! ! $Id: pbl_surface_mod.F90 2410 2015-12-16 08:10:00Z crio $ ! MODULE pbl_surface_mod ! ! Planetary Boundary Layer and Surface module ! ! This module manage the calculation of turbulent diffusion in the boundary layer ! and all interactions towards the differents sub-surfaces. ! ! USE dimphy USE mod_phys_lmdz_para, ONLY : mpi_size USE mod_grid_phy_lmdz, ONLY : klon_glo USE ioipsl USE surface_data, ONLY : type_ocean, ok_veget USE surf_land_mod, ONLY : surf_land USE surf_landice_mod, ONLY : surf_landice USE surf_ocean_mod, ONLY : surf_ocean USE surf_seaice_mod, ONLY : surf_seaice USE cpl_mod, ONLY : gath2cpl USE climb_hq_mod, ONLY : climb_hq_down, climb_hq_up USE climb_wind_mod, ONLY : climb_wind_down, climb_wind_up USE coef_diff_turb_mod, ONLY : coef_diff_turb IMPLICIT NONE ! Declaration of variables saved in restart file REAL, ALLOCATABLE, DIMENSION(:), PRIVATE, SAVE :: fder ! flux drift !$OMP THREADPRIVATE(fder) REAL, ALLOCATABLE, DIMENSION(:,:), PUBLIC, SAVE :: snow ! snow at surface !$OMP THREADPRIVATE(snow) REAL, ALLOCATABLE, DIMENSION(:,:), PRIVATE, SAVE :: qsurf ! humidity at surface !$OMP THREADPRIVATE(qsurf) REAL, ALLOCATABLE, DIMENSION(:,:,:), SAVE :: ftsoil ! soil temperature !$OMP THREADPRIVATE(ftsoil) CONTAINS ! !**************************************************************************************** ! SUBROUTINE pbl_surface_init(fder_rst, snow_rst, qsurf_rst, ftsoil_rst) ! This routine should be called after the restart file has been read. ! This routine initialize the restart variables and does some validation tests ! for the index of the different surfaces and tests the choice of type of ocean. USE indice_sol_mod USE print_control_mod, ONLY: lunout INCLUDE "dimsoil.h" ! Input variables !**************************************************************************************** REAL, DIMENSION(klon), INTENT(IN) :: fder_rst REAL, DIMENSION(klon, nbsrf), INTENT(IN) :: snow_rst REAL, DIMENSION(klon, nbsrf), INTENT(IN) :: qsurf_rst REAL, DIMENSION(klon, nsoilmx, nbsrf), INTENT(IN) :: ftsoil_rst ! Local variables !**************************************************************************************** INTEGER :: ierr CHARACTER(len=80) :: abort_message CHARACTER(len = 20) :: modname = 'pbl_surface_init' !**************************************************************************************** ! Allocate and initialize module variables with fields read from restart file. ! !**************************************************************************************** ALLOCATE(fder(klon), stat=ierr) IF (ierr /= 0) CALL abort_physic('pbl_surface_init', 'pb in allocation',1) ALLOCATE(snow(klon,nbsrf), stat=ierr) IF (ierr /= 0) CALL abort_physic('pbl_surface_init', 'pb in allocation',1) ALLOCATE(qsurf(klon,nbsrf), stat=ierr) IF (ierr /= 0) CALL abort_physic('pbl_surface_init', 'pb in allocation',1) ALLOCATE(ftsoil(klon,nsoilmx,nbsrf), stat=ierr) IF (ierr /= 0) CALL abort_physic('pbl_surface_init', 'pb in allocation',1) fder(:) = fder_rst(:) snow(:,:) = snow_rst(:,:) qsurf(:,:) = qsurf_rst(:,:) ftsoil(:,:,:) = ftsoil_rst(:,:,:) !**************************************************************************************** ! Test for sub-surface indices ! !**************************************************************************************** IF (is_ter /= 1) THEN WRITE(lunout,*)" *** Warning ***" WRITE(lunout,*)" is_ter n'est pas le premier surface, is_ter = ",is_ter WRITE(lunout,*)"or on doit commencer par les surfaces continentales" abort_message="voir ci-dessus" CALL abort_physic(modname,abort_message,1) ENDIF IF ( is_oce > is_sic ) THEN WRITE(lunout,*)' *** Warning ***' WRITE(lunout,*)' Pour des raisons de sequencement dans le code' WRITE(lunout,*)' l''ocean doit etre traite avant la banquise' WRITE(lunout,*)' or is_oce = ',is_oce, '> is_sic = ',is_sic abort_message='voir ci-dessus' CALL abort_physic(modname,abort_message,1) ENDIF IF ( is_lic > is_sic ) THEN WRITE(lunout,*)' *** Warning ***' WRITE(lunout,*)' Pour des raisons de sequencement dans le code' WRITE(lunout,*)' la glace contineltalle doit etre traite avant la glace de mer' WRITE(lunout,*)' or is_lic = ',is_lic, '> is_sic = ',is_sic abort_message='voir ci-dessus' CALL abort_physic(modname,abort_message,1) ENDIF !**************************************************************************************** ! Validation of ocean mode ! !**************************************************************************************** IF (type_ocean /= 'slab ' .AND. type_ocean /= 'force ' .AND. type_ocean /= 'couple') THEN WRITE(lunout,*)' *** Warning ***' WRITE(lunout,*)'Option couplage pour l''ocean = ', type_ocean abort_message='option pour l''ocean non valable' CALL abort_physic(modname,abort_message,1) ENDIF END SUBROUTINE pbl_surface_init ! !**************************************************************************************** ! SUBROUTINE pbl_surface( & dtime, date0, itap, jour, & debut, lafin, & rlon, rlat, rugoro, rmu0, & zsig, lwdown_m, pphi, cldt, & rain_f, snow_f, solsw_m, sollw_m, & gustiness, & t, q, u, v, & !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 !! t_x, q_x, t_w, q_w, & wake_dlt, wake_dlq, & wake_cstar, wake_s, & !!! pplay, paprs, pctsrf, & ts,SFRWL, alb_dir, alb_dif,ustar, u10m, v10m,wstar, & cdragh, cdragm, zu1, zv1, & alb_dir_m, alb_dif_m, zxsens, zxevap, & alb3_lic, runoff, snowhgt, qsnow, to_ice, sissnow, & zxtsol, zxfluxlat, zt2m, qsat2m, & d_t, d_q, d_u, d_v, d_t_diss, & !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 d_t_w, d_q_w, & d_t_x, d_q_x, & !! d_wake_dlt,d_wake_dlq, & zxsens_x, zxfluxlat_x,zxsens_w,zxfluxlat_w, & !!! !!! nrlmd le 13/06/2011 delta_tsurf,wake_dens,cdragh_x,cdragh_w, & cdragm_x,cdragm_w,kh,kh_x,kh_w, & !!! zcoefh, zcoefm, slab_wfbils, & qsol, zq2m, s_pblh, s_plcl, & !!! !!! jyg le 08/02/2012 s_pblh_x, s_plcl_x, s_pblh_w, s_plcl_w, & !!! s_capCL, s_oliqCL, s_cteiCL, s_pblT, & s_therm, s_trmb1, s_trmb2, s_trmb3, & zustar,zu10m, zv10m, fder_print, & zxqsurf, rh2m, zxfluxu, zxfluxv, & z0m, z0h, agesno, sollw, solsw, & d_ts, evap, fluxlat, t2m, & wfbils, wfbilo, flux_t, flux_u, flux_v,& dflux_t, dflux_q, zxsnow, & !jyg< !! zxfluxt, zxfluxq, q2m, flux_q, tke, & zxfluxt, zxfluxq, q2m, flux_q, tke_x, & !>jyg !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 !! tke_x, tke_w & wake_dltke & !!! ) !**************************************************************************************** ! Auteur(s) Z.X. Li (LMD/CNRS) date: 19930818 ! Objet: interface de "couche limite" (diffusion verticale) ! !AA REM: !AA----- !AA Tout ce qui a trait au traceurs est dans phytrac maintenant !AA pour l'instant le calcul de la couche limite pour les traceurs !AA se fait avec cltrac et ne tient pas compte de la differentiation !AA des sous-fraction de sol. !AA REM bis : !AA---------- !AA Pour pouvoir extraire les coefficient d'echanges et le vent !AA dans la premiere couche, 3 champs supplementaires ont ete crees !AA zcoefh, zu1 et zv1. Pour l'instant nous avons moyenne les valeurs !AA de ces trois champs sur les 4 subsurfaces du modele. Dans l'avenir !AA si les informations des subsurfaces doivent etre prises en compte !AA il faudra sortir ces memes champs en leur ajoutant une dimension, !AA c'est a dire nbsrf (nbre de subsurface). ! ! Arguments: ! ! dtime----input-R- interval du temps (secondes) ! itap-----input-I- numero du pas de temps ! date0----input-R- jour initial ! t--------input-R- temperature (K) ! q--------input-R- vapeur d'eau (kg/kg) ! u--------input-R- vitesse u ! v--------input-R- vitesse v ! wake_dlt-input-R- temperatre difference between (w) and (x) (K) ! wake_dlq-input-R- humidity difference between (w) and (x) (kg/kg) !wake_cstar-input-R- wake gust front speed (m/s) ! wake_s---input-R- wake fractionnal area ! ts-------input-R- temperature du sol (en Kelvin) ! paprs----input-R- pression a intercouche (Pa) ! pplay----input-R- pression au milieu de couche (Pa) ! rlat-----input-R- latitude en degree ! z0m, z0h ----input-R- longeur de rugosite (en m) ! Martin ! zsig-----input-R- slope ! cldt-----input-R- total cloud fraction ! pphi-----input-R- geopotentiel de chaque couche (g z) (reference sol) ! Martin ! ! d_t------output-R- le changement pour "t" ! d_q------output-R- le changement pour "q" ! d_u------output-R- le changement pour "u" ! d_v------output-R- le changement pour "v" ! d_ts-----output-R- le changement pour "ts" ! flux_t---output-R- flux de chaleur sensible (CpT) J/m**2/s (W/m**2) ! (orientation positive vers le bas) ! tke_x---input/output-R- tke in the (x) region (kg/m**2/s) ! wake_dltke-input/output-R- tke difference between (w) and (x) (kg/m**2/s) ! flux_q---output-R- flux de vapeur d'eau (kg/m**2/s) ! flux_u---output-R- tension du vent X: (kg m/s)/(m**2 s) ou Pascal ! flux_v---output-R- tension du vent Y: (kg m/s)/(m**2 s) ou Pascal ! dflux_t--output-R- derive du flux sensible ! dflux_q--output-R- derive du flux latent ! zu1------output-R- le vent dans la premiere couche ! zv1------output-R- le vent dans la premiere couche ! trmb1----output-R- deep_cape ! trmb2----output-R- inhibition ! trmb3----output-R- Point Omega ! cteiCL---output-R- Critere d'instab d'entrainmt des nuages de CL ! plcl-----output-R- Niveau de condensation ! pblh-----output-R- HCL ! pblT-----output-R- T au nveau HCL ! USE carbon_cycle_mod, ONLY : carbon_cycle_cpl, co2_send USE indice_sol_mod USE time_phylmdz_mod, ONLY: day_ini,annee_ref,itau_phy USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat USE print_control_mod, ONLY: prt_level,lunout IMPLICIT NONE INCLUDE "dimsoil.h" INCLUDE "YOMCST.h" INCLUDE "YOETHF.h" INCLUDE "FCTTRE.h" INCLUDE "clesphys.h" INCLUDE "compbl.h" INCLUDE "flux_arp.h" !**************************************************************************************** REAL, INTENT(IN) :: dtime ! time interval (s) REAL, INTENT(IN) :: date0 ! initial day INTEGER, INTENT(IN) :: itap ! time step INTEGER, INTENT(IN) :: jour ! current day of the year LOGICAL, INTENT(IN) :: debut ! true if first run step LOGICAL, INTENT(IN) :: lafin ! true if last run step REAL, DIMENSION(klon), INTENT(IN) :: rlon ! longitudes in degrees REAL, DIMENSION(klon), INTENT(IN) :: rlat ! latitudes in degrees REAL, DIMENSION(klon), INTENT(IN) :: rugoro ! rugosity length REAL, DIMENSION(klon), INTENT(IN) :: rmu0 ! cosine of solar zenith angle REAL, DIMENSION(klon), INTENT(IN) :: rain_f ! rain fall REAL, DIMENSION(klon), INTENT(IN) :: snow_f ! snow fall REAL, DIMENSION(klon), INTENT(IN) :: solsw_m ! net shortwave radiation at mean surface REAL, DIMENSION(klon), INTENT(IN) :: sollw_m ! net longwave radiation at mean surface REAL, DIMENSION(klon,klev), INTENT(IN) :: t ! temperature (K) REAL, DIMENSION(klon,klev), INTENT(IN) :: q ! water vapour (kg/kg) REAL, DIMENSION(klon,klev), INTENT(IN) :: u ! u speed REAL, DIMENSION(klon,klev), INTENT(IN) :: v ! v speed REAL, DIMENSION(klon,klev), INTENT(IN) :: pplay ! mid-layer pression (Pa) REAL, DIMENSION(klon,klev+1), INTENT(IN) :: paprs ! pression between layers (Pa) REAL, DIMENSION(klon, nbsrf), INTENT(IN) :: pctsrf ! sub-surface fraction ! Martin REAL, DIMENSION(klon), INTENT(IN) :: zsig ! slope REAL, DIMENSION(klon), INTENT(IN) :: lwdown_m ! downward longwave radiation at mean s REAL, DIMENSION(klon), INTENT(IN) :: gustiness ! gustiness REAL, DIMENSION(klon), INTENT(IN) :: cldt ! total cloud fraction REAL, DIMENSION(klon,klev), INTENT(IN) :: pphi ! geopotential (m2/s2) ! Martin !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 !! REAL, DIMENSION(klon,klev), INTENT(IN) :: t_x ! Température hors poche froide !! REAL, DIMENSION(klon,klev), INTENT(IN) :: t_w ! Température dans la poches froide !! REAL, DIMENSION(klon,klev), INTENT(IN) :: q_x ! !! REAL, DIMENSION(klon,klev), INTENT(IN) :: q_w ! Pareil pour l'humidité REAL, DIMENSION(klon,klev), INTENT(IN) :: wake_dlt !temperature difference between (w) and (x) (K) REAL, DIMENSION(klon,klev), INTENT(IN) :: wake_dlq !humidity difference between (w) and (x) (K) REAL, DIMENSION(klon), INTENT(IN) :: wake_s ! Fraction de poches froides REAL, DIMENSION(klon), INTENT(IN) :: wake_cstar! Vitesse d'expansion des poches froides REAL, DIMENSION(klon), INTENT(IN) :: wake_dens !!! ! Input/Output variables !**************************************************************************************** REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: ts ! temperature at surface (K) REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: delta_tsurf !surface temperature difference between !wake and off-wake regions !albedo SB >>> REAL, DIMENSIOn(6),intent(in) :: SFRWL REAL, DIMENSION(klon, nsw, nbsrf), INTENT(INOUT) :: alb_dir,alb_dif !albedo SB <<< !jyg Pourquoi ustar et wstar sont-elles INOUT ? REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: ustar ! u* (m/s) REAL, DIMENSION(klon, nbsrf+1), INTENT(INOUT) :: wstar ! w* (m/s) REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: u10m ! u speed at 10m REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: v10m ! v speed at 10m !jyg< !! REAL, DIMENSION(klon, klev+1, nbsrf+1), INTENT(INOUT) :: tke REAL, DIMENSION(klon, klev+1, nbsrf+1), INTENT(INOUT) :: tke_x !>jyg !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 REAL, DIMENSION(klon, klev+1, nbsrf+1), INTENT(INOUT) :: wake_dltke ! TKE_w - TKE_x !!! ! Output variables !**************************************************************************************** REAL, DIMENSION(klon), INTENT(OUT) :: cdragh ! drag coefficient for T and Q REAL, DIMENSION(klon), INTENT(OUT) :: cdragm ! drag coefficient for wind REAL, DIMENSION(klon), INTENT(OUT) :: zu1 ! u wind speed in first layer REAL, DIMENSION(klon), INTENT(OUT) :: zv1 ! v wind speed in first layer !albedo SB >>> REAL, DIMENSION(klon, nsw), INTENT(OUT) :: alb_dir_m,alb_dif_m !albedo SB <<< ! Martin REAL, DIMENSION(klon), INTENT(OUT) :: alb3_lic ! Martin REAL, DIMENSION(klon), INTENT(OUT) :: zxsens ! sensible heat flux at surface with inversed sign ! (=> positive sign upwards) REAL, DIMENSION(klon), INTENT(OUT) :: zxevap ! water vapour flux at surface, positiv upwards REAL, DIMENSION(klon), INTENT(OUT) :: zxtsol ! temperature at surface, mean for each grid point !!! jyg le ??? REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_t_w ! ! REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_q_w ! ! Tendances dans les poches REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_t_x ! ! REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_q_x ! ! Tendances hors des poches !!! jyg REAL, DIMENSION(klon), INTENT(OUT) :: zxfluxlat ! latent flux, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: zt2m ! temperature at 2m, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: qsat2m REAL, DIMENSION(klon, klev), INTENT(OUT) :: d_t ! change in temperature REAL, DIMENSION(klon, klev), INTENT(OUT) :: d_t_diss ! change in temperature REAL, DIMENSION(klon, klev), INTENT(OUT) :: d_q ! change in water vapour REAL, DIMENSION(klon, klev), INTENT(OUT) :: d_u ! change in u speed REAL, DIMENSION(klon, klev), INTENT(OUT) :: d_v ! change in v speed REAL, INTENT(OUT):: zcoefh(:, :, :) ! (klon, klev, nbsrf + 1) ! coef for turbulent diffusion of T and Q, mean for each grid point REAL, INTENT(OUT):: zcoefm(:, :, :) ! (klon, klev, nbsrf + 1) ! coef for turbulent diffusion of U and V (?), mean for each grid point !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 REAL, DIMENSION(klon), INTENT(OUT) :: zxsens_x ! Flux sensible hors poche REAL, DIMENSION(klon), INTENT(OUT) :: zxsens_w ! Flux sensible dans la poche REAL, DIMENSION(klon), INTENT(OUT) :: zxfluxlat_x! Flux latent hors poche REAL, DIMENSION(klon), INTENT(OUT) :: zxfluxlat_w! Flux latent dans la poche !! REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_wake_dlt !! REAL, DIMENSION(klon,klev), INTENT(OUT) :: d_wake_dlq ! Output only for diagnostics REAL, DIMENSION(klon), INTENT(OUT) :: cdragh_x REAL, DIMENSION(klon), INTENT(OUT) :: cdragh_w REAL, DIMENSION(klon), INTENT(OUT) :: cdragm_x REAL, DIMENSION(klon), INTENT(OUT) :: cdragm_w REAL, DIMENSION(klon), INTENT(OUT) :: kh REAL, DIMENSION(klon), INTENT(OUT) :: kh_x REAL, DIMENSION(klon), INTENT(OUT) :: kh_w !!! REAL, DIMENSION(klon), INTENT(OUT) :: slab_wfbils! heat balance at surface only for slab at ocean points REAL, DIMENSION(klon), INTENT(OUT) :: qsol ! water height in the soil (mm) REAL, DIMENSION(klon), INTENT(OUT) :: zq2m ! water vapour at 2m, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: s_pblh ! height of the planetary boundary layer(HPBL) !!! jyg le 08/02/2012 REAL, DIMENSION(klon), INTENT(OUT) :: s_pblh_x ! height of the PBL in the off-wake region REAL, DIMENSION(klon), INTENT(OUT) :: s_pblh_w ! height of the PBL in the wake region !!! REAL, DIMENSION(klon), INTENT(OUT) :: s_plcl ! condensation level !!! jyg le 08/02/2012 REAL, DIMENSION(klon), INTENT(OUT) :: s_plcl_x ! condensation level in the off-wake region REAL, DIMENSION(klon), INTENT(OUT) :: s_plcl_w ! condensation level in the wake region !!! REAL, DIMENSION(klon), INTENT(OUT) :: s_capCL ! CAPE of PBL REAL, DIMENSION(klon), INTENT(OUT) :: s_oliqCL ! liquid water intergral of PBL REAL, DIMENSION(klon), INTENT(OUT) :: s_cteiCL ! cloud top instab. crit. of PBL REAL, DIMENSION(klon), INTENT(OUT) :: s_pblT ! temperature at PBLH REAL, DIMENSION(klon), INTENT(OUT) :: s_therm ! thermal virtual temperature excess REAL, DIMENSION(klon), INTENT(OUT) :: s_trmb1 ! deep cape, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: s_trmb2 ! inhibition, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: s_trmb3 ! point Omega, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: zustar ! u* REAL, DIMENSION(klon), INTENT(OUT) :: zu10m ! u speed at 10m, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: zv10m ! v speed at 10m, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: fder_print ! fder for printing (=fder(i) + dflux_t(i) + dflux_q(i)) REAL, DIMENSION(klon), INTENT(OUT) :: zxqsurf ! humidity at surface, mean for each grid point REAL, DIMENSION(klon), INTENT(OUT) :: rh2m ! relative humidity at 2m REAL, DIMENSION(klon, klev), INTENT(OUT) :: zxfluxu ! u wind tension, mean for each grid point REAL, DIMENSION(klon, klev), INTENT(OUT) :: zxfluxv ! v wind tension, mean for each grid point REAL, DIMENSION(klon, nbsrf+1), INTENT(INOUT) :: z0m,z0h ! rugosity length (m) REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: agesno ! age of snow at surface REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: solsw ! net shortwave radiation at surface REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: sollw ! net longwave radiation at surface REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: d_ts ! change in temperature at surface REAL, DIMENSION(klon, nbsrf), INTENT(INOUT) :: evap ! evaporation at surface REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: fluxlat ! latent flux REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: t2m ! temperature at 2 meter height REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: wfbils ! heat balance at surface REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: wfbilo ! water balance at surface REAL, DIMENSION(klon, klev, nbsrf), INTENT(OUT) :: flux_t ! sensible heat flux (CpT) J/m**2/s (W/m**2) ! positve orientation downwards REAL, DIMENSION(klon, klev, nbsrf), INTENT(OUT) :: flux_u ! u wind tension (kg m/s)/(m**2 s) or Pascal REAL, DIMENSION(klon, klev, nbsrf), INTENT(OUT) :: flux_v ! v wind tension (kg m/s)/(m**2 s) or Pascal ! Output not needed REAL, DIMENSION(klon), INTENT(OUT) :: dflux_t ! change of sensible heat flux REAL, DIMENSION(klon), INTENT(OUT) :: dflux_q ! change of water vapour flux REAL, DIMENSION(klon), INTENT(OUT) :: zxsnow ! snow at surface, mean for each grid point REAL, DIMENSION(klon, klev), INTENT(OUT) :: zxfluxt ! sensible heat flux, mean for each grid point REAL, DIMENSION(klon, klev), INTENT(OUT) :: zxfluxq ! water vapour flux, mean for each grid point REAL, DIMENSION(klon, nbsrf),INTENT(OUT) :: q2m ! water vapour at 2 meter height REAL, DIMENSION(klon, klev, nbsrf), INTENT(OUT) :: flux_q ! water vapour flux(latent flux) (kg/m**2/s) ! Martin ! sisvat REAL, DIMENSION(klon), INTENT(OUT) :: qsnow ! snow water content REAL, DIMENSION(klon), INTENT(OUT) :: snowhgt ! snow height REAL, DIMENSION(klon), INTENT(OUT) :: to_ice ! snow passed to ice REAL, DIMENSION(klon), INTENT(OUT) :: sissnow ! snow in snow model REAL, DIMENSION(klon), INTENT(OUT) :: runoff ! runoff on land ice ! Martin ! Local variables with attribute SAVE !**************************************************************************************** INTEGER, SAVE :: nhoridbg, nidbg ! variables for IOIPSL !$OMP THREADPRIVATE(nhoridbg, nidbg) LOGICAL, SAVE :: debugindex=.FALSE. !$OMP THREADPRIVATE(debugindex) LOGICAL, SAVE :: first_call=.TRUE. !$OMP THREADPRIVATE(first_call) CHARACTER(len=8), DIMENSION(nbsrf), SAVE :: cl_surf !$OMP THREADPRIVATE(cl_surf) ! Other local variables !**************************************************************************************** INTEGER :: iflag_split INTEGER :: i, k, nsrf INTEGER :: knon, j INTEGER :: idayref INTEGER , DIMENSION(klon) :: ni REAL :: yt1_new REAL :: zx_alf1, zx_alf2 !valeur ambiante par extrapola REAL :: amn, amx REAL :: f1 ! fraction de longeurs visibles parmi tout SW intervalle REAL, DIMENSION(klon) :: r_co2_ppm ! taux CO2 atmosphere REAL, DIMENSION(klon) :: yts, yz0m, yz0h, ypct !albedo SB >>> REAL, DIMENSION(klon) :: yalb,yalb_vis !albedo SB <<< REAL, DIMENSION(klon) :: yu1, yv1 REAL, DIMENSION(klon) :: ysnow, yqsurf, yagesno, yqsol REAL, DIMENSION(klon) :: yrain_f, ysnow_f REAL, DIMENSION(klon) :: ysolsw, ysollw REAL, DIMENSION(klon) :: yfder REAL, DIMENSION(klon) :: yrugoro REAL, DIMENSION(klon) :: yfluxlat REAL, DIMENSION(klon) :: y_d_ts REAL, DIMENSION(klon) :: y_flux_t1, y_flux_q1 REAL, DIMENSION(klon) :: y_dflux_t, y_dflux_q REAL, DIMENSION(klon) :: y_flux_u1, y_flux_v1 REAL, DIMENSION(klon) :: yt2m, yq2m, yu10m REAL, DIMENSION(klon) :: yustar REAL, DIMENSION(klon) :: ywstar REAL, DIMENSION(klon) :: ywindsp REAL, DIMENSION(klon) :: yt10m, yq10m REAL, DIMENSION(klon) :: ypblh REAL, DIMENSION(klon) :: ylcl REAL, DIMENSION(klon) :: ycapCL REAL, DIMENSION(klon) :: yoliqCL REAL, DIMENSION(klon) :: ycteiCL REAL, DIMENSION(klon) :: ypblT REAL, DIMENSION(klon) :: ytherm REAL, DIMENSION(klon) :: ytrmb1 REAL, DIMENSION(klon) :: ytrmb2 REAL, DIMENSION(klon) :: ytrmb3 REAL, DIMENSION(klon) :: uzon, vmer REAL, DIMENSION(klon) :: tair1, qair1, tairsol REAL, DIMENSION(klon) :: psfce, patm REAL, DIMENSION(klon) :: qairsol, zgeo1, speed, zri1, pref !speed, zri1, pref, added by Fuxing WANG, 04/03/2015 REAL, DIMENSION(klon) :: rugo1 REAL, DIMENSION(klon) :: yfluxsens REAL, DIMENSION(klon) :: AcoefH, AcoefQ, BcoefH, BcoefQ REAL, DIMENSION(klon) :: AcoefU, AcoefV, BcoefU, BcoefV REAL, DIMENSION(klon) :: ypsref REAL, DIMENSION(klon) :: yevap, ytsurf_new, yalb3_new !albedo SB >>> REAL, DIMENSION(klon,nsw) :: yalb_dir_new, yalb_dif_new !albedo SB <<< REAL, DIMENSION(klon) :: ztsol REAL, DIMENSION(klon) :: alb_m ! mean albedo for whole SW interval REAL, DIMENSION(klon,klev) :: y_d_t, y_d_q, y_d_t_diss REAL, DIMENSION(klon,klev) :: y_d_u, y_d_v REAL, DIMENSION(klon,klev) :: y_flux_t, y_flux_q REAL, DIMENSION(klon,klev) :: y_flux_u, y_flux_v REAL, DIMENSION(klon,klev) :: ycoefh, ycoefm,ycoefq REAL, DIMENSION(klon) :: ycdragh, ycdragm REAL, DIMENSION(klon,klev) :: yu, yv REAL, DIMENSION(klon,klev) :: yt, yq REAL, DIMENSION(klon,klev) :: ypplay, ydelp REAL, DIMENSION(klon,klev) :: delp REAL, DIMENSION(klon,klev+1) :: ypaprs REAL, DIMENSION(klon,klev+1) :: ytke REAL, DIMENSION(klon,nsoilmx) :: ytsoil CHARACTER(len=80) :: abort_message CHARACTER(len=20) :: modname = 'pbl_surface' LOGICAL, PARAMETER :: zxli=.FALSE. ! utiliser un jeu de fonctions simples LOGICAL, PARAMETER :: check=.FALSE. !!! nrlmd le 02/05/2011 !!! jyg le 07/02/2012 REAL, DIMENSION(klon) :: ywake_s, ywake_cstar, ywake_dens !!! REAL, DIMENSION(klon,klev+1) :: ytke_x, ytke_w REAL, DIMENSION(klon,klev+1) :: ywake_dltke REAL, DIMENSION(klon,klev) :: yu_x, yv_x, yu_w, yv_w REAL, DIMENSION(klon,klev) :: yt_x, yq_x, yt_w, yq_w REAL, DIMENSION(klon,klev) :: ycoefh_x, ycoefm_x, ycoefh_w, ycoefm_w REAL, DIMENSION(klon,klev) :: ycoefq_x, ycoefq_w REAL, DIMENSION(klon) :: ycdragh_x, ycdragm_x, ycdragh_w, ycdragm_w REAL, DIMENSION(klon) :: AcoefH_x, AcoefQ_x, BcoefH_x, BcoefQ_x REAL, DIMENSION(klon) :: AcoefH_w, AcoefQ_w, BcoefH_w, BcoefQ_w REAL, DIMENSION(klon) :: AcoefU_x, AcoefV_x, BcoefU_x, BcoefV_x REAL, DIMENSION(klon) :: AcoefU_w, AcoefV_w, BcoefU_w, BcoefV_w REAL, DIMENSION(klon) :: y_flux_t1_x, y_flux_q1_x, y_flux_t1_w, y_flux_q1_w REAL, DIMENSION(klon) :: y_flux_u1_x, y_flux_v1_x, y_flux_u1_w, y_flux_v1_w REAL, DIMENSION(klon,klev) :: y_flux_t_x, y_flux_q_x, y_flux_t_w, y_flux_q_w REAL, DIMENSION(klon,klev) :: y_flux_u_x, y_flux_v_x, y_flux_u_w, y_flux_v_w REAL, DIMENSION(klon) :: yfluxlat_x, yfluxlat_w REAL, DIMENSION(klon,klev) :: y_d_t_x, y_d_q_x, y_d_t_w, y_d_q_w REAL, DIMENSION(klon,klev) :: y_d_t_diss_x, y_d_t_diss_w REAL, DIMENSION(klon,klev) :: d_t_diss_x, d_t_diss_w REAL, DIMENSION(klon,klev) :: y_d_u_x, y_d_v_x, y_d_u_w, y_d_v_w REAL, DIMENSION(klon, klev, nbsrf) :: flux_t_x, flux_q_x, flux_t_w, flux_q_w REAL, DIMENSION(klon, klev, nbsrf) :: flux_u_x, flux_v_x, flux_u_w, flux_v_w REAL, DIMENSION(klon, nbsrf) :: fluxlat_x, fluxlat_w REAL, DIMENSION(klon, klev) :: zxfluxt_x, zxfluxq_x, zxfluxt_w, zxfluxq_w REAL, DIMENSION(klon, klev) :: zxfluxu_x, zxfluxv_x, zxfluxu_w, zxfluxv_w REAL :: zx_qs_surf, zcor_surf, zdelta_surf REAL, DIMENSION(klon) :: ytsurf_th, yqsatsurf REAL, DIMENSION(klon) :: ybeta REAL, DIMENSION(klon, klev) :: d_u_x REAL, DIMENSION(klon, klev) :: d_u_w REAL, DIMENSION(klon, klev) :: d_v_x REAL, DIMENSION(klon, klev) :: d_v_w REAL, DIMENSION(klon,klev) :: CcoefH, CcoefQ, DcoefH, DcoefQ REAL, DIMENSION(klon,klev) :: CcoefU, CcoefV, DcoefU, DcoefV REAL, DIMENSION(klon,klev) :: CcoefH_x, CcoefQ_x, DcoefH_x, DcoefQ_x REAL, DIMENSION(klon,klev) :: CcoefH_w, CcoefQ_w, DcoefH_w, DcoefQ_w REAL, DIMENSION(klon,klev) :: CcoefU_x, CcoefV_x, DcoefU_x, DcoefV_x REAL, DIMENSION(klon,klev) :: CcoefU_w, CcoefV_w, DcoefU_w, DcoefV_w REAL, DIMENSION(klon,klev) :: Kcoef_hq, Kcoef_m, gama_h, gama_q REAL, DIMENSION(klon,klev) :: Kcoef_hq_x, Kcoef_m_x, gama_h_x, gama_q_x REAL, DIMENSION(klon,klev) :: Kcoef_hq_w, Kcoef_m_w, gama_h_w, gama_q_w REAL, DIMENSION(klon) :: alf_1, alf_2, alf_1_x, alf_2_x, alf_1_w, alf_2_w !!! !!!jyg le 08/02/2012 REAL, DIMENSION(klon, nbsrf) :: windsp ! REAL, DIMENSION(klon, nbsrf) :: t2m_x REAL, DIMENSION(klon, nbsrf) :: q2m_x REAL, DIMENSION(klon) :: rh2m_x REAL, DIMENSION(klon) :: qsat2m_x REAL, DIMENSION(klon, nbsrf) :: u10m_x REAL, DIMENSION(klon, nbsrf) :: v10m_x REAL, DIMENSION(klon, nbsrf) :: ustar_x REAL, DIMENSION(klon, nbsrf) :: wstar_x ! REAL, DIMENSION(klon, nbsrf) :: pblh_x REAL, DIMENSION(klon, nbsrf) :: plcl_x REAL, DIMENSION(klon, nbsrf) :: capCL_x REAL, DIMENSION(klon, nbsrf) :: oliqCL_x REAL, DIMENSION(klon, nbsrf) :: cteiCL_x REAL, DIMENSION(klon, nbsrf) :: pblt_x REAL, DIMENSION(klon, nbsrf) :: therm_x REAL, DIMENSION(klon, nbsrf) :: trmb1_x REAL, DIMENSION(klon, nbsrf) :: trmb2_x REAL, DIMENSION(klon, nbsrf) :: trmb3_x ! REAL, DIMENSION(klon, nbsrf) :: t2m_w REAL, DIMENSION(klon, nbsrf) :: q2m_w REAL, DIMENSION(klon) :: rh2m_w REAL, DIMENSION(klon) :: qsat2m_w REAL, DIMENSION(klon, nbsrf) :: u10m_w REAL, DIMENSION(klon, nbsrf) :: v10m_w REAL, DIMENSION(klon, nbsrf) :: ustar_w REAL, DIMENSION(klon, nbsrf) :: wstar_w ! REAL, DIMENSION(klon, nbsrf) :: pblh_w REAL, DIMENSION(klon, nbsrf) :: plcl_w REAL, DIMENSION(klon, nbsrf) :: capCL_w REAL, DIMENSION(klon, nbsrf) :: oliqCL_w REAL, DIMENSION(klon, nbsrf) :: cteiCL_w REAL, DIMENSION(klon, nbsrf) :: pblt_w REAL, DIMENSION(klon, nbsrf) :: therm_w REAL, DIMENSION(klon, nbsrf) :: trmb1_w REAL, DIMENSION(klon, nbsrf) :: trmb2_w REAL, DIMENSION(klon, nbsrf) :: trmb3_w ! REAL, DIMENSION(klon) :: yt2m_x REAL, DIMENSION(klon) :: yq2m_x REAL, DIMENSION(klon) :: yt10m_x REAL, DIMENSION(klon) :: yq10m_x REAL, DIMENSION(klon) :: yu10m_x REAL, DIMENSION(klon) :: yv10m_x REAL, DIMENSION(klon) :: yustar_x REAL, DIMENSION(klon) :: ywstar_x ! REAL, DIMENSION(klon) :: ypblh_x REAL, DIMENSION(klon) :: ylcl_x REAL, DIMENSION(klon) :: ycapCL_x REAL, DIMENSION(klon) :: yoliqCL_x REAL, DIMENSION(klon) :: ycteiCL_x REAL, DIMENSION(klon) :: ypblt_x REAL, DIMENSION(klon) :: ytherm_x REAL, DIMENSION(klon) :: ytrmb1_x REAL, DIMENSION(klon) :: ytrmb2_x REAL, DIMENSION(klon) :: ytrmb3_x ! REAL, DIMENSION(klon) :: yt2m_w REAL, DIMENSION(klon) :: yq2m_w REAL, DIMENSION(klon) :: yt10m_w REAL, DIMENSION(klon) :: yq10m_w REAL, DIMENSION(klon) :: yu10m_w REAL, DIMENSION(klon) :: yv10m_w REAL, DIMENSION(klon) :: yustar_w REAL, DIMENSION(klon) :: ywstar_w ! REAL, DIMENSION(klon) :: ypblh_w REAL, DIMENSION(klon) :: ylcl_w REAL, DIMENSION(klon) :: ycapCL_w REAL, DIMENSION(klon) :: yoliqCL_w REAL, DIMENSION(klon) :: ycteiCL_w REAL, DIMENSION(klon) :: ypblt_w REAL, DIMENSION(klon) :: ytherm_w REAL, DIMENSION(klon) :: ytrmb1_w REAL, DIMENSION(klon) :: ytrmb2_w REAL, DIMENSION(klon) :: ytrmb3_w ! REAL, DIMENSION(klon) :: uzon_x, vmer_x, speed_x, zri1_x, pref_x !speed_x, zri1_x, pref_x, added by Fuxing WANG, 04/03/2015 REAL, DIMENSION(klon) :: zgeo1_x, tair1_x, qair1_x, tairsol_x ! REAL, DIMENSION(klon) :: uzon_w, vmer_w, speed_w, zri1_w, pref_w !speed_w, zri1_w, pref_w, added by Fuxing WANG, 04/03/2015 REAL, DIMENSION(klon) :: zgeo1_w, tair1_w, qair1_w, tairsol_w !!! jyg le 25/03/2013 !! Variables intermediaires pour le raccord des deux colonnes à la surface REAL :: dd_Ch REAL :: dd_Cm REAL :: dd_Kh REAL :: dd_Km REAL :: dd_u REAL :: dd_v REAL :: dd_t REAL :: dd_q REAL :: dd_AH REAL :: dd_AQ REAL :: dd_AU REAL :: dd_AV REAL :: dd_BH REAL :: dd_BQ REAL :: dd_BU REAL :: dd_BV REAL :: dd_KHp REAL :: dd_KQp REAL :: dd_KUp REAL :: dd_KVp !!! !!! nrlmd le 13/06/2011 REAL, DIMENSION(klon) :: y_delta_flux_t1, y_delta_flux_q1, y_delta_flux_u1, y_delta_flux_v1 REAL, DIMENSION(klon) :: y_delta_tsurf,delta_coef,tau_eq REAL, PARAMETER :: facteur=2./sqrt(3.14) REAL, PARAMETER :: effusivity=2000. REAL, DIMENSION(klon) :: ytsurf_th_x,ytsurf_th_w,yqsatsurf_x,yqsatsurf_w REAL, DIMENSION(klon) :: ydtsurf_th REAL :: zdelta_surf_x,zdelta_surf_w,zx_qs_surf_x,zx_qs_surf_w REAL :: zcor_surf_x,zcor_surf_w REAL :: mod_wind_x, mod_wind_w REAL :: rho1 REAL, DIMENSION(klon) :: Kech_h ! Coefficient d'echange pour l'energie REAL, DIMENSION(klon) :: Kech_h_x, Kech_h_w REAL, DIMENSION(klon) :: Kech_m REAL, DIMENSION(klon) :: Kech_m_x, Kech_m_w REAL, DIMENSION(klon) :: yts_x,yts_w REAL, DIMENSION(klon) :: Kech_Hp, Kech_H_xp, Kech_H_wp REAL, DIMENSION(klon) :: Kech_Qp, Kech_Q_xp, Kech_Q_wp REAL, DIMENSION(klon) :: Kech_Up, Kech_U_xp, Kech_U_wp REAL, DIMENSION(klon) :: Kech_Vp, Kech_V_xp, Kech_V_wp REAL :: vent !!! ! For debugging with IOIPSL INTEGER, DIMENSION(nbp_lon*nbp_lat) :: ndexbg REAL :: zjulian REAL, DIMENSION(klon) :: tabindx REAL, DIMENSION(nbp_lon,nbp_lat) :: zx_lon, zx_lat REAL, DIMENSION(nbp_lon,nbp_lat) :: debugtab REAL, DIMENSION(klon,nbsrf) :: pblh ! height of the planetary boundary layer REAL, DIMENSION(klon,nbsrf) :: plcl ! condensation level REAL, DIMENSION(klon,nbsrf) :: capCL REAL, DIMENSION(klon,nbsrf) :: oliqCL REAL, DIMENSION(klon,nbsrf) :: cteiCL REAL, DIMENSION(klon,nbsrf) :: pblT REAL, DIMENSION(klon,nbsrf) :: therm REAL, DIMENSION(klon,nbsrf) :: trmb1 ! deep cape REAL, DIMENSION(klon,nbsrf) :: trmb2 ! inhibition REAL, DIMENSION(klon,nbsrf) :: trmb3 ! point Omega REAL, DIMENSION(klon,nbsrf) :: zx_rh2m, zx_qsat2m REAL, DIMENSION(klon,nbsrf) :: zx_t1 REAL, DIMENSION(klon, nbsrf) :: alb ! mean albedo for whole SW interval REAL, DIMENSION(klon) :: ylwdown ! jg : temporary (ysollwdown) REAL, DIMENSION(klon) :: ygustiness ! jg : temporary (ysollwdown) REAL :: zx_qs1, zcor1, zdelta1 ! Martin REAL, DIMENSION(klon, nbsrf) :: sollwd ! net longwave radiation at surface REAL, DIMENSION(klon) :: ytoice REAL, DIMENSION(klon) :: ysnowhgt, yqsnow, ysissnow, yrunoff REAL, DIMENSION(klon) :: yzsig REAL, DIMENSION(klon,klev) :: ypphi REAL, DIMENSION(klon) :: ycldt REAL, DIMENSION(klon) :: yrmu0 ! Martin !**************************************************************************************** ! End of declarations !**************************************************************************************** IF (prt_level >=10) print *,' -> pbl_surface, itap ',itap ! iflag_split = mod(iflag_pbl_split,2) !**************************************************************************************** ! 1) Initialisation and validation tests ! Only done first time entering this subroutine ! !**************************************************************************************** IF (first_call) THEN print*,'PBL SURFACE AVEC GUSTINESS' first_call=.FALSE. ! Initialize ok_flux_surf (for 1D model) if (klon_glo>1) ok_flux_surf=.FALSE. ! Initilize debug IO IF (debugindex .AND. mpi_size==1) THEN ! initialize IOIPSL output idayref = day_ini CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian) CALL gr_fi_ecrit(1,klon,nbp_lon,nbp_lat,rlon,zx_lon) DO i = 1, nbp_lon zx_lon(i,1) = rlon(i+1) zx_lon(i,nbp_lat) = rlon(i+1) ENDDO CALL gr_fi_ecrit(1,klon,nbp_lon,nbp_lat,rlat,zx_lat) CALL histbeg("sous_index",nbp_lon,zx_lon(:,1),nbp_lat,zx_lat(1,:), & 1,nbp_lon,1,nbp_lat, & itau_phy,zjulian,dtime,nhoridbg,nidbg) ! no vertical axis cl_surf(1)='ter' cl_surf(2)='lic' cl_surf(3)='oce' cl_surf(4)='sic' DO nsrf=1,nbsrf CALL histdef(nidbg, cl_surf(nsrf),cl_surf(nsrf), "-",nbp_lon, & nbp_lat,nhoridbg, 1, 1, 1, -99, 32, "inst", dtime,dtime) END DO CALL histend(nidbg) CALL histsync(nidbg) END IF ENDIF !**************************************************************************************** ! Force soil water content to qsol0 if qsol0>0 and VEGET=F (use bucket ! instead of ORCHIDEE) IF (qsol0>=0.) THEN PRINT*,'WARNING : On impose qsol=',qsol0 qsol(:)=qsol0 ENDIF !**************************************************************************************** !**************************************************************************************** ! 2) Initialization to zero !**************************************************************************************** ! ! 2a) Initialization of all argument variables with INTENT(OUT) !**************************************************************************************** cdragh(:)=0. ; cdragm(:)=0. zu1(:)=0. ; zv1(:)=0. !albedo SB >>> alb_dir_m=0. ; alb_dif_m=0. ; alb3_lic(:)=0. !albedo SB <<< zxsens(:)=0. ; zxevap(:)=0. ; zxtsol(:)=0. d_t_w(:,:)=0. ; d_q_w(:,:)=0. ; d_t_x(:,:)=0. ; d_q_x(:,:)=0. zxfluxlat(:)=0. zt2m(:)=0. ; zq2m(:)=0. ; qsat2m(:)=0. ; rh2m(:)=0. d_t(:,:)=0. ; d_t_diss(:,:)=0. ; d_q(:,:)=0. ; d_u(:,:)=0. ; d_v(:,:)=0. zcoefh(:,:,:)=0. ; zcoefm(:,:,:)=0. zxsens_x(:)=0. ; zxsens_w(:)=0. ; zxfluxlat_x(:)=0. ; zxfluxlat_w(:)=0. cdragh_x(:)=0. ; cdragh_w(:)=0. ; cdragm_x(:)=0. ; cdragm_w(:)=0. kh(:)=0. ; kh_x(:)=0. ; kh_w(:)=0. slab_wfbils(:)=0. s_pblh(:)=0. ; s_pblh_x(:)=0. ; s_pblh_w(:)=0. s_plcl(:)=0. ; s_plcl_x(:)=0. ; s_plcl_w(:)=0. s_capCL(:)=0. ; s_oliqCL(:)=0. ; s_cteiCL(:)=0. ; s_pblT(:)=0. s_therm(:)=0. s_trmb1(:)=0. ; s_trmb2(:)=0. ; s_trmb3(:)=0. zustar(:)=0. zu10m(:)=0. ; zv10m(:)=0. fder_print(:)=0. zxqsurf(:)=0. zxfluxu(:,:)=0. ; zxfluxv(:,:)=0. solsw(:,:)=0. ; sollw(:,:)=0. d_ts(:,:)=0. evap(:,:)=0. fluxlat(:,:)=0. wfbils(:,:)=0. ; wfbilo(:,:)=0. flux_t(:,:,:)=0. ; flux_q(:,:,:)=0. ; flux_u(:,:,:)=0. ; flux_v(:,:,:)=0. dflux_t(:)=0. ; dflux_q(:)=0. zxsnow(:)=0. zxfluxt(:,:)=0. ; zxfluxq(:,:)=0. qsnow(:)=0. ; snowhgt(:)=0. ; to_ice(:)=0. ; sissnow(:)=0. runoff(:)=0. IF (iflag_pbl<20.or.iflag_pbl>=30) THEN zcoefh(:,:,:) = 0.0 zcoefh(:,1,:) = 999999. ! zcoefh(:,k=1) should never be used zcoefm(:,:,:) = 0.0 zcoefm(:,1,:) = 999999. ! ELSE zcoefm(:,:,is_ave)=0. zcoefh(:,:,is_ave)=0. ENDIF !! ! The components "is_ave" of tke_x and wake_deltke are "OUT" variables !jyg< !! tke(:,:,is_ave)=0. tke_x(:,:,is_ave)=0. wake_dltke(:,:,is_ave)=0. !>jyg !!! jyg le 23/02/2013 t2m(:,:) = 999999. ! t2m and q2m are meaningfull only over sub-surfaces q2m(:,:) = 999999. ! actually present in the grid cell. !!! rh2m(:) = 0. ; qsat2m(:) = 0. !!! !!! jyg le 10/02/2012 rh2m_x(:) = 0. ; qsat2m_x(:) = 0. ; rh2m_w(:) = 0. ; qsat2m_w(:) = 0. !!! ! 2b) Initialization of all local variables that will be compressed later !**************************************************************************************** !! cdragh = 0.0 ; cdragm = 0.0 ; dflux_t = 0.0 ; dflux_q = 0.0 ypct = 0.0 ; yts = 0.0 ; ysnow = 0.0 !! zv1 = 0.0 ; yqsurf = 0.0 !albedo SB >>> yqsurf = 0.0 ; yalb = 0.0 ; yalb_vis = 0.0 !albedo SB <<< yrain_f = 0.0 ; ysnow_f = 0.0 ; yfder = 0.0 ; ysolsw = 0.0 ysollw = 0.0 ; yz0m = 0.0 ; yz0h = 0.0 ; yu1 = 0.0 yv1 = 0.0 ; ypaprs = 0.0 ; ypplay = 0.0 ydelp = 0.0 ; yu = 0.0 ; yv = 0.0 ; yt = 0.0 yq = 0.0 ; y_dflux_t = 0.0 ; y_dflux_q = 0.0 yrugoro = 0.0 ; ywindsp = 0.0 !! d_ts = 0.0 ; yfluxlat=0.0 ; flux_t = 0.0 ; flux_q = 0.0 yfluxlat=0.0 !! flux_u = 0.0 ; flux_v = 0.0 ; d_t = 0.0 ; d_q = 0.0 !! d_t_diss= 0.0 ;d_u = 0.0 ; d_v = 0.0 yqsol = 0.0 ytherm = 0.0 ; ytke=0. ! Martin ysnowhgt = 0.0; yqsnow = 0.0 ; yrunoff = 0.0 ; ytoice =0.0 yalb3_new = 0.0 ; ysissnow = 0.0 ypphi = 0.0 ; ycldt = 0.0 ; yrmu0 = 0.0 ! Martin !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 ytke_x=0. ; ytke_w=0. ; ywake_dltke=0. y_d_t_x=0. ; y_d_t_w=0. ; y_d_q_x=0. ; y_d_q_w=0. !! d_t_w=0. ; d_q_w=0. !! d_t_x=0. ; d_q_x=0. !! d_wake_dlt=0. ; d_wake_dlq=0. yfluxlat_x=0. ; yfluxlat_w=0. ywake_s=0. ; ywake_cstar=0. ;ywake_dens=0. !!! !!! nrlmd le 13/06/2011 tau_eq=0. ; delta_coef=0. y_delta_flux_t1=0. ydtsurf_th=0. yts_x=0. ; yts_w=0. y_delta_tsurf=0. !!! ytsoil = 999999. ! 2c) Initialization of all local variables computed within the subsurface loop and used later on !**************************************************************************************** d_t_diss_x(:,:) = 0. ; d_t_diss_w(:,:) = 0. d_u_x(:,:)=0. ; d_u_w(:,:)=0. d_v_x(:,:)=0. ; d_v_w(:,:)=0. flux_t_x(:,:,:)=0. ; flux_t_w(:,:,:)=0. flux_q_x(:,:,:)=0. ; flux_q_w(:,:,:)=0. ! !jyg< flux_u_x(:,:,:)=0. ; flux_u_w(:,:,:)=0. flux_v_x(:,:,:)=0. ; flux_v_w(:,:,:)=0. fluxlat_x(:,:)=0. ; fluxlat_w(:,:)=0. !>jyg ! !jyg< ! pblh,plcl,capCL,cteiCL ... are meaningfull only over sub-surfaces ! actually present in the grid cell ==> value set to 999999. ! !jyg< ustar(:,:) = 999999. wstar(:,:) = 999999. windsp(:,:) = SQRT(u10m(:,:)**2 + v10m(:,:)**2 ) u10m(:,:) = 999999. v10m(:,:) = 999999. !>jyg ! pblh(:,:) = 999999. ! Hauteur de couche limite plcl(:,:) = 999999. ! Niveau de condensation de la CLA capCL(:,:) = 999999. ! CAPE de couche limite oliqCL(:,:) = 999999. ! eau_liqu integree de couche limite cteiCL(:,:) = 999999. ! cloud top instab. crit. couche limite pblt(:,:) = 999999. ! T a la Hauteur de couche limite therm(:,:) = 999999. trmb1(:,:) = 999999. ! deep_cape trmb2(:,:) = 999999. ! inhibition trmb3(:,:) = 999999. ! Point Omega ! t2m_x(:,:) = 999999. q2m_x(:,:) = 999999. ustar_x(:,:) = 999999. wstar_x(:,:) = 999999. u10m_x(:,:) = 999999. v10m_x(:,:) = 999999. ! pblh_x(:,:) = 999999. ! Hauteur de couche limite plcl_x(:,:) = 999999. ! Niveau de condensation de la CLA capCL_x(:,:) = 999999. ! CAPE de couche limite oliqCL_x(:,:) = 999999. ! eau_liqu integree de couche limite cteiCL_x(:,:) = 999999. ! cloud top instab. crit. couche limite pblt_x(:,:) = 999999. ! T a la Hauteur de couche limite therm_x(:,:) = 999999. trmb1_x(:,:) = 999999. ! deep_cape trmb2_x(:,:) = 999999. ! inhibition trmb3_x(:,:) = 999999. ! Point Omega ! t2m_w(:,:) = 999999. q2m_w(:,:) = 999999. ustar_w(:,:) = 999999. wstar_w(:,:) = 999999. u10m_w(:,:) = 999999. v10m_w(:,:) = 999999. pblh_w(:,:) = 999999. ! Hauteur de couche limite plcl_w(:,:) = 999999. ! Niveau de condensation de la CLA capCL_w(:,:) = 999999. ! CAPE de couche limite oliqCL_w(:,:) = 999999. ! eau_liqu integree de couche limite cteiCL_w(:,:) = 999999. ! cloud top instab. crit. couche limite pblt_w(:,:) = 999999. ! T a la Hauteur de couche limite therm_w(:,:) = 999999. trmb1_w(:,:) = 999999. ! deep_cape trmb2_w(:,:) = 999999. ! inhibition trmb3_w(:,:) = 999999. ! Point Omega !!! ! !!! !**************************************************************************************** ! 3) - Calculate pressure thickness of each layer ! - Calculate the wind at first layer ! - Mean calculations of albedo ! - Calculate net radiance at sub-surface !**************************************************************************************** DO k = 1, klev DO i = 1, klon delp(i,k) = paprs(i,k)-paprs(i,k+1) ENDDO ENDDO !**************************************************************************************** ! Test for rugos........ from physiq.. A la fin plutot??? ! !**************************************************************************************** DO nsrf = 1, nbsrf DO i = 1, klon z0m(i,nsrf) = MAX(z0m(i,nsrf),z0min) z0h(i,nsrf) = MAX(z0h(i,nsrf),z0min) ENDDO ENDDO ! Mean calculations of albedo ! ! * alb : mean albedo for whole SW interval ! ! Mean albedo for grid point ! * alb_m : mean albedo at whole SW interval alb_dir_m(:,:) = 0.0 alb_dif_m(:,:) = 0.0 DO k = 1, nsw DO nsrf = 1, nbsrf DO i = 1, klon alb_dir_m(i,k) = alb_dir_m(i,k) + alb_dir(i,k,nsrf) * pctsrf(i,nsrf) alb_dif_m(i,k) = alb_dif_m(i,k) + alb_dif(i,k,nsrf) * pctsrf(i,nsrf) ENDDO ENDDO ENDDO ! We here suppose the fraction f1 of incoming radiance of visible radiance ! as a fraction of all shortwave radiance f1 = 0.5 ! f1 = 1 ! put f1=1 to recreate old calculations !f1 is already included with SFRWL values in each surf files alb=0.0 DO k=1,nsw DO nsrf = 1, nbsrf DO i = 1, klon alb(i,nsrf) = alb(i,nsrf) + alb_dir(i,k,nsrf)*SFRWL(k) ENDDO ENDDO ENDDO alb_m=0.0 DO k = 1,nsw DO i = 1, klon alb_m(i) = alb_m(i) + alb_dir_m(i,k)*SFRWL(k) END DO ENDDO !albedo SB <<< ! Calculation of mean temperature at surface grid points ztsol(:) = 0.0 DO nsrf = 1, nbsrf DO i = 1, klon ztsol(i) = ztsol(i) + ts(i,nsrf)*pctsrf(i,nsrf) ENDDO ENDDO ! Linear distrubution on sub-surface of long- and shortwave net radiance DO nsrf = 1, nbsrf DO i = 1, klon sollw(i,nsrf) = sollw_m(i) + 4.0*RSIGMA*ztsol(i)**3 * (ztsol(i)-ts(i,nsrf)) !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! Martin ! Apparently introduced for sisvat but not used ! sollwd(i,nsrf)= sollwd_m(i) ! ! Martin !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! solsw(i,nsrf) = solsw_m(i) * (1.-alb(i,nsrf)) / (1.-alb_m(i)) ENDDO ENDDO !**************************************************************************************** ! 4) Loop over different surfaces ! ! Only points containing a fraction of the sub surface will be treated. ! !**************************************************************************************** loop_nbsrf: DO nsrf = 1, nbsrf IF (prt_level >=10) print *,' Loop nsrf ',nsrf ! Search for index(ni) and size(knon) of domaine to treat ni(:) = 0 knon = 0 DO i = 1, klon IF (pctsrf(i,nsrf) > 0.) THEN knon = knon + 1 ni(knon) = i ENDIF ENDDO !!! jyg le 19/08/2012 ! IF (knon <= 0) THEN ! IF (prt_level >= 10) print *,' no grid point for nsrf= ',nsrf ! cycle loop_nbsrf ! ENDIF !!! ! write index, with IOIPSL IF (debugindex .AND. mpi_size==1) THEN tabindx(:)=0. DO i=1,knon tabindx(i)=REAL(i) END DO debugtab(:,:) = 0. ndexbg(:) = 0 CALL gath2cpl(tabindx,debugtab,knon,ni) CALL histwrite(nidbg,cl_surf(nsrf),itap,debugtab,nbp_lon*nbp_lat, ndexbg) ENDIF !**************************************************************************************** ! 5) Compress variables ! !**************************************************************************************** DO j = 1, knon i = ni(j) ypct(j) = pctsrf(i,nsrf) yts(j) = ts(i,nsrf) ysnow(j) = snow(i,nsrf) yqsurf(j) = qsurf(i,nsrf) yalb(j) = alb(i,nsrf) !albedo SB >>> yalb_vis(j) = alb_dir(i,1,nsrf) if(nsw==6)then yalb_vis(j)=(alb_dir(i,1,nsrf)*SFRWL(1)+alb_dir(i,2,nsrf)*SFRWL(2) & +alb_dir(i,3,nsrf)*SFRWL(3))/(SFRWL(1)+SFRWL(2)+SFRWL(3)) endif !albedo SB <<< yrain_f(j) = rain_f(i) ysnow_f(j) = snow_f(i) yagesno(j) = agesno(i,nsrf) yfder(j) = fder(i) ylwdown(j) = lwdown_m(i) ygustiness(j) = gustiness(i) ysolsw(j) = solsw(i,nsrf) ysollw(j) = sollw(i,nsrf) yz0m(j) = z0m(i,nsrf) yz0h(j) = z0h(i,nsrf) yrugoro(j) = rugoro(i) yu1(j) = u(i,1) yv1(j) = v(i,1) ypaprs(j,klev+1) = paprs(i,klev+1) !jyg< !! ywindsp(j) = SQRT(u10m(i,nsrf)**2 + v10m(i,nsrf)**2 ) ywindsp(j) = windsp(i,nsrf) !>jyg ! Martin yzsig(j) = zsig(i) ycldt(j) = cldt(i) yrmu0(j) = rmu0(i) ! Martin !!! nrlmd le 13/06/2011 y_delta_tsurf(j)=delta_tsurf(i,nsrf) !!! END DO DO k = 1, klev DO j = 1, knon i = ni(j) ypaprs(j,k) = paprs(i,k) ypplay(j,k) = pplay(i,k) ydelp(j,k) = delp(i,k) ENDDO ENDDO !!! jyg le 07/02/2012 et le 10/04/2013 DO k = 1, klev DO j = 1, knon i = ni(j) !jyg< !! ytke(j,k) = tke(i,k,nsrf) ytke(j,k) = tke_x(i,k,nsrf) !>jyg yu(j,k) = u(i,k) yv(j,k) = v(i,k) yt(j,k) = t(i,k) yq(j,k) = q(i,k) ENDDO ENDDO ! IF (iflag_split .eq.1) THEN !!! nrlmd le 02/05/2011 DO k = 1, klev DO j = 1, knon i = ni(j) yu_x(j,k) = u(i,k) yv_x(j,k) = v(i,k) yt_x(j,k) = t(i,k)-wake_s(i)*wake_dlt(i,k) yq_x(j,k) = q(i,k)-wake_s(i)*wake_dlq(i,k) yu_w(j,k) = u(i,k) yv_w(j,k) = v(i,k) yt_w(j,k) = t(i,k)+(1.-wake_s(i))*wake_dlt(i,k) yq_w(j,k) = q(i,k)+(1.-wake_s(i))*wake_dlq(i,k) !!! ENDDO ENDDO !!! nrlmd le 02/05/2011 DO k = 1, klev+1 DO j = 1, knon i = ni(j) !jyg< !! ytke_x(j,k) = tke(i,k,nsrf)-wake_s(i)*wake_dltke(i,k,nsrf) !! ytke_w(j,k) = tke(i,k,nsrf)+(1.-wake_s(i))*wake_dltke(i,k,nsrf) !! ywake_dltke(j,k) = wake_dltke(i,k,nsrf) !! ytke(j,k) = tke(i,k,nsrf) ! ytke_x(j,k) = tke_x(i,k,nsrf) ytke(j,k) = tke_x(i,k,nsrf)+wake_s(i)*wake_dltke(i,k,nsrf) ytke_w(j,k) = tke_x(i,k,nsrf)+wake_dltke(i,k,nsrf) ywake_dltke(j,k) = wake_dltke(i,k,nsrf) !>jyg ENDDO ENDDO !!! !!! jyg le 07/02/2012 DO j = 1, knon i = ni(j) ywake_s(j)=wake_s(i) ywake_cstar(j)=wake_cstar(i) ywake_dens(j)=wake_dens(i) ENDDO !!! !!! nrlmd le 13/06/2011 DO j=1,knon yts_x(j)=yts(j)-ywake_s(j)*y_delta_tsurf(j) yts_w(j)=yts(j)+(1.-ywake_s(j))*y_delta_tsurf(j) ENDDO !!! ENDIF ! (iflag_split .eq.1) !!! DO k = 1, nsoilmx DO j = 1, knon i = ni(j) ytsoil(j,k) = ftsoil(i,k,nsrf) END DO END DO ! qsol(water height in soil) only for bucket continental model IF ( nsrf .EQ. is_ter .AND. .NOT. ok_veget ) THEN DO j = 1, knon i = ni(j) yqsol(j) = qsol(i) END DO ENDIF !**************************************************************************************** ! 6a) Calculate coefficients for turbulent diffusion at surface, cdragh et cdragm. ! !**************************************************************************************** !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 ! Faire disparaitre les lignes commentees fin 2015 (le temps des tests) ! CALL clcdrag( knon, nsrf, ypaprs, ypplay, & ! yu(:,1), yv(:,1), yt(:,1), yq(:,1), & ! yts, yqsurf, yrugos, & ! ycdragm, ycdragh ) ! Fuxing WANG, 04/03/2015, replace the clcdrag by the merged version: cdrag DO i = 1, knon ! print*,'PBL ',i,RD ! print*,'PBL ',yt(i,1),ypaprs(i,1),ypplay(i,1) zgeo1(i) = RD * yt(i,1) / (0.5*(ypaprs(i,1)+ypplay(i,1))) & * (ypaprs(i,1)-ypplay(i,1)) speed(i) = SQRT(yu(i,1)**2+yv(i,1)**2) END DO CALL cdrag(knon, nsrf, & speed, yt(:,1), yq(:,1), zgeo1, ypaprs(:,1),& yts, yqsurf, yz0m, yz0h, & ycdragm, ycdragh, zri1, pref ) ! --- special Dice: on force cdragm ( a defaut de forcer ustar) MPL 05082013 IF (ok_prescr_ust) then DO i = 1, knon print *,'ycdragm avant=',ycdragm(i) vent= sqrt(yu(i,1)*yu(i,1)+yv(i,1)*yv(i,1)) ! ycdragm(i) = ust*ust/(1.+(yu(i,1)*yu(i,1)+yv(i,1)*yv(i,1))) ! ycdragm(i) = ust*ust/((1.+sqrt(yu(i,1)*yu(i,1)+yv(i,1)*yv(i,1))) & ! *sqrt(yu(i,1)*yu(i,1)+yv(i,1)*yv(i,1))) ycdragm(i) = ust*ust/(1.+vent)/vent ! print *,'ycdragm ust yu yv apres=',ycdragm(i),ust,yu(i,1),yv(i,1) ENDDO ENDIF IF (prt_level >=10) print *,'clcdrag -> ycdragh ', ycdragh ELSE !(iflag_split .eq.0) ! Faire disparaitre les lignes commentees fin 2015 (le temps des tests) ! CALL clcdrag( knon, nsrf, ypaprs, ypplay, & ! yu_x(:,1), yv_x(:,1), yt_x(:,1), yq_x(:,1), & ! yts_x, yqsurf, yrugos, & ! ycdragm_x, ycdragh_x ) ! Fuxing WANG, 04/03/2015, replace the clcdrag by the merged version: cdrag DO i = 1, knon zgeo1_x(i) = RD * yt_x(i,1) / (0.5*(ypaprs(i,1)+ypplay(i,1))) & * (ypaprs(i,1)-ypplay(i,1)) speed_x(i) = SQRT(yu_x(i,1)**2+yv_x(i,1)**2) END DO CALL cdrag(knon, nsrf, & speed_x, yt_x(:,1), yq_x(:,1), zgeo1_x, ypaprs(:,1),& yts_x, yqsurf, yz0m, yz0h, & ycdragm_x, ycdragh_x, zri1_x, pref_x ) ! --- special Dice. JYG+MPL 25112013 IF (ok_prescr_ust) then DO i = 1, knon ! print *,'ycdragm_x avant=',ycdragm_x(i) vent= sqrt(yu_x(i,1)*yu_x(i,1)+yv_x(i,1)*yv_x(i,1)) ycdragm_x(i) = ust*ust/(1.+vent)/vent ! print *,'ycdragm_x ust yu yv apres=',ycdragm_x(i),ust,yu_x(i,1),yv_x(i,1) ENDDO ENDIF IF (prt_level >=10) print *,'clcdrag -> ycdragh_x ', ycdragh_x ! ! Faire disparaitre les lignes commentees fin 2015 (le temps des tests) ! CALL clcdrag( knon, nsrf, ypaprs, ypplay, & ! yu_w(:,1), yv_w(:,1), yt_w(:,1), yq_w(:,1), & ! yts_w, yqsurf, yz0m, & ! ycdragm_w, ycdragh_w ) ! Fuxing WANG, 04/03/2015, replace the clcdrag by the merged version: cdrag DO i = 1, knon zgeo1_w(i) = RD * yt_w(i,1) / (0.5*(ypaprs(i,1)+ypplay(i,1))) & * (ypaprs(i,1)-ypplay(i,1)) speed_w(i) = SQRT(yu_w(i,1)**2+yv_w(i,1)**2) END DO CALL cdrag(knon, nsrf, & speed_w, yt_w(:,1), yq_w(:,1), zgeo1_w, ypaprs(:,1),& yts_w, yqsurf, yz0m, yz0h, & ycdragm_w, ycdragh_w, zri1_w, pref_w ) ! --- special Dice. JYG+MPL 25112013 puis BOMEX IF (ok_prescr_ust) then DO i = 1, knon ! print *,'ycdragm_w avant=',ycdragm_w(i) vent= sqrt(yu_w(i,1)*yu_w(i,1)+yv_w(i,1)*yv_w(i,1)) ycdragm_w(i) = ust*ust/(1.+vent)/vent ! print *,'ycdragm_w ust yu yv apres=',ycdragm_w(i),ust,yu_w(i,1),yv_w(i,1) ENDDO ENDIF IF (prt_level >=10) print *,'clcdrag -> ycdragh_w ', ycdragh_w !!! ENDIF ! (iflag_split .eq.0) !!! !**************************************************************************************** ! 6b) Calculate coefficients for turbulent diffusion in the atmosphere, ycoefh et ycoefm. ! !**************************************************************************************** !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 IF (prt_level >=10) THEN print *,' args coef_diff_turb: yu ', yu print *,' args coef_diff_turb: yv ', yv print *,' args coef_diff_turb: yq ', yq print *,' args coef_diff_turb: yt ', yt print *,' args coef_diff_turb: yts ', yts print *,' args coef_diff_turb: yz0m ', yz0m print *,' args coef_diff_turb: yqsurf ', yqsurf print *,' args coef_diff_turb: ycdragm ', ycdragm print *,' args coef_diff_turb: ycdragh ', ycdragh print *,' args coef_diff_turb: ytke ', ytke ENDIF CALL coef_diff_turb(dtime, nsrf, knon, ni, & ypaprs, ypplay, yu, yv, yq, yt, yts, yqsurf, ycdragm, & ycoefm, ycoefh, ytke) IF (iflag_pbl>=20.AND.iflag_pbl<30) THEN ! In this case, coef_diff_turb is called for the Cd only DO k = 2, klev DO j = 1, knon i = ni(j) ycoefh(j,k) = zcoefh(i,k,nsrf) ycoefm(j,k) = zcoefm(i,k,nsrf) ENDDO ENDDO ENDIF IF (prt_level >=10) print *,'coef_diff_turb -> ycoefh ',ycoefh ! ELSE !(iflag_split .eq.0) IF (prt_level >=10) THEN print *,' args coef_diff_turb: yu_x ', yu_x print *,' args coef_diff_turb: yv_x ', yv_x print *,' args coef_diff_turb: yq_x ', yq_x print *,' args coef_diff_turb: yt_x ', yt_x print *,' args coef_diff_turb: yts_x ', yts_x print *,' args coef_diff_turb: yqsurf ', yqsurf print *,' args coef_diff_turb: ycdragm_x ', ycdragm_x print *,' args coef_diff_turb: ycdragh_x ', ycdragh_x print *,' args coef_diff_turb: ytke_x ', ytke_x ENDIF CALL coef_diff_turb(dtime, nsrf, knon, ni, & ypaprs, ypplay, yu_x, yv_x, yq_x, yt_x, yts_x, yqsurf, ycdragm_x, & ycoefm_x, ycoefh_x, ytke_x) IF (iflag_pbl>=20.AND.iflag_pbl<30) THEN ! In this case, coef_diff_turb is called for the Cd only DO k = 2, klev DO j = 1, knon i = ni(j) ycoefh_x(j,k) = zcoefh(i,k,nsrf) ycoefm_x(j,k) = zcoefm(i,k,nsrf) ENDDO ENDDO ENDIF IF (prt_level >=10) print *,'coef_diff_turb -> ycoefh_x ',ycoefh_x ! IF (prt_level >=10) THEN print *,' args coef_diff_turb: yu_w ', yu_w print *,' args coef_diff_turb: yv_w ', yv_w print *,' args coef_diff_turb: yq_w ', yq_w print *,' args coef_diff_turb: yt_w ', yt_w print *,' args coef_diff_turb: yts_w ', yts_w print *,' args coef_diff_turb: yqsurf ', yqsurf print *,' args coef_diff_turb: ycdragm_w ', ycdragm_w print *,' args coef_diff_turb: ycdragh_w ', ycdragh_w print *,' args coef_diff_turb: ytke_w ', ytke_w ENDIF CALL coef_diff_turb(dtime, nsrf, knon, ni, & ypaprs, ypplay, yu_w, yv_w, yq_w, yt_w, yts_w, yqsurf, ycdragm_w, & ycoefm_w, ycoefh_w, ytke_w) IF (iflag_pbl>=20.AND.iflag_pbl<30) THEN ! In this case, coef_diff_turb is called for the Cd only DO k = 2, klev DO j = 1, knon i = ni(j) ycoefh_w(j,k) = zcoefh(i,k,nsrf) ycoefm_w(j,k) = zcoefm(i,k,nsrf) ENDDO ENDDO ENDIF IF (prt_level >=10) print *,'coef_diff_turb -> ycoefh_w ',ycoefh_w ! !!!jyg le 10/04/2013 !! En attendant de traiter le transport des traceurs dans les poches froides, formule !! arbitraire pour ycoefh et ycoefm DO k = 2,klev DO j = 1,knon ycoefh(j,k) = ycoefh_x(j,k) + ywake_s(j)*(ycoefh_w(j,k) - ycoefh_x(j,k)) ycoefm(j,k) = ycoefm_x(j,k) + ywake_s(j)*(ycoefm_w(j,k) - ycoefm_x(j,k)) ENDDO ENDDO !!! ENDIF ! (iflag_split .eq.0) !!! !**************************************************************************************** ! ! 8) "La descente" - "The downhill" ! ! climb_hq_down and climb_wind_down calculate the coefficients ! Ccoef_X et Dcoef_X for X=[H, Q, U, V]. ! Only the coefficients at surface for H and Q are returned. ! !**************************************************************************************** ! - Calculate the coefficients Ccoef_H, Ccoef_Q, Dcoef_H and Dcoef_Q !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 CALL climb_hq_down(knon, ycoefh, ypaprs, ypplay, & ydelp, yt, yq, dtime, & !!! jyg le 09/05/2011 CcoefH, CcoefQ, DcoefH, DcoefQ, & Kcoef_hq, gama_q, gama_h, & !!! AcoefH, AcoefQ, BcoefH, BcoefQ) ELSE !(iflag_split .eq.0) CALL climb_hq_down(knon, ycoefh_x, ypaprs, ypplay, & ydelp, yt_x, yq_x, dtime, & !!! nrlmd le 02/05/2011 CcoefH_x, CcoefQ_x, DcoefH_x, DcoefQ_x, & Kcoef_hq_x, gama_q_x, gama_h_x, & !!! AcoefH_x, AcoefQ_x, BcoefH_x, BcoefQ_x) ! CALL climb_hq_down(knon, ycoefh_w, ypaprs, ypplay, & ydelp, yt_w, yq_w, dtime, & !!! nrlmd le 02/05/2011 CcoefH_w, CcoefQ_w, DcoefH_w, DcoefQ_w, & Kcoef_hq_w, gama_q_w, gama_h_w, & !!! AcoefH_w, AcoefQ_w, BcoefH_w, BcoefQ_w) !!! ENDIF ! (iflag_split .eq.0) !!! ! - Calculate the coefficients Ccoef_U, Ccoef_V, Dcoef_U and Dcoef_V !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 CALL climb_wind_down(knon, dtime, ycoefm, ypplay, ypaprs, yt, ydelp, yu, yv, & !!! jyg le 09/05/2011 CcoefU, CcoefV, DcoefU, DcoefV, & Kcoef_m, alf_1, alf_2, & !!! AcoefU, AcoefV, BcoefU, BcoefV) ELSE ! (iflag_split .eq.0) CALL climb_wind_down(knon, dtime, ycoefm_x, ypplay, ypaprs, yt_x, ydelp, yu_x, yv_x, & !!! nrlmd le 02/05/2011 CcoefU_x, CcoefV_x, DcoefU_x, DcoefV_x, & Kcoef_m_x, alf_1_x, alf_2_x, & !!! AcoefU_x, AcoefV_x, BcoefU_x, BcoefV_x) ! CALL climb_wind_down(knon, dtime, ycoefm_w, ypplay, ypaprs, yt_w, ydelp, yu_w, yv_w, & !!! nrlmd le 02/05/2011 CcoefU_w, CcoefV_w, DcoefU_w, DcoefV_w, & Kcoef_m_w, alf_1_w, alf_2_w, & !!! AcoefU_w, AcoefV_w, BcoefU_w, BcoefV_w) !!! ENDIF ! (iflag_split .eq.0) !!! !**************************************************************************************** ! 9) Small calculations ! !**************************************************************************************** ! - Reference pressure is given the values at surface level ypsref(:) = ypaprs(:,1) ! - CO2 field on 2D grid to be sent to ORCHIDEE ! Transform to compressed field IF (carbon_cycle_cpl) THEN DO i=1,knon r_co2_ppm(i) = co2_send(ni(i)) END DO ELSE r_co2_ppm(:) = co2_ppm ! Constant field END IF !!! nrlmd le 13/06/2011 !----- On finit le calcul des coefficients d'échange:on multiplie le cdrag par le module du vent et la densité dans la première couche ! Kech_h_x(j) = ycdragh_x(j) * & ! (1.0+SQRT(yu_x(j,1)**2+yv_x(j,1)**2)) * & ! ypplay(j,1)/(RD*yt_x(j,1)) ! Kech_h_w(j) = ycdragh_w(j) * & ! (1.0+SQRT(yu_w(j,1)**2+yv_w(j,1)**2)) * & ! ypplay(j,1)/(RD*yt_w(j,1)) ! Kech_h(j) = (1.-ywake_s(j))*Kech_h_x(j)+ywake_s(j)*Kech_h_w(j) ! ! Kech_m_x(j) = ycdragm_x(j) * & ! (1.0+SQRT(yu_x(j,1)**2+yv_x(j,1)**2)) * & ! ypplay(j,1)/(RD*yt_x(j,1)) ! Kech_m_w(j) = ycdragm_w(j) * & ! (1.0+SQRT(yu_w(j,1)**2+yv_w(j,1)**2)) * & ! ypplay(j,1)/(RD*yt_w(j,1)) ! Kech_m(j) = (1.-ywake_s(j))*Kech_m_x(j)+ywake_s(j)*Kech_m_w(j) !!! !!! nrlmd le 02/05/2011 -----------------------On raccorde les 2 colonnes dans la couche 1 !---------------------------------------------------------------------------------------- !!! jyg le 07/02/2012 IF (iflag_split .eq.1) THEN !!! !!! jyg le 09/04/2013 ; passage aux nouvelles expressions en differences DO j=1,knon ! ! Calcul des coefficients d echange mod_wind_x = 1.0+SQRT(yu_x(j,1)**2+yv_x(j,1)**2) mod_wind_w = 1.0+SQRT(yu_w(j,1)**2+yv_w(j,1)**2) rho1 = ypplay(j,1)/(RD*yt(j,1)) Kech_h_x(j) = ycdragh_x(j) * mod_wind_x * rho1 Kech_h_w(j) = ycdragh_w(j) * mod_wind_w * rho1 Kech_m_x(j) = ycdragm_x(j) * mod_wind_x * rho1 Kech_m_w(j) = ycdragm_w(j) * mod_wind_w * rho1 ! dd_Kh = Kech_h_w(j) - Kech_h_x(j) dd_Km = Kech_m_w(j) - Kech_m_x(j) IF (prt_level >=10) THEN print *,' mod_wind_x, mod_wind_w ', mod_wind_x, mod_wind_w print *,' rho1 ',rho1 print *,' ycdragh_x(j),ycdragm_x(j) ',ycdragh_x(j),ycdragm_x(j) print *,' ycdragh_w(j),ycdragm_w(j) ',ycdragh_w(j),ycdragm_w(j) print *,' dd_Kh: ',dd_KH ENDIF ! Kech_h(j) = Kech_h_x(j) + ywake_s(j)*dd_Kh Kech_m(j) = Kech_m_x(j) + ywake_s(j)*dd_Km ! ! Calcul des coefficients d echange corriges des retroactions Kech_H_xp(j) = Kech_h_x(j)/(1.-BcoefH_x(j)*Kech_h_x(j)*dtime) Kech_H_wp(j) = Kech_h_w(j)/(1.-BcoefH_w(j)*Kech_h_w(j)*dtime) Kech_Q_xp(j) = Kech_h_x(j)/(1.-BcoefQ_x(j)*Kech_h_x(j)*dtime) Kech_Q_wp(j) = Kech_h_w(j)/(1.-BcoefQ_w(j)*Kech_h_w(j)*dtime) Kech_U_xp(j) = Kech_m_x(j)/(1.-BcoefU_x(j)*Kech_m_x(j)*dtime) Kech_U_wp(j) = Kech_m_w(j)/(1.-BcoefU_w(j)*Kech_m_w(j)*dtime) Kech_V_xp(j) = Kech_m_x(j)/(1.-BcoefV_x(j)*Kech_m_x(j)*dtime) Kech_V_wp(j) = Kech_m_w(j)/(1.-BcoefV_w(j)*Kech_m_w(j)*dtime) ! dd_KHp = Kech_H_wp(j) - Kech_H_xp(j) dd_KQp = Kech_Q_wp(j) - Kech_Q_xp(j) dd_KUp = Kech_U_wp(j) - Kech_U_xp(j) dd_KVp = Kech_V_wp(j) - Kech_V_xp(j) ! Kech_Hp(j) = Kech_H_xp(j) + ywake_s(j)*dd_KHp Kech_Qp(j) = Kech_Q_xp(j) + ywake_s(j)*dd_KQp Kech_Up(j) = Kech_U_xp(j) + ywake_s(j)*dd_KUp Kech_Vp(j) = Kech_V_xp(j) + ywake_s(j)*dd_KVp ! ! Calcul des differences w-x dd_CM = ycdragm_w(j) - ycdragm_x(j) dd_CH = ycdragh_w(j) - ycdragh_x(j) dd_u = yu_w(j,1) - yu_x(j,1) dd_v = yv_w(j,1) - yv_x(j,1) dd_t = yt_w(j,1) - yt_x(j,1) dd_q = yq_w(j,1) - yq_x(j,1) dd_AH = AcoefH_w(j) - AcoefH_x(j) dd_AQ = AcoefQ_w(j) - AcoefQ_x(j) dd_AU = AcoefU_w(j) - AcoefU_x(j) dd_AV = AcoefV_w(j) - AcoefV_x(j) dd_BH = BcoefH_w(j) - BcoefH_x(j) dd_BQ = BcoefQ_w(j) - BcoefQ_x(j) dd_BU = BcoefU_w(j) - BcoefU_x(j) dd_BV = BcoefV_w(j) - BcoefV_x(j) ! IF (prt_level >=10) THEN print *,'Variables pour la fusion : Kech_H_xp(j)' ,Kech_H_xp(j) print *,'Variables pour la fusion : Kech_H_wp(j)' ,Kech_H_wp(j) print *,'Variables pour la fusion : Kech_Hp(j)' ,Kech_Hp(j) print *,'Variables pour la fusion : Kech_h(j)' ,Kech_h(j) ENDIF ! ! Calcul des coef A, B équivalents dans la couche 1 ! AcoefH(j) = AcoefH_x(j) + ywake_s(j)*(Kech_H_wp(j)/Kech_Hp(j))*dd_AH AcoefQ(j) = AcoefQ_x(j) + ywake_s(j)*(Kech_Q_wp(j)/Kech_Qp(j))*dd_AQ AcoefU(j) = AcoefU_x(j) + ywake_s(j)*(Kech_U_wp(j)/Kech_Up(j))*dd_AU AcoefV(j) = AcoefV_x(j) + ywake_s(j)*(Kech_V_wp(j)/Kech_Vp(j))*dd_AV ! BcoefH(j) = BcoefH_x(j) + ywake_s(j)*BcoefH_x(j)*(dd_Kh/Kech_h(j))*(1.+Kech_H_wp(j)/Kech_Hp(j)) & + ywake_s(j)*(Kech_H_wp(j)/Kech_Hp(j))*(Kech_h_w(j)/Kech_h(j))*dd_BH BcoefQ(j) = BcoefQ_x(j) + ywake_s(j)*BcoefQ_x(j)*(dd_Kh/Kech_h(j))*(1.+Kech_Q_wp(j)/Kech_Qp(j)) & + ywake_s(j)*(Kech_Q_wp(j)/Kech_Qp(j))*(Kech_h_w(j)/Kech_h(j))*dd_BQ BcoefU(j) = BcoefU_x(j) + ywake_s(j)*BcoefU_x(j)*(dd_Km/Kech_h(j))*(1.+Kech_U_wp(j)/Kech_Up(j)) & + ywake_s(j)*(Kech_U_wp(j)/Kech_Up(j))*(Kech_m_w(j)/Kech_m(j))*dd_BU BcoefV(j) = BcoefV_x(j) + ywake_s(j)*BcoefV_x(j)*(dd_Km/Kech_h(j))*(1.+Kech_V_wp(j)/Kech_Vp(j)) & + ywake_s(j)*(Kech_V_wp(j)/Kech_Vp(j))*(Kech_m_w(j)/Kech_m(j))*dd_BV ! ! Calcul des cdrag équivalents dans la couche ! ycdragm(j) = ycdragm_x(j) + ywake_s(j)*dd_CM ycdragh(j) = ycdragh_x(j) + ywake_s(j)*dd_CH ! ! Calcul de T, q, u et v équivalents dans la couche 1 yt(j,1) = yt_x(j,1) + ywake_s(j)*(Kech_h_w(j)/Kech_h(j))*dd_t yq(j,1) = yq_x(j,1) + ywake_s(j)*(Kech_h_w(j)/Kech_h(j))*dd_q yu(j,1) = yu_x(j,1) + ywake_s(j)*(Kech_m_w(j)/Kech_m(j))*dd_u yv(j,1) = yv_x(j,1) + ywake_s(j)*(Kech_m_w(j)/Kech_m(j))*dd_v ENDDO !!! ENDIF ! (iflag_split .eq.1) !!! !**************************************************************************************** ! ! Calulate t2m and q2m for the case of calculation at land grid points ! t2m and q2m are needed as input to ORCHIDEE ! !**************************************************************************************** IF (nsrf == is_ter) THEN DO i = 1, knon zgeo1(i) = RD * yt(i,1) / (0.5*(ypaprs(i,1)+ypplay(i,1))) & * (ypaprs(i,1)-ypplay(i,1)) END DO ! Calculate the temperature et relative humidity at 2m and the wind at 10m CALL stdlevvar(klon, knon, is_ter, zxli, & yu(:,1), yv(:,1), yt(:,1), yq(:,1), zgeo1, & yts, yqsurf, yz0m, yz0h, ypaprs(:,1), ypplay(:,1), & yt2m, yq2m, yt10m, yq10m, yu10m, yustar) END IF !**************************************************************************************** ! ! 10) Switch according to current surface ! It is necessary to start with the continental surfaces because the ocean ! needs their run-off. ! !**************************************************************************************** SELECT CASE(nsrf) CASE(is_ter) ! print*,"DEBUGTS",yts(knon/2),ylwdown(knon/2) CALL surf_land(itap, dtime, date0, jour, knon, ni,& rlon, rlat, yrmu0, & debut, lafin, ydelp(:,1), r_co2_ppm, ysolsw, ysollw, yalb, & yts, ypplay(:,1), ycdragh, ycdragm, yrain_f, ysnow_f, yt(:,1), yq(:,1),& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ypsref, yu1, yv1, ygustiness, yrugoro, pctsrf, & ylwdown, yq2m, yt2m, & ysnow, yqsol, yagesno, ytsoil, & yz0m, yz0h, SFRWL, yalb_dir_new, yalb_dif_new, yevap, yfluxsens,yfluxlat,& yqsurf, ytsurf_new, y_dflux_t, y_dflux_q, & y_flux_u1, y_flux_v1 ) ! Special DICE MPL 05082013 puis BOMEX IF (ok_prescr_ust) THEN do j=1,knon ! ysnow(:)=0. ! yqsol(:)=0. ! yagesno(:)=50. ! ytsoil(:,:)=300. ! yz0_new(:)=0.001 ! yevap(:)=flat/RLVTT ! yfluxlat(:)=-flat ! yfluxsens(:)=-fsens ! yqsurf(:)=0. ! ytsurf_new(:)=tg ! y_dflux_t(:)=0. ! y_dflux_q(:)=0. y_flux_u1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yu(j,1)*ypplay(j,1)/RD/yt(j,1) y_flux_v1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yv(j,1)*ypplay(j,1)/RD/yt(j,1) enddo ENDIF CASE(is_lic) ! Martin CALL surf_landice(itap, dtime, knon, ni, & rlon, rlat, debut, lafin, & yrmu0, ylwdown, yalb, ypphi(:,1), & ysolsw, ysollw, yts, ypplay(:,1), & ycdragh, ycdragm, yrain_f, ysnow_f, yt(:,1), yq(:,1),& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ypsref, yu1, yv1, ygustiness, yrugoro, pctsrf, & ysnow, yqsurf, yqsol, yagesno, & ytsoil, yz0m, yz0h, SFRWL, yalb_dir_new, yalb_dif_new, yevap,yfluxsens,yfluxlat, & ytsurf_new, y_dflux_t, y_dflux_q, & yzsig, ycldt, & ysnowhgt, yqsnow, ytoice, ysissnow, & yalb3_new, yrunoff, & y_flux_u1, y_flux_v1) !jyg< !! alb3_lic(:)=0. !>jyg DO j = 1, knon i = ni(j) alb3_lic(i) = yalb3_new(j) snowhgt(i) = ysnowhgt(j) qsnow(i) = yqsnow(j) to_ice(i) = ytoice(j) sissnow(i) = ysissnow(j) runoff(i) = yrunoff(j) END DO ! Martin ! Special DICE MPL 05082013 puis BOMEX MPL 20150410 IF (ok_prescr_ust) THEN DO j=1,knon y_flux_u1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yu(j,1)*ypplay(j,1)/RD/yt(j,1) y_flux_v1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yv(j,1)*ypplay(j,1)/RD/yt(j,1) ENDDO ENDIF CASE(is_oce) CALL surf_ocean(rlon, rlat, ysolsw, ysollw, yalb_vis, & ywindsp, rmu0, yfder, yts, & itap, dtime, jour, knon, ni, & ypplay(:,1), zgeo1/RG, ycdragh, ycdragm, yrain_f, ysnow_f, yt(:,1), yq(:,1),& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ypsref, yu1, yv1, ygustiness, yrugoro, pctsrf, & ysnow, yqsurf, yagesno, & yz0m, yz0h, SFRWL,yalb_dir_new, yalb_dif_new, yevap, yfluxsens,yfluxlat,& ytsurf_new, y_dflux_t, y_dflux_q, slab_wfbils, & y_flux_u1, y_flux_v1) IF (prt_level >=10) THEN print *,'arg de surf_ocean: ycdragh ',ycdragh print *,'arg de surf_ocean: ycdragm ',ycdragm print *,'arg de surf_ocean: yt ', yt print *,'arg de surf_ocean: yq ', yq print *,'arg de surf_ocean: yts ', yts print *,'arg de surf_ocean: AcoefH ',AcoefH print *,'arg de surf_ocean: AcoefQ ',AcoefQ print *,'arg de surf_ocean: BcoefH ',BcoefH print *,'arg de surf_ocean: BcoefQ ',BcoefQ print *,'arg de surf_ocean: yevap ',yevap print *,'arg de surf_ocean: yfluxsens ',yfluxsens print *,'arg de surf_ocean: yfluxlat ',yfluxlat print *,'arg de surf_ocean: ytsurf_new ',ytsurf_new ENDIF ! Special DICE MPL 05082013 puis BOMEX MPL 20150410 IF (ok_prescr_ust) THEN DO j=1,knon y_flux_u1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yu(j,1)*ypplay(j,1)/RD/yt(j,1) y_flux_v1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yv(j,1)*ypplay(j,1)/RD/yt(j,1) ENDDO ENDIF CASE(is_sic) CALL surf_seaice( & !albedo SB >>> rlon, rlat, ysolsw, ysollw, yalb_vis, yfder, & !albedo SB <<< itap, dtime, jour, knon, ni, & lafin, & yts, ypplay(:,1), ycdragh, ycdragm, yrain_f, ysnow_f, yt(:,1), yq(:,1),& AcoefH, AcoefQ, BcoefH, BcoefQ, & AcoefU, AcoefV, BcoefU, BcoefV, & ypsref, yu1, yv1, ygustiness, pctsrf, & ysnow, yqsurf, yqsol, yagesno, ytsoil, & !albedo SB >>> yz0m, yz0h, SFRWL, yalb_dir_new, yalb_dif_new, yevap, yfluxsens,yfluxlat,& !albedo SB <<< ytsurf_new, y_dflux_t, y_dflux_q, & y_flux_u1, y_flux_v1) ! Special DICE MPL 05082013 puis BOMEX MPL 20150410 IF (ok_prescr_ust) THEN DO j=1,knon y_flux_u1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yu(j,1)*ypplay(j,1)/RD/yt(j,1) y_flux_v1(j)=ycdragm(j)*(1.+sqrt(yu(j,1)*yu(j,1)+yv(j,1)*yv(j,1)))*yv(j,1)*ypplay(j,1)/RD/yt(j,1) ENDDO ENDIF CASE DEFAULT WRITE(lunout,*) 'Surface index = ', nsrf abort_message = 'Surface index not valid' CALL abort_physic(modname,abort_message,1) END SELECT !**************************************************************************************** ! 11) - Calcul the increment of surface temperature ! !**************************************************************************************** if (evap0>=0.) then yevap(:)=evap0 yevap(:)=RLVTT*evap0 endif y_d_ts(1:knon) = ytsurf_new(1:knon) - yts(1:knon) !**************************************************************************************** ! ! 12) "La remontee" - "The uphill" ! ! The fluxes (y_flux_X) and tendancy (y_d_X) are calculated ! for X=H, Q, U and V, for all vertical levels. ! !**************************************************************************************** !!! !!! jyg le 10/04/2013 !!! IF (ok_flux_surf) THEN IF (prt_level >=10) THEN PRINT *,'pbl_surface: fsens flat RLVTT=',fsens,flat,RLVTT ENDIF y_flux_t1(:) = fsens y_flux_q1(:) = flat/RLVTT yfluxlat(:) = flat ! IF (iflag_split .eq.0) THEN do j=1,knon Kech_h(j) = ycdragh(j) * (1.0+SQRT(yu(j,1)**2+yv(j,1)**2)) * & ypplay(j,1)/(RD*yt(j,1)) enddo ENDIF ! (iflag_split .eq.0) DO j = 1, knon yt1_new=(1./RCPD)*(AcoefH(j)+BcoefH(j)*yfluxsens(j)*dtime) ytsurf_new(j)=yt1_new-yfluxsens(j)/(Kech_h(j)*RCPD) ENDDO do j=1,knon y_d_ts(j) = ytsurf_new(j) - yts(j) enddo ELSE ! (ok_flux_surf) do j=1,knon y_flux_t1(j) = yfluxsens(j) y_flux_q1(j) = -yevap(j) enddo ENDIF IF (prt_level >=10) THEN DO j=1,knon print*,'y_flux_t1,yfluxlat,wakes' & & , y_flux_t1(j), yfluxlat(j), ywake_s(j) print*,'beta,ytsurf_new', ybeta(j), ytsurf_new(j) print*,'effusivity,facteur,cstar', effusivity, facteur,wake_cstar(j) ENDDO ENDIF !!! jyg le 07/02/2012 puis le 10/04/2013 IF (iflag_split .eq.1) THEN !!! DO j=1,knon y_delta_flux_t1(j) = ( Kech_H_wp(j)*Kech_H_xp(j)*(AcoefH_w(j)-AcoefH_x(j)) + & y_flux_t1(j)*(Kech_H_wp(j)-Kech_H_xp(j)) ) / Kech_Hp(j) y_delta_flux_q1(j) = ( Kech_Q_wp(j)*Kech_Q_xp(j)*(AcoefQ_w(j)-AcoefQ_x(j)) + & y_flux_q1(j)*(Kech_Q_wp(j)-Kech_Q_xp(j)) ) / Kech_Qp(j) y_delta_flux_u1(j) = ( Kech_U_wp(j)*Kech_U_xp(j)*(AcoefU_w(j)-AcoefU_x(j)) + & y_flux_u1(j)*(Kech_U_wp(j)-Kech_U_xp(j)) ) / Kech_Up(j) y_delta_flux_v1(j) = ( Kech_V_wp(j)*Kech_V_xp(j)*(AcoefV_w(j)-AcoefV_x(j)) + & y_flux_v1(j)*(Kech_V_wp(j)-Kech_V_xp(j)) ) / Kech_Vp(j) ! y_flux_t1_x(j)=y_flux_t1(j) - ywake_s(j)*y_delta_flux_t1(j) y_flux_t1_w(j)=y_flux_t1(j) + (1.-ywake_s(j))*y_delta_flux_t1(j) y_flux_q1_x(j)=y_flux_q1(j) - ywake_s(j)*y_delta_flux_q1(j) y_flux_q1_w(j)=y_flux_q1(j) + (1.-ywake_s(j))*y_delta_flux_q1(j) y_flux_u1_x(j)=y_flux_u1(j) - ywake_s(j)*y_delta_flux_u1(j) y_flux_u1_w(j)=y_flux_u1(j) + (1.-ywake_s(j))*y_delta_flux_u1(j) y_flux_v1_x(j)=y_flux_v1(j) - ywake_s(j)*y_delta_flux_v1(j) y_flux_v1_w(j)=y_flux_v1(j) + (1.-ywake_s(j))*y_delta_flux_v1(j) ! yfluxlat_x(j)=y_flux_q1_x(j)*RLVTT yfluxlat_w(j)=y_flux_q1_w(j)*RLVTT ENDDO ! !!jyg!! A reprendre apres reflexion =============================================== !!jyg!! !!jyg!! DO j=1,knon !!jyg!!!!! nrlmd le 13/06/2011 !!jyg!! !!jyg!!!----Diffusion dans le sol dans le cas continental seulement !!jyg!! IF (nsrf.eq.is_ter) THEN !!jyg!!!----Calcul du coefficient delta_coeff !!jyg!! tau_eq(j)=(ywake_s(j)/2.)*(1./max(wake_cstar(j),0.01))*sqrt(0.4/(3.14*max(wake_dens(j),8e-12))) !!jyg!! !!jyg!!! delta_coef(j)=dtime/(effusivity*sqrt(tau_eq(j))) !!jyg!! delta_coef(j)=facteur*sqrt(tau_eq(j))/effusivity !!jyg!!! delta_coef(j)=0. !!jyg!! ELSE !!jyg!! delta_coef(j)=0. !!jyg!! ENDIF !!jyg!! !!jyg!!!----Calcul de delta_tsurf !!jyg!! y_delta_tsurf(j)=delta_coef(j)*y_delta_flux_t1(j) !!jyg!! !!jyg!!!----Si il n'y a pas des poches... !!jyg!! IF (wake_cstar(j).le.0.01) THEN !!jyg!! y_delta_tsurf(j)=0. !!jyg!! y_delta_flux_t1(j)=0. !!jyg!! ENDIF !!jyg!! !!jyg!!!-----Calcul de ybeta (evap_réelle/evap_potentielle) !!jyg!!!!!!! jyg le 23/02/2012 !!jyg!!!!!!! !!jyg!!!! ybeta(j)=y_flux_q1(j) / & !!jyg!!!! & (Kech_h(j)*(yq(j,1)-yqsatsurf(j))) !!jyg!!!!!! ybeta(j)=-1.*yevap(j) / & !!jyg!!!!!! & (ywake_s(j)*Kech_h_w(j)*(yq_w(j,1)-yqsatsurf_w(j))+(1.-ywake_s(j))*Kech_h_x(j)*(yq_x(j,1)-yqsatsurf_x(j))) !!jyg!!!!!!! fin jyg !!jyg!!!!! !!jyg!! !!jyg!! ENDDO !!jyg!! !!jyg!!!!! fin nrlmd le 13/06/2011 !!jyg!! IF (prt_level >=10) THEN DO j = 1, knon print*,'Chx,Chw,Ch', ycdragh_x(j), ycdragh_w(j), ycdragh(j) print*,'Khx,Khw,Kh', Kech_h_x(j), Kech_h_w(j), Kech_h(j) ! print*,'tsurf_x,tsurf_w,tsurf,t1', ytsurf_th_x(j), ytsurf_th_w(j), ytsurf_th(j), yt(j,1) print*,'tsurf_x,t1x,tsurf_w,t1w,tsurf,t1,t1_ancien', & & ytsurf_th_x(j), yt_x(j,1), ytsurf_th_w(j), yt_w(j,1), ytsurf_th(j), yt(j,1),t(j,1) print*,'qsatsurf,qsatsurf_x,qsatsurf_w', yqsatsurf(j), yqsatsurf_x(j), yqsatsurf_w(j) print*,'delta_coef,delta_flux,delta_tsurf,tau', delta_coef(j), y_delta_flux_t1(j), y_delta_tsurf(j), tau_eq(j) ENDDO DO j=1,knon print*,'fluxT_x, fluxT_w, y_flux_t1, fluxQ_x, fluxQ_w, yfluxlat, wakes' & & , y_flux_t1_x(j), y_flux_t1_w(j), y_flux_t1(j), y_flux_q1_x(j)*RLVTT, y_flux_q1_w(j)*RLVTT, yfluxlat(j), ywake_s(j) print*,'beta,ytsurf_new,yqsatsurf', ybeta(j), ytsurf_new(j), yqsatsurf(j) print*,'effusivity,facteur,cstar', effusivity, facteur,wake_cstar(j) ENDDO ENDIF !!! jyg le 07/02/2012 ENDIF ! (iflag_split .eq.1) !!! !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 CALL climb_hq_up(knon, dtime, yt, yq, & y_flux_q1, y_flux_t1, ypaprs, ypplay, & !!! jyg le 07/02/2012 AcoefH, AcoefQ, BcoefH, BcoefQ, & CcoefH, CcoefQ, DcoefH, DcoefQ, & Kcoef_hq, gama_q, gama_h, & !!! y_flux_q(:,:), y_flux_t(:,:), y_d_q(:,:), y_d_t(:,:)) ELSE !(iflag_split .eq.0) CALL climb_hq_up(knon, dtime, yt_x, yq_x, & y_flux_q1_x, y_flux_t1_x, ypaprs, ypplay, & !!! nrlmd le 02/05/2011 AcoefH_x, AcoefQ_x, BcoefH_x, BcoefQ_x, & CcoefH_x, CcoefQ_x, DcoefH_x, DcoefQ_x, & Kcoef_hq_x, gama_q_x, gama_h_x, & !!! y_flux_q_x(:,:), y_flux_t_x(:,:), y_d_q_x(:,:), y_d_t_x(:,:)) ! CALL climb_hq_up(knon, dtime, yt_w, yq_w, & y_flux_q1_w, y_flux_t1_w, ypaprs, ypplay, & !!! nrlmd le 02/05/2011 AcoefH_w, AcoefQ_w, BcoefH_w, BcoefQ_w, & CcoefH_w, CcoefQ_w, DcoefH_w, DcoefQ_w, & Kcoef_hq_w, gama_q_w, gama_h_w, & !!! y_flux_q_w(:,:), y_flux_t_w(:,:), y_d_q_w(:,:), y_d_t_w(:,:)) !!! ENDIF ! (iflag_split .eq.0) !!! !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! !!! nrlmd & jyg les 02/05/2011, 13/06/2011, 05/02/2012 CALL climb_wind_up(knon, dtime, yu, yv, y_flux_u1, y_flux_v1, & !!! jyg le 07/02/2012 AcoefU, AcoefV, BcoefU, BcoefV, & CcoefU, CcoefV, DcoefU, DcoefV, & Kcoef_m, & !!! y_flux_u, y_flux_v, y_d_u, y_d_v) y_d_t_diss(:,:)=0. IF (iflag_pbl>=20 .and. iflag_pbl<30) THEN CALL yamada_c(knon,dtime,ypaprs,ypplay & & ,yu,yv,yt,y_d_u,y_d_v,y_d_t,ycdragm,ytke,ycoefm,ycoefh,ycoefq,y_d_t_diss,yustar & & ,iflag_pbl,nsrf) ENDIF ! print*,'yamada_c OK' ELSE !(iflag_split .eq.0) CALL climb_wind_up(knon, dtime, yu_x, yv_x, y_flux_u1_x, y_flux_v1_x, & !!! nrlmd le 02/05/2011 AcoefU_x, AcoefV_x, BcoefU_x, BcoefV_x, & CcoefU_x, CcoefV_x, DcoefU_x, DcoefV_x, & Kcoef_m_x, & !!! y_flux_u_x, y_flux_v_x, y_d_u_x, y_d_v_x) ! y_d_t_diss_x(:,:)=0. IF (iflag_pbl>=20 .and. iflag_pbl<30) THEN CALL yamada_c(knon,dtime,ypaprs,ypplay & & ,yu_x,yv_x,yt_x,y_d_u_x,y_d_v_x,y_d_t_x,ycdragm_x,ytke_x,ycoefm_x,ycoefh_x & ,ycoefq_x,y_d_t_diss_x,yustar_x & & ,iflag_pbl,nsrf) ENDIF ! print*,'yamada_c OK' CALL climb_wind_up(knon, dtime, yu_w, yv_w, y_flux_u1_w, y_flux_v1_w, & !!! nrlmd le 02/05/2011 AcoefU_w, AcoefV_w, BcoefU_w, BcoefV_w, & CcoefU_w, CcoefV_w, DcoefU_w, DcoefV_w, & Kcoef_m_w, & !!! y_flux_u_w, y_flux_v_w, y_d_u_w, y_d_v_w) !!! y_d_t_diss_w(:,:)=0. IF (iflag_pbl>=20 .and. iflag_pbl<30) THEN CALL yamada_c(knon,dtime,ypaprs,ypplay & & ,yu_w,yv_w,yt_w,y_d_u_w,y_d_v_w,y_d_t_w,ycdragm_w,ytke_w,ycoefm_w,ycoefh_w & ,ycoefq_w,y_d_t_diss_w,yustar_w & & ,iflag_pbl,nsrf) ENDIF ! print*,'yamada_c OK' ! IF (prt_level >=10) THEN print *, 'After climbing up, lfuxlat_x, fluxlat_w ', & yfluxlat_x, yfluxlat_w ENDIF ! ENDIF ! (iflag_split .eq.0) !!! DO j = 1, knon y_dflux_t(j) = y_dflux_t(j) * ypct(j) y_dflux_q(j) = y_dflux_q(j) * ypct(j) ENDDO !**************************************************************************************** ! 13) Transform variables for output format : ! - Decompress ! - Multiply with pourcentage of current surface ! - Cumulate in global variable ! !**************************************************************************************** !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! DO k = 1, klev DO j = 1, knon i = ni(j) y_d_t_diss(j,k) = y_d_t_diss(j,k) * ypct(j) y_d_t(j,k) = y_d_t(j,k) * ypct(j) y_d_q(j,k) = y_d_q(j,k) * ypct(j) y_d_u(j,k) = y_d_u(j,k) * ypct(j) y_d_v(j,k) = y_d_v(j,k) * ypct(j) flux_t(i,k,nsrf) = y_flux_t(j,k) flux_q(i,k,nsrf) = y_flux_q(j,k) flux_u(i,k,nsrf) = y_flux_u(j,k) flux_v(i,k,nsrf) = y_flux_v(j,k) ENDDO ENDDO ELSE !(iflag_split .eq.0) ! Tendances hors poches DO k = 1, klev DO j = 1, knon i = ni(j) y_d_t_diss_x(j,k) = y_d_t_diss_x(j,k) * ypct(j) y_d_t_x(j,k) = y_d_t_x(j,k) * ypct(j) y_d_q_x(j,k) = y_d_q_x(j,k) * ypct(j) y_d_u_x(j,k) = y_d_u_x(j,k) * ypct(j) y_d_v_x(j,k) = y_d_v_x(j,k) * ypct(j) flux_t_x(i,k,nsrf) = y_flux_t_x(j,k) flux_q_x(i,k,nsrf) = y_flux_q_x(j,k) flux_u_x(i,k,nsrf) = y_flux_u_x(j,k) flux_v_x(i,k,nsrf) = y_flux_v_x(j,k) ENDDO ENDDO ! Tendances dans les poches DO k = 1, klev DO j = 1, knon i = ni(j) y_d_t_diss_w(j,k) = y_d_t_diss_w(j,k) * ypct(j) y_d_t_w(j,k) = y_d_t_w(j,k) * ypct(j) y_d_q_w(j,k) = y_d_q_w(j,k) * ypct(j) y_d_u_w(j,k) = y_d_u_w(j,k) * ypct(j) y_d_v_w(j,k) = y_d_v_w(j,k) * ypct(j) flux_t_w(i,k,nsrf) = y_flux_t_w(j,k) flux_q_w(i,k,nsrf) = y_flux_q_w(j,k) flux_u_w(i,k,nsrf) = y_flux_u_w(j,k) flux_v_w(i,k,nsrf) = y_flux_v_w(j,k) ENDDO ENDDO ! Flux, tendances et Tke moyenne dans la maille DO k = 1, klev DO j = 1, knon i = ni(j) flux_t(i,k,nsrf) = flux_t_x(i,k,nsrf)+ywake_s(j)*(flux_t_w(i,k,nsrf)-flux_t_x(i,k,nsrf)) flux_q(i,k,nsrf) = flux_q_x(i,k,nsrf)+ywake_s(j)*(flux_q_w(i,k,nsrf)-flux_q_x(i,k,nsrf)) flux_u(i,k,nsrf) = flux_u_x(i,k,nsrf)+ywake_s(j)*(flux_u_w(i,k,nsrf)-flux_u_x(i,k,nsrf)) flux_v(i,k,nsrf) = flux_v_x(i,k,nsrf)+ywake_s(j)*(flux_v_w(i,k,nsrf)-flux_v_x(i,k,nsrf)) ENDDO ENDDO DO j=1,knon yfluxlat(j)=yfluxlat_x(j)+ywake_s(j)*(yfluxlat_w(j)-yfluxlat_x(j)) ENDDO IF (prt_level >=10) THEN print *,' nsrf, flux_t(:,1,nsrf), flux_t_x(:,1,nsrf), flux_t_w(:,1,nsrf) ', & nsrf, flux_t(:,1,nsrf), flux_t_x(:,1,nsrf), flux_t_w(:,1,nsrf) ENDIF DO k = 1, klev DO j = 1, knon y_d_t_diss(j,k) = y_d_t_diss_x(j,k)+ywake_s(j)*(y_d_t_diss_w(j,k) -y_d_t_diss_x(j,k)) y_d_t(j,k) = y_d_t_x(j,k)+ywake_s(j)*(y_d_t_w(j,k) -y_d_t_x(j,k)) y_d_q(j,k) = y_d_q_x(j,k)+ywake_s(j)*(y_d_q_w(j,k) -y_d_q_x(j,k)) y_d_u(j,k) = y_d_u_x(j,k)+ywake_s(j)*(y_d_u_w(j,k) -y_d_u_x(j,k)) y_d_v(j,k) = y_d_v_x(j,k)+ywake_s(j)*(y_d_v_w(j,k) -y_d_v_x(j,k)) ENDDO ENDDO ENDIF ! (iflag_split .eq.0) !!! ! print*,'Dans pbl OK1' !jyg< !! evap(:,nsrf) = - flux_q(:,1,nsrf) !>jyg DO j = 1, knon i = ni(j) evap(i,nsrf) = - flux_q(i,1,nsrf) !jyg d_ts(i,nsrf) = y_d_ts(j) !albedo SB >>> do k=1,nsw alb_dir(i,k,nsrf) = yalb_dir_new(j,k) alb_dif(i,k,nsrf) = yalb_dif_new(j,k) enddo !albedo SB <<< snow(i,nsrf) = ysnow(j) qsurf(i,nsrf) = yqsurf(j) z0m(i,nsrf) = yz0m(j) z0h(i,nsrf) = yz0h(j) fluxlat(i,nsrf) = yfluxlat(j) agesno(i,nsrf) = yagesno(j) cdragh(i) = cdragh(i) + ycdragh(j)*ypct(j) cdragm(i) = cdragm(i) + ycdragm(j)*ypct(j) dflux_t(i) = dflux_t(i) + y_dflux_t(j) dflux_q(i) = dflux_q(i) + y_dflux_q(j) END DO ! print*,'Dans pbl OK2' !!! jyg le 07/02/2012 IF (iflag_split .eq.1) THEN !!! !!! nrlmd le 02/05/2011 DO j = 1, knon i = ni(j) fluxlat_x(i,nsrf) = yfluxlat_x(j) fluxlat_w(i,nsrf) = yfluxlat_w(j) !!! !!! nrlmd le 13/06/2011 delta_tsurf(i,nsrf)=y_delta_tsurf(j)*ypct(j) cdragh_x(i) = cdragh_x(i) + ycdragh_x(j)*ypct(j) cdragh_w(i) = cdragh_w(i) + ycdragh_w(j)*ypct(j) cdragm_x(i) = cdragm_x(i) + ycdragm_x(j)*ypct(j) cdragm_w(i) = cdragm_w(i) + ycdragm_w(j)*ypct(j) kh(i) = kh(i) + Kech_h(j)*ypct(j) kh_x(i) = kh_x(i) + Kech_h_x(j)*ypct(j) kh_w(i) = kh_w(i) + Kech_h_w(j)*ypct(j) !!! END DO !!! ENDIF ! (iflag_split .eq.1) !!! !!! nrlmd le 02/05/2011 !!jyg le 20/02/2011 !! tke_x(:,:,nsrf)=0. !! tke_w(:,:,nsrf)=0. !!jyg le 20/02/2011 !! DO k = 1, klev+1 !! DO j = 1, knon !! i = ni(j) !! wake_dltke(i,k,nsrf) = ytke_w(j,k) - ytke_x(j,k) !! tke(i,k,nsrf) = ytke_x(j,k) + ywake_s(j)*wake_dltke(i,k,nsrf) !! ENDDO !! ENDDO !!jyg le 20/02/2011 !! DO k = 1, klev+1 !! DO j = 1, knon !! i = ni(j) !! tke(i,k,nsrf)=(1.-ywake_s(j))*tke_x(i,k,nsrf)+ywake_s(j)*tke_w(i,k,nsrf) !! ENDDO !! ENDDO !!! IF (iflag_split .eq.0) THEN DO k = 2, klev DO j = 1, knon i = ni(j) !jyg< !! tke(i,k,nsrf) = ytke(j,k) !! tke(i,k,is_ave) = tke(i,k,is_ave) + ytke(j,k)*ypct(j) tke_x(i,k,nsrf) = ytke(j,k) tke_x(i,k,is_ave) = tke_x(i,k,is_ave) + ytke(j,k)*ypct(j) !>jyg END DO END DO ELSE DO k = 2, klev DO j = 1, knon i = ni(j) wake_dltke(i,k,nsrf) = ytke_w(j,k) - ytke_x(j,k) !jyg< !! tke(i,k,nsrf) = ytke_x(j,k) + ywake_s(j)*wake_dltke(i,k,nsrf) !! tke(i,k,is_ave) = tke(i,k,is_ave) + tke(i,k,nsrf)*ypct(j) tke_x(i,k,nsrf) = ytke_x(j,k) tke_x(i,k,is_ave) = tke_x(i,k,is_ave) + tke_x(i,k,nsrf)*ypct(j) wake_dltke(i,k,is_ave) = wake_dltke(i,k,is_ave) + wake_dltke(i,k,nsrf)*ypct(j) !>jyg ENDDO ENDDO ENDIF ! (iflag_split .eq.0) !!! DO k = 2, klev DO j = 1, knon i = ni(j) zcoefh(i,k,nsrf) = ycoefh(j,k) zcoefm(i,k,nsrf) = ycoefm(j,k) zcoefh(i,k,is_ave) = zcoefh(i,k,is_ave) + ycoefh(j,k)*ypct(j) zcoefm(i,k,is_ave) = zcoefm(i,k,is_ave) + ycoefm(j,k)*ypct(j) END DO END DO ! print*,'Dans pbl OK3' IF ( nsrf .EQ. is_ter ) THEN DO j = 1, knon i = ni(j) qsol(i) = yqsol(j) END DO END IF !jyg< !! ftsoil(:,:,nsrf) = 0. !>jyg DO k = 1, nsoilmx DO j = 1, knon i = ni(j) ftsoil(i, k, nsrf) = ytsoil(j,k) END DO END DO !!! jyg le 07/02/2012 IF (iflag_split .eq.1) THEN !!! !!! nrlmd+jyg le 02/05/2011 et le 20/02/2012 DO k = 1, klev DO j = 1, knon i = ni(j) d_t_diss_x(i,k) = d_t_diss_x(i,k) + y_d_t_diss_x(j,k) d_t_x(i,k) = d_t_x(i,k) + y_d_t_x(j,k) d_q_x(i,k) = d_q_x(i,k) + y_d_q_x(j,k) d_u_x(i,k) = d_u_x(i,k) + y_d_u_x(j,k) d_v_x(i,k) = d_v_x(i,k) + y_d_v_x(j,k) ! d_t_diss_w(i,k) = d_t_diss_w(i,k) + y_d_t_diss_w(j,k) d_t_w(i,k) = d_t_w(i,k) + y_d_t_w(j,k) d_q_w(i,k) = d_q_w(i,k) + y_d_q_w(j,k) d_u_w(i,k) = d_u_w(i,k) + y_d_u_w(j,k) d_v_w(i,k) = d_v_w(i,k) + y_d_v_w(j,k) ! !! d_wake_dlt(i,k) = d_wake_dlt(i,k) + y_d_t_w(i,k)-y_d_t_x(i,k) !! d_wake_dlq(i,k) = d_wake_dlq(i,k) + y_d_q_w(i,k)-y_d_q_x(i,k) END DO END DO !!! ENDIF ! (iflag_split .eq.1) !!! DO k = 1, klev DO j = 1, knon i = ni(j) d_t_diss(i,k) = d_t_diss(i,k) + y_d_t_diss(j,k) d_t(i,k) = d_t(i,k) + y_d_t(j,k) d_q(i,k) = d_q(i,k) + y_d_q(j,k) d_u(i,k) = d_u(i,k) + y_d_u(j,k) d_v(i,k) = d_v(i,k) + y_d_v(j,k) END DO END DO ! print*,'Dans pbl OK4' IF (prt_level >=10) THEN print *, 'pbl_surface tendencies for w: d_t_w, d_t_x, d_t ', & d_t_w(:,1), d_t_x(:,1), d_t(:,1) ENDIF !**************************************************************************************** ! 14) Calculate the temperature and relative humidity at 2m and the wind at 10m ! Call HBTM ! !**************************************************************************************** !!! ! #undef T2m #define T2m #ifdef T2m ! Calculations of diagnostic t,q at 2m and u, v at 10m ! print*,'Dans pbl OK41' ! print*,'tair1,yt(:,1),y_d_t(:,1)' ! print*, tair1,yt(:,1),y_d_t(:,1) !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN DO j=1, knon uzon(j) = yu(j,1) + y_d_u(j,1) vmer(j) = yv(j,1) + y_d_v(j,1) tair1(j) = yt(j,1) + y_d_t(j,1) + y_d_t_diss(j,1) qair1(j) = yq(j,1) + y_d_q(j,1) zgeo1(j) = RD * tair1(j) / (0.5*(ypaprs(j,1)+ypplay(j,1))) & * (ypaprs(j,1)-ypplay(j,1)) tairsol(j) = yts(j) + y_d_ts(j) qairsol(j) = yqsurf(j) END DO ELSE ! (iflag_split .eq.0) DO j=1, knon uzon_x(j) = yu_x(j,1) + y_d_u_x(j,1) vmer_x(j) = yv_x(j,1) + y_d_v_x(j,1) tair1_x(j) = yt_x(j,1) + y_d_t_x(j,1) + y_d_t_diss_x(j,1) qair1_x(j) = yq_x(j,1) + y_d_q_x(j,1) zgeo1_x(j) = RD * tair1_x(j) / (0.5*(ypaprs(j,1)+ypplay(j,1))) & * (ypaprs(j,1)-ypplay(j,1)) tairsol(j) = yts(j) + y_d_ts(j) tairsol_x(j) = tairsol(j) - ywake_s(j)*y_delta_tsurf(j) qairsol(j) = yqsurf(j) END DO DO j=1, knon uzon_w(j) = yu_w(j,1) + y_d_u_w(j,1) vmer_w(j) = yv_w(j,1) + y_d_v_w(j,1) tair1_w(j) = yt_w(j,1) + y_d_t_w(j,1) + y_d_t_diss_w(j,1) qair1_w(j) = yq_w(j,1) + y_d_q_w(j,1) zgeo1_w(j) = RD * tair1_w(j) / (0.5*(ypaprs(j,1)+ypplay(j,1))) & * (ypaprs(j,1)-ypplay(j,1)) tairsol_w(j) = tairsol(j) + (1.- ywake_s(j))*y_delta_tsurf(j) qairsol(j) = yqsurf(j) END DO !!! ENDIF ! (iflag_split .eq.0) !!! DO j=1, knon i = ni(j) rugo1(j) = yz0m(j) IF(nsrf.EQ.is_oce) THEN rugo1(j) = z0m(i,nsrf) ENDIF psfce(j)=ypaprs(j,1) patm(j)=ypplay(j,1) END DO ! print*,'Dans pbl OK42A' ! print*,'tair1,yt(:,1),y_d_t(:,1)' ! print*, tair1,yt(:,1),y_d_t(:,1) ! Calculate the temperature et relative humidity at 2m and the wind at 10m !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN CALL stdlevvar(klon, knon, nsrf, zxli, & uzon, vmer, tair1, qair1, zgeo1, & tairsol, qairsol, rugo1, rugo1, psfce, patm, & yt2m, yq2m, yt10m, yq10m, yu10m, yustar) ELSE !(iflag_split .eq.0) CALL stdlevvar(klon, knon, nsrf, zxli, & uzon_x, vmer_x, tair1_x, qair1_x, zgeo1_x, & tairsol_x, qairsol, rugo1, rugo1, psfce, patm, & yt2m_x, yq2m_x, yt10m_x, yq10m_x, yu10m_x, yustar_x) CALL stdlevvar(klon, knon, nsrf, zxli, & uzon_w, vmer_w, tair1_w, qair1_w, zgeo1_w, & tairsol_w, qairsol, rugo1, rugo1, psfce, patm, & yt2m_w, yq2m_w, yt10m_w, yq10m_w, yu10m_w, yustar_w) !!! ENDIF ! (iflag_split .eq.0) !!! !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN DO j=1, knon i = ni(j) t2m(i,nsrf)=yt2m(j) q2m(i,nsrf)=yq2m(j) ! u10m, v10m : composantes du vent a 10m sans spirale de Ekman ustar(i,nsrf)=yustar(j) u10m(i,nsrf)=(yu10m(j) * uzon(j))/SQRT(uzon(j)**2+vmer(j)**2) v10m(i,nsrf)=(yu10m(j) * vmer(j))/SQRT(uzon(j)**2+vmer(j)**2) END DO ELSE !(iflag_split .eq.0) DO j=1, knon i = ni(j) t2m_x(i,nsrf)=yt2m_x(j) q2m_x(i,nsrf)=yq2m_x(j) ! u10m, v10m : composantes du vent a 10m sans spirale de Ekman ustar_x(i,nsrf)=yustar_x(j) u10m_x(i,nsrf)=(yu10m_x(j) * uzon_x(j))/SQRT(uzon_x(j)**2+vmer_x(j)**2) v10m_x(i,nsrf)=(yu10m_x(j) * vmer_x(j))/SQRT(uzon_x(j)**2+vmer_x(j)**2) END DO DO j=1, knon i = ni(j) t2m_w(i,nsrf)=yt2m_w(j) q2m_w(i,nsrf)=yq2m_w(j) ! u10m, v10m : composantes du vent a 10m sans spirale de Ekman ustar_w(i,nsrf)=yustar_w(j) u10m_w(i,nsrf)=(yu10m_w(j) * uzon_w(j))/SQRT(uzon_w(j)**2+vmer_w(j)**2) v10m_w(i,nsrf)=(yu10m_w(j) * vmer_w(j))/SQRT(uzon_w(j)**2+vmer_w(j)**2) ! ustar(i,nsrf) = ustar_x(i,nsrf) + wake_s(i)*(ustar_w(i,nsrf)-ustar_x(i,nsrf)) u10m(i,nsrf) = u10m_x(i,nsrf) + wake_s(i)*(u10m_w(i,nsrf)-u10m_x(i,nsrf)) v10m(i,nsrf) = v10m_x(i,nsrf) + wake_s(i)*(v10m_w(i,nsrf)-v10m_x(i,nsrf)) END DO !!! ENDIF ! (iflag_split .eq.0) !!! ! print*,'Dans pbl OK43' !IM Calcule de l'humidite relative a 2m (rh2m) pour diagnostique !IM Ajoute dependance type surface IF (thermcep) THEN !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN DO j = 1, knon i=ni(j) zdelta1 = MAX(0.,SIGN(1., rtt-yt2m(j) )) zx_qs1 = r2es * FOEEW(yt2m(j),zdelta1)/paprs(i,1) zx_qs1 = MIN(0.5,zx_qs1) zcor1 = 1./(1.-RETV*zx_qs1) zx_qs1 = zx_qs1*zcor1 rh2m(i) = rh2m(i) + yq2m(j)/zx_qs1 * pctsrf(i,nsrf) qsat2m(i) = qsat2m(i) + zx_qs1 * pctsrf(i,nsrf) END DO ELSE ! (iflag_split .eq.0) DO j = 1, knon i=ni(j) zdelta1 = MAX(0.,SIGN(1., rtt-yt2m_x(j) )) zx_qs1 = r2es * FOEEW(yt2m_x(j),zdelta1)/paprs(i,1) zx_qs1 = MIN(0.5,zx_qs1) zcor1 = 1./(1.-RETV*zx_qs1) zx_qs1 = zx_qs1*zcor1 rh2m_x(i) = rh2m_x(i) + yq2m_x(j)/zx_qs1 * pctsrf(i,nsrf) qsat2m_x(i) = qsat2m_x(i) + zx_qs1 * pctsrf(i,nsrf) END DO DO j = 1, knon i=ni(j) zdelta1 = MAX(0.,SIGN(1., rtt-yt2m_w(j) )) zx_qs1 = r2es * FOEEW(yt2m_w(j),zdelta1)/paprs(i,1) zx_qs1 = MIN(0.5,zx_qs1) zcor1 = 1./(1.-RETV*zx_qs1) zx_qs1 = zx_qs1*zcor1 rh2m_w(i) = rh2m_w(i) + yq2m_w(j)/zx_qs1 * pctsrf(i,nsrf) qsat2m_w(i) = qsat2m_w(i) + zx_qs1 * pctsrf(i,nsrf) END DO !!! ENDIF ! (iflag_split .eq.0) !!! END IF ! IF (prt_level >=10) THEN print *, 'T2m, q2m, RH2m ', & t2m, q2m, rh2m ENDIF ! print*,'OK pbl 5' ! !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN CALL hbtm(knon, ypaprs, ypplay, & yt2m,yt10m,yq2m,yq10m,yustar,ywstar, & y_flux_t,y_flux_q,yu,yv,yt,yq, & ypblh,ycapCL,yoliqCL,ycteiCL,ypblT, & ytherm,ytrmb1,ytrmb2,ytrmb3,ylcl) IF (prt_level >=10) THEN print *,' Arg. de HBTM: yt2m ',yt2m print *,' Arg. de HBTM: yt10m ',yt10m print *,' Arg. de HBTM: yq2m ',yq2m print *,' Arg. de HBTM: yq10m ',yq10m print *,' Arg. de HBTM: yustar ',yustar print *,' Arg. de HBTM: y_flux_t ',y_flux_t print *,' Arg. de HBTM: y_flux_q ',y_flux_q print *,' Arg. de HBTM: yu ',yu print *,' Arg. de HBTM: yv ',yv print *,' Arg. de HBTM: yt ',yt print *,' Arg. de HBTM: yq ',yq ENDIF ELSE ! (iflag_split .eq.0) CALL HBTM(knon, ypaprs, ypplay, & yt2m_x,yt10m_x,yq2m_x,yq10m_x,yustar_x,ywstar_x, & y_flux_t_x,y_flux_q_x,yu_x,yv_x,yt_x,yq_x, & ypblh_x,ycapCL_x,yoliqCL_x,ycteiCL_x,ypblT_x, & ytherm_x,ytrmb1_x,ytrmb2_x,ytrmb3_x,ylcl_x) IF (prt_level >=10) THEN print *,' Arg. de HBTM: yt2m_x ',yt2m_x print *,' Arg. de HBTM: yt10m_x ',yt10m_x print *,' Arg. de HBTM: yq2m_x ',yq2m_x print *,' Arg. de HBTM: yq10m_x ',yq10m_x print *,' Arg. de HBTM: yustar_x ',yustar_x print *,' Arg. de HBTM: y_flux_t_x ',y_flux_t_x print *,' Arg. de HBTM: y_flux_q_x ',y_flux_q_x print *,' Arg. de HBTM: yu_x ',yu_x print *,' Arg. de HBTM: yv_x ',yv_x print *,' Arg. de HBTM: yt_x ',yt_x print *,' Arg. de HBTM: yq_x ',yq_x ENDIF CALL HBTM(knon, ypaprs, ypplay, & yt2m_w,yt10m_w,yq2m_w,yq10m_w,yustar_w,ywstar_w, & y_flux_t_w,y_flux_q_w,yu_w,yv_w,yt_w,yq_w, & ypblh_w,ycapCL_w,yoliqCL_w,ycteiCL_w,ypblT_w, & ytherm_w,ytrmb1_w,ytrmb2_w,ytrmb3_w,ylcl_w) !!! ENDIF ! (iflag_split .eq.0) !!! !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN !!! DO j=1, knon i = ni(j) pblh(i,nsrf) = ypblh(j) wstar(i,nsrf) = ywstar(j) plcl(i,nsrf) = ylcl(j) capCL(i,nsrf) = ycapCL(j) oliqCL(i,nsrf) = yoliqCL(j) cteiCL(i,nsrf) = ycteiCL(j) pblT(i,nsrf) = ypblT(j) therm(i,nsrf) = ytherm(j) trmb1(i,nsrf) = ytrmb1(j) trmb2(i,nsrf) = ytrmb2(j) trmb3(i,nsrf) = ytrmb3(j) END DO IF (prt_level >=10) THEN print *, 'After HBTM: pblh ', pblh print *, 'After HBTM: plcl ', plcl print *, 'After HBTM: cteiCL ', cteiCL ENDIF ELSE !(iflag_split .eq.0) DO j=1, knon i = ni(j) pblh_x(i,nsrf) = ypblh_x(j) wstar_x(i,nsrf) = ywstar_x(j) plcl_x(i,nsrf) = ylcl_x(j) capCL_x(i,nsrf) = ycapCL_x(j) oliqCL_x(i,nsrf) = yoliqCL_x(j) cteiCL_x(i,nsrf) = ycteiCL_x(j) pblT_x(i,nsrf) = ypblT_x(j) therm_x(i,nsrf) = ytherm_x(j) trmb1_x(i,nsrf) = ytrmb1_x(j) trmb2_x(i,nsrf) = ytrmb2_x(j) trmb3_x(i,nsrf) = ytrmb3_x(j) END DO IF (prt_level >=10) THEN print *, 'After HBTM: pblh_x ', pblh_x print *, 'After HBTM: plcl_x ', plcl_x print *, 'After HBTM: cteiCL_x ', cteiCL_x ENDIF DO j=1, knon i = ni(j) pblh_w(i,nsrf) = ypblh_w(j) wstar_w(i,nsrf) = ywstar_w(j) plcl_w(i,nsrf) = ylcl_w(j) capCL_w(i,nsrf) = ycapCL_w(j) oliqCL_w(i,nsrf) = yoliqCL_w(j) cteiCL_w(i,nsrf) = ycteiCL_w(j) pblT_w(i,nsrf) = ypblT_w(j) therm_w(i,nsrf) = ytherm_w(j) trmb1_w(i,nsrf) = ytrmb1_w(j) trmb2_w(i,nsrf) = ytrmb2_w(j) trmb3_w(i,nsrf) = ytrmb3_w(j) END DO IF (prt_level >=10) THEN print *, 'After HBTM: pblh_w ', pblh_w print *, 'After HBTM: plcl_w ', plcl_w print *, 'After HBTM: cteiCL_w ', cteiCL_w ENDIF !!! ENDIF ! (iflag_split .eq.0) !!! ! print*,'OK pbl 6' #else ! T2m not defined ! No calculation PRINT*,' Warning !!! No T2m calculation. Output is set to zero.' #endif !**************************************************************************************** ! 15) End of loop over different surfaces ! !**************************************************************************************** END DO loop_nbsrf !**************************************************************************************** ! 16) Calculate the mean value over all sub-surfaces for some variables ! !**************************************************************************************** z0m(:,nbsrf+1) = 0.0 z0h(:,nbsrf+1) = 0.0 DO nsrf = 1, nbsrf DO i = 1, klon z0m(i,nbsrf+1) = z0m(i,nbsrf+1) + z0m(i,nsrf)*pctsrf(i,nsrf) z0h(i,nbsrf+1) = z0h(i,nbsrf+1) + z0h(i,nsrf)*pctsrf(i,nsrf) ENDDO ENDDO ! print*,'OK pbl 7' zxfluxt(:,:) = 0.0 ; zxfluxq(:,:) = 0.0 zxfluxu(:,:) = 0.0 ; zxfluxv(:,:) = 0.0 zxfluxt_x(:,:) = 0.0 ; zxfluxq_x(:,:) = 0.0 zxfluxu_x(:,:) = 0.0 ; zxfluxv_x(:,:) = 0.0 zxfluxt_w(:,:) = 0.0 ; zxfluxq_w(:,:) = 0.0 zxfluxu_w(:,:) = 0.0 ; zxfluxv_w(:,:) = 0.0 !!! jyg le 07/02/2012 IF (iflag_split .eq.1) THEN !!! !!! nrlmd & jyg les 02/05/2011, 05/02/2012 DO nsrf = 1, nbsrf DO k = 1, klev DO i = 1, klon zxfluxt_x(i,k) = zxfluxt_x(i,k) + flux_t_x(i,k,nsrf) * pctsrf(i,nsrf) zxfluxq_x(i,k) = zxfluxq_x(i,k) + flux_q_x(i,k,nsrf) * pctsrf(i,nsrf) zxfluxu_x(i,k) = zxfluxu_x(i,k) + flux_u_x(i,k,nsrf) * pctsrf(i,nsrf) zxfluxv_x(i,k) = zxfluxv_x(i,k) + flux_v_x(i,k,nsrf) * pctsrf(i,nsrf) ! zxfluxt_w(i,k) = zxfluxt_w(i,k) + flux_t_w(i,k,nsrf) * pctsrf(i,nsrf) zxfluxq_w(i,k) = zxfluxq_w(i,k) + flux_q_w(i,k,nsrf) * pctsrf(i,nsrf) zxfluxu_w(i,k) = zxfluxu_w(i,k) + flux_u_w(i,k,nsrf) * pctsrf(i,nsrf) zxfluxv_w(i,k) = zxfluxv_w(i,k) + flux_v_w(i,k,nsrf) * pctsrf(i,nsrf) END DO END DO END DO DO i = 1, klon zxsens_x(i) = - zxfluxt_x(i,1) zxsens_w(i) = - zxfluxt_w(i,1) END DO !!! ENDIF ! (iflag_split .eq.1) !!! DO nsrf = 1, nbsrf DO k = 1, klev DO i = 1, klon zxfluxt(i,k) = zxfluxt(i,k) + flux_t(i,k,nsrf) * pctsrf(i,nsrf) zxfluxq(i,k) = zxfluxq(i,k) + flux_q(i,k,nsrf) * pctsrf(i,nsrf) zxfluxu(i,k) = zxfluxu(i,k) + flux_u(i,k,nsrf) * pctsrf(i,nsrf) zxfluxv(i,k) = zxfluxv(i,k) + flux_v(i,k,nsrf) * pctsrf(i,nsrf) END DO END DO END DO DO i = 1, klon zxsens(i) = - zxfluxt(i,1) ! flux de chaleur sensible au sol zxevap(i) = - zxfluxq(i,1) ! flux d'evaporation au sol fder_print(i) = fder(i) + dflux_t(i) + dflux_q(i) ENDDO !!! ! ! Incrementer la temperature du sol ! zxtsol(:) = 0.0 ; zxfluxlat(:) = 0.0 zt2m(:) = 0.0 ; zq2m(:) = 0.0 zustar(:)=0.0 ; zu10m(:) = 0.0 ; zv10m(:) = 0.0 s_pblh(:) = 0.0 ; s_plcl(:) = 0.0 !!! jyg le 07/02/2012 s_pblh_x(:) = 0.0 ; s_plcl_x(:) = 0.0 s_pblh_w(:) = 0.0 ; s_plcl_w(:) = 0.0 !!! s_capCL(:) = 0.0 ; s_oliqCL(:) = 0.0 s_cteiCL(:) = 0.0; s_pblT(:) = 0.0 s_therm(:) = 0.0 ; s_trmb1(:) = 0.0 s_trmb2(:) = 0.0 ; s_trmb3(:) = 0.0 wstar(:,is_ave)=0. ! print*,'OK pbl 9' !!! nrlmd le 02/05/2011 zxfluxlat_x(:) = 0.0 ; zxfluxlat_w(:) = 0.0 !!! DO nsrf = 1, nbsrf DO i = 1, klon ts(i,nsrf) = ts(i,nsrf) + d_ts(i,nsrf) wfbils(i,nsrf) = ( solsw(i,nsrf) + sollw(i,nsrf) & + flux_t(i,1,nsrf) + fluxlat(i,nsrf) ) * pctsrf(i,nsrf) wfbilo(i,nsrf) = (evap(i,nsrf) - (rain_f(i) + snow_f(i))) * & pctsrf(i,nsrf) zxtsol(i) = zxtsol(i) + ts(i,nsrf) * pctsrf(i,nsrf) zxfluxlat(i) = zxfluxlat(i) + fluxlat(i,nsrf) * pctsrf(i,nsrf) END DO END DO !!! jyg le 07/02/2012 IF (iflag_split .eq.0) THEN DO nsrf = 1, nbsrf DO i = 1, klon zt2m(i) = zt2m(i) + t2m(i,nsrf) * pctsrf(i,nsrf) zq2m(i) = zq2m(i) + q2m(i,nsrf) * pctsrf(i,nsrf) zustar(i) = zustar(i) + ustar(i,nsrf) * pctsrf(i,nsrf) wstar(i,is_ave)=wstar(i,is_ave)+wstar(i,nsrf)*pctsrf(i,nsrf) zu10m(i) = zu10m(i) + u10m(i,nsrf) * pctsrf(i,nsrf) zv10m(i) = zv10m(i) + v10m(i,nsrf) * pctsrf(i,nsrf) s_pblh(i) = s_pblh(i) + pblh(i,nsrf) * pctsrf(i,nsrf) s_plcl(i) = s_plcl(i) + plcl(i,nsrf) * pctsrf(i,nsrf) s_capCL(i) = s_capCL(i) + capCL(i,nsrf) * pctsrf(i,nsrf) s_oliqCL(i) = s_oliqCL(i) + oliqCL(i,nsrf)* pctsrf(i,nsrf) s_cteiCL(i) = s_cteiCL(i) + cteiCL(i,nsrf)* pctsrf(i,nsrf) s_pblT(i) = s_pblT(i) + pblT(i,nsrf) * pctsrf(i,nsrf) s_therm(i) = s_therm(i) + therm(i,nsrf) * pctsrf(i,nsrf) s_trmb1(i) = s_trmb1(i) + trmb1(i,nsrf) * pctsrf(i,nsrf) s_trmb2(i) = s_trmb2(i) + trmb2(i,nsrf) * pctsrf(i,nsrf) s_trmb3(i) = s_trmb3(i) + trmb3(i,nsrf) * pctsrf(i,nsrf) END DO END DO ELSE !(iflag_split .eq.0) DO nsrf = 1, nbsrf DO i = 1, klon !!! nrlmd le 02/05/2011 zxfluxlat_x(i) = zxfluxlat_x(i) + fluxlat_x(i,nsrf) * pctsrf(i,nsrf) zxfluxlat_w(i) = zxfluxlat_w(i) + fluxlat_w(i,nsrf) * pctsrf(i,nsrf) !!! !!! jyg le 08/02/2012 !! Pour le moment, on sort les valeurs dans (x) et (w) de pblh et de plcl ; !! pour zt2m, on fait la moyenne surfacique sur les sous-surfaces ; !! pour qsat2m, on fait la moyenne surfacique sur (x) et (w) ; !! pour les autres variables, on sort les valeurs de la region (x). zt2m(i) = zt2m(i) + (t2m_x(i,nsrf)+wake_s(i)*(t2m_w(i,nsrf)-t2m_x(i,nsrf))) * pctsrf(i,nsrf) zq2m(i) = zq2m(i) + q2m_x(i,nsrf) * pctsrf(i,nsrf) zustar(i) = zustar(i) + ustar_x(i,nsrf) * pctsrf(i,nsrf) wstar(i,is_ave)=wstar(i,is_ave)+wstar_x(i,nsrf)*pctsrf(i,nsrf) zu10m(i) = zu10m(i) + u10m_x(i,nsrf) * pctsrf(i,nsrf) zv10m(i) = zv10m(i) + v10m_x(i,nsrf) * pctsrf(i,nsrf) ! s_pblh(i) = s_pblh(i) + pblh_x(i,nsrf) * pctsrf(i,nsrf) s_pblh_x(i) = s_pblh_x(i) + pblh_x(i,nsrf) * pctsrf(i,nsrf) s_pblh_w(i) = s_pblh_w(i) + pblh_w(i,nsrf) * pctsrf(i,nsrf) ! s_plcl(i) = s_plcl(i) + plcl_x(i,nsrf) * pctsrf(i,nsrf) s_plcl_x(i) = s_plcl_x(i) + plcl_x(i,nsrf) * pctsrf(i,nsrf) s_plcl_w(i) = s_plcl_w(i) + plcl_w(i,nsrf) * pctsrf(i,nsrf) ! s_capCL(i) = s_capCL(i) + capCL_x(i,nsrf) * pctsrf(i,nsrf) s_oliqCL(i) = s_oliqCL(i) + oliqCL_x(i,nsrf)* pctsrf(i,nsrf) s_cteiCL(i) = s_cteiCL(i) + cteiCL_x(i,nsrf)* pctsrf(i,nsrf) s_pblT(i) = s_pblT(i) + pblT_x(i,nsrf) * pctsrf(i,nsrf) s_therm(i) = s_therm(i) + therm_x(i,nsrf) * pctsrf(i,nsrf) s_trmb1(i) = s_trmb1(i) + trmb1_x(i,nsrf) * pctsrf(i,nsrf) s_trmb2(i) = s_trmb2(i) + trmb2_x(i,nsrf) * pctsrf(i,nsrf) s_trmb3(i) = s_trmb3(i) + trmb3_x(i,nsrf) * pctsrf(i,nsrf) END DO END DO DO i = 1, klon qsat2m(i)= qsat2m_x(i)+ wake_s(i)*(qsat2m_x(i)-qsat2m_w(i)) END DO !!! ENDIF ! (iflag_split .eq.0) !!! IF (check) THEN amn=MIN(ts(1,is_ter),1000.) amx=MAX(ts(1,is_ter),-1000.) DO i=2, klon amn=MIN(ts(i,is_ter),amn) amx=MAX(ts(i,is_ter),amx) ENDDO PRINT*,' debut apres d_ts min max ftsol(ts)',itap,amn,amx ENDIF !jg ? !!$! !!$! If a sub-surface does not exsist for a grid point, the mean value for all !!$! sub-surfaces is distributed. !!$! !!$ DO nsrf = 1, nbsrf !!$ DO i = 1, klon !!$ IF ((pctsrf_new(i,nsrf) .LT. epsfra) .OR. (t2m(i,nsrf).EQ.0.)) THEN !!$ ts(i,nsrf) = zxtsol(i) !!$ t2m(i,nsrf) = zt2m(i) !!$ q2m(i,nsrf) = zq2m(i) !!$ u10m(i,nsrf) = zu10m(i) !!$ v10m(i,nsrf) = zv10m(i) !!$ !!$! Les variables qui suivent sont plus utilise, donc peut-etre pas la peine a les mettre ajour !!$ pblh(i,nsrf) = s_pblh(i) !!$ plcl(i,nsrf) = s_plcl(i) !!$ capCL(i,nsrf) = s_capCL(i) !!$ oliqCL(i,nsrf) = s_oliqCL(i) !!$ cteiCL(i,nsrf) = s_cteiCL(i) !!$ pblT(i,nsrf) = s_pblT(i) !!$ therm(i,nsrf) = s_therm(i) !!$ trmb1(i,nsrf) = s_trmb1(i) !!$ trmb2(i,nsrf) = s_trmb2(i) !!$ trmb3(i,nsrf) = s_trmb3(i) !!$ ENDIF !!$ ENDDO !!$ ENDDO DO i = 1, klon fder(i) = - 4.0*RSIGMA*zxtsol(i)**3 ENDDO zxqsurf(:) = 0.0 zxsnow(:) = 0.0 DO nsrf = 1, nbsrf DO i = 1, klon zxqsurf(i) = zxqsurf(i) + qsurf(i,nsrf) * pctsrf(i,nsrf) zxsnow(i) = zxsnow(i) + snow(i,nsrf) * pctsrf(i,nsrf) END DO END DO ! Premier niveau de vent sortie dans physiq.F zu1(:) = u(:,1) zv1(:) = v(:,1) END SUBROUTINE pbl_surface ! !**************************************************************************************** ! SUBROUTINE pbl_surface_final(fder_rst, snow_rst, qsurf_rst, ftsoil_rst) USE indice_sol_mod INCLUDE "dimsoil.h" ! Ouput variables !**************************************************************************************** REAL, DIMENSION(klon), INTENT(OUT) :: fder_rst REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: snow_rst REAL, DIMENSION(klon, nbsrf), INTENT(OUT) :: qsurf_rst REAL, DIMENSION(klon, nsoilmx, nbsrf), INTENT(OUT) :: ftsoil_rst !**************************************************************************************** ! Return module variables for writing to restart file ! !**************************************************************************************** fder_rst(:) = fder(:) snow_rst(:,:) = snow(:,:) qsurf_rst(:,:) = qsurf(:,:) ftsoil_rst(:,:,:) = ftsoil(:,:,:) !**************************************************************************************** ! Deallocate module variables ! !**************************************************************************************** ! DEALLOCATE(qsol, fder, snow, qsurf, evap, rugos, agesno, ftsoil) IF (ALLOCATED(fder)) DEALLOCATE(fder) IF (ALLOCATED(snow)) DEALLOCATE(snow) IF (ALLOCATED(qsurf)) DEALLOCATE(qsurf) IF (ALLOCATED(ftsoil)) DEALLOCATE(ftsoil) END SUBROUTINE pbl_surface_final ! !**************************************************************************************** ! !albedo SB >>> SUBROUTINE pbl_surface_newfrac(itime, pctsrf_new, pctsrf_old, & evap, z0m, z0h, agesno, & tsurf,alb_dir,alb_dif, ustar, u10m, v10m, tke) !albedo SB <<< ! Give default values where new fraction has appread USE indice_sol_mod INCLUDE "dimsoil.h" INCLUDE "clesphys.h" INCLUDE "compbl.h" ! Input variables !**************************************************************************************** INTEGER, INTENT(IN) :: itime REAL, DIMENSION(klon,nbsrf), INTENT(IN) :: pctsrf_new, pctsrf_old ! InOutput variables !**************************************************************************************** REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: tsurf !albedo SB >>> REAL, DIMENSION(klon,nsw,nbsrf), INTENT(INOUT) :: alb_dir, alb_dif INTEGER :: k !albedo SB <<< REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: ustar,u10m, v10m REAL, DIMENSION(klon,nbsrf), INTENT(INOUT) :: evap, agesno REAL, DIMENSION(klon,nbsrf+1), INTENT(INOUT) :: z0m,z0h REAL, DIMENSION(klon,klev+1,nbsrf+1), INTENT(INOUT) :: tke ! Local variables !**************************************************************************************** INTEGER :: nsrf, nsrf_comp1, nsrf_comp2, nsrf_comp3, i CHARACTER(len=80) :: abort_message CHARACTER(len=20) :: modname = 'pbl_surface_newfrac' INTEGER, DIMENSION(nbsrf) :: nfois=0, mfois=0, pfois=0 ! ! All at once !! !**************************************************************************************** DO nsrf = 1, nbsrf ! First decide complement sub-surfaces SELECT CASE (nsrf) CASE(is_oce) nsrf_comp1=is_sic nsrf_comp2=is_ter nsrf_comp3=is_lic CASE(is_sic) nsrf_comp1=is_oce nsrf_comp2=is_ter nsrf_comp3=is_lic CASE(is_ter) nsrf_comp1=is_lic nsrf_comp2=is_oce nsrf_comp3=is_sic CASE(is_lic) nsrf_comp1=is_ter nsrf_comp2=is_oce nsrf_comp3=is_sic END SELECT ! Initialize all new fractions DO i=1, klon IF (pctsrf_new(i,nsrf) > 0. .AND. pctsrf_old(i,nsrf) == 0.) THEN IF (pctsrf_old(i,nsrf_comp1) > 0.) THEN ! Use the complement sub-surface, keeping the continents unchanged qsurf(i,nsrf) = qsurf(i,nsrf_comp1) evap(i,nsrf) = evap(i,nsrf_comp1) z0m(i,nsrf) = z0m(i,nsrf_comp1) z0h(i,nsrf) = z0h(i,nsrf_comp1) tsurf(i,nsrf) = tsurf(i,nsrf_comp1) !albedo SB >>> DO k=1,nsw alb_dir(i,k,nsrf)=alb_dir(i,k,nsrf_comp1) alb_dif(i,k,nsrf)=alb_dif(i,k,nsrf_comp1) ENDDO !albedo SB <<< ustar(i,nsrf) = ustar(i,nsrf_comp1) u10m(i,nsrf) = u10m(i,nsrf_comp1) v10m(i,nsrf) = v10m(i,nsrf_comp1) if (iflag_pbl > 1) then tke(i,:,nsrf) = tke(i,:,nsrf_comp1) endif mfois(nsrf) = mfois(nsrf) + 1 ELSE ! The continents have changed. The new fraction receives the mean sum of the existent fractions qsurf(i,nsrf) = qsurf(i,nsrf_comp2)*pctsrf_old(i,nsrf_comp2) + qsurf(i,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) evap(i,nsrf) = evap(i,nsrf_comp2) *pctsrf_old(i,nsrf_comp2) + evap(i,nsrf_comp3) *pctsrf_old(i,nsrf_comp3) z0m(i,nsrf) = z0m(i,nsrf_comp2)*pctsrf_old(i,nsrf_comp2) + z0m(i,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) z0h(i,nsrf) = z0h(i,nsrf_comp2)*pctsrf_old(i,nsrf_comp2) + z0h(i,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) tsurf(i,nsrf) = tsurf(i,nsrf_comp2)*pctsrf_old(i,nsrf_comp2) + tsurf(i,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) !albedo SB >>> DO k=1,nsw alb_dir(i,k,nsrf)=alb_dir(i,k,nsrf_comp2)*pctsrf_old(i,nsrf_comp2)+& alb_dir(i,k,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) alb_dif(i,k,nsrf)=alb_dif(i,k,nsrf_comp2)*pctsrf_old(i,nsrf_comp2)+& alb_dif(i,k,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) ENDDO !albedo SB <<< ustar(i,nsrf) = ustar(i,nsrf_comp2) *pctsrf_old(i,nsrf_comp2) + ustar(i,nsrf_comp3) *pctsrf_old(i,nsrf_comp3) u10m(i,nsrf) = u10m(i,nsrf_comp2) *pctsrf_old(i,nsrf_comp2) + u10m(i,nsrf_comp3) *pctsrf_old(i,nsrf_comp3) v10m(i,nsrf) = v10m(i,nsrf_comp2) *pctsrf_old(i,nsrf_comp2) + v10m(i,nsrf_comp3) *pctsrf_old(i,nsrf_comp3) if (iflag_pbl > 1) then tke(i,:,nsrf) = tke(i,:,nsrf_comp2)*pctsrf_old(i,nsrf_comp2) + tke(i,:,nsrf_comp3)*pctsrf_old(i,nsrf_comp3) endif ! Security abort. This option has never been tested. To test, comment the following line. ! abort_message='The fraction of the continents have changed!' ! CALL abort_physic(modname,abort_message,1) nfois(nsrf) = nfois(nsrf) + 1 END IF snow(i,nsrf) = 0. agesno(i,nsrf) = 0. ftsoil(i,:,nsrf) = tsurf(i,nsrf) ELSE pfois(nsrf) = pfois(nsrf)+ 1 END IF END DO END DO END SUBROUTINE pbl_surface_newfrac ! !**************************************************************************************** ! END MODULE pbl_surface_mod