Context Navigation

scm.F90 @ 3594

Last change on this file since 3594 was 3594, checked in by fhourdin, 5 years ago
Improvement for SCM standard format
File size: 44.1 KB

Line
1	SUBROUTINE scm
2
3	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
4	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
5	clwcon, detr_therm, &
6	qsol, fevap, z0m, z0h, agesno, &
7	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
8	falb_dir, falb_dif, &
9	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
10	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
11	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
12	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
13	wake_deltaq, wake_deltat, wake_s, wake_dens, &
14	zgam, zmax0, zmea, zpic, zsig, &
15	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
16	prlw_ancien, prsw_ancien, prw_ancien, &
17	u10m,v10m,ale_wake,ale_bl_stat
18
19
20	USE dimphy
21	USE surface_data, only : type_ocean,ok_veget
22	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
23	pbl_surface_final
24	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
25
26	USE infotrac ! new
27	USE control_mod
28	USE indice_sol_mod
29	USE phyaqua_mod
30	! USE mod_1D_cases_read
31	USE mod_1D_cases_read_std
32	!USE mod_1D_amma_read
33	USE print_control_mod, ONLY: lunout, prt_level
34	USE iniphysiq_mod, ONLY: iniphysiq
35	USE mod_const_mpi, ONLY: comm_lmdz
36	USE physiq_mod, ONLY: physiq
37	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
38	preff, aps, bps, pseudoalt, scaleheight
39	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
40	itau_dyn, itau_phy, start_time, year_len
41	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
42
43	implicit none
44	#include "dimensions.h"
45	#include "YOMCST.h"
46	!!#include "control.h"
47	#include "clesphys.h"
48	#include "dimsoil.h"
49	!#include "indicesol.h"
50
51	#include "compar1d.h"
52	#include "flux_arp.h"
53	#include "date_cas.h"
54	#include "tsoilnudge.h"
55	#include "fcg_gcssold.h"
56	#include "compbl.h"
57
58	!=====================================================================
59	! DECLARATIONS
60	!=====================================================================
61
62	!---------------------------------------------------------------------
63	! Externals
64	!---------------------------------------------------------------------
65	external fq_sat
66	real fq_sat
67
68	!---------------------------------------------------------------------
69	! Arguments d' initialisations de la physique (USER DEFINE)
70	!---------------------------------------------------------------------
71
72	integer, parameter :: ngrid=1
73	real :: zcufi = 1.
74	real :: zcvfi = 1.
75
76	!- real :: nat_surf
77	!- logical :: ok_flux_surf
78	!- real :: fsens
79	!- real :: flat
80	!- real :: tsurf
81	!- real :: rugos
82	!- real :: qsol(1:2)
83	!- real :: qsurf
84	!- real :: psurf
85	!- real :: zsurf
86	!- real :: albedo
87	!-
88	!- real :: time = 0.
89	!- real :: time_ini
90	!- real :: xlat
91	!- real :: xlon
92	!- real :: wtsurf
93	!- real :: wqsurf
94	!- real :: restart_runoff
95	!- real :: xagesno
96	!- real :: qsolinp
97	!- real :: zpicinp
98	!-
99	real :: fnday
100	real :: day, daytime
101	real :: day1
102	real :: heure
103	integer :: jour
104	integer :: mois
105	integer :: an
106
107	!---------------------------------------------------------------------
108	! Declarations related to forcing and initial profiles
109	!---------------------------------------------------------------------
110
111	integer :: kmax = llm
112	integer llm700,nq1,nq2
113	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
114	real timestep, frac
115	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
116	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
117	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
118	real dqtdxls(nlev_max),dqtdyls(nlev_max)
119	real dqtdtls(nlev_max),thlpcar(nlev_max)
120	real qprof(nlev_max,nqmx)
121
122	! integer :: forcing_type
123	logical :: forcing_les = .false.
124	logical :: forcing_armcu = .false.
125	logical :: forcing_rico = .false.
126	logical :: forcing_radconv = .false.
127	logical :: forcing_toga = .false.
128	logical :: forcing_twpice = .false.
129	logical :: forcing_amma = .false.
130	logical :: forcing_dice = .false.
131	logical :: forcing_gabls4 = .false.
132
133	logical :: forcing_GCM2SCM = .false.
134	logical :: forcing_GCSSold = .false.
135	logical :: forcing_sandu = .false.
136	logical :: forcing_astex = .false.
137	logical :: forcing_fire = .false.
138	logical :: forcing_case = .false.
139	logical :: forcing_case2 = .false.
140	logical :: forcing_SCM = .false.
141	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
142	! (cf read_tsurf1d.F)
143
144	real wwww
145	!vertical advection computation
146	! real d_t_z(llm), d_q_z(llm)
147	! real d_t_dyn_z(llm), dq_dyn_z(llm)
148	! real zz(llm)
149	! real zfact
150
151	!flag forcings
152	logical :: nudge_wind=.true.
153	logical :: nudge_thermo=.false.
154	logical :: cptadvw=.true.
155	!=====================================================================
156	! DECLARATIONS FOR EACH CASE
157	!=====================================================================
158	!
159	#include "1D_decl_cases.h"
160	!
161	!---------------------------------------------------------------------
162	! Declarations related to nudging
163	!---------------------------------------------------------------------
164	integer :: nudge_max
165	parameter (nudge_max=9)
166	integer :: inudge_RHT=1
167	integer :: inudge_UV=2
168	logical :: nudge(nudge_max)
169	real :: t_targ(llm)
170	real :: rh_targ(llm)
171	real :: u_targ(llm)
172	real :: v_targ(llm)
173	!
174	!---------------------------------------------------------------------
175	! Declarations related to vertical discretization:
176	!---------------------------------------------------------------------
177	real :: pzero=1.e5
178	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
179	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
180
181	!---------------------------------------------------------------------
182	! Declarations related to variables
183	!---------------------------------------------------------------------
184
185	real :: phi(llm)
186	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
187	REAL rot(1, llm) ! relative vorticity, in s-1
188	real :: rlat_rad(1),rlon_rad(1)
189	real :: omega(llm),omega2(llm),rho(llm+1)
190	real :: ug(llm),vg(llm),fcoriolis
191	real :: sfdt, cfdt
192	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
193	real :: dt_dyn(llm)
194	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
195	real :: d_u_nudge(llm),d_v_nudge(llm)
196	real :: du_adv(llm),dv_adv(llm)
197	real :: du_age(llm),dv_age(llm)
198	real :: alpha
199	real :: ttt
200
201	REAL, ALLOCATABLE, DIMENSION(:,:):: q
202	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
203	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
204	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
205	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
206	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
207
208	!---------------------------------------------------------------------
209	! Initialization of surface variables
210	!---------------------------------------------------------------------
211	real :: run_off_lic_0(1)
212	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
213	real :: tsoil(1,nsoilmx,nbsrf)
214	! real :: agesno(1,nbsrf)
215
216	!---------------------------------------------------------------------
217	! Call to phyredem
218	!---------------------------------------------------------------------
219	logical :: ok_writedem =.true.
220	real :: sollw_in = 0.
221	real :: solsw_in = 0.
222
223	!---------------------------------------------------------------------
224	! Call to physiq
225	!---------------------------------------------------------------------
226	logical :: firstcall=.true.
227	logical :: lastcall=.false.
228	real :: phis(1) = 0.0
229	real :: dpsrf(1)
230
231	!---------------------------------------------------------------------
232	! Initializations of boundary conditions
233	!---------------------------------------------------------------------
234	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
235	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
236	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
237	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
238	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
239	real, allocatable :: phy_ice (:) ! Fraction de glace
240	real, allocatable :: phy_fter(:) ! Fraction de terre
241	real, allocatable :: phy_foce(:) ! Fraction de ocean
242	real, allocatable :: phy_fsic(:) ! Fraction de glace
243	real, allocatable :: phy_flic(:) ! Fraction de glace
244
245	!---------------------------------------------------------------------
246	! Fichiers et d'autres variables
247	!---------------------------------------------------------------------
248	integer :: k,l,i,it=1,mxcalc
249	integer :: nsrf
250	integer jcode
251	INTEGER read_climoz
252	!
253	integer :: it_end ! iteration number of the last call
254	!Al1
255	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
256	data ecrit_slab_oc/-1/
257	!
258	! if flag_inhib_forcing = 0, tendencies of forcing are added
259	! <> 0, tendencies of forcing are not added
260	INTEGER :: flag_inhib_forcing = 0
261
262
263	print*,'VOUS ENTREZ DANS LE 1D FORMAT STANDARD'
264
265	!=====================================================================
266	! INITIALIZATIONS
267	!=====================================================================
268	du_phys(:)=0.
269	dv_phys(:)=0.
270	dt_phys(:)=0.
271	dt_dyn(:)=0.
272	dt_cooling(:)=0.
273	d_t_adv(:)=0.
274	d_t_nudge(:)=0.
275	d_u_nudge(:)=0.
276	d_v_nudge(:)=0.
277	du_adv(:)=0.
278	dv_adv(:)=0.
279	du_age(:)=0.
280	dv_age(:)=0.
281
282	! Initialization of Common turb_forcing
283	dtime_frcg = 0.
284	Turb_fcg_gcssold=.false.
285	hthturb_gcssold = 0.
286	hqturb_gcssold = 0.
287
288
289
290
291	!---------------------------------------------------------------------
292	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
293	!---------------------------------------------------------------------
294	!Al1
295	call conf_unicol
296	!Al1 moves this gcssold var from common fcg_gcssold to
297	Turb_fcg_gcssold = xTurb_fcg_gcssold
298	! --------------------------------------------------------------------
299	close(1)
300	!Al1
301	write(,) 'lmdz1d.def lu => unicol.def'
302
303	forcing_SCM = .true.
304	year_ini_cas=1997
305	! It is possible that those parameters are run twice.
306
307	! A REVOIR : LIRE PEUT ETRE AN MOIS JOUR DIRECETEMENT
308	call getin('anneeref',year_ini_cas)
309	call getin('dayref',day_deb)
310	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
311	call getin('time_ini',heure_ini_cas)
312
313	type_ts_forcing = 0
314	IF (nat_surf==0) type_ts_forcing=1 ! SST forcee sur OCEAN
315	print*,'NATURE DE LA SURFACE ',nat_surf
316	!
317	! Initialization of the logical switch for nudging
318	jcode = iflag_nudge
319	do i = 1,nudge_max
320	nudge(i) = mod(jcode,10) .ge. 1
321	jcode = jcode/10
322	enddo
323	!---------------------------------------------------------------------
324	! Definition of the run
325	!---------------------------------------------------------------------
326
327	call conf_gcm( 99, .TRUE. )
328
329	!-----------------------------------------------------------------------
330	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
331	phy_nat(:)=0.0
332	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
333	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
334	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
335	phy_bil(:)=1.0
336	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
337	allocate( phy_ice (year_len)) ! Fraction de glace
338	phy_ice(:)=0.0
339	allocate( phy_fter(year_len)) ! Fraction de terre
340	phy_fter(:)=0.0
341	allocate( phy_foce(year_len)) ! Fraction de ocean
342	phy_foce(:)=0.0
343	allocate( phy_fsic(year_len)) ! Fraction de glace
344	phy_fsic(:)=0.0
345	allocate( phy_flic(year_len)) ! Fraction de glace
346	phy_flic(:)=0.0
347	!-----------------------------------------------------------------------
348	! Choix du calendrier
349	! -------------------
350
351	! calend = 'earth_365d'
352	if (calend == 'earth_360d') then
353	call ioconf_calendar('360d')
354	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
355	else if (calend == 'earth_365d') then
356	call ioconf_calendar('noleap')
357	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
358	else if (calend == 'earth_366d') then
359	call ioconf_calendar('all_leap')
360	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
361	else if (calend == 'gregorian') then
362	stop 'gregorian calend should not be used by normal user'
363	call ioconf_calendar('gregorian') ! not to be used by normal users
364	write(,)'CALENDRIER CHOISI: Gregorien'
365	else
366	write (,) 'ERROR : unknown calendar ', calend
367	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
368	endif
369	!-----------------------------------------------------------------------
370	!
371	!c Date :
372	! La date est supposee donnee sous la forme [annee, numero du jour dans
373	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
374	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
375	! Le numero du jour est dans "day". L heure est traitee separement.
376	! La date complete est dans "daytime" (l'unite est le jour).
377	if (nday>0) then
378	fnday=nday
379	else
380	fnday=-nday/float(day_step)
381	endif
382	print *,'fnday=',fnday
383	! start_time doit etre en FRACTION DE JOUR
384	start_time=time_ini/24.
385
386	annee_ref = anneeref
387	mois = 1
388	day_ref = dayref
389	heure = 0.
390	itau_dyn = 0
391	itau_phy = 0
392	call ymds2ju(annee_ref,mois,day_ref,heure,day)
393	day_ini = int(day)
394	day_end = day_ini + int(fnday)
395
396	! Convert the initial date to Julian day
397	day_ini_cas=day_deb
398	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
399	call ymds2ju &
400	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
401	& ,day_ju_ini_cas)
402	print*,'time case 2',day_ini_cas,day_ju_ini_cas
403	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
404
405	! Print out the actual date of the beginning of the simulation :
406	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
407	print *,' Time of beginning : ', &
408	& year_print, month_print, day_print, sec_print
409
410	!---------------------------------------------------------------------
411	! Initialization of dimensions, geometry and initial state
412	!---------------------------------------------------------------------
413	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
414	! but we still need to initialize dimphy module (klon,klev,etc.) here.
415	call init_dimphy1D(1,llm)
416	call suphel
417	call infotrac_init
418
419	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
420	allocate(q(llm,nqtot)) ; q(:,:)=0.
421	allocate(dq(llm,nqtot))
422	allocate(dq_dyn(llm,nqtot))
423	allocate(d_q_adv(llm,nqtot))
424	allocate(d_q_nudge(llm,nqtot))
425	! allocate(d_th_adv(llm))
426
427	q(:,:) = 0.
428	dq(:,:) = 0.
429	dq_dyn(:,:) = 0.
430	d_q_adv(:,:) = 0.
431	d_q_nudge(:,:) = 0.
432
433	!
434	! No ozone climatology need be read in this pre-initialization
435	! (phys_state_var_init is called again in physiq)
436	read_climoz = 0
437	!
438	call phys_state_var_init(read_climoz)
439
440	if (ngrid.ne.klon) then
441	print*,'stop in inifis'
442	print*,'Probleme de dimensions :'
443	print*,'ngrid = ',ngrid
444	print*,'klon = ',klon
445	stop
446	endif
447	!!!=====================================================================
448	!!! Feedback forcing values for Gateaux differentiation (al1)
449	!!!=====================================================================
450	!!! Surface Planck forcing bracketing call radiation
451	!! surf_Planck = 0.
452	!! surf_Conv = 0.
453	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
454	!!! a mettre dans le lmdz1d.def ou autre
455	!!
456	!!
457	qsol = qsolinp
458	qsurf = fq_sat(tsurf,psurf/100.)
459	day1= day_ini
460	time=daytime-day
461	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
462	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
463
464	!
465	!! mpl et jyg le 22/08/2012 :
466	!! pour que les cas a flux de surface imposes marchent
467	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
468	fsens=-wtsurfrcpdrho(1)
469	flat=-wqsurfrlvttrho(1)
470	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
471	ENDIF
472	print*,'Flux sol ',fsens,flat
473	!! ok_flux_surf=.false.
474	!! fsens=-wtsurfrcpdrho(1)
475	!! flat=-wqsurfrlvttrho(1)
476	!!!!
477
478	! Vertical discretization and pressure levels at half and mid levels:
479
480	pa = 5e4
481	!! preff= 1.01325e5
482	preff = psurf
483	IF (ok_old_disvert) THEN
484	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
485	print *,'On utilise disvert0'
486	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
487	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
488	scaleheight=8.
489	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
490	ELSE
491	call disvert()
492	print *,'On utilise disvert'
493	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
494	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
495	ENDIF
496
497	sig_s=presnivs/preff
498	plev =ap+bp*psurf
499	play = 0.5*(plev(1:llm)+plev(2:llm+1))
500	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
501
502	IF (forcing_type .eq. 59) THEN
503	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
504	write(,) '***********************'
505	do l = 1, llm
506	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
507	if (trouve_700 .and. play(l).le.70000) then
508	llm700=l
509	print *,'llm700,play=',llm700,play(l)/100.
510	trouve_700= .false.
511	endif
512	enddo
513	write(,) '***********************'
514	ENDIF
515
516	!
517	!=====================================================================
518	! EVENTUALLY, READ FORCING DATA :
519	!=====================================================================
520
521	#include "1D_read_forc_cases.h"
522	print,'A d_t_adv ',d_t_adv(1:20)86400
523
524	if (forcing_GCM2SCM) then
525	write (,) 'forcing_GCM2SCM not yet implemented'
526	stop 'in initialization'
527	endif ! forcing_GCM2SCM
528
529	print*,'mxcalc=',mxcalc
530	! print*,'zlay=',zlay(mxcalc)
531	print*,'play=',play(mxcalc)
532
533	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
534	ts_cur = tsurf ! SST used in read_tsurf1d
535	!=====================================================================
536	! Initialisation de la physique :
537	!=====================================================================
538
539	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
540	!
541	! day_step, iphysiq lus dans gcm.def ci-dessus
542	! timestep: calcule ci-dessous from rday et day_step
543	! ngrid=1
544	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
545	! rday: defini dans suphel.F (86400.)
546	! day_ini: lu dans run.def (dayref)
547	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
548	! airefi,zcufi,zcvfi initialises au debut de ce programme
549	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
550	day_step = float(nsplit_phys)*day_step/float(iphysiq)
551	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
552	timestep =rday/day_step
553	dtime_frcg = timestep
554	!
555	zcufi=airefi
556	zcvfi=airefi
557	!
558	rlat_rad(1)=xlat*rpi/180.
559	rlon_rad(1)=xlon*rpi/180.
560
561	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
562	year_len_phys_cal_mod=year_len
563
564	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
565	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
566	! with '0.' when necessary
567	call iniphysiq(iim,jjm,llm, &
568	1,comm_lmdz, &
569	rday,day_ini,timestep, &
570	(/rlat_rad(1),0./),(/0./), &
571	(/0.,0./),(/rlon_rad(1),0./), &
572	(/ (/airefi,0./),(/0.,0./) /), &
573	(/zcufi,0.,0.,0./), &
574	(/zcvfi,0./), &
575	ra,rg,rd,rcpd,1)
576	print*,'apres iniphysiq'
577
578	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
579	co2_ppm= 330.0
580	solaire=1370.0
581
582	! Ecriture du startphy avant le premier appel a la physique.
583	! On le met juste avant pour avoir acces a tous les champs
584
585	if (ok_writedem) then
586
587	!--------------------------------------------------------------------------
588	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
589	! need : qsol fder snow qsurf evap rugos agesno ftsoil
590	!--------------------------------------------------------------------------
591
592	type_ocean = "force"
593	run_off_lic_0(1) = restart_runoff
594	call fonte_neige_init(run_off_lic_0)
595
596	fder=0.
597	snsrf(1,:)=snowmass ! masse de neige des sous surface
598	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
599	fevap=0.
600	z0m(1,:)=rugos ! couverture de neige des sous surface
601	z0h(1,:)=rugosh ! couverture de neige des sous surface
602	agesno = xagesno
603	tsoil(:,:,:)=tsurf
604	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
605	! tsoil(1,1,1)=299.18
606	! tsoil(1,2,1)=300.08
607	! tsoil(1,3,1)=301.88
608	! tsoil(1,4,1)=305.48
609	! tsoil(1,5,1)=308.00
610	! tsoil(1,6,1)=308.00
611	! tsoil(1,7,1)=308.00
612	! tsoil(1,8,1)=308.00
613	! tsoil(1,9,1)=308.00
614	! tsoil(1,10,1)=308.00
615	! tsoil(1,11,1)=308.00
616	!-----------------------------------------------------------------------
617	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
618
619	!------------------ prepare limit conditions for limit.nc -----------------
620	!-- Ocean force
621
622	print*,'avant phyredem'
623	pctsrf(1,:)=0.
624	if (nat_surf.eq.0.) then
625	pctsrf(1,is_oce)=1.
626	pctsrf(1,is_ter)=0.
627	pctsrf(1,is_lic)=0.
628	pctsrf(1,is_sic)=0.
629	else if (nat_surf .eq. 1) then
630	pctsrf(1,is_oce)=0.
631	pctsrf(1,is_ter)=1.
632	pctsrf(1,is_lic)=0.
633	pctsrf(1,is_sic)=0.
634	else if (nat_surf .eq. 2) then
635	pctsrf(1,is_oce)=0.
636	pctsrf(1,is_ter)=0.
637	pctsrf(1,is_lic)=1.
638	pctsrf(1,is_sic)=0.
639	else if (nat_surf .eq. 3) then
640	pctsrf(1,is_oce)=0.
641	pctsrf(1,is_ter)=0.
642	pctsrf(1,is_lic)=0.
643	pctsrf(1,is_sic)=1.
644
645	end if
646
647
648	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
649	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
650
651	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
652	zpic = zpicinp
653	ftsol=tsurf
654	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
655	! 6 albedo, mais on peut quand meme tourner avec
656	! moins. Seules les 2 ou 4 premiers seront lus
657	falb_dir=albedo
658	falb_dif=albedo
659	rugoro=rugos
660	t_ancien(1,:)=temp(:)
661	q_ancien(1,:)=q(:,1)
662	ql_ancien = 0.
663	qs_ancien = 0.
664	prlw_ancien = 0.
665	prsw_ancien = 0.
666	prw_ancien = 0.
667	!jyg<
668	!! pbl_tke(:,:,:)=1.e-8
669	pbl_tke(:,:,:)=0.
670	pbl_tke(:,2,:)=1.e-2
671	PRINT *, ' pbl_tke dans lmdz1d '
672	if (prt_level .ge. 5) then
673	DO nsrf = 1,4
674	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
675	ENDDO
676	end if
677
678	!>jyg
679
680	rain_fall=0.
681	snow_fall=0.
682	solsw=0.
683	sollw=0.
684	sollwdown=rsigmatsurf*4
685	radsol=0.
686	rnebcon=0.
687	ratqs=0.
688	clwcon=0.
689	zmax0 = 0.
690	zmea=0.
691	zstd=0.
692	zsig=0.
693	zgam=0.
694	zval=0.
695	zthe=0.
696	sig1=0.
697	w01=0.
698	wake_cstar = 0.
699	wake_deltaq = 0.
700	wake_deltat = 0.
701	wake_delta_pbl_TKE(:,:,:) = 0.
702	delta_tsurf = 0.
703	wake_fip = 0.
704	wake_pe = 0.
705	wake_s = 0.
706	wake_dens = 0.
707	ale_bl = 0.
708	ale_bl_trig = 0.
709	alp_bl = 0.
710	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
711	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
712	entr_therm = 0.
713	detr_therm = 0.
714	f0 = 0.
715	fm_therm = 0.
716	u_ancien(1,:)=u(:)
717	v_ancien(1,:)=v(:)
718
719	u10m=0.
720	v10m=0.
721	ale_wake=0.
722	ale_bl_stat=0.
723
724	!------------------------------------------------------------------------
725	! Make file containing restart for the physics (startphy.nc)
726	!
727	! NB: List of the variables to be written by phyredem (via put_field):
728	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
729	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
730	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
731	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
732	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
733	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
734	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
735	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
736	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
737	!
738	! NB2: The content of the startphy.nc file depends on some flags defined in
739	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
740	! to be set at some arbitratry convenient values.
741	!------------------------------------------------------------------------
742	!Al1 =============== restart option ==========================
743	if (.not.restart) then
744	iflag_pbl = 5
745	call phyredem ("startphy.nc")
746	else
747	! (desallocations)
748	print*,'callin surf final'
749	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
750	print*,'after surf final'
751	CALL fonte_neige_final(run_off_lic_0)
752	endif
753
754	ok_writedem=.false.
755	print*,'apres phyredem'
756
757	endif ! ok_writedem
758
759	!------------------------------------------------------------------------
760	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
761	! --------------------------------------------------
762	! NB: List of the variables to be written in limit.nc
763	! (by writelim.F, subroutine of 1DUTILS.h):
764	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
765	! phy_fter,phy_foce,phy_flic,phy_fsic)
766	!------------------------------------------------------------------------
767	do i=1,year_len
768	phy_nat(i) = nat_surf
769	phy_alb(i) = albedo
770	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
771	phy_rug(i) = rugos
772	phy_fter(i) = pctsrf(1,is_ter)
773	phy_foce(i) = pctsrf(1,is_oce)
774	phy_fsic(i) = pctsrf(1,is_sic)
775	phy_flic(i) = pctsrf(1,is_lic)
776	enddo
777
778	! fabrication de limit.nc
779	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
780	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
781
782
783	call phys_state_var_end
784	!Al1
785	if (restart) then
786	print*,'call to restart dyn 1d'
787	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
788	& u,v,temp,q,omega2)
789
790	print*,'fnday,annee_ref,day_ref,day_ini', &
791	& fnday,annee_ref,day_ref,day_ini
792	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
793	day = day_ini
794	day_end = day_ini + nday
795	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
796
797	! Print out the actual date of the beginning of the simulation :
798	call ju2ymds(daytime, an, mois, jour, heure)
799	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
800
801	day = int(daytime)
802	time=daytime-day
803
804	print,'*** intialised fields from restart1dyn *****'
805	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
806	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
807	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
808	! raz for safety
809	do l=1,llm
810	dq_dyn(l,1) = 0.
811	enddo
812	endif
813	!Al1 ================ end restart =================================
814	IF (ecrit_slab_oc.eq.1) then
815	open(97,file='div_slab.dat',STATUS='UNKNOWN')
816	elseif (ecrit_slab_oc.eq.0) then
817	open(97,file='div_slab.dat',STATUS='OLD')
818	endif
819	!
820	!=====================================================================
821	CALL iophys_ini
822	! START OF THE TEMPORAL LOOP :
823	!=====================================================================
824
825	it_end = nint(fnday*day_step)
826	!test JLD it_end = 10
827	do while(it.le.it_end)
828
829	if (prt_level.ge.1) then
830	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
831	& it,day,time,it_end,day_step
832	print*,'PAS DE TEMPS ',timestep
833	endif
834	!Al1 demande de restartphy.nc
835	if (it.eq.it_end) lastcall=.True.
836
837	!---------------------------------------------------------------------
838	! Interpolation of forcings in time and onto model levels
839	!---------------------------------------------------------------------
840
841	#include "1D_interp_cases.h"
842	! Vertical advection
843	! call lstendH(llm,nqtot,omega,dt_dyn,dq_dyn,q,temp,u,v,play)
844	! print,'B d_t_adv ',d_t_adv(1:20)86400
845	! print,'B dt_dyn ',dt_dyn(1:20)86400
846	! print*,'B dt omega ',omega
847	teta=temp(pzero/play)*rkappa
848	do l=2,llm-1
849	dt_dyn(l)=-(omega(l)(teta(l+1)-teta(l-1))/(play(l+1)-play(l-1)))/(pzero/play(l))*rkappa
850	dq_dyn(l,1)=-omega(l)*(q(l+1,1)-q(l-1,1))/(play(l+1)-play(l-1))
851	enddo
852	d_t_adv(:)=d_t_adv(:)+dt_dyn(:)
853	d_q_adv(:,1)=d_q_adv(:,1)+dq_dyn(:,1)
854
855	print*,'OMEGA ',omega_mod_cas(10),omega(10)
856	!---------------------------------------------------------------------
857	! Geopotential :
858	!---------------------------------------------------------------------
859
860	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
861	do l = 1, llm-1
862	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
863	& (play(l)-play(l+1))/(play(l)+play(l+1))
864	enddo
865
866	!---------------------------------------------------------------------
867	! Listing output for debug prt_level>=1
868	!---------------------------------------------------------------------
869	if (prt_level>=1) then
870	print *,' avant physiq : -------- day time ',day,time
871	write(,) 'firstcall,lastcall,phis', &
872	& firstcall,lastcall,phis
873	end if
874	if (prt_level>=5) then
875	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
876	& 'presniv','plev','play','phi'
877	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
878	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
879	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
880	& 'presniv','u','v','temp','q1','q2','omega2'
881	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
882	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
883	endif
884
885	CALL iophys_ecrit('dtadv',klev,'dtadv','K/day',86400*d_t_adv)
886	CALL iophys_ecrit('dtdyn',klev,'dtdyn','K/day',86400*dt_dyn)
887
888	!---------------------------------------------------------------------
889	! Call physiq :
890	!---------------------------------------------------------------------
891	call physiq(ngrid,llm, &
892	firstcall,lastcall,timestep, &
893	plev,play,phi,phis,presnivs, &
894	u,v, rot, temp,q,omega2, &
895	du_phys,dv_phys,dt_phys,dq,dpsrf)
896	firstcall=.false.
897
898	!---------------------------------------------------------------------
899	! Listing output for debug
900	!---------------------------------------------------------------------
901	if (prt_level>=5) then
902	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
903	& 'presniv','plev','play','phi'
904	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
905	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
906	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
907	& 'presniv','u','v','temp','q1','q2','omega2'
908	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
909	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
910	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
911	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
912	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
913	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
914	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
915	write(,) 'dpsrf',dpsrf
916	endif
917	!---------------------------------------------------------------------
918	! Add physical tendencies :
919	!---------------------------------------------------------------------
920
921	fcoriolis=2.sin(rpixlat/180.)*romega
922
923	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
924	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
925	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
926	! if (forcing_radconv .or. forcing_fire) then
927	! fcoriolis=0.0
928	! dt_cooling=0.0
929	! d_t_adv=0.0
930	! d_q_adv=0.0
931	! endif
932	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
933
934	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
935	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
936	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
937	! if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
938	! & .or.forcing_amma .or. forcing_type.eq.101) then
939	! fcoriolis=0.0 ; ug=0. ; vg=0.
940	! endif
941	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
942
943	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
944	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
945	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
946	! if(forcing_rico) then
947	! dt_cooling=0.
948	! endif
949	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
950
951	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
952	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
953	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
954	!CRio:Attention modif sp??cifique cas de Caroline
955	! if (forcing_type==-1) then
956	! fcoriolis=0.
957	!
958	!on calcule dt_cooling
959	! do l=1,llm
960	! if (play(l).ge.20000.) then
961	! dt_cooling(l)=-1.5/86400.
962	! elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
963	! dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
964	! else
965	! dt_cooling(l)=-1.*(temp(l)-200.)/86400.
966	! endif
967	! enddo
968	!
969	! endif
970	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
971
972	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
973	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
974	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
975	! if (forcing_sandu) then
976	! ug(1:llm)=u_mod(1:llm)
977	! vg(1:llm)=v_mod(1:llm)
978	! endif
979	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
980
981	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
982	fcoriolis, xlat,mxcalc
983
984	! print *,'u-ug=',u-ug
985
986	!!!!!!!!!!!!!!!!!!!!!!!!
987	! Geostrophic wind
988	! Le calcul ci dessous est insuffisamment precis
989	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
990	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
991	!!!!!!!!!!!!!!!!!!!!!!!!
992	sfdt = sin(0.5fcoriolistimestep)
993	cfdt = cos(0.5fcoriolistimestep)
994	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
995	!
996	du_age(1:mxcalc)= -2.sfdt/timestep &
997	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
998	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
999	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1000	!
1001	dv_age(1:mxcalc)= -2.sfdt/timestep &
1002	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1003	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1004	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1005	!
1006	!!!!!!!!!!!!!!!!!!!!!!!!
1007	! Nudging
1008	!!!!!!!!!!!!!!!!!!!!!!!!
1009	d_t_nudge(:) = 0.
1010	d_u_nudge(:) = 0.
1011	d_v_nudge(:) = 0.
1012	d_q_nudge(:,:) = 0.
1013	DO l=1,llm
1014	IF ( play(l) < p_nudging_u .AND. nint(nudging_u) /= 0 ) &
1015	& d_u_nudge(l)=(u_nudg_mod_cas(l)-u(l))/nudging_u
1016	IF ( play(l) < p_nudging_v .AND. nint(nudging_v) /= 0 ) &
1017	& d_v_nudge(l)=(v_nudg_mod_cas(l)-v(l))/nudging_v
1018	IF ( play(l) < p_nudging_t .AND. nint(nudging_t) /= 0 ) &
1019	& d_t_nudge(l)=(temp_nudg_mod_cas(l)-temp(l))/nudging_t
1020	IF ( play(l) < p_nudging_qv .AND. nint(nudging_qv) /= 0 ) &
1021	& d_q_nudge(l,1)=(qv_nudg_mod_cas(l)-q(l,1))/nudging_qv
1022	ENDDO
1023	CALL iophys_ecrit('qv',klev,'qv','g/kg',1000*q(:,1))
1024	CALL iophys_ecrit('qvnud',klev,'qvnud','g/kg',1000*u_nudg_mod_cas)
1025	CALL iophys_ecrit('u',klev,'u','m/s',u)
1026	CALL iophys_ecrit('unud',klev,'unud','m/s',u_nudg_mod_cas)
1027	CALL iophys_ecrit('v',klev,'v','m/s',v)
1028	CALL iophys_ecrit('vnud',klev,'vnud','m/s',v_nudg_mod_cas)
1029	CALL iophys_ecrit('dtnud',klev,'dtnud','K/day',86400*d_t_nudge)
1030	CALL iophys_ecrit('dqnud',klev,'dqnud','K/day',100086400d_q_nudge(:,1))
1031
1032	!
1033	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1034	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1035	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1036	! if (forcing_fire) THEN
1037	! print*,'Enlever cette section rapidement'
1038	! stop
1039	!
1040	!
1041	!!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1042	!!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1043	!!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1044	! d_t_adv=0.
1045	! d_q_adv=0.
1046	! teta=temp(pzero/play)*rkappa
1047	! d_t_adv=0.
1048	! d_q_adv=0.
1049	! do l=2,llm-1
1050	! if (zlay(l)<=1100) then
1051	! wwww=-0.00001*zlay(l)
1052	! d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1053	! d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1054	! d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1055	! d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1056	! endif
1057	! enddo
1058	!
1059	! endif
1060	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1061
1062	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1063	! call writefield_phy('dv_age' ,dv_age,llm)
1064	! call writefield_phy('du_age' ,du_age,llm)
1065	! call writefield_phy('du_phys' ,du_phys,llm)
1066	! call writefield_phy('u_tend' ,u,llm)
1067	! call writefield_phy('u_g' ,ug,llm)
1068	!
1069	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1070	!! Increment state variables
1071	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1072	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1073
1074	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1075	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1076	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1077	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1078	! au dessus de 700hpa, on relaxe vers les profils initiaux
1079	! if (forcing_sandu .OR. forcing_astex) then
1080	!#include "1D_nudge_sandu_astex.h"
1081	! else
1082	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1083	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1084	& du_phys(1:mxcalc) &
1085	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1086	& +d_u_nudge(1:mxcalc) )
1087	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1088	& dv_phys(1:mxcalc) &
1089	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1090	& +d_v_nudge(1:mxcalc) )
1091	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1092	& dq(1:mxcalc,:) &
1093	& +d_q_adv(1:mxcalc,:) &
1094	& +d_q_nudge(1:mxcalc,:) )
1095
1096	if (prt_level.ge.3) then
1097	print *, &
1098	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1099	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1100	print* ,'dv_phys=',dv_phys
1101	print* ,'dv_age=',dv_age
1102	print* ,'dv_adv=',dv_adv
1103	print* ,'d_v_nudge=',d_v_nudge
1104	print*, v
1105	print*, vg
1106	endif
1107
1108	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1109	& dt_phys(1:mxcalc) &
1110	& +d_t_adv(1:mxcalc) &
1111	& +d_t_nudge(1:mxcalc) &
1112	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1113
1114
1115	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1116	!! CONSERVE EN ATTENDANT QUE LE CAS EN QUESTION FONCTIONNE EN STD !!
1117	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1118	! endif ! forcing_sandu or forcing_astex
1119	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1120
1121	teta=temp(pzero/play)*rkappa
1122	!
1123	!---------------------------------------------------------------------
1124	! Nudge soil temperature if requested
1125	!---------------------------------------------------------------------
1126
1127	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1128	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1129	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1130	ENDIF
1131
1132	!---------------------------------------------------------------------
1133	! Add large-scale tendencies (advection, etc) :
1134	!---------------------------------------------------------------------
1135
1136	!cc nrlmd
1137	!cc tmpvar=teta
1138	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1139	!cc
1140	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1141	!cc tmpvar(:)=q(:,1)
1142	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1143	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1144	!cc tmpvar(:)=q(:,2)
1145	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1146	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1147
1148	END IF ! end if tendency of tendency should be added
1149
1150	!---------------------------------------------------------------------
1151	! Air temperature :
1152	!---------------------------------------------------------------------
1153	if (lastcall) then
1154	print*,'Pas de temps final ',it
1155	call ju2ymds(daytime, an, mois, jour, heure)
1156	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1157	endif
1158
1159	! incremente day time
1160	! print*,'daytime bef',daytime,1./day_step
1161	daytime = daytime+1./day_step
1162	!Al1dbg
1163	day = int(daytime+0.1/day_step)
1164	! time = max(daytime-day,0.0)
1165	!Al1&jyg: correction de bug
1166	!cc time = real(mod(it,day_step))/day_step
1167	time = time_ini/24.+real(mod(it,day_step))/day_step
1168	! print*,'daytime nxt time',daytime,time
1169	it=it+1
1170
1171	enddo
1172
1173	!Al1
1174	if (ecrit_slab_oc.ne.-1) close(97)
1175
1176	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1177	! -------------------------------------
1178	call dyn1dredem("restart1dyn.nc", &
1179	& plev,play,phi,phis,presnivs, &
1180	& u,v,temp,q,omega2)
1181
1182	CALL abort_gcm ('lmdz1d ','The End ',0)
1183
1184	END SUBROUTINE scm

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format