Changeset 4123 for dynamico_lmdz


Ignore:
Timestamp:
Oct 23, 2018, 7:14:00 PM (6 years ago)
Author:
jgipsl
Message:

Updated configuration accroding to simulation set up used for simulations done during the Grand Challenge Irene/TGCC summer 2018.

Location:
dynamico_lmdz/config/DYNAMICO_LMDZ
Files:
2 added
8 edited
1 copied

Legend:

Unmodified
Added
Removed

  • dynamico_lmdz/config/DYNAMICO_LMDZ/AA_make

    r4095 r4123  
    11# Default compilation option for DYNAMICO_LMDZ configuration
    22all:
    3         (cd ../../modeles/ICOSA_LMDZ/; ./make_icosa_lmdz -prod -parallel mpi -p lmd -arch ${FCM_ARCH} -arch_path ../ARCH -job 8 ; mv bin/icosa_lmdz.exe ../../bin/. ; mv ../XIOS/bin/xios_server.exe ../../bin/.)
     3        (cd ../../modeles/ICOSA_LMDZ/; ./make_icosa_lmdz -prod -parallel mpi -p lmd -rrtm true -arch ${FCM_ARCH} -arch_path ../ARCH -job 8 ; mv bin/icosa_lmdz.exe ../../bin/. ; mv ../XIOS/bin/xios_server.exe ../../bin/.)
    44
    55
    66# Target to force full recompilation of all components
    77full:
    8         (cd ../../modeles/ICOSA_LMDZ/; ./make_icosa_lmdz -prod -parallel mpi -p lmd -arch ${FCM_ARCH} -arch_path ../ARCH -job 8 -full ; mv bin/icosa_lmdz.exe ../../bin/. ; mv ../XIOS/bin/xios_server.exe ../../bin/.)
     8        (cd ../../modeles/ICOSA_LMDZ/; ./make_icosa_lmdz -prod -parallel mpi -p lmd -rrtm true -arch ${FCM_ARCH} -arch_path ../ARCH -job 8 -full ; mv bin/icosa_lmdz.exe ../../bin/. ; mv ../XIOS/bin/xios_server.exe ../../bin/.)
    99
    1010

  • dynamico_lmdz/config/DYNAMICO_LMDZ/EXPERIMENTS/DYNAMICO_LMDZ/clim_noleap/COMP/dynamicolmdz.card

    r4119 r4123  
    33
    44[UserChoices]
    5 RESOL_NBP=20
     5RESOL_NBP=40
    66RESOL_LLM=79
    77Aquaplanet = n
     8
     9# LMDZ_Physics=NPv6.1b is very close to NPv6.1 used for CMIP6 but for use in bucket mode (without ORCHIDEE) and therefor ifl_pbltree=0
     10LMDZ_Physics=NPv6.1b
    811
    912[InitialStateFiles]
    1013List=   (/ccc/work/cont003/dsm/p86ghatt/DYNAMICO/INPUT/nbp${RESOL_NBP}/start.nc, .)\
    1114        (/ccc/work/cont003/dsm/p86ghatt/DYNAMICO/INPUT/nbp${RESOL_NBP}/startphy.nc, .)
     15         
    1216
    1317[BoundaryFiles]
    1418List=()
    15 ListNonDel= (/ccc/work/cont003/dsm/p86ghatt/DYNAMICO/INPUT/nbp${RESOL_NBP}/limit.nc, .),\
    16             (${R_IN}/ATM/OZONE/HYBRIDE/original/v2.clim/tro3_1995.new.nc, climoz.nc),\
    17             (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_360days.nc, solarforcing.nc)
     19ListNonDel= (/ccc/work/cont003/dsm/p86ghatt/DYNAMICO/INPUT/nbp${RESOL_NBP}/limit_noleap.nc, limit.nc),\
     20            (/ccc/work/cont003/dsm/p86ghatt/DYNAMICO/INPUT/nbp${RESOL_NBP}/climoz_LMDZ.nc, .),\
     21            (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Control/solarforcing_v3.1_pdControl_ave_6bands_365days.nc, solarforcing.nc)
    1822
    1923[SmoothFiles]
    … …  
    2226[ParametersFiles]
    2327List=   \
    24         (${SUBMIT_DIR}/PARAM/config.def, .),\
     28        (${SUBMIT_DIR}/PARAM/config.def_actuel, config.def),\
    2529        (${SUBMIT_DIR}/PARAM/earth_const.def, .),\
    26         (${SUBMIT_DIR}/PARAM/physiq.def_NPv6.0.11.norrtm, physiq.def),\
     30        (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def),\
    2731        (${SUBMIT_DIR}/PARAM/run.def, .),\
    2832        (${SUBMIT_DIR}/PARAM/run_icosa.def, .),\
    … …  
    3135        (${SUBMIT_DIR}/PARAM/iodef.xml, .),\
    3236        (${SUBMIT_DIR}/PARAM/icosa.xml, .),\
    33         (${SUBMIT_DIR}/PARAM/context_lmdz.xml, .),\
    3437        (${SUBMIT_DIR}/PARAM/field_def.xml, .),\
    35         (${SUBMIT_DIR}/PARAM/field_def_lmdz.xml, .),\
    36         (${SUBMIT_DIR}/PARAM/file_def_histLES_lmdz.xml, .),\
    37         (${SUBMIT_DIR}/PARAM/file_def_histdayCOSP_lmdz.xml, .),\
    38         (${SUBMIT_DIR}/PARAM/file_def_histdayNMC_lmdz.xml, .),\
    39         (${SUBMIT_DIR}/PARAM/file_def_histday_lmdz.xml, .),\
    40         (${SUBMIT_DIR}/PARAM/file_def_histhfCOSP_lmdz.xml, .),\
    41         (${SUBMIT_DIR}/PARAM/file_def_histhfNMC_lmdz.xml, .),\
    42         (${SUBMIT_DIR}/PARAM/file_def_histhf_lmdz.xml, .),\
    43         (${SUBMIT_DIR}/PARAM/file_def_histins_lmdz.xml, .),\
    44         (${SUBMIT_DIR}/PARAM/file_def_histmthCOSP_lmdz.xml, .),\
    45         (${SUBMIT_DIR}/PARAM/file_def_histmthNMC_lmdz.xml, .),\
    46         (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml, .),\
    47         (${SUBMIT_DIR}/PARAM/file_def_histstn_lmdz.xml, .),\
    48         (${SUBMIT_DIR}/PARAM/filedef_dcmip2016.xml, .),\
    49         (${SUBMIT_DIR}/PARAM/filedef_debug.xml, .)
     38    (${SUBMIT_DIR}/PARAM/filedef_dcmip2016.xml, .),\
     39    (${SUBMIT_DIR}/PARAM/filedef_debug.xml, .),\
     40        (${MODIPSL}/modeles/LMDZ5/DefLists/context_lmdz.xml, .),\
     41        (${MODIPSL}/modeles/LMDZ5/DefLists/field_def_lmdz.xml, .),\
     42        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histLES_lmdz.xml, .),\
     43        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histdayCOSP_lmdz.xml, .),\
     44        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histdayNMC_lmdz.xml, .),\
     45        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histday_lmdz.xml, .),\
     46        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histhfCOSP_lmdz.xml, .),\
     47        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histhfNMC_lmdz.xml, .),\
     48        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histhf_lmdz.xml, .),\
     49        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histins_lmdz.xml, .),\
     50        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histmthCOSP_lmdz.xml, .),\
     51        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histmthNMC_lmdz.xml, .),\
     52        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histmth_lmdz.xml, .),\
     53        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histstn_lmdz.xml, .),\
     54        (${MODIPSL}/modeles/LMDZ5/DefLists/file_def_histstrataer_lmdz.xml, .)
    5055
    5156

  • dynamico_lmdz/config/DYNAMICO_LMDZ/EXPERIMENTS/DYNAMICO_LMDZ/clim_noleap/config.card

    r4107 r4123  
    1313TagName=DYNAMICO_LMDZ
    1414#D- Choice of experiment in EXPERIEMENTS directory
    15 ExpType=DYNAMICO_LMDZ/clim_360d
     15ExpType=DYNAMICO_LMDZ/clim_noleap
    1616ExperimentName=test
    1717SpaceName=TEST
    … …  
    1919#============================
    2020#D-- leap, noleap, 360d
    21 CalendarType=360d
     21CalendarType=noleap
    2222#D-- Begin and end of job
    2323#D-- "YYYY-MM-DD"

  • dynamico_lmdz/config/DYNAMICO_LMDZ/GENERAL/DRIVER/dynamicolmdz.driver

    r4107 r4123  
    2020        RESOL_LLM=79
    2121    fi
     22
     23    ##- LMDZ physics version
     24    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value NPv6.1.3
     25    if [ ! X${dynamicolmdz_UserChoices_LMDZ_Physics} = X ] ; then
     26        LMDZ_Physics=${dynamicolmdz_UserChoices_LMDZ_Physics}
     27    else
     28        LMDZ_Physics=NPv6.0.11
     29    fi
     30    echo LMDZ physics version : ${LMDZ_Physics}
    2231
    2332

  • dynamico_lmdz/config/DYNAMICO_LMDZ/GENERAL/PARAM/icosa.xml

    r4107 r4123  
    44  <field_definition src="./field_def.xml" />
    55
    6 <!--  <file_definition src="./filedef_debug.xml" /> -->    
    7   <file_definition src="./filedef_dcmip2016.xml" />
     6<!--  <file_definition src="./filedef_debug.xml" />  --> 
     7<!--  <file_definition src="./filedef_dcmip2016.xml" />  -->
    88
    99  <field_definition>
    … …  
    5555       <field_group id="group_start" operation="once">
    5656          <field id="it_start" name="iteration"  grid_ref="scalar" />
    57           <field id="q_start" name="q"  grid_ref="grid_q" />
    5857          <field_group domain_ref="i">
    5958             <field id="ps_start" name="ps" />
    … …  
    6665             </field_group>
    6766          </field_group>
     67          <field id="q_start" name="q"  grid_ref="grid_q" />
    6868       </field_group>
    6969    </file>
    … …  
    9898      <interpolate_axis order="1" coordinate="p" />
    9999    </axis>   
    100     <axis id="nq" name="nq" n_glo="5" value="(0,4)[1 2 3 4 5]"/>
     100    <axis id="nq" name="nq" n_glo="6" value="(0,5)[1 2 3 4 5 6]"/>
    101101    <axis id="lev_ecdyn" />
    102102  </axis_definition>   

  • dynamico_lmdz/config/DYNAMICO_LMDZ/GENERAL/PARAM/run.def

    r4107 r4123  
    2424prt_level=0
    2525
     26###
     27### Informations sur la configuration utilisee
     28###
     29### type_ocean = force / slab  /couple
     30### type_ocean is modified automatically by the lmdz.driver
     31type_ocean= force
     32### version_ocean = nemo / opa8
     33version_ocean=nemo
     34### activation passage courants surface ocean-glace
     35cpl_current=y
     36### VEGET= y si ORCHIDEE, =n si bucket
     37### VEGET is modified automatically by the lmdz.driver
     38VEGET= n
     39### To activate XIOS ouputs only, set n to use IOIPSL
     40ok_all_xml= y
     41### Only read by ce0l : Do not set land points on Antartic
     42no_ter_antartique=y
     43### Do not call phytrac to speed things up
     44iflag_phytrac=0
     45

  • dynamico_lmdz/config/DYNAMICO_LMDZ/GENERAL/PARAM/run_icosa.def

    r4107 r4123  
    1515llm=_AUTO_ : DEFAULT=79
    1616
     17# disvert : vertical discretisation : string (default='std') : std, ncar, ncar30l
     18disvert=strato_custom
     19
    1720# optim_it : mesh optimisation : number of iteration : integer (default=0)
    18 optim_it=1000
     21optim_it=0
     22
    1923
    2024# ---------------------------------- Time---------------------------------
    2125
    2226# timestep : real (default=480s)
    23 dt = 300.
     27dt = 180.
    2428
    2529# advection called every itau_adv time steps : integer (default 2)
    … …  
    4953
    5054# dissipation time graddiv : real (default=5000)
    51 tau_graddiv = 3600
     55tau_graddiv = 3600.
    5256
    5357# number of iteration for graddiv : integer (default=1)
    … …  
    5559
    5660# dissipation time nxgradrot (default=5000)
    57 tau_gradrot =21600.
     61tau_gradrot = 21600.
    5862
    5963# number of iteration for nxgradrot : integer (default=1)
    … …  
    7175physics=phys_external
    7276
    73 itau_physics=3
     77itau_physics=5
    7478
    7579iflag_phys=1

  • dynamico_lmdz/config/DYNAMICO_LMDZ/GENERAL/PARAM/vert.def_L79

    r4107 r4123  
    66## The new version can be controled by following parameters
    77## Al the parameters are given in km assuming a given scalehigh
    8 # disvert : vertical discretisation : string (default='std') : std, ncar, ncar30l
    9 disvert=strato_custom
    108## scale hight
    119vert_scale=7.
    … …  
    3432##  Avec ou sans strato
    3533ok_strato=y
     34##  Parametrisation de Hines pour la strato
    3635ok_hines=n
    3736#  Couche eponge dans les couches de pression plus faible que 100 fois la pression de la derniere couche
Note: See TracChangeset for help on using the changeset viewer.