Context Navigation

phys_output_mod.F90 @ 3809

Last change on this file since 3809 was 3809, checked in by ymipsl, 10 years ago
Add LMDZ in aquaplanet configuration YM
File size: 23.6 KB

Line
1	! $Id: phys_output_mod.F90 2167 2014-12-10 14:12:43Z musat $
2	!
3
4	MODULE phys_output_mod
5	USE indice_sol_mod
6	USE phys_output_var_mod
7	USE aero_mod, only : naero_spc,name_aero
8	USE phys_output_write_mod, ONLY : phys_output_write
9	REAL, DIMENSION(nfiles),SAVE :: ecrit_files
10
11	! Abderrahmane 12 2007
12	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
13	!!! Ecreture des Sorties du modele dans les fichiers Netcdf :
14	! histmth.nc : moyennes mensuelles
15	! histday.nc : moyennes journalieres
16	! histhf.nc : moyennes toutes les 3 heures
17	! histins.nc : valeurs instantanees
18	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
19
20	CONTAINS
21
22	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
23	!!!!!!!!! Ouverture des fichier et definition des variable de sortie !!!!!!!!
24	!! histbeg, histvert et histdef
25	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
26
27	SUBROUTINE phys_output_open(rlon,rlat,pim,tabij,ipt,jpt,plon,plat, &
28	jjmp1,nlevSTD,clevSTD,rlevSTD, dtime, ok_veget, &
29	type_ocean, iflag_pbl,iflag_pbl_split,ok_mensuel,ok_journe, &
30	ok_hf,ok_instan,ok_LES,ok_ade,ok_aie, read_climoz, &
31	phys_out_filestations, &
32	new_aod, aerosol_couple, flag_aerosol_strat, &
33	pdtphys, paprs, pphis, pplay, lmax_th, ptconv, ptconvth, ivap, &
34	d_t, qx, d_qx, zmasse, ok_sync)
35
36	USE iophy
37	USE dimphy
38	USE infotrac
39	USE ioipsl
40	USE phys_cal_mod, only : hour
41	USE mod_phys_lmdz_para
42	USE aero_mod, only : naero_spc,name_aero
43	!Martin
44	USE surface_data, ONLY : ok_snow
45	USE phys_output_ctrlout_mod
46	USE mod_grid_phy_lmdz, only: klon_glo
47
48	#ifdef CPP_XIOS
49	! ug Pour les sorties XIOS
50	USE wxios
51	#endif
52
53	IMPLICIT NONE
54	include "dimensions.h"
55	include "temps.h"
56	include "clesphys.h"
57	include "thermcell.h"
58	include "comvert.h"
59	include "iniprint.h"
60
61	! ug Nouveaux arguments n\'ecessaires au histwrite_mod:
62	INTEGER, INTENT(IN) :: ivap
63	INTEGER, DIMENSION(klon), INTENT(IN) :: lmax_th
64	LOGICAL, INTENT(IN) :: ok_sync
65	LOGICAL, DIMENSION(klon, klev), INTENT(IN) :: ptconv, ptconvth
66	REAL, INTENT(IN) :: pdtphys
67	REAL, DIMENSION(klon), INTENT(IN) :: pphis
68	REAL, DIMENSION(klon, klev), INTENT(IN) :: pplay, d_t
69	REAL, DIMENSION(klon, klev+1), INTENT(IN) :: paprs
70	REAL, DIMENSION(klon,klev,nqtot), INTENT(IN):: qx, d_qx
71	REAL, DIMENSION(klon, llm), INTENT(IN) :: zmasse
72
73
74	REAL,DIMENSION(klon),INTENT(IN) :: rlon
75	REAL,DIMENSION(klon),INTENT(IN) :: rlat
76	INTEGER, INTENT(IN) :: pim
77	INTEGER, DIMENSION(pim) :: tabij
78	INTEGER,DIMENSION(pim), INTENT(IN) :: ipt, jpt
79	REAL,DIMENSION(pim), INTENT(IN) :: plat, plon
80	REAL,DIMENSION(pim,2) :: plat_bounds, plon_bounds
81
82	INTEGER :: jjmp1
83	INTEGER :: nlevSTD, radpas
84	LOGICAL :: ok_mensuel, ok_journe, ok_hf, ok_instan
85	LOGICAL :: ok_LES,ok_ade,ok_aie,flag_aerosol_strat
86	LOGICAL :: new_aod, aerosol_couple
87	INTEGER, INTENT(IN):: read_climoz ! read ozone climatology
88	! Allowed values are 0, 1 and 2
89	! 0: do not read an ozone climatology
90	! 1: read a single ozone climatology that will be used day and night
91	! 2: read two ozone climatologies, the average day and night
92	! climatology and the daylight climatology
93
94	REAL :: dtime
95	INTEGER :: idayref
96	REAL :: zjulian_start, zjulian
97	REAL, DIMENSION(klev) :: Ahyb, Bhyb, Alt
98	CHARACTER(LEN=4), DIMENSION(nlevSTD) :: clevSTD
99	REAL, DIMENSION(nlevSTD) :: rlevSTD
100	INTEGER :: nsrf, k, iq, iiq, iff, i, j, ilev
101	INTEGER :: naero
102	LOGICAL :: ok_veget
103	INTEGER :: iflag_pbl
104	INTEGER :: iflag_pbl_split
105	CHARACTER(LEN=4) :: bb2
106	CHARACTER(LEN=2) :: bb3
107	CHARACTER(LEN=6) :: type_ocean
108	INTEGER, DIMENSION(iim*jjmp1) :: ndex2d
109	INTEGER, DIMENSION(iimjjmp1klev) :: ndex3d
110	INTEGER :: imin_ins, imax_ins
111	INTEGER :: jmin_ins, jmax_ins
112	INTEGER, DIMENSION(nfiles) :: phys_out_levmin, phys_out_levmax
113	INTEGER, DIMENSION(nfiles) :: phys_out_filelevels
114	CHARACTER(LEN=20), DIMENSION(nfiles) :: chtimestep = (/ 'Default', 'Default', 'Default', 'Default', 'Default', &
115	'Default', 'Default', 'Default', 'Default' /)
116	LOGICAL, DIMENSION(nfiles) :: phys_out_filekeys
117	LOGICAL, DIMENSION(nfiles) :: phys_out_filestations
118
119	!!!!!!!!!! stockage dans une region limitee pour chaque fichier !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
120	! entre [phys_out_lonmin,phys_out_lonmax] et [phys_out_latmin,phys_out_latmax]
121
122	LOGICAL, DIMENSION(nfiles), SAVE :: phys_out_regfkey = (/ .FALSE., .FALSE., .FALSE., .FALSE., &
123	.FALSE., .FALSE., .FALSE., .FALSE., .FALSE. /)
124	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmin = (/ -180., -180., -180., -180., &
125	-180., -180., -180., -180., -180. /)
126	REAL, DIMENSION(nfiles), SAVE :: phys_out_lonmax = (/ 180., 180., 180., 180., &
127	180., 180., 180., 180., 180. /)
128	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmin = (/ -90., -90., -90., -90., &
129	-90., -90., -90., -90., -90. /)
130	REAL, DIMENSION(nfiles), SAVE :: phys_out_latmax = (/ 90., 90., 90., 90., &
131	90., 90., 90., 90., 90. /)
132	#ifdef CPP_XIOS
133	! ug Variables utilis\'ees pour r\'ecup\'erer le calendrier pour xios
134	INTEGER :: x_an, x_mois, x_jour
135	REAL :: x_heure
136	INTEGER :: ini_an, ini_mois, ini_jour
137	REAL :: ini_heure
138	#endif
139
140	WRITE(lunout,*) 'Debut phys_output_mod.F90'
141	! Initialisations (Valeurs par defaut
142
143	IF (.NOT. ALLOCATED(o_trac)) ALLOCATE(o_trac(nqtot))
144	IF (.NOT. ALLOCATED(o_trac_cum)) ALLOCATE(o_trac_cum(nqtot))
145	ALLOCATE(o_dtr_the(nqtot),o_dtr_con(nqtot),o_dtr_lessi_impa(nqtot))
146	ALLOCATE(o_dtr_lessi_nucl(nqtot),o_dtr_insc(nqtot),o_dtr_bcscav(nqtot))
147	ALLOCATE(o_dtr_evapls(nqtot),o_dtr_ls(nqtot),o_dtr_trsp(nqtot))
148	ALLOCATE(o_dtr_sscav(nqtot),o_dtr_sat(nqtot),o_dtr_uscav(nqtot))
149	ALLOCATE(o_dtr_dry(nqtot),o_dtr_vdf(nqtot))
150
151
152	levmax = (/ klev, klev, klev, klev, klev, klev, nlevSTD, nlevSTD, nlevSTD /)
153
154	phys_out_filenames(1) = 'histmth'
155	phys_out_filenames(2) = 'histday'
156	phys_out_filenames(3) = 'histhf6h'
157	phys_out_filenames(4) = 'histhf3h'
158	phys_out_filenames(5) = 'histhf3hm'
159	phys_out_filenames(6) = 'histstn'
160	phys_out_filenames(7) = 'histmthNMC'
161	phys_out_filenames(8) = 'histdayNMC'
162	phys_out_filenames(9) = 'histhfNMC.nc'
163
164	type_ecri(1) = 'ave(X)'
165	type_ecri(2) = 'ave(X)'
166	type_ecri(3) = 'inst(X)'
167	type_ecri(4) = 'inst(X)'
168	type_ecri(5) = 'ave(X)'
169	type_ecri(6) = 'inst(X)'
170	type_ecri(7) = 'inst(X)'
171	type_ecri(8) = 'inst(X)'
172	type_ecri(9) = 'inst(X)'
173
174	clef_files(1) = ok_mensuel
175	clef_files(2) = ok_journe
176	clef_files(3) = ok_hf
177	clef_files(4) = ok_instan
178	clef_files(5) = ok_LES
179	clef_files(6) = ok_instan
180	clef_files(7) = ok_histNMC(1)
181	clef_files(8) = ok_histNMC(2)
182	clef_files(9) = ok_histNMC(3)
183
184	!sortir des fichiers "stations" si clef_stations(:)=.TRUE.
185	clef_stations(1) = .FALSE.
186	clef_stations(2) = .FALSE.
187	clef_stations(3) = .FALSE.
188	clef_stations(4) = .FALSE.
189	clef_stations(5) = .FALSE.
190	clef_stations(6) = .FALSE.
191	clef_stations(7) = .FALSE.
192	clef_stations(8) = .FALSE.
193	clef_stations(9) = .FALSE.
194
195	lev_files(1) = lev_histmth
196	lev_files(2) = lev_histday
197	lev_files(3) = lev_histhf
198	lev_files(4) = lev_histins
199	lev_files(5) = lev_histLES
200	lev_files(6) = lev_histins
201	lev_files(7) = levout_histNMC(1)
202	lev_files(8) = levout_histNMC(2)
203	lev_files(9) = levout_histNMC(3)
204
205	ecrit_files(1) = ecrit_mth
206	ecrit_files(2) = ecrit_day
207	ecrit_files(3) = ecrit_hf
208	ecrit_files(4) = ecrit_ins
209	ecrit_files(5) = ecrit_LES
210	ecrit_files(6) = ecrit_ins
211	ecrit_files(7) = freq_outNMC(1)
212	ecrit_files(8) = freq_outNMC(2)
213	ecrit_files(9) = freq_outNMC(3)
214
215	!! Lectures des parametres de sorties dans physiq.def
216
217	CALL getin('phys_out_regfkey',phys_out_regfkey)
218	CALL getin('phys_out_lonmin',phys_out_lonmin)
219	CALL getin('phys_out_lonmax',phys_out_lonmax)
220	CALL getin('phys_out_latmin',phys_out_latmin)
221	CALL getin('phys_out_latmax',phys_out_latmax)
222	phys_out_levmin(:)=levmin(:)
223	CALL getin('phys_out_levmin',levmin)
224	phys_out_levmax(:)=levmax(:)
225	CALL getin('phys_out_levmax',levmax)
226	CALL getin('phys_out_filenames',phys_out_filenames)
227	phys_out_filekeys(:)=clef_files(:)
228	CALL getin('phys_out_filekeys',clef_files)
229	phys_out_filestations(:)=clef_stations(:)
230	CALL getin('phys_out_filestations',clef_stations)
231	phys_out_filelevels(:)=lev_files(:)
232	CALL getin('phys_out_filelevels',lev_files)
233	CALL getin('phys_out_filetimesteps',chtimestep)
234	phys_out_filetypes(:)=type_ecri(:)
235	CALL getin('phys_out_filetypes',type_ecri)
236
237	type_ecri_files(:)=type_ecri(:)
238
239	! if (ok_all_xml) phys_out_filelevels = 999
240
241	WRITE(lunout,*)'phys_out_lonmin=',phys_out_lonmin
242	WRITE(lunout,*)'phys_out_lonmax=',phys_out_lonmax
243	WRITE(lunout,*)'phys_out_latmin=',phys_out_latmin
244	WRITE(lunout,*)'phys_out_latmax=',phys_out_latmax
245	WRITE(lunout,*)'phys_out_filenames=',phys_out_filenames
246	WRITE(lunout,*)'phys_out_filetypes=',type_ecri
247	WRITE(lunout,*)'phys_out_filekeys=',clef_files
248	WRITE(lunout,*)'phys_out_filestations=',clef_stations
249	WRITE(lunout,*)'phys_out_filelevels=',lev_files
250
251	! A noter pour
252	! l heure initiale - dans les fichiers histoire hist* - on met comme
253	! heure de debut soit la vraie heure (pour le 1D) soit 0h (pour le 3D)
254	! afin d avoir une seule sortie mensuelle par mois lorsque l on tourne
255	! par annee (IM).
256	!
257	idayref = day_ref
258	IF (klon_glo==1) THEN
259	CALL ymds2ju(annee_ref, 1, idayref, hour, zjulian) !jyg
260	ELSE
261	CALL ymds2ju(annee_ref, 1, idayref, 0.0, zjulian)
262	CALL ymds2ju(annee_ref, 1, day_ini, start_time, zjulian_start)
263	END IF
264
265	#ifdef CPP_XIOS
266	! ug R\'eglage du calendrier xios
267	!Temps julian => an, mois, jour, heure
268	CALL ju2ymds(zjulian, x_an, x_mois, x_jour, x_heure)
269	CALL ju2ymds(zjulian_start, ini_an, ini_mois, ini_jour, ini_heure)
270	CALL wxios_set_cal(dtime, calend, x_an, x_mois, x_jour, x_heure, ini_an, &
271	ini_mois, ini_jour, ini_heure )
272	#endif
273
274	!!!!!!!!!!!!!!!!!!!!!!! Boucle sur les fichiers !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
275	! Appel de histbeg et histvert pour creer le fichier et les niveaux verticaux !!
276	! Appel des histbeg pour definir les variables (nom, moy ou inst, freq de sortie ..
277	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
278
279	zdtime_moy = dtime ! Frequence ou l on moyenne
280
281	! Calcul des Ahyb, Bhyb et Alt
282	DO k=1,klev
283	Ahyb(k)=(ap(k)+ap(k+1))/2.
284	Bhyb(k)=(bp(k)+bp(k+1))/2.
285	Alt(k)=log(preff/presnivs(k))*8.
286	ENDDO
287	! if(prt_level.ge.1) then
288	WRITE(lunout,*)'Ap Hybrid = ',Ahyb(1:klev)
289	WRITE(lunout,*)'Bp Hybrid = ',Bhyb(1:klev)
290	WRITE(lunout,*)'Alt approx des couches pour une haut d echelle de 8km = ',Alt(1:klev)
291	! endif
292	DO iff=1,nfiles
293
294	! Calculate ecrit_files for all files
295	IF ( chtimestep(iff).eq.'Default' ) then
296	! Par defaut ecrit_files = (ecrit_mensuel ecrit_jour ecrit_hf
297	! ...)*86400.
298	ecrit_files(iff)=ecrit_files(iff)*86400.
299	ELSE IF (chtimestep(iff).eq.'-1') then
300	PRINT*,'ecrit_files(',iff,') < 0 so IOIPSL work on different'
301	PRINT*,'months length'
302	ecrit_files(iff)=-1.
303	else
304	CALL convers_timesteps(chtimestep(iff),dtime,ecrit_files(iff))
305	ENDIF
306
307	WRITE(lunout,*)'ecrit_files(',iff,')= ',ecrit_files(iff)
308	zoutm(iff) = ecrit_files(iff) ! Frequence ou l on ecrit en seconde
309
310
311	#ifdef CPP_XIOS
312	!!! Ouverture de chaque fichier XIOS !!!!!!!!!!!
313	IF (.not. ok_all_xml) then
314	if (prt_level >= 10) then
315	print*,'phys_output_open: call wxios_add_file with phys_out_filenames(iff)=',trim(phys_out_filenames(iff))
316	endif
317	CALL wxios_add_file(phys_out_filenames(iff),chtimestep(iff),lev_files(iff))
318	ENDIF
319
320	!!! Declaration des axes verticaux de chaque fichier:
321	if (prt_level >= 10) then
322	print*,'phys_output_open: Declare vertical axes for each file'
323	endif
324	if (iff.le.6) then
325	CALL wxios_add_vaxis("presnivs", &
326	levmax(iff) - levmin(iff) + 1, presnivs(levmin(iff):levmax(iff)))
327	CALL wxios_add_vaxis("Ahyb", &
328	levmax(iff) - levmin(iff) + 1, Ahyb)
329	CALL wxios_add_vaxis("Bhyb", &
330	levmax(iff) - levmin(iff) + 1, Bhyb)
331	CALL wxios_add_vaxis("Alt", &
332	levmax(iff) - levmin(iff) + 1, Alt)
333	else
334	! NMC files
335	CALL wxios_add_vaxis("plev", &
336	levmax(iff) - levmin(iff) + 1, rlevSTD(levmin(iff):levmax(iff)))
337	endif
338	#endif
339
340	IF (clef_files(iff)) THEN
341	!!!!!!!!!!!!!!!!! Traitement dans le cas ou l'on veut stocker sur un domaine limite !!
342	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
343	IF (phys_out_regfkey(iff)) then
344	imin_ins=1
345	imax_ins=iim
346	jmin_ins=1
347	jmax_ins=jjmp1
348
349	! correction abderr
350	do i=1,iim
351	WRITE(lunout,*)'io_lon(i)=',io_lon(i)
352	IF (io_lon(i).le.phys_out_lonmin(iff)) imin_ins=i
353	IF (io_lon(i).le.phys_out_lonmax(iff)) imax_ins=i+1
354	enddo
355
356	do j=1,jjmp1
357	WRITE(lunout,*)'io_lat(j)=',io_lat(j)
358	IF (io_lat(j).ge.phys_out_latmin(iff)) jmax_ins=j+1
359	IF (io_lat(j).ge.phys_out_latmax(iff)) jmin_ins=j
360	enddo
361
362	WRITE(lunout,*)'On stoke le fichier histoire numero ',iff,' sur ', &
363	imin_ins,imax_ins,jmin_ins,jmax_ins
364	WRITE(lunout,*)'longitudes : ', &
365	io_lon(imin_ins),io_lon(imax_ins), &
366	'latitudes : ', &
367	io_lat(jmax_ins),io_lat(jmin_ins)
368
369	CALL histbeg(phys_out_filenames(iff),iim,io_lon,jjmp1,io_lat, &
370	imin_ins,imax_ins-imin_ins+1, &
371	jmin_ins,jmax_ins-jmin_ins+1, &
372	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
373	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
374	!IM fichiers stations
375	else IF (clef_stations(iff)) THEN
376
377	if (prt_level >= 10) then
378	WRITE(lunout,*)'phys_output_open: iff=',iff,' phys_out_filenames(iff)=',phys_out_filenames(iff)
379	endif
380
381	CALL histbeg_phy_all(rlon,rlat,pim,tabij,ipt,jpt,plon,plat,plon_bounds,plat_bounds, &
382	phys_out_filenames(iff), &
383	itau_phy,zjulian,dtime,nhorim(iff),nid_files(iff))
384	else
385	CALL histbeg_phy_all(phys_out_filenames(iff),itau_phy,zjulian,&
386	dtime,nhorim(iff),nid_files(iff))
387	endif
388
389	#ifndef CPP_IOIPSL_NO_OUTPUT
390	if (iff.le.6) then
391	CALL histvert(nid_files(iff), "presnivs", "Vertical levels", "Pa", &
392	levmax(iff) - levmin(iff) + 1, &
393	presnivs(levmin(iff):levmax(iff)), nvertm(iff),"down")
394	!!!! Composantes de la coordonnee sigma-hybride
395	CALL histvert(nid_files(iff), "Ahyb","Ahyb comp of Hyb Cord ", "Pa", &
396	levmax(iff) - levmin(iff) + 1,Ahyb,nvertap(iff))
397
398	CALL histvert(nid_files(iff), "Bhyb","Bhyb comp of Hyb Cord", " ", &
399	levmax(iff) - levmin(iff) + 1,Bhyb,nvertbp(iff))
400
401	CALL histvert(nid_files(iff), "Alt","Height approx for scale heigh of 8km at levels", "Km", &
402	levmax(iff) - levmin(iff) + 1,Alt,nvertAlt(iff))
403
404	else
405	CALL histvert(nid_files(iff), "plev", "pressure", "Pa", &
406	levmax(iff) - levmin(iff) + 1, &
407	rlevSTD(levmin(iff):levmax(iff)), nvertm(iff), "down")
408	endif
409	#endif
410
411	ENDIF ! clef_files
412
413	!CR: ajout d'une variable eau
414	! IF (nqtot>=3) THEN
415
416	IF (nqtot>=nqo+1) THEN
417	! DO iq=3,nqtot
418	DO iq=nqo+1,nqtot
419	iiq=niadv(iq)
420	o_trac(iq-nqo) = ctrl_out((/ 4, 5, 1, 1, 1, 10, 11, 11, 11 /), &
421	tname(iiq),'Tracer '//ttext(iiq), "-", &
422	(/ '', '', '', '', '', '', '', '', '' /))
423	o_dtr_vdf(iq-nqo) = ctrl_out((/ 4, 7, 7, 7, 10, 10, 11, 11, 11 /), &
424	'd'//trim(tname(iq))//'_vdf', &
425	'Tendance tracer '//ttext(iiq), "-" , &
426	(/ '', '', '', '', '', '', '', '', '' /))
427
428	o_dtr_the(iq-nqo) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
429	'd'//trim(tname(iq))//'_the', &
430	'Tendance tracer '//ttext(iiq), "-", &
431	(/ '', '', '', '', '', '', '', '', '' /))
432
433	o_dtr_con(iq-nqo) = ctrl_out((/ 5, 7, 7, 7, 10, 10, 11, 11, 11 /), &
434	'd'//trim(tname(iq))//'_con', &
435	'Tendance tracer '//ttext(iiq), "-", &
436	(/ '', '', '', '', '', '', '', '', '' /))
437
438	o_dtr_lessi_impa(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
439	'd'//trim(tname(iq))//'_lessi_impa', &
440	'Tendance tracer '//ttext(iiq), "-", &
441	(/ '', '', '', '', '', '', '', '', '' /))
442
443	o_dtr_lessi_nucl(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
444	'd'//trim(tname(iq))//'_lessi_nucl', &
445	'Tendance tracer '//ttext(iiq), "-", &
446	(/ '', '', '', '', '', '', '', '', '' /))
447
448	o_dtr_insc(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
449	'd'//trim(tname(iq))//'_insc', &
450	'Tendance tracer '//ttext(iiq), "-", &
451	(/ '', '', '', '', '', '', '', '', '' /))
452
453	o_dtr_bcscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
454	'd'//trim(tname(iq))//'_bcscav', &
455	'Tendance tracer '//ttext(iiq), "-", &
456	(/ '', '', '', '', '', '', '', '', '' /))
457
458	o_dtr_evapls(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
459	'd'//trim(tname(iq))//'_evapls', &
460	'Tendance tracer '//ttext(iiq), "-", &
461	(/ '', '', '', '', '', '', '', '', '' /))
462
463	o_dtr_ls(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
464	'd'//trim(tname(iq))//'_ls', &
465	'Tendance tracer '//ttext(iiq), "-", &
466	(/ '', '', '', '', '', '', '', '', '' /))
467
468	o_dtr_trsp(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
469	'd'//trim(tname(iq))//'_trsp', &
470	'Tendance tracer '//ttext(iiq), "-", &
471	(/ '', '', '', '', '', '', '', '', '' /))
472
473	o_dtr_sscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
474	'd'//trim(tname(iq))//'_sscav', &
475	'Tendance tracer '//ttext(iiq), "-", &
476	(/ '', '', '', '', '', '', '', '', '' /))
477
478	o_dtr_sat(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
479	'd'//trim(tname(iq))//'_sat', &
480	'Tendance tracer '//ttext(iiq), "-", &
481	(/ '', '', '', '', '', '', '', '', '' /))
482
483	o_dtr_uscav(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
484	'd'//trim(tname(iq))//'_uscav', &
485	'Tendance tracer '//ttext(iiq), "-", &
486	(/ '', '', '', '', '', '', '', '', '' /))
487
488	o_dtr_dry(iq-nqo) = ctrl_out((/ 7, 7, 7, 7, 10, 10, 11, 11, 11 /), &
489	'cum'//'d'//trim(tname(iq))//'_dry', &
490	'tracer tendency dry deposition'//ttext(iiq), "-", &
491	(/ '', '', '', '', '', '', '', '', '' /))
492
493	o_trac_cum(iq-nqo) = ctrl_out((/ 3, 4, 10, 10, 10, 10, 11, 11, 11 /), &
494	'cum'//tname(iiq),&
495	'Cumulated tracer '//ttext(iiq), "-", &
496	(/ '', '', '', '', '', '', '', '', '' /))
497	ENDDO
498	ENDIF
499
500
501	ENDDO ! iff
502
503	! Updated write frequencies due to phys_out_filetimesteps.
504	! Write frequencies are now in seconds.
505	ecrit_mth = ecrit_files(1)
506	ecrit_day = ecrit_files(2)
507	ecrit_hf = ecrit_files(3)
508	ecrit_ins = ecrit_files(4)
509	ecrit_LES = ecrit_files(5)
510	ecrit_ins = ecrit_files(6)
511
512	if (prt_level >= 10) then
513	WRITE(lunout,*)'swaero_diag=',swaero_diag
514	WRITE(lunout,*)'phys_output_open: ends here'
515	endif
516
517	end SUBROUTINE phys_output_open
518
519
520
521	SUBROUTINE convers_timesteps(str,dtime,timestep)
522
523	use ioipsl
524	USE phys_cal_mod
525
526	IMPLICIT NONE
527
528	CHARACTER(LEN=20) :: str
529	CHARACTER(LEN=10) :: type
530	INTEGER :: ipos,il
531	real :: ttt,xxx,timestep,dayseconde,dtime
532	parameter (dayseconde=86400.)
533	include "temps.h"
534	include "comconst.h"
535	include "iniprint.h"
536
537	ipos=scan(str,'0123456789.',.TRUE.)
538	!
539	il=len_trim(str)
540	WRITE(lunout,*) "ipos = ", ipos
541	WRITE(lunout,*) "il = ", il
542	if (ipos == 0) call abort_gcm("convers_timesteps", "bad str", 1)
543	read(str(1:ipos),*) ttt
544	WRITE(lunout,*)ttt
545	type=str(ipos+1:il)
546
547
548	IF ( il == ipos ) then
549	type='day'
550	endif
551
552	IF ( type == 'day'.or.type == 'days'.or.type == 'jours'.or.type == 'jour' ) timestep = ttt * dayseconde
553	IF ( type == 'mounths'.or.type == 'mth'.or.type == 'mois' ) then
554	WRITE(lunout,*)'annee_ref,day_ref mon_len',annee_ref,day_ref,mth_len
555	timestep = ttt * dayseconde * mth_len
556	endif
557	IF ( type == 'hours'.or.type == 'hr'.or.type == 'heurs') timestep = ttt * dayseconde / 24.
558	IF ( type == 'mn'.or.type == 'minutes' ) timestep = ttt * 60.
559	IF ( type == 's'.or.type == 'sec'.or.type == 'secondes' ) timestep = ttt
560	IF ( type == 'TS' ) timestep = ttt * dtime
561
562	WRITE(lunout,*)'type = ',type
563	WRITE(lunout,*)'nb j/h/m = ',ttt
564	WRITE(lunout,*)'timestep(s)=',timestep
565
566	END SUBROUTINE convers_timesteps
567
568	END MODULE phys_output_mod
569

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format