Context Navigation

phys_output_mod.F90 @ 3825

Last change on this file since 3825 was 3825, checked in by ymipsl, 10 years ago

Reorganize geometry and grid modules. Prepare physics for unstructutured grid support. Simplify initialization of physics from dynamic.
Compiled only with dynd3dmem, but not tested for moment.

File size: 23.8 KB

Line
1	! $Id: phys_output_mod.F90 2167 2014-12-10 14:12:43Z musat $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE aero_mod, only : naero_spc,name_aero
8	USE phys_output_write_mod, ONLY : phys_output_write
9	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
10
11	! Abderrahmane 12 2007
12	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
13	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
14	! histmth.nc : moyennes mensuelles
15	! histday.nc : moyennes journalieres
16	! histhf.nc : moyennes toutes les 3 heures
17	! histins.nc : valeurs instantanees
18	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
19
20	CONTAINS
21
22	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
23	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
24	!! histbeg, histvert et histdef
25	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
26
27	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
28	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
29	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
30	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
31	phys_out_filestations, &
32	new_aod, aerosol_couple, flag_aerosol_strat, &
33	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
34	d_t, qx, d_qx, zmasse, ok_sync)
35
36	USE iophy
37	USE dimphy
38	USE mod_grid_phy_lmdz, ONLY : nbp_lon, nbp_lat
39	USE infotrac_phy
40	USE ioipsl
41	USE phys_cal_mod, only : hour
42	USE mod_phys_lmdz_para
43	USE aero_mod, only : naero_spc,name_aero
44	!Martin
45	USE surface_data, ONLY : ok_snow
46	USE phys_output_ctrlout_mod
47	USE mod_grid_phy_lmdz, only: klon_glo
48	!USE temps_phy_mod
49	USE vertical_layers_mod,ONLY: ap,bp,presnivs,preff
50	!Use comvert_phy_mod
51	USE inifis_mod, ONLY: day_ini, itau_phy, start_time, annee_ref, day_ref
52	#ifdef CPP_XIOS
53	! ug Pour les sorties XIOS
54	USE wxios
55	#endif
56	USE inifis_mod, ONLY: prt_level, lunout
57
58	IMPLICIT NONE
59	include "clesphys.h"
60	include "thermcell.h"
61
62	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
63	INTEGER, INTENT(IN) :: ivap
64	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
65	LOGICAL, INTENT(IN) :: ok_sync
66	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
67	REAL, INTENT(IN) :: pdtphys
68	REAL, DIMENSION(klon), INTENT(IN) :: pphis
69	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_t
70	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
71	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
72	REAL, DIMENSION(klon, klev), INTENT(IN) :: zmasse
73
74
75	REAL,DIMENSION(klon),INTENT(IN) :: rlon
76	REAL,DIMENSION(klon),INTENT(IN) :: rlat
77	INTEGER, INTENT(IN) :: pim
78	INTEGER, DIMENSION(pim) :: tabij
79	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
80	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
81	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
82
83	INTEGER :: jjmp1
84	INTEGER :: nlevSTD, radpas
85	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
86	LOGICAL :: ok_LES,ok_ade,ok_aie,flag_aerosol_strat
87	LOGICAL :: new_aod, aerosol_couple
88	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
89	! Allowed values are 0, 1 and 2
90	! 0: do not read an ozone climatology
91	! 1: read a single ozone climatology that will be used day and night
92	! 2: read two ozone climatologies, the average day and night
93	! climatology and the daylight climatology
94
95	REAL :: dtime
96	INTEGER :: idayref
97	REAL :: zjulian_start, zjulian
98	REAL, DIMENSION(klev) :: Ahyb, Bhyb, Alt
99	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
100	REAL, DIMENSION(nlevSTD) :: rlevSTD
101	INTEGER :: nsrf, k, iq, iiq, iff, i, j, ilev
102	INTEGER :: naero
103	LOGICAL :: ok_veget
104	INTEGER :: iflag_pbl
105	INTEGER :: iflag_pbl_split
106	CHARACTER(LEN=4) :: bb2
107	CHARACTER(LEN=2) :: bb3
108	CHARACTER(LEN=6) :: type_ocean
109	INTEGER, DIMENSION(nbp_lon*jjmp1) :: ndex2d
110	INTEGER, DIMENSION(nbp_lonjjmp1klev) :: ndex3d
111	INTEGER :: imin_ins, imax_ins
112	INTEGER :: jmin_ins, jmax_ins
113	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
114	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
115	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
116	'Default', 'Default', 'Default', 'Default' /)
117	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
118	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
119
120	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
121	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
122
123	LOGICAL, DIMENSION(nfiles), SAVE :: phys_out_regfkey = (/ .FALSE., .FALSE., .FALSE., .FALSE., &
124	.FALSE., .FALSE., .FALSE., .FALSE., .FALSE. /)
125	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmin = (/ -180., -180., -180., -180., &
126	-180., -180., -180., -180., -180. /)
127	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmax = (/ 180., 180., 180., 180., &
128	180., 180., 180., 180., 180. /)
129	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmin = (/ -90., -90., -90., -90., &
130	-90., -90., -90., -90., -90. /)
131	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmax = (/ 90., 90., 90., 90., &
132	90., 90., 90., 90., 90. /)
133	#ifdef CPP_XIOS
134	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
135	INTEGER :: x_an, x_mois, x_jour
136	REAL :: x_heure
137	INTEGER :: ini_an, ini_mois, ini_jour
138	REAL :: ini_heure
139	#endif
140
141	WRITE(lunout,*) 'Debut phys_output_mod.F90'
142	! Initialisations (Valeurs par defaut
143
144	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
145	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
146	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
147	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
148	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
149	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
150	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
151
152
153	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD /)
154
155	phys_out_filenames(1) = 'histmth'
156	phys_out_filenames(2) = 'histday'
157	phys_out_filenames(3) = 'histhf6h'
158	phys_out_filenames(4) = 'histhf3h'
159	phys_out_filenames(5) = 'histhf3hm'
160	phys_out_filenames(6) = 'histstn'
161	phys_out_filenames(7) = 'histmthNMC'
162	phys_out_filenames(8) = 'histdayNMC'
163	phys_out_filenames(9) = 'histhfNMC.nc'
164
165	type_ecri(1) = 'ave(X)'
166	type_ecri(2) = 'ave(X)'
167	type_ecri(3) = 'inst(X)'
168	type_ecri(4) = 'inst(X)'
169	type_ecri(5) = 'ave(X)'
170	type_ecri(6) = 'inst(X)'
171	type_ecri(7) = 'inst(X)'
172	type_ecri(8) = 'inst(X)'
173	type_ecri(9) = 'inst(X)'
174
175	clef_files(1) = ok_mensuel
176	clef_files(2) = ok_journe
177	clef_files(3) = ok_hf
178	clef_files(4) = ok_instan
179	clef_files(5) = ok_LES
180	clef_files(6) = ok_instan
181	clef_files(7) = ok_histNMC(1)
182	clef_files(8) = ok_histNMC(2)
183	clef_files(9) = ok_histNMC(3)
184
185	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
186	clef_stations(1) = .FALSE.
187	clef_stations(2) = .FALSE.
188	clef_stations(3) = .FALSE.
189	clef_stations(4) = .FALSE.
190	clef_stations(5) = .FALSE.
191	clef_stations(6) = .FALSE.
192	clef_stations(7) = .FALSE.
193	clef_stations(8) = .FALSE.
194	clef_stations(9) = .FALSE.
195
196	lev_files(1) = lev_histmth
197	lev_files(2) = lev_histday
198	lev_files(3) = lev_histhf
199	lev_files(4) = lev_histins
200	lev_files(5) = lev_histLES
201	lev_files(6) = lev_histins
202	lev_files(7) = levout_histNMC(1)
203	lev_files(8) = levout_histNMC(2)
204	lev_files(9) = levout_histNMC(3)
205
206	ecrit_files(1) = ecrit_mth
207	ecrit_files(2) = ecrit_day
208	ecrit_files(3) = ecrit_hf
209	ecrit_files(4) = ecrit_ins
210	ecrit_files(5) = ecrit_LES
211	ecrit_files(6) = ecrit_ins
212	ecrit_files(7) = freq_outNMC(1)
213	ecrit_files(8) = freq_outNMC(2)
214	ecrit_files(9) = freq_outNMC(3)
215
216	!! Lectures des parametres de sorties dans physiq.def
217
218	CALL getin('phys_out_regfkey',phys_out_regfkey)
219	CALL getin('phys_out_lonmin',phys_out_lonmin)
220	CALL getin('phys_out_lonmax',phys_out_lonmax)
221	CALL getin('phys_out_latmin',phys_out_latmin)
222	CALL getin('phys_out_latmax',phys_out_latmax)
223	phys_out_levmin(:)=levmin(:)
224	CALL getin('phys_out_levmin',levmin)
225	phys_out_levmax(:)=levmax(:)
226	CALL getin('phys_out_levmax',levmax)
227	CALL getin('phys_out_filenames',phys_out_filenames)
228	phys_out_filekeys(:)=clef_files(:)
229	CALL getin('phys_out_filekeys',clef_files)
230	phys_out_filestations(:)=clef_stations(:)
231	CALL getin('phys_out_filestations',clef_stations)
232	phys_out_filelevels(:)=lev_files(:)
233	CALL getin('phys_out_filelevels',lev_files)
234	CALL getin('phys_out_filetimesteps',chtimestep)
235	phys_out_filetypes(:)=type_ecri(:)
236	CALL getin('phys_out_filetypes',type_ecri)
237
238	type_ecri_files(:)=type_ecri(:)
239
240	! if (ok_all_xml) phys_out_filelevels = 999
241
242	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
243	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
244	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
245	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
246	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
247	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
248	WRITE(lunout,*)'phys_out_filekeys=',clef_files
249	WRITE(lunout,*)'phys_out_filestations=',clef_stations
250	WRITE(lunout,*)'phys_out_filelevels=',lev_files
251
252	! A noter pour
253	! l heure initiale - dans les fichiers histoire hist* - on met comme
254	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
255	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
256	! par annee (IM).
257	!
258	idayref = day_ref
259	IF (klon_glo==1) THEN
260	CALL ymds2ju(annee_ref, 1, idayref, hour, zjulian) !jyg
261	ELSE
262	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
263	CALL ymds2ju(annee_ref, 1, day_ini, start_time, zjulian_start)
264	END IF
265
266	#ifdef CPP_XIOS
267	! ug R\'eglage du calendrier xios
268	!Temps julian => an, mois, jour, heure
269	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
270	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
271	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
272	ini_mois, ini_jour, ini_heure )
273	#endif
274
275	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
276	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
277	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
278	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
279
280	zdtime_moy = dtime ! Frequence ou l on moyenne
281
282	! Calcul des Ahyb, Bhyb et Alt
283	DO k=1,klev
284	Ahyb(k)=(ap(k)+ap(k+1))/2.
285	Bhyb(k)=(bp(k)+bp(k+1))/2.
286	Alt(k)=log(preff/presnivs(k))*8.
287	ENDDO
288	! if(prt_level.ge.1) then
289	WRITE(lunout,*)'Ap Hybrid = ',Ahyb(1:klev)
290	WRITE(lunout,*)'Bp Hybrid = ',Bhyb(1:klev)
291	WRITE(lunout,*)'Alt approx des couches pour une haut d echelle de 8km = ',Alt(1:klev)
292	! endif
293	DO iff=1,nfiles
294
295	! Calculate ecrit_files for all files
296	IF ( chtimestep(iff).eq.'Default' ) then
297	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
298	! ...)*86400.
299	ecrit_files(iff)=ecrit_files(iff)*86400.
300	ELSE IF (chtimestep(iff).eq.'-1') then
301	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
302	PRINT*,'months length'
303	ecrit_files(iff)=-1.
304	else
305	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
306	ENDIF
307
308	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
309	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
310
311
312	#ifdef CPP_XIOS
313	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
314	IF (.not. ok_all_xml) then
315	if (prt_level >= 10) then
316	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
317	endif
318	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
319	ENDIF
320
321	!!! Declaration des axes verticaux de chaque fichier:
322	if (prt_level >= 10) then
323	print*,'phys_output_open: Declare vertical axes for each file'
324	endif
325	if (iff.le.6) then
326	CALL wxios_add_vaxis("presnivs", &
327	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
328	CALL wxios_add_vaxis("Ahyb", &
329	levmax(iff) - levmin(iff) + 1, Ahyb)
330	CALL wxios_add_vaxis("Bhyb", &
331	levmax(iff) - levmin(iff) + 1, Bhyb)
332	CALL wxios_add_vaxis("Alt", &
333	levmax(iff) - levmin(iff) + 1, Alt)
334	else
335	! NMC files
336	CALL wxios_add_vaxis("plev", &
337	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
338	endif
339	#endif
340
341	IF (clef_files(iff)) THEN
342	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
343	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
344	IF (phys_out_regfkey(iff)) then
345	imin_ins=1
346	imax_ins=nbp_lon
347	jmin_ins=1
348	jmax_ins=jjmp1
349
350	! correction abderr
351	do i=1,nbp_lon
352	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
353	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
354	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
355	enddo
356
357	do j=1,jjmp1
358	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
359	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
360	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
361	enddo
362
363	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
364	imin_ins,imax_ins,jmin_ins,jmax_ins
365	WRITE(lunout,*)'longitudes : ', &
366	io_lon(imin_ins),io_lon(imax_ins), &
367	'latitudes : ', &
368	io_lat(jmax_ins),io_lat(jmin_ins)
369
370	CALL histbeg(phys_out_filenames(iff),nbp_lon,io_lon,jjmp1,io_lat, &
371	imin_ins,imax_ins-imin_ins+1, &
372	jmin_ins,jmax_ins-jmin_ins+1, &
373	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
374	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
375	!IM fichiers stations
376	else IF (clef_stations(iff)) THEN
377
378	if (prt_level >= 10) then
379	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
380	endif
381
382	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
383	phys_out_filenames(iff), &
384	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
385	else
386	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
387	dtime,nhorim(iff),nid_files(iff))
388	endif
389
390	#ifndef CPP_IOIPSL_NO_OUTPUT
391	if (iff.le.6) then
392	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
393	levmax(iff) - levmin(iff) + 1, &
394	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
395	!!!! Composantes de la coordonnee sigma-hybride
396	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
397	levmax(iff) - levmin(iff) + 1,Ahyb,nvertap(iff))
398
399	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
400	levmax(iff) - levmin(iff) + 1,Bhyb,nvertbp(iff))
401
402	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
403	levmax(iff) - levmin(iff) + 1,Alt,nvertAlt(iff))
404
405	else
406	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
407	levmax(iff) - levmin(iff) + 1, &
408	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
409	endif
410	#endif
411
412	ENDIF ! clef_files
413
414	!CR: ajout d'une variable eau
415	! IF (nqtot>=3) THEN
416
417	IF (nqtot>=nqo+1) THEN
418	! DO iq=3,nqtot
419	DO iq=nqo+1,nqtot
420	iiq=niadv(iq)
421	o_trac(iq-nqo) = ctrl_out((/ 4, 5, 1, 1, 1, 10, 11, 11, 11 /), &
422	tname(iiq),'Tracer '//ttext(iiq), "-", &
423	(/ '', '', '', '', '', '', '', '', '' /))
424	o_dtr_vdf(iq-nqo) = ctrl_out((/ 4, 7, 7, 7, 10, 10, 11, 11, 11 /), &
425	'd'//trim(tname(iq))//'_vdf', &
426	'Tendance tracer '//ttext(iiq), "-" , &
427	(/ '', '', '', '', '', '', '', '', '' /))
428
429	o_dtr_the(iq-nqo) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
430	'd'//trim(tname(iq))//'_the', &
431	'Tendance tracer '//ttext(iiq), "-", &
432	(/ '', '', '', '', '', '', '', '', '' /))
433
434	o_dtr_con(iq-nqo) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
435	'd'//trim(tname(iq))//'_con', &
436	'Tendance tracer '//ttext(iiq), "-", &
437	(/ '', '', '', '', '', '', '', '', '' /))
438
439	o_dtr_lessi_impa(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
440	'd'//trim(tname(iq))//'_lessi_impa', &
441	'Tendance tracer '//ttext(iiq), "-", &
442	(/ '', '', '', '', '', '', '', '', '' /))
443
444	o_dtr_lessi_nucl(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
445	'd'//trim(tname(iq))//'_lessi_nucl', &
446	'Tendance tracer '//ttext(iiq), "-", &
447	(/ '', '', '', '', '', '', '', '', '' /))
448
449	o_dtr_insc(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
450	'd'//trim(tname(iq))//'_insc', &
451	'Tendance tracer '//ttext(iiq), "-", &
452	(/ '', '', '', '', '', '', '', '', '' /))
453
454	o_dtr_bcscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
455	'd'//trim(tname(iq))//'_bcscav', &
456	'Tendance tracer '//ttext(iiq), "-", &
457	(/ '', '', '', '', '', '', '', '', '' /))
458
459	o_dtr_evapls(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
460	'd'//trim(tname(iq))//'_evapls', &
461	'Tendance tracer '//ttext(iiq), "-", &
462	(/ '', '', '', '', '', '', '', '', '' /))
463
464	o_dtr_ls(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
465	'd'//trim(tname(iq))//'_ls', &
466	'Tendance tracer '//ttext(iiq), "-", &
467	(/ '', '', '', '', '', '', '', '', '' /))
468
469	o_dtr_trsp(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
470	'd'//trim(tname(iq))//'_trsp', &
471	'Tendance tracer '//ttext(iiq), "-", &
472	(/ '', '', '', '', '', '', '', '', '' /))
473
474	o_dtr_sscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
475	'd'//trim(tname(iq))//'_sscav', &
476	'Tendance tracer '//ttext(iiq), "-", &
477	(/ '', '', '', '', '', '', '', '', '' /))
478
479	o_dtr_sat(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
480	'd'//trim(tname(iq))//'_sat', &
481	'Tendance tracer '//ttext(iiq), "-", &
482	(/ '', '', '', '', '', '', '', '', '' /))
483
484	o_dtr_uscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
485	'd'//trim(tname(iq))//'_uscav', &
486	'Tendance tracer '//ttext(iiq), "-", &
487	(/ '', '', '', '', '', '', '', '', '' /))
488
489	o_dtr_dry(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
490	'cum'//'d'//trim(tname(iq))//'_dry', &
491	'tracer tendency dry deposition'//ttext(iiq), "-", &
492	(/ '', '', '', '', '', '', '', '', '' /))
493
494	o_trac_cum(iq-nqo) = ctrl_out((/ 3, 4, 10, 10, 10, 10, 11, 11, 11 /), &
495	'cum'//tname(iiq),&
496	'Cumulated tracer '//ttext(iiq), "-", &
497	(/ '', '', '', '', '', '', '', '', '' /))
498	ENDDO
499	ENDIF
500
501
502	ENDDO ! iff
503
504	! Updated write frequencies due to phys_out_filetimesteps.
505	! Write frequencies are now in seconds.
506	ecrit_mth = ecrit_files(1)
507	ecrit_day = ecrit_files(2)
508	ecrit_hf = ecrit_files(3)
509	ecrit_ins = ecrit_files(4)
510	ecrit_LES = ecrit_files(5)
511	ecrit_ins = ecrit_files(6)
512
513	if (prt_level >= 10) then
514	WRITE(lunout,*)'swaero_diag=',swaero_diag
515	WRITE(lunout,*)'phys_output_open: ends here'
516	endif
517
518	end SUBROUTINE phys_output_open
519
520
521
522	SUBROUTINE convers_timesteps(str,dtime,timestep)
523
524	use ioipsl
525	USE phys_cal_mod
526	!USE comconst_phy_mod
527	!USE temps_phy_mod
528	USE inifis_mod, ONLY: day_ref, annee_ref, lunout
529	IMPLICIT NONE
530
531	CHARACTER(LEN=20) :: str
532	CHARACTER(LEN=10) :: type
533	INTEGER :: ipos,il
534	real :: ttt,xxx,timestep,dayseconde,dtime
535	parameter (dayseconde=86400.)
536
537	ipos=scan(str,'0123456789.',.TRUE.)
538	!
539	il=len_trim(str)
540	WRITE(lunout,*) "ipos = ", ipos
541	WRITE(lunout,*) "il = ", il
542	if (ipos == 0) call abort_physic("convers_timesteps", "bad str", 1)
543	read(str(1:ipos),*) ttt
544	WRITE(lunout,*)ttt
545	type=str(ipos+1:il)
546
547
548	IF ( il == ipos ) then
549	type='day'
550	endif
551
552	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
553	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) then
554	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
555	timestep = ttt * dayseconde * mth_len
556	endif
557	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
558	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
559	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
560	IF ( type == 'TS' ) timestep = ttt * dtime
561
562	WRITE(lunout,*)'type = ',type
563	WRITE(lunout,*)'nb j/h/m = ',ttt
564	WRITE(lunout,*)'timestep(s)=',timestep
565
566	END SUBROUTINE convers_timesteps
567
568	END MODULE phys_output_mod
569

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format