Context Navigation

readaerosol.F90 @ 1321

Last change on this file since 1321 was 1321, checked in by Laurent Fairhead, 15 years ago

The ability to read annual aerosol forcing files that had disappeared in
recent versions of the code is put back in

On ré-intégre la possibilité de lire des fichiers de forçage aérosols de
type annuel

Property svn:eol-style set to native
Property svn:keywords set to Author Date Id Revision

File size: 23.6 KB

Line
1	! $Id: readaerosol.F90 1321 2010-03-09 14:42:32Z fairhead $
2	!
3	MODULE readaerosol_mod
4
5	REAL, SAVE :: not_valid=-333.
6
7	CONTAINS
8
9	SUBROUTINE readaerosol(name_aero, type, iyr_in, klev_src, pt_ap, pt_b, pt_out, psurf, load)
10
11	!****************************************************************************************
12	! This routine will read the aersosol from file.
13	!
14	! Read a year data with get_aero_fromfile depending on aer_type :
15	! - actuel : read year 1980
16	! - preind : read natural data
17	! - scenario : read one or two years and do eventually linare time interpolation
18	!
19	! Return pointer, pt_out, to the year read or result from interpolation
20	!****************************************************************************************
21	USE dimphy
22
23	IMPLICIT NONE
24
25	INCLUDE "iniprint.h"
26
27	! Input arguments
28	CHARACTER(len=7), INTENT(IN) :: name_aero
29	CHARACTER(len=*), INTENT(IN) :: type ! correspond to aer_type in clesphys.h
30	INTEGER, INTENT(IN) :: iyr_in
31
32	! Output
33	INTEGER, INTENT(OUT) :: klev_src
34	REAL, POINTER, DIMENSION(:) :: pt_ap ! Pointer for describing the vertical levels
35	REAL, POINTER, DIMENSION(:) :: pt_b ! Pointer for describing the vertical levels
36	REAL, POINTER, DIMENSION(:,:,:) :: pt_out ! The massvar distributions, DIMENSION(klon, klev_src, 12)
37	REAL, DIMENSION(klon,12), INTENT(OUT) :: psurf ! Surface pression for 12 months
38	REAL, DIMENSION(klon,12), INTENT(OUT) :: load ! Aerosol mass load in each column for 12 months
39
40	! Local variables
41	CHARACTER(len=4) :: cyear
42	REAL, POINTER, DIMENSION(:,:,:) :: pt_2
43	REAL, DIMENSION(klon,12) :: psurf2, load2
44	REAL :: p0 ! Reference pressure
45	INTEGER :: iyr1, iyr2, klev_src2
46	INTEGER :: it, k, i
47	LOGICAL, PARAMETER :: lonlyone=.FALSE.
48
49	!****************************************************************************************
50	! Read data depending on aer_type
51	!
52	!****************************************************************************************
53
54	IF (type == 'actuel') THEN
55	! Read and return data for year 1980
56	!****************************************************************************************
57	cyear='1980'
58	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
59	! pt_out has dimensions (klon, klev_src, 12)
60	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
61
62
63	ELSE IF (type == 'preind') THEN
64	! Read and return data from file with suffix .nat
65	!****************************************************************************************
66	cyear='.nat'
67	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
68	! pt_out has dimensions (klon, klev_src, 12)
69	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
70
71	ELSE IF (type == 'annuel') THEN
72	! Read and return data from scenario annual files
73	!****************************************************************************************
74	WRITE(cyear,'(I4)') iyr_in
75	WRITE(lunout,*) 'get_aero 3 iyr_in=', iyr_in,' ',cyear
76	! get_aero_fromfile returns pt_out allocated and initialized with data for nbr_tsteps month
77	! pt_out has dimensions (klon, klev_src, 12)
78	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
79
80	ELSE IF (type == 'scenario') THEN
81	! Read data depending on actual year and interpolate if necessary
82	!****************************************************************************************
83	IF (iyr_in .LT. 1850) THEN
84	cyear='.nat'
85	WRITE(lunout,*) 'get_aero 1 iyr_in=', iyr_in,' ',cyear
86	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
87	! pt_out has dimensions (klon, klev_src, 12)
88	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
89
90	ELSE IF (iyr_in .GE. 2100) THEN
91	cyear='2100'
92	WRITE(lunout,*) 'get_aero 2 iyr_in=', iyr_in,' ',cyear
93	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
94	! pt_out has dimensions (klon, klev_src, 12)
95	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
96
97	ELSE
98	! Read data from 2 decades and interpolate to actual year
99	! a) from actual 10-yr-period
100	IF (iyr_in.LT.1900) THEN
101	iyr1 = 1850
102	iyr2 = 1900
103	ELSE IF (iyr_in.GE.1900.AND.iyr_in.LT.1920) THEN
104	iyr1 = 1900
105	iyr2 = 1920
106	ELSE
107	iyr1 = INT(iyr_in/10)*10
108	iyr2 = INT(1+iyr_in/10)*10
109	ENDIF
110
111	WRITE(cyear,'(I4)') iyr1
112	WRITE(lunout,*) 'get_aero 3 iyr_in=', iyr_in,' ',cyear
113	! get_aero_fromfile returns pt_out allocated and initialized with data for 12 month
114	! pt_out has dimensions (klon, klev_src, 12)
115	CALL get_aero_fromfile(name_aero, cyear, klev_src, pt_ap, pt_b, p0, pt_out, psurf, load)
116
117	! If to read two decades:
118	IF (.NOT.lonlyone) THEN
119
120	! b) from the next following one
121	WRITE(cyear,'(I4)') iyr2
122	WRITE(lunout,*) 'get_aero 4 iyr_in=', iyr_in,' ',cyear
123
124	NULLIFY(pt_2)
125	! get_aero_fromfile returns pt_2 allocated and initialized with data for 12 month
126	! pt_2 has dimensions (klon, klev_src, 12)
127	CALL get_aero_fromfile(name_aero, cyear, klev_src2, pt_ap, pt_b, p0, pt_2, psurf2, load2)
128	! Test for same number of vertical levels
129	IF (klev_src /= klev_src2) THEN
130	WRITE(lunout,*) 'Two aerosols files with different number of vertical levels is not allowded'
131	CALL abort_gcm('readaersosol','Error in number of vertical levels',1)
132	END IF
133
134	! Linare interpolate to the actual year:
135	DO it=1,12
136	DO k=1,klev_src
137	DO i = 1, klon
138	pt_out(i,k,it) = &
139	pt_out(i,k,it) - FLOAT(iyr_in-iyr1)/FLOAT(iyr2-iyr1) * &
140	(pt_out(i,k,it) - pt_2(i,k,it))
141	END DO
142	END DO
143
144	DO i = 1, klon
145	psurf(i,it) = &
146	psurf(i,it) - FLOAT(iyr_in-iyr1)/FLOAT(iyr2-iyr1) * &
147	(psurf(i,it) - psurf2(i,it))
148
149	load(i,it) = &
150	load(i,it) - FLOAT(iyr_in-iyr1)/FLOAT(iyr2-iyr1) * &
151	(load(i,it) - load2(i,it))
152	END DO
153	END DO
154
155	! Deallocate pt_2 no more needed
156	DEALLOCATE(pt_2)
157
158	END IF ! lonlyone
159	END IF ! iyr_in .LT. 1850
160
161	ELSE
162	WRITE(lunout,*)'This option is not implemented : aer_type = ', type
163	CALL abort_gcm('readaerosol','Error : aer_type parameter not accepted',1)
164	END IF ! type
165
166
167	END SUBROUTINE readaerosol
168
169
170	SUBROUTINE get_aero_fromfile(varname, cyr, klev_src, pt_ap, pt_b, p0, pt_year, psurf_out, load_out)
171	!****************************************************************************************
172	! Read 12 month aerosol from file and distribute to local process on physical grid.
173	! Vertical levels, klev_src, may differ from model levels if new file format.
174	!
175	! For mpi_root and master thread :
176	! 1) Open file
177	! 2) Find vertical dimension klev_src
178	! 3) Read field month by month
179	! 4) Close file
180	! 5) Transform the global field from 2D(iim, jjp+1) to 1D(klon_glo)
181	! - Also the levels and the latitudes have to be inversed
182	!
183	! For all processes and threads :
184	! 6) Scatter global field(klon_glo) to local process domain(klon)
185	! 7) Test for negative values
186	!****************************************************************************************
187
188	USE netcdf
189	USE dimphy
190	USE mod_grid_phy_lmdz
191	USE mod_phys_lmdz_para
192	USE iophy, ONLY : io_lon, io_lat
193
194	IMPLICIT NONE
195
196	INCLUDE "dimensions.h"
197	INCLUDE "iniprint.h"
198
199	! Input argumets
200	CHARACTER(len=7), INTENT(IN) :: varname
201	CHARACTER(len=4), INTENT(IN) :: cyr
202
203	! Output arguments
204	INTEGER, INTENT(OUT) :: klev_src ! Number of vertical levels in file
205	REAL, POINTER, DIMENSION(:) :: pt_ap ! Pointer for describing the vertical levels
206	REAL, POINTER, DIMENSION(:) :: pt_b ! Pointer for describing the vertical levels
207	REAL :: p0 ! Reference pressure value
208	REAL, POINTER, DIMENSION(:,:,:) :: pt_year ! Pointer-variabale from file, 12 month, grid : klon,klev_src
209	REAL, DIMENSION(klon,12), INTENT(OUT) :: psurf_out ! Surface pression for 12 months
210	REAL, DIMENSION(klon,12), INTENT(OUT) :: load_out ! Aerosol mass load in each column
211	INTEGER :: nbr_tsteps ! number of month in file read
212
213	! Local variables
214	CHARACTER(len=30) :: fname
215	CHARACTER(len=8) :: filename='aerosols'
216	CHARACTER(len=30) :: cvar
217	INTEGER :: ncid, dimid, varid
218	INTEGER :: imth, i, j, k, ierr
219	REAL :: npole, spole
220	REAL, ALLOCATABLE, DIMENSION(:,:,:) :: varmth
221	REAL, ALLOCATABLE, DIMENSION(:,:,:,:) :: varyear ! Global variable read from file, 12 month
222	REAL, ALLOCATABLE, DIMENSION(:,:,:) :: varyear_glo1D !(klon_glo, klev_src, 12)
223	REAL, ALLOCATABLE, DIMENSION(:) :: varktmp
224
225	REAL, DIMENSION(iim,jjm+1,12) :: psurf_glo2D ! Surface pression for 12 months on dynamics global grid
226	REAL, DIMENSION(klon_glo,12) :: psurf_glo1D ! -"- on physical global grid
227	REAL, DIMENSION(iim,jjm+1,12) :: load_glo2D ! Load for 12 months on dynamics global grid
228	REAL, DIMENSION(klon_glo,12) :: load_glo1D ! -"- on physical global grid
229	REAL, DIMENSION(iim,jjm+1) :: vartmp
230	REAL, DIMENSION(iim) :: lon_src ! longitudes in file
231	REAL, DIMENSION(jjm+1) :: lat_src, lat_src_inv ! latitudes in file
232	LOGICAL :: new_file ! true if new file format detected
233	LOGICAL :: invert_lat ! true if the field has to be inverted for latitudes
234
235
236	! Deallocate pointers
237	IF (ASSOCIATED(pt_ap)) DEALLOCATE(pt_ap)
238	IF (ASSOCIATED(pt_b)) DEALLOCATE(pt_b)
239
240	IF (is_mpi_root .AND. is_omp_root) THEN
241
242	! 1) Open file
243	!****************************************************************************************
244	fname = filename//cyr//'.nc'
245
246	WRITE(lunout,*) 'reading ', TRIM(fname)
247	CALL check_err( nf90_open(TRIM(fname), NF90_NOWRITE, ncid) )
248
249	! Test for equal longitudes and latitudes in file and model
250	!****************************************************************************************
251	! Read and test longitudes
252	CALL check_err( nf90_inq_varid(ncid, 'lon', varid) )
253	CALL check_err( nf90_get_var(ncid, varid, lon_src(:)) )
254
255	IF (maxval(ABS(lon_src - io_lon)) > 0.001) THEN
256	WRITE(lunout,*) 'Problem in longitudes read from file : ',TRIM(fname)
257	WRITE(lunout,*) 'longitudes in file ', TRIM(fname),' : ', lon_src
258	WRITE(lunout,*) 'longitudes in model :', io_lon
259
260	CALL abort_gcm('get_aero_fromfile', 'longitudes are not the same in file and model',1)
261	END IF
262
263	! Read and test latitudes
264	CALL check_err( nf90_inq_varid(ncid, 'lat', varid) )
265	CALL check_err( nf90_get_var(ncid, varid, lat_src(:)) )
266
267	! Invert source latitudes
268	DO j = 1, jjm+1
269	lat_src_inv(j) = lat_src(jjm+1 +1 -j)
270	END DO
271
272	IF (maxval(ABS(lat_src - io_lat)) < 0.001) THEN
273	! Latitudes are the same
274	invert_lat=.FALSE.
275	ELSE IF (maxval(ABS(lat_src_inv - io_lat)) < 0.001) THEN
276	! Inverted source latitudes correspond to model latitudes
277	WRITE(lunout,*) 'latitudes will be inverted for file : ',TRIM(fname)
278	invert_lat=.TRUE.
279	ELSE
280	WRITE(lunout,*) 'Problem in latitudes read from file : ',TRIM(fname)
281	WRITE(lunout,*) 'latitudes in file ', TRIM(fname),' : ', lat_src
282	WRITE(lunout,*) 'latitudes in model :', io_lat
283	CALL abort_gcm('get_aero_fromfile', 'latitudes do not correspond between file and model',1)
284	END IF
285
286	! 1.5) Check number of month in file opened
287	!
288	!**************************************************************************************************
289	ierr = nf90_inq_dimid(ncid, 'TIME',dimid)
290	CALL check_err( nf90_inquire_dimension(ncid, dimid, len = nbr_tsteps) )
291	! IF (nbr_tsteps /= 12 .AND. nbr_tsteps /= 14) THEN
292	IF (nbr_tsteps /= 12 ) THEN
293	CALL abort_gcm('get_aero_fromfile', 'not the right number of months in aerosol file read (should be 12 for the moment)',1)
294	ENDIF
295
296
297	! 2) Check if old or new file is avalabale.
298	! New type of file should contain the dimension 'lev'
299	! Old type of file should contain the dimension 'PRESNIVS'
300	!****************************************************************************************
301	ierr = nf90_inq_dimid(ncid, 'lev', dimid)
302	IF (ierr /= NF90_NOERR) THEN
303	! Coordinate axe lev not found. Check for presnivs.
304	ierr = nf90_inq_dimid(ncid, 'PRESNIVS', dimid)
305	IF (ierr /= NF90_NOERR) THEN
306	! Dimension PRESNIVS not found either
307	CALL abort_gcm('get_aero_fromfile', 'dimension lev or presnivs not in file',1)
308	ELSE
309	! Old file found
310	new_file=.FALSE.
311	WRITE(lunout,*) 'Vertical interpolation for ',TRIM(varname),' will not be done'
312	END IF
313	ELSE
314	! New file found
315	new_file=.TRUE.
316	WRITE(lunout,*) 'Vertical interpolation for ',TRIM(varname),' will be done'
317	END IF
318
319	! 2) Find vertical dimension klev_src
320	!****************************************************************************************
321	CALL check_err( nf90_inquire_dimension(ncid, dimid, len = klev_src) )
322
323	! Allocate variables depending on the number of vertical levels
324	ALLOCATE(varmth(iim, jjm+1, klev_src), varyear(iim, jjm+1, klev_src, 12), stat=ierr)
325	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 1',1)
326
327	ALLOCATE(pt_ap(klev_src), pt_b(klev_src), varktmp(klev_src), stat=ierr)
328	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 2',1)
329
330	! 3) Read all variables from file
331	! There is 2 options for the file structure :
332	! new_file=TRUE : read varyear, ps, pt_ap and pt_b
333	! new_file=FALSE : read varyear month by month
334	!****************************************************************************************
335
336	IF (new_file) THEN
337
338	! ++) Read the aerosol concentration month by month and concatenate to total variable varyear
339	!****************************************************************************************
340	! Get variable id
341	CALL check_err( nf90_inq_varid(ncid, TRIM(varname), varid) )
342
343	! Get the variable
344	CALL check_err( nf90_get_var(ncid, varid, varyear(:,:,:,:)) )
345
346	! ++) Read surface pression, 12 month in one variable
347	!****************************************************************************************
348	! Get variable id
349	CALL check_err( nf90_inq_varid(ncid, "ps", varid) )
350	! Get the variable
351	CALL check_err( nf90_get_var(ncid, varid, psurf_glo2D) )
352
353	! ++) Read mass load, 12 month in one variable
354	!****************************************************************************************
355	! Get variable id
356	CALL check_err( nf90_inq_varid(ncid, "load_"//TRIM(varname), varid) )
357	! Get the variable
358	CALL check_err( nf90_get_var(ncid, varid, load_glo2D) )
359
360	! ++) Read ap
361	!****************************************************************************************
362	! Get variable id
363	CALL check_err( nf90_inq_varid(ncid, "ap", varid) )
364	! Get the variable
365	CALL check_err( nf90_get_var(ncid, varid, pt_ap) )
366
367	! ++) Read b
368	!****************************************************************************************
369	! Get variable id
370	CALL check_err( nf90_inq_varid(ncid, "b", varid) )
371	! Get the variable
372	CALL check_err( nf90_get_var(ncid, varid, pt_b) )
373
374	! ++) Read p0 : reference pressure
375	!****************************************************************************************
376	! Get variable id
377	CALL check_err( nf90_inq_varid(ncid, "p0", varid) )
378	! Get the variable
379	CALL check_err( nf90_get_var(ncid, varid, p0) )
380
381
382	ELSE ! old file
383
384	! ++) Read the aerosol concentration month by month and concatenate to total variable varyear
385	!****************************************************************************************
386	DO imth=1, 12
387	IF (imth.EQ.1) THEN
388	cvar=TRIM(varname)//'JAN'
389	ELSE IF (imth.EQ.2) THEN
390	cvar=TRIM(varname)//'FEB'
391	ELSE IF (imth.EQ.3) THEN
392	cvar=TRIM(varname)//'MAR'
393	ELSE IF (imth.EQ.4) THEN
394	cvar=TRIM(varname)//'APR'
395	ELSE IF (imth.EQ.5) THEN
396	cvar=TRIM(varname)//'MAY'
397	ELSE IF (imth.EQ.6) THEN
398	cvar=TRIM(varname)//'JUN'
399	ELSE IF (imth.EQ.7) THEN
400	cvar=TRIM(varname)//'JUL'
401	ELSE IF (imth.EQ.8) THEN
402	cvar=TRIM(varname)//'AUG'
403	ELSE IF (imth.EQ.9) THEN
404	cvar=TRIM(varname)//'SEP'
405	ELSE IF (imth.EQ.10) THEN
406	cvar=TRIM(varname)//'OCT'
407	ELSE IF (imth.EQ.11) THEN
408	cvar=TRIM(varname)//'NOV'
409	ELSE IF (imth.EQ.12) THEN
410	cvar=TRIM(varname)//'DEC'
411	END IF
412
413	! Get variable id
414	CALL check_err( nf90_inq_varid(ncid, TRIM(cvar), varid) )
415
416	! Get the variable
417	CALL check_err( nf90_get_var(ncid, varid, varmth) )
418
419	! Store in variable for the whole year
420	varyear(:,:,:,imth)=varmth(:,:,:)
421
422	END DO
423
424	! Putting dummy
425	psurf_glo2D(:,:,:) = not_valid
426	load_glo2D(:,:,:) = not_valid
427	pt_ap(:) = not_valid
428	pt_b(:) = not_valid
429
430	END IF
431
432	! 4) Close file
433	!****************************************************************************************
434	CALL check_err( nf90_close(ncid) )
435
436
437	! 5) Transform the global field from 2D(iim, jjp+1) to 1D(klon_glo)
438	!****************************************************************************************
439	! Test if vertical levels have to be inversed
440
441	IF ((pt_b(1) < pt_b(klev_src)) .OR. .NOT. new_file) THEN
442	! WRITE(lunout,*) 'Vertical axis in file ',TRIM(fname), ' needs to be inverted'
443	! WRITE(lunout,*) 'before pt_ap = ', pt_ap
444	! WRITE(lunout,*) 'before pt_b = ', pt_b
445
446	! Inverse vertical levels for varyear
447	DO imth=1, 12
448	varmth(:,:,:) = varyear(:,:,:,imth) ! use varmth temporarly
449	DO k=1, klev_src
450	DO j=1, jjm+1
451	DO i=1,iim
452	varyear(i,j,k,imth) = varmth(i,j,klev_src+1-k)
453	END DO
454	END DO
455	END DO
456	END DO
457
458	! Inverte vertical axes for pt_ap and pt_b
459	varktmp(:) = pt_ap(:)
460	DO k=1, klev_src
461	pt_ap(k) = varktmp(klev_src+1-k)
462	END DO
463
464	varktmp(:) = pt_b(:)
465	DO k=1, klev_src
466	pt_b(k) = varktmp(klev_src+1-k)
467	END DO
468	WRITE(lunout,*) 'after pt_ap = ', pt_ap
469	WRITE(lunout,*) 'after pt_b = ', pt_b
470
471	ELSE
472	WRITE(lunout,*) 'Vertical axis in file ',TRIM(fname), ' is ok, no vertical inversion is done'
473	WRITE(lunout,*) 'pt_ap = ', pt_ap
474	WRITE(lunout,*) 'pt_b = ', pt_b
475	END IF
476
477	! - Invert latitudes if necessary
478	DO imth=1, 12
479	IF (invert_lat) THEN
480
481	! Invert latitudes for the variable
482	varmth(:,:,:) = varyear(:,:,:,imth) ! use varmth temporarly
483	DO k=1,klev_src
484	DO j=1,jjm+1
485	DO i=1,iim
486	varyear(i,j,k,imth) = varmth(i,jjm+1+1-j,k)
487	END DO
488	END DO
489	END DO
490
491	! Invert latitudes for surface pressure
492	vartmp(:,:) = psurf_glo2D(:,:,imth)
493	DO j=1, jjm+1
494	DO i=1,iim
495	psurf_glo2D(i,j,imth)= vartmp(i,jjm+1+1-j)
496	END DO
497	END DO
498
499	! Invert latitudes for the load
500	vartmp(:,:) = load_glo2D(:,:,imth)
501	DO j=1, jjm+1
502	DO i=1,iim
503	load_glo2D(i,j,imth)= vartmp(i,jjm+1+1-j)
504	END DO
505	END DO
506	END IF ! invert_lat
507
508	! Do zonal mead at poles and distribut at whole first and last latitude
509	DO k=1, klev_src
510	npole=0. ! North pole, j=1
511	spole=0. ! South pole, j=jjm+1
512	DO i=1,iim
513	npole = npole + varyear(i,1,k,imth)
514	spole = spole + varyear(i,jjm+1,k,imth)
515	END DO
516	npole = npole/FLOAT(iim)
517	spole = spole/FLOAT(iim)
518	varyear(:,1, k,imth) = npole
519	varyear(:,jjm+1,k,imth) = spole
520	END DO
521	END DO ! imth
522
523	ALLOCATE(varyear_glo1D(klon_glo, klev_src, 12), stat=ierr)
524	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 3',1)
525
526	! Transform from 2D to 1D field
527	CALL grid2Dto1D_glo(varyear,varyear_glo1D)
528	CALL grid2Dto1D_glo(psurf_glo2D,psurf_glo1D)
529	CALL grid2Dto1D_glo(load_glo2D,load_glo1D)
530
531	ELSE
532	ALLOCATE(varyear_glo1D(0,0,0))
533	END IF ! is_mpi_root .AND. is_omp_root
534
535	!$OMP BARRIER
536
537	! 6) Distribute to all processes
538	! Scatter global field(klon_glo) to local process domain(klon)
539	! and distribute klev_src to all processes
540	!****************************************************************************************
541
542	! Distribute klev_src
543	CALL bcast(klev_src)
544
545	! Allocate and distribute pt_ap and pt_b
546	IF (.NOT. ASSOCIATED(pt_ap)) THEN ! if pt_ap is allocated also pt_b is allocated
547	ALLOCATE(pt_ap(klev_src), pt_b(klev_src), stat=ierr)
548	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 4',1)
549	END IF
550	CALL bcast(pt_ap)
551	CALL bcast(pt_b)
552
553	! Allocate space for output pointer variable at local process
554	IF (ASSOCIATED(pt_year)) DEALLOCATE(pt_year)
555	ALLOCATE(pt_year(klon, klev_src, 12), stat=ierr)
556	IF (ierr /= 0) CALL abort_gcm('get_aero_fromfile', 'pb in allocation 5',1)
557
558	! Scatter global field to local domain at local process
559	CALL scatter(varyear_glo1D, pt_year)
560	CALL scatter(psurf_glo1D, psurf_out)
561	CALL scatter(load_glo1D, load_out)
562
563	! 7) Test for negative values
564	!****************************************************************************************
565	IF (MINVAL(pt_year) < 0.) THEN
566	WRITE(lunout,*) 'Warning! Negative values read from file :', fname
567	END IF
568
569	END SUBROUTINE get_aero_fromfile
570
571
572	SUBROUTINE check_err(status)
573	USE netcdf
574	IMPLICIT NONE
575
576	INCLUDE "iniprint.h"
577	INTEGER, INTENT (IN) :: status
578
579	IF (status /= NF90_NOERR) THEN
580	WRITE(lunout,*) 'Error in get_aero_fromfile ',status
581	CALL abort_gcm('get_aero_fromfile',trim(nf90_strerror(status)),1)
582	END IF
583
584	END SUBROUTINE check_err
585
586
587	END MODULE readaerosol_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format