! ! $Id: surf_ocean_mod.F90 2719 2016-11-29 21:56:32Z aclsce $ ! MODULE surf_ocean_mod IMPLICIT NONE CONTAINS ! !****************************************************************************** ! SUBROUTINE surf_ocean(rlon, rlat, swnet, lwnet, alb1, & windsp, rmu0, fder, tsurf_in, & itime, dtime, jour, knon, knindex, & p1lay, z1lay, cdragh, cdragm, precip_rain, precip_snow, temp_air, spechum, & AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, rugoro, pctsrf, & snow, qsurf, agesno, & z0m, z0h, SFRWL, alb_dir_new, alb_dif_new, evap, fluxsens, fluxlat, & tsurf_new, dflux_s, dflux_l, lmt_bils, & flux_u1, flux_v1) use albedo, only: alboc, alboc_cd USE dimphy, ONLY: klon, zmasq USE surface_data, ONLY : type_ocean USE ocean_forced_mod, ONLY : ocean_forced_noice USE ocean_slab_mod, ONLY : ocean_slab_noice USE ocean_cpl_mod, ONLY : ocean_cpl_noice USE indice_sol_mod, ONLY : nbsrf, is_oce ! ! This subroutine will make a call to ocean_XXX_noice according to the ocean mode (force, ! slab or couple). The calculations of albedo and rugosity for the ocean surface are ! done in here because they are identical for the different modes of ocean. INCLUDE "YOMCST.h" include "clesphys.h" ! for cycle_diurne and for iflag_z0_oce==-1 (prescribed z0) ! Input variables !****************************************************************************** INTEGER, INTENT(IN) :: itime, jour, knon INTEGER, DIMENSION(klon), INTENT(IN) :: knindex REAL, INTENT(IN) :: dtime REAL, DIMENSION(klon), INTENT(IN) :: rlon, rlat REAL, DIMENSION(klon), INTENT(IN) :: swnet ! net shortwave radiation at surface REAL, DIMENSION(klon), INTENT(IN) :: lwnet ! net longwave radiation at surface REAL, DIMENSION(klon), INTENT(IN) :: alb1 ! albedo in visible SW interval REAL, DIMENSION(klon), INTENT(IN) :: windsp REAL, DIMENSION(klon), INTENT(IN) :: rmu0 REAL, DIMENSION(klon), INTENT(IN) :: fder REAL, DIMENSION(klon), INTENT(IN) :: tsurf_in REAL, DIMENSION(klon), INTENT(IN) :: p1lay,z1lay ! pression (Pa) et altitude (m) du premier niveau REAL, DIMENSION(klon), INTENT(IN) :: cdragh REAL, DIMENSION(klon), INTENT(IN) :: cdragm REAL, DIMENSION(klon), INTENT(IN) :: precip_rain, precip_snow REAL, DIMENSION(klon), INTENT(IN) :: temp_air, spechum REAL, DIMENSION(klon), INTENT(IN) :: AcoefH, AcoefQ, BcoefH, BcoefQ REAL, DIMENSION(klon), INTENT(IN) :: AcoefU, AcoefV, BcoefU, BcoefV REAL, DIMENSION(klon), INTENT(IN) :: ps REAL, DIMENSION(klon), INTENT(IN) :: u1, v1, gustiness REAL, DIMENSION(klon), INTENT(IN) :: rugoro REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf ! In/Output variables !****************************************************************************** REAL, DIMENSION(klon), INTENT(INOUT) :: snow REAL, DIMENSION(klon), INTENT(INOUT) :: qsurf REAL, DIMENSION(klon), INTENT(INOUT) :: agesno ! Output variables !****************************************************************************** REAL, DIMENSION(klon), INTENT(OUT) :: z0m, z0h !albedo SB >>> ! REAL, DIMENSION(klon), INTENT(OUT) :: alb1_new ! new albedo in visible SW interval ! REAL, DIMENSION(klon), INTENT(OUT) :: alb2_new ! new albedo in near IR interval REAL, DIMENSION(6), INTENT(IN) :: SFRWL REAL, DIMENSION(klon,nsw), INTENT(OUT) :: alb_dir_new,alb_dif_new !albedo SB <<< REAL, DIMENSION(klon), INTENT(OUT) :: evap, fluxsens, fluxlat REAL, DIMENSION(klon), INTENT(OUT) :: tsurf_new REAL, DIMENSION(klon), INTENT(OUT) :: dflux_s, dflux_l REAL, DIMENSION(klon), INTENT(OUT) :: lmt_bils REAL, DIMENSION(klon), INTENT(OUT) :: flux_u1, flux_v1 ! Local variables !****************************************************************************** INTEGER :: i, k REAL :: tmp REAL, PARAMETER :: cepdu2=(0.1)**2 REAL, DIMENSION(klon) :: alb_eau REAL, DIMENSION(klon) :: radsol REAL, DIMENSION(klon) :: cdragq ! Cdrag pour l'evaporation CHARACTER(len=20),PARAMETER :: modname="surf_ocean" ! End definition !****************************************************************************** !****************************************************************************** ! Calculate total net radiance at surface ! !****************************************************************************** radsol(1:klon) = 0.0 ! initialisation a priori inutile radsol(1:knon) = swnet(1:knon) + lwnet(1:knon) !****************************************************************************** ! Cdragq computed from cdrag ! The difference comes only from a factor (f_z0qh_oce) on z0, so that ! it can be computed inside surf_ocean ! More complicated appraches may require the propagation through ! pbl_surface of an independant cdragq variable. !****************************************************************************** IF ( f_z0qh_oce .ne. 1.) THEN ! Si on suit les formulations par exemple de Tessel, on ! a z0h=0.4*nu/u*, z0q=0.62*nu/u*, d'ou f_z0qh_oce=0.62/0.4=1.55 cdragq(1:knon)=cdragh(1:knon)* & log(z1lay(1:knon)/z0h(1:knon))/log(z1lay(1:knon)/(f_z0qh_oce*z0h(1:knon))) ELSE cdragq(1:knon)=cdragh(1:knon) ENDIF !****************************************************************************** ! Switch according to type of ocean (couple, slab or forced) !****************************************************************************** SELECT CASE(type_ocean) CASE('couple') CALL ocean_cpl_noice( & swnet, lwnet, alb1, & windsp, fder, & itime, dtime, knon, knindex, & p1lay, cdragh, cdragq, cdragm, precip_rain, precip_snow,temp_air,spechum,& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, & radsol, snow, agesno, & qsurf, evap, fluxsens, fluxlat, flux_u1, flux_v1, & tsurf_new, dflux_s, dflux_l) CASE('slab') CALL ocean_slab_noice( & itime, dtime, jour, knon, knindex, & p1lay, cdragh, cdragq, cdragm, precip_rain, precip_snow, temp_air, spechum,& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, tsurf_in, & radsol, snow, & qsurf, evap, fluxsens, fluxlat, flux_u1, flux_v1, & tsurf_new, dflux_s, dflux_l, lmt_bils) CASE('force') CALL ocean_forced_noice( & itime, dtime, jour, knon, knindex, & p1lay, cdragh, cdragq, cdragm, precip_rain, precip_snow, & temp_air, spechum, & AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ps, u1, v1, gustiness, & radsol, snow, agesno, & qsurf, evap, fluxsens, fluxlat, flux_u1, flux_v1, & tsurf_new, dflux_s, dflux_l) END SELECT !****************************************************************************** ! fcodron: compute lmt_bils forced case (same as wfbils_oce / 1.-contfracatm) !****************************************************************************** IF (type_ocean.NE.'slab') THEN lmt_bils(1:klon)=0. DO i=1,knon lmt_bils(knindex(i))=(swnet(i)+lwnet(i)+fluxsens(i)+fluxlat(i)) & *pctsrf(knindex(i),is_oce)/(1.-zmasq(knindex(i))) END DO END IF !****************************************************************************** ! Calculate ocean surface albedo !****************************************************************************** !albedo SB >>> IF (iflag_albedo==0) THEN !--old parametrizations of ocean surface albedo ! IF (cycle_diurne) THEN ! CALL alboc_cd(rmu0,alb_eau) ! !--ad-hoc correction for model radiative balance tuning !--now outside alboc_cd routine alb_eau(1:klon) = fmagic*alb_eau(1:klon) + pmagic alb_eau(1:klon)=MIN(MAX(alb_eau(1:klon),0.0),1.0) ! ELSE ! CALL alboc(REAL(jour),rlat,alb_eau) !--ad-hoc correction for model radiative balance tuning !--now outside alboc routine alb_eau(1:klon) = fmagic*alb_eau(1:klon) + pmagic alb_eau(1:klon)=MIN(MAX(alb_eau(1:klon),0.04),0.60) ! ENDIF ! DO i =1, knon DO k=1,nsw alb_dir_new(i,k) = alb_eau(knindex(i)) ENDDO ENDDO !IM 09122015 next line corresponds to the old way of doing in LMDZ5A/IPSLCM5A versions !albedo for diffuse radiation is taken the same as for direct radiation alb_dif_new(1:knon,:)=alb_dir_new(1:knon,:) !IM 09122015 end ! ELSE IF (iflag_albedo==1) THEN !--new parametrization of ocean surface albedo by Sunghye Baek !--albedo for direct and diffuse radiation are different ! CALL ocean_albedo(knon,rmu0,knindex,windsp,SFRWL,alb_dir_new,alb_dif_new) ! !--ad-hoc correction for model radiative balance tuning alb_dir_new(1:knon,:) = fmagic*alb_dir_new(1:knon,:) + pmagic alb_dif_new(1:knon,:) = fmagic*alb_dif_new(1:knon,:) + pmagic alb_dir_new(1:knon,:)=MIN(MAX(alb_dir_new(1:knon,:),0.0),1.0) alb_dif_new(1:knon,:)=MIN(MAX(alb_dif_new(1:knon,:),0.0),1.0) ! ENDIF !albedo SB <<< !****************************************************************************** ! Calculate the rugosity !****************************************************************************** IF (iflag_z0_oce==0) THEN DO i = 1, knon tmp = MAX(cepdu2,gustiness(i)+u1(i)**2+v1(i)**2) z0m(i) = 0.018*cdragm(i) * (gustiness(i)+u1(i)**2+v1(i)**2)/RG & + 0.11*14e-6 / SQRT(cdragm(i) * tmp) z0m(i) = MAX(1.5e-05,z0m(i)) ENDDO z0h(1:knon)=z0m(1:knon) ! En attendant mieux ELSE IF (iflag_z0_oce==1) THEN DO i = 1, knon tmp = MAX(cepdu2,gustiness(i)+u1(i)**2+v1(i)**2) z0m(i) = 0.018*cdragm(i) * (gustiness(i)+u1(i)**2+v1(i)**2)/RG & + 0.11*14e-6 / SQRT(cdragm(i) * tmp) z0m(i) = MAX(1.5e-05,z0m(i)) z0h(i)=0.4*14e-6 / SQRT(cdragm(i) * tmp) ENDDO ELSE IF (iflag_z0_oce==-1) THEN DO i = 1, knon z0m(i) = z0min z0h(i) = z0min ENDDO ELSE CALL abort_physic(modname,'version non prevue',1) ENDIF ! !****************************************************************************** END SUBROUTINE surf_ocean !****************************************************************************** ! END MODULE surf_ocean_mod