source: LMDZ4/branches/LMDZ4-dev-20091210/libf/dyn3d/fluxstokenc.F @ 1440

Last change on this file since 1440 was 1222, checked in by Ehouarn Millour, 15 years ago

Changes and cleanups to enable compiling without physics
and without ioipsl.

IOIPSL related cleanups:

  • bibio/writehist.F encapsulate the routine (which needs IOIPSL to function)

with #ifdef IOIPSL flag.

  • dyn3d/abort_gcm.F, dyn3dpar/abort_gcm.F and dyn3dpar/getparam.F90: use ioipsl_getincom module when not compiling with IOIPSL library, in order to always be able to use getin() routine.
  • removed unused "use IOIPSL" in dyn3dpar/guide_p_mod.F90
  • calendar related issue: Initialize day_ref and annee_ref in iniacademic.F (i.e. when they are not read from start.nc file)

Earth-specific programs/routines/modules:
create_etat0.F, fluxstokenc.F, limit_netcdf.F, startvar.F
(versions in dyn3d and dyn3dpar)
These routines and modules, which by design and porpose are made to function with
Earth physics are encapsulated with #CPP_EARTH cpp flag.

Earth-specific instructions:

  • calls to qminimum (specific treatment of first 2 tracers, i.e. water) in dyn3d/caladvtrac.F, dyn3d/integrd.F, dyn3dpar/caladvtrac_p.F, dyn3dpar/integrd_p.F only if (planet_type == 'earth')

Interaction with parallel physics:

  • routine dyn3dpar/parallel.F90 uses "surface_data" module (which is in the physics ...) to know value of "type_ocean" . Encapsulated that with #ifdef CPP_EARTH and set to a default type_ocean="dummy" otherwise.
  • So far, only Earth physics are parallelized, so all the interaction between parallel dynamics and parallel physics are encapsulated with #ifdef CCP_EARTH (this way we can run parallel without any physics). The (dyn3dpar) routines which contains such interaction are: bands.F90, gr_dyn_fi_p.F, gr_fi_dyn_p.F, mod_interface_dyn_phys.F90 This should later (when improving dyn/phys interface) be encapsulated with a more general and appropriate #ifdef CPP_PHYS cpp flag.

I checked that these changes do not alter results (on the simple
32x24x11 bench) on Ciclad (seq & mpi), Brodie (seq, mpi & omp) and
Vargas (seq, mpi & omp).

EM

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 4.2 KB
Line 
1!
2! $Id: fluxstokenc.F 1222 2009-08-07 11:48:33Z acozic $
3!
4      SUBROUTINE fluxstokenc(pbaru,pbarv,masse,teta,phi,phis,
5     . time_step,itau )
6#ifdef CPP_EARTH
7! This routine is designed to work for Earth and with ioipsl
8
9       USE IOIPSL
10c
11c     Auteur :  F. Hourdin
12c
13c
14ccc   ..   Modif. P. Le Van  ( 20/12/97 )  ...
15c
16      IMPLICIT NONE
17c
18#include "dimensions.h"
19#include "paramet.h"
20#include "comconst.h"
21#include "comvert.h"
22#include "comgeom.h"
23#include "tracstoke.h"
24#include "temps.h"
25#include "iniprint.h"
26
27      REAL time_step,t_wrt, t_ops
28      REAL pbaru(ip1jmp1,llm),pbarv(ip1jm,llm)
29      REAL masse(ip1jmp1,llm),teta(ip1jmp1,llm),phi(ip1jmp1,llm)
30      REAL phis(ip1jmp1)
31
32      REAL pbaruc(ip1jmp1,llm),pbarvc(ip1jm,llm)
33      REAL massem(ip1jmp1,llm),tetac(ip1jmp1,llm),phic(ip1jmp1,llm)
34
35      REAL pbarug(ip1jmp1,llm),pbarvg(iip1,jjm,llm),wg(ip1jmp1,llm)
36
37      REAL pbarvst(iip1,jjp1,llm),zistdyn
38        real dtcum
39
40      INTEGER iadvtr,ndex(1)
41      integer nscal
42      real tst(1),ist(1),istp(1)
43      INTEGER ij,l,irec,i,j,itau
44      INTEGER, SAVE :: fluxid, fluxvid,fluxdid
45 
46      SAVE iadvtr, massem,pbaruc,pbarvc,irec
47      SAVE phic,tetac
48      logical first
49      save first
50      data first/.true./
51      DATA iadvtr/0/
52
53
54c AC initialisations
55      pbarug(:,:)   = 0.
56      pbarvg(:,:,:) = 0.
57      wg(:,:)       = 0.
58     
59
60      if(first) then
61
62        CALL initfluxsto( 'fluxstoke',
63     .  time_step,istdyn* time_step,istdyn* time_step,
64     .  fluxid,fluxvid,fluxdid)
65       
66        ndex(1) = 0
67        call histwrite(fluxid, 'phis', 1, phis, iip1*jjp1, ndex)
68        call histwrite(fluxid, 'aire', 1, aire, iip1*jjp1, ndex)
69       
70        ndex(1) = 0
71        nscal = 1
72        tst(1) = time_step
73        call histwrite(fluxdid, 'dtvr', 1, tst, nscal, ndex)
74        ist(1)=istdyn
75        call histwrite(fluxdid, 'istdyn', 1, ist, nscal, ndex)
76        istp(1)= istphy
77        call histwrite(fluxdid, 'istphy', 1, istp, nscal, ndex)
78       
79        first = .false.
80
81      endif
82
83
84      IF(iadvtr.EQ.0) THEN
85         CALL initial0(ijp1llm,phic)
86         CALL initial0(ijp1llm,tetac)
87         CALL initial0(ijp1llm,pbaruc)
88         CALL initial0(ijmllm,pbarvc)
89      ENDIF
90
91c   accumulation des flux de masse horizontaux
92      DO l=1,llm
93         DO ij = 1,ip1jmp1
94            pbaruc(ij,l) = pbaruc(ij,l) + pbaru(ij,l)
95            tetac(ij,l) = tetac(ij,l) + teta(ij,l)
96            phic(ij,l) = phic(ij,l) + phi(ij,l)
97         ENDDO
98         DO ij = 1,ip1jm
99            pbarvc(ij,l) = pbarvc(ij,l) + pbarv(ij,l)
100         ENDDO
101      ENDDO
102
103c   selection de la masse instantannee des mailles avant le transport.
104      IF(iadvtr.EQ.0) THEN
105         CALL SCOPY(ip1jmp1*llm,masse,1,massem,1)
106      ENDIF
107
108      iadvtr   = iadvtr+1
109
110
111c   Test pour savoir si on advecte a ce pas de temps
112      IF ( iadvtr.EQ.istdyn ) THEN
113c    normalisation
114      DO l=1,llm
115         DO ij = 1,ip1jmp1
116            pbaruc(ij,l) = pbaruc(ij,l)/float(istdyn)
117            tetac(ij,l) = tetac(ij,l)/float(istdyn)
118            phic(ij,l) = phic(ij,l)/float(istdyn)
119         ENDDO
120         DO ij = 1,ip1jm
121            pbarvc(ij,l) = pbarvc(ij,l)/float(istdyn)
122         ENDDO
123      ENDDO
124
125c   traitement des flux de masse avant advection.
126c     1. calcul de w
127c     2. groupement des mailles pres du pole.
128
129        CALL groupe( massem, pbaruc,pbarvc, pbarug,pbarvg,wg )
130
131        do l=1,llm
132           do j=1,jjm
133              do i=1,iip1
134                 pbarvst(i,j,l)=pbarvg(i,j,l)
135              enddo
136           enddo
137           do i=1,iip1
138              pbarvst(i,jjp1,l)=0.
139           enddo
140        enddo
141
142         iadvtr=0
143        Print*,'ITAU auqel on stoke les fluxmasses',itau
144       
145        call histwrite(fluxid, 'masse', itau, massem,
146     .               iip1*jjp1*llm, ndex)
147       
148        call histwrite(fluxid, 'pbaru', itau, pbarug,
149     .               iip1*jjp1*llm, ndex)
150       
151        call histwrite(fluxvid, 'pbarv', itau, pbarvg,
152     .               iip1*jjm*llm, ndex)
153       
154        call histwrite(fluxid, 'w' ,itau, wg,
155     .             iip1*jjp1*llm, ndex)
156       
157        call histwrite(fluxid, 'teta' ,itau, tetac,
158     .             iip1*jjp1*llm, ndex)
159       
160        call histwrite(fluxid, 'phi' ,itau, phic,
161     .             iip1*jjp1*llm, ndex)
162       
163C
164
165      ENDIF ! if iadvtr.EQ.istdyn
166
167#else
168      write(lunout,*)
169     & 'fluxstokenc: Needs Earth physics (and ioipsl) to function'
170#endif
171! of #ifdef CPP_EARTH
172      RETURN
173      END
Note: See TracBrowser for help on using the repository browser.