Context Navigation

oasis.true @ 556

Last change on this file since 556 was 397, checked in by lmdzadmin, 22 years ago
Champs supplementaire dans le coupleur (calving) + dependance des routines "couplees" aux include LF
Property svn:eol-style set to `native` Property svn:executable set to ``* Property svn:keywords set to `Author Date Id Revision`
File size: 20.1 KB

Line
1	C $Id: oasis.true 397 2002-07-22 08:50:58Z lmdzadmin $
2	C****
3	C
4	C**** INICMA - Initialize coupled mode communication for atmosphere
5	C and exchange some initial information with Oasis
6	C
7	C Input:
8	C -----
9	C KASTP : total number of timesteps in atmospheric model
10	C KEXCH : frequency of exchange (in time steps)
11	C KSTEP : length of timestep (in seconds)
12	C
13	C -----------------------------------------------------------
14	C
15	SUBROUTINE inicma(kastp,kexch,kstep,imjm)
16	c
17	c INCLUDE "param.h"
18	c
19	INTEGER kastp, kexch, kstep,imjm
20	INTEGER iparal(3)
21	INTEGER ifcpl, idt, info, imxtag, istep, jf
22	c
23	#include "param_cou.h"
24	#include "inc_cpl.h"
25	CHARACTER*3 cljobnam ! experiment name
26	CHARACTER*6 clmodnam ! model name
27	c EM: not used by Oasis2.4
28	CEM CHARACTER*6 clbid(2) ! for CLIM_Init call (not used)
29	CEM ! must be dimensioned by the number of models
30	CEM INTEGER nbid(2) ! for CLIM_Init call (not used)
31	CEM ! must be dimensioned by the number of models
32	CHARACTER*5 cloasis ! coupler name (Oasis)
33	INTEGER imess(4)
34	INTEGER getpid ! system functions
35	INTEGER nuout
36	CEM LOGICAL llmodel
37	PARAMETER (nuout = 6)
38	c
39	#include "clim.h"
40	#include "mpiclim.h"
41	c
42	#include "oasis.h" ! contains the name of communication technique. Here
43	! cchan=CLIM only is possible.
44	c ! ctype=MPI2
45	c
46	C -----------------------------------------------------------
47	C
48	C* 1. Initializations
49	C ---------------
50	C
51	WRITE(nuout,*) ' '
52	WRITE(nuout,*) ' '
53	WRITE(nuout,*) ' ROUTINE INICMA'
54	WRITE(nuout,) ' *************'
55	WRITE(nuout,*) ' '
56	WRITE(nuout,*) ' '
57	c
58	c Define the model name
59	c
60	clmodnam = 'lmdz.x' ! as in $NBMODEL in Cpl/Nam/namcouple.tmp
61	c
62	c Define the coupler name
63	c
64	cloasis = 'Oasis' ! always 'Oasis' as in the coupler
65	c
66	c
67	c Define symbolic name for fields exchanged from atmos to coupler,
68	c must be the same as (1) of the field definition in namcouple:
69	c
70	cl_writ(1)='COSHFICE'
71	cl_writ(2)='COSHFOCE'
72	cl_writ(3)='CONSFICE'
73	cl_writ(4)='CONSFOCE'
74	cl_writ(5)='CODFLXDT'
75	c cl_writ(6)='COICTEMP'
76	cl_writ(6)='COTFSICE'
77	cl_writ(7)='COTFSOCE'
78	cl_writ(8)='COTOLPSU'
79	cl_writ(9)='COTOSPSU'
80	cl_writ(10)='CORUNCOA'
81	cl_writ(11)='CORIVFLU'
82	cl_writ(12)='COCALVIN'
83	c$$$ cl_writ(13)='COZOTAUX'
84	c$$$ cl_writ(14)='COZOTAUV'
85	c$$$ cl_writ(15)='COMETAUY'
86	c$$$ cl_writ(16)='COMETAUU'
87	cl_writ(13)='COTAUXXU'
88	cl_writ(14)='COTAUYYU'
89	cl_writ(15)='COTAUZZU'
90	cl_writ(16)='COTAUXXV'
91	cl_writ(17)='COTAUYYV'
92	cl_writ(18)='COTAUZZV'
93	c
94	c Define files name for fields exchanged from atmos to coupler,
95	c must be the same as (6) of the field definition in namcouple:
96	c
97	cl_f_writ(1)='flxatmos'
98	cl_f_writ(2)='flxatmos'
99	cl_f_writ(3)='flxatmos'
100	cl_f_writ(4)='flxatmos'
101	cl_f_writ(5)='flxatmos'
102	cl_f_writ(6)='flxatmos'
103	cl_f_writ(7)='flxatmos'
104	cl_f_writ(8)='flxatmos'
105	cl_f_writ(9)='flxatmos'
106	cl_f_writ(10)='flxatmos'
107	cl_f_writ(11)='flxatmos'
108	cl_f_writ(12)='flxatmos'
109	cl_f_writ(13)='flxatmos'
110	cl_f_writ(14)='flxatmos'
111	cl_f_writ(15)='flxatmos'
112	cl_f_writ(16)='flxatmos'
113	cl_f_writ(17)='flxatmos'
114	cl_f_writ(18)='flxatmos'
115
116	c
117	c
118	c Define symbolic name for fields exchanged from coupler to atmosphere,
119	c must be the same as (2) of the field definition in namcouple:
120	c
121	cl_read(1)='SISUTESW'
122	cl_read(2)='SIICECOV'
123	cl_read(3)='SIICEALW'
124	cl_read(4)='SIICTEMW'
125	c
126	c Define files names for fields exchanged from coupler to atmosphere,
127	c must be the same as (7) of the field definition in namcouple:
128	c
129	cl_f_read(1)='sstatmos'
130	cl_f_read(2)='sstatmos'
131	cl_f_read(3)='sstatmos'
132	cl_f_read(4)='sstatmos'
133	c
134	c
135	c Define the number of processors involved in the coupling for
136	c Oasis (=1) and each model (as last two INTEGER on $CHATYPE line
137	c in the namcouple); they will be stored in a COMMON in mpiclim.h
138	c (used for CLIM/MPI2 only)
139	mpi_nproc(0)=1
140	mpi_nproc(1)=1
141	mpi_nproc(2)=1
142	c
143	c Define infos to be sent initially to oasis
144	c
145	imess(1) = kastp ! total number of timesteps in atmospheric model
146	imess(2) = kexch ! period of exchange (in time steps)
147	imess(3) = kstep ! length of atmospheric timestep (in seconds)
148	imess(4) = getpid() ! PID of atmospheric model
149	c
150	c Initialization and exchange of initial info in the CLIM technique
151	c
152	IF (cchan.eq.'CLIM') THEN
153	c
154	c Define the experiment name :
155	c
156	cljobnam = 'CLI' ! as $JOBNAM in namcouple
157	c
158	c Start the coupling
159	c (see lib/clim/src/CLIM_Init for the definition of input parameters)
160	c
161	cEM clbid(1)=' '
162	cEM clbid(2)=' '
163	cEM nbid(1)=0
164	cEM nbid(2)=0
165	CEM llmodel=.true.
166	c
167	c Define the number of processors used by each model as in
168	c $CHATYPE line of namcouple (used for CLIM/MPI2 only)
169	mpi_totproc(1)=1
170	mpi_totproc(2)=1
171	c
172	c Define names of each model as in $NBMODEL line of namcouple
173	c (used for CLIM/MPI2 only)
174	cmpi_modnam(1)='lmdz.x'
175	cmpi_modnam(2)='opa.xx'
176	c Start the coupling
177	c
178	CALL CLIM_Init ( cljobnam, clmodnam, 3, 7,
179	* kastp, kexch, kstep,
180	* 5, 3600, 3600, info )
181	c
182	IF (info.ne.CLIM_Ok) THEN
183	WRITE ( nuout, *) ' inicma : pb init clim '
184	WRITE ( nuout, *) ' error code is = ', info
185	CALL halte('STOP in inicma')
186	ELSE
187	WRITE(nuout,*) 'inicma : init clim ok '
188	ENDIF
189	c
190	c For each coupling field, association of a port to its symbolic name
191	c
192	c -Define the parallel decomposition associated to the port of each
193	c field; here no decomposition for all ports.
194	iparal ( clim_strategy ) = clim_serial
195	iparal ( clim_length ) = imjm
196	iparal ( clim_offset ) = 0
197	c
198	c -Loop on total number of coupler-to-atmosphere fields
199	c (see lib/clim/src/CLIM_Define for the definition of input parameters)
200	DO jf=1, jpfldo2a
201	CALL CLIM_Define (cl_read(jf), clim_in , clim_double, iparal
202	$ , info )
203	WRITE(nuout,*) 'inicma : clim define done for ',jf
204	$ ,cl_read(jf)
205	END DO
206	c
207	c -Loop on total number of atmosphere-to-coupler fields
208	c (see lib/clim/src/CLIM_Define for the definition of input parameters)
209	DO jf=1, jpflda2o1+jpflda2o2
210	CALL CLIM_Define (cl_writ(jf), clim_out , clim_double,
211	$ iparal, info )
212	WRITE(nuout,*) 'inicma : clim define done for ',jf
213	$ ,cl_writ(jf)
214	END DO
215	c
216	WRITE(nuout,*) 'inicma : clim_define ok '
217	c
218	c -Join a pvm group, wait for other programs and broadcast usefull
219	c informations to Oasis and to the ocean (see lib/clim/src/CLIM_Start)
220	CALL CLIM_Start ( imxtag, info )
221	IF (info.ne.clim_ok) THEN
222	WRITE ( nuout, *) 'inicma : pb start clim '
223	WRITE ( nuout, *) ' error code is = ', info
224	CALL halte('stop in inicma')
225	ELSE
226	WRITE ( nuout, *) 'inicma : start clim ok '
227	ENDIF
228	c
229	c -Get initial information from Oasis
230	c (see lib/clim/src/CLIM_Stepi)
231	CALL CLIM_Stepi (cloasis, istep, ifcpl, idt, info)
232	IF (info .NE. clim_ok) THEN
233	WRITE ( UNIT = nuout, FMT = *)
234	$ ' warning : problem in getting step info ',
235	$ 'from oasis '
236	WRITE (UNIT = nuout, FMT = *)
237	$ ' ======= error code number = ', info
238	ELSE
239	WRITE (UNIT = nuout, FMT = *)
240	$ ' got step information from oasis '
241	ENDIF
242	WRITE ( nuout, *) ' number of tstep in oasis ', istep
243	WRITE ( nuout, *) ' exchange frequency in oasis ', ifcpl
244	WRITE ( nuout, *) ' length of tstep in oasis ', idt
245	ENDIF
246
247	RETURN
248	END
249
250	c $Id: oasis.true 397 2002-07-22 08:50:58Z lmdzadmin $
251	SUBROUTINE fromcpl(kt, imjm, sst, gla, tice, albedo)
252	c ======================================================================
253	c S. Valcke (02/99) adapted From L.Z.X Li: this subroutine reads the SST
254	c and Sea-Ice provided by the coupler with the CLIM (PVM exchange messages)
255	c technique.
256	c======================================================================
257	IMPLICIT none
258	INTEGER imjm, kt
259	REAL sst(imjm) ! sea-surface-temperature
260	REAL gla(imjm) ! sea-ice
261	REAL tice(imjm) ! temp glace
262	REAL albedo(imjm) ! albedo glace
263	c
264	INTEGER nuout ! listing output unit
265	PARAMETER (nuout=6)
266	c
267	INTEGER nuread, ios, iflag, icpliter
268	INTEGER info, jf
269	c
270	#include "clim.h"
271	c
272	#include "oasis.h"
273	#include "param_cou.h"
274	c
275	#include "inc_cpl.h"
276	c
277	c
278	WRITE (nuout,*) ' '
279	WRITE (nuout,*) 'Fromcpl: Reading fields from CPL, kt=',kt
280	WRITE (nuout,*) ' '
281	CALL flush (nuout)
282
283
284	IF (cchan.eq.'CLIM') THEN
285
286	c
287	c -Get interpolated oceanic fields from Oasis
288	c
289	DO jf=1,jpfldo2a
290	IF (jf.eq.1) CALL CLIM_Import (cl_read(jf) , kt, sst, info)
291	IF (jf.eq.2) CALL CLIM_Import (cl_read(jf) , kt, gla, info)
292	IF (jf.eq.3) CALL CLIM_Import (cl_read(jf), kt,albedo, info)
293	IF (jf.eq.4) CALL CLIM_Import (cl_read(jf) , kt, tice, info)
294	IF ( info .NE. CLIM_Ok) THEN
295	WRITE(nuout,*)'Pb in reading ', cl_read(jf), jf
296	WRITE(nuout,*)'Couplage kt is = ',kt
297	WRITE(nuout,*)'CLIM error code is = ', info
298	CALL halte('STOP in fromcpl.F')
299	ENDIF
300	END DO
301
302	ENDIF
303	c
304	RETURN
305	END
306
307	c $Id: oasis.true 397 2002-07-22 08:50:58Z lmdzadmin $
308	SUBROUTINE intocpl(kt, imjm, fsolice, fsolwat, fnsolice, fnsolwat,
309	$ fnsicedt, evice, evwat, lpre, spre, dirunoff, rivrunoff,
310	$ calving, tauxx_u, tauyy_u, tauzz_u, tauxx_v, tauyy_v, tauzz_v
311	$ , last)
312	c ======================================================================
313	c S. Valcke (02/99) adapted From L.Z.X Li: this subroutine provides the
314	c atmospheric coupling fields to the coupler with the CLIM (PVM exchange
315	c messages) technique.
316	c IF last time step, writes output fields to binary files.
317	c ======================================================================
318	IMPLICIT NONE
319	INTEGER kt, imjm
320	c
321	REAL fsolice(imjm)
322	REAL fsolwat(imjm)
323	REAL fnsolwat(imjm)
324	REAL fnsolice(imjm)
325	REAL fnsicedt(imjm)
326	REAL evice(imjm)
327	REAL evwat(imjm)
328	REAL lpre(imjm)
329	REAL spre(imjm)
330	REAL dirunoff(imjm)
331	REAL rivrunoff(imjm)
332	REAL calving(imjm)
333	c$$$ REAL tauxu(imjm)
334	c$$$ REAL tauxv(imjm)
335	c$$$ REAL tauyu(imjm)
336	c$$$ REAL tauyv(imjm)
337	REAL tauxx_u(imjm)
338	REAL tauxx_v(imjm)
339	REAL tauyy_u(imjm)
340	REAL tauyy_v(imjm)
341	REAL tauzz_u(imjm)
342	REAL tauzz_v(imjm)
343	LOGICAL last
344	c
345	INTEGER nuout
346	PARAMETER (nuout = 6)
347	c
348	#include "clim.h"
349	#include "param_cou.h"
350	#include "inc_cpl.h"
351	c
352	CHARACTER*8 file_name(jpmaxfld)
353	INTEGER max_file
354	INTEGER file_unit_max, file_unit(jpmaxfld),
355	$ file_unit_field(jpmaxfld)
356
357	INTEGER icstep, info, jn, jf, ierror
358	LOGICAL trouve
359	c
360	#include "oasis.h"
361	c
362	icstep=kt
363	c
364	WRITE(nuout,*) ' '
365	WRITE(nuout,*) 'Intocpl: sending fields to CPL, kt= ', kt
366	WRITE(nuout,*) 'last ', last
367	WRITE(nuout,*)
368
369	IF (last) THEN
370	c
371	c -WRITE fields to binary files for coupler restart at last time step
372	c
373	c -initialisation and files opening
374	c
375	max_file=1
376	file_unit_max=99
377	c -keeps first file name
378	file_name(max_file)=cl_f_writ(max_file)
379	c -keeps first file unit
380	file_unit(max_file)=file_unit_max
381	c -decrements file unit maximum
382	file_unit_max=file_unit_max-1
383	c -keeps file unit for field
384	file_unit_field(1)=file_unit(max_file)
385	c
386	c -different files names counter
387	c
388	DO jf= 2, jpflda2o1 + jpflda2o2
389	trouve=.false.
390	DO jn= 1, max_file
391	IF (.not.trouve) THEN
392	IF (cl_f_writ(jf).EQ.file_name(jn)) THEN
393	c -keep file unit for field
394	file_unit_field(jf)=file_unit(jn)
395	trouve=.true.
396	END IF
397	END IF
398	END DO
399	IF (.not.trouve) then
400	c -increment the number of different files
401	max_file=max_file+1
402	c -keep file name
403	file_name(max_file)=cl_f_writ(jf)
404	c -keep file unit for file
405	file_unit(max_file)=file_unit_max
406	c -keep file unit for field
407	file_unit_field(jf)=file_unit(max_file)
408	c -decrement unit maximum number from 99 to 98, ...
409	file_unit_max=file_unit_max-1
410	END IF
411	END DO
412	c
413	DO jn=1, max_file
414	OPEN (file_unit(jn), FILE=file_name(jn), FORM='UNFORMATTED')
415	WRITE(,) 'Opening FILE ', file_unit(jn), ' '
416	$ , file_name(jn)
417	REWIND(file_unit(jn))
418	END DO
419	c
420	c WRITE fields to files
421	DO jf=1, jpflda2o1 + jpflda2o2
422	IF (jf.eq.1)
423	$ CALL locwrite(cl_writ(jf),fsolice, imjm,
424	$ file_unit_field(jf), ierror)
425	IF (jf.eq.2)
426	$ CALL locwrite(cl_writ(jf),fsolwat, imjm,
427	$ file_unit_field(jf), ierror)
428	IF (jf.eq.3)
429	$ CALL locwrite(cl_writ(jf),fnsolice, imjm,
430	$ file_unit_field(jf), ierror)
431	IF (jf.eq.4)
432	$ CALL locwrite(cl_writ(jf),fnsolwat, imjm,
433	$ file_unit_field(jf), ierror)
434	IF (jf.eq.5)
435	$ CALL locwrite(cl_writ(jf),fnsicedt, imjm,
436	$ file_unit_field(jf), ierror)
437	c IF (jf.eq.6)
438	c $ CALL locwrite(cl_writ(jf),ictemp, imjm,
439	c $ file_unit_field(jf), ierror)
440	IF (jf.eq.6)
441	$ CALL locwrite(cl_writ(jf),evice, imjm,
442	$ file_unit_field(jf), ierror)
443	IF (jf.eq.7)
444	$ CALL locwrite(cl_writ(jf),evwat, imjm,
445	$ file_unit_field(jf), ierror)
446	IF (jf.eq.8)
447	$ CALL locwrite(cl_writ(jf),lpre, imjm,
448	$ file_unit_field(jf), ierror)
449	IF (jf.eq.9)
450	$ CALL locwrite(cl_writ(jf),spre, imjm,
451	$ file_unit_field(jf), ierror)
452	IF (jf.eq.10)
453	$ CALL locwrite(cl_writ(jf),dirunoff, imjm,
454	$ file_unit_field(jf), ierror)
455	IF (jf.eq.11)
456	$ CALL locwrite(cl_writ(jf),rivrunoff, imjm,
457	$ file_unit_field(jf), ierror)
458	IF (jf.eq.12)
459	$ CALL locwrite(cl_writ(jf),calving, imjm,
460	$ file_unit_field(jf), ierror)
461	c$$$ IF (jf.eq.13)
462	c$$$ $ CALL locwrite(cl_writ(jf),tauxu, imjm,
463	c$$$ $ file_unit_field(jf),ierror)
464	c$$$ IF (jf.eq.1')
465	c$$$ $ CALL locwrite(cl_writ(jf),tauxv, imjm,
466	c$$$ $ file_unit_field(jf),ierror)
467	c$$$ IF (jf.eq.15)
468	c$$$ $ CALL locwrite(cl_writ(jf),tauyv, imjm,
469	c$$$ $ file_unit_field(jf),ierror)
470	c$$$ IF (jf.eq.16)
471	c$$$ $ CALL locwrite(cl_writ(jf),tauyu, imjm,
472	c$$$ $ file_unit_field(jf), ierror)
473	IF (jf.eq.13)
474	$ CALL locwrite(cl_writ(jf),tauxx_u, imjm,
475	$ file_unit_field(jf),ierror)
476	IF (jf.eq.14)
477	$ CALL locwrite(cl_writ(jf),tauyy_u, imjm,
478	$ file_unit_field(jf),ierror)
479	IF (jf.eq.15)
480	$ CALL locwrite(cl_writ(jf),tauzz_u, imjm,
481	$ file_unit_field(jf),ierror)
482	IF (jf.eq.16)
483	$ CALL locwrite(cl_writ(jf),tauxx_v, imjm,
484	$ file_unit_field(jf),ierror)
485	IF (jf.eq.17)
486	$ CALL locwrite(cl_writ(jf),tauyy_v, imjm,
487	$ file_unit_field(jf),ierror)
488	IF (jf.eq.18)
489	$ CALL locwrite(cl_writ(jf),tauzz_v, imjm,
490	$ file_unit_field(jf),ierror)
491	END DO
492	C
493	C -simulate a FLUSH
494	C
495	DO jn=1, max_file
496	CLOSE (file_unit(jn))
497	END DO
498	C
499	C
500	IF(cchan.eq.'CLIM') THEN
501	C
502	C -inform PVM daemon that message exchange is finished
503	C
504	CALL CLIM_Quit (CLIM_ContPvm, info)
505	IF (info .NE. CLIM_Ok) THEN
506	WRITE (6, *)
507	$ 'An error occured while leaving CLIM. Error = ',
508	$ info
509	ENDIF
510	END IF
511	RETURN
512	END IF
513	C
514	IF(cchan.eq.'CLIM') THEN
515	C
516	C -Give atmospheric fields to Oasis
517	C
518	DO jn=1, jpflda2o1 + jpflda2o2
519	C
520	IF (jn.eq.1) CALL CLIM_Export(cl_writ(jn), kt, fsolice, info)
521	IF (jn.eq.2) CALL CLIM_Export(cl_writ(jn), kt, fsolwat, info)
522	IF (jn.eq.3) CALL CLIM_Export(cl_writ(jn), kt, fnsolice, info)
523	IF (jn.eq.4) CALL CLIM_Export(cl_writ(jn), kt, fnsolwat, info)
524	IF (jn.eq.5) CALL CLIM_Export(cl_writ(jn), kt, fnsicedt, info)
525	c IF (jn.eq.6) CALL CLIM_Export(cl_writ(jn), kt, ictemp, info)
526	IF (jn.eq.6) CALL CLIM_Export(cl_writ(jn), kt, evice, info)
527	IF (jn.eq.7) CALL CLIM_Export(cl_writ(jn), kt, evwat, info)
528	IF (jn.eq.8) CALL CLIM_Export(cl_writ(jn), kt, lpre, info)
529	IF (jn.eq.9) CALL CLIM_Export(cl_writ(jn), kt, spre, info)
530	IF (jn.eq.10) CALL CLIM_Export(cl_writ(jn),kt,dirunoff, info)
531	IF (jn.eq.11) CALL CLIM_Export(cl_writ(jn),kt,rivrunoff,info)
532	IF (jn.eq.12) CALL CLIM_Export(cl_writ(jn),kt,calving,info)
533	c$$$ IF (jn.eq.13) CALL CLIM_Export(cl_writ(jn), kt, tauxu, info)
534	c$$$ IF (jn.eq.14) CALL CLIM_Export(cl_writ(jn), kt, tauxv, info)
535	c$$$ IF (jn.eq.15) CALL CLIM_Export(cl_writ(jn), kt, tauyv, info)
536	c$$$ IF (jn.eq.16) CALL CLIM_Export(cl_writ(jn), kt, tauyu, info)
537	IF (jn.eq.13) CALL CLIM_Export(cl_writ(jn), kt, tauxx_u, info)
538	IF (jn.eq.14) CALL CLIM_Export(cl_writ(jn), kt, tauyy_u, info)
539	IF (jn.eq.15) CALL CLIM_Export(cl_writ(jn), kt, tauzz_u, info)
540	IF (jn.eq.16) CALL CLIM_Export(cl_writ(jn), kt, tauxx_v, info)
541	IF (jn.eq.17) CALL CLIM_Export(cl_writ(jn), kt, tauyy_v, info)
542	IF (jn.eq.18) CALL CLIM_Export(cl_writ(jn), kt, tauzz_v, info)
543
544	IF (info .NE. CLIM_Ok) THEN
545	WRITE (nuout,*) 'STEP : Pb giving ',cl_writ(jn), ':',jn
546	WRITE (nuout,*) ' at timestep = ', icstep,'kt = ',kt
547	WRITE (nuout,*) 'Clim error code is = ',info
548	CALL halte('STOP in intocpl ')
549	ENDIF
550	END DO
551	ENDIF
552	C
553	RETURN
554	END
555
556	SUBROUTINE pipe_model_define
557	print*,'Attention dans oasis.F, pipe_model_define est non defini'
558	RETURN
559	END
560
561	SUBROUTINE pipe_model_stepi
562	print*,'Attention dans oasis.F, pipe_model_stepi est non defini'
563	RETURN
564	END
565
566	SUBROUTINE pipe_model_recv
567	print *, 'Attention dans oasis.F, pipe_model_recv est non defini'
568	RETURN
569	END
570
571	SUBROUTINE pipe_model_send
572	print *, 'Attention dans oasis.F, pipe_model_send est non defini'
573	RETURN
574	END
575
576	SUBROUTINE quitcpl
577	print *, 'Attention dans oasis.F, quitcpl est non defini'
578	RETURN
579	END
580
581	SUBROUTINE sipc_write_model
582	print *, 'Attention dans oasis.F, sipc_write_model est non defini'
583	RETURN
584	END
585
586	SUBROUTINE sipc_attach
587	print *, 'Attention dans oasis.F, sipc_attach est non defini'
588	RETURN
589	END
590
591	SUBROUTINE sipc_init_model
592	print *, 'Attention dans oasis.F, sipc_init_model est non defini'
593	RETURN
594	END
595
596	SUBROUTINE sipc_read_model
597	print *, 'Attention dans oasis.F, sipc_read_model est non defini'
598	RETURN
599	END

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format