source: LMDZ4/branches/LMDZ4-dev/libf/dyn3d/ioipsl_getincom.F90 @ 1171

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Module and routines in this file are taken from IOIPSL
! files getincom.f90
! Module names has been changed to avoid problems
! if compiling model with IOIPSL library
! Ehouarn - March 2009
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
MODULE ioipsl_getincom
!---------------------------------------------------------------------
  USE ioipsl_stringop, &
 &   ONLY : findpos,nocomma,cmpblank,strlowercase,gensig,find_sig
!-
  IMPLICIT NONE
!-
  PRIVATE
  PUBLIC :: getin, getin_dump
!-
  INTERFACE getin
    MODULE PROCEDURE getinrs, getinr1d, getinr2d, &
 &                   getinis, getini1d, getini2d, &
 &                   getincs, getinc1d, getinc2d, &
 &                   getinls, getinl1d, getinl2d
  END INTERFACE
!-
  INTEGER,PARAMETER :: max_files=100
  CHARACTER(LEN=100),DIMENSION(max_files),SAVE :: filelist
  INTEGER,SAVE      :: nbfiles
!-
  INTEGER,PARAMETER :: max_lines=4000
  INTEGER,SAVE :: nb_lines
  CHARACTER(LEN=100),DIMENSION(max_lines),SAVE :: fichier
  INTEGER,DIMENSION(max_lines),SAVE :: targetsiglist,fromfile,compline
  CHARACTER(LEN=30),DIMENSION(max_lines),SAVE  :: targetlist
!-
! The data base of parameters
!-
  INTEGER,PARAMETER :: memslabs=200
  INTEGER,PARAMETER :: compress_lim = 20
!-
  INTEGER,SAVE :: nb_keys=0
  INTEGER,SAVE :: keymemsize=0
  INTEGER,SAVE,ALLOCATABLE :: keysig(:)
  CHARACTER(LEN=30),SAVE,ALLOCATABLE :: keystr(:)
!-
! keystatus definition
! keystatus = 1 : Value comes from run.def
! keystatus = 2 : Default value is used
! keystatus = 3 : Some vector elements were taken from default
!-
  INTEGER,SAVE,ALLOCATABLE :: keystatus(:)
!-
! keytype definition
! keytype = 1 : Interger
! keytype = 2 : Real
! keytype = 3 : Character
! keytype = 4 : Logical
!-
  INTEGER,SAVE,ALLOCATABLE :: keytype(:)
!-
! Allow compression for keys (only for integer and real)
! keycompress < 0 : not compresses
! keycompress > 0 : number of repeat of the value
!-
  INTEGER,SAVE,ALLOCATABLE :: keycompress(:)
  INTEGER,SAVE,ALLOCATABLE :: keyfromfile(:)
!-
  INTEGER,SAVE,ALLOCATABLE :: keymemstart(:)
  INTEGER,SAVE,ALLOCATABLE :: keymemlen(:)
!-
  INTEGER,SAVE,ALLOCATABLE :: intmem(:)
  INTEGER,SAVE             :: intmemsize=0, intmempos=0
  REAL,SAVE,ALLOCATABLE :: realmem(:)
  INTEGER,SAVE          :: realmemsize=0, realmempos=0
  CHARACTER(LEN=100),SAVE,ALLOCATABLE :: charmem(:)
  INTEGER,SAVE             :: charmemsize=0, charmempos=0
  LOGICAL,SAVE,ALLOCATABLE :: logicmem(:)
  INTEGER,SAVE             :: logicmemsize=0, logicmempos=0
!-
CONTAINS
!-
!=== REAL INTERFACES
!-
SUBROUTINE getinrs (TARGET,ret_val)
!---------------------------------------------------------------------
!-  Get a real scalar. We first check if we find it
!-  in the database and if not we get it from the run.def
!-
!-  getinr1d and getinr2d are written on the same pattern
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  REAL :: ret_val
!-
  REAL,DIMENSION(1) :: tmp_ret_val
  INTEGER :: target_sig, pos, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  tmp_ret_val(1) = ret_val
!-
  IF (pos < 0) THEN
!-- Get the information out of the file
    CALL getfilr (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwr (TARGET,target_sig,status,fileorig,1,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrr (pos,1,TARGET,tmp_ret_val)
  ENDIF
  ret_val = tmp_ret_val(1)
!---------------------
END SUBROUTINE getinrs
!-
!===
!-
SUBROUTINE getinr1d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinrs for details. It is the same thing but for a vector
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  REAL,DIMENSION(:) :: ret_val
!-
  REAL,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig, pos, size_of_in, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
  tmp_ret_val(1:size_of_in) = ret_val(1:size_of_in)
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfilr (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwr &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrr (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
  ret_val(1:size_of_in) = tmp_ret_val(1:size_of_in)
!----------------------
END SUBROUTINE getinr1d
!-
!===
!-
SUBROUTINE getinr2d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinrs for details. It is the same thing but for a matrix
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  REAL,DIMENSION(:,:) :: ret_val
!-
  REAL,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig,pos,size_of_in,size_1,size_2,status=0,fileorig
  INTEGER :: jl, jj, ji
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  size_1 = SIZE(ret_val,1)
  size_2 = SIZE(ret_val,2)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      tmp_ret_val(jl) = ret_val(ji,jj)
    ENDDO
  ENDDO
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfilr (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwr &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrr (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      ret_val(ji,jj) = tmp_ret_val(jl)
    ENDDO
  ENDDO
!----------------------
END SUBROUTINE getinr2d
!-
!===
!-
SUBROUTINE getfilr (TARGET,status,fileorig,ret_val)
!---------------------------------------------------------------------
!- Subroutine that will extract from the file the values
!- attributed to the keyword target
!-
!- REALS
!- -----
!-
!- target   : in  : CHARACTER(LEN=*)  target for which we will
!-                                    look in the file
!- status   : out : INTEGER tells us from where we obtained the data
!- fileorig : out : The index of the file from which the key comes
!- ret_val  : out : REAL(nb_to_ret) values read
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER :: status, fileorig
  REAL,DIMENSION(:) :: ret_val
!-
  INTEGER :: nb_to_ret
  INTEGER :: it, pos, len_str, epos, ppos, int_tmp, status_cnt
  CHARACTER(LEN=3)  :: cnt, tl, dl
  CHARACTER(LEN=10) :: fmt
  CHARACTER(LEN=30) :: full_target
  CHARACTER(LEN=80) :: str_READ, str_READ_lower, str_tmp
  INTEGER :: full_target_sig
  REAL :: compvalue
!-
  INTEGER,SAVE :: max_len = 0
  LOGICAL,SAVE,ALLOCATABLE :: found(:)
  LOGICAL :: def_beha
  LOGICAL :: compressed = .FALSE.
!---------------------------------------------------------------------
  nb_to_ret = SIZE(ret_val)
  CALL getin_read
!-
! Get the variables and memory we need
!-
  IF (max_len == 0) THEN
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  IF (max_len < nb_to_ret) THEN
    DEALLOCATE(found)
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  found(:) = .FALSE.
!-
! See what we find in the files read
!-
  DO it=1,nb_to_ret
!---
!-
!-- First try the target as it is
!---
    full_target = TARGET(1:len_TRIM(target))
    CALL gensig (full_target,full_target_sig)
    CALL find_sig (nb_lines,targetlist,full_target, &
 &                 targetsiglist,full_target_sig,pos)
!---
!-- Another try
!---
    IF (pos < 0) THEN
      WRITE(cnt,'(I3.3)') it
      full_target = TARGET(1:len_TRIM(target))//'__'//cnt
      CALL gensig (full_target,full_target_sig)
      CALL find_sig (nb_lines,targetlist,full_target, &
 &                   targetsiglist,full_target_sig,pos)
    ENDIF
!---
!-- A priori we dont know from which file the target could come.
!-- Thus by default we attribute it to the first file :
!---
    fileorig = 1
!--
    IF (pos > 0) THEN
!----
      found(it) = .TRUE.
      fileorig = fromfile(pos)
!-----
!---- DECODE
!-----
      str_READ = TRIM(ADJUSTL(fichier(pos)))
      str_READ_lower = str_READ
      CALL strlowercase (str_READ_lower)
!----
      IF (    (     (INDEX(str_READ_lower,'def') == 1)     &
 &             .AND.(LEN_TRIM(str_READ_lower) == 3)   )    &
 &        .OR.(     (INDEX(str_READ_lower,'default') == 1) &
 &             .AND.(LEN_TRIM(str_READ_lower) == 7)   )   ) THEN
        def_beha = .TRUE.
      ELSE
        def_beha = .FALSE.
        len_str = LEN_TRIM(str_READ)
        epos = INDEX(str_READ,'e')
        ppos = INDEX(str_READ,'.')
!------
        IF (epos > 0) THEN
          WRITE(tl,'(I3.3)') len_str
          WRITE(dl,'(I3.3)') epos-ppos-1
          fmt='(e'//tl//'.'//dl//')'
          READ(str_READ,fmt) ret_val(it)
        ELSE IF (ppos > 0) THEN
          WRITE(tl,'(I3.3)') len_str
          WRITE(dl,'(I3.3)') len_str-ppos
          fmt='(f'//tl//'.'//dl//')'
          READ(str_READ,fmt) ret_val(it)
        ELSE
          WRITE(tl,'(I3.3)') len_str
          fmt = '(I'//tl//')'
          READ(str_READ,fmt) int_tmp
          ret_val(it) = REAL(int_tmp)
        ENDIF
      ENDIF
!----
      targetsiglist(pos) = -1
!-----
!---- Is this the value of a compressed field ?
!-----
      IF (compline(pos) > 0) THEN
        IF (compline(pos) == nb_to_ret) THEN
          compressed = .TRUE.
          compvalue = ret_val(it)
        ELSE
          WRITE(*,*) 'WARNING from getfilr'
          WRITE(*,*) 'For key ',TRIM(TARGET), &
 & ' we have a compressed field but which does not have the right size.'
          WRITE(*,*) 'We will try to fix that '
          compressed = .TRUE.
          compvalue = ret_val(it)
        ENDIF
      ENDIF
    ELSE
      found(it) = .FALSE.
    ENDIF
  ENDDO
!--
! If this is a compressed field then we will uncompress it
!--
  IF (compressed) THEN
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        ret_val(it) = compvalue
        found(it) = .TRUE.
      ENDIF
    ENDDO
  ENDIF
!-
! Now we get the status for what we found
!-
  IF (def_beha) THEN
    status = 2
    WRITE(*,*) 'USING DEFAULT BEHAVIOUR FOR ',TRIM(TARGET)
  ELSE
    status_cnt = 0
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        status_cnt = status_cnt+1
        IF (nb_to_ret > 1) THEN
          WRITE(str_tmp,'(a,"__",I3.3)') TRIM(TARGET),it
        ELSE
          str_tmp = TRIM(TARGET)
        ENDIF
        WRITE(*,*) 'USING DEFAULTS : ',TRIM(str_tmp),'=',ret_val(it)
      ENDIF
    ENDDO
!---
    IF (status_cnt == 0) THEN
      status = 1
    ELSE IF (status_cnt == nb_to_ret) THEN
      status = 2
    ELSE
      status = 3
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getfilr
!-
!=== INTEGER INTERFACES
!-
SUBROUTINE getinis (TARGET,ret_val)
!---------------------------------------------------------------------
!- Get a interer scalar. We first check if we find it
!- in the database and if not we get it from the run.def
!-
!- getini1d and getini2d are written on the same pattern
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER :: ret_val
!-
  INTEGER,DIMENSION(1) :: tmp_ret_val
  INTEGER :: target_sig, pos, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  tmp_ret_val(1) = ret_val
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfili (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwi (TARGET,target_sig,status,fileorig,1,tmp_ret_val)
    ELSE
!-- Get the value out of the database
    CALL getdbri (pos,1,TARGET,tmp_ret_val)
  ENDIF
  ret_val = tmp_ret_val(1)
!---------------------
END SUBROUTINE getinis
!-
!===
!-
SUBROUTINE getini1d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinis for details. It is the same thing but for a vector
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER,DIMENSION(:) :: ret_val
!-
  INTEGER,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig, pos, size_of_in, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
  tmp_ret_val(1:size_of_in) = ret_val(1:size_of_in)
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfili (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwi &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbri (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
  ret_val(1:size_of_in) = tmp_ret_val(1:size_of_in)
!----------------------
END SUBROUTINE getini1d
!-
!===
!-
SUBROUTINE getini2d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinis for details. It is the same thing but for a matrix
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER,DIMENSION(:,:) :: ret_val
!-
  INTEGER,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig,pos,size_of_in,size_1,size_2,status=0,fileorig
  INTEGER :: jl, jj, ji
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  size_1 = SIZE(ret_val,1)
  size_2 = SIZE(ret_val,2)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      tmp_ret_val(jl) = ret_val(ji,jj)
    ENDDO
  ENDDO
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfili (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwi &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbri (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      ret_val(ji,jj) = tmp_ret_val(jl)
    ENDDO
  ENDDO
!----------------------
END SUBROUTINE getini2d
!-
!===
!-
SUBROUTINE getfili (TARGET,status,fileorig,ret_val)
!---------------------------------------------------------------------
!- Subroutine that will extract from the file the values
!- attributed to the keyword target
!-
!- INTEGER
!- -------
!-
!- target   : in  : CHARACTER(LEN=*)  target for which we will
!-                                    look in the file
!- status   : out : INTEGER tells us from where we obtained the data
!- fileorig : out : The index of the file from which the key comes
!- ret_val  : out : INTEGER(nb_to_ret) values read
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER :: status, fileorig
  INTEGER :: ret_val(:)
!-
  INTEGER :: nb_to_ret
  INTEGER :: it, pos, len_str, status_cnt
  CHARACTER(LEN=3)  :: cnt, chlen
  CHARACTER(LEN=10) ::  fmt
  CHARACTER(LEN=30) :: full_target
  CHARACTER(LEN=80) :: str_READ, str_READ_lower, str_tmp
  INTEGER :: full_target_sig
  INTEGER :: compvalue
!-
  INTEGER,SAVE :: max_len = 0
  LOGICAL,SAVE,ALLOCATABLE :: found(:)
  LOGICAL :: def_beha
  LOGICAL :: compressed = .FALSE.
!---------------------------------------------------------------------
  nb_to_ret = SIZE(ret_val)
  CALL getin_read
!-
! Get the variables and memory we need
!-
  IF (max_len == 0) THEN
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  IF (max_len < nb_to_ret) THEN
    DEALLOCATE(found)
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  found(:) = .FALSE.
!-
! See what we find in the files read
!-
  DO it=1,nb_to_ret
!---
!-- First try the target as it is
!---
    full_target = TARGET(1:len_TRIM(target))
    CALL gensig (full_target,full_target_sig)
    CALL find_sig (nb_lines,targetlist,full_target, &
 &                 targetsiglist,full_target_sig,pos)
!---
!-- Another try
!---
    IF (pos < 0) THEN
      WRITE(cnt,'(I3.3)') it
      full_target = TARGET(1:len_TRIM(target))//'__'//cnt
      CALL gensig (full_target,full_target_sig)
      CALL find_sig (nb_lines,targetlist,full_target, &
 &                   targetsiglist,full_target_sig,pos)
    ENDIF
!---
!-- A priori we dont know from which file the target could come.
!-- Thus by default we attribute it to the first file :
!---
    fileorig = 1
!-
    IF (pos > 0) THEN
!-----
      found(it) = .TRUE.
      fileorig = fromfile(pos)
!-----
!---- DECODE
!----
      str_READ = TRIM(ADJUSTL(fichier(pos)))
      str_READ_lower = str_READ
      CALL strlowercase (str_READ_lower)
!-----
      IF (    (     (INDEX(str_READ_lower,'def') == 1)     &
 &             .AND.(LEN_TRIM(str_READ_lower) == 3)   )    &
 &        .OR.(     (INDEX(str_READ_lower,'default') == 1) &
 &             .AND.(LEN_TRIM(str_READ_lower) == 7)   )   ) THEN
        def_beha = .TRUE.
      ELSE
        def_beha = .FALSE.
        len_str = LEN_TRIM(str_READ)
        WRITE(chlen,'(I3.3)') len_str
        fmt = '(I'//chlen//')'
        READ(str_READ,fmt) ret_val(it)
      ENDIF
!-----
      targetsiglist(pos) = -1
!-----
!---- Is this the value of a compressed field ?
!-----
      IF (compline(pos) > 0) THEN
        IF (compline(pos) == nb_to_ret) THEN
          compressed = .TRUE.
          compvalue = ret_val(it)
        ELSE
          WRITE(*,*) 'WARNING from getfilr'
          WRITE(*,*) 'For key ',TRIM(TARGET), &
 & ' we have a compressed field but which does not have the right size.'
          WRITE(*,*) 'We will try to fix that '
          compressed = .TRUE.
          compvalue = ret_val(it)
        ENDIF
      ENDIF
    ELSE
      found(it) = .FALSE.
    ENDIF
  ENDDO
!-
! If this is a compressed field then we will uncompress it
!-
  IF (compressed) THEN
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        ret_val(it) = compvalue
        found(it) = .TRUE.
      ENDIF
    ENDDO
  ENDIF
!-
! Now we get the status for what we found
!-
  IF (def_beha) THEN
    status = 2
    WRITE(*,*) 'USING DEFAULT BEHAVIOUR FOR ',TRIM(TARGET)
  ELSE
    status_cnt = 0
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        status_cnt = status_cnt+1
        IF (nb_to_ret > 1) THEN
          WRITE(str_tmp,'(a,"__",I3.3)') TRIM(TARGET),it
        ELSE
          str_tmp = TRIM(TARGET)
        ENDIF
        WRITE(*,*) 'USING DEFAULTS : ',TRIM(str_tmp),'=',ret_val(it)
      ENDIF
    ENDDO
!---
    IF (status_cnt == 0) THEN
      status = 1
    ELSE IF (status_cnt == nb_to_ret) THEN
      status = 2
    ELSE
      status = 3
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getfili
!-
!=== CHARACTER INTERFACES
!-
SUBROUTINE getincs (TARGET,ret_val)
!---------------------------------------------------------------------
!- Get a CHARACTER scalar. We first check if we find it
!- in the database and if not we get it from the run.def
!-
!- getinc1d and getinc2d are written on the same pattern
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  CHARACTER(LEN=*) :: ret_val
!-
  CHARACTER(LEN=100),DIMENSION(1) :: tmp_ret_val
  INTEGER :: target_sig, pos, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  tmp_ret_val(1) = ret_val
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfilc (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwc (TARGET,target_sig,status,fileorig,1,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrc (pos,1,TARGET,tmp_ret_val)
  ENDIF
  ret_val = tmp_ret_val(1)
!---------------------
END SUBROUTINE getincs
!-
!===
!-
SUBROUTINE getinc1d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getincs for details. It is the same thing but for a vector
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  CHARACTER(LEN=*),DIMENSION(:) :: ret_val
!-
  CHARACTER(LEN=100),DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig, pos, size_of_in, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
  tmp_ret_val(1:size_of_in) = ret_val(1:size_of_in)
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfilc (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwc &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrc (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
  ret_val(1:size_of_in) = tmp_ret_val(1:size_of_in)
!----------------------
END SUBROUTINE getinc1d
!-
!===
!-
SUBROUTINE getinc2d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getincs for details. It is the same thing but for a matrix
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  CHARACTER(LEN=*),DIMENSION(:,:) :: ret_val
!-
  CHARACTER(LEN=100),DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig,pos,size_of_in,size_1,size_2,status=0,fileorig
  INTEGER :: jl,jj,ji
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  size_1 = SIZE(ret_val,1)
  size_2 = SIZE(ret_val,2)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      tmp_ret_val(jl) = ret_val(ji,jj)
    ENDDO
  ENDDO
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfilc (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwc &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrc (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      ret_val(ji,jj) = tmp_ret_val(jl)
    ENDDO
  ENDDO
!----------------------
END SUBROUTINE getinc2d
!-
!===
!-
SUBROUTINE getfilc (TARGET,status,fileorig,ret_val)
!---------------------------------------------------------------------
!- Subroutine that will extract from the file the values
!- attributed to the keyword target
!-
!- CHARACTER
!- ---------
!-
!- target   : in  : CHARACTER(LEN=*)  target for which we will
!-                                    look in the file
!- status   : out : INTEGER tells us from where we obtained the data
!- fileorig : out : The index of the file from which the key comes
!- ret_val  : out : CHARACTER(nb_to_ret) values read
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER :: status, fileorig
  CHARACTER(LEN=*),DIMENSION(:) :: ret_val
!-
  INTEGER :: nb_to_ret
  INTEGER :: it, pos, len_str, status_cnt
  CHARACTER(LEN=3)  :: cnt
  CHARACTER(LEN=30) :: full_target
  CHARACTER(LEN=80) :: str_READ, str_READ_lower, str_tmp
  INTEGER :: full_target_sig
!-
  INTEGER,SAVE :: max_len = 0
  LOGICAL,DIMENSION(:),SAVE,ALLOCATABLE :: found
  LOGICAL :: def_beha
!---------------------------------------------------------------------
  nb_to_ret = SIZE(ret_val)
  CALL getin_read
!-
! Get the variables and memory we need
!-
  IF (max_len == 0) THEN
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  IF (max_len < nb_to_ret) THEN
    DEALLOCATE(found)
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  found(:) = .FALSE.
!-
! See what we find in the files read
!-
  DO it=1,nb_to_ret
!---
!-- First try the target as it is
    full_target = TARGET(1:len_TRIM(target))
    CALL gensig (full_target,full_target_sig)
    CALL find_sig (nb_lines,targetlist,full_target, &
 &                 targetsiglist,full_target_sig,pos)
!---
!-- Another try
!---
    IF (pos < 0) THEN
      WRITE(cnt,'(I3.3)') it
      full_target = TARGET(1:len_TRIM(target))//'__'//cnt
      CALL gensig (full_target,full_target_sig)
      CALL find_sig (nb_lines,targetlist,full_target, &
 &                   targetsiglist,full_target_sig,pos)
    ENDIF
!---
!-- A priori we dont know from which file the target could come.
!-- Thus by default we attribute it to the first file :
!---
    fileorig = 1
!---
    IF (pos > 0) THEN
!-----
      found(it) = .TRUE.
      fileorig = fromfile(pos)
!-----
!---- DECODE
!-----
      str_READ = TRIM(ADJUSTL(fichier(pos)))
      str_READ_lower = str_READ
      CALL strlowercase (str_READ_lower)
!-----
      IF (    (     (INDEX(str_READ_lower,'def') == 1)     &
 &             .AND.(LEN_TRIM(str_READ_lower) == 3)   )    &
 &        .OR.(     (INDEX(str_READ_lower,'default') == 1) &
 &             .AND.(LEN_TRIM(str_READ_lower) == 7)   )   ) THEN
        def_beha = .TRUE.
      ELSE
        def_beha = .FALSE.
        len_str = LEN_TRIM(str_READ)
        ret_val(it) = str_READ(1:len_str)
      ENDIF
!-----
      targetsiglist(pos) = -1
!-----
    ELSE
      found(it) = .FALSE.
    ENDIF
  ENDDO
!-
! Now we get the status for what we found
!-
  IF (def_beha) THEN
    status = 2
    WRITE(*,*) 'USING DEFAULT BEHAVIOUR FOR ',TRIM(TARGET)
  ELSE
    status_cnt = 0
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        status_cnt = status_cnt+1
        IF (nb_to_ret > 1) THEN
          WRITE(str_tmp,'(a,"__",I3.3)') TRIM(TARGET),it
        ELSE
          str_tmp = TARGET(1:len_TRIM(target))
        ENDIF
        WRITE(*,*) 'USING DEFAULTS : ',TRIM(str_tmp),'=',ret_val(it)
      ENDIF
    ENDDO
!-
    IF (status_cnt == 0) THEN
      status = 1
    ELSE IF (status_cnt == nb_to_ret) THEN
      status = 2
    ELSE
      status = 3
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getfilc
!-
!=== LOGICAL INTERFACES
!-
SUBROUTINE getinls (TARGET,ret_val)
!---------------------------------------------------------------------
!- Get a logical scalar. We first check if we find it
!- in the database and if not we get it from the run.def
!-
!- getinl1d and getinl2d are written on the same pattern
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  LOGICAL :: ret_val
!-
  LOGICAL,DIMENSION(1) :: tmp_ret_val
  INTEGER :: target_sig, pos, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  tmp_ret_val(1) = ret_val
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfill (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwl (TARGET,target_sig,status,fileorig,1,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrl (pos,1,TARGET,tmp_ret_val)
  ENDIF
  ret_val = tmp_ret_val(1)
!---------------------
END SUBROUTINE getinls
!-
!===
!-
SUBROUTINE getinl1d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinls for details. It is the same thing but for a vector
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  LOGICAL,DIMENSION(:) :: ret_val
!-
  LOGICAL,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig, pos, size_of_in, status=0, fileorig
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
  tmp_ret_val(1:size_of_in) = ret_val(1:size_of_in)
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfill (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwl &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrl (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
  ret_val(1:size_of_in) = tmp_ret_val(1:size_of_in)
!----------------------
END SUBROUTINE getinl1d
!-
!===
!-
SUBROUTINE getinl2d (TARGET,ret_val)
!---------------------------------------------------------------------
!- See getinls for details. It is the same thing but for a matrix
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  LOGICAL,DIMENSION(:,:) :: ret_val
!-
  LOGICAL,DIMENSION(:),ALLOCATABLE,SAVE :: tmp_ret_val
  INTEGER,SAVE :: tmp_ret_size = 0
  INTEGER :: target_sig,pos,size_of_in,size_1,size_2,status=0,fileorig
  INTEGER :: jl,jj,ji
!---------------------------------------------------------------------
!-
! Compute the signature of the target
!-
  CALL gensig (TARGET,target_sig)
!-
! Do we have this target in our database ?
!-
  CALL find_sig (nb_keys,keystr,target,keysig,target_sig,pos)
!-
  size_of_in = SIZE(ret_val)
  size_1 = SIZE(ret_val,1)
  size_2 = SIZE(ret_val,2)
  IF (.NOT.ALLOCATED(tmp_ret_val)) THEN
    ALLOCATE (tmp_ret_val(size_of_in))
  ELSE IF (size_of_in > tmp_ret_size) THEN
    DEALLOCATE (tmp_ret_val)
    ALLOCATE (tmp_ret_val(size_of_in))
    tmp_ret_size = size_of_in
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      tmp_ret_val(jl) = ret_val(ji,jj)
    ENDDO
  ENDDO
!-
  IF (pos < 0) THEN
!-- Ge the information out of the file
    CALL getfill (TARGET,status,fileorig,tmp_ret_val)
!-- Put the data into the database
    CALL getdbwl &
 &   (TARGET,target_sig,status,fileorig,size_of_in,tmp_ret_val)
  ELSE
!-- Get the value out of the database
    CALL getdbrl (pos,size_of_in,TARGET,tmp_ret_val)
  ENDIF
!-
  jl=0
  DO jj=1,size_2
    DO ji=1,size_1
      jl=jl+1
      ret_val(ji,jj) = tmp_ret_val(jl)
    ENDDO
  ENDDO
!----------------------
END SUBROUTINE getinl2d
!-
!===
!-
SUBROUTINE getfill (TARGET,status,fileorig,ret_val)
!---------------------------------------------------------------------
!- Subroutine that will extract from the file the values
!- attributed to the keyword target
!-
!- LOGICAL
!- -------
!-
!- target   : in  : CHARACTER(LEN=*)  target for which we will
!-                                    look in the file
!- status   : out : INTEGER tells us from where we obtained the data
!- fileorig : out : The index of the file from which the key comes
!- ret_val  : out : LOGICAL(nb_to_ret) values read
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: TARGET
  INTEGER :: status, fileorig
  LOGICAL,DIMENSION(:) :: ret_val
!-
  INTEGER :: nb_to_ret
  INTEGER :: it, pos, len_str, ipos_tr, ipos_fl, status_cnt
  CHARACTER(LEN=3)  :: cnt
  CHARACTER(LEN=30) :: full_target
  CHARACTER(LEN=80) :: str_READ, str_READ_lower, str_tmp
  INTEGER :: full_target_sig
!-
  INTEGER,SAVE :: max_len = 0
  LOGICAL,DIMENSION(:),SAVE,ALLOCATABLE :: found
  LOGICAL :: def_beha
!---------------------------------------------------------------------
  nb_to_ret = SIZE(ret_val)
  CALL getin_read
!-
! Get the variables and memory we need
!-
  IF (max_len == 0) THEN
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  IF (max_len < nb_to_ret) THEN
    DEALLOCATE(found)
    ALLOCATE(found(nb_to_ret))
    max_len = nb_to_ret
  ENDIF
  found(:) = .FALSE.
!-
! See what we find in the files read
!-
  DO it=1,nb_to_ret
!---
!-- First try the target as it is
!---
    full_target = TARGET(1:len_TRIM(target))
    CALL gensig (full_target,full_target_sig)
    CALL find_sig (nb_lines,targetlist,full_target, &
 &                 targetsiglist,full_target_sig,pos)
!---
!-- Another try
!---
    IF (pos < 0) THEN
      WRITE(cnt,'(I3.3)') it
      full_target = TARGET(1:len_TRIM(target))//'__'//cnt
      CALL gensig (full_target,full_target_sig)
      CALL find_sig (nb_lines,targetlist,full_target, &
 &                   targetsiglist,full_target_sig,pos)
    ENDIF
!---
!-- A priori we dont know from which file the target could come.
!-- Thus by default we attribute it to the first file :
!---
    fileorig = 1
!---
    IF (pos > 0) THEN
!-----
      found(it) = .TRUE.
      fileorig = fromfile(pos)
!-----
!---- DECODE
!-----
      str_READ = TRIM(ADJUSTL(fichier(pos)))
      str_READ_lower = str_READ
      CALL strlowercase (str_READ_lower)
!-----
      IF (    (     (INDEX(str_READ_lower,'def') == 1)     &
 &             .AND.(LEN_TRIM(str_READ_lower) == 3)   )    &
 &        .OR.(     (INDEX(str_READ_lower,'default') == 1) &
 &             .AND.(LEN_TRIM(str_READ_lower) == 7)   )   ) THEN
        def_beha = .TRUE.
      ELSE
        def_beha = .FALSE.
        len_str = LEN_TRIM(str_READ)
        ipos_tr = -1
        ipos_fl = -1
!-------
        ipos_tr = MAX(INDEX(str_READ,'tru'),INDEX(str_READ,'TRU'), &
 &                    INDEX(str_READ,'y'),INDEX(str_READ,'Y'))
        ipos_fl = MAX(INDEX(str_READ,'fal'),INDEX(str_READ,'FAL'), &
 &                    INDEX(str_READ,'n'),INDEX(str_READ,'N'))
!-------
        IF (ipos_tr > 0) THEN
          ret_val(it) = .TRUE.
        ELSE IF (ipos_fl > 0) THEN
          ret_val(it) = .FALSE.
        ELSE
          WRITE(*,*) "ERROR : getfill : TARGET ", &
 &                   TRIM(TARGET)," is not of logical value"
          STOP 'getinl'
        ENDIF
      ENDIF
!-----
      targetsiglist(pos) = -1
!-----
    ELSE
!-
      found(it) = .FALSE.
!-
    ENDIF
!-
  ENDDO
!-
! Now we get the status for what we found
!-
  IF (def_beha) THEN
    status = 2
    WRITE(*,*) 'USING DEFAULT BEHAVIOUR FOR ',TRIM(TARGET)
  ELSE
    status_cnt = 0
    DO it=1,nb_to_ret
      IF (.NOT. found(it)) THEN
        status_cnt = status_cnt+1
        IF (nb_to_ret > 1) THEN
          WRITE(str_tmp,'(a,"__",I3.3)') TRIM(TARGET),it
        ELSE
          str_tmp = TRIM(TARGET)
        ENDIF
        WRITE(*,*) 'USING DEFAULTS : ',TRIM(str_tmp),'=',ret_val(it)
      ENDIF
    ENDDO
!---
    IF (status_cnt == 0) THEN
      status = 1
    ELSE IF (status_cnt == nb_to_ret) THEN
      status = 2
    ELSE
      status = 3
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getfill
!-
!===
!-
SUBROUTINE getin_read
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER,SAVE :: allread=0
  INTEGER,SAVE :: current,i
!---------------------------------------------------------------------
  IF (allread == 0) THEN
!-- Allocate a first set of memory.
    CALL getin_allockeys
    CALL getin_allocmem (1,0)
    CALL getin_allocmem (2,0)
    CALL getin_allocmem (3,0)
    CALL getin_allocmem (4,0)
!-- Start with reading the files
    nbfiles = 1
    filelist(1) = 'run.def'
    current = 1
    nb_lines = 0
!--
    DO WHILE (current <= nbfiles)
      CALL getin_readdef (current)
      current = current+1
    ENDDO
    allread = 1
    CALL getin_checkcohe ()
  ENDIF
!------------------------
END SUBROUTINE getin_read
!-
!===
!-
  SUBROUTINE getin_readdef(current)
!---------------------------------------------------------------------
!- This subroutine will read the files and only keep the
!- the relevant information. The information is kept as it
!- found in the file. The data will be analysed later.
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: current
!-
  CHARACTER(LEN=100) :: READ_str, NEW_str, new_key, last_key, key_str
  CHARACTER(LEN=3) :: cnt
  INTEGER :: nb_lastkey
!-
  INTEGER :: eof, ptn, len_str, i, it, iund
  LOGICAL :: check = .FALSE.
!---------------------------------------------------------------------
  eof = 0
  ptn = 1
  nb_lastkey = 0
!-
  IF (check) THEN
    WRITE(*,*) 'getin_readdef : Open file ',TRIM(filelist(current))
  ENDIF
!-
  OPEN (22,file=filelist(current),ERR=9997,STATUS="OLD")
!-
  DO WHILE (eof /= 1)
!---
    CALL getin_skipafew (22,READ_str,eof,nb_lastkey)
    len_str = LEN_TRIM(READ_str)
    ptn = INDEX(READ_str,'=')
!---
    IF (ptn > 0) THEN
!---- Get the target
      key_str = TRIM(ADJUSTL(READ_str(1:ptn-1)))
!---- Make sure that if a vector keyword has the right length
      iund =  INDEX(key_str,'__')
      IF (iund > 0) THEN
        SELECTCASE( len_trim(key_str)-iund )
          CASE(2)
            READ(key_str(iund+2:len_trim(key_str)),'(I1)') it
          CASE(3)
            READ(key_str(iund+2:len_trim(key_str)),'(I2)') it
          CASE(4)
            READ(key_str(iund+2:len_trim(key_str)),'(I3)') it
          CASE DEFAULT
            it = -1
        END SELECT
        IF (it > 0) THEN
          WRITE(cnt,'(I3.3)') it
          key_str = key_str(1:iund+1)//cnt
        ELSE
          WRITE(*,*) &
 &          'getin_readdef : A very strange key has just been found'
          WRITE(*,*) 'getin_readdef : ',key_str(1:len_TRIM(key_str))
          STOP 'getin_readdef'
        ENDIF
      ENDIF
!---- Prepare the content
      NEW_str = TRIM(ADJUSTL(READ_str(ptn+1:len_str)))
      CALL nocomma (NEW_str)
      CALL cmpblank (NEW_str)
      NEW_str  = TRIM(ADJUSTL(NEW_str))
      IF (check) THEN
        WRITE(*,*) &
 &        '--> getin_readdef : ',TRIM(key_str),' :: ',TRIM(NEW_str)
      ENDIF
!---- Decypher the content of NEW_str
!-
!---- This has to be a new key word, thus :
      nb_lastkey = 0
!----
      CALL getin_decrypt (current,key_str,NEW_str,last_key,nb_lastkey)
!----
    ELSE IF (len_str > 0) THEN
!---- Prepare the key if we have an old one to which
!---- we will add the line just read
      IF (nb_lastkey > 0) THEN
        iund =  INDEX(last_key,'__')
        IF (iund > 0) THEN
!-------- We only continue a keyword, thus it is easy
          key_str = last_key(1:iund-1)
        ELSE
          IF (nb_lastkey /= 1) THEN
            WRITE(*,*) &
 &   'getin_readdef : An error has occured. We can not have a scalar'
            WRITE(*,*) 'getin_readdef : keywod and a vector content'
            STOP 'getin_readdef'
          ENDIF
!-------- The last keyword needs to be transformed into a vector.
          targetlist(nb_lines) = &
 &          last_key(1:MIN(len_trim(last_key),30))//'__001'
          CALL gensig (targetlist(nb_lines),targetsiglist(nb_lines))
          key_str = last_key(1:len_TRIM(last_key))
        ENDIF
      ENDIF
!---- Prepare the content
      NEW_str = TRIM(ADJUSTL(READ_str(1:len_str)))
      CALL getin_decrypt (current,key_str,NEW_str,last_key,nb_lastkey)
    ELSE
!---- If we have an empty line the the keyword finishes
      nb_lastkey = 0
      IF (check) THEN
        WRITE(*,*) 'getin_readdef : Have found an emtpy line '
      ENDIF
    ENDIF
  ENDDO
!-
  CLOSE(22)
!-
  IF (check) THEN
    OPEN (22,file='run.def.test')
    DO i=1,nb_lines
      WRITE(22,*) targetlist(i)," : ",fichier(i)
    ENDDO
    CLOSE(22)
  ENDIF
!-
  RETURN
!-
9997 WRITE(*,*) "getin_readdef : Could not open file ", &
          & TRIM(filelist(current))
!---------------------------
END SUBROUTINE getin_readdef
!-
!===
!-
SUBROUTINE getin_decrypt(current,key_str,NEW_str,last_key,nb_lastkey)
!---------------------------------------------------------------------
!- This subroutine is going to decypher the line.
!- It essentialy checks how many items are included and
!- it they can be attached to a key.
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
! ARGUMENTS
!-
  INTEGER :: current, nb_lastkey
  CHARACTER(LEN=*) :: key_str, NEW_str, last_key
!-
! LOCAL
!-
  INTEGER :: len_str, blk, nbve, starpos
  CHARACTER(LEN=100) :: tmp_str, new_key, mult
  CHARACTER(LEN=3)   :: cnt, chlen
  CHARACTER(LEN=10)  :: fmt
!---------------------------------------------------------------------
  len_str = LEN_TRIM(NEW_str)
  blk = INDEX(NEW_str(1:len_str),' ')
  tmp_str = NEW_str(1:len_str)
!-
! If the key is a new file then we take it up. Else
! we save the line and go on.
!-
  IF (INDEX(key_str,'INCLUDEDEF') > 0) THEN
    DO WHILE (blk > 0)
      IF (nbfiles+1 > max_files) THEN
        WRITE(*,*) 'FATAL ERROR : Too many files to include'
        STOP 'getin_readdef'
      ENDIF
!-----
      nbfiles = nbfiles+1
      filelist(nbfiles) = tmp_str(1:blk)
!-----
      tmp_str = TRIM(ADJUSTL(tmp_str(blk+1:LEN_TRIM(tmp_str))))
      blk = INDEX(tmp_str(1:LEN_TRIM(tmp_str)),' ')
    ENDDO
!---
    IF (nbfiles+1 > max_files) THEN
      WRITE(*,*) 'FATAL ERROR : Too many files to include'
      STOP 'getin_readdef'
    ENDIF
!---
    nbfiles =  nbfiles+1
    filelist(nbfiles) = TRIM(ADJUSTL(tmp_str))
!---
    last_key = 'INCLUDEDEF'
    nb_lastkey = 1
  ELSE
!-
!-- We are working on a new line of input
!-
    nb_lines = nb_lines+1
    IF (nb_lines > max_lines) THEN
      WRITE(*,*) &
 &      'Too many line in the run.def files. You need to increase'
      WRITE(*,*) 'the parameter max_lines in the module getincom.'
      STOP 'getin_decrypt'
    ENDIF
!-
!-- First we solve the issue of conpressed information. Once
!-- this is done all line can be handled in the same way.
!-
    starpos = INDEX(NEW_str(1:len_str),'*')
    IF ( (starpos > 0).AND.(tmp_str(1:1) /= '"') &
 &                    .AND.(tmp_str(1:1) /= "'") ) THEN
!-----
      IF (INDEX(key_str(1:len_TRIM(key_str)),'__') > 0) THEN
        WRITE(*,*) 'ERROR : getin_decrypt'
        WRITE(*,*) &
&         'We can not have a compressed field of values for in a'
        WRITE(*,*) &
&         'vector notation. If a target is of the type TARGET__1'
        WRITE(*,*) 'then only a scalar value is allowed'
        WRITE(*,*) 'The key at fault : ',key_str(1:len_TRIM(key_str))
        STOP 'getin_decrypt'
      ENDIF
!-
!---- Read the multiplied
!-
      mult = TRIM(ADJUSTL(NEW_str(1:starpos-1)))
!---- Construct the new string and its parameters
      NEW_str = TRIM(ADJUSTL(NEW_str(starpos+1:len_str)))
      len_str = LEN_TRIM(NEW_str)
      blk = INDEX(NEW_str(1:len_str),' ')
      IF (blk > 1) THEN
        WRITE(*,*) &
 &       'This is a strange behavior of getin_decrypt you could report'
      ENDIF
      WRITE(chlen,'(I3.3)') LEN_TRIM(mult)
      fmt = '(I'//chlen//')'
      READ(mult,fmt) compline(nb_lines)
!---
    ELSE
      compline(nb_lines) = -1
    ENDIF
!-
!-- If there is no space wthin the line then the target is a scalar
!-- or the element of a properly written vector.
!-- (ie of the type TARGET__1)
!-
    IF (    (blk <= 1) &
 &      .OR.(tmp_str(1:1) == '"') &
 &      .OR.(tmp_str(1:1) == "'") ) THEN
!-
      IF (nb_lastkey == 0) THEN
!------ Save info of current keyword as a scalar
!------ if it is not a continuation
        targetlist(nb_lines) = key_str(1:MIN(len_trim(key_str),30))
        last_key = key_str(1:MIN(len_trim(key_str),30))
        nb_lastkey = 1
      ELSE
!------ We are continuing a vector so the keyword needs
!------ to get the underscores
        WRITE(cnt,'(I3.3)') nb_lastkey+1
        targetlist(nb_lines) = &
 &        key_str(1:MIN(len_trim(key_str),25))//'__'//cnt
        last_key = key_str(1:MIN(len_trim(key_str),25))//'__'//cnt
        nb_lastkey = nb_lastkey+1
      ENDIF
!-----
      CALL gensig (targetlist(nb_lines),targetsiglist(nb_lines))
      fichier(nb_lines) = NEW_str(1:len_str)
      fromfile(nb_lines) = current
    ELSE
!-
!---- If there are blanks whithin the line then we are dealing
!---- with a vector and we need to split it in many entries
!---- with the TRAGET__1 notation.
!----
!---- Test if the targer is not already a vector target !
!-
      IF (INDEX(TRIM(key_str),'__') > 0) THEN
        WRITE(*,*) 'ERROR : getin_decrypt'
        WRITE(*,*) 'We have found a mixed vector notation'
        WRITE(*,*) 'If a target is of the type TARGET__1'
        WRITE(*,*) 'then only a scalar value is allowed'
        WRITE(*,*) 'The key at fault : ',key_str(1:len_TRIM(key_str))
        STOP 'getin_decrypt'
      ENDIF
!-
      nbve = nb_lastkey
      nbve = nbve+1
      WRITE(cnt,'(I3.3)') nbve
!-
      DO WHILE (blk > 0)
!-
!------ Save the content of target__nbve
!-
        fichier(nb_lines) = tmp_str(1:blk)
        new_key =  key_str(1:MIN(len_trim(key_str),25))//'__'//cnt
        targetlist(nb_lines) = new_key(1:MIN(len_trim(new_key),30))
        CALL gensig (targetlist(nb_lines),targetsiglist(nb_lines))
        fromfile(nb_lines) = current
!-
        tmp_str = TRIM(ADJUSTL(tmp_str(blk+1:LEN_TRIM(tmp_str))))
        blk = INDEX(TRIM(tmp_str),' ')
!-
        nb_lines = nb_lines+1
        IF (nb_lines > max_lines) THEN
          WRITE(*,*) &
 &          'Too many line in the run.def files. You need to increase'
          WRITE(*,*) 'the parameter max_lines in the module getincom.'
          STOP 'getin_decrypt'
        ENDIF
        nbve = nbve+1
        WRITE(cnt,'(I3.3)') nbve
!-
      ENDDO
!-
!---- Save the content of the last target
!-
      fichier(nb_lines) = tmp_str(1:LEN_TRIM(tmp_str))
      new_key = key_str(1:MIN(len_trim(key_str),25))//'__'//cnt
      targetlist(nb_lines) = new_key(1:MIN(len_trim(new_key),30))
      CALL gensig (targetlist(nb_lines),targetsiglist(nb_lines))
      fromfile(nb_lines) = current
!-
      last_key = key_str(1:MIN(len_trim(key_str),25))//'__'//cnt
      nb_lastkey = nbve
!-
    ENDIF
!-
  ENDIF
!---------------------------
END SUBROUTINE getin_decrypt
!-
!===
!-
SUBROUTINE getin_checkcohe ()
!---------------------------------------------------------------------
!- This subroutine checks for redundancies.
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
! Arguments
!-
!-
! LOCAL
!-
  INTEGER :: line,i,sig
  INTEGER :: found
  CHARACTER(LEN=30) :: str
!---------------------------------------------------------------------
  DO line=1,nb_lines-1
!-
    CALL find_sig &
 &    (nb_lines-line,targetlist(line+1:nb_lines),targetlist(line), &
 &     targetsiglist(line+1:nb_lines),targetsiglist(line),found)
!---
!-- IF we have found it we have a problem to solve.
!---
    IF (found > 0) THEN
      WRITE(*,*) 'COUNT : ', &
 &  COUNT(ABS(targetsiglist(line+1:nb_lines)-targetsiglist(line)) < 1)
!-----
      WRITE(*,*) &
 & 'getin_checkcohe : Found a problem on key ',targetlist(line)
      WRITE(*,*) &
 & 'getin_checkcohe : The following values were encoutered :'
      WRITE(*,*) &
 & '                ',TRIM(targetlist(line)), &
 &               targetsiglist(line),' == ',fichier(line)
      WRITE(*,*) &
 & '                ',TRIM(targetlist(line+found)), &
 &               targetsiglist(line+found),' == ',fichier(line+found)
      WRITE(*,*) &
 & 'getin_checkcohe : We will keep only the last value'
!-----
      targetsiglist(line) = 1
    ENDIF
  ENDDO
!-
END SUBROUTINE getin_checkcohe
!-
!===
!-
SUBROUTINE getin_skipafew (unit,out_string,eof,nb_lastkey)
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: unit, eof, nb_lastkey
  CHARACTER(LEN=100) :: dummy
  CHARACTER(LEN=100) :: out_string
  CHARACTER(LEN=1) :: first
!---------------------------------------------------------------------
  first="#"
  eof = 0
  out_string = "    "
!-
  DO WHILE (first == "#")
    READ (unit,'(a100)',ERR=9998,END=7778) dummy
    dummy = TRIM(ADJUSTL(dummy))
    first=dummy(1:1)
    IF (first == "#") THEN
      nb_lastkey = 0
    ENDIF
  ENDDO
  out_string=dummy
!-
  RETURN
!-
9998 WRITE(*,*) " GETIN_SKIPAFEW : Error while reading file "
  STOP 'getin_skipafew'
!-
7778 eof = 1
!----------------------------
END SUBROUTINE getin_skipafew
!-
!=== INTEGER database INTERFACE
!-
SUBROUTINE getdbwi &
 &  (target,target_sig,status,fileorig,size_of_in,tmp_ret_val)
!---------------------------------------------------------------------
!- Write the INTEGER data into the data base
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: target
  INTEGER :: target_sig, status, fileorig, size_of_in
  INTEGER,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
!-
! First check if we have sufficiant space for the new key
!-
  IF (nb_keys+1 > keymemsize) THEN
    CALL getin_allockeys ()
  ENDIF
!-
! Fill out the items of the data base
!-
  nb_keys = nb_keys+1
  keysig(nb_keys) = target_sig
  keystr(nb_keys) = target(1:MIN(len_trim(target),30))
  keystatus(nb_keys) = status
  keytype(nb_keys) = 1
  keyfromfile(nb_keys) = fileorig
!-
! Can we compress the data base entry ?
!-
  IF (     (MINVAL(tmp_ret_val) == MAXVAL(tmp_ret_val)) &
 &    .AND.(size_of_in > compress_lim)) THEN
    keymemstart(nb_keys) = intmempos+1
    keycompress(nb_keys) = size_of_in
    keymemlen(nb_keys) = 1
  ELSE
    keymemstart(nb_keys) = intmempos+1
    keycompress(nb_keys) = -1
    keymemlen(nb_keys) = size_of_in
  ENDIF
!-
! Before writing the actual size lets see if we have the space
!-
  IF (keymemstart(nb_keys)+keymemlen(nb_keys) > intmemsize) THEN
    CALL getin_allocmem (1,keymemlen(nb_keys))
  ENDIF
!-
  intmem(keymemstart(nb_keys): &
 &       keymemstart(nb_keys)+keymemlen(nb_keys)-1) = &
 &  tmp_ret_val(1:keymemlen(nb_keys))
  intmempos = keymemstart(nb_keys)+keymemlen(nb_keys)-1
!---------------------
END SUBROUTINE getdbwi
!-
!===
!-
SUBROUTINE getdbri (pos,size_of_in,target,tmp_ret_val)
!---------------------------------------------------------------------
!- Read the required variables in the database for INTEGERS
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: pos, size_of_in
  CHARACTER(LEN=*) :: target
  INTEGER,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
  IF (keytype(pos) /= 1) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong data type for keyword ',target
    STOP 'getdbri'
  ENDIF
!-
  IF (keycompress(pos) > 0) THEN
    IF ( keycompress(pos) /= size_of_in .OR. keymemlen(pos) /= 1 ) THEN
      WRITE(*,*) &
 &      'FATAL ERROR : Wrong compression length for keyword ',target
      STOP 'getdbri'
    ELSE
      tmp_ret_val(1:size_of_in) = intmem(keymemstart(pos))
    ENDIF
  ELSE
    IF (keymemlen(pos) /= size_of_in) THEN
      WRITE(*,*) 'FATAL ERROR : Wrong array length for keyword ',target
      STOP 'getdbri'
    ELSE
      tmp_ret_val(1:size_of_in) = &
 &      intmem(keymemstart(pos):keymemstart(pos)+keymemlen(pos)-1)
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getdbri
!-
!=== REAL database INTERFACE
!-
SUBROUTINE getdbwr &
 &  (target,target_sig,status,fileorig,size_of_in,tmp_ret_val)
!---------------------------------------------------------------------
!- Write the REAL data into the data base
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: target
  INTEGER :: target_sig, status, fileorig, size_of_in
  REAL,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
!-
! First check if we have sufficiant space for the new key
!-
  IF (nb_keys+1 > keymemsize) THEN
    CALL getin_allockeys ()
  ENDIF
!-
! Fill out the items of the data base
!-
  nb_keys = nb_keys+1
  keysig(nb_keys) = target_sig
  keystr(nb_keys) = target(1:MIN(len_trim(target),30))
  keystatus(nb_keys) = status
  keytype(nb_keys) = 2
  keyfromfile(nb_keys) = fileorig
!-
! Can we compress the data base entry ?
!-
  IF (     (MINVAL(tmp_ret_val) == MAXVAL(tmp_ret_val)) &
&     .AND.(size_of_in > compress_lim)) THEN
    keymemstart(nb_keys) = realmempos+1
    keycompress(nb_keys) = size_of_in
    keymemlen(nb_keys) = 1
  ELSE
    keymemstart(nb_keys) = realmempos+1
    keycompress(nb_keys) = -1
    keymemlen(nb_keys) = size_of_in
  ENDIF
!-
! Before writing the actual size lets see if we have the space
!-
  IF (keymemstart(nb_keys)+keymemlen(nb_keys) > realmemsize) THEN
    CALL getin_allocmem (2,keymemlen(nb_keys))
  ENDIF
!-
  realmem(keymemstart(nb_keys): &
 &        keymemstart(nb_keys)+keymemlen(nb_keys)-1) = &
 &  tmp_ret_val(1:keymemlen(nb_keys))
  realmempos = keymemstart(nb_keys)+keymemlen(nb_keys)-1
!---------------------
END SUBROUTINE getdbwr
!-
!===
!-
SUBROUTINE getdbrr (pos,size_of_in,target,tmp_ret_val)
!---------------------------------------------------------------------
!- Read the required variables in the database for REALS
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: pos, size_of_in
  CHARACTER(LEN=*) :: target
  REAL,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
  IF (keytype(pos) /= 2) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong data type for keyword ',target
    STOP 'getdbrr'
  ENDIF
!-
  IF (keycompress(pos) > 0) THEN
    IF (    (keycompress(pos) /= size_of_in) &
 &      .OR.(keymemlen(pos) /= 1) ) THEN
      WRITE(*,*) &
 &      'FATAL ERROR : Wrong compression length for keyword ',target
      STOP 'getdbrr'
    ELSE
      tmp_ret_val(1:size_of_in) = realmem(keymemstart(pos))
    ENDIF
  ELSE
    IF (keymemlen(pos) /= size_of_in) THEN
      WRITE(*,*) 'FATAL ERROR : Wrong array length for keyword ',target
      STOP 'getdbrr'
    ELSE
      tmp_ret_val(1:size_of_in) = &
 &      realmem(keymemstart(pos):keymemstart(pos)+keymemlen(pos)-1)
    ENDIF
  ENDIF
!---------------------
END SUBROUTINE getdbrr
!-
!=== CHARACTER database INTERFACE
!-
SUBROUTINE getdbwc &
 &  (target,target_sig,status,fileorig,size_of_in,tmp_ret_val)
!---------------------------------------------------------------------
!- Write the CHARACTER data into the data base
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: target
  INTEGER :: target_sig,status,fileorig,size_of_in
  CHARACTER(LEN=*),DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
!-
! First check if we have sufficiant space for the new key
!-
  IF (nb_keys+1 > keymemsize) THEN
    CALL getin_allockeys ()
  ENDIF
!-
! Fill out the items of the data base
!-
  nb_keys = nb_keys+1
  keysig(nb_keys) = target_sig
  keystr(nb_keys) = target(1:MIN(len_trim(target),30))
  keystatus(nb_keys) = status
  keytype(nb_keys) = 3
  keyfromfile(nb_keys) = fileorig
  keymemstart(nb_keys) = charmempos+1
  keymemlen(nb_keys) = size_of_in
!-
! Before writing the actual size lets see if we have the space
!-
  IF (keymemstart(nb_keys)+keymemlen(nb_keys) > realmemsize) THEN
    CALL getin_allocmem (3,keymemlen(nb_keys))
  ENDIF
!-
  charmem(keymemstart(nb_keys): &
 &        keymemstart(nb_keys)+keymemlen(nb_keys)-1) = &
 &  tmp_ret_val(1:keymemlen(nb_keys))
  charmempos = keymemstart(nb_keys)+keymemlen(nb_keys)-1
!---------------------
END SUBROUTINE getdbwc
!-
!===
!-
SUBROUTINE getdbrc(pos,size_of_in,target,tmp_ret_val)
!---------------------------------------------------------------------
!- Read the required variables in the database for CHARACTER
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: pos, size_of_in
  CHARACTER(LEN=*) :: target
  CHARACTER(LEN=*),DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
  IF (keytype(pos) /= 3) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong data type for keyword ',target
    STOP 'getdbrc'
  ENDIF
!-
  IF (keymemlen(pos) /= size_of_in) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong array length for keyword ',target
    STOP 'getdbrc'
  ELSE
    tmp_ret_val(1:size_of_in) = &
 &    charmem(keymemstart(pos):keymemstart(pos)+keymemlen(pos)-1)
  ENDIF
!---------------------
END SUBROUTINE getdbrc
!-
!=== LOGICAL database INTERFACE
!-
SUBROUTINE getdbwl &
 &  (target,target_sig,status,fileorig,size_of_in,tmp_ret_val)
!---------------------------------------------------------------------
!- Write the LOGICAL data into the data base
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(LEN=*) :: target
  INTEGER :: target_sig, status, fileorig, size_of_in
  LOGICAL,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
!-
! First check if we have sufficiant space for the new key
!-
  IF (nb_keys+1 > keymemsize) THEN
    CALL getin_allockeys ()
  ENDIF
!-
! Fill out the items of the data base
!-
  nb_keys = nb_keys+1
  keysig(nb_keys) = target_sig
  keystr(nb_keys) = target(1:MIN(len_trim(target),30))
  keystatus(nb_keys) = status
  keytype(nb_keys) = 4
  keyfromfile(nb_keys) = fileorig
  keymemstart(nb_keys) = logicmempos+1
  keymemlen(nb_keys) = size_of_in
!-
! Before writing the actual size lets see if we have the space
!-
  IF (keymemstart(nb_keys)+keymemlen(nb_keys) > logicmemsize) THEN
    CALL getin_allocmem (4,keymemlen(nb_keys))
  ENDIF
!-
  logicmem(keymemstart(nb_keys): &
 &         keymemstart(nb_keys)+keymemlen(nb_keys)-1) = &
 &  tmp_ret_val(1:keymemlen(nb_keys))
  logicmempos = keymemstart(nb_keys)+keymemlen(nb_keys)-1
!---------------------
END SUBROUTINE getdbwl
!-
!===
!-
SUBROUTINE getdbrl(pos,size_of_in,target,tmp_ret_val)
!---------------------------------------------------------------------
!- Read the required variables in the database for LOGICALS
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: pos, size_of_in
  CHARACTER(LEN=*) :: target
  LOGICAL,DIMENSION(:) :: tmp_ret_val
!---------------------------------------------------------------------
  IF (keytype(pos) /= 4) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong data type for keyword ',target
    STOP 'getdbrl'
  ENDIF
!-
  IF (keymemlen(pos) /= size_of_in) THEN
    WRITE(*,*) 'FATAL ERROR : Wrong array length for keyword ',target
    STOP 'getdbrl'
  ELSE
    tmp_ret_val(1:size_of_in) = &
 &    logicmem(keymemstart(pos):keymemstart(pos)+keymemlen(pos)-1)
  ENDIF
!---------------------
END SUBROUTINE getdbrl
!-
!===
!-
SUBROUTINE getin_allockeys ()
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER,ALLOCATABLE :: tmp_int(:)
  CHARACTER(LEN=100),ALLOCATABLE :: tmp_str(:)
!-
  INTEGER :: ier
!---------------------------------------------------------------------
!-
! Either nothing exists in these arrays and it is easy to do
!-
  IF (keymemsize == 0) THEN
!-
    ALLOCATE(keysig(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keysig to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keystr(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keystr to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keystatus(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keystatus to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keytype(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keytype to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keycompress(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keycompress to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keyfromfile(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keyfromfile to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keymemstart(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keymemstart to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    ALLOCATE(keymemlen(memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keymemlen to size ', &
 &      memslabs
      STOP
    ENDIF
!-
    nb_keys = 0
    keymemsize = memslabs
    keycompress(:) = -1
!-
  ELSE
!-
!-- There is something already in the memory,
!-- we need to transfer and reallocate.
!-
    ALLOCATE(tmp_str(keymemsize),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate tmp_str to size ', &
 &      keymemsize
      STOP
    ENDIF
!-
    ALLOCATE(tmp_int(keymemsize),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate tmp_int to size ', &
 &      keymemsize
      STOP
    ENDIF
!-
    tmp_int(1:keymemsize) = keysig(1:keymemsize)
    DEALLOCATE(keysig)
    ALLOCATE(keysig(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keysig to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keysig(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_str(1:keymemsize) = keystr(1:keymemsize)
    DEALLOCATE(keystr)
    ALLOCATE(keystr(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keystr to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keystr(1:keymemsize) = tmp_str(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keystatus(1:keymemsize)
    DEALLOCATE(keystatus)
    ALLOCATE(keystatus(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keystatus to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keystatus(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keytype(1:keymemsize)
    DEALLOCATE(keytype)
    ALLOCATE(keytype(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keytype to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keytype(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keycompress(1:keymemsize)
    DEALLOCATE(keycompress)
    ALLOCATE(keycompress(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keycompress to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keycompress(:) = -1
    keycompress(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keyfromfile(1:keymemsize)
    DEALLOCATE(keyfromfile)
    ALLOCATE(keyfromfile(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keyfromfile to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keyfromfile(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keymemstart(1:keymemsize)
    DEALLOCATE(keymemstart)
    ALLOCATE(keymemstart(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keymemstart to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keymemstart(1:keymemsize) = tmp_int(1:keymemsize)
!-
    tmp_int(1:keymemsize) = keymemlen(1:keymemsize)
    DEALLOCATE(keymemlen)
    ALLOCATE(keymemlen(keymemsize+memslabs),stat=ier)
    IF (ier /= 0) THEN
      WRITE(*,*) &
 &      'getin_allockeys : Can not allocate keymemlen to size ', &
 &      keymemsize+memslabs
      STOP
    ENDIF
    keymemlen(1:keymemsize) = tmp_int(1:keymemsize)
!-
    keymemsize = keymemsize+memslabs
!-
    DEALLOCATE(tmp_int)
    DEALLOCATE(tmp_str)
  ENDIF
!-----------------------------
END SUBROUTINE getin_allockeys
!-
!===
!-
SUBROUTINE getin_allocmem (type,len_wanted)
!---------------------------------------------------------------------
!- Allocate the memory of the data base for all 4 types of memory
!-
!- 1 = INTEGER
!- 2 = REAL
!- 3 = CHAR
!- 4 = LOGICAL
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  INTEGER :: type, len_wanted
!-
  INTEGER,ALLOCATABLE :: tmp_int(:)
  CHARACTER(LEN=100),ALLOCATABLE :: tmp_char(:)
  REAL,ALLOCATABLE :: tmp_real(:)
  LOGICAL,ALLOCATABLE :: tmp_logic(:)
  INTEGER :: ier
!---------------------------------------------------------------------
  SELECT CASE (type)
  CASE(1)
    IF (intmemsize == 0) THEN
      ALLOCATE(intmem(memslabs),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate db-memory intmem to ', &
 &    memslabs
        STOP
      ENDIF
      intmemsize=memslabs
    ELSE
      ALLOCATE(tmp_int(intmemsize),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate tmp_int to ', &
 &    intmemsize
        STOP
      ENDIF
      tmp_int(1:intmemsize) = intmem(1:intmemsize)
      DEALLOCATE(intmem)
      ALLOCATE(intmem(intmemsize+MAX(memslabs,len_wanted)),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to re-allocate db-memory intmem to ', &
 &    intmemsize+MAX(memslabs,len_wanted)
        STOP
      ENDIF
      intmem(1:intmemsize) = tmp_int(1:intmemsize)
      intmemsize = intmemsize+MAX(memslabs,len_wanted)
      DEALLOCATE(tmp_int)
    ENDIF
  CASE(2)
    IF (realmemsize == 0) THEN
      ALLOCATE(realmem(memslabs),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate db-memory realmem to ', &
 &    memslabs
        STOP
      ENDIF
      realmemsize =  memslabs
    ELSE
      ALLOCATE(tmp_real(realmemsize),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate tmp_real to ', &
 &    realmemsize
        STOP
      ENDIF
      tmp_real(1:realmemsize) = realmem(1:realmemsize)
      DEALLOCATE(realmem)
      ALLOCATE(realmem(realmemsize+MAX(memslabs,len_wanted)),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to re-allocate db-memory realmem to ', &
 &    realmemsize+MAX(memslabs,len_wanted)
        STOP
      ENDIF
      realmem(1:realmemsize) = tmp_real(1:realmemsize)
      realmemsize = realmemsize+MAX(memslabs,len_wanted)
      DEALLOCATE(tmp_real)
    ENDIF
  CASE(3)
    IF (charmemsize == 0) THEN
      ALLOCATE(charmem(memslabs),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate db-memory charmem to ', &
 &    memslabs
        STOP
      ENDIF
      charmemsize = memslabs
    ELSE
      ALLOCATE(tmp_char(charmemsize),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate tmp_char to ', &
 &    charmemsize
        STOP
      ENDIF
      tmp_char(1:charmemsize) = charmem(1:charmemsize)
      DEALLOCATE(charmem)
      ALLOCATE(charmem(charmemsize+MAX(memslabs,len_wanted)),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to re-allocate db-memory charmem to ', &
 &    charmemsize+MAX(memslabs,len_wanted)
        STOP
      ENDIF
      charmem(1:charmemsize) = tmp_char(1:charmemsize)
      charmemsize = charmemsize+MAX(memslabs,len_wanted)
      DEALLOCATE(tmp_char)
    ENDIF
  CASE(4)
    IF (logicmemsize == 0) THEN
      ALLOCATE(logicmem(memslabs),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate db-memory logicmem to ', &
 &    memslabs
        STOP
      ENDIF
      logicmemsize = memslabs
    ELSE
      ALLOCATE(tmp_logic(logicmemsize),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to allocate tmp_logic to ', &
 &    logicmemsize
        STOP
      ENDIF
      tmp_logic(1:logicmemsize) = logicmem(1:logicmemsize)
      DEALLOCATE(logicmem)
      ALLOCATE(logicmem(logicmemsize+MAX(memslabs,len_wanted)),stat=ier)
      IF (ier /= 0) THEN
        WRITE(*,*) &
 &    'getin_allocmem : Unable to re-allocate db-memory logicmem to ', &
 &    logicmemsize+MAX(memslabs,len_wanted)
        STOP
      ENDIF
      logicmem(1:logicmemsize) = tmp_logic(1:logicmemsize)
      logicmemsize = logicmemsize+MAX(memslabs,len_wanted)
      DEALLOCATE(tmp_logic)
    ENDIF
  CASE DEFAULT
    WRITE(*,*) 'getin_allocmem : Unknown type : ',type
    STOP
  END SELECT
!----------------------------
END SUBROUTINE getin_allocmem
!-
!===
!-
SUBROUTINE getin_dump (fileprefix)
!---------------------------------------------------------------------
!- This subroutine will dump the content of the database into  file
!- which has the same format as the run.def. The idea is that the user
!- can see which parameters were used and re-use the file for another
!- run.
!-
!- The argument file allows the user to change the name of the file
!- in which the data will be archived
!---------------------------------------------------------------------
  IMPLICIT NONE
!-
  CHARACTER(*),OPTIONAL :: fileprefix
!-
  CHARACTER(LEN=80) :: usedfileprefix = "used"
  INTEGER :: ikey,if,iff,iv
  CHARACTER(LEN=3) :: tmp3
  CHARACTER(LEN=100) :: tmp_str, used_filename
  LOGICAL :: check = .FALSE.
!---------------------------------------------------------------------
  IF (PRESENT(fileprefix)) THEN
    usedfileprefix = fileprefix(1:MIN(len_trim(fileprefix),80))
  ENDIF
!-
  DO if=1,nbfiles
!---
    used_filename = TRIM(usedfileprefix)//'_'//TRIM(filelist(if))
    IF (check) THEN
      WRITE(*,*) &
 &      'GETIN_DUMP : opens file : ',TRIM(used_filename),' if = ',if
      WRITE(*,*) 'GETIN_DUMP : NUMBER OF KEYS : ',nb_keys
    ENDIF
    OPEN(unit=76,file=used_filename)
!-
!-- If this is the first file we need to add the list
!-- of file which belong to it
!-
    IF ( (if == 1) .AND. (nbfiles > 1) ) THEN
      WRITE(76,*) '# '
      WRITE(76,*) '# This file is linked to the following files :'
      WRITE(76,*) '# '
      DO iff=2,nbfiles
        WRITE(76,*) 'INCLUDEDEF = ',TRIM(filelist(iff))
      ENDDO
      WRITE(76,*) '# '
    ENDIF
!---
    DO ikey=1,nb_keys
!-
!---- Is this key form this file ?
!-
      IF (keyfromfile(ikey) == if) THEN
!-
!---- Write some comments
!-
        WRITE(76,*) '#'
        SELECT CASE (keystatus(ikey))
        CASE(1)
          WRITE(76,*) '# Values of ', &
 &          TRIM(keystr(ikey)),' comes from the run.def.'
        CASE(2)
          WRITE(76,*) '# Values of ', &
 &          TRIM(keystr(ikey)),' are all defaults.'
        CASE(3)
          WRITE(76,*) '# Values of ', &
 &          TRIM(keystr(ikey)),' are a mix of run.def and defaults.'
        CASE DEFAULT
          WRITE(76,*) '# Dont know from where the value of ', &
 &          TRIM(keystr(ikey)),' comes.'
        END SELECT
        WRITE(76,*) '#'
!-
!---- Write the values
!-
        SELECT CASE (keytype(ikey))
!-
        CASE(1)
          IF (keymemlen(ikey) == 1) THEN
            IF (keycompress(ikey) < 0) THEN
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),' = ',intmem(keymemstart(ikey))
            ELSE
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),' = ',keycompress(ikey), &
 &              ' * ',intmem(keymemstart(ikey))
            ENDIF
          ELSE
            DO iv=0,keymemlen(ikey)-1
              WRITE(tmp3,'(I3.3)') iv+1
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),'__',tmp3, &
 &              ' = ',intmem(keymemstart(ikey)+iv)
            ENDDO
          ENDIF
!-
        CASE(2)
          IF (keymemlen(ikey) == 1) THEN
            IF (keycompress(ikey) < 0) THEN
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),' = ',realmem(keymemstart(ikey))
            ELSE
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),' = ',keycompress(ikey),&
                   & ' * ',realmem(keymemstart(ikey))
            ENDIF
          ELSE
            DO iv=0,keymemlen(ikey)-1
              WRITE(tmp3,'(I3.3)') iv+1
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),'__',tmp3, &
 &              ' = ',realmem(keymemstart(ikey)+iv)
            ENDDO
          ENDIF
        CASE(3)
          IF (keymemlen(ikey) == 1) THEN
            tmp_str = charmem(keymemstart(ikey))
            WRITE(76,*) TRIM(keystr(ikey)),' = ',TRIM(tmp_str)
          ELSE
            DO iv=0,keymemlen(ikey)-1
              WRITE(tmp3,'(I3.3)') iv+1
              tmp_str = charmem(keymemstart(ikey)+iv)
              WRITE(76,*) &
 &              TRIM(keystr(ikey)),'__',tmp3,' = ',TRIM(tmp_str)
            ENDDO
          ENDIF
        CASE(4)
          IF (keymemlen(ikey) == 1) THEN
            IF (logicmem(keymemstart(ikey))) THEN
              WRITE(76,*) TRIM(keystr(ikey)),' = TRUE '
            ELSE
              WRITE(76,*) TRIM(keystr(ikey)),' = FALSE '
            ENDIF
          ELSE
            DO iv=0,keymemlen(ikey)-1
              WRITE(tmp3,'(I3.3)') iv+1
              IF (logicmem(keymemstart(ikey)+iv)) THEN
                WRITE(76,*) TRIM(keystr(ikey)),'__',tmp3,' = TRUE '
              ELSE
                WRITE(76,*) TRIM(keystr(ikey)),'__',tmp3,' = FALSE '
              ENDIF
            ENDDO
          ENDIF
!-
        CASE DEFAULT
          WRITE(*,*) &
 &          'FATAL ERROR : Unknown type for variable ', &
 &          TRIM(keystr(ikey))
          STOP 'getin_dump'
        END SELECT
      ENDIF
    ENDDO
!-
    CLOSE(unit=76)
!-
  ENDDO
!------------------------
END SUBROUTINE getin_dump
!-
!===
!-
END MODULE ioipsl_getincom