Changeset 3049

Timestamp:

Oct 29, 2017, 11:13:59 AM (7 years ago)

Author:

Laurent Fairhead

Message:

Replacing iniprint

Location:

LMDZ6/branches/DYNAMICO-conv/libf

Files:

• dynphy_lonlat/inigeomphy_mod.F90 (modified) (4 diffs)
• phy_common/geometry_mod.F90 (modified) (5 diffs)
• phy_common/init_print_control_mod.F90 (added)
• phy_common/mod_phys_lmdz_mpi_data.F90 (modified) (4 diffs)
• phy_common/mod_phys_lmdz_omp_data.F90 (modified) (4 diffs)
• phy_common/mod_phys_lmdz_para.F90 (modified) (1 diff)
• phy_common/print_control_mod.F90 (modified) (1 diff)
• phydev/inifis_mod.F90 (modified) (2 diffs)
• phylmd/inifis_mod.F90 (modified) (1 diff)

LMDZ6/branches/DYNAMICO-conv/libf/dynphy_lonlat/inigeomphy_mod.F90

@@ -76 +76 @@
   REAL,ALLOCATABLE,SAVE :: boundslonfi(:,:)
   REAL,ALLOCATABLE,SAVE :: boundslatfi(:,:)
-!$OMP THREADPRIVATE (latfi,lonfi,cufi,cvfi,airefi,boundslonfi,boundslatfi)
+  INTEGER,ALLOCATABLE,SAVE :: ind_cell_glo_fi(:)
+!$OMP THREADPRIVATE (latfi,lonfi,cufi,cvfi,airefi,boundslonfi,boundslatfi,ind_cell_glo_fi)
 
   ! Initialize Physics distibution and parameters and interface with dynamics
@@ -93 +94 @@
   
   DO i=1,iim
+   boundslon_reg(i,east)=rlonu(i+1) 
    boundslon_reg(i,west)=rlonu(i) 
-   boundslon_reg(i,east)=rlonu(i+1) 
   ENDDO
 
@@ -204 +205 @@
   ALLOCATE(boundslonfi(klon_omp,4))
   ALLOCATE(boundslatfi(klon_omp,4))
+  ALLOCATE(ind_cell_glo_fi(klon_omp))
 
 
@@ -214 +216 @@
   boundslonfi(1:klon_omp,:) = boundslonfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:)
   boundslatfi(1:klon_omp,:) = boundslatfi_glo(offset+klon_omp_begin:offset+klon_omp_end,:)
+  ind_cell_glo_fi(1:klon_omp)=(/ (i,i=offset+klon_omp_begin,offset+klon_omp_end) /)
 
   ! copy over local grid longitudes and latitudes
   CALL init_geometry(klon_omp,lonfi,latfi,boundslonfi,boundslatfi, &
-                     airefi,cufi,cvfi)
+                     airefi,ind_cell_glo_fi,cufi,cvfi)
 
   ! copy over preff , ap(), bp(), etc 

LMDZ6/branches/DYNAMICO-conv/libf/phy_common/geometry_mod.F90

@@ -30 +30 @@
 !$OMP THREADPRIVATE(cell_area)
 
+  INTEGER,SAVE,ALLOCATABLE :: ind_cell_glo(:)      ! global indice of a local cell
+!$OMP THREADPRIVATE(ind_cell_glo)
 
 CONTAINS
@@ -35 +37 @@
   SUBROUTINE init_geometry(klon,longitude_,latitude_, &
                            boundslon_,boundslat_, &
-                           cell_area_,dx_,dy_)
+                           cell_area_,ind_cell_glo_,dx_,dy_)
   USE mod_grid_phy_lmdz, ONLY: nvertex
   USE nrtype, ONLY : PI
@@ -45 +47 @@
     REAL,INTENT(IN) :: boundslat_(klon,nvertex)
     REAL,INTENT(IN) :: cell_area_(klon)
+    INTEGER,OPTIONAL,INTENT(IN) :: ind_cell_glo_(klon)
     REAL,OPTIONAL,INTENT(IN) :: dx_(klon)
     REAL,OPTIONAL,INTENT(IN) :: dy_(klon)
@@ -55 +58 @@
     ALLOCATE(boundslat(klon,nvertex))
     ALLOCATE(cell_area(klon))
+    IF (PRESENT(ind_cell_glo_)) ALLOCATE(ind_cell_glo(klon))
     IF (PRESENT(dx_)) ALLOCATE(dx(klon))
     IF (PRESENT(dy_))ALLOCATE(dy(klon))
@@ -65 +69 @@
     boundslat(:,:) = boundslat_(:,:)
     cell_area(:) = cell_area_(:)
+    IF (PRESENT(ind_cell_glo_)) ind_cell_glo(:) = ind_cell_glo_(:)
     IF (PRESENT(dx_)) dx(:) = dx_(:)
     IF (PRESENT(dy_)) dy(:) = dy_(:)

LMDZ6/branches/DYNAMICO-conv/libf/phy_common/mod_phys_lmdz_mpi_data.F90

@@ -3 +3 @@
 !
 MODULE mod_phys_lmdz_mpi_data
-!  USE mod_const_mpi
   
   INTEGER,SAVE :: ii_begin
@@ -36 +35 @@
   INTEGER,SAVE :: mpi_size
   INTEGER,SAVE :: mpi_master
-!  INTEGER,SAVE :: mpi_root
   LOGICAL,SAVE :: is_mpi_root
   LOGICAL,SAVE :: is_using_mpi
   
   
-!  LOGICAL,SAVE :: is_north_pole
-!  LOGICAL,SAVE :: is_south_pole
   LOGICAL,SAVE :: is_north_pole_dyn
   LOGICAL,SAVE :: is_south_pole_dyn
@@ -50 +46 @@
 CONTAINS
   
-!  SUBROUTINE Init_phys_lmdz_mpi_data(iim,jjp1,nb_proc,distrib)
   SUBROUTINE init_phys_lmdz_mpi_data(nbp, nbp_lon, nbp_lat, communicator)
-!  USE mod_const_mpi, ONLY : COMM_LMDZ
   IMPLICIT NONE
 #ifdef CPP_MPI
     INCLUDE 'mpif.h'
 #endif
-    INTEGER,INTENT(in) :: nbp
-    INTEGER,INTENT(in) :: nbp_lon
-    INTEGER,INTENT(in) :: nbp_lat
-    INTEGER,INTENT(in) :: communicator
+    INTEGER,INTENT(IN) :: nbp
+    INTEGER,INTENT(IN) :: nbp_lon
+    INTEGER,INTENT(IN) :: nbp_lat
+    INTEGER,INTENT(IN) :: communicator
     
     INTEGER,ALLOCATABLE :: distrib(:)
@@ -189 +183 @@
 
   SUBROUTINE print_module_data
-!  USE print_control_mod, ONLY: lunout
+  USE print_control_mod, ONLY: lunout
   IMPLICIT NONE
-  INCLUDE "iniprint.h" 
+!  INCLUDE "iniprint.h" 
   
     WRITE(lunout,*) 'ii_begin =', ii_begin

LMDZ6/branches/DYNAMICO-conv/libf/phy_common/mod_phys_lmdz_omp_data.F90

@@ -7 +7 @@
   INTEGER,SAVE :: omp_rank
   LOGICAL,SAVE :: is_omp_root
+  LOGICAL,SAVE :: is_omp_master  ! alias of is_omp_root
   LOGICAL,SAVE :: is_using_omp
   LOGICAL,SAVE :: is_north_pole_phy, is_south_pole_phy
@@ -17 +18 @@
   INTEGER,SAVE :: klon_omp_begin
   INTEGER,SAVE :: klon_omp_end
-!$OMP  THREADPRIVATE(omp_rank,klon_omp,is_omp_root,klon_omp_begin,klon_omp_end)
+!$OMP  THREADPRIVATE(omp_rank,klon_omp,is_omp_root,is_omp_master,klon_omp_begin,klon_omp_end)
 !$OMP  THREADPRIVATE(is_north_pole_phy, is_south_pole_phy)
 
@@ -63 +64 @@
    ENDIF
 !$OMP END MASTER
-
+   is_omp_master=is_omp_root
 
 !$OMP MASTER 
@@ -106 +107 @@
 
   SUBROUTINE Print_module_data
+  USE print_control_mod, ONLY: lunout
   IMPLICIT NONE
-  INCLUDE "iniprint.h"
+!  INCLUDE "iniprint.h"
 
 !$OMP CRITICAL  

LMDZ6/branches/DYNAMICO-conv/libf/phy_common/mod_phys_lmdz_para.F90

@@ -49 +49 @@
   SUBROUTINE Test_transfert
   USE mod_grid_phy_lmdz
+  USE print_control_mod, ONLY: lunout
   IMPLICIT NONE
-    INCLUDE "iniprint.h"
+!    INCLUDE "iniprint.h"
  
     REAL :: Test_Field1d_glo(klon_glo,nbp_lev)

LMDZ6/branches/DYNAMICO-conv/libf/phy_common/print_control_mod.F90

@@ -7 +7 @@
 !$OMP THREADPRIVATE(lunout,prt_level,debug)
 
+  ! NB: Module variable Initializations done by set_print_control
+  !     routine from init_print_control_mod to avoid circular
+  !     module dependencies
+
 CONTAINS
 
-  SUBROUTINE init_print_control
-  USE ioipsl_getin_p_mod, ONLY : getin_p
-  USE mod_phys_lmdz_para, ONLY: is_omp_root, is_master
+  SUBROUTINE set_print_control(lunout_,prt_level_,debug_)
   IMPLICIT NONE
-
-    LOGICAL :: opened
-    INTEGER :: number
+    INTEGER :: lunout_
+    INTEGER :: prt_level_
+    LOGICAL :: debug_
+      
+    lunout = lunout_
+    prt_level = prt_level_
+    debug = debug_
     
-    !Config  Key  = prt_level
-    !Config  Desc = niveau d'impressions de débogage
-    !Config  Def  = 0
-    !Config  Help = Niveau d'impression pour le débogage
-    !Config         (0 = minimum d'impression)
-    prt_level = 0
-    CALL getin_p('prt_level',prt_level)
-
-    !Config  Key  = lunout
-    !Config  Desc = unite de fichier pour les impressions
-    !Config  Def  = 6
-    !Config  Help = unite de fichier pour les impressions 
-    !Config         (defaut sortie standard = 6)
-    lunout=6
-    CALL getin_p('lunout', lunout)
-
-    IF (is_omp_root) THEN
-      IF (lunout /= 5 .and. lunout /= 6) THEN
-         INQUIRE(FILE='lmdz.out_0000',OPENED=opened,NUMBER=number)
-         IF (opened) THEN
-           lunout=number
-         ELSE
-           OPEN(UNIT=lunout,FILE='lmdz.out_0000',ACTION='write',  &
-                STATUS='unknown',FORM='formatted')
-         ENDIF
-      ENDIF
-    ENDIF
-
-    !Config  Key  = debug
-    !Config  Desc = mode debogage
-    !Config  Def  = false
-    !Config  Help = positionne le mode debogage
-
-    debug = .FALSE.
-    CALL getin_p('debug',debug)
-    
-    IF (is_master) THEN
-      WRITE(lunout,*)"init_print_control: prt_level=",prt_level
-      WRITE(lunout,*)"init_print_control: lunout=",lunout
-      WRITE(lunout,*)"init_print_control: debug=",debug      
-    ENDIF
-    
-  END SUBROUTINE init_print_control  
+  END SUBROUTINE set_print_control
 
 END MODULE print_control_mod

LMDZ6/branches/DYNAMICO-conv/libf/phydev/inifis_mod.F90

@@ -1 @@
-! $Id: $
+! $Id$
 MODULE inifis_mod
 
@@ -6 +6 @@
   SUBROUTINE inifis(prad, pg, pr, pcpp)
   ! Initialize some physical constants and settings
-  USE print_control_mod, ONLY: init_print_control
+  USE init_print_control_mod, ONLY: init_print_control
   USE comcstphy, ONLY: rradius, & ! planet radius (m)
                        rr, & ! recuced gas constant: R/molar mass of atm

LMDZ6/branches/DYNAMICO-conv/libf/phylmd/inifis_mod.F90

@@ -6 +6 @@
   SUBROUTINE inifis(punjours, prad, pg, pr, pcpp)
   ! Initialize some physical constants and settings
-  USE print_control_mod, ONLY: init_print_control, lunout
+  USE init_print_control_mod, ONLY : init_print_control
+  USE print_control_mod, ONLY: lunout
   IMPLICIT NONE