Context Navigation

old_lmdz1d.F90 @ 3627

Last change on this file since 3627 was 3605, checked in by lguez, 5 years ago
Merge revisions 3427:3600 of trunk into branch `Ocean_skin`
File size: 50.2 KB

Line
1	!
2	! $Id: lmdz1d.F90 3540 2019-06-25 14:50:13Z fairhead $
3	!
4
5	SUBROUTINE old_lmdz1d
6
7	USE ioipsl, only: ju2ymds, ymds2ju, ioconf_calendar,getin
8	USE phys_state_var_mod, ONLY : phys_state_var_init, phys_state_var_end, &
9	clwcon, detr_therm, &
10	qsol, fevap, z0m, z0h, agesno, &
11	du_gwd_rando, du_gwd_front, entr_therm, f0, fm_therm, &
12	falb_dir, falb_dif, &
13	ftsol, pbl_tke, pctsrf, radsol, rain_fall, snow_fall, ratqs, &
14	rnebcon, rugoro, sig1, w01, solaire_etat0, sollw, sollwdown, &
15	solsw, t_ancien, q_ancien, u_ancien, v_ancien, wake_cstar, &
16	wake_delta_pbl_TKE, delta_tsurf, wake_fip, wake_pe, &
17	wake_deltaq, wake_deltat, wake_s, wake_dens, &
18	zgam, zmax0, zmea, zpic, zsig, &
19	zstd, zthe, zval, ale_bl, ale_bl_trig, alp_bl, ql_ancien, qs_ancien, &
20	prlw_ancien, prsw_ancien, prw_ancien, &
21	u10m,v10m,ale_wake,ale_bl_stat
22
23
24	USE dimphy
25	USE surface_data, only : type_ocean,ok_veget
26	USE pbl_surface_mod, only : ftsoil, pbl_surface_init, &
27	pbl_surface_final
28	USE fonte_neige_mod, only : fonte_neige_init, fonte_neige_final
29
30	USE infotrac ! new
31	USE control_mod
32	USE indice_sol_mod
33	USE phyaqua_mod
34	! USE mod_1D_cases_read
35	USE mod_1D_cases_read2
36	USE mod_1D_amma_read
37	USE print_control_mod, ONLY: lunout, prt_level
38	USE iniphysiq_mod, ONLY: iniphysiq
39	USE mod_const_mpi, ONLY: comm_lmdz
40	USE physiq_mod, ONLY: physiq
41	USE comvert_mod, ONLY: presnivs, ap, bp, dpres,nivsig, nivsigs, pa, &
42	preff, aps, bps, pseudoalt, scaleheight
43	USE temps_mod, ONLY: annee_ref, calend, day_end, day_ini, day_ref, &
44	itau_dyn, itau_phy, start_time, year_len
45	USE phys_cal_mod, ONLY : year_len_phys_cal_mod => year_len
46
47	implicit none
48	#include "dimensions.h"
49	#include "YOMCST.h"
50	!!#include "control.h"
51	#include "clesphys.h"
52	#include "dimsoil.h"
53	!#include "indicesol.h"
54
55	#include "compar1d.h"
56	#include "flux_arp.h"
57	#include "date_cas.h"
58	#include "tsoilnudge.h"
59	#include "fcg_gcssold.h"
60	!!!#include "fbforcing.h"
61	#include "compbl.h"
62
63	!=====================================================================
64	! DECLARATIONS
65	!=====================================================================
66
67	!---------------------------------------------------------------------
68	! Externals
69	!---------------------------------------------------------------------
70	external fq_sat
71	real fq_sat
72
73	!---------------------------------------------------------------------
74	! Arguments d' initialisations de la physique (USER DEFINE)
75	!---------------------------------------------------------------------
76
77	integer, parameter :: ngrid=1
78	real :: zcufi = 1.
79	real :: zcvfi = 1.
80
81	!- real :: nat_surf
82	!- logical :: ok_flux_surf
83	!- real :: fsens
84	!- real :: flat
85	!- real :: tsurf
86	!- real :: rugos
87	!- real :: qsol(1:2)
88	!- real :: qsurf
89	!- real :: psurf
90	!- real :: zsurf
91	!- real :: albedo
92	!-
93	!- real :: time = 0.
94	!- real :: time_ini
95	!- real :: xlat
96	!- real :: xlon
97	!- real :: wtsurf
98	!- real :: wqsurf
99	!- real :: restart_runoff
100	!- real :: xagesno
101	!- real :: qsolinp
102	!- real :: zpicinp
103	!-
104	real :: fnday
105	real :: day, daytime
106	real :: day1
107	real :: heure
108	integer :: jour
109	integer :: mois
110	integer :: an
111
112	!---------------------------------------------------------------------
113	! Declarations related to forcing and initial profiles
114	!---------------------------------------------------------------------
115
116	integer :: kmax = llm
117	integer llm700,nq1,nq2
118	INTEGER, PARAMETER :: nlev_max=1000, nqmx=1000
119	real timestep, frac
120	real height(nlev_max),tttprof(nlev_max),qtprof(nlev_max)
121	real uprof(nlev_max),vprof(nlev_max),e12prof(nlev_max)
122	real ugprof(nlev_max),vgprof(nlev_max),wfls(nlev_max)
123	real dqtdxls(nlev_max),dqtdyls(nlev_max)
124	real dqtdtls(nlev_max),thlpcar(nlev_max)
125	real qprof(nlev_max,nqmx)
126
127	! integer :: forcing_type
128	logical :: forcing_les = .false.
129	logical :: forcing_armcu = .false.
130	logical :: forcing_rico = .false.
131	logical :: forcing_radconv = .false.
132	logical :: forcing_toga = .false.
133	logical :: forcing_twpice = .false.
134	logical :: forcing_amma = .false.
135	logical :: forcing_dice = .false.
136	logical :: forcing_gabls4 = .false.
137
138	logical :: forcing_GCM2SCM = .false.
139	logical :: forcing_GCSSold = .false.
140	logical :: forcing_sandu = .false.
141	logical :: forcing_astex = .false.
142	logical :: forcing_fire = .false.
143	logical :: forcing_case = .false.
144	logical :: forcing_case2 = .false.
145	logical :: forcing_SCM = .false.
146	integer :: type_ts_forcing ! 0 = SST constant; 1 = SST read from a file
147	! (cf read_tsurf1d.F)
148
149	real wwww
150	!vertical advection computation
151	! real d_t_z(llm), d_q_z(llm)
152	! real d_t_dyn_z(llm), dq_dyn_z(llm)
153	! real zz(llm)
154	! real zfact
155
156	!flag forcings
157	logical :: nudge_wind=.true.
158	logical :: nudge_thermo=.false.
159	logical :: cptadvw=.true.
160	!=====================================================================
161	! DECLARATIONS FOR EACH CASE
162	!=====================================================================
163	!
164	#include "old_1D_decl_cases.h"
165	!
166	!---------------------------------------------------------------------
167	! Declarations related to nudging
168	!---------------------------------------------------------------------
169	integer :: nudge_max
170	parameter (nudge_max=9)
171	integer :: inudge_RHT=1
172	integer :: inudge_UV=2
173	logical :: nudge(nudge_max)
174	real :: t_targ(llm)
175	real :: rh_targ(llm)
176	real :: u_targ(llm)
177	real :: v_targ(llm)
178	!
179	!---------------------------------------------------------------------
180	! Declarations related to vertical discretization:
181	!---------------------------------------------------------------------
182	real :: pzero=1.e5
183	real :: play (llm),zlay (llm),sig_s(llm),plev(llm+1)
184	real :: playd(llm),zlayd(llm),ap_amma(llm+1),bp_amma(llm+1)
185
186	!---------------------------------------------------------------------
187	! Declarations related to variables
188	!---------------------------------------------------------------------
189
190	real :: phi(llm)
191	real :: teta(llm),tetal(llm),temp(llm),u(llm),v(llm),w(llm)
192	REAL rot(1, llm) ! relative vorticity, in s-1
193	real :: rlat_rad(1),rlon_rad(1)
194	real :: omega(llm+1),omega2(llm),rho(llm+1)
195	real :: ug(llm),vg(llm),fcoriolis
196	real :: sfdt, cfdt
197	real :: du_phys(llm),dv_phys(llm),dt_phys(llm)
198	real :: dt_dyn(llm)
199	real :: dt_cooling(llm),d_t_adv(llm),d_t_nudge(llm)
200	real :: d_u_nudge(llm),d_v_nudge(llm)
201	real :: du_adv(llm),dv_adv(llm)
202	real :: du_age(llm),dv_age(llm)
203	real :: alpha
204	real :: ttt
205
206	REAL, ALLOCATABLE, DIMENSION(:,:):: q
207	REAL, ALLOCATABLE, DIMENSION(:,:):: dq
208	REAL, ALLOCATABLE, DIMENSION(:,:):: dq_dyn
209	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_adv
210	REAL, ALLOCATABLE, DIMENSION(:,:):: d_q_nudge
211	! REAL, ALLOCATABLE, DIMENSION(:):: d_th_adv
212
213	!---------------------------------------------------------------------
214	! Initialization of surface variables
215	!---------------------------------------------------------------------
216	real :: run_off_lic_0(1)
217	real :: fder(1),snsrf(1,nbsrf),qsurfsrf(1,nbsrf)
218	real :: tsoil(1,nsoilmx,nbsrf)
219	! real :: agesno(1,nbsrf)
220
221	!---------------------------------------------------------------------
222	! Call to phyredem
223	!---------------------------------------------------------------------
224	logical :: ok_writedem =.true.
225	real :: sollw_in = 0.
226	real :: solsw_in = 0.
227
228	!---------------------------------------------------------------------
229	! Call to physiq
230	!---------------------------------------------------------------------
231	logical :: firstcall=.true.
232	logical :: lastcall=.false.
233	real :: phis(1) = 0.0
234	real :: dpsrf(1)
235
236	!---------------------------------------------------------------------
237	! Initializations of boundary conditions
238	!---------------------------------------------------------------------
239	real, allocatable :: phy_nat (:) ! 0=ocean libre,1=land,2=glacier,3=banquise
240	real, allocatable :: phy_alb (:) ! Albedo land only (old value condsurf_jyg=0.3)
241	real, allocatable :: phy_sst (:) ! SST (will not be used; cf read_tsurf1d.F)
242	real, allocatable :: phy_bil (:) ! Ne sert que pour les slab_ocean
243	real, allocatable :: phy_rug (:) ! Longueur rugosite utilisee sur land only
244	real, allocatable :: phy_ice (:) ! Fraction de glace
245	real, allocatable :: phy_fter(:) ! Fraction de terre
246	real, allocatable :: phy_foce(:) ! Fraction de ocean
247	real, allocatable :: phy_fsic(:) ! Fraction de glace
248	real, allocatable :: phy_flic(:) ! Fraction de glace
249
250	!---------------------------------------------------------------------
251	! Fichiers et d'autres variables
252	!---------------------------------------------------------------------
253	integer :: k,l,i,it=1,mxcalc
254	integer :: nsrf
255	integer jcode
256	INTEGER read_climoz
257	!
258	integer :: it_end ! iteration number of the last call
259	!Al1
260	integer ecrit_slab_oc !1=ecrit,-1=lit,0=no file
261	data ecrit_slab_oc/-1/
262	!
263	! if flag_inhib_forcing = 0, tendencies of forcing are added
264	! <> 0, tendencies of forcing are not added
265	INTEGER :: flag_inhib_forcing = 0
266
267	!=====================================================================
268	! INITIALIZATIONS
269	!=====================================================================
270	du_phys(:)=0.
271	dv_phys(:)=0.
272	dt_phys(:)=0.
273	dt_dyn(:)=0.
274	dt_cooling(:)=0.
275	d_t_adv(:)=0.
276	d_t_nudge(:)=0.
277	d_u_nudge(:)=0.
278	d_v_nudge(:)=0.
279	du_adv(:)=0.
280	dv_adv(:)=0.
281	du_age(:)=0.
282	dv_age(:)=0.
283
284	! Initialization of Common turb_forcing
285	dtime_frcg = 0.
286	Turb_fcg_gcssold=.false.
287	hthturb_gcssold = 0.
288	hqturb_gcssold = 0.
289
290
291
292
293	!---------------------------------------------------------------------
294	! OPTIONS OF THE 1D SIMULATION (lmdz1d.def => unicol.def)
295	!---------------------------------------------------------------------
296	!Al1
297	call conf_unicol
298	!Al1 moves this gcssold var from common fcg_gcssold to
299	Turb_fcg_gcssold = xTurb_fcg_gcssold
300	! --------------------------------------------------------------------
301	close(1)
302	!Al1
303	write(,) 'lmdz1d.def lu => unicol.def'
304
305	! forcing_type defines the way the SCM is forced:
306	!forcing_type = 0 ==> forcing_les = .true.
307	! initial profiles from file prof.inp.001
308	! no forcing by LS convergence ;
309	! surface temperature imposed ;
310	! radiative cooling may be imposed (iflag_radia=0 in physiq.def)
311	!forcing_type = 1 ==> forcing_radconv = .true.
312	! idem forcing_type = 0, but the imposed radiative cooling
313	! is set to 0 (hence, if iflag_radia=0 in physiq.def,
314	! then there is no radiative cooling at all)
315	!forcing_type = 2 ==> forcing_toga = .true.
316	! initial profiles from TOGA-COARE IFA files
317	! LS convergence and SST imposed from TOGA-COARE IFA files
318	!forcing_type = 3 ==> forcing_GCM2SCM = .true.
319	! initial profiles from the GCM output
320	! LS convergence imposed from the GCM output
321	!forcing_type = 4 ==> forcing_twpice = .true.
322	! initial profiles from TWP-ICE cdf file
323	! LS convergence, omega and SST imposed from TWP-ICE files
324	!forcing_type = 5 ==> forcing_rico = .true.
325	! initial profiles from RICO files
326	! LS convergence imposed from RICO files
327	!forcing_type = 6 ==> forcing_amma = .true.
328	! initial profiles from AMMA nc file
329	! LS convergence, omega and surface fluxes imposed from AMMA file
330	!forcing_type = 7 ==> forcing_dice = .true.
331	! initial profiles and large scale forcings in dice_driver.nc
332	! Different stages: soil model alone, atm. model alone
333	! then both models coupled
334	!forcing_type = 8 ==> forcing_gabls4 = .true.
335	! initial profiles and large scale forcings in gabls4_driver.nc
336	!forcing_type >= 100 ==> forcing_case = .true.
337	! initial profiles and large scale forcings in cas.nc
338	! LS convergence, omega and SST imposed from CINDY-DYNAMO files
339	! 101=cindynamo
340	! 102=bomex
341	!forcing_type >= 100 ==> forcing_case2 = .true.
342	! temporary flag while all the 1D cases are not whith the same cas.nc forcing file
343	! 103=arm_cu2 ie arm_cu with new forcing format
344	! 104=rico2 ie rico with new forcing format
345	!forcing_type = 40 ==> forcing_GCSSold = .true.
346	! initial profile from GCSS file
347	! LS convergence imposed from GCSS file
348	!forcing_type = 50 ==> forcing_fire = .true.
349	! forcing from fire.nc
350	!forcing_type = 59 ==> forcing_sandu = .true.
351	! initial profiles from sanduref file: see prof.inp.001
352	! SST varying with time and divergence constante: see ifa_sanduref.txt file
353	! Radiation has to be computed interactively
354	!forcing_type = 60 ==> forcing_astex = .true.
355	! initial profiles from file: see prof.inp.001
356	! SST,divergence,ug,vg,ufa,vfa varying with time : see ifa_astex.txt file
357	! Radiation has to be computed interactively
358	!forcing_type = 61 ==> forcing_armcu = .true.
359	! initial profiles from file: see prof.inp.001
360	! sensible and latent heat flux imposed: see ifa_arm_cu_1.txt
361	! large scale advective forcing & radiative tendencies applied below 1000m: see ifa_arm_cu_2.txt
362	! use geostrophic wind ug=10m/s vg=0m/s. Duration of the case 53100s
363	! Radiation to be switched off
364	!
365	if (forcing_type <=0) THEN
366	forcing_les = .true.
367	elseif (forcing_type .eq.1) THEN
368	forcing_radconv = .true.
369	elseif (forcing_type .eq.2) THEN
370	forcing_toga = .true.
371	elseif (forcing_type .eq.3) THEN
372	forcing_GCM2SCM = .true.
373	elseif (forcing_type .eq.4) THEN
374	forcing_twpice = .true.
375	elseif (forcing_type .eq.5) THEN
376	forcing_rico = .true.
377	elseif (forcing_type .eq.6) THEN
378	forcing_amma = .true.
379	elseif (forcing_type .eq.7) THEN
380	forcing_dice = .true.
381	elseif (forcing_type .eq.8) THEN
382	forcing_gabls4 = .true.
383	elseif (forcing_type .eq.101) THEN ! Cindynamo starts 1-10-2011 0h
384	forcing_case = .true.
385	year_ini_cas=2011
386	mth_ini_cas=10
387	day_deb=1
388	heure_ini_cas=0.
389	pdt_cas=3*3600. ! forcing frequency
390	elseif (forcing_type .eq.102) THEN ! Bomex starts 24-6-1969 0h
391	forcing_case = .true.
392	year_ini_cas=1969
393	mth_ini_cas=6
394	day_deb=24
395	heure_ini_cas=0.
396	pdt_cas=1800. ! forcing frequency
397	elseif (forcing_type .eq.103) THEN ! Arm_cu starts 21-6-1997 11h30
398	forcing_case2 = .true.
399	year_ini_cas=1997
400	mth_ini_cas=6
401	day_deb=21
402	heure_ini_cas=11.5
403	pdt_cas=1800. ! forcing frequency
404	elseif (forcing_type .eq.104) THEN ! rico starts 16-12-2004 0h
405	forcing_case2 = .true.
406	year_ini_cas=2004
407	mth_ini_cas=12
408	day_deb=16
409	heure_ini_cas=0.
410	pdt_cas=1800. ! forcing frequency
411	elseif (forcing_type .eq.105) THEN ! bomex starts 16-12-2004 0h
412	forcing_case2 = .true.
413	year_ini_cas=1969
414	mth_ini_cas=6
415	day_deb=24
416	heure_ini_cas=0.
417	pdt_cas=1800. ! forcing frequency
418	elseif (forcing_type .eq.106) THEN ! ayotte_24SC starts 6-11-1992 0h
419	forcing_case2 = .true.
420	year_ini_cas=1992
421	mth_ini_cas=11
422	day_deb=6
423	heure_ini_cas=10.
424	pdt_cas=86400. ! forcing frequency
425	elseif (forcing_type .eq.113) THEN ! Arm_cu starts 21-6-1997 11h30
426	forcing_SCM = .true.
427	year_ini_cas=1997
428	! It is possible that those parameters are run twice.
429	call getin('anneeref',year_ini_cas)
430	call getin('dayref',day_deb)
431	mth_ini_cas=1 ! pour le moment on compte depuis le debut de l'annee
432	call getin('time_ini',heure_ini_cas)
433	elseif (forcing_type .eq.40) THEN
434	forcing_GCSSold = .true.
435	elseif (forcing_type .eq.50) THEN
436	forcing_fire = .true.
437	elseif (forcing_type .eq.59) THEN
438	forcing_sandu = .true.
439	elseif (forcing_type .eq.60) THEN
440	forcing_astex = .true.
441	elseif (forcing_type .eq.61) THEN
442	forcing_armcu = .true.
443	IF(llm.NE.19.AND.llm.NE.40) stop 'Erreur nombre de niveaux !!'
444	else
445	write (,) 'ERROR : unknown forcing_type ', forcing_type
446	stop 'Forcing_type should be 0,1,2,3,4,5,6 or 40,59,60,61'
447	ENDIF
448	print*,"forcing type=",forcing_type
449
450	! if type_ts_forcing=0, the surface temp of 1D simulation is constant in time
451	! (specified by tsurf in lmdz1d.def); if type_ts_forcing=1, the surface temperature
452	! varies in time according to a forcing (e.g. forcing_toga) and is passed to read_tsurf1d.F
453	! through the common sst_forcing.
454
455	type_ts_forcing = 0
456	if (forcing_toga.or.forcing_sandu.or.forcing_astex .or. forcing_dice) &
457	& type_ts_forcing = 1
458	!
459	! Initialization of the logical switch for nudging
460	jcode = iflag_nudge
461	do i = 1,nudge_max
462	nudge(i) = mod(jcode,10) .ge. 1
463	jcode = jcode/10
464	enddo
465	!---------------------------------------------------------------------
466	! Definition of the run
467	!---------------------------------------------------------------------
468
469	call conf_gcm( 99, .TRUE. )
470
471	!-----------------------------------------------------------------------
472	allocate( phy_nat (year_len)) ! 0=ocean libre,1=land,2=glacier,3=banquise
473	phy_nat(:)=0.0
474	allocate( phy_alb (year_len)) ! Albedo land only (old value condsurf_jyg=0.3)
475	allocate( phy_sst (year_len)) ! SST (will not be used; cf read_tsurf1d.F)
476	allocate( phy_bil (year_len)) ! Ne sert que pour les slab_ocean
477	phy_bil(:)=1.0
478	allocate( phy_rug (year_len)) ! Longueur rugosite utilisee sur land only
479	allocate( phy_ice (year_len)) ! Fraction de glace
480	phy_ice(:)=0.0
481	allocate( phy_fter(year_len)) ! Fraction de terre
482	phy_fter(:)=0.0
483	allocate( phy_foce(year_len)) ! Fraction de ocean
484	phy_foce(:)=0.0
485	allocate( phy_fsic(year_len)) ! Fraction de glace
486	phy_fsic(:)=0.0
487	allocate( phy_flic(year_len)) ! Fraction de glace
488	phy_flic(:)=0.0
489	!-----------------------------------------------------------------------
490	! Choix du calendrier
491	! -------------------
492
493	! calend = 'earth_365d'
494	if (calend == 'earth_360d') then
495	call ioconf_calendar('360d')
496	write(,)'CALENDRIER CHOISI: Terrestre a 360 jours/an'
497	else if (calend == 'earth_365d') then
498	call ioconf_calendar('noleap')
499	write(,)'CALENDRIER CHOISI: Terrestre a 365 jours/an'
500	else if (calend == 'earth_366d') then
501	call ioconf_calendar('all_leap')
502	write(,)'CALENDRIER CHOISI: Terrestre bissextile'
503	else if (calend == 'gregorian') then
504	stop 'gregorian calend should not be used by normal user'
505	call ioconf_calendar('gregorian') ! not to be used by normal users
506	write(,)'CALENDRIER CHOISI: Gregorien'
507	else
508	write (,) 'ERROR : unknown calendar ', calend
509	stop 'calend should be 360d,earth_365d,earth_366d,gregorian'
510	endif
511	!-----------------------------------------------------------------------
512	!
513	!c Date :
514	! La date est supposee donnee sous la forme [annee, numero du jour dans
515	! l annee] ; l heure est donnee dans time_ini, lu dans lmdz1d.def.
516	! On appelle ymds2ju pour convertir [annee, jour] en [jour Julien].
517	! Le numero du jour est dans "day". L heure est traitee separement.
518	! La date complete est dans "daytime" (l'unite est le jour).
519	if (nday>0) then
520	fnday=nday
521	else
522	fnday=-nday/float(day_step)
523	endif
524	print *,'fnday=',fnday
525	! start_time doit etre en FRACTION DE JOUR
526	start_time=time_ini/24.
527
528	! Special case for arm_cu which lasts less than one day : 53100s !! (MPL 20111026)
529	IF(forcing_type .EQ. 61) fnday=53100./86400.
530	IF(forcing_type .EQ. 103) fnday=53100./86400.
531	! Special case for amma which lasts less than one day : 64800s !! (MPL 20120216)
532	IF(forcing_type .EQ. 6) fnday=64800./86400.
533	! IF(forcing_type .EQ. 6) fnday=50400./86400.
534	IF(forcing_type .EQ. 8 ) fnday=129600./86400.
535	annee_ref = anneeref
536	mois = 1
537	day_ref = dayref
538	heure = 0.
539	itau_dyn = 0
540	itau_phy = 0
541	call ymds2ju(annee_ref,mois,day_ref,heure,day)
542	day_ini = int(day)
543	day_end = day_ini + int(fnday)
544
545	IF (forcing_type .eq.2) THEN
546	! Convert the initial date of Toga-Coare to Julian day
547	call ymds2ju &
548	& (year_ini_toga,mth_ini_toga,day_ini_toga,heure,day_ju_ini_toga)
549
550	ELSEIF (forcing_type .eq.4) THEN
551	! Convert the initial date of TWPICE to Julian day
552	call ymds2ju &
553	& (year_ini_twpi,mth_ini_twpi,day_ini_twpi,heure_ini_twpi &
554	& ,day_ju_ini_twpi)
555	ELSEIF (forcing_type .eq.6) THEN
556	! Convert the initial date of AMMA to Julian day
557	call ymds2ju &
558	& (year_ini_amma,mth_ini_amma,day_ini_amma,heure_ini_amma &
559	& ,day_ju_ini_amma)
560	ELSEIF (forcing_type .eq.7) THEN
561	! Convert the initial date of DICE to Julian day
562	call ymds2ju &
563	& (year_ini_dice,mth_ini_dice,day_ini_dice,heure_ini_dice &
564	& ,day_ju_ini_dice)
565	ELSEIF (forcing_type .eq.8 ) THEN
566	! Convert the initial date of GABLS4 to Julian day
567	call ymds2ju &
568	& (year_ini_gabls4,mth_ini_gabls4,day_ini_gabls4,heure_ini_gabls4 &
569	& ,day_ju_ini_gabls4)
570	ELSEIF (forcing_type .gt.100) THEN
571	! Convert the initial date to Julian day
572	day_ini_cas=day_deb
573	print*,'time case',year_ini_cas,mth_ini_cas,day_ini_cas
574	call ymds2ju &
575	& (year_ini_cas,mth_ini_cas,day_ini_cas,heure_ini_cas*3600 &
576	& ,day_ju_ini_cas)
577	print*,'time case 2',day_ini_cas,day_ju_ini_cas
578	ELSEIF (forcing_type .eq.59) THEN
579	! Convert the initial date of Sandu case to Julian day
580	call ymds2ju &
581	& (year_ini_sandu,mth_ini_sandu,day_ini_sandu, &
582	& time_ini*3600.,day_ju_ini_sandu)
583
584	ELSEIF (forcing_type .eq.60) THEN
585	! Convert the initial date of Astex case to Julian day
586	call ymds2ju &
587	& (year_ini_astex,mth_ini_astex,day_ini_astex, &
588	& time_ini*3600.,day_ju_ini_astex)
589
590	ELSEIF (forcing_type .eq.61) THEN
591	! Convert the initial date of Arm_cu case to Julian day
592	call ymds2ju &
593	& (year_ini_armcu,mth_ini_armcu,day_ini_armcu,heure_ini_armcu &
594	& ,day_ju_ini_armcu)
595	ENDIF
596
597	IF (forcing_type .gt.100) THEN
598	daytime = day + heure_ini_cas/24. ! 1st day and initial time of the simulation
599	ELSE
600	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
601	ENDIF
602	! Print out the actual date of the beginning of the simulation :
603	call ju2ymds(daytime,year_print, month_print,day_print,sec_print)
604	print *,' Time of beginning : ', &
605	& year_print, month_print, day_print, sec_print
606
607	!---------------------------------------------------------------------
608	! Initialization of dimensions, geometry and initial state
609	!---------------------------------------------------------------------
610	! call init_phys_lmdz(1,1,llm,1,(/1/)) ! job now done via iniphysiq
611	! but we still need to initialize dimphy module (klon,klev,etc.) here.
612	call init_dimphy1D(1,llm)
613	call suphel
614	call infotrac_init
615
616	if (nqtot>nqmx) STOP 'Augmenter nqmx dans lmdz1d.F'
617	allocate(q(llm,nqtot)) ; q(:,:)=0.
618	allocate(dq(llm,nqtot))
619	allocate(dq_dyn(llm,nqtot))
620	allocate(d_q_adv(llm,nqtot))
621	allocate(d_q_nudge(llm,nqtot))
622	! allocate(d_th_adv(llm))
623
624	q(:,:) = 0.
625	dq(:,:) = 0.
626	dq_dyn(:,:) = 0.
627	d_q_adv(:,:) = 0.
628	d_q_nudge(:,:) = 0.
629
630	!
631	! No ozone climatology need be read in this pre-initialization
632	! (phys_state_var_init is called again in physiq)
633	read_climoz = 0
634	!
635	call phys_state_var_init(read_climoz)
636
637	if (ngrid.ne.klon) then
638	print*,'stop in inifis'
639	print*,'Probleme de dimensions :'
640	print*,'ngrid = ',ngrid
641	print*,'klon = ',klon
642	stop
643	endif
644	!!!=====================================================================
645	!!! Feedback forcing values for Gateaux differentiation (al1)
646	!!!=====================================================================
647	!!! Surface Planck forcing bracketing call radiation
648	!! surf_Planck = 0.
649	!! surf_Conv = 0.
650	!! write(,) 'Gateaux-dif Planck,Conv:',surf_Planck,surf_Conv
651	!!! a mettre dans le lmdz1d.def ou autre
652	!!
653	!!
654	qsol = qsolinp
655	qsurf = fq_sat(tsurf,psurf/100.)
656	day1= day_ini
657	time=daytime-day
658	ts_toga(1)=tsurf ! needed by read_tsurf1d.F
659	rho(1)=psurf/(rdtsurf(1.+(rv/rd-1.)*qsurf))
660
661	!
662	!! mpl et jyg le 22/08/2012 :
663	!! pour que les cas a flux de surface imposes marchent
664	IF(.NOT.ok_flux_surf.or.max(abs(wtsurf),abs(wqsurf))>0.) THEN
665	fsens=-wtsurfrcpdrho(1)
666	flat=-wqsurfrlvttrho(1)
667	print *,'Flux: ok_flux wtsurf wqsurf',ok_flux_surf,wtsurf,wqsurf
668	ENDIF
669	print*,'Flux sol ',fsens,flat
670	!! ok_flux_surf=.false.
671	!! fsens=-wtsurfrcpdrho(1)
672	!! flat=-wqsurfrlvttrho(1)
673	!!!!
674
675	! Vertical discretization and pressure levels at half and mid levels:
676
677	pa = 5e4
678	!! preff= 1.01325e5
679	preff = psurf
680	IF (ok_old_disvert) THEN
681	call disvert0(pa,preff,ap,bp,dpres,presnivs,nivsigs,nivsig)
682	print *,'On utilise disvert0'
683	aps(1:llm)=0.5*(ap(1:llm)+ap(2:llm+1))
684	bps(1:llm)=0.5*(bp(1:llm)+bp(2:llm+1))
685	scaleheight=8.
686	pseudoalt(1:llm)=-scaleheight*log(presnivs(1:llm)/preff)
687	ELSE
688	call disvert()
689	print *,'On utilise disvert'
690	! Nouvelle version disvert permettant d imposer ap,bp (modif L.Guez) MPL 18092012
691	! Dans ce cas, on lit ap,bp dans le fichier hybrid.txt
692	ENDIF
693
694	sig_s=presnivs/preff
695	plev =ap+bp*psurf
696	play = 0.5*(plev(1:llm)+plev(2:llm+1))
697	zlay=-rd300.log(play/psurf)/rg ! moved after reading profiles
698
699	IF (forcing_type .eq. 59) THEN
700	! pour forcing_sandu, on cherche l'indice le plus proche de 700hpa#3000m
701	write(,) '***********************'
702	do l = 1, llm
703	write(,) 'l,play(l),presnivs(l): ',l,play(l),presnivs(l)
704	if (trouve_700 .and. play(l).le.70000) then
705	llm700=l
706	print *,'llm700,play=',llm700,play(l)/100.
707	trouve_700= .false.
708	endif
709	enddo
710	write(,) '***********************'
711	ENDIF
712
713	!
714	!=====================================================================
715	! EVENTUALLY, READ FORCING DATA :
716	!=====================================================================
717
718	#include "old_1D_read_forc_cases.h"
719
720	if (forcing_GCM2SCM) then
721	write (,) 'forcing_GCM2SCM not yet implemented'
722	stop 'in initialization'
723	endif ! forcing_GCM2SCM
724
725	print*,'mxcalc=',mxcalc
726	! print*,'zlay=',zlay(mxcalc)
727	print*,'play=',play(mxcalc)
728
729	!Al1 pour SST forced, appell?? depuis ocean_forced_noice
730	ts_cur = tsurf ! SST used in read_tsurf1d
731	!=====================================================================
732	! Initialisation de la physique :
733	!=====================================================================
734
735	! Rq: conf_phys.F90 lit tous les flags de physiq.def; conf_phys appele depuis physiq.F
736	!
737	! day_step, iphysiq lus dans gcm.def ci-dessus
738	! timestep: calcule ci-dessous from rday et day_step
739	! ngrid=1
740	! llm: defini dans .../modipsl/modeles/LMDZ4/libf/grid/dimension
741	! rday: defini dans suphel.F (86400.)
742	! day_ini: lu dans run.def (dayref)
743	! rlat_rad,rlon-rad: transformes en radian de rlat,rlon lus dans lmdz1d.def (en degres)
744	! airefi,zcufi,zcvfi initialises au debut de ce programme
745	! rday,ra,rg,rd,rcpd declares dans YOMCST.h et calcules dans suphel.F
746	day_step = float(nsplit_phys)*day_step/float(iphysiq)
747	write (,) 'Time step divided by nsplit_phys (=',nsplit_phys,')'
748	timestep =rday/day_step
749	dtime_frcg = timestep
750	!
751	zcufi=airefi
752	zcvfi=airefi
753	!
754	rlat_rad(1)=xlat*rpi/180.
755	rlon_rad(1)=xlon*rpi/180.
756
757	! iniphysiq will call iniaqua who needs year_len from phys_cal_mod
758	year_len_phys_cal_mod=year_len
759
760	! Ehouarn: iniphysiq requires arrays related to (3D) dynamics grid,
761	! e.g. for cell boundaries, which are meaningless in 1D; so pad these
762	! with '0.' when necessary
763	call iniphysiq(iim,jjm,llm, &
764	1,comm_lmdz, &
765	rday,day_ini,timestep, &
766	(/rlat_rad(1),0./),(/0./), &
767	(/0.,0./),(/rlon_rad(1),0./), &
768	(/ (/airefi,0./),(/0.,0./) /), &
769	(/zcufi,0.,0.,0./), &
770	(/zcvfi,0./), &
771	ra,rg,rd,rcpd,1)
772	print*,'apres iniphysiq'
773
774	! 2 PARAMETRES QUI DEVRAIENT ETRE LUS DANS run.def MAIS NE LE SONT PAS ICI:
775	co2_ppm= 330.0
776	solaire=1370.0
777
778	! Ecriture du startphy avant le premier appel a la physique.
779	! On le met juste avant pour avoir acces a tous les champs
780
781	if (ok_writedem) then
782
783	!--------------------------------------------------------------------------
784	! pbl_surface_init (called here) and pbl_surface_final (called by phyredem)
785	! need : qsol fder snow qsurf evap rugos agesno ftsoil
786	!--------------------------------------------------------------------------
787
788	type_ocean = "force"
789	run_off_lic_0(1) = restart_runoff
790	call fonte_neige_init(run_off_lic_0)
791
792	fder=0.
793	snsrf(1,:)=snowmass ! masse de neige des sous surface
794	qsurfsrf(1,:)=qsurf ! humidite de l'air des sous surface
795	fevap=0.
796	z0m(1,:)=rugos ! couverture de neige des sous surface
797	z0h(1,:)=rugosh ! couverture de neige des sous surface
798	agesno = xagesno
799	tsoil(:,:,:)=tsurf
800	!------ AMMA 2e run avec modele sol et rayonnement actif (MPL 23052012)
801	! tsoil(1,1,1)=299.18
802	! tsoil(1,2,1)=300.08
803	! tsoil(1,3,1)=301.88
804	! tsoil(1,4,1)=305.48
805	! tsoil(1,5,1)=308.00
806	! tsoil(1,6,1)=308.00
807	! tsoil(1,7,1)=308.00
808	! tsoil(1,8,1)=308.00
809	! tsoil(1,9,1)=308.00
810	! tsoil(1,10,1)=308.00
811	! tsoil(1,11,1)=308.00
812	!-----------------------------------------------------------------------
813	call pbl_surface_init(fder, snsrf, qsurfsrf, tsoil)
814
815	!------------------ prepare limit conditions for limit.nc -----------------
816	!-- Ocean force
817
818	print*,'avant phyredem'
819	pctsrf(1,:)=0.
820	if (nat_surf.eq.0.) then
821	pctsrf(1,is_oce)=1.
822	pctsrf(1,is_ter)=0.
823	pctsrf(1,is_lic)=0.
824	pctsrf(1,is_sic)=0.
825	else if (nat_surf .eq. 1) then
826	pctsrf(1,is_oce)=0.
827	pctsrf(1,is_ter)=1.
828	pctsrf(1,is_lic)=0.
829	pctsrf(1,is_sic)=0.
830	else if (nat_surf .eq. 2) then
831	pctsrf(1,is_oce)=0.
832	pctsrf(1,is_ter)=0.
833	pctsrf(1,is_lic)=1.
834	pctsrf(1,is_sic)=0.
835	else if (nat_surf .eq. 3) then
836	pctsrf(1,is_oce)=0.
837	pctsrf(1,is_ter)=0.
838	pctsrf(1,is_lic)=0.
839	pctsrf(1,is_sic)=1.
840
841	end if
842
843
844	print*,'nat_surf,pctsrf(1,is_oce),pctsrf(1,is_ter)',nat_surf &
845	& ,pctsrf(1,is_oce),pctsrf(1,is_ter)
846
847	zmasq=pctsrf(1,is_ter)+pctsrf(1,is_lic)
848	zpic = zpicinp
849	ftsol=tsurf
850	nsw=6 ! on met le nb de bandes SW=6, pour initialiser
851	! 6 albedo, mais on peut quand meme tourner avec
852	! moins. Seules les 2 ou 4 premiers seront lus
853	falb_dir=albedo
854	falb_dif=albedo
855	rugoro=rugos
856	t_ancien(1,:)=temp(:)
857	q_ancien(1,:)=q(:,1)
858	ql_ancien = 0.
859	qs_ancien = 0.
860	prlw_ancien = 0.
861	prsw_ancien = 0.
862	prw_ancien = 0.
863	!jyg<
864	!! pbl_tke(:,:,:)=1.e-8
865	pbl_tke(:,:,:)=0.
866	pbl_tke(:,2,:)=1.e-2
867	PRINT *, ' pbl_tke dans lmdz1d '
868	if (prt_level .ge. 5) then
869	DO nsrf = 1,4
870	PRINT *,'pbl_tke(1,:,',nsrf,') ',pbl_tke(1,:,nsrf)
871	ENDDO
872	end if
873
874	!>jyg
875
876	rain_fall=0.
877	snow_fall=0.
878	solsw=0.
879	sollw=0.
880	sollwdown=rsigmatsurf*4
881	radsol=0.
882	rnebcon=0.
883	ratqs=0.
884	clwcon=0.
885	zmax0 = 0.
886	zmea=0.
887	zstd=0.
888	zsig=0.
889	zgam=0.
890	zval=0.
891	zthe=0.
892	sig1=0.
893	w01=0.
894	wake_cstar = 0.
895	wake_deltaq = 0.
896	wake_deltat = 0.
897	wake_delta_pbl_TKE(:,:,:) = 0.
898	delta_tsurf = 0.
899	wake_fip = 0.
900	wake_pe = 0.
901	wake_s = 0.
902	wake_dens = 0.
903	ale_bl = 0.
904	ale_bl_trig = 0.
905	alp_bl = 0.
906	IF (ALLOCATED(du_gwd_rando)) du_gwd_rando = 0.
907	IF (ALLOCATED(du_gwd_front)) du_gwd_front = 0.
908	entr_therm = 0.
909	detr_therm = 0.
910	f0 = 0.
911	fm_therm = 0.
912	u_ancien(1,:)=u(:)
913	v_ancien(1,:)=v(:)
914
915	u10m=0.
916	v10m=0.
917	ale_wake=0.
918	ale_bl_stat=0.
919
920	!------------------------------------------------------------------------
921	! Make file containing restart for the physics (startphy.nc)
922	!
923	! NB: List of the variables to be written by phyredem (via put_field):
924	! rlon,rlat,zmasq,pctsrf(:,is_ter),pctsrf(:,is_lic),pctsrf(:,is_oce)
925	! pctsrf(:,is_sic),ftsol(:,nsrf),tsoil(:,isoil,nsrf),qsurf(:,nsrf)
926	! qsol,falb_dir(:,nsrf),falb_dif(:,nsrf),evap(:,nsrf),snow(:,nsrf)
927	! radsol,solsw,sollw, sollwdown,fder,rain_fall,snow_fall,frugs(:,nsrf)
928	! agesno(:,nsrf),zmea,zstd,zsig,zgam,zthe,zpic,zval,rugoro
929	! t_ancien,q_ancien,,frugs(:,is_oce),clwcon(:,1),rnebcon(:,1),ratqs(:,1)
930	! run_off_lic_0,pbl_tke(:,1:klev,nsrf), zmax0,f0,sig1,w01
931	! wake_deltat,wake_deltaq,wake_s,wake_dens,wake_cstar,
932	! wake_fip,wake_delta_pbl_tke(:,1:klev,nsrf)
933	!
934	! NB2: The content of the startphy.nc file depends on some flags defined in
935	! the ".def" files. However, since conf_phys is not called in lmdz1d.F90, these flags have
936	! to be set at some arbitratry convenient values.
937	!------------------------------------------------------------------------
938	!Al1 =============== restart option ==========================
939	if (.not.restart) then
940	iflag_pbl = 5
941	call phyredem ("startphy.nc")
942	else
943	! (desallocations)
944	print*,'callin surf final'
945	call pbl_surface_final( fder, snsrf, qsurfsrf, tsoil)
946	print*,'after surf final'
947	CALL fonte_neige_final(run_off_lic_0)
948	endif
949
950	ok_writedem=.false.
951	print*,'apres phyredem'
952
953	endif ! ok_writedem
954
955	!------------------------------------------------------------------------
956	! Make file containing boundary conditions (limit.nc) Al1->restartdyn*
957	! --------------------------------------------------
958	! NB: List of the variables to be written in limit.nc
959	! (by writelim.F, subroutine of 1DUTILS.h):
960	! phy_nat,phy_alb,phy_sst,phy_bil,phy_rug,phy_ice,
961	! phy_fter,phy_foce,phy_flic,phy_fsic)
962	!------------------------------------------------------------------------
963	do i=1,year_len
964	phy_nat(i) = nat_surf
965	phy_alb(i) = albedo
966	phy_sst(i) = tsurf ! read_tsurf1d will be used instead
967	phy_rug(i) = rugos
968	phy_fter(i) = pctsrf(1,is_ter)
969	phy_foce(i) = pctsrf(1,is_oce)
970	phy_fsic(i) = pctsrf(1,is_sic)
971	phy_flic(i) = pctsrf(1,is_lic)
972	enddo
973
974	! fabrication de limit.nc
975	call writelim (1,phy_nat,phy_alb,phy_sst,phy_bil,phy_rug, &
976	& phy_ice,phy_fter,phy_foce,phy_flic,phy_fsic)
977
978
979	call phys_state_var_end
980	!Al1
981	if (restart) then
982	print*,'call to restart dyn 1d'
983	Call dyn1deta0("start1dyn.nc",plev,play,phi,phis,presnivs, &
984	& u,v,temp,q,omega2)
985
986	print*,'fnday,annee_ref,day_ref,day_ini', &
987	& fnday,annee_ref,day_ref,day_ini
988	!** call ymds2ju(annee_ref,mois,day_ini,heure,day)
989	day = day_ini
990	day_end = day_ini + nday
991	daytime = day + time_ini/24. ! 1st day and initial time of the simulation
992
993	! Print out the actual date of the beginning of the simulation :
994	call ju2ymds(daytime, an, mois, jour, heure)
995	print *,' Time of beginning : y m d h',an, mois,jour,heure/3600.
996
997	day = int(daytime)
998	time=daytime-day
999
1000	print,'*** intialised fields from restart1dyn *****'
1001	print*,'plev,play,phi,phis,presnivs,u,v,temp,q,omega2'
1002	print*,'temp(1),q(1,1),u(1),v(1),plev(1),phis :'
1003	print*,temp(1),q(1,1),u(1),v(1),plev(1),phis
1004	! raz for safety
1005	do l=1,llm
1006	dq_dyn(l,1) = 0.
1007	enddo
1008	endif
1009	!Al1 ================ end restart =================================
1010	IF (ecrit_slab_oc.eq.1) then
1011	open(97,file='div_slab.dat',STATUS='UNKNOWN')
1012	elseif (ecrit_slab_oc.eq.0) then
1013	open(97,file='div_slab.dat',STATUS='OLD')
1014	endif
1015	!
1016	!---------------------------------------------------------------------
1017	! Initialize target profile for RHT nudging if needed
1018	!---------------------------------------------------------------------
1019	if (nudge(inudge_RHT)) then
1020	call nudge_RHT_init(plev,play,temp,q(:,1),t_targ,rh_targ)
1021	endif
1022	if (nudge(inudge_UV)) then
1023	call nudge_UV_init(plev,play,u,v,u_targ,v_targ)
1024	endif
1025	!
1026	!=====================================================================
1027	CALL iophys_ini
1028	! START OF THE TEMPORAL LOOP :
1029	!=====================================================================
1030
1031	it_end = nint(fnday*day_step)
1032	!test JLD it_end = 10
1033	do while(it.le.it_end)
1034
1035	if (prt_level.ge.1) then
1036	print*,'XXXXXXXXXXXXXXXXXXX ITAP,day,time=', &
1037	& it,day,time,it_end,day_step
1038	print*,'PAS DE TEMPS ',timestep
1039	endif
1040	!Al1 demande de restartphy.nc
1041	if (it.eq.it_end) lastcall=.True.
1042
1043	!---------------------------------------------------------------------
1044	! Interpolation of forcings in time and onto model levels
1045	!---------------------------------------------------------------------
1046
1047	#include "old_1D_interp_cases.h"
1048
1049	if (forcing_GCM2SCM) then
1050	write (,) 'forcing_GCM2SCM not yet implemented'
1051	stop 'in time loop'
1052	endif ! forcing_GCM2SCM
1053
1054	!---------------------------------------------------------------------
1055	! Geopotential :
1056	!---------------------------------------------------------------------
1057
1058	phi(1)=RDtemp(1)(plev(1)-play(1))/(.5*(plev(1)+play(1)))
1059	do l = 1, llm-1
1060	phi(l+1)=phi(l)+RD(temp(l)+temp(l+1)) &
1061	& (play(l)-play(l+1))/(play(l)+play(l+1))
1062	enddo
1063
1064	!---------------------------------------------------------------------
1065	! Listing output for debug prt_level>=1
1066	!---------------------------------------------------------------------
1067	if (prt_level>=1) then
1068	print *,' avant physiq : -------- day time ',day,time
1069	write(,) 'firstcall,lastcall,phis', &
1070	& firstcall,lastcall,phis
1071	end if
1072	if (prt_level>=5) then
1073	write(*,'(a10,2a4,4a13)') 'BEFOR1 IT=','it','l', &
1074	& 'presniv','plev','play','phi'
1075	write(*,'(a10,2i4,4f13.2)') ('BEFOR1 IT= ',it,l, &
1076	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1077	write(*,'(a11,2a4,a11,6a8)') 'BEFOR2','it','l', &
1078	& 'presniv','u','v','temp','q1','q2','omega2'
1079	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('BEFOR2 IT= ',it,l, &
1080	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1081	endif
1082
1083	!---------------------------------------------------------------------
1084	! Call physiq :
1085	!---------------------------------------------------------------------
1086	call physiq(ngrid,llm, &
1087	firstcall,lastcall,timestep, &
1088	plev,play,phi,phis,presnivs, &
1089	u,v, rot, temp,q,omega2, &
1090	du_phys,dv_phys,dt_phys,dq,dpsrf)
1091	firstcall=.false.
1092
1093	!---------------------------------------------------------------------
1094	! Listing output for debug
1095	!---------------------------------------------------------------------
1096	if (prt_level>=5) then
1097	write(*,'(a11,2a4,4a13)') 'AFTER1 IT=','it','l', &
1098	& 'presniv','plev','play','phi'
1099	write(*,'(a11,2i4,4f13.2)') ('AFTER1 it= ',it,l, &
1100	& presnivs(l),plev(l),play(l),phi(l),l=1,llm)
1101	write(*,'(a11,2a4,a11,6a8)') 'AFTER2','it','l', &
1102	& 'presniv','u','v','temp','q1','q2','omega2'
1103	write(*,'(a11,2i4,f11.2,5f8.2,e10.2)') ('AFTER2 it= ',it,l, &
1104	& presnivs(l),u(l),v(l),temp(l),q(l,1),q(l,2),omega2(l),l=1,llm)
1105	write(*,'(a11,2a4,a11,5a8)') 'AFTER3','it','l', &
1106	& 'presniv','du_phys','dv_phys','dt_phys','dq1','dq2'
1107	write(*,'(a11,2i4,f11.2,5f8.2)') ('AFTER3 it= ',it,l, &
1108	& presnivs(l),86400du_phys(l),86400dv_phys(l), &
1109	& 86400dt_phys(l),86400dq(l,1),dq(l,2),l=1,llm)
1110	write(,) 'dpsrf',dpsrf
1111	endif
1112	!---------------------------------------------------------------------
1113	! Add physical tendencies :
1114	!---------------------------------------------------------------------
1115
1116	fcoriolis=2.sin(rpixlat/180.)*romega
1117	if (forcing_radconv .or. forcing_fire) then
1118	fcoriolis=0.0
1119	dt_cooling=0.0
1120	d_t_adv=0.0
1121	d_q_adv=0.0
1122	endif
1123	! print*, 'calcul de fcoriolis ', fcoriolis
1124
1125	if (forcing_toga .or. forcing_GCSSold .or. forcing_twpice &
1126	& .or.forcing_amma .or. forcing_type.eq.101) then
1127	fcoriolis=0.0 ; ug=0. ; vg=0.
1128	endif
1129
1130	if(forcing_rico) then
1131	dt_cooling=0.
1132	endif
1133
1134	!CRio:Attention modif sp??cifique cas de Caroline
1135	if (forcing_type==-1) then
1136	fcoriolis=0.
1137	!Nudging
1138
1139	!on calcule dt_cooling
1140	do l=1,llm
1141	if (play(l).ge.20000.) then
1142	dt_cooling(l)=-1.5/86400.
1143	elseif ((play(l).ge.10000.).and.((play(l).lt.20000.))) then
1144	dt_cooling(l)=-1.5/86400.(play(l)-10000.)/(10000.)-1./86400.(20000.-play(l))/10000.*(temp(l)-200.)
1145	else
1146	dt_cooling(l)=-1.*(temp(l)-200.)/86400.
1147	endif
1148	enddo
1149
1150	endif
1151	!RC
1152	if (forcing_sandu) then
1153	ug(1:llm)=u_mod(1:llm)
1154	vg(1:llm)=v_mod(1:llm)
1155	endif
1156
1157	IF (prt_level >= 5) print*, 'fcoriolis, xlat,mxcalc ', &
1158	fcoriolis, xlat,mxcalc
1159
1160	! print *,'u-ug=',u-ug
1161
1162	!!!!!!!!!!!!!!!!!!!!!!!!
1163	! Geostrophic wind
1164	! Le calcul ci dessous est insuffisamment precis
1165	! du_age(1:mxcalc)=fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1166	! dv_age(1:mxcalc)=-fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1167	!!!!!!!!!!!!!!!!!!!!!!!!
1168	sfdt = sin(0.5fcoriolistimestep)
1169	cfdt = cos(0.5fcoriolistimestep)
1170	! print *,'fcoriolis,sfdt,cfdt,timestep',fcoriolis,sfdt,cfdt,timestep
1171	!
1172	du_age(1:mxcalc)= -2.sfdt/timestep &
1173	& (sfdt*(u(1:mxcalc)-ug(1:mxcalc)) - &
1174	& cfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1175	!! : fcoriolis*(v(1:mxcalc)-vg(1:mxcalc))
1176	!
1177	dv_age(1:mxcalc)= -2.sfdt/timestep &
1178	& (cfdt*(u(1:mxcalc)-ug(1:mxcalc)) + &
1179	& sfdt*(v(1:mxcalc)-vg(1:mxcalc)) )
1180	!! : -fcoriolis*(u(1:mxcalc)-ug(1:mxcalc))
1181	!
1182	!!!!!!!!!!!!!!!!!!!!!!!!
1183	! Nudging
1184	!!!!!!!!!!!!!!!!!!!!!!!!
1185	d_t_nudge(:) = 0.
1186	d_q_nudge(:,:) = 0.
1187	d_u_nudge(:) = 0.
1188	d_v_nudge(:) = 0.
1189	if (nudge(inudge_RHT)) then
1190	call nudge_RHT(timestep,plev,play,t_targ,rh_targ,temp,q(:,1), &
1191	& d_t_nudge,d_q_nudge(:,1))
1192	endif
1193	if (nudge(inudge_UV)) then
1194	call nudge_UV(timestep,plev,play,u_targ,v_targ,u,v, &
1195	& d_u_nudge,d_v_nudge)
1196	endif
1197	!
1198	if (forcing_fire) THEN
1199
1200	!let ww=if ( alt le 1100 ) then alt*-0.00001 else 0
1201	!let wt=if ( alt le 1100 ) then min( -3.75e-5 , -7.5e-8*alt) else 0
1202	!let wq=if ( alt le 1100 ) then max( 1.5e-8 , 3e-11*alt) else 0
1203	d_t_adv=0.
1204	d_q_adv=0.
1205	teta=temp(pzero/play)*rkappa
1206	d_t_adv=0.
1207	d_q_adv=0.
1208	do l=2,llm-1
1209	if (zlay(l)<=1100) then
1210	wwww=-0.00001*zlay(l)
1211	d_t_adv(l)=-wwww(teta(l)-teta(l+1))/(zlay(l)-zlay(l+1)) /(pzero/play(l))*rkappa
1212	d_q_adv(l,1:2)=-wwww*(q(l,1:2)-q(l+1,1:2))/(zlay(l)-zlay(l+1))
1213	d_t_adv(l)=d_t_adv(l)+min(-3.75e-5 , -7.5e-8*zlay(l))
1214	d_q_adv(l,1)=d_q_adv(l,1)+max( 1.5e-8 , 3e-11*zlay(l))
1215	endif
1216	enddo
1217
1218	endif
1219
1220	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1221	! call writefield_phy('dv_age' ,dv_age,llm)
1222	! call writefield_phy('du_age' ,du_age,llm)
1223	! call writefield_phy('du_phys' ,du_phys,llm)
1224	! call writefield_phy('u_tend' ,u,llm)
1225	! call writefield_phy('u_g' ,ug,llm)
1226	!
1227	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1228	!! Increment state variables
1229	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1230	print*,'OLDLMDZ1D AANT'
1231	IF (flag_inhib_forcing == 0) then ! if tendency of forcings should be added
1232	print*,'OLDLMDZ1D ARES' , forcing_sandu
1233
1234	! pour les cas sandu et astex, on reclacule u,v,q,temp et teta dans 1D_nudge_sandu_astex.h
1235	! au dessus de 700hpa, on relaxe vers les profils initiaux
1236	if (forcing_sandu .OR. forcing_astex) then
1237	#include "1D_nudge_sandu_astex.h"
1238	else
1239	u(1:mxcalc)=u(1:mxcalc) + timestep*( &
1240	& du_phys(1:mxcalc) &
1241	& +du_age(1:mxcalc)+du_adv(1:mxcalc) &
1242	& +d_u_nudge(1:mxcalc) )
1243	v(1:mxcalc)=v(1:mxcalc) + timestep*( &
1244	& dv_phys(1:mxcalc) &
1245	& +dv_age(1:mxcalc)+dv_adv(1:mxcalc) &
1246	& +d_v_nudge(1:mxcalc) )
1247	q(1:mxcalc,:)=q(1:mxcalc,:)+timestep*( &
1248	& dq(1:mxcalc,:) &
1249	& +d_q_adv(1:mxcalc,:) &
1250	& +d_q_nudge(1:mxcalc,:) )
1251
1252	if (prt_level.ge.3) then
1253	print *, &
1254	& 'physiq-> temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1) ', &
1255	& temp(1),dt_phys(1),d_t_adv(1),dt_cooling(1)
1256	print* ,'dv_phys=',dv_phys
1257	print* ,'dv_age=',dv_age
1258	print* ,'dv_adv=',dv_adv
1259	print* ,'d_v_nudge=',d_v_nudge
1260	print*, v
1261	print*, vg
1262	endif
1263
1264	temp(1:mxcalc)=temp(1:mxcalc)+timestep*( &
1265	& dt_phys(1:mxcalc) &
1266	& +d_t_adv(1:mxcalc) &
1267	& +d_t_nudge(1:mxcalc) &
1268	& +dt_cooling(1:mxcalc)) ! Taux de chauffage ou refroid.
1269
1270	print*,'OLDLMDZ1D IOPH'
1271	CALL iophys_ecrit('d_t_adv',klev,'d_t_adv','m/s',d_t_adv)
1272	CALL iophys_ecrit('d_t_nudge',klev,'d_t_nudge','m/s',d_t_nudge)
1273
1274	endif ! forcing_sandu or forcing_astex
1275
1276	teta=temp(pzero/play)*rkappa
1277	!
1278	!---------------------------------------------------------------------
1279	! Nudge soil temperature if requested
1280	!---------------------------------------------------------------------
1281
1282	IF (nudge_tsoil .AND. .NOT. lastcall) THEN
1283	ftsoil(1,isoil_nudge,:) = ftsoil(1,isoil_nudge,:) &
1284	& -timestep/tau_soil_nudge*(ftsoil(1,isoil_nudge,:)-Tsoil_nudge)
1285	ENDIF
1286
1287	!---------------------------------------------------------------------
1288	! Add large-scale tendencies (advection, etc) :
1289	!---------------------------------------------------------------------
1290
1291	!cc nrlmd
1292	!cc tmpvar=teta
1293	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1294	!cc
1295	!cc teta(1:mxcalc)=tmpvar(1:mxcalc)
1296	!cc tmpvar(:)=q(:,1)
1297	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1298	!cc q(1:mxcalc,1)=tmpvar(1:mxcalc)
1299	!cc tmpvar(:)=q(:,2)
1300	!cc call advect_vert(llm,omega,timestep,tmpvar,plev)
1301	!cc q(1:mxcalc,2)=tmpvar(1:mxcalc)
1302
1303	END IF ! end if tendency of tendency should be added
1304
1305	!---------------------------------------------------------------------
1306	! Air temperature :
1307	!---------------------------------------------------------------------
1308	if (lastcall) then
1309	print*,'Pas de temps final ',it
1310	call ju2ymds(daytime, an, mois, jour, heure)
1311	print*,'a la date : a m j h',an, mois, jour ,heure/3600.
1312	endif
1313
1314	! incremente day time
1315	! print*,'daytime bef',daytime,1./day_step
1316	daytime = daytime+1./day_step
1317	!Al1dbg
1318	day = int(daytime+0.1/day_step)
1319	! time = max(daytime-day,0.0)
1320	!Al1&jyg: correction de bug
1321	!cc time = real(mod(it,day_step))/day_step
1322	time = time_ini/24.+real(mod(it,day_step))/day_step
1323	! print*,'daytime nxt time',daytime,time
1324	it=it+1
1325
1326	enddo
1327
1328	!Al1
1329	if (ecrit_slab_oc.ne.-1) close(97)
1330
1331	!Al1 Call to 1D equivalent of dynredem (an,mois,jour,heure ?)
1332	! -------------------------------------
1333	call dyn1dredem("restart1dyn.nc", &
1334	& plev,play,phi,phis,presnivs, &
1335	& u,v,temp,q,omega2)
1336
1337	CALL abort_gcm ('lmdz1d ','The End ',0)
1338
1339	END SUBROUTINE old_lmdz1d
1340
1341	#include "old_1DUTILS_read_interp.h"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format