (.NOT. found) THEN
1068	PRINT*,
1069	$ "phyetat0: Le champ <trs_"//tname(iiq)//"> est absent"
1070	PRINT*, "Depart legerement fausse. Mais je continue"
1071	trs(:,it) = 0.
1072	ENDIF
1073	xmin = 1.0E+20
1074	xmax = -1.0E+20
1075	xmin = MINval(trs(:,it))
1076	xmax = MAXval(trs(:,it))
1077	PRINT*,"(ecart-type) trs_"//tname(iiq)//" :", xmin, xmax
1078
1079	END DO
1080
1081	CALL traclmdz_from_restart(trs)
1082	END IF
1083
1084
1085	c on ferme le fichier
1086	CALL close_startphy
1087
1088	CALL init_iophy_new(rlat,rlon)
1089
1090
1091	c
1092	c Initialize module pbl_surface_mod
1093	c
1094	CALL pbl_surface_init(qsol, fder, snow, qsurf,
1095	$ evap, frugs, agesno, tsoil)
1096
1097	c Initialize module ocean_cpl_mod for the case of coupled ocean
1098	IF ( type_ocean == 'couple' ) THEN
1099	CALL ocean_cpl_init(dtime, rlon, rlat)
1100	ENDIF
1101	c
1102	c Initilialize module fonte_neige_mod
1103	c
1104	CALL fonte_neige_init(run_off_lic_0)
1105
1106
1107	RETURN
1108	END

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format