Changeset 3095 for LMDZ6/trunk/DefLists
- Timestamp:
- Dec 1, 2017, 5:07:32 PM (7 years ago)
- Location:
- LMDZ6/trunk/DefLists
- Files:
-
- 8 edited
Legend:
- Unmodified
- Added
- Removed
-
LMDZ6/trunk/DefLists/CMIP6_ping_atmos.xml
r3090 r3095 108 108 <field id="CMIP6_fco2fos" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fossil_fuel_combustion : This is the prescribed anthropogenic CO2 flux from fossil fuel use, including cement production, and flaring (but not from land-use changes, agricultural burning, forest regrowth, etc.) --> 109 109 <field id="CMIP6_fco2nat" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_natural_sources : This is what the atmosphere sees (on its own grid). This field should be equivalent to the combined natural fluxes of carbon that account for natural exchanges between the atmosphere and land (nep) or ocean (fgco2) reservoirs. --> 110 <field id="CMIP6_grpllsprof" field_ref="dummy_ XYA"/> <!-- P2 (kg m-2 s-1) large_scale_graupel_flux : unset -->111 <field id="CMIP6_grplmxrat" field_ref="dummy_ XYA"/> <!-- P2 (1.0) mass_fraction_of_graupel_in_air : Graupel mixing ratio -->112 <field id="CMIP6_h2o" field_ref=" dummy_XYA" /> <!-- P2 (1.0) mass_fraction_of_water_in_air : includes all phases of water -->110 <field id="CMIP6_grpllsprof" field_ref="dummy_not_provided" /> <!-- P2 (kg m-2 s-1) large_scale_graupel_flux : unset --> 111 <field id="CMIP6_grplmxrat" field_ref="dummy_not_provided" /> <!-- P2 (1.0) mass_fraction_of_graupel_in_air : Graupel mixing ratio --> 112 <field id="CMIP6_h2o" field_ref="ovap"> ovap+ocond </field> <!-- P2 (1.0) mass_fraction_of_water_in_air : includes all phases of water --> 113 113 <field id="CMIP6_hcfc22global" field_ref="dummy_not_provided" /> <!-- P1 (1e-12) mole_fraction_of_hcfc22_in_air : unset --> 114 114 <field id="CMIP6_hfdsl" field_ref="bils"> bils*fract_ter </field> <!-- P1 (W m-2) surface_downward_heat_flux_in_air : Downward Heat Flux at Land Surface --> … … 123 123 <field id="CMIP6_hursmax" field_ref="CMIP6_hurs" freq_op="1d" operation="maximum"> @this </field> <!-- P1 (%) relative_humidity : Daily Maximum Near-Surface Relative Humidity --> 124 124 <field id="CMIP6_hursmin" field_ref="CMIP6_hurs" freq_op="1d" operation="minimum"> @this </field> <!-- P1 (%) relative_humidity : Daily Minimum Near-Surface Relative Humidity --> 125 <field id="CMIP6_hursminCrop" field_ref="dummy_ XY" /> <!-- P1 (%) relative_humidity : minimum near-surface (usually, 2 meter) relative humidity (add cell_method attribute "time: min") -->125 <field id="CMIP6_hursminCrop" field_ref="dummy_not_provided" /> <!-- P1 (%) relative_humidity : minimum near-surface (usually, 2 meter) relative humidity (add cell_method attribute "time: min") --> 126 126 <field id="CMIP6_hus" field_ref="ovap" /> <!-- P1 (1.0) specific_humidity : Specific Humidity --> 127 127 <field id="CMIP6_huss" field_ref="q2m" /> <!-- P1 (1.0) specific_humidity : Near-surface (usually, 2 meter) specific humidity. --> … … 157 157 <field id="CMIP6_lwtoafluxaerocs" field_ref="dummy_XY" /> <!-- P1 (W m-2) longwave_flux_due_to_volcanic_aerosols_at_TOA_under_clear_sky : downwelling longwave flux due to volcanic aerosols at TOA under clear sky to be diagnosed through double radiation call --> 158 158 <field id="CMIP6_mc" field_ref="mc" /> <!-- P3 (kg m-2 s-1) atmosphere_net_upward_convective_mass_flux : The net mass flux should represent the difference between the updraft and downdraft components. The flux is computed as the mass divided by the area of the grid cell. --> 159 <field id="CMIP6_mcd" field_ref="d ummy_XYA" /> <!-- P2 (kg m-2 s-1) atmosphere_downdraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). -->160 <field id="CMIP6_mcu" field_ref=" dummy_XYA"/> <!-- P1 (kg m-2 s-1) atmosphere_updraft_convective_mass_flux : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts only. -->159 <field id="CMIP6_mcd" field_ref="dnwd" > abs(dnwd+dnwd0) </field> <!-- P2 (kg m-2 s-1) atmosphere_downdraft_convective_mass_flux : Calculated as the convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). --> 160 <field id="CMIP6_mcu" field_ref="upwd" /> <!-- P1 (kg m-2 s-1) atmosphere_updraft_convective_mass_flux : In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts only. --> 161 161 <field id="CMIP6_md" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission : Balkanski - LSCE --> 162 <field id="CMIP6_mrroLi" field_ref=" dummy_XY"/> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Runoff flux over land ice is the difference between any available liquid water in the snowpack less any refreezing. Computed as the sum of rainfall and melt of snow or ice less any refreezing or water retained in the snowpack -->162 <field id="CMIP6_mrroLi" field_ref="mrroli" /> <!-- P1 (kg m-2 s-1) land_ice_runoff_flux : Runoff flux over land ice is the difference between any available liquid water in the snowpack less any refreezing. Computed as the sum of rainfall and melt of snow or ice less any refreezing or water retained in the snowpack --> 163 163 <field id="CMIP6_n2o" field_ref="dummy_not_provided" /> <!-- P1 (mol mol-1) mole_fraction_of_nitrous_oxide_in_air : N2O volume mixing ratio --> 164 164 <field id="CMIP6_n2oglobal" field_ref="N2O_ppb" /> <!-- P1 (1e-09) mole_fraction_of_nitrous_oxide_in_air : Global mean Nitrous Oxide (N2O) --> … … 173 173 <field id="CMIP6_phalf" field_ref="paprs" /> <!-- P1 (Pa) air_pressure : Air pressure on model half-levels --> 174 174 <field id="CMIP6_pr" field_ref="precip" /> <!-- P1 (kg m-2 s-1) precipitation_flux : includes both liquid and solid phases --> 175 <field id="CMIP6_prCrop" field_ref="dummy_ XY" /> <!-- P1 (kg m-2 s-1) precipitation_flux : includes both liquid and solid phases -->175 <field id="CMIP6_prCrop" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) precipitation_flux : includes both liquid and solid phases --> 176 176 <field id="CMIP6_prc" field_ref="pluc" /> <!-- P1 (kg m-2 s-1) convective_precipitation_flux : Convective precipitation at surface; includes both liquid and solid phases. --> 177 177 <field id="CMIP6_prcprof" field_ref="pr_con_l" /> <!-- P2 (kg m-2 s-1) convective_rainfall_flux : unset --> 178 <field id="CMIP6_prcsh" field_ref="dummy_ XY" /> <!-- P1 (kg m-2 s-1) shallow_convective_precipitation_flux : Convection precipitation from shallow convection -->178 <field id="CMIP6_prcsh" field_ref="dummy_no_provided" /> <!-- P1 (kg m-2 s-1) shallow_convective_precipitation_flux : Convection precipitation from shallow convection --> 179 179 <field id="CMIP6_prhmax" field_ref="precip" freq_op="1h" operation="maximum" > @this </field> <!-- P1 (kg m-2 s-1) precipitation_flux : Maximum Hourly Precipitation Rate --> 180 180 <field id="CMIP6_prlsns" field_ref="snowl" /> <!-- P2 (kg m-2 s-1) large_scale_snowfall_flux : large-scale precipitation of all forms of water in the solid phase. --> 181 181 <field id="CMIP6_prlsprof" field_ref="plul" /> <!-- P2 (kg m-2 s-1) large_scale_rainfall_flux : unset --> 182 <field id="CMIP6_prra" field_ref=" dummy_XY" /> <!-- P1 (kg m-2 s-1) rainfall_flux : Rainfall rate -->182 <field id="CMIP6_prra" field_ref="rain_fall" /> <!-- P1 (kg m-2 s-1) rainfall_flux : Rainfall rate --> 183 183 <field id="CMIP6_prrc" field_ref="pluc" /> <!-- P1 (kg m-2 s-1) convective_rainfall_flux : Convective Rainfall rate --> 184 <field id="CMIP6_prrsn" field_ref="dummy_ XY" /> <!-- P1 (1) mass_fraction_of_rainfall_onto_snow : The fraction of the grid averaged rainfall which falls on the snow pack -->184 <field id="CMIP6_prrsn" field_ref="dummy_not_provided" /> <!-- P1 (1) mass_fraction_of_rainfall_onto_snow : The fraction of the grid averaged rainfall which falls on the snow pack --> 185 185 <field id="CMIP6_prsn" field_ref="snow" /> <!-- P1 (kg m-2 s-1) snowfall_flux : at surface; includes precipitation of all forms of water in the solid phase --> 186 186 <field id="CMIP6_prsnc" field_ref="pr_con_i" /> <!-- P2 (kg m-2 s-1) convective_snowfall_flux : convective precipitation of all forms of water in the solid phase. --> 187 <field id="CMIP6_prsnsn" field_ref="dummy_ XY" /> <!-- P1 (1) mass_fraction_of_snowfall_onto_snow : The fraction of the snowfall which falls on the snow pack -->187 <field id="CMIP6_prsnsn" field_ref="dummy_not_provided" /> <!-- P1 (1) mass_fraction_of_snowfall_onto_snow : The fraction of the snowfall which falls on the snow pack --> 188 188 <field id="CMIP6_prw" field_ref="prw" /> <!-- P1 (kg m-2) atmosphere_water_vapor_content : vertically integrated through the atmospheric column --> 189 189 <field id="CMIP6_ps" field_ref="psol" /> <!-- P1 (Pa) surface_air_pressure : surface pressure (not mean sea-level pressure), 2-D field to calculate the 3-D pressure field from hybrid coordinates --> 190 190 <field id="CMIP6_psitem" field_ref="dummy_XYA" /> <!-- P1 (kg s^-1) meridional_streamfunction_transformed_eulerian_mean : Residual mass streamfunction, computed from vstar and integrated from the top of the atmosphere (on the native model grid). Reference: Andrews et al (1987): Middle Atmospheric Dynamics. Academic Press. --> 191 191 <field id="CMIP6_psl" field_ref="slp" /> <!-- P1 (Pa) air_pressure_at_sea_level : Sea Level Pressure --> 192 <field id="CMIP6_rainmxrat" field_ref="dummy_ XYA" /> <!-- P2 (1.0) mass_fraction_of_rain_in_air : Rain mixing ratio -->192 <field id="CMIP6_rainmxrat" field_ref="dummy_not_provided" /> <!-- P2 (1.0) mass_fraction_of_rain_in_air : Rain mixing ratio --> 193 193 <field id="CMIP6_reffcclwtop" field_ref="dummy_XY" /> <!-- P1 (m) effective_radius_of_convective_cloud_liquid_water_particle_at_liquid_water_cloud_top : Droplets are liquid only. This is the effective radius "as seen from space" over convective liquid cloudy portion of grid cell. This is the value from uppermost model layer with liquid cloud or, if available, or for some models it is the sum over all liquid cloud tops, no matter where they occur, as long as they are seen from the top of the atmosphere. Reported values are weighted by total liquid cloud top fraction of (as seen from TOA) each time sample when computing monthly mean.daily data, separated to large-scale clouds, convective clouds. If any of the cloud is from more than one process (i.e. shallow convection), please provide them separately. --> 194 194 <field id="CMIP6_reffclic" field_ref="dummy_XYA" /> <!-- P2 (m) effective_radius_of_convective_cloud_ice_particle : This is defined as the in-cloud ratio of the third moment over the second moment of the particle size distribution (obtained by considering only the cloudy portion of the grid cell). --> … … 266 266 <field id="CMIP6_smc" field_ref="f_th" /> <!-- P2 (kg m-2 s-1) atmosphere_net_upward_shallow_convective_mass_flux : The net mass flux represents the difference between the updraft and downdraft components. For models with a distinct shallow convection scheme, this is calculated as convective mass flux divided by the area of the whole grid cell (not just the area of the cloud). --> 267 267 <field id="CMIP6_snmsl" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) surface_snow_melt_flux_into_soil_layer : Water flowing out of snowpack --> 268 <field id="CMIP6_snowmxrat" field_ref="dummy_ XYA"/> <!-- P3 (1.0) mass_fraction_of_snow_in_air : Snow mixing ratio -->268 <field id="CMIP6_snowmxrat" field_ref="dummy_not_provided" /> <!-- P3 (1.0) mass_fraction_of_snow_in_air : Snow mixing ratio --> 269 269 <field id="CMIP6_snrefr" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2 s-1) surface_snow_and_ice_refreezing_flux : Re-freezing of water in the snow --> 270 270 <field id="CMIP6_snwc" field_ref="dummy_not_provided" /> <!-- P1 (kg m-2) canopy_snow_amount : Total water mass of the snowpack (liquid or frozen), averaged over a grid cell and interecepted by the canopy. --> … … 281 281 <field id="CMIP6_tas" field_ref="t2m" /> <!-- P1 (K) air_temperature : near-surface (usually, 2 meter) air temperature --> 282 282 <field id="CMIP6_tasmax" field_ref="CMIP6_tas" freq_op="1d" operation="maximum"> @this </field> <!-- P1 (K) air_temperature : maximum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: max") --> 283 <field id="CMIP6_tasmaxCrop" field_ref="dummy_ XY" /> <!-- P1 (K) air_temperature : maximum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: max") -->283 <field id="CMIP6_tasmaxCrop" field_ref="dummy_not_provided" /> <!-- P1 (K) air_temperature : maximum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: max") --> 284 284 <field id="CMIP6_tasmin" field_ref="CMIP6_tas" freq_op="1d" operation="minimum"> @this </field> <!-- P1 (K) air_temperature : minimum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: min") --> 285 <field id="CMIP6_tasminCrop" field_ref="dummy_ XY" /> <!-- P1 (K) air_temperature : minimum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: min") -->285 <field id="CMIP6_tasminCrop" field_ref="dummy_not_provided" /> <!-- P1 (K) air_temperature : minimum near-surface (usually, 2 meter) air temperature (add cell_method attribute "time: min") --> 286 286 <field id="CMIP6_tau" field_ref="taux" > sqrt( taux^2 + tauy^2) </field> <!-- P1 (N m-2) surface_downward_stress : module of the momentum lost by the atmosphere to the surface. --> 287 287 <field id="CMIP6_tauu" field_ref="taux" /> <!-- P1 (Pa) surface_downward_eastward_stress : Downward eastward wind stress at the surface --> … … 289 289 <field id="CMIP6_tauv" field_ref="tauy" /> <!-- P1 (Pa) surface_downward_northward_stress : Downward northward wind stress at the surface --> 290 290 <field id="CMIP6_tauvpbl" field_ref="dummy_XY" /> <!-- P1 (Pa) surface_downward_northward_stress_due_to_planetary_boundary_layer : The downward northward stress associated with the models parameterization of the planetary boundary layer. (This request is related to a WGNE effort to understand how models parameterize the surface stresses.) --> 291 <field id="CMIP6_tdps" field_ref=" dummy_XY" /> <!-- P2 (K) dew_point_temperature : unset -->291 <field id="CMIP6_tdps" field_ref="pvap"> 273.16 + (273.16 - 35.86)/(17.269/log(pvap/611.14)-1.) </field> <!-- P2 (K) dew_point_temperature : unset --> 292 292 <field id="CMIP6_tendacabf" field_ref="dummy_not_provided" /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_surface_mass_balance : The total surface mass balance flux over land ice is a spatial integration of the surface mass balance flux --> 293 293 <field id="CMIP6_tendlibmassbf" field_ref="dummy_not_provided" /> <!-- P3 (kg s-1) tendency_of_land_ice_mass_due_to_basal_mass_balance : The total basal mass balance flux over land ice is a spatial integration of the basal mass balance flux --> … … 345 345 <field id="CMIP6_wtem" field_ref="dummy_XYA" /> <!-- P1 (m s-1) unset : Transformed Eulerian Mean Diagnostics w*, meridional component of the residual meridional circulation (v*, w*) derived from 6 hr or higher frequency data fields (use instantaneous daily fields or 12 hr fields if the 6 hr data are not available). Scale height: 6950 m --> 346 346 <field id="CMIP6_xgwdparam" field_ref="east_gwstress" /> <!-- P2 (Pa) atmosphere_eastward_stress_due_to_gravity_wave_drag : Parameterised x-component of gravity wave drag --> 347 <field id="CMIP6_ygwdparam" field_ref="west_gwstress" 347 <field id="CMIP6_ygwdparam" field_ref="west_gwstress" /> <!-- P2 (Pa) atmosphere_northward_stress_due_to_gravity_wave_drag : Parameterised y- component of gravity wave drag --> 348 348 <field id="CMIP6_zfull" field_ref="zfull" /> <!-- P2 (m) height_above_reference_ellipsoid : Altitude of Model Full-Levels --> 349 <field id="CMIP6_zg" field_ref="geop" 349 <field id="CMIP6_zg" field_ref="geop" /> <!-- P1 (m) geopotential_height : Geopotential height on the 1000 hPa surface --> 350 350 <field id="CMIP6_zhalf" field_ref="zhalf" /> <!-- P2 (m) height_above_reference_ellipsoid : Altitude of Model Half-Levels --> 351 <field id="CMIP6_zmla" field_ref=" dummy_XY"/> <!-- P1 (m) atmosphere_boundary_layer_thickness : Height of Boundary Layer -->351 <field id="CMIP6_zmla" field_ref="s_pblh" /> <!-- P1 (m) atmosphere_boundary_layer_thickness : Height of Boundary Layer --> 352 352 <field id="CMIP6_zmlwaero" field_ref="dummy_XYA" /> <!-- P1 (K s-1) longwave_heating_rate_due_to_volcanic_aerosols : longwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required --> 353 353 <field id="CMIP6_zmswaero" field_ref="dummy_XYA" /> <!-- P1 (K s-1) shortwave_heating_rate_due_to_volcanic_aerosols : shortwave heating rate due to volcanic aerosols to be diagnosed through double radiation call, zonal average values required --> 354 <field id="CMIP6_zmtnt" field_ref=" dummy_XYA" /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_diabatic_processes : The diabatic heating rates due to all the processes that may change potential temperature -->354 <field id="CMIP6_zmtnt" field_ref="tntmp" /> <!-- P1 (K s-1) tendency_of_air_temperature_due_to_diabatic_processes : The diabatic heating rates due to all the processes that may change potential temperature --> 355 355 <field id="CMIP6_ap" field_ref="Ahyb" /><!-- One of the hybrid coordinate arrays --> 356 356 <field id="CMIP6_ap_bnds" field_ref="Ahyb_inter" /><!-- One of the hybrid coordinate arrays --> -
LMDZ6/trunk/DefLists/field_def_lmdz.xml
r3082 r3095 74 74 <field id="ndayrain" long_name="Number of dayrain(liq+sol)" unit="-" /> 75 75 <field id="precip" long_name="Precip Totale liq+sol" unit="kg/(s*m2)" /> 76 <field id="rain_fall" long_name="Precip Totale liq" unit="kg/(s*m2)" /> 76 77 <field id="plul" long_name="Large-scale Precip." unit="kg/(s*m2)" /> 77 78 <field id="plun" long_name="Numerical Precip." unit="kg/(s*m2)" /> … … 152 153 <field id="fqfonte" long_name="Land ice melt" unit="kg/m2/s" /> 153 154 <field id="runofflic" long_name="Land ice melt to ocean" unit="kg/m2/s" /> 155 <field id="mrroli" long_name="Runoff flux over land ice" unit="kg/m2/s" /> 154 156 <field id="taux" long_name="Zonal wind stress" unit="Pa" /> 155 157 <field id="tauy" long_name="Meridional wind stress" unit="Pa" /> … … 677 679 <field id="rldcs4co2" long_name="Downwelling CS LW 4xCO2 atmosphere" unit="W/m2" /> 678 680 <field id="stratomask" long_name="Stratospheric fraction" unit="-" /> 681 <field id="pvap" long_name="pvap intermediary variable" unit="-">pres*ovap*461.5 / (287.04*(1.+ (rv/rd - 1.)*ovap)) </field> 679 682 </field_group> 680 683 -
LMDZ6/trunk/DefLists/file_def_histLES_lmdz.xml
r2995 r3095 58 58 <field field_ref="ndayrain" level="10" operation="instant" /> 59 59 <field field_ref="precip" level="5" /> 60 <field field_ref="rain_fall" level="5" /> 60 61 <field field_ref="plul" level="10" /> 61 62 <field field_ref="plun" level="10" /> … … 123 124 <field field_ref="fqcalving" level="10" /> 124 125 <field field_ref="fqfonte" level="10" /> 126 <field field_ref="mrroli" level="10" /> 125 127 <field field_ref="runofflic" level="10" /> 126 128 <field field_ref="taux" level="10" /> -
LMDZ6/trunk/DefLists/file_def_histday_lmdz.xml
r2995 r3095 62 62 <field field_ref="ndayrain" level="10" operation="instant" /> 63 63 <field field_ref="precip" level="1" /> 64 <field field_ref="rain_fall" level="1" /> 64 65 <field field_ref="plul" level="1" /> 65 66 <field field_ref="plun" level="1" /> … … 127 128 <field field_ref="fqcalving" level="10" /> 128 129 <field field_ref="fqfonte" level="10" /> 130 <field field_ref="mrroli" level="10" /> 129 131 <field field_ref="runofflic" level="10" /> 130 132 <field field_ref="taux" level="10" /> -
LMDZ6/trunk/DefLists/file_def_histhf_lmdz.xml
r2995 r3095 62 62 <field field_ref="ndayrain" level="10" operation="instant" /> 63 63 <field field_ref="precip" level="10" /> 64 <field field_ref="rain_fall" level="10" /> 64 65 <field field_ref="plul" level="10" /> 65 66 <field field_ref="plun" level="10" /> … … 127 128 <field field_ref="fqcalving" level="10" /> 128 129 <field field_ref="fqfonte" level="10" /> 130 <field field_ref="mrroli" level="10" /> 129 131 <field field_ref="runofflic" level="10" /> 130 132 <field field_ref="taux" level="10" /> -
LMDZ6/trunk/DefLists/file_def_histins_lmdz.xml
r2995 r3095 58 58 <field field_ref="ndayrain" level="10" operation="instant" /> 59 59 <field field_ref="precip" level="1" /> 60 <field field_ref="rain_fall" level="1" /> 60 61 <field field_ref="plul" level="1" /> 61 62 <field field_ref="plun" level="1" /> … … 123 124 <field field_ref="fqcalving" level="10" /> 124 125 <field field_ref="fqfonte" level="10" /> 126 <field field_ref="mrroli" level="10" /> 125 127 <field field_ref="runofflic" level="10" /> 126 128 <field field_ref="taux" level="10" /> -
LMDZ6/trunk/DefLists/file_def_histmth_lmdz.xml
r3059 r3095 91 91 <field field_ref="ndayrain" level="1" operation="instant" /> 92 92 <field field_ref="precip" level="1" /> 93 <field field_ref="rain_fall" level="1" /> 93 94 <field field_ref="plul" level="1" /> 94 95 <field field_ref="plun" level="1" /> … … 156 157 <field field_ref="fqcalving" level="1" /> 157 158 <field field_ref="fqfonte" level="1" /> 159 <field field_ref="mrroli" level="1" /> 158 160 <field field_ref="runofflic" level="1" /> 159 161 <field field_ref="taux" level="1" /> -
LMDZ6/trunk/DefLists/file_def_histstn_lmdz.xml
r2995 r3095 58 58 <field field_ref="ndayrain" level="10" operation="instant" /> 59 59 <field field_ref="precip" level="10" /> 60 <field field_ref="rain_fall" level="10" /> 60 61 <field field_ref="plul" level="10" /> 61 62 <field field_ref="plun" level="10" /> … … 123 124 <field field_ref="fqcalving" level="10" /> 124 125 <field field_ref="fqfonte" level="10" /> 126 <field field_ref="mrroli" level="10" /> 125 127 <field field_ref="runofflic" level="10" /> 126 128 <field field_ref="taux" level="10" />
Note: See TracChangeset
for help on using the changeset viewer.