source: LMDZ4/branches/IPSL-CM4_IPCC_patches/libf/phylmd/conf_phys.F90 @ 5331

!
! $Header$
!
!
!

  subroutine conf_phys(ocean, ok_veget, ok_journe, ok_mensuel, ok_instan, &
 &                     fact_cldcon, facttemps,ok_newmicro,iflag_cldcon, &
 &                     ratqsbas,ratqshaut,if_ebil, &
 &                     ok_ade, ok_aie, &
 &                     bl95_b0, bl95_b1)

   use IOIPSL
   implicit none

#include "conema3.h"
#include "fisrtilp.inc"
#include "nuage.h"
#include "YOMCST.inc"
!IM : on inclut/initialise les taux de CH4, N2O, CFC11 et CFC12
#include "clesphys.inc"
!
! Configuration de la "physique" de LMDZ a l'aide de la fonction
! GETIN de IOIPSL
!
! LF 05/2001
!

!
! ocean:      type d'ocean (force, slab, couple)
! ok_veget:   type de modele de vegetation
! ok_journe:  sorties journalieres
! ok_mensuel: sorties mensuelles
! ok_instan:  sorties instantanees
! ok_ade, ok_aie: apply or not aerosol direct and indirect effects
! bl95_b*: parameters in the formula to link CDNC to aerosol mass conc 
!


! Sortie:
  character (len = 6)  :: ocean
  logical              :: ok_veget, ok_newmicro
  logical              :: ok_journe, ok_mensuel, ok_instan        
  LOGICAL              :: ok_ade, ok_aie
  REAL                 :: bl95_b0, bl95_b1
  real                 :: fact_cldcon, facttemps,ratqsbas,ratqshaut
  integer              :: iflag_cldcon, if_ebil

! Local
  integer              :: numout = 6
  real                 :: zzz

!
!
!


!Config Key  = OCEAN 
!Config Desc = Type d'ocean
!Config Def  = force
!Config Help = Type d'ocean utilise: force, slab,couple
!
  ocean = 'force '
  call getin('OCEAN', ocean)
!
!Config Key  = VEGET 
!Config Desc = Type de modele de vegetation
!Config Def  = .false.
!Config Help = Type de modele de vegetation utilise
!
  ok_veget = .false.
  call getin('VEGET', ok_veget)
!
!Config Key  = OK_journe
!Config Desc = Pour des sorties journalieres 
!Config Def  = .false.
!Config Help = Pour creer le fichier histday contenant les sorties
!              journalieres 
!
  ok_journe = .false.
  call getin('OK_journe', ok_journe)
!
!Config Key  = OK_mensuel
!Config Desc = Pour des sorties mensuelles 
!Config Def  = .true.
!Config Help = Pour creer le fichier histmth contenant les sorties
!              mensuelles 
!
  ok_mensuel = .true.
  call getin('OK_mensuel', ok_mensuel)
!
!Config Key  = OK_instan
!Config Desc = Pour des sorties instantanees 
!Config Def  = .false.
!Config Help = Pour creer le fichier histins contenant les sorties
!              instantanees 
!
  ok_instan = .false.
  call getin('OK_instan', ok_instan)
!
!Config Key  = ok_ade
!Config Desc = Aerosol direct effect or not?
!Config Def  = .false.
!Config Help = Used in radlwsw.F
!
  ok_ade = .false.
  call getin('ok_ade', ok_ade)

!
!Config Key  = ok_aie
!Config Desc = Aerosol indirect effect or not?
!Config Def  = .false.
!Config Help = Used in nuage.F and radlwsw.F
!
  ok_aie = .false.
  call getin('ok_aie', ok_aie)

!
!Config Key  = bl95_b0
!Config Desc = Parameter in CDNC-maer link (Boucher&Lohmann 1995)
!Config Def  = .false.
!Config Help = Used in nuage.F
!
  bl95_b0 = 2.
  call getin('bl95_b0', bl95_b0)

!Config Key  = bl95_b1
!Config Desc = Parameter in CDNC-maer link (Boucher&Lohmann 1995)
!Config Def  = .false.
!Config Help = Used in nuage.F
!
  bl95_b1 = 0.2
  call getin('bl95_b1', bl95_b1)

!
!
!Config Key  = if_ebil
!Config Desc = Niveau de sortie pour les diags bilan d'energie 
!Config Def  = 0
!Config Help = 
!               
!
  if_ebil = 0
  call getin('if_ebil', if_ebil)
!!
!! Constante solaire & Parametres orbitaux & taux gaz effet de serre BEG
!!
!Config Key  = R_ecc
!Config Desc = Excentricite
!Config Def  = 0.016715
!Config Help = 
!               
!valeur AMIP II
  R_ecc = 0.016715
  call getin('R_ecc', R_ecc)
!!
!Config Key  = R_peri
!Config Desc = Equinoxe
!Config Def  = 
!Config Help = 
!               
!
!valeur AMIP II
  R_peri = 102.7
  call getin('R_peri', R_peri)
!!
!Config Key  = R_incl
!Config Desc = Inclinaison
!Config Def  = 
!Config Help = 
!               
!
!valeur AMIP II
  R_incl = 23.441
  call getin('R_incl', R_incl)
!!
!Config Key  = solaire
!Config Desc = Constante solaire en W/m2
!Config Def  = 1365.
!Config Help = 
!               
!
!valeur AMIP II
  solaire = 1365.
  call getin('solaire', solaire)
!!
!Config Key  = co2_ppm
!Config Desc = concentration du gaz carbonique en ppmv
!Config Def  = 348.
!Config Help = 
!               
!
!valeur AMIP II
  co2_ppm = 348.
  call getin('co2_ppm', co2_ppm)
!!
!Config Key  = RCO2
!Config Desc = Concentration du CO2
!Config Def  = co2_ppm * 1.0e-06  * 44.011/28.97
!Config Def  = 348. * 1.0e-06  * 44.011/28.97
!Config Help = 
!               
! RCO2 = 5.286789092164308E-04
!ancienne valeur
  RCO2 = co2_ppm * 1.0e-06  * 44.011/28.97 ! pour co2_ppm=348.

!!  call getin('RCO2', RCO2)
!!
!Config Key  = RCH4
!Config Desc = Concentration du CH4
!Config Def  = 1.65E-06* 16.043/28.97
!Config Help = 
!               
!
!valeur AMIP II
!OK  RCH4 = 1.65E-06* 16.043/28.97
! RCH4 = 9.137366240938903E-07
!
!ancienne valeur
! RCH4 = 1.72E-06* 16.043/28.97
!OK call getin('RCH4', RCH4)
  zzz = 1650.
  call getin('CH4_ppb', zzz)
  CH4_ppb = zzz
  RCH4 = CH4_ppb * 1.0E-09 * 16.043/28.97
!!
!Config Key  = RN2O
!Config Desc = Concentration du N2O
!Config Def  = 306.E-09* 44.013/28.97
!Config Help = 
!               
!
!valeur AMIP II
!OK  RN2O = 306.E-09* 44.013/28.97
! RN2O = 4.648939592682085E-07
!
!ancienne valeur
! RN2O = 310.E-09* 44.013/28.97
!OK  call getin('RN2O', RN2O)
  zzz=306.
  call getin('N2O_ppb', zzz)
  N2O_ppb = zzz
  RN2O = N2O_ppb * 1.0E-09 * 44.013/28.97
!!
!Config Key  = RCFC11
!Config Desc = Concentration du CFC11
!Config Def  = 280.E-12* 137.3686/28.97
!Config Help = 
!               
!
!OK RCFC11 = 280.E-12* 137.3686/28.97
  zzz = 280.
  call getin('CFC11_ppt',zzz)
  CFC11_ppt = zzz
  RCFC11=CFC11_ppt* 1.0E-12 * 137.3686/28.97
! RCFC11 = 1.327690990680013E-09
!OK call getin('RCFC11', RCFC11)
!!
!Config Key  = RCFC12
!Config Desc = Concentration du CFC12
!Config Def  = 484.E-12* 120.9140/28.97
!Config Help = 
!               
!
!OK RCFC12 = 484.E-12* 120.9140/28.97
  zzz = 484.
  call getin('CFC12_ppt',zzz)
  CFC12_ppt = zzz
  RCFC12 = CFC12_ppt * 1.0E-12 * 120.9140/28.97
! RCFC12 = 2.020102726958923E-09
!OK call getin('RCFC12', RCFC12)
!!
!! Constante solaire & Parametres orbitaux & taux gaz effet de serre END
!!
!! KE
!
!Config key  = cvl_corr
!Config Desc = Facteur multiplication des precip convectives dans KE
!Config Def  = 1.00
!Config Help = 1.02 pour un moderne ou un pre-ind. A ajuster pour un glaciaire
  cvl_corr = 1.00
  CALL getin('cvl_corr', cvl_corr)

!Config Key  = epmax
!Config Desc = Efficacite precip
!Config Def  = 0.993
!Config Help = 
!
  epmax = .993
  call getin('epmax', epmax)
!
!Config Key  = ok_adj_ema
!Config Desc =  
!Config Def  = false
!Config Help = 
!
  ok_adj_ema = .false.
  call getin('ok_adj_ema',ok_adj_ema)
!
!Config Key  = iflag_clw
!Config Desc =  
!Config Def  = 0
!Config Help = 
!
  iflag_clw = 0
  call getin('iflag_clw',iflag_clw)
!
!Config Key  = cld_lc_lsc 
!Config Desc =  
!Config Def  = 2.6e-4
!Config Help = 
!
  cld_lc_lsc = 2.6e-4
  call getin('cld_lc_lsc',cld_lc_lsc)
!
!Config Key  = cld_lc_con
!Config Desc =  
!Config Def  = 2.6e-4
!Config Help = 
!
  cld_lc_con = 2.6e-4
  call getin('cld_lc_con',cld_lc_con)
!
!Config Key  = cld_tau_lsc
!Config Desc =  
!Config Def  = 3600.
!Config Help = 
!
  cld_tau_lsc = 3600.
  call getin('cld_tau_lsc',cld_tau_lsc)
!
!Config Key  = cld_tau_con
!Config Desc =  
!Config Def  = 3600.
!Config Help = 
!
  cld_tau_con = 3600.
  call getin('cld_tau_con',cld_tau_con)
!
!Config Key  = ffallv_lsc
!Config Desc =  
!Config Def  = 1.
!Config Help = 
!
  ffallv_lsc = 1.
  call getin('ffallv_lsc',ffallv_lsc)
!
!Config Key  = ffallv_con
!Config Desc =  
!Config Def  = 1.
!Config Help = 
!
  ffallv_con = 1.
  call getin('ffallv_con',ffallv_con)
!
!Config Key  = coef_eva
!Config Desc =  
!Config Def  = 2.e-5
!Config Help = 
!
  coef_eva = 2.e-5
  call getin('coef_eva',coef_eva)
!
!Config Key  = reevap_ice
!Config Desc =  
!Config Def  = .false.
!Config Help = 
!
  reevap_ice = .false.
  call getin('reevap_ice',reevap_ice)
!
!Config Key  = iflag_cldcon 
!Config Desc =  
!Config Def  = 1
!Config Help = 
!
  iflag_cldcon = 1
  call getin('iflag_cldcon',iflag_cldcon)

!
!Config Key  = iflag_pdf 
!Config Desc =  
!Config Def  = 0
!Config Help = 
!
  iflag_pdf = 0
  call getin('iflag_pdf',iflag_pdf)
!
!Config Key  = fact_cldcon
!Config Desc =  
!Config Def  = 0.375
!Config Help = 
!
  fact_cldcon = 0.375
  call getin('fact_cldcon',fact_cldcon)

!
!Config Key  = facttemps
!Config Desc =  
!Config Def  = 1.e-4
!Config Help = 
!
  facttemps = 1.e-4
  call getin('facttemps',facttemps)

!
!Config Key  = ok_newmicro
!Config Desc =  
!Config Def  = .true.
!Config Help = 
!
  ok_newmicro = .true.
  call getin('ok_newmicro',ok_newmicro)
!
!Config Key  = ratqsbas
!Config Desc =  
!Config Def  = 0.01
!Config Help = 
!
  ratqsbas = 0.01
  call getin('ratqsbas',ratqsbas)
!
!Config Key  = ratqshaut
!Config Desc =  
!Config Def  = 0.3
!Config Help = 
!
  ratqshaut = 0.3
  call getin('ratqshaut',ratqshaut)

!
!Config Key  = rad_froid
!Config Desc =  
!Config Def  = 35.0
!Config Help = 
!
  rad_froid = 35.0
  call getin('rad_froid',rad_froid)

!
!Config Key  = rad_chau1
!Config Desc =  
!Config Def  = 13.0
!Config Help = 
!
  rad_chau1 = 13.0
  call getin('rad_chau1',rad_chau1)

!
!Config Key  = rad_chau2
!Config Desc =  
!Config Def  = 9.0
!Config Help = 
!
  rad_chau2 = 9.0
  call getin('rad_chau2',rad_chau2)

!
!Config Key  = top_height
!Config Desc =
!Config Def  = 3
!Config Help =
!
  top_height = 3
  call getin('top_height',top_height)

!
!Config Key  = overlap
!Config Desc =
!Config Def  = 3
!Config Help =
!
  overlap = 3
  call getin('overlap',overlap)


!
!
!Config Key  = cdmmax
!Config Desc =
!Config Def  = 1.3E-3
!Config Help =
!
  cdmmax = 1.3E-3
  call getin('cdmmax',cdmmax)

!
!Config Key  = cdhmax
!Config Desc =
!Config Def  = 1.1E-3
!Config Help =
!
  cdhmax = 1.1E-3
  call getin('cdhmax',cdhmax)

!261103
!
!Config Key  = ksta
!Config Desc =
!Config Def  = 1.0e-10
!Config Help =
!
  ksta = 1.0e-10
  call getin('ksta',ksta)

!
!Config Key  = ksta_ter
!Config Desc =
!Config Def  = 1.0e-10
!Config Help =
!
  ksta_ter = 1.0e-10
  call getin('ksta_ter',ksta_ter)

!
!Config Key  = ok_kzmin
!Config Desc =
!Config Def  = .true.
!Config Help =
!
  ok_kzmin = .true.
  call getin('ok_kzmin',ok_kzmin)

!Config Key = ok_lic_melt
!Config Desc = Prise en compte de la fonte de la calotte dans le bilan d'eau
!Config Def  = .false.
!Config Help = mettre a .false. pour assurer la conservation en eau
  ok_lic_melt = .false.
  call getin('ok_lic_melt', ok_lic_melt)

!
!Config Key  = lev_histhf
!Config Desc =
!Config Def  = 0
!Config Help =
!
  lev_histhf = 0
  call getin('lev_histhf',lev_histhf)

!
!Config Key  = lev_histday
!Config Desc =
!Config Def  = 1
!Config Help =
!
  lev_histday = 1
  call getin('lev_histday',lev_histday)

!
!Config Key  = lev_histmth
!Config Desc =
!Config Def  = 2
!Config Help =
!
  lev_histmth = 2
  call getin('lev_histmth',lev_histmth)

!
!
!Config Key  = 
!Config Desc =  
!Config Def  =
!Config Help = 
!
!   =
!  call getin('',)
!
!
!
!

  write(numout,*)' ##############################################'
  write(numout,*)' Configuration des parametres de la physique: '
  write(numout,*)' Config ocean = ', ocean
  write(numout,*)' Config veget = ', ok_veget
  write(numout,*)' Sortie journaliere = ', ok_journe
  write(numout,*)' Sortie mensuelle = ', ok_mensuel
  write(numout,*)' Sortie instantanee = ', ok_instan
  write(numout,*)' Sortie bilan d''energie, if_ebil =', if_ebil
  write(numout,*)' Excentricite = ',R_ecc
  write(numout,*)' Equinoxe = ',R_peri
  write(numout,*)' Inclinaison =',R_incl
  write(numout,*)' Constante solaire =',solaire
  write(numout,*)' co2_ppm =',co2_ppm
  write(numout,*)' RCO2 = ',RCO2
  write(numout,*)' CH4_ppb =',CH4_ppb,' RCH4 = ',RCH4
  write(numout,*)' N2O_ppb =',N2O_ppb,' RN2O =  ',RN2O
  write(numout,*)' CFC11_ppt=',CFC11_ppt,' RCFC11 =  ',RCFC11
  write(numout,*)' CFC12_ppt=',CFC12_ppt,' RCFC12 =  ',RCFC12
  write(numout,*)' cvl_corr=', cvl_corr
  write(numout,*)'ok_lic_melt=', ok_lic_melt
  write(numout,*)' epmax = ', epmax
  write(numout,*)' ok_adj_ema = ', ok_adj_ema
  write(numout,*)' iflag_clw = ', iflag_clw
  write(numout,*)' cld_lc_lsc = ', cld_lc_lsc
  write(numout,*)' cld_lc_con = ', cld_lc_con
  write(numout,*)' cld_tau_lsc = ', cld_tau_lsc
  write(numout,*)' cld_tau_con = ', cld_tau_con
  write(numout,*)' ffallv_lsc = ', ffallv_lsc
  write(numout,*)' ffallv_con = ', ffallv_con
  write(numout,*)' coef_eva = ', coef_eva
  write(numout,*)' reevap_ice = ', reevap_ice
  write(numout,*)' iflag_pdf = ', iflag_pdf
  write(numout,*)' iflag_cldcon = ', iflag_cldcon
  write(numout,*)' fact_cldcon = ', fact_cldcon
  write(numout,*)' facttemps = ', facttemps
  write(numout,*)' ok_newmicro = ',ok_newmicro 
  write(numout,*)' ratqsbas = ',ratqsbas 
  write(numout,*)' ratqshaut = ',ratqshaut 
  write(numout,*)' top_height = ',top_height 
  write(numout,*)' overlap = ',overlap 
  write(numout,*)' cdmmax = ',cdmmax 
  write(numout,*)' cdhmax = ',cdhmax 
  write(numout,*)' ksta = ',ksta 
  write(numout,*)' ksta_ter = ',ksta_ter 
  write(numout,*)' ok_kzmin = ',ok_kzmin 
  write(numout,*)' ok_ade = ',ok_ade
  write(numout,*)' ok_aie = ',ok_aie
  write(numout,*)' bl95_b0 = ',bl95_b0
  write(numout,*)' bl95_b1 = ',bl95_b1
  write(numout,*)' lev_histhf = ',lev_histhf 
  write(numout,*)' lev_histday = ',lev_histday 
  write(numout,*)' lev_histmth = ',lev_histmth 

  return

  end subroutine conf_phys

!
!#################################################################
!

   subroutine conf_interface(tau_calv)

   use IOIPSL
   implicit none

! Configuration de l'interace atm/surf
!
! tau_calv:    temps de relaxation pour la fonte des glaciers

  REAL          :: tau_calv

! Local
  integer              :: numout = 6
!
!Config Key  = tau_calv
!Config Desc = temps de relaxation pour fonte des glaciers en jours
!Config Def  = 1 an 
!Config Help = 
!
  tau_calv = 360.*10.
  call getin('tau_calv',tau_calv)

  write(numout,*)' ##############################################'
  WRITE(numout,*)' Configuration de l''interface atm/surfaces  : '
  WRITE(numout,*)' tau_calv = ',tau_calv
  return

  end subroutine conf_interface