source: BOL/LMDZ_Setup/DEF/config.def_aer @ 5426

Last change on this file since 5426 was 4615, checked in by asima, 18 months ago

Initial import of LMDZ_Setup environment
(former TEST_PROD which was distributed as tutorial_prod.tar).

See also related doc LMDZ_Setup_HowTo (former tutorial_prod_FAQ) :
https://docs.google.com/document/d/1OLZG6e-86NiXuv5-aALxKIh-QPkp4BdCwWtiBFot-6c

This initial import corresponds to TEST_PROD from
https://lmdz.lmd.jussieu.fr/pub/Training/Archive/tutorial_prod.tar_v20230707.

Previous versions of tutorial_prod.tar are available at
https://lmdz.lmd.jussieu.fr/pub/Training/Archive

File size: 7.1 KB
RevLine 
[4615]1##############################################################################
2# PARAMETRES ET CLES DE CONFIGURATION LMDZ
3##############################################################################
4# D: Valeur par default
5#
6# Controle des sorties
7#*********************
8OK_journe=y
9OK_mensuel=y
10ok_hf=n
11OK_instan=n
12#ok_regdyn : y/n calcul/non des regymes dynamiques sur regions pre-definies
13ok_regdyn=n
14# - ok_histNMC = y/n, y/n, y/n pour avoir les sorties NMC mensuelles, journalieres et haute frequence
15ok_histNMC = n, n, n
16#lev_histdayNMC: nombre de niveaux sur la verticale dans le fichier
17#                histdayNMC: 8 ou 17
18lev_histdayNMC=8
19# A transformer en la ligne ci-dessous quand ce sera compatible avec libIGCM
20phys_out_regfkey=n       n       n       n       n      n
21phys_out_filekeys=         y       y       n       n       n      n   
22phys_out_filenames=      histmth histday histhf  histhf2h histLES histstn
23phys_out_filelevels=     5      5       4       0       1
24phys_out_filetypes=      ave(X)  ave(X)  ave(X) ave(X) ave(X) inst(X)
25phys_out_filetimesteps= 30day 1day 1hr 6hr 6hr
26flag_z0m_oce = 1, 1, 1, 0, 1
27flag_z0h_oce = 1, 1, 1, 0, 1
28flag_z0m_ter = 1, 1, 1, 0, 1
29flag_z0h_ter = 1, 1, 1, 0, 1
30flag_z0m_sic = 1, 1, 1, 0, 1
31flag_z0h_sic = 1, 1, 1, 0, 1
32flag_z0m_lic = 1, 1, 1, 0, 1
33flag_z0h_lic = 1, 1, 1, 0, 1
34flag_cdrh = 1, 1, 1, 0, 1
35flag_cdrm = 1, 1, 1, 0, 1
36flag_pourc_oce = 1, 1, 1, 0, 1
37flag_taux = 1, 1, 1, 0, 1
38flag_tauy = 1, 1, 1, 0, 1
39flag_t2m = 1, 1, 1, 0, 1
40flag_u10m = 1, 1, 1, 0, 1 
41flag_v10m = 1, 1, 1, 0, 1
42flag_flat = 5, 1, 10, 0, 1
43flag_sens = 1, 1, 10, 0, 1
44flag_topl = 1, 1, 10, 0, 1
45flag_pluc = 1, 1, 1, 0, 1
46flag_plul = 1, 1, 1, 0, 1
47flag_precip = 1, 1, 1, 0, 1
48flag_cape = 1, 10, 10, 0, 1
49flag_cin = 1, 1, 1, 0, 1
50flag_fbase = 1, 10, 10, 0, 1
51flag_ale_wk = 1, 1, 1, 0, 1
52flag_ale_bl = 1, 1, 1, 0, 1
53flag_alp_wk = 1, 1, 1, 0, 1
54flag_ale = 1, 1, 1, 0, 1
55flag_alp = 1, 1, 1, 0, 1
56flag_alp_bl = 1, 1, 1, 0, 1
57flag_dtphy = 2, 10, 10, 0, 1
58flag_dqphy = 2, 10, 10, 0, 1
59
60flag_temp = 2, 3, 10, 0, 1
61flag_ovap = 2, 3, 10, 0, 1
62flag_rhum = 2, 1, 10, 0, 1
63flag_dtthe = 2, 10, 10, 0, 1
64flag_dtcon = 2, 10, 10, 0, 1
65flag_dtwak = 2, 10, 10, 0, 1
66flag_dqthe = 2, 10, 10, 0, 1
67flag_dqcon = 2, 10, 10, 0, 1
68flag_dqwak = 2, 10, 10, 0, 1
69
70flag_cldm = 1, 1, 10, 0, 10
71flag_cldl = 1, 1, 10, 0, 10
72flag_cldh = 1, 1, 10, 0, 10
73flag_tops = 1, 1, 10, 0, 10
74flag_tops0 = 1, 1, 10, 0, 10
75flag_topl0 = 1, 1, 10, 0, 10
76flag_sols = 1, 1, 10, 0, 10
77flag_sols0 = 1, 1, 10, 0, 10
78flag_soll = 1, 1, 10, 0, 10
79flag_soll0 = 1, 1, 10, 0, 10
80flag_tsol = 1, 1, 10, 0, 10
81
82flag_s2 = 1, 1, 10, 0, 10
83
84flag_n2 = 1, 1, 10, 0, 10
85flag_zmax_th = 1, 1, 10, 0, 10
86flag_zlcl_th = 1, 1, 10, 0, 10
87flag_ale_bl_stat = 1, 1, 10, 0, 10
88falg_e_bl_trig = 1, 1, 10, 0, 10
89flag_pg_roba_notrig = 1, 1, 10, 0, 10
90
91# Sorties pour Marine
92flag_cldemi = 1, 1, 10, 10, 10
93flag_iwcon = 1, 1, 10, 10, 10
94flag_rneb  = 1, 1, 10, 10, 10
95flag_ref_ice = 1, 1, 10, 10, 10
96
97# Sandrine
98flag_w500 = 1, 1, 10, 10, 10
99flag_u850 = 1, 1, 10, 10, 10
100flag_v850 = 1, 1, 10, 10, 10
101flag_t850 = 1, 1, 10, 10, 10
102flag_u300 = 1, 1, 10, 10, 10
103flag_v300 = 1, 1, 10, 10, 10
104flag_t300 = 1, 1, 10, 10, 10
105flag_u500 = 1, 1, 10, 10, 10
106flag_v500 = 1, 1, 10, 10, 10
107flag_t500 = 1, 1, 10, 10, 10
108flag_u200 = 1, 1, 10, 10, 10
109flag_v200 = 1, 1, 10, 10, 10
110flag_t200 = 1, 1, 10, 10, 10
111
112
113flag_re = 1, 10, 10, 10, 10
114flag_fl = 1, 10, 10, 10, 10
115flag_scdnc = 1, 10, 10, 10, 10
116flag_reffclws = 1, 10, 10, 10, 10
117flag_reffclwc = 1, 10, 10, 10, 10
118flag_lcc = 1, 10, 10, 10, 10
119flag_lcc3d = 1, 10, 10, 10, 10
120flag_lcc3dcon = 1, 10, 10, 10, 10
121flag_lcc3dstra = 1, 10, 10, 10, 10
122flag_reffclwtop = 1, 10, 10, 10, 10
123flag_cldnvi = 1, 10, 10, 10, 10
124
125#
126#Couplage avec autres modules
127#******************************
128#option de couplage pour ocean (D:force)
129type_ocean=force
130version_ocean=nemo
131#avec ou sans orchidee (D:n)
132VEGET=y
133#type_run=AMIP, ENSP, clim (D:AMIP)
134type_run=CLIM
135##  Soil Model  ou non               
136soil_model=y
137
138#Code de transfert radiatif
139#**************************
140# ajout de ce flag pour activer/desactiver le rayonnement (MPL)
141# 0 : pas de rayonnement. 1: on active le rayonnement (D=1)
142iflag_radia=1
143## Nombre appels des routines de rayonnements ( par jour)                 
144nbapp_rad=16
145
146# Parametres "orbitaux/ ere geologique"
147#######################################
148#Parametres orbitaux
149#excentricite
150### R_ecc =      Excentricite
151R_ecc = 0.016715
152### R_peri =     Equinoxe
153R_peri = 102.7
154### R_incl =     Inclinaison
155R_incl = 23.441
156### solaire =    Constante solaire
157solaire = 1361.20
158### constante solaire lue dans un fichier par defaut
159ok_suntime_rrtm=n
160
161
162
163
164
165##  Facteur additif pour l albedo
166pmagic=0.008
167#
168# Taux gaz a effet de serre
169#######################################
170#concentration des gaz (co2 ch4   n2o  cfc11 cfc12)
171#                  (D: 348. 1650. 306.  280.  484.)
172### co2_ppm =    taux CO2 en ppm
173co2_ppm = 0.36886500E+03
174### CH4_ppb =    taux CH4 en ppb
175CH4_ppb = 0.17510225E+04
176### N2O_ppb =    taux N2O en ppb
177N2O_ppb = 0.31585000E+03
178### CFC11_ppt =  taux CFC11eq CMIP6 en ppt
179CFC11_ppt = 6.3990e+01
180### CFC12_ppt =  taux CFC12eq CMIP6  en ppt
181CFC12_ppt = 1.0511e+03
182
183#
184# Parametres effets directs/indirects des "aerosols"
185#######################################
186### ok_alw      flag for aerosol LW effect
187ok_alw=y
188ok_cdnc=y
189### ok_ade=y/n   flag Aerosol direct effect
190ok_ade=y
191### ok_aie=y/n   flag Aerosol indirect effect
192ok_aie=y
193### aer_type =   Aerosol variation type : actuel / preind / scenario / annuel
194aer_type=actuel
195###  type of coupled aerosol =1 (default) =2 => bc  only =3 => pom only =4 => seasalt only =5 => dust only =6 => all aerosol
196flag_aerosol=6
197flag_aerosol_strat=0
198#
199# Parametre de lecture de l'ozone
200#######################################
201# Allowed values are 0, 1 and 2
202# 0: do not read an ozone climatology
203# 1: read a single ozone climatology that will be used day and night
204# 2: read two ozone climatologies, the average day and night climatology and the daylight climatology
205read_climoz=0
206#
207# Parametres simulateur COSP (CFMIP Observational Simulator Package)
208#######################################
209### ok_cosp=y/n flag simulateur COSP
210ok_cosp=y
211### freq_COSP = frequence d'appel de COSP en secondes
212freq_COSP=10800.
213cles_dbze94=n n n
214### ok_mensuelCOSP=y/n sortir fichier mensuel COSP histmthCOSP.nc, =n pas de fichier histmthCOSP.nc
215ok_mensuelCOSP=y
216### ok_journeCOSP=y/n sortir fichier journalier histdayCOSP.nc, =n pas de fichier histdayCOSP.nc
217ok_journeCOSP=n
218### ok_hfCOSP=y/n, ecrire sorties  haute frequence histhfCOSP.nc, =n pas de fichier histhfCOSP.nc
219ok_hfCOSP=n
220#
221# Parametres simulateur ISCCP
222#######################################
223### ok_isccp=y/n flag simulateur ISCCP
224ok_isccp=n
225### top_height = flag choix calcul nuages par le simulateur en utilisant
226# -              les donnees IR et/ou VIS et l algorithme ISCCP-D1
227# - top_height = 1 -> algo IR-VIS
228# - top_height = 2 -> identique a 1, mais "ptop(ibox)=pfull(ilev)"
229# - top_height = 3 -> algo IR
230top_height = 1
231### overlap =    Hypothese de Recouvrement (HR) utilisee pour le simulateur ISCCP
232# - overlap=1    Max overlap
233# - overlap=2    Random overlap
234# - overlap=3    Max/Random overlap
235overlap = 3
236#
237
238# XIOS outputs : ok_all_xml=y
239#######################################
240ok_all_xml=n
Note: See TracBrowser for help on using the repository browser.