Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Normal
Revision Log

startvar.F @ 3157

Last change on this file since 3157 was 588, checked in by (none), 20 years ago
This commit was manufactured by cvs2svn to create branch 'IPSL-CM4_IPCC_branch'.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 39.7 KB

Rev	Line
[524]	1	!
	2	! $Header$
	3	!
	4	C
	5	C
	6	MODULE startvar
	7	!
	8	!
	9	! There are three ways to access data from the database of atmospheric data which
	10	! can be used to initialize the model. This depends on the type of field which needs
	11	! to be extracted. In any case the call should come after a restget and should be of the type :
	12	! CALL startget(...)
	13	!
	14	! We will details the possible arguments to startget here :
	15	!
	16	! - A 2D variable on the dynamical grid :
	17	! CALL startget(varname, iml, jml, lon_in, lat_in, champ, val_ex, jml2, lon_in2, lat_in2, interbar )
	18	!
	19	! - A 1D variable on the physical grid :
	20	! CALL startget(varname, iml, jml, lon_in, lat_in, nbindex, champ, val_exp, jml2, lon_in2, lat_in2, interbar )
	21	!
	22	!
	23	! - A 3D variable on the dynamical grid :
	24	! CALL startget(varname, iml, jml, lon_in, lat_in, lml, pls, workvar, champ, val_exp, jml2, lon_in2, lat_in2, interbar )
	25	!
	26	!
	27	! There is special constraint on the atmospheric data base except that the
	28	! the data needs to be in netCDF and the variables should have the the following
	29	! names in the file :
	30	!
	31	! 'RELIEF' : High resolution orography
	32	! 'ST' : Surface temperature
	33	! 'CDSW' : Soil moisture
	34	! 'Z' : Surface geopotential
	35	! 'SP' : Surface pressure
	36	! 'U' : East ward wind
	37	! 'V' : Northward wind
	38	! 'TEMP' : Temperature
	39	! 'R' : Relative humidity
	40	!
	41	USE ioipsl
	42	!
	43	!
	44	IMPLICIT NONE
	45	!
	46	!
	47	PRIVATE
	48	PUBLIC startget
	49	!
	50	!
	51	INTERFACE startget
	52	MODULE PROCEDURE startget_phys2d, startget_phys1d, startget_dyn
	53	END INTERFACE
	54	!
	55	INTEGER, SAVE :: fid_phys, fid_dyn
	56	INTEGER, SAVE :: iml_phys, iml_rel, iml_dyn
	57	INTEGER, SAVE :: jml_phys, jml_rel, jml_dyn
	58	INTEGER, SAVE :: llm_dyn, ttm_dyn
	59	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:) :: lon_phys, lon_rug,
	60	. lon_alb, lon_rel, lon_dyn
	61	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:) :: lat_phys, lat_rug,
	62	. lat_alb, lat_rel, lat_dyn
	63	REAL, ALLOCATABLE, SAVE, DIMENSION (:) :: levdyn_ini
	64	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:) :: relief, zstd, zsig,
	65	. zgam, zthe, zpic, zval
	66	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:) :: rugo, masque, phis
	67	!
	68	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:) :: tsol, qsol, psol_dyn
	69	REAL, ALLOCATABLE, SAVE, DIMENSION (:,:,:) :: var_ana3d
	70	!
	71	CONTAINS
	72	!
	73	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	74	!
	75	SUBROUTINE startget_phys2d(varname, iml, jml, lon_in, lat_in,
	76	. champ, val_exp, jml2, lon_in2, lat_in2 , interbar, masque_lu )
	77	!
	78	! There is a big mess with the size in logitude, should it be iml or iml+1.
	79	! I have chosen to use the iml+1 as an argument to this routine and we declare
	80	! internaly smaler fields when needed. This needs to be cleared once and for all in LMDZ.
	81	! A convention is required.
	82	!
	83	!
	84	CHARACTER(), INTENT(in) :: varname
	85	INTEGER, INTENT(in) :: iml, jml ,jml2
	86	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	87	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	88	REAL, INTENT(inout) :: champ(iml,jml)
	89	REAL, INTENT(in) :: val_exp
	90	REAL, INTENT(in), optional :: masque_lu(iml,jml)
	91	LOGICAL interbar
	92	!
	93	! This routine only works if the variable does not exist or is constant
	94	!
	95	IF ( MINVAL(champ(:,:)).EQ.MAXVAL(champ(:,:)) .AND.
	96	.MINVAL(champ(:,:)).EQ.val_exp ) THEN
	97	!
	98	SELECTCASE(varname)
	99	!
	100	CASE ('relief')
	101	!
	102	! If we do not have the orography we need to get it
	103	!
	104	IF ( .NOT.ALLOCATED(relief)) THEN
	105	!
	106	if (present(masque_lu)) then
	107	CALL start_init_orog( iml, jml, lon_in, lat_in,
	108	. jml2,lon_in2,lat_in2, interbar, masque_lu )
	109	else
	110	CALL start_init_orog( iml, jml, lon_in, lat_in,
	111	. jml2,lon_in2,lat_in2, interbar)
	112	endif
	113	!
	114	ENDIF
	115	!
	116	IF (SIZE(relief) .NE. SIZE(champ)) THEN
	117	!
	118	WRITE(,) 'STARTVAR module has been',
	119	.' initialized to the wrong size'
	120	STOP
	121	!
	122	ENDIF
	123	!
	124	champ(:,:) = relief(:,:)
	125	!
	126	CASE ('rugosite')
	127	!
	128	! If we do not have the orography we need to get it
	129	!
	130	IF ( .NOT.ALLOCATED(rugo)) THEN
	131	!
	132	CALL start_init_orog( iml, jml, lon_in, lat_in,
	133	. jml2,lon_in2,lat_in2 , interbar )
	134	!
	135	ENDIF
	136	!
	137	IF (SIZE(rugo) .NE. SIZE(champ)) THEN
	138	!
	139	WRITE(,)
	140	. 'STARTVAR module has been initialized to the wrong size'
	141	STOP
	142	!
	143	ENDIF
	144	!
	145	champ(:,:) = rugo(:,:)
	146	!
	147	CASE ('masque')
	148	!
	149	! If we do not have the orography we need to get it
	150	!
	151	IF ( .NOT.ALLOCATED(masque)) THEN
	152	!
	153	CALL start_init_orog( iml, jml, lon_in, lat_in,
	154	. jml2,lon_in2,lat_in2 , interbar )
	155	!
	156	ENDIF
	157	!
	158	IF (SIZE(masque) .NE. SIZE(champ)) THEN
	159	!
	160	WRITE(,)
	161	. 'STARTVAR module has been initialized to the wrong size'
	162	STOP
	163	!
	164	ENDIF
	165	!
	166	champ(:,:) = masque(:,:)
	167	!
	168	CASE ('surfgeo')
	169	!
	170	! If we do not have the orography we need to get it
	171	!
	172	IF ( .NOT.ALLOCATED(phis)) THEN
	173	!
	174	CALL start_init_orog( iml, jml, lon_in, lat_in,
	175	. jml2,lon_in2, lat_in2 , interbar )
	176	!
	177	ENDIF
	178	!
	179	IF (SIZE(phis) .NE. SIZE(champ)) THEN
	180	!
	181	WRITE(,)
	182	. 'STARTVAR module has been initialized to the wrong size'
	183	STOP
	184	!
	185	ENDIF
	186	!
	187	champ(:,:) = phis(:,:)
	188	!
	189	CASE ('psol')
	190	!
	191	! If we do not have the orography we need to get it
	192	!
	193	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	194	!
	195	CALL start_init_dyn( iml, jml, lon_in, lat_in,
	196	. jml2,lon_in2, lat_in2 , interbar )
	197	!
	198	ENDIF
	199	!
	200	IF (SIZE(psol_dyn) .NE. SIZE(champ)) THEN
	201	!
	202	WRITE(,)
	203	. 'STARTVAR module has been initialized to the wrong size'
	204	STOP
	205	!
	206	ENDIF
	207	!
	208	champ(:,:) = psol_dyn(:,:)
	209	!
	210	CASE DEFAULT
	211	!
	212	WRITE(,) 'startget_phys2d'
	213	WRITE(,) 'No rule is present to extract variable',
	214	. varname(:LEN_TRIM(varname)),' from any data set'
	215	STOP
	216	!
	217	END SELECT
	218	!
	219	ELSE
	220	!
	221	! There are a few fields we might need if we need to interpolate 3D filed. Thus if they come through here we
	222	! will catch them
	223	!
	224	SELECTCASE(varname)
	225	!
	226	CASE ('surfgeo')
	227	!
	228	IF ( .NOT.ALLOCATED(phis)) THEN
	229	ALLOCATE(phis(iml,jml))
	230	ENDIF
	231	!
	232	IF (SIZE(phis) .NE. SIZE(champ)) THEN
	233	!
	234	WRITE(,)
	235	. 'STARTVAR module has been initialized to the wrong size'
	236	STOP
	237	!
	238	ENDIF
	239	!
	240	phis(:,:) = champ(:,:)
	241	!
	242	END SELECT
	243	!
	244	ENDIF
	245	!
	246	END SUBROUTINE startget_phys2d
	247	!
	248	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	249	!
	250	SUBROUTINE start_init_orog ( iml,jml,lon_in, lat_in,jml2,lon_in2 ,
	251	, lat_in2 , interbar, masque_lu )
	252	!
	253	INTEGER, INTENT(in) :: iml, jml, jml2
	254	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	255	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	256	REAL, intent(in), optional :: masque_lu(iml,jml)
	257	LOGICAL interbar
	258	!
	259	! LOCAL
	260	!
	261	LOGICAL interbar2
	262	REAL :: lev(1), date, dt,chmin,chmax
	263	INTEGER :: itau(1), fid
	264	INTEGER :: llm_tmp, ttm_tmp
	265	INTEGER :: i, j
	266	INTEGER :: iret
	267	CHARACTER*25 title
	268	REAL, ALLOCATABLE :: relief_hi(:,:)
	269	REAL, ALLOCATABLE :: lon_rad(:), lat_rad(:)
	270	REAL, ALLOCATABLE :: lon_ini(:), lat_ini(:)
	271	REAL, ALLOCATABLE :: tmp_var(:,:)
	272	INTEGER, ALLOCATABLE :: tmp_int(:,:)
	273	!
	274	CHARACTER*120 :: orogfname
	275	LOGICAL :: check=.TRUE.
	276	!
	277	!
	278	orogfname = 'Relief.nc'
	279	!
	280	IF ( check ) WRITE(,) 'Reading the high resolution orography'
	281	!
	282	CALL flininfo(orogfname,iml_rel, jml_rel, llm_tmp, ttm_tmp, fid)
	283	!
	284	ALLOCATE (lat_rel(iml_rel,jml_rel), stat=iret)
	285	ALLOCATE (lon_rel(iml_rel,jml_rel), stat=iret)
	286	ALLOCATE (relief_hi(iml_rel,jml_rel), stat=iret)
	287	!
	288	CALL flinopen(orogfname, .FALSE., iml_rel, jml_rel,
	289	.llm_tmp, lon_rel, lat_rel, lev, ttm_tmp,
	290	. itau, date, dt, fid)
	291	!
	292	CALL flinget(fid, 'RELIEF', iml_rel, jml_rel, llm_tmp,
	293	. ttm_tmp, 1, 1, relief_hi)
	294	!
	295	CALL flinclo(fid)
	296	!
	297	! In case we have a file which is in degrees we do the transformation
	298	!
	299	ALLOCATE(lon_rad(iml_rel))
	300	ALLOCATE(lon_ini(iml_rel))
	301
	302	IF ( MAXVAL(lon_rel(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	303	lon_ini(:) = lon_rel(:,1) * 2.0 * ASIN(1.0) / 180.0
	304	ELSE
	305	lon_ini(:) = lon_rel(:,1)
	306	ENDIF
	307
	308	ALLOCATE(lat_rad(jml_rel))
	309	ALLOCATE(lat_ini(jml_rel))
	310
	311	IF ( MAXVAL(lat_rel(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	312	lat_ini(:) = lat_rel(1,:) * 2.0 * ASIN(1.0) / 180.0
	313	ELSE
	314	lat_ini(:) = lat_rel(1,:)
	315	ENDIF
	316	!
	317	!
	318
	319	title='RELIEF'
	320
	321	interbar2 = .FALSE.
	322	CALL conf_dat2d(title,iml_rel, jml_rel, lon_ini, lat_ini,
	323	. lon_rad, lat_rad, relief_hi , interbar2 )
	324
	325	IF ( check ) WRITE(,) 'Computes all the parameters needed',
	326	.' for the gravity wave drag code'
	327	!
	328	! Allocate the data we need to put in the interpolated fields
	329	!
	330	! RELIEF: orographie moyenne
	331	ALLOCATE(relief(iml,jml))
	332	! zphi : orographie moyenne
	333	ALLOCATE(phis(iml,jml))
	334	! zstd: deviation standard de l'orographie sous-maille
	335	ALLOCATE(zstd(iml,jml))
	336	! zsig: pente de l'orographie sous-maille
	337	ALLOCATE(zsig(iml,jml))
	338	! zgam: anisotropy de l'orographie sous maille
	339	ALLOCATE(zgam(iml,jml))
	340	! zthe: orientation de l'axe oriente dans la direction
	341	! de plus grande pente de l'orographie sous maille
	342	ALLOCATE(zthe(iml,jml))
	343	! zpic: hauteur pics de la SSO
	344	ALLOCATE(zpic(iml,jml))
	345	! zval: hauteur vallees de la SSO
	346	ALLOCATE(zval(iml,jml))
	347	! masque : Masque terre ocean
	348	ALLOCATE(tmp_int(iml,jml))
	349	ALLOCATE(masque(iml,jml))
	350
	351	masque = -99999.
	352	if (present(masque_lu)) then
	353	masque = masque_lu
	354	endif
	355	!
	356	CALL grid_noro(iml_rel, jml_rel, lon_rad, lat_rad, relief_hi,
	357	. iml-1, jml, lon_in, lat_in,
	358	. phis, relief, zstd, zsig, zgam, zthe, zpic, zval, masque)
	359	phis = phis * 9.81
	360	!
	361	! masque(:,:) = FLOAT(tmp_int(:,:))
	362	!
	363	! Compute surface roughness
	364	!
	365	IF ( check ) WRITE(,)
	366	.'Compute surface roughness induced by the orography'
	367	!
	368	ALLOCATE(rugo(iml,jml))
	369	ALLOCATE(tmp_var(iml-1,jml))
	370	!
	371	CALL rugsoro(iml_rel, jml_rel, lon_rad, lat_rad, relief_hi,
	372	. iml-1, jml, lon_in, lat_in, tmp_var)
	373	!
	374	DO j = 1, jml
	375	DO i = 1, iml-1
	376	rugo(i,j) = tmp_var(i,j)
	377	ENDDO
	378	rugo(iml,j) = tmp_var(1,j)
	379	ENDDO
	380	c
	381	cc * rugo n'est pas utilise pour l'instant ****
	382	!
	383	! Build land-sea mask
	384	!
	385	!
	386	RETURN
	387	!
	388	END SUBROUTINE start_init_orog
	389	!
	390	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	391	!
	392	SUBROUTINE startget_phys1d(varname, iml, jml, lon_in,
	393	.lat_in, nbindex, champ, val_exp ,jml2, lon_in2, lat_in2,interbar)
	394	!
	395	CHARACTER(), INTENT(in) :: varname
	396	INTEGER, INTENT(in) :: iml, jml, nbindex, jml2
	397	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	398	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	399	REAL, INTENT(inout) :: champ(nbindex)
	400	REAL, INTENT(in) :: val_exp
	401	LOGICAL interbar
	402	!
	403	!
	404	! This routine only works if the variable does not exist or is constant
	405	!
	406	IF ( MINVAL(champ(:)).EQ.MAXVAL(champ(:)) .AND.
	407	.MINVAL(champ(:)).EQ.val_exp ) THEN
	408	SELECTCASE(varname)
	409	CASE ('tsol')
	410	IF ( .NOT.ALLOCATED(tsol)) THEN
	411	CALL start_init_phys( iml, jml, lon_in, lat_in,
	412	. jml2, lon_in2, lat_in2, interbar )
	413	ENDIF
	414	IF ( SIZE(tsol) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	415	WRITE(,)
	416	. 'STARTVAR module has been initialized to the wrong size'
	417	STOP
	418	ENDIF
	419	CALL gr_dyn_fi(1, iml, jml, nbindex, tsol, champ)
	420	CASE ('qsol')
	421	IF ( .NOT.ALLOCATED(qsol)) THEN
	422	CALL start_init_phys( iml, jml, lon_in, lat_in,
	423	. jml2, lon_in2,lat_in2 , interbar )
	424	ENDIF
	425	IF ( SIZE(qsol) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	426	WRITE(,)
	427	. 'STARTVAR module has been initialized to the wrong size'
	428	STOP
	429	ENDIF
	430	CALL gr_dyn_fi(1, iml, jml, nbindex, qsol, champ)
	431	CASE ('psol')
	432	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	433	CALL start_init_dyn( iml, jml, lon_in, lat_in,
	434	. jml2, lon_in2,lat_in2 , interbar )
	435	ENDIF
	436	IF (SIZE(psol_dyn) .NE. SIZE(lon_in)*SIZE(lat_in)) THEN
	437	WRITE(,)
	438	. 'STARTVAR module has been initialized to the wrong size'
	439	STOP
	440	ENDIF
	441	CALL gr_dyn_fi(1, iml, jml, nbindex, psol_dyn, champ)
	442	CASE ('zmea')
	443	IF ( .NOT.ALLOCATED(relief)) THEN
	444	CALL start_init_orog( iml, jml, lon_in, lat_in,
	445	. jml2, lon_in2,lat_in2 , interbar )
	446	ENDIF
	447	IF ( SIZE(relief) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	448	WRITE(,)
	449	. 'STARTVAR module has been initialized to the wrong size'
	450	STOP
	451	ENDIF
	452	CALL gr_dyn_fi(1, iml, jml, nbindex, relief, champ)
	453	CASE ('zstd')
	454	IF ( .NOT.ALLOCATED(zstd)) THEN
	455	CALL start_init_orog( iml, jml, lon_in, lat_in,
	456	. jml2, lon_in2,lat_in2 , interbar )
	457	ENDIF
	458	IF ( SIZE(zstd) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	459	WRITE(,)
	460	. 'STARTVAR module has been initialized to the wrong size'
	461	STOP
	462	ENDIF
	463	CALL gr_dyn_fi(1, iml, jml, nbindex,zstd, champ)
	464	CASE ('zsig')
	465	IF ( .NOT.ALLOCATED(zsig)) THEN
	466	CALL start_init_orog( iml, jml, lon_in, lat_in,
	467	. jml2, lon_in2,lat_in2 , interbar )
	468	ENDIF
	469	IF ( SIZE(zsig) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	470	WRITE(,)
	471	. 'STARTVAR module has been initialized to the wrong size'
	472	STOP
	473	ENDIF
	474	CALL gr_dyn_fi(1, iml, jml, nbindex,zsig, champ)
	475	CASE ('zgam')
	476	IF ( .NOT.ALLOCATED(zgam)) THEN
	477	CALL start_init_orog( iml, jml, lon_in, lat_in,
	478	. jml2, lon_in2,lat_in2 , interbar )
	479	ENDIF
	480	IF ( SIZE(zgam) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	481	WRITE(,)
	482	. 'STARTVAR module has been initialized to the wrong size'
	483	STOP
	484	ENDIF
	485	CALL gr_dyn_fi(1, iml, jml, nbindex,zgam, champ)
	486	CASE ('zthe')
	487	IF ( .NOT.ALLOCATED(zthe)) THEN
	488	CALL start_init_orog( iml, jml, lon_in, lat_in,
	489	. jml2, lon_in2,lat_in2 , interbar )
	490	ENDIF
	491	IF ( SIZE(zthe) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	492	WRITE(,)
	493	. 'STARTVAR module has been initialized to the wrong size'
	494	STOP
	495	ENDIF
	496	CALL gr_dyn_fi(1, iml, jml, nbindex,zthe, champ)
	497	CASE ('zpic')
	498	IF ( .NOT.ALLOCATED(zpic)) THEN
	499	CALL start_init_orog( iml, jml, lon_in, lat_in,
	500	. jml2, lon_in2,lat_in2 , interbar )
	501	ENDIF
	502	IF ( SIZE(zpic) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	503	WRITE(,)
	504	. 'STARTVAR module has been initialized to the wrong size'
	505	STOP
	506	ENDIF
	507	CALL gr_dyn_fi(1, iml, jml, nbindex,zpic, champ)
	508	CASE ('zval')
	509	IF ( .NOT.ALLOCATED(zval)) THEN
	510	CALL start_init_orog( iml, jml, lon_in, lat_in,
	511	. jml2, lon_in2,lat_in2 , interbar )
	512	ENDIF
	513	IF ( SIZE(zval) .NE. SIZE(lon_in)*SIZE(lat_in) ) THEN
	514	WRITE(,)
	515	. 'STARTVAR module has been initialized to the wrong size'
	516	STOP
	517	ENDIF
	518	CALL gr_dyn_fi(1, iml, jml, nbindex,zval, champ)
	519	CASE ('rads')
	520	champ(:) = 0.0
	521	CASE ('snow')
	522	champ(:) = 0.0
	523	CASE ('deltat')
	524	champ(:) = 0.0
	525	CASE ('rugmer')
	526	champ(:) = 0.001
	527	CASE ('agsno')
	528	champ(:) = 50.0
	529	CASE DEFAULT
	530	WRITE(,) 'startget_phys1d'
	531	WRITE(,) 'No rule is present to extract variable ',
	532	. varname(:LEN_TRIM(varname)),' from any data set'
	533	STOP
	534	END SELECT
	535	ELSE
	536	!
	537	! If we see tsol we catch it as we may need it for a 3D interpolation
	538	!
	539	SELECTCASE(varname)
	540	CASE ('tsol')
	541	IF ( .NOT.ALLOCATED(tsol)) THEN
	542	ALLOCATE(tsol(SIZE(lon_in),SIZE(lat_in) ))
	543	ENDIF
	544	CALL gr_fi_dyn(1, iml, jml, nbindex, champ, tsol)
	545	END SELECT
	546	ENDIF
	547	END SUBROUTINE startget_phys1d
	548	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	549	!
	550	SUBROUTINE start_init_phys( iml, jml, lon_in, lat_in, jml2,
	551	. lon_in2, lat_in2 , interbar )
	552	!
	553	INTEGER, INTENT(in) :: iml, jml ,jml2
	554	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	555	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	556	LOGICAL interbar
	557	!
	558	! LOCAL
	559	!
[533]	560	!ac REAL :: lev(1), date, dt
	561	REAL :: date, dt
	562	REAL, DIMENSION(:), ALLOCATABLE :: levphys_ini
	563	!ac
[524]	564	INTEGER :: itau(1)
	565	INTEGER :: llm_tmp, ttm_tmp
	566	INTEGER :: i, j
	567	!
	568	CHARACTER*25 title
	569	CHARACTER*120 :: physfname
	570	LOGICAL :: check=.TRUE.
	571	!
	572	REAL, ALLOCATABLE :: lon_rad(:), lat_rad(:)
	573	REAL, ALLOCATABLE :: lon_ini(:), lat_ini(:)
	574	REAL, ALLOCATABLE :: var_ana(:,:), tmp_var(:,:)
	575	!
	576	physfname = 'ECPHY.nc'
	577	!
	578	IF ( check ) WRITE(,) 'Opening the surface analysis'
	579	!
	580	CALL flininfo(physfname, iml_phys, jml_phys, llm_tmp,
	581	. ttm_tmp, fid_phys)
	582	!
	583	ALLOCATE (lat_phys(iml_phys,jml_phys))
	584	ALLOCATE (lon_phys(iml_phys,jml_phys))
[533]	585	!ac
	586	ALLOCATE (levphys_ini(llm_tmp))
[524]	587	!
[533]	588	! CALL flinopen(physfname, .FALSE., iml_phys, jml_phys,
	589	! . llm_tmp, lon_phys, lat_phys, lev, ttm_tmp,
	590	! . itau, date, dt, fid_phys)
	591	!
[524]	592	CALL flinopen(physfname, .FALSE., iml_phys, jml_phys,
[533]	593	. llm_tmp, lon_phys, lat_phys, levphys_ini, ttm_tmp,
[524]	594	. itau, date, dt, fid_phys)
	595	!
[533]	596	DEALLOCATE (levphys_ini)
	597	!ac
	598	!
[524]	599	! Allocate the space we will need to get the data out of this file
	600	!
	601	ALLOCATE(var_ana(iml_phys, jml_phys))
	602	!
	603	! In case we have a file which is in degrees we do the transformation
	604	!
	605	ALLOCATE(lon_rad(iml_phys))
	606	ALLOCATE(lon_ini(iml_phys))
	607
	608	IF ( MAXVAL(lon_phys(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	609	lon_ini(:) = lon_phys(:,1) * 2.0 * ASIN(1.0) / 180.0
	610	ELSE
	611	lon_ini(:) = lon_phys(:,1)
	612	ENDIF
	613
	614	ALLOCATE(lat_rad(jml_phys))
	615	ALLOCATE(lat_ini(jml_phys))
	616
	617	IF ( MAXVAL(lat_phys(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	618	lat_ini(:) = lat_phys(1,:) * 2.0 * ASIN(1.0) / 180.0
	619	ELSE
	620	lat_ini(:) = lat_phys(1,:)
	621	ENDIF
	622
	623
	624	!
	625	! We get the two standard varibales
	626	! Surface temperature
	627	!
	628	ALLOCATE(tsol(iml,jml))
	629	ALLOCATE(tmp_var(iml-1,jml))
	630	!
	631	!
	632
	633	CALL flinget(fid_phys, 'ST', iml_phys, jml_phys,
	634	.llm_tmp, ttm_tmp, 1, 1, var_ana)
	635
	636	title='ST'
	637	CALL conf_dat2d(title,iml_phys, jml_phys, lon_ini, lat_ini,
	638	. lon_rad, lat_rad, var_ana , interbar )
	639
	640	IF ( interbar ) THEN
	641	WRITE(6,*) '-------------------------------------------------',
	642	,'--------------'
	643	WRITE(6,*) '$$$ Utilisation de l interpolation barycentrique ',
	644	, ' pour ST $$$ '
	645	WRITE(6,*) '-------------------------------------------------',
	646	,'--------------'
	647	CALL inter_barxy ( iml_phys,jml_phys -1,lon_rad,lat_rad ,
	648	, var_ana, iml-1, jml-1, lon_in2, lat_in2, jml, tmp_var )
	649	ELSE
	650	CALL grille_m(iml_phys, jml_phys, lon_rad, lat_rad,
	651	. var_ana, iml-1, jml, lon_in, lat_in, tmp_var )
	652	ENDIF
	653
	654	CALL gr_int_dyn(tmp_var, tsol, iml-1, jml)
	655	!
	656	! Soil moisture
	657	!
	658	ALLOCATE(qsol(iml,jml))
	659	CALL flinget(fid_phys, 'CDSW', iml_phys, jml_phys,
	660	. llm_tmp, ttm_tmp, 1, 1, var_ana)
	661
	662	title='CDSW'
	663	CALL conf_dat2d(title,iml_phys, jml_phys, lon_ini, lat_ini,
	664	. lon_rad, lat_rad, var_ana, interbar )
	665
	666	IF ( interbar ) THEN
	667	WRITE(6,*) '-------------------------------------------------',
	668	,'--------------'
	669	WRITE(6,*) '$$$ Utilisation de l interpolation barycentrique ',
	670	, ' pour CDSW $$$ '
	671	WRITE(6,*) '-------------------------------------------------',
	672	,'--------------'
	673	CALL inter_barxy ( iml_phys,jml_phys -1,lon_rad,lat_rad ,
	674	, var_ana, iml-1, jml-1, lon_in2, lat_in2, jml, tmp_var )
	675	ELSE
	676	CALL grille_m(iml_phys, jml_phys, lon_rad, lat_rad,
	677	. var_ana, iml-1, jml, lon_in, lat_in, tmp_var )
	678	ENDIF
	679	c
	680	CALL gr_int_dyn(tmp_var, qsol, iml-1, jml)
	681	!
	682	CALL flinclo(fid_phys)
	683	!
	684	END SUBROUTINE start_init_phys
	685	!
	686	!
	687	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	688	!
	689	!
	690	SUBROUTINE startget_dyn(varname, iml, jml, lon_in, lat_in,
	691	. lml, pls, workvar, champ, val_exp,jml2, lon_in2, lat_in2 ,
	692	, interbar )
	693	!
	694	! ARGUMENTS
	695	!
	696	CHARACTER(), INTENT(in) :: varname
	697	INTEGER, INTENT(in) :: iml, jml, lml, jml2
	698	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	699	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	700	REAL, INTENT(in) :: pls(iml, jml, lml)
	701	REAL, INTENT(in) :: workvar(iml, jml, lml)
	702	REAL, INTENT(inout) :: champ(iml, jml, lml)
	703	REAL, INTENT(in) :: val_exp
	704	LOGICAL interbar
	705	!
	706	! LOCAL
	707	!
	708	INTEGER :: il, ij, ii
	709	REAL :: xppn, xpps
	710	!
	711	#include "dimensions.h"
	712	#include "paramet.h"
	713	#include "comgeom2.h"
	714	#include "comconst.h"
	715	!
	716	! This routine only works if the variable does not exist or is constant
	717	!
	718	IF ( MINVAL(champ(:,:,:)).EQ.MAXVAL(champ(:,:,:)) .AND.
	719	. MINVAL(champ(:,:,:)).EQ.val_exp ) THEN
	720	!
	721	SELECTCASE(varname)
	722	CASE ('u')
	723	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	724	CALL start_init_dyn( iml, jml, lon_in, lat_in, jml2 ,
	725	. lon_in2,lat_in2 , interbar )
	726	ENDIF
	727	CALL start_inter_3d('U', iml, jml, lml, lon_in,
	728	. lat_in, jml2, lon_in2, lat_in2, pls, champ,interbar )
	729	DO il=1,lml
	730	DO ij=1,jml
	731	DO ii=1,iml-1
	732	champ(ii,ij,il) = champ(ii,ij,il) * cu(ii,ij)
	733	ENDDO
	734	champ(iml,ij, il) = champ(1,ij, il)
	735	ENDDO
	736	ENDDO
	737	CASE ('v')
	738	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	739	CALL start_init_dyn( iml, jml, lon_in, lat_in , jml2,
	740	. lon_in2, lat_in2 , interbar )
	741	ENDIF
	742	CALL start_inter_3d('V', iml, jml, lml, lon_in,
	743	. lat_in, jml2, lon_in2, lat_in2, pls, champ, interbar )
	744	DO il=1,lml
	745	DO ij=1,jml
	746	DO ii=1,iml-1
	747	champ(ii,ij,il) = champ(ii,ij,il) * cv(ii,ij)
	748	ENDDO
	749	champ(iml,ij, il) = champ(1,ij, il)
	750	ENDDO
	751	ENDDO
	752	CASE ('t')
	753	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	754	CALL start_init_dyn( iml, jml, lon_in, lat_in, jml2 ,
	755	. lon_in2, lat_in2 ,interbar )
	756	ENDIF
	757	CALL start_inter_3d('TEMP', iml, jml, lml, lon_in,
	758	. lat_in, jml2, lon_in2, lat_in2, pls, champ, interbar )
	759
	760	CASE ('tpot')
	761	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	762	CALL start_init_dyn( iml, jml, lon_in, lat_in , jml2 ,
	763	. lon_in2, lat_in2 , interbar )
	764	ENDIF
	765	CALL start_inter_3d('TEMP', iml, jml, lml, lon_in,
	766	. lat_in, jml2, lon_in2, lat_in2, pls, champ, interbar )
	767	IF ( MINVAL(workvar(:,:,:)) .NE. MAXVAL(workvar(:,:,:)) )
	768	. THEN
	769	DO il=1,lml
	770	DO ij=1,jml
	771	DO ii=1,iml-1
	772	champ(ii,ij,il) = champ(ii,ij,il) * cpp
	773	. / workvar(ii,ij,il)
	774	ENDDO
	775	champ(iml,ij,il) = champ(1,ij,il)
	776	ENDDO
	777	ENDDO
	778	DO il=1,lml
	779	xppn = SUM(aire(:,1)*champ(:,1,il))/apoln
	780	xpps = SUM(aire(:,jml)*champ(:,jml,il))/apols
	781	champ(:,1,il) = xppn
	782	champ(:,jml,il) = xpps
	783	ENDDO
	784	ELSE
	785	WRITE(,)'Could not compute potential temperature as the'
	786	WRITE(,)'Exner function is missing or constant.'
	787	STOP
	788	ENDIF
	789	CASE ('q')
	790	IF ( .NOT.ALLOCATED(psol_dyn)) THEN
	791	CALL start_init_dyn( iml, jml, lon_in, lat_in, jml2 ,
	792	. lon_in2, lat_in2 , interbar )
	793	ENDIF
	794	CALL start_inter_3d('R', iml, jml, lml, lon_in, lat_in,
	795	. jml2, lon_in2, lat_in2, pls, champ, interbar )
	796	IF ( MINVAL(workvar(:,:,:)) .NE. MAXVAL(workvar(:,:,:)) )
	797	. THEN
	798	DO il=1,lml
	799	DO ij=1,jml
	800	DO ii=1,iml-1
	801	champ(ii,ij,il) = 0.01 * champ(ii,ij,il) *
	802	. workvar(ii,ij,il)
	803	ENDDO
	804	champ(iml,ij,il) = champ(1,ij,il)
	805	ENDDO
	806	ENDDO
	807	WHERE ( champ .LT. 0.) champ = 1.0E-10
	808	DO il=1,lml
	809	xppn = SUM(aire(:,1)*champ(:,1,il))/apoln
	810	xpps = SUM(aire(:,jml)*champ(:,jml,il))/apols
	811	champ(:,1,il) = xppn
	812	champ(:,jml,il) = xpps
	813	ENDDO
	814	ELSE
	815	WRITE(,)'Could not compute specific humidity as the'
	816	WRITE(,)'saturated humidity is missing or constant.'
	817	STOP
	818	ENDIF
	819	CASE DEFAULT
	820	WRITE(,) 'startget_dyn'
	821	WRITE(,) 'No rule is present to extract variable ',
	822	. varname(:LEN_TRIM(varname)),' from any data set'
	823	STOP
	824	END SELECT
	825	ENDIF
	826	END SUBROUTINE startget_dyn
	827	!
	828	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	829	!
	830	SUBROUTINE start_init_dyn( iml, jml, lon_in, lat_in,jml2,lon_in2 ,
	831	, lat_in2 , interbar )
	832	!
	833	INTEGER, INTENT(in) :: iml, jml, jml2
	834	REAL, INTENT(in) :: lon_in(iml), lat_in(jml)
	835	REAL, INTENT(in) :: lon_in2(iml), lat_in2(jml2)
	836	LOGICAL interbar
	837	!
	838	! LOCAL
	839	!
	840	REAL :: lev(1), date, dt
	841	INTEGER :: itau(1)
	842	INTEGER :: i, j
	843	integer :: iret
	844	!
	845	CHARACTER*120 :: physfname
	846	LOGICAL :: check=.TRUE.
	847	!
	848	REAL, ALLOCATABLE :: lon_rad(:), lat_rad(:)
	849	REAL, ALLOCATABLE :: lon_ini(:), lat_ini(:)
	850	REAL, ALLOCATABLE :: var_ana(:,:), tmp_var(:,:), z(:,:)
	851	REAL, ALLOCATABLE :: xppn(:), xpps(:)
	852	LOGICAL :: allo
	853	!
	854	!
	855	#include "dimensions.h"
	856	#include "paramet.h"
	857	#include "comgeom2.h"
	858
	859	CHARACTER*25 title
	860
	861	!
	862	physfname = 'ECDYN.nc'
	863	!
	864	IF ( check ) WRITE(,) 'Opening the surface analysis'
	865	!
	866	CALL flininfo(physfname, iml_dyn, jml_dyn, llm_dyn,
	867	. ttm_dyn, fid_dyn)
	868	IF ( check ) WRITE(,) 'Values read: ', iml_dyn, jml_dyn,
	869	. llm_dyn, ttm_dyn
	870	!
	871	ALLOCATE (lat_dyn(iml_dyn,jml_dyn), stat=iret)
	872	ALLOCATE (lon_dyn(iml_dyn,jml_dyn), stat=iret)
	873	ALLOCATE (levdyn_ini(llm_dyn), stat=iret)
	874	!
	875	CALL flinopen(physfname, .FALSE., iml_dyn, jml_dyn, llm_dyn,
	876	. lon_dyn, lat_dyn, levdyn_ini, ttm_dyn,
	877	. itau, date, dt, fid_dyn)
	878	!
	879
	880	allo = allocated (var_ana)
	881	if (allo) then
	882	DEALLOCATE(var_ana, stat=iret)
	883	endif
	884	ALLOCATE(var_ana(iml_dyn, jml_dyn), stat=iret)
	885
	886	allo = allocated (lon_rad)
	887	if (allo) then
	888	DEALLOCATE(lon_rad, stat=iret)
	889	endif
	890
	891	ALLOCATE(lon_rad(iml_dyn), stat=iret)
	892	ALLOCATE(lon_ini(iml_dyn))
	893
	894	IF ( MAXVAL(lon_dyn(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	895	lon_ini(:) = lon_dyn(:,1) * 2.0 * ASIN(1.0) / 180.0
	896	ELSE
	897	lon_ini(:) = lon_dyn(:,1)
	898	ENDIF
	899
	900	ALLOCATE(lat_rad(jml_dyn))
	901	ALLOCATE(lat_ini(jml_dyn))
	902
	903	IF ( MAXVAL(lat_dyn(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	904	lat_ini(:) = lat_dyn(1,:) * 2.0 * ASIN(1.0) / 180.0
	905	ELSE
	906	lat_ini(:) = lat_dyn(1,:)
	907	ENDIF
	908	!
	909
	910
	911	ALLOCATE(z(iml, jml))
	912	ALLOCATE(tmp_var(iml-1,jml))
	913	!
	914	CALL flinget(fid_dyn, 'Z', iml_dyn, jml_dyn, 0, ttm_dyn,
	915	. 1, 1, var_ana)
	916	c
	917	title='Z'
	918	CALL conf_dat2d( title,iml_dyn, jml_dyn,lon_ini, lat_ini,
	919	. lon_rad, lat_rad, var_ana, interbar )
	920	c
	921	IF ( interbar ) THEN
	922	WRITE(6,*) '-------------------------------------------------',
	923	,'--------------'
	924	WRITE(6,*) '$$$ Utilisation de l interpolation barycentrique ',
	925	, ' pour Z $$$ '
	926	WRITE(6,*) '-------------------------------------------------',
	927	,'--------------'
	928	CALL inter_barxy ( iml_dyn,jml_dyn -1,lon_rad,lat_rad ,
	929	, var_ana, iml-1, jml-1, lon_in2, lat_in2, jml, tmp_var)
	930	ELSE
	931	CALL grille_m(iml_dyn, jml_dyn , lon_rad, lat_rad, var_ana,
	932	. iml-1, jml, lon_in, lat_in, tmp_var)
	933	ENDIF
	934
	935	CALL gr_int_dyn(tmp_var, z, iml-1, jml)
	936	!
	937	ALLOCATE(psol_dyn(iml, jml))
	938	!
	939	CALL flinget(fid_dyn, 'SP', iml_dyn, jml_dyn, 0, ttm_dyn,
	940	. 1, 1, var_ana)
	941
	942	title='SP'
	943	CALL conf_dat2d( title,iml_dyn, jml_dyn,lon_ini, lat_ini,
	944	. lon_rad, lat_rad, var_ana, interbar )
	945
	946	IF ( interbar ) THEN
	947	WRITE(6,*) '-------------------------------------------------',
	948	,'--------------'
	949	WRITE(6,*) '$$$ Utilisation de l interpolation barycentrique ',
	950	, ' pour SP $$$ '
	951	WRITE(6,*) '-------------------------------------------------',
	952	,'--------------'
	953	CALL inter_barxy ( iml_dyn,jml_dyn -1,lon_rad,lat_rad ,
	954	, var_ana, iml-1, jml-1, lon_in2, lat_in2, jml, tmp_var)
	955	ELSE
	956	CALL grille_m(iml_dyn, jml_dyn , lon_rad, lat_rad, var_ana,
	957	. iml-1, jml, lon_in, lat_in, tmp_var )
	958	ENDIF
	959
	960	CALL gr_int_dyn(tmp_var, psol_dyn, iml-1, jml)
	961	!
	962	IF ( .NOT.ALLOCATED(tsol)) THEN
	963	! These variables may have been allocated by the need to
	964	! create a start field for them or by the varibale
	965	! coming out of the restart file. In case we dor have it we will initialize it.
	966	!
	967	CALL start_init_phys( iml, jml, lon_in, lat_in,jml2,lon_in2,
	968	. lat_in2 , interbar )
	969	ELSE
	970	IF ( SIZE(tsol) .NE. SIZE(psol_dyn) ) THEN
	971	WRITE(,) 'start_init_dyn :'
	972	WRITE(,) 'The temperature field we have does not ',
	973	. 'have the right size'
	974	STOP
	975	ENDIF
	976	ENDIF
	977	IF ( .NOT.ALLOCATED(phis)) THEN
	978	!
	979	! These variables may have been allocated by the need to create a start field for them or by the varibale
	980	! coming out of the restart file. In case we dor have it we will initialize it.
	981	!
	982	CALL start_init_orog( iml, jml, lon_in, lat_in, jml2, lon_in2 ,
	983	. lat_in2 , interbar )
	984	!
	985	ELSE
	986	!
	987	IF (SIZE(phis) .NE. SIZE(psol_dyn)) THEN
	988	!
	989	WRITE(,) 'start_init_dyn :'
	990	WRITE(,) 'The orography field we have does not ',
	991	. ' have the right size'
	992	STOP
	993	ENDIF
	994	!
	995	ENDIF
	996	!
	997	! PSOL is computed in Pascals
	998	!
	999	!
	1000	DO j = 1, jml
	1001	DO i = 1, iml-1
	1002	psol_dyn(i,j) = psol_dyn(i,j)*(1.0+(z(i,j)-phis(i,j))
	1003	. /287.0/tsol(i,j))
	1004	ENDDO
	1005	psol_dyn(iml,j) = psol_dyn(1,j)
	1006	ENDDO
	1007	!
	1008	!
	1009	ALLOCATE(xppn(iml-1))
	1010	ALLOCATE(xpps(iml-1))
	1011	!
	1012	DO i = 1, iml-1
	1013	xppn(i) = aire( i,1) * psol_dyn( i,1)
	1014	xpps(i) = aire( i,jml) * psol_dyn( i,jml)
	1015	ENDDO
	1016	!
	1017	DO i = 1, iml
	1018	psol_dyn(i,1 ) = SUM(xppn)/apoln
	1019	psol_dyn(i,jml) = SUM(xpps)/apols
	1020	ENDDO
	1021	!
	1022	RETURN
	1023	!
	1024	END SUBROUTINE start_init_dyn
	1025	!
	1026	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	1027	!
	1028	SUBROUTINE start_inter_3d(varname, iml, jml, lml, lon_in,
	1029	. lat_in, jml2, lon_in2, lat_in2, pls_in, var3d, interbar )
	1030	!
	1031	! This subroutine gets a variables from a 3D file and does the interpolations needed
	1032	!
	1033	!
	1034	! ARGUMENTS
	1035	!
	1036	CHARACTER() :: varname
	1037	INTEGER :: iml, jml, lml, jml2
	1038	REAL :: lon_in(iml), lat_in(jml), pls_in(iml, jml, lml)
	1039	REAL :: lon_in2(iml) , lat_in2(jml2)
	1040	REAL :: var3d(iml, jml, lml)
	1041	LOGICAL interbar
	1042	real chmin,chmax
	1043	!
	1044	! LOCAL
	1045	!
	1046	CHARACTER*25 title
	1047	INTEGER :: ii, ij, il, jsort,i,j,l
	1048	REAL :: bx, by
	1049	REAL, ALLOCATABLE :: lon_rad(:), lat_rad(:)
	1050	REAL, ALLOCATABLE :: lon_ini(:), lat_ini(:) , lev_dyn(:)
	1051	REAL, ALLOCATABLE :: var_tmp2d(:,:), var_tmp3d(:,:,:)
	1052	REAL, ALLOCATABLE :: ax(:), ay(:), yder(:)
	1053	REAL, ALLOCATABLE :: varrr(:,:,:)
	1054	INTEGER, ALLOCATABLE :: lind(:)
	1055	!
	1056	LOGICAL :: check = .TRUE.
	1057	!
	1058	IF ( .NOT. ALLOCATED(var_ana3d)) THEN
	1059	ALLOCATE(var_ana3d(iml_dyn, jml_dyn, llm_dyn))
	1060	ENDIF
	1061	ALLOCATE(varrr(iml_dyn, jml_dyn, llm_dyn))
	1062	!
	1063	!
	1064	IF ( check) WRITE(,) 'Going into flinget to extract the 3D ',
	1065	. ' field.', fid_dyn
	1066	IF ( check) WRITE(,) fid_dyn, varname, iml_dyn, jml_dyn,
	1067	. llm_dyn,ttm_dyn
	1068	!
	1069	CALL flinget(fid_dyn, varname, iml_dyn, jml_dyn, llm_dyn,
	1070	. ttm_dyn, 1, 1, var_ana3d)
	1071	!
	1072	IF ( check) WRITE(,) 'Allocating space for the interpolation',
	1073	. iml, jml, llm_dyn
	1074	!
	1075	ALLOCATE(lon_rad(iml_dyn))
	1076	ALLOCATE(lon_ini(iml_dyn))
	1077
	1078	IF ( MAXVAL(lon_dyn(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	1079	lon_ini(:) = lon_dyn(:,1) * 2.0 * ASIN(1.0) / 180.0
	1080	ELSE
	1081	lon_ini(:) = lon_dyn(:,1)
	1082	ENDIF
	1083
	1084	ALLOCATE(lat_rad(jml_dyn))
	1085	ALLOCATE(lat_ini(jml_dyn))
	1086
	1087	ALLOCATE(lev_dyn(llm_dyn))
	1088
	1089	IF ( MAXVAL(lat_dyn(:,:)) .GT. 2.0 * ASIN(1.0) ) THEN
	1090	lat_ini(:) = lat_dyn(1,:) * 2.0 * ASIN(1.0) / 180.0
	1091	ELSE
	1092	lat_ini(:) = lat_dyn(1,:)
	1093	ENDIF
	1094	!
	1095
	1096	CALL conf_dat3d ( varname,iml_dyn, jml_dyn, llm_dyn, lon_ini,
	1097	. lat_ini, levdyn_ini, lon_rad, lat_rad, lev_dyn, var_ana3d ,
	1098	, interbar )
	1099
	1100	ALLOCATE(var_tmp2d(iml-1, jml))
	1101	ALLOCATE(var_tmp3d(iml, jml, llm_dyn))
	1102	ALLOCATE(ax(llm_dyn))
	1103	ALLOCATE(ay(llm_dyn))
	1104	ALLOCATE(yder(llm_dyn))
	1105	ALLOCATE(lind(llm_dyn))
	1106	!
	1107
	1108	DO il=1,llm_dyn
	1109	!
	1110	IF( interbar ) THEN
	1111	IF( il.EQ.1 ) THEN
	1112	WRITE(6,*) '-------------------------------------------------',
	1113	,'--------------'
	1114	WRITE(6,*) '$$$ Utilisation de l interpolation barycentrique ',
	1115	, ' pour ', varname
	1116	WRITE(6,*) '-------------------------------------------------',
	1117	,'--------------'
	1118	ENDIF
	1119	CALL inter_barxy ( iml_dyn, jml_dyn -1,lon_rad, lat_rad,
	1120	, var_ana3d(:,:,il),iml-1, jml2, lon_in2, lat_in2,jml,var_tmp2d )
	1121	ELSE
	1122	CALL grille_m(iml_dyn, jml_dyn, lon_rad, lat_rad,
	1123	. var_ana3d(:,:,il), iml-1, jml, lon_in, lat_in, var_tmp2d )
	1124	ENDIF
	1125	!
	1126	CALL gr_int_dyn(var_tmp2d, var_tmp3d(:,:,il), iml-1, jml)
	1127	!
	1128	ENDDO
	1129	!
	1130	DO il=1,llm_dyn
	1131	lind(il) = llm_dyn-il+1
	1132	ENDDO
	1133	!
	1134	c
	1135	c ... Pour l'interpolation verticale ,on interpole du haut de l'atmosphere
	1136	c vers le sol ...
	1137	c
	1138	DO ij=1,jml
	1139	DO ii=1,iml-1
	1140	!
	1141	ax(:) = lev_dyn(lind(:))
	1142	ay(:) = var_tmp3d(ii, ij, lind(:))
	1143	!
	1144
	1145	CALL SPLINE(ax, ay, llm_dyn, 1.e30, 1.e30, yder)
	1146	!
	1147	DO il=1,lml
	1148	bx = pls_in(ii, ij, il)
	1149	CALL SPLINT(ax, ay, yder, llm_dyn, bx, by)
	1150	var3d(ii, ij, il) = by
	1151	ENDDO
	1152	!
	1153	ENDDO
	1154	var3d(iml, ij, :) = var3d(1, ij, :)
	1155	ENDDO
	1156
	1157	do il=1,lml
	1158	call minmax(iml*jml,var3d(1,1,il),chmin,chmax)
	1159	SELECTCASE(varname)
	1160	CASE('U')
	1161	WRITE(,) ' U min max l ',il,chmin,chmax
	1162	CASE('V')
	1163	WRITE(,) ' V min max l ',il,chmin,chmax
	1164	CASE('TEMP')
	1165	WRITE(,) ' TEMP min max l ',il,chmin,chmax
	1166	CASE('R')
	1167	WRITE(,) ' R min max l ',il,chmin,chmax
	1168	END SELECT
	1169	enddo
	1170
	1171	DEALLOCATE(lon_rad)
	1172	DEALLOCATE(lat_rad)
	1173	DEALLOCATE(var_tmp2d)
	1174	DEALLOCATE(var_tmp3d)
	1175	DEALLOCATE(ax)
	1176	DEALLOCATE(ay)
	1177	DEALLOCATE(yder)
	1178	DEALLOCATE(lind)
	1179
	1180	!
	1181	RETURN
	1182	!
	1183	END SUBROUTINE start_inter_3d
	1184	!
	1185	END MODULE startvar

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format