source: LMDZ4/branches/LMDZ4V5.0-dev/libf/dyn3d/infotrac.F90 @ 5023

! $Id$
!
MODULE infotrac

! nqtot : total number of tracers and higher order of moment, water vapor and liquid included
  INTEGER, SAVE :: nqtot

! nbtr : number of tracers not including higher order of moment or water vapor or liquid
!        number of tracers used in the physics
  INTEGER, SAVE :: nbtr

! Name variables
  CHARACTER(len=20), ALLOCATABLE, DIMENSION(:), SAVE :: tname ! tracer short name for restart and diagnostics
  CHARACTER(len=23), ALLOCATABLE, DIMENSION(:), SAVE :: ttext ! tracer long name for diagnostics

! iadv  : index of trasport schema for each tracer
  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE    :: iadv

! niadv : vector keeping the coorspondance between all tracers(nqtot) treated in the 
!         dynamic part of the code and the tracers (nbtr+2) used in the physics part of the code. 
  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE    :: niadv ! equivalent dyn / physique

! conv_flg(it)=0 : convection desactivated for tracer number it 
  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE  :: conv_flg
! pbl_flg(it)=0  : boundary layer diffusion desactivaded for tracer number it 
  INTEGER, ALLOCATABLE, DIMENSION(:), SAVE  :: pbl_flg

  CHARACTER(len=4),SAVE :: type_trac
 
CONTAINS

  SUBROUTINE infotrac_init

    USE control_mod
 
    IMPLICIT NONE
!=======================================================================
!
!   Auteur:  P. Le Van /L. Fairhead/F.Hourdin
!   -------
!   Modif special traceur F.Forget 05/94
!   Modif M-A Filiberti 02/02 lecture de traceur.def
!
!   Objet:
!   ------
!   GCM LMD nouvelle grille
!
!=======================================================================
!   ... modification de l'integration de q ( 26/04/94 ) ....
!-----------------------------------------------------------------------
! Declarations

    INCLUDE "dimensions.h"
    INCLUDE "iniprint.h"

! Local variables
    INTEGER, ALLOCATABLE, DIMENSION(:) :: hadv  ! index of horizontal trasport schema
    INTEGER, ALLOCATABLE, DIMENSION(:) :: vadv  ! index of vertical trasport schema

    CHARACTER(len=15), ALLOCATABLE, DIMENSION(:) :: tnom_0  ! tracer short name
    CHARACTER(len=8), ALLOCATABLE, DIMENSION(:) :: tracnam ! name from INCA
    CHARACTER(len=3), DIMENSION(30) :: descrq
    CHARACTER(len=1), DIMENSION(3)  :: txts
    CHARACTER(len=2), DIMENSION(9)  :: txtp
    CHARACTER(len=13)               :: str1,str2
  
    INTEGER :: nqtrue  ! number of tracers read from tracer.def, without higer order of moment
    INTEGER :: iq, new_iq, iiq, jq, ierr
    INTEGER, EXTERNAL :: lnblnk
 
!-----------------------------------------------------------------------
! Initialization :
!
    txts=(/'x','y','z'/)
    txtp=(/'x ','y ','z ','xx','xy','xz','yy','yz','zz'/)

    descrq(14)='VLH'
    descrq(10)='VL1'
    descrq(11)='VLP'
    descrq(12)='FH1'
    descrq(13)='FH2'
    descrq(16)='PPM'
    descrq(17)='PPS'
    descrq(18)='PPP'
    descrq(20)='SLP'
    descrq(30)='PRA'
    

    IF (config_inca=='none') THEN
       type_trac='lmdz'
    ELSE
       type_trac='inca'
    END IF

!-----------------------------------------------------------------------
!
! 1) Get the true number of tracers + water vapor/liquid
!    Here true tracers (nqtrue) means declared tracers (only first order)
!
!-----------------------------------------------------------------------
    IF (type_trac == 'lmdz') THEN
       OPEN(90,file='traceur.def',form='formatted',status='old', iostat=ierr)
       IF(ierr.EQ.0) THEN
          WRITE(lunout,*) 'Open traceur.def : ok'
          READ(90,*) nqtrue
       ELSE 
          WRITE(lunout,*) 'Problem in opening traceur.def'
          WRITE(lunout,*) 'ATTENTION using defaut values'
          nqtrue=4 ! Defaut value
       END IF
       ! Attention! Only for planet_type=='earth'
       nbtr=nqtrue-2
    ELSE
       ! nbtr has been read from INCA by init_cont_lmdz() in gcm.F 
       nqtrue=nbtr+2
    END IF

    IF (nqtrue < 2) THEN
       WRITE(lunout,*) 'nqtrue=',nqtrue, ' is not allowded. 2 tracers is the minimum'
       CALL abort_gcm('infotrac_init','Not enough tracers',1)
    END IF
!
! Allocate variables depending on nqtrue and nbtr
!
    ALLOCATE(tnom_0(nqtrue), hadv(nqtrue), vadv(nqtrue))
    ALLOCATE(conv_flg(nbtr), pbl_flg(nbtr), tracnam(nbtr))
    conv_flg(:) = 1 ! convection activated for all tracers
    pbl_flg(:)  = 1 ! boundary layer activated for all tracers

!-----------------------------------------------------------------------
! 2)     Choix  des schemas d'advection pour l'eau et les traceurs
!
!     iadv = 1    schema  transport type "humidite specifique LMD"
!     iadv = 2    schema   amont
!     iadv = 14   schema  Van-leer + humidite specifique 
!                            Modif F.Codron
!     iadv = 10   schema  Van-leer (retenu pour l'eau vapeur et liquide)
!     iadv = 11   schema  Van-Leer pour hadv et version PPM (Monotone) pour vadv
!     iadv = 12   schema  Frederic Hourdin I
!     iadv = 13   schema  Frederic Hourdin II
!     iadv = 16   schema  PPM Monotone(Collela & Woodward 1984)
!     iadv = 17   schema  PPM Semi Monotone (overshoots autorisés)
!     iadv = 18   schema  PPM Positif Defini (overshoots undershoots autorisés)
!     iadv = 20   schema  Slopes
!     iadv = 30   schema  Prather
!
!        Dans le tableau q(ij,l,iq) : iq = 1  pour l'eau vapeur
!                                     iq = 2  pour l'eau liquide
!       Et eventuellement             iq = 3,nqtot pour les autres traceurs
!
!        iadv(1): choix pour l'eau vap. et  iadv(2) : choix pour l'eau liq.
!------------------------------------------------------------------------
!
!    Get choice of advection schema from file tracer.def or from INCA
!---------------------------------------------------------------------
    IF (type_trac == 'lmdz') THEN
       IF(ierr.EQ.0) THEN
          ! Continue to read tracer.def
          DO iq=1,nqtrue
             READ(90,999) hadv(iq),vadv(iq),tnom_0(iq)
          END DO
          CLOSE(90)  
       ELSE ! Without tracer.def
          hadv(1) = 14
          vadv(1) = 14
          tnom_0(1) = 'H2Ov'
          hadv(2) = 10
          vadv(2) = 10
          tnom_0(2) = 'H2Ol'
          hadv(3) = 10
          vadv(3) = 10
          tnom_0(3) = 'RN'
          hadv(4) = 10
          vadv(4) = 10
          tnom_0(4) = 'PB'
       END IF
       
       WRITE(lunout,*) 'Valeur de traceur.def :'
       WRITE(lunout,*) 'nombre de traceurs ',nqtrue
       DO iq=1,nqtrue
          WRITE(lunout,*) hadv(iq),vadv(iq),tnom_0(iq)
       END DO

    ELSE  ! type_trac=inca : config_inca='aero' ou 'chem'
! le module de chimie fournit les noms des traceurs
! et les schemas d'advection associes.
     
#ifdef INCA
       CALL init_transport( &
            hadv, &
            vadv, &
            conv_flg, &
            pbl_flg,  &
            tracnam)
#endif
       tnom_0(1)='H2Ov'
       tnom_0(2)='H2Ol'

       DO iq =3,nqtrue
          tnom_0(iq)=tracnam(iq-2)
       END DO

    END IF ! type_trac

!-----------------------------------------------------------------------
!
! 3) Verify if advection schema 20 or 30 choosen
!    Calculate total number of tracers needed: nqtot
!    Allocate variables depending on total number of tracers
!-----------------------------------------------------------------------
    new_iq=0
    DO iq=1,nqtrue
       ! Add tracers for certain advection schema
       IF (hadv(iq)<20 .AND. vadv(iq)<20 ) THEN
          new_iq=new_iq+1  ! no tracers added
       ELSE IF (hadv(iq)==20 .AND. vadv(iq)==20 ) THEN
          new_iq=new_iq+4  ! 3 tracers added
       ELSE IF (hadv(iq)==30 .AND. vadv(iq)==30 ) THEN
          new_iq=new_iq+10 ! 9 tracers added
       ELSE
          WRITE(lunout,*) 'This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
          CALL abort_gcm('infotrac_init','Bad choice of advection schema - 1',1)
       END IF
    END DO
    
    IF (new_iq /= nqtrue) THEN
       ! The choice of advection schema imposes more tracers
       ! Assigne total number of tracers
       nqtot = new_iq

       WRITE(lunout,*) 'The choice of advection schema for one or more tracers'
       WRITE(lunout,*) 'makes it necessary to add tracers'
       WRITE(lunout,*) nqtrue,' is the number of true tracers'
       WRITE(lunout,*) nqtot, ' is the total number of tracers needed'

    ELSE
       ! The true number of tracers is also the total number
       nqtot = nqtrue
    END IF

!
! Allocate variables with total number of tracers, nqtot
!
    ALLOCATE(tname(nqtot), ttext(nqtot))
    ALLOCATE(iadv(nqtot), niadv(nqtot))

!-----------------------------------------------------------------------
!
! 4) Determine iadv, long and short name
!
!-----------------------------------------------------------------------
    new_iq=0
    DO iq=1,nqtrue
       new_iq=new_iq+1

       ! Verify choice of advection schema
       IF (hadv(iq)==vadv(iq)) THEN
          iadv(new_iq)=hadv(iq)
       ELSE IF (hadv(iq)==10 .AND. vadv(iq)==16) THEN
          iadv(new_iq)=11
       ELSE
          WRITE(lunout,*)'This choice of advection schema is not available',iq,hadv(iq),vadv(iq)
          CALL abort_gcm('infotrac_init','Bad choice of advection schema - 2',1)
       END IF
      
       str1=tnom_0(iq)
       tname(new_iq)= tnom_0(iq)
       IF (iadv(new_iq)==0) THEN
          ttext(new_iq)=str1(1:lnblnk(str1))
       ELSE
          ttext(new_iq)=str1(1:lnblnk(str1))//descrq(iadv(new_iq))
       END IF

       ! schemas tenant compte des moments d'ordre superieur
       str2=ttext(new_iq)
       IF (iadv(new_iq)==20) THEN
          DO jq=1,3
             new_iq=new_iq+1
             iadv(new_iq)=-20
             ttext(new_iq)=str2(1:lnblnk(str2))//txts(jq)
             tname(new_iq)=str1(1:lnblnk(str1))//txts(jq)
          END DO
       ELSE IF (iadv(new_iq)==30) THEN
          DO jq=1,9
             new_iq=new_iq+1
             iadv(new_iq)=-30
             ttext(new_iq)=str2(1:lnblnk(str2))//txtp(jq)
             tname(new_iq)=str1(1:lnblnk(str1))//txtp(jq)
          END DO
       END IF
    END DO

!
! Find vector keeping the correspodence between true and total tracers
!
    niadv(:)=0
    iiq=0
    DO iq=1,nqtot
       IF(iadv(iq).GE.0) THEN
          ! True tracer
          iiq=iiq+1
          niadv(iiq)=iq
       ENDIF
    END DO


    WRITE(lunout,*) 'Information stored in infotrac :'
    WRITE(lunout,*) 'iadv  niadv tname  ttext :'
    DO iq=1,nqtot
       WRITE(lunout,*) iadv(iq),niadv(iq), tname(iq), ttext(iq)
    END DO

!
! Test for advection schema. 
! This version of LMDZ only garantees iadv=10 and iadv=14 (14 only for water vapour) .
!
    DO iq=1,nqtot
       IF (iadv(iq)/=10 .AND. iadv(iq)/=14 .AND. iadv(iq)/=0) THEN
          WRITE(lunout,*)'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
          CALL abort_gcm('infotrac_init','In this version only iadv=10 and iadv=14 is tested!',1)
       ELSE IF (iadv(iq)==14 .AND. iq/=1) THEN
          WRITE(lunout,*)'STOP : The option iadv=',iadv(iq),' is not tested in this version of LMDZ'
          CALL abort_gcm('infotrac_init','In this version iadv=14 is only permitted for water vapour!',1)
       END IF
    END DO

!-----------------------------------------------------------------------
! Finalize :
!
    DEALLOCATE(tnom_0, hadv, vadv)
    DEALLOCATE(tracnam)

999 FORMAT (i2,1x,i2,1x,a15)

  END SUBROUTINE infotrac_init

END MODULE infotrac