source: LMDZ.3.3/trunk/libf/phylmd/cv_driver.F @ 5306

Last change on this file since 5306 was 416, checked in by lmdzadmin, 22 years ago

Inclusion initiale

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 22.6 KB
Line 
1      SUBROUTINE cv_driver(len,nd,ndp1,ntra,iflag_con,
2     &                   t1,q1,qs1,u1,v1,tra1,
3     &                   p1,ph1,iflag1,ft1,fq1,fu1,fv1,ftra1,
4     &                   precip1,
5     &                   cbmf1,sig1,w01,
6     &                   delt,Ma1,upwd1,dnwd1,dnwd01,qcondc1,wd1,cape1)
7C
8      implicit none
9C
10C.............................START PROLOGUE............................
11C
12C PARAMETERS:
13C      Name            Type         Usage            Description
14C   ----------      ----------     -------  ----------------------------
15C
16C      len           Integer        Input        first (i) dimension
17C      nd            Integer        Input        vertical (k) dimension
18C      ndp1          Integer        Input        nd + 1
19C      ntra          Integer        Input        number of tracors
20C      iflag_con     Integer        Input        version of convect (3/4)
21C      t1            Real           Input        temperature
22C      q1            Real           Input        specific hum
23C      qs1           Real           Input        sat specific hum
24C      u1            Real           Input        u-wind
25C      v1            Real           Input        v-wind
26C      tra1          Real           Input        tracors
27C      p1            Real           Input        full level pressure
28C      ph1           Real           Input        half level pressure
29C      iflag1        Integer        Output       flag for Emanuel conditions
30C      ft1           Real           Output       temp tend
31C      fq1           Real           Output       spec hum tend
32C      fu1           Real           Output       u-wind tend
33C      fv1           Real           Output       v-wind tend
34C      ftra1         Real           Output       tracor tend
35C      precip1       Real           Output       precipitation
36C      cbmf1         Real           Output       cloud base mass flux
37C      sig1          Real           In/Out       section adiabatic updraft
38C      w01           Real           In/Out       vertical velocity within adiab updraft
39C      delt          Real           Input        time step
40C      Ma1           Real           Output       mass flux adiabatic updraft
41C      upwd1         Real           Output       total upward mass flux (adiab+mixed)
42C      dnwd1         Real           Output       saturated downward mass flux (mixed)
43C      dnwd01        Real           Output       unsaturated downward mass flux
44C      qcondc1       Real           Output       in-cld mixing ratio of condensed water
45C      wd1           Real           Output       downdraft velocity scale for sfc fluxes
46C      cape1         Real           Output       CAPE
47C
48C S. Bony, Mar 2002:
49C       * Several modules corresponding to different physical processes
50C       * Several versions of convect may be used:
51C               - iflag_con=3: version lmd  (previously named convect3)
52C               - iflag_con=4: version 4.3b (vect. version, previously convect1/2)
53C   + tard:     - iflag_con=5: version lmd with ice (previously named convectg)
54C S. Bony, Oct 2002:
55C       * Vectorization of convect3 (ie version lmd)
56C
57C..............................END PROLOGUE.............................
58c
59c
60#include "dimensions.h"
61#include "dimphy.h"
62
63      integer len
64      integer nd
65      integer ndp1
66      integer noff
67      integer iflag_con
68      integer ntra
69      real t1(len,nd)
70      real q1(len,nd)
71      real qs1(len,nd)
72      real u1(len,nd)
73      real v1(len,nd)
74      real p1(len,nd)
75      real ph1(len,ndp1)
76      integer iflag1(len)
77      real ft1(len,nd)
78      real fq1(len,nd)
79      real fu1(len,nd)
80      real fv1(len,nd)
81      real precip1(len)
82      real cbmf1(len)
83      real Ma1(len,nd)
84      real upwd1(len,nd)
85      real dnwd1(len,nd)
86      real dnwd01(len,nd)
87
88      real qcondc1(len,nd)     ! cld
89      real wd1(len)            ! gust
90      real cape1(len)     
91
92      real tra1(len,nd,ntra)
93      real ftra1(len,nd,ntra)
94
95      real delt
96
97!-------------------------------------------------------------------
98! --- ARGUMENTS
99!-------------------------------------------------------------------
100! --- On input:
101!
102!  t:   Array of absolute temperature (K) of dimension ND, with first
103!       index corresponding to lowest model level. Note that this array
104!       will be altered by the subroutine if dry convective adjustment
105!       occurs and if IPBL is not equal to 0.
106!
107!  q:   Array of specific humidity (gm/gm) of dimension ND, with first
108!       index corresponding to lowest model level. Must be defined
109!       at same grid levels as T. Note that this array will be altered
110!       if dry convective adjustment occurs and if IPBL is not equal to 0.
111!
112!  qs:  Array of saturation specific humidity of dimension ND, with first
113!       index corresponding to lowest model level. Must be defined
114!       at same grid levels as T. Note that this array will be altered
115!       if dry convective adjustment occurs and if IPBL is not equal to 0.
116!
117!  u:   Array of zonal wind velocity (m/s) of dimension ND, witth first
118!       index corresponding with the lowest model level. Defined at
119!       same levels as T. Note that this array will be altered if
120!       dry convective adjustment occurs and if IPBL is not equal to 0.
121!
122!  v:   Same as u but for meridional velocity.
123!
124!  tra: Array of passive tracer mixing ratio, of dimensions (ND,NTRA),
125!       where NTRA is the number of different tracers. If no
126!       convective tracer transport is needed, define a dummy
127!       input array of dimension (ND,1). Tracers are defined at
128!       same vertical levels as T. Note that this array will be altered
129!       if dry convective adjustment occurs and if IPBL is not equal to 0.
130!
131!  p:   Array of pressure (mb) of dimension ND, with first
132!       index corresponding to lowest model level. Must be defined
133!       at same grid levels as T.
134!
135!  ph:  Array of pressure (mb) of dimension ND+1, with first index
136!       corresponding to lowest level. These pressures are defined at
137!       levels intermediate between those of P, T, Q and QS. The first
138!       value of PH should be greater than (i.e. at a lower level than)
139!       the first value of the array P.
140!
141!  nl:  The maximum number of levels to which convection can penetrate, plus 1.
142!       NL MUST be less than or equal to ND-1.
143!
144!  delt: The model time step (sec) between calls to CONVECT
145!
146!----------------------------------------------------------------------------
147! ---   On Output:
148!
149!  iflag: An output integer whose value denotes the following:
150!       VALUE   INTERPRETATION
151!       -----   --------------
152!         0     Moist convection occurs.
153!         1     Moist convection occurs, but a CFL condition
154!               on the subsidence warming is violated. This
155!               does not cause the scheme to terminate.
156!         2     Moist convection, but no precip because ep(inb) lt 0.0001
157!         3     No moist convection because new cbmf is 0 and old cbmf is 0.
158!         4     No moist convection; atmosphere is not
159!               unstable
160!         6     No moist convection because ihmin le minorig.
161!         7     No moist convection because unreasonable
162!               parcel level temperature or specific humidity.
163!         8     No moist convection: lifted condensation
164!               level is above the 200 mb level.
165!         9     No moist convection: cloud base is higher
166!               then the level NL-1.
167!
168!  ft:   Array of temperature tendency (K/s) of dimension ND, defined at same
169!        grid levels as T, Q, QS and P.
170!
171!  fq:   Array of specific humidity tendencies ((gm/gm)/s) of dimension ND,
172!        defined at same grid levels as T, Q, QS and P.
173!
174!  fu:   Array of forcing of zonal velocity (m/s^2) of dimension ND,
175!        defined at same grid levels as T.
176!
177!  fv:   Same as FU, but for forcing of meridional velocity.
178!
179!  ftra: Array of forcing of tracer content, in tracer mixing ratio per
180!        second, defined at same levels as T. Dimensioned (ND,NTRA).
181!
182!  precip: Scalar convective precipitation rate (mm/day).
183!
184!  wd:   A convective downdraft velocity scale. For use in surface
185!        flux parameterizations. See convect.ps file for details.
186!
187!  tprime: A convective downdraft temperature perturbation scale (K).
188!          For use in surface flux parameterizations. See convect.ps
189!          file for details.
190!
191!  qprime: A convective downdraft specific humidity
192!          perturbation scale (gm/gm).
193!          For use in surface flux parameterizations. See convect.ps
194!          file for details.
195!
196!  cbmf: The cloud base mass flux ((kg/m**2)/s). THIS SCALAR VALUE MUST
197!        BE STORED BY THE CALLING PROGRAM AND RETURNED TO CONVECT AT
198!        ITS NEXT CALL. That is, the value of CBMF must be "remembered"
199!        by the calling program between calls to CONVECT.
200!
201!  det:   Array of detrainment mass flux of dimension ND.
202!
203!-------------------------------------------------------------------
204c
205c  Local arrays
206c
207
208      integer i,k,n,il,j
209      integer icbmax
210      integer nk1(klon)
211      integer icb1(klon)
212      integer icbs1(klon)
213
214      real plcl1(klon)
215      real tnk1(klon)
216      real qnk1(klon)
217      real gznk1(klon)
218      real pnk1(klon)
219      real qsnk1(klon)
220      real pbase1(klon)
221      real buoybase1(klon)
222
223      real lv1(klon,klev)
224      real cpn1(klon,klev)
225      real tv1(klon,klev)
226      real gz1(klon,klev)
227      real hm1(klon,klev)
228      real h1(klon,klev)
229      real tp1(klon,klev)
230      real tvp1(klon,klev)
231      real clw1(klon,klev)
232      real sig1(klon,klev)
233      real w01(klon,klev)
234      real th1(klon,klev)
235c
236      integer ncum
237c
238c (local) compressed fields:
239c
240      integer nloc
241      parameter (nloc=klon) ! pour l'instant
242
243      integer idcum(nloc)
244      integer iflag(nloc),nk(nloc),icb(nloc)
245      integer nent(nloc,klev)
246      integer icbs(nloc)
247      integer inb(nloc), inbis(nloc)
248
249      real cbmf(nloc),plcl(nloc),tnk(nloc),qnk(nloc),gznk(nloc)
250      real t(nloc,klev),q(nloc,klev),qs(nloc,klev)
251      real u(nloc,klev),v(nloc,klev)
252      real gz(nloc,klev),h(nloc,klev),lv(nloc,klev),cpn(nloc,klev)
253      real p(nloc,klev),ph(nloc,klev+1),tv(nloc,klev),tp(nloc,klev)
254      real clw(nloc,klev)
255      real dph(nloc,klev)
256      real pbase(nloc), buoybase(nloc), th(nloc,klev)
257      real tvp(nloc,klev)
258      real sig(nloc,klev), w0(nloc,klev)
259      real hp(nloc,klev), ep(nloc,klev), sigp(nloc,klev)
260      real frac(nloc), buoy(nloc,klev)
261      real cape(nloc)
262      real m(nloc,klev), ment(nloc,klev,klev), qent(nloc,klev,klev)
263      real uent(nloc,klev,klev), vent(nloc,klev,klev)
264      real ments(nloc,klev,klev), qents(nloc,klev,klev)
265      real sij(nloc,klev,klev), elij(nloc,klev,klev)
266      real mp(nloc,klev), qp(nloc,klev), up(nloc,klev), vp(nloc,klev)
267      real wt(nloc,klev), water(nloc,klev), evap(nloc,klev)
268      real b(nloc,klev), ft(nloc,klev), fq(nloc,klev)
269      real fu(nloc,klev), fv(nloc,klev)
270      real upwd(nloc,klev), dnwd(nloc,klev), dnwd0(nloc,klev)
271      real Ma(nloc,klev), mike(nloc,klev), tls(nloc,klev)
272      real tps(nloc,klev), qprime(nloc), tprime(nloc)
273      real precip(nloc)
274      real tra(nloc,klev,ntra), trap(nloc,klev,ntra)
275      real ftra(nloc,klev,ntra), traent(nloc,klev,klev,ntra)
276      real qcondc(nloc,klev)  ! cld
277      real wd(nloc)           ! gust
278
279!-------------------------------------------------------------------
280! --- SET CONSTANTS AND PARAMETERS
281!-------------------------------------------------------------------
282
283c -- set simulation flags:
284c   (common cvflag)
285
286       CALL cv_flag
287
288c -- set thermodynamical constants:
289c       (common cvthermo)
290
291       CALL cv_thermo(iflag_con)
292
293c -- set convect parameters
294c
295c       includes microphysical parameters and parameters that
296c       control the rate of approach to quasi-equilibrium)
297c       (common cvparam)
298
299      if (iflag_con.eq.3) then
300       CALL cv3_param(nd,delt)
301      endif
302
303      if (iflag_con.eq.4) then
304       CALL cv_param(nd)
305      endif
306
307!---------------------------------------------------------------------
308! --- INITIALIZE OUTPUT ARRAYS AND PARAMETERS
309!---------------------------------------------------------------------
310
311      do 20 k=1,nd
312        do 10 i=1,len
313         ft1(i,k)=0.0
314         fq1(i,k)=0.0
315         fu1(i,k)=0.0
316         fv1(i,k)=0.0
317         tvp1(i,k)=0.0
318         tp1(i,k)=0.0
319         clw1(i,k)=0.0
320         gz1(i,k) = 0.
321
322         Ma1(i,k)=0.0
323         upwd1(i,k)=0.0
324         dnwd1(i,k)=0.0
325         dnwd01(i,k)=0.0
326         qcondc1(i,k)=0.0
327 10     continue
328 20   continue
329
330      do 30 j=1,ntra
331       do 31 k=1,nd
332        do 32 i=1,len
333         ftra1(i,k,j)=0.0
334 32     continue   
335 31    continue   
336 30   continue   
337
338      do 60 i=1,len
339        precip1(i)=0.0
340        iflag1(i)=0
341        wd1(i)=0.0
342        cape1(i)=0.0
343 60   continue
344
345      if (iflag_con.eq.3) then
346        do il=1,len
347         sig1(il,nd)=sig1(il,nd)+1.
348         sig1(il,nd)=amin1(sig1(il,nd),12.1)
349        enddo
350      endif
351
352!--------------------------------------------------------------------
353! --- CALCULATE ARRAYS OF GEOPOTENTIAL, HEAT CAPACITY & STATIC ENERGY
354!--------------------------------------------------------------------
355
356      if (iflag_con.eq.3) then
357       CALL cv3_prelim(len,nd,ndp1,t1,q1,p1,ph1            ! nd->na
358     o               ,lv1,cpn1,tv1,gz1,h1,hm1,th1)
359      endif
360
361      if (iflag_con.eq.4) then
362       CALL cv_prelim(len,nd,ndp1,t1,q1,p1,ph1
363     o               ,lv1,cpn1,tv1,gz1,h1,hm1)
364      endif
365
366!--------------------------------------------------------------------
367! --- CONVECTIVE FEED
368!--------------------------------------------------------------------
369
370      if (iflag_con.eq.3) then
371       CALL cv3_feed(len,nd,t1,q1,qs1,p1,ph1,hm1,gz1           ! nd->na
372     o         ,nk1,icb1,icbmax,iflag1,tnk1,qnk1,gznk1,plcl1)
373      endif
374
375      if (iflag_con.eq.4) then
376       CALL cv_feed(len,nd,t1,q1,qs1,p1,hm1,gz1
377     o         ,nk1,icb1,icbmax,iflag1,tnk1,qnk1,gznk1,plcl1)
378      endif
379
380!--------------------------------------------------------------------
381! --- UNDILUTE (ADIABATIC) UPDRAFT / 1st part
382! (up through ICB for convect4, up through ICB+1 for convect3)
383!     Calculates the lifted parcel virtual temperature at nk, the
384!     actual temperature, and the adiabatic liquid water content.
385!--------------------------------------------------------------------
386
387      if (iflag_con.eq.3) then
388       CALL cv3_undilute1(len,nd,t1,q1,qs1,gz1,plcl1,p1,nk1,icb1  ! nd->na
389     o                        ,tp1,tvp1,clw1,icbs1)
390      endif
391
392      if (iflag_con.eq.4) then
393       CALL cv_undilute1(len,nd,t1,q1,qs1,gz1,p1,nk1,icb1,icbmax
394     :                        ,tp1,tvp1,clw1)
395      endif
396
397!-------------------------------------------------------------------
398! --- TRIGGERING
399!-------------------------------------------------------------------
400
401      if (iflag_con.eq.3) then
402       CALL cv3_trigger(len,nd,icb1,plcl1,p1,th1,tv1,tvp1      ! nd->na
403     o                 ,pbase1,buoybase1,iflag1,sig1,w01)
404      endif
405
406      if (iflag_con.eq.4) then
407       CALL cv_trigger(len,nd,icb1,cbmf1,tv1,tvp1,iflag1)
408      endif
409
410!=====================================================================
411! --- IF THIS POINT IS REACHED, MOIST CONVECTIVE ADJUSTMENT IS NECESSARY
412!=====================================================================
413
414      ncum=0
415      do 400 i=1,len
416        if(iflag1(i).eq.0)then
417           ncum=ncum+1
418           idcum(ncum)=i
419        endif
420 400  continue
421
422c       print*,'klon, ncum = ',len,ncum
423
424      IF (ncum.gt.0) THEN
425
426!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
427! --- COMPRESS THE FIELDS
428!               (-> vectorization over convective gridpoints)
429!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
430
431      if (iflag_con.eq.3) then
432       CALL cv3_compress( len,nloc,ncum,nd,ntra
433     :    ,iflag1,nk1,icb1,icbs1
434     :    ,plcl1,tnk1,qnk1,gznk1,pbase1,buoybase1
435     :    ,t1,q1,qs1,u1,v1,gz1,th1
436     :    ,tra1
437     :    ,h1,lv1,cpn1,p1,ph1,tv1,tp1,tvp1,clw1
438     :    ,sig1,w01
439     o    ,iflag,nk,icb,icbs
440     o    ,plcl,tnk,qnk,gznk,pbase,buoybase
441     o    ,t,q,qs,u,v,gz,th
442     o    ,tra
443     o    ,h,lv,cpn,p,ph,tv,tp,tvp,clw
444     o    ,sig,w0  )
445      endif
446
447      if (iflag_con.eq.4) then
448       CALL cv_compress( len,nloc,ncum,nd
449     :    ,iflag1,nk1,icb1
450     :    ,cbmf1,plcl1,tnk1,qnk1,gznk1
451     :    ,t1,q1,qs1,u1,v1,gz1
452     :    ,h1,lv1,cpn1,p1,ph1,tv1,tp1,tvp1,clw1
453     o    ,iflag,nk,icb
454     o    ,cbmf,plcl,tnk,qnk,gznk
455     o    ,t,q,qs,u,v,gz,h,lv,cpn,p,ph,tv,tp,tvp,clw
456     o    ,dph )
457      endif
458
459!-------------------------------------------------------------------
460! --- UNDILUTE (ADIABATIC) UPDRAFT / second part :
461! ---   FIND THE REST OF THE LIFTED PARCEL TEMPERATURES
462! ---   &
463! ---   COMPUTE THE PRECIPITATION EFFICIENCIES AND THE
464! ---   FRACTION OF PRECIPITATION FALLING OUTSIDE OF CLOUD
465! ---   &
466! ---   FIND THE LEVEL OF NEUTRAL BUOYANCY
467!-------------------------------------------------------------------
468
469      if (iflag_con.eq.3) then
470       CALL cv3_undilute2(nloc,ncum,nd,icb,icbs,nk        !na->nd
471     :                        ,tnk,qnk,gznk,t,q,qs,gz
472     :                        ,p,h,tv,lv,pbase,buoybase,plcl
473     o                        ,inb,tp,tvp,clw,hp,ep,sigp,buoy)
474      endif
475
476      if (iflag_con.eq.4) then
477       CALL cv_undilute2(nloc,ncum,nd,icb,nk
478     :                        ,tnk,qnk,gznk,t,q,qs,gz
479     :                        ,p,dph,h,tv,lv
480     o             ,inb,inbis,tp,tvp,clw,hp,ep,sigp,frac)
481      endif
482
483!-------------------------------------------------------------------
484! --- CLOSURE
485!-------------------------------------------------------------------
486
487      if (iflag_con.eq.3) then
488       CALL cv3_closure(nloc,ncum,nd,icb,inb              ! na->nd
489     :                       ,pbase,p,ph,tv,buoy
490     o                       ,sig,w0,cape,m)
491      endif
492
493      if (iflag_con.eq.4) then
494       CALL cv_closure(nloc,ncum,nd,nk,icb
495     :                ,tv,tvp,p,ph,dph,plcl,cpn
496     o                ,iflag,cbmf)
497      endif
498
499!-------------------------------------------------------------------
500! --- MIXING
501!-------------------------------------------------------------------
502
503      if (iflag_con.eq.3) then
504       CALL cv3_mixing(nloc,ncum,nd,nd,ntra,icb,nk,inb    ! na->nd
505     :                     ,ph,t,q,qs,u,v,tra,h,lv,qnk
506     :                     ,hp,tv,tvp,ep,clw,m,sig
507     o ,ment,qent,uent,vent,sij,elij,ments,qents,traent)
508      endif
509
510      if (iflag_con.eq.4) then
511       CALL cv_mixing(nloc,ncum,nd,icb,nk,inb,inbis
512     :                     ,ph,t,q,qs,u,v,h,lv,qnk
513     :                     ,hp,tv,tvp,ep,clw,cbmf
514     o                     ,m,ment,qent,uent,vent,nent,sij,elij)
515      endif
516
517!-------------------------------------------------------------------
518! --- UNSATURATED (PRECIPITATING) DOWNDRAFTS
519!-------------------------------------------------------------------
520
521      if (iflag_con.eq.3) then
522       CALL cv3_unsat(nloc,ncum,nd,nd,ntra,icb,inb    ! na->nd
523     :               ,t,q,qs,gz,u,v,tra,p,ph
524     :               ,th,tv,lv,cpn,ep,sigp,clw
525     :               ,m,ment,elij,delt,plcl
526     o          ,mp,qp,up,vp,trap,wt,water,evap,b)
527      endif
528
529      if (iflag_con.eq.4) then
530       CALL cv_unsat(nloc,ncum,nd,inb,t,q,qs,gz,u,v,p,ph
531     :                   ,h,lv,ep,sigp,clw,m,ment,elij
532     o                   ,iflag,mp,qp,up,vp,wt,water,evap)
533      endif
534
535!-------------------------------------------------------------------
536! --- YIELD
537!     (tendencies, precipitation, variables of interface with other
538!      processes, etc)
539!-------------------------------------------------------------------
540
541      if (iflag_con.eq.3) then
542       CALL cv3_yield(nloc,ncum,nd,nd,ntra            ! na->nd
543     :                     ,icb,inb,delt
544     :                     ,t,q,u,v,tra,gz,p,ph,h,hp,lv,cpn,th
545     :                     ,ep,clw,m,tp,mp,qp,up,vp,trap
546     :                     ,wt,water,evap,b
547     :                     ,ment,qent,uent,vent,nent,elij,traent,sig
548     :                     ,tv,tvp
549     o                     ,iflag,precip,ft,fq,fu,fv,ftra
550     o                     ,upwd,dnwd,dnwd0,ma,mike,tls,tps,qcondc,wd)
551      endif
552
553      if (iflag_con.eq.4) then
554       CALL cv_yield(nloc,ncum,nd,nk,icb,inb,delt
555     :              ,t,q,u,v,gz,p,ph,h,hp,lv,cpn
556     :              ,ep,clw,frac,m,mp,qp,up,vp
557     :              ,wt,water,evap
558     :              ,ment,qent,uent,vent,nent,elij
559     :              ,tv,tvp
560     o              ,iflag,wd,qprime,tprime
561     o              ,precip,cbmf,ft,fq,fu,fv,Ma,qcondc)
562      endif
563
564!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
565! --- UNCOMPRESS THE FIELDS
566!^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
567
568
569      if (iflag_con.eq.3) then
570       CALL cv3_uncompress(nloc,len,ncum,nd,ntra,idcum
571     :          ,iflag
572     :          ,precip,sig,w0
573     :          ,ft,fq,fu,fv,ftra
574     :          ,Ma,upwd,dnwd,dnwd0,qcondc,wd,cape
575     o          ,iflag1
576     o          ,precip1,sig1,w01
577     o          ,ft1,fq1,fu1,fv1,ftra1
578     o          ,Ma1,upwd1,dnwd1,dnwd01,qcondc1,wd1,cape1 )
579      endif
580
581      if (iflag_con.eq.4) then
582       CALL cv_uncompress(nloc,len,ncum,nd,idcum
583     :          ,iflag
584     :          ,precip,cbmf
585     :          ,ft,fq,fu,fv
586     :          ,Ma,qcondc           
587     o          ,iflag1
588     o          ,precip1,cbmf1
589     o          ,ft1,fq1,fu1,fv1
590     o          ,Ma1,qcondc1 )           
591      endif
592
593      ENDIF ! ncum>0
594
5959999  continue
596
597      return
598      end
599
600!==================================================================
601      SUBROUTINE cv_flag
602      implicit none
603
604#include "cvflag.h"
605
606c -- si .TRUE., on rend la gravite plus explicite et eventuellement
607c differente de 10.0 dans convect3:
608      cvflag_grav = .FALSE.
609
610      return
611      end
612
613!==================================================================
614      SUBROUTINE cv_thermo(iflag_con)
615          implicit none
616
617c-------------------------------------------------------------
618c Set thermodynamical constants for convectL
619c-------------------------------------------------------------
620
621#include "YOMCST.h"
622#include "cvthermo.h"
623
624      integer iflag_con
625
626
627c original set from convect:
628      if (iflag_con.eq.4) then
629       cpd=1005.7
630       cpv=1870.0
631       cl=4190.0
632       rrv=461.5
633       rrd=287.04
634       lv0=2.501E6
635       g=9.8
636       t0=273.15
637       grav=g
638      endif
639
640c constants consistent with LMDZ:
641      if (iflag_con.eq.3) then
642       cpd = RCPD
643       cpv = RCPV
644       cl  = RCW
645       rrv = RV
646       rrd = RD
647       lv0 = RLVTT
648       g   = RG     ! not used in convect3
649c ori      t0  = RTT
650       t0  = 273.15 ! convect3 (RTT=273.16)
651       grav= 10.    ! implicitely or explicitely used in convect3
652      endif
653
654      rowl=1000.0 !(a quelle variable de YOMCST cela correspond-il?)
655
656      clmcpv=cl-cpv
657      clmcpd=cl-cpd
658      cpdmcp=cpd-cpv
659      cpvmcpd=cpv-cpd
660      cpvmcl=cl-cpv ! for convect3
661      eps=rrd/rrv
662      epsi=1.0/eps
663      epsim1=epsi-1.0
664c      ginv=1.0/g
665      ginv=1.0/grav
666      hrd=0.5*rrd
667
668      return
669      end
670
Note: See TracBrowser for help on using the repository browser.