source: BOL/LMDZ_Setup/DEF/orchidee.def_6.2work_orig @ 5424

Last change on this file since 5424 was 4615, checked in by asima, 18 months ago

Initial import of LMDZ_Setup environment
(former TEST_PROD which was distributed as tutorial_prod.tar).

See also related doc LMDZ_Setup_HowTo (former tutorial_prod_FAQ) :
https://docs.google.com/document/d/1OLZG6e-86NiXuv5-aALxKIh-QPkp4BdCwWtiBFot-6c

This initial import corresponds to TEST_PROD from
https://lmdz.lmd.jussieu.fr/pub/Training/Archive/tutorial_prod.tar_v20230707.

Previous versions of tutorial_prod.tar are available at
https://lmdz.lmd.jussieu.fr/pub/Training/Archive

File size: 7.6 KB
Line 
1# ASima : fichier copie de :
2#    /gpfswork/rech/gzi/rdzt896/LMDZOR6.2.work/modipsl/config/LMDZOR_v6/GENERAL/PARAM/orchidee.def
3#
4#**************************************************************************
5#                    Parameter file list for ORCHIDEE
6# See all optional parameters in modipsl/modeles/ORCHIDEE/orchidee.default
7#**************************************************************************
8
9# Input and output
10#**************************************************************************
11# Restart the time from the GCM.
12# default = n
13SECHIBA_reset_time = y
14
15# Name of restart to read for initial conditions
16# default = NONE
17SECHIBA_restart_in = _AUTOBLOCKER_
18
19# Name of restart to read for initial conditions of STOMATE
20# default = NONE
21STOMATE_RESTART_FILEIN = _AUTOBLOCKER_
22
23# Use XIOS for writing diagnostics file
24# default = y
25XIOS_ORCHIDEE_OK = y
26
27# Writefrequency in seconds in sechiba_history.nc
28# default = 0
29WRITE_STEP = 0
30
31# Print level for text output in out_orchidee_*
32# PRINTLEV = 1 : some output in initialization phase
33# PRINTLEV = 2 : more output in initialization phase and printing of new date
34# PRINTLEV = 3, 4,.. : more output also at each timestep
35PRINTLEV=1
36
37# Hydrology parameters
38#**************************************************************************
39# Activate the multi-layer diffusion scheme adapted from CWRR
40# default = y
41HYDROL_CWRR = y
42
43# Activate river routing
44# default = y
45RIVER_ROUTING = _AUTO_
46
47# Choice of routing method: standard or simple
48ROUTING_METHOD = _AUTO_
49
50# Activate creation of river_desc.nc file
51# RIVER_DESC will be activated only the first execution in the simulation.
52RIVER_DESC = _AUTO_
53
54# SOILTYPE_CLASSIF :  Type of classification used for the map of soil types (default zobler)
55SOILTYPE_CLASSIF = zobler
56SOILALB_FILE     = soils_param.nc
57SOILCLASS_FILE   = soils_param.nc
58
59# DO_RSOIL : Reduce soil evaporation with a soil resistance (default n)
60DO_RSOIL = n
61
62# To make AVAN and NVAN constant with depth (default CWRR_AKS_A0=0, CWRR_AKS_POWER=0, CWRR_NKS_A0=0, CWRR_NKS_POWER=0 )
63CWRR_AKS_A0 = 0.
64CWRR_AKS_POWER = 0.
65CWRR_NKS_A0 = 0.
66CWRR_NKS_POWER = 0.
67
68#**************************************************************************
69# Activate Stomate component
70STOMATE_OK_STOMATE = _AUTOBLOCKER_
71
72# Activate calculations of CO2 according to Farqhuar and Ball
73# default = y
74STOMATE_OK_CO2 = y
75
76# CDRAG_from_GCM: Use cdrag coefficient from gcm (default=y if coupled to LMDZ)
77CDRAG_from_GCM = y
78
79# Interception reservoir coefficient.
80# default = 0.1
81SECHIBA_QSINT = 0.02
82
83# Use 15 PFTs. Note that PFTmap.nc must contains 15PFTs.
84# PFT=10, 14 and 15 share the same parametrization except for VCMAX and LAI_MAX specified below. 
85NVM=15
86PFT_TO_MTC=1,2,3,4,5,6,7,8,9,10,11,12,13,10,10
87PFT_NAME__10='temperate C3           grass      '
88PFT_NAME__14='tropical  C3           grass      '
89PFT_NAME__15='boreal    C3           grass      '
90
91# STRESS_GS, STRESS_GM, STRESS_VCMAX : Stress on GS, GM and VCMAX
92# Default STRESS_GS=1, STRESS_GM=1, STRESS_VCMAX=1 for all PFTs
93STRESS_GS=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
94STRESS_GM=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
95STRESS_VCMAX=1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.
96
97# Optimized parameters for albedo (default values)
98ALB_LEAF_NIR = 0.,0.23,0.18,0.18,0.20,0.24,0.15,0.26,0.20,0.24,0.27,0.28,0.26,0.24,0.24
99ALB_LEAF_VIS = 0.,0.04,0.04,0.04,0.04,0.03,0.03,0.03,0.03,0.06,0.06,0.06,0.06,0.06,0.06
100SNOWA_AGED_NIR = 0.50,0,0,0.10,0.37,0.08,0.16,0.17,0.27,0.44,0.44,0.44,0.44,0.44,0.44
101SNOWA_DEC_NIR = 0.13,0,0,0.10,0.10,0.16,0.04,0.07,0.08,0.12,0.12,0.12,0.12,0.12,0.12
102SNOWA_AGED_VIS = 0.74,0,0,0.08,0.24,0.07,0.18,0.18,0.33,0.57,0.57,0.57,0.57,0.57,0.57
103SNOWA_DEC_VIS = 0.21,0,0,0.14,0.08,0.17,0.05,0.06,0.09,0.15,0.15,0.15,0.15,0.15,0.15
104
105# Optimized parameters for photosynthetic capacity
106# Default values except for PFT=15
107VCMAX25__02 = 45.0
108VCMAX25__03 = 45.0
109VCMAX25__04 = 35.0
110VCMAX25__05 = 40.0
111VCMAX25__06 = 50.0
112VCMAX25__07 = 45.0
113VCMAX25__08 = 35.0
114VCMAX25__09 = 35.0
115VCMAX25__10 = 50.0
116VCMAX25__11 = 50.0
117VCMAX25__12 = 60.0
118VCMAX25__13 = 60.0
119VCMAX25__14 = 50.0
120VCMAX25__15 = 40.0
121
122# Optimized parameters for LAI
123# Default values except for PFT=15
124LAI_MAX__02 = 7.0
125LAI_MAX__03 = 5.0
126LAI_MAX__04 = 5.0
127LAI_MAX__05 = 4.0
128LAI_MAX__06 = 5.0
129LAI_MAX__07 = 3.5
130LAI_MAX__08 = 4.0
131LAI_MAX__09 = 3.0
132LAI_MAX__10 = 2.5
133LAI_MAX__11 = 2.0
134LAI_MAX__12 = 5.0
135LAI_MAX__13 = 5.0
136LAI_MAX__14 = 2.5
137LAI_MAX__15 = 2.0
138
139# Activate downregulation for CO2
140# Set DOWNREGULATION_CO2_NEW=y to activate new revised version of
141# downregulation parametrization available in ORCHIDEE_2_0 for
142# configurations v6.1.11 or later or in ORCHIDEE_2_2 from revision 6393 and later.
143# When DOWNREGULATION_CO2_NEW=y,
144# DOWNREGULATION_CO2 will be forced to false by the model.
145DOWNREGULATION_CO2_NEW=y
146DOWNREGULATION_CO2_BASELEVEL=380.
147
148# Activate harvest of wood
149DO_WOOD_HARVEST=_AUTO_ : DEFAULT=y
150
151# Growth respiration (default values except for PFT=14 and PFT=15)
152FRAC_GROWTHRESP__02 = 0.35
153FRAC_GROWTHRESP__03 = 0.35
154FRAC_GROWTHRESP__04 = 0.28
155FRAC_GROWTHRESP__05 = 0.28
156FRAC_GROWTHRESP__06 = 0.28
157FRAC_GROWTHRESP__07 = 0.35
158FRAC_GROWTHRESP__08 = 0.35
159FRAC_GROWTHRESP__09 = 0.35
160FRAC_GROWTHRESP__10 = 0.28
161FRAC_GROWTHRESP__11 = 0.28
162FRAC_GROWTHRESP__12 = 0.28
163FRAC_GROWTHRESP__13 = 0.28
164FRAC_GROWTHRESP__14 = 0.35
165FRAC_GROWTHRESP__15 = 0.35
166
167# Maintenance respiration slope C (default values except for PFT=14 and PFT=15)
168MAINT_RESP_SLOPE_C__02 = 0.12
169MAINT_RESP_SLOPE_C__03 = 0.12
170MAINT_RESP_SLOPE_C__04 = 0.16
171MAINT_RESP_SLOPE_C__05 = 0.16
172MAINT_RESP_SLOPE_C__06 = 0.16
173MAINT_RESP_SLOPE_C__07 = 0.25
174MAINT_RESP_SLOPE_C__08 = 0.25
175MAINT_RESP_SLOPE_C__09 = 0.25
176MAINT_RESP_SLOPE_C__10 = 0.16
177MAINT_RESP_SLOPE_C__11 = 0.12
178MAINT_RESP_SLOPE_C__12 = 0.16
179MAINT_RESP_SLOPE_C__13 = 0.12
180MAINT_RESP_SLOPE_C__14 = 0.12
181MAINT_RESP_SLOPE_C__15 = 0.25
182
183# Soil turnover (default CARBON_TAU=7, CARBON_TAU_IPASSOVE=300)
184CARBON_TAU_ISLOW = 7
185CARBON_TAU_IPASSIVE = 300
186
187# Take carbon from atmosphere if carbohydrate reserve too small, PFT dependent
188# Set to y for all pft except C4 grass (pft=11) and tropical C3 grass (pft=14)
189ALWAYS_INIT =  y, y, y, y, y, y, y, y, y, y, n, y, y, n, y
190
191# Do not use default fire module
192# Default FIRE_DISABLE=y
193FIRE_DISABLE = y
194
195# Parameters related to vegetation map
196#**************************************************************************
197# Update vegetation frequency
198# The maximum vegetation fractions will be update at this period
199# default = 1Y
200VEGET_UPDATE = _AUTO_
201
202# Read lai map (default n)
203LAI_MAP = _AUTO_ : DEFAULT = n
204
205# Parameters related to surface and thermal physical properties
206#************************************************************************
207# Read bare soil albedo from file with background MODIS data
208# Default ALB_BG_MODIS=y
209ALB_BG_MODIS = y
210ALB_BG_FILE  = alb_bg.nc
211
212# ROUGH_DYN : Account for a dynamic roughness height (activation of Su et al. parametrization) (default y)
213ROUGH_DYN=y
214
215# OK_FREEZE :  Activate the complet soil freezing scheme (default y)
216OK_FREEZE=y
217
218# DEPTH_MAX_T (m) :  Maximum depth of the soil thermodynamics (default 90)
219DEPTH_MAX_T=90
220
221# OK_EXPLICITSNOW :  Activate explict snow scheme (default y)
222OK_EXPLICITSNOW=y
223 
224# READ_REFTEMP :  Initialize soil temperature using climatological temperature (default y if OK_FREEZE=y)
225READ_REFTEMP=y
226
227# Parameters related to chemistry bvoc
228#************************************************************************
229# CHEMISTRY_OK_BVOC :  Activate chemistry
230CHEMISTRY_BVOC = _AUTO_: DEFAULT=n
231
232# CO2 FOR BVOC - WILKINSON :  CO2 inhibition effect for isoprene based on Wilkinson approach?
233CO2_FOR_BVOC_WILKINSON=n
234
235# CO2 FOR BVOC - POSSELL :  CO2 inhibition effect for isoprene based on Possell approach?
236CO2_FOR_BVOC_POSSELL=n
237
Note: See TracBrowser for help on using the repository browser.